/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #ifndef _RULER_HXX #define _RULER_HXX #include "svtools/svtdllapi.h" #include #include #include #include class MouseEvent; class TrackingEvent; class DataChangedEvent; /************************************************************************* Description ============ class Ruler This class is used for displaying a ruler, but it can also be used for setting or moving tabs and margins. -------------------------------------------------------------------------- WinBits WB_HORZ ruler is displayed horizontally WB_VERT ruler is displayed vertically WB_3DLOOK 3D look WB_BORDER border at the bottom/right margin WB_EXTRAFIELD Field in the upper left corner for displaying and selecting tabs, origin of coordinates, ... WB_RIGHT_ALIGNED Marks the vertical ruler as right aligned -------------------------------------------------------------------------- All ruler parameters are set in pixel units. This way double conversions and rounding errors are avoided and the ruler displays the margins at their actual position in the document. Because of this, the application can, for example in tables, do its own roundings and the positions on the ruler will still match those in the document. However, for the ruler to know how the document is displayed on the screen, some additional values have to be configured SetWinPos() sets the offset of the ruler's edit window. In doing so, the width of the window can also be configured. If there is a 0 among the values passed to the function, the position/width is automatically set to the width of the ruler. SetPagePos() sets the offset of the page relative to the edit window and the width of the page. If there is a 0 among the values passed to the function, the position/width is automatically set as if the page filled the whole edit window. SetBorderPos() sets the offset of the border. The position is relative to the upper/left margin of the window. This is needed when there are a horizontal and a vertical ruler visible at the same time. Example: aHRuler.SetBorderPos( aVRuler.GetSizePixel().Width()-1 ); SetNullOffset() sets the origin relative to the page. All the other values (margins, indentation, tabs, ...) refer to the origin, which is set with SetNullOffset(). The values are computed as described below: - WinPos (if both windows have the same parent) Point aHRulerPos = aHRuler.GetPosPixel(); Point aEditWinPos = aEditWin.GetPosPixel(); aHRuler.SetWinPos( aEditWinPos().X() - aHRulerPos.X() ); - PagePos Point aPagePos = aEditWin.LogicToPixel( aEditWin.GetPagePos() ); aHRuler.SetPagePos( aPagePos().X() ); - All other values Add the logical values, recompute as position and subtract the previously saved pixel positions (of PagePos and Null Offset). -------------------------------------------------------------------------- SetUnit() and SetZoom() configure which unit is used to display the values on the ruler. The following units are accepted: FUNIT_MM FUNIT_CM (Default) FUNIT_M FUNIT_KM FUNIT_INCH FUNIT_FOOT FUNIT_MILE FUNIT_POINT FUNIT_PICA -------------------------------------------------------------------------- SetMargin1() sets the upper/left margin and SetMargin2() sets the bottom/right margin. If these methods are called without arguments, no margins are displayed. Otherwise, the following arguments can be passed: long nPos - offset in pixels relative to the origin sal_uInt16 nStyle - bit style: RULER_MARGIN_SIZEABLE margin size can be changed The following bits can be set in addition to these styles: RULER_STYLE_INVISIBLE SetBorders() sets an array of margins. To do this, an array of type RulerBorder has to be passed. In the array, the following values have to be initialized: long nPos - offset in pixels relative to the origin long nWidth - column spacing in pixels (can also be 0, for example, for table columns) sal_uInt16 nStyle - bit style: RULER_BORDER_SIZEABLE Column spacing can be changed. This flag should only be set if the size of the spacing is changed, not that of a cell. RULER_BORDER_MOVEABLE Column spacing/border can be moved. Whenever table borders are to be moved, this flag should be set instead of SIZEABLE (SIZEABLE indicates that the size of a spacing, not that of a single cell can be changed). RULER_BORDER_VARIABLE Not all of the column spacings are equal RULER_BORDER_TABLE Table border. Whenever this style ist set, the column width must be 0. RULER_BORDER_SNAP Auxiliary line. Whenever this style is set, the column width must be 0. RULER_BORDER_MARGIN Margin. Whenever this style is set, the column width must be 0. The following bits can be set in addition to these styles: RULER_STYLE_INVISIBLE SetIndents() sets an array of indents. This method may only be used for horizontal rulers. A Ruler Indent must be passed as an argument, with the following values initialized: long nPos - offset relative to the origin in pixels sal_uInt16 nStyle - bit style: RULER_INDENT_TOP (indent of the first line) RULER_INDENT_BOTTOM (left/right indent) RULER_INDENT_BORDER (Vertical line that shows the border distance) The following bits can be set in addition to these styles: RULER_STYLE_DONTKNOW (for old position or for ambiguity) RULER_STYLE_INVISIBLE SetTabs() sets an array of tabs. This method may only be used for horizontal rulers. An array of type RulerTab must be passed as an argument, with the following values initialized: long nPos - offset relative to the origin in pixels sal_uInt16 nStyle - bit style: RULER_TAB_DEFAULT (can't be selected) RULER_TAB_LEFT RULER_TAB_CENTER RULER_TAB_RIGHT RULER_TAB_DECIMAL The following bits can be set in addition to these styles: RULER_STYLE_DONTKNOW (for old position of for ambiguity) RULER_STYLE_INVISIBLE SetLines() displays position lines in the ruler. An array of type RulerLine must be passed, with the following values initialized: long nPos - offset relative to the origin in pixels sal_uInt16 nStyle - bit style (has to be 0 currently) -------------------------------------------------------------------------- If the user should also be able to change the margins tabs, borders, ... in the ruler, a bit more effort is necessary. In this case, the StartDrag(), Drag() and EndDrag() methods have to be overridden. For the StartDrag() method it is possible to prevent dragging by returning FALSE. In the drag handler, the drag position must be queried and the values must be moved to the new position. This is done by calling the particular Set methods. While in the drag handler, the values are just cached and only afterward the ruler is redrawn. All the handlers can also be set as links with the particular Set..Hdl() methods. - StartDrag() Is called when dragging is started. If FALSE is returned, the dragging. won't be executed. If TRUE is returned, the dragging will be permitted. If the handler isn't overridden, FALSE will be returned. - EndDrag() Is called at the end of dragging. - Drag() Is called when dragging takes place. - Click() This handler is called when no element has been clicked on. The position can be queried with GetClickPos(). This way it is possible to, for example, ser tabs in the ruler. After calling the click handler, the drag, if any, is immediately triggered. This makes it possible to set a new tab in the click handler and then immediately move it. - DoubleClick() This handler is called when a double-click has been performed outside the special panel. The methods GetClickType(), GetClickAryPos() and GetClickPos() can be used to query what has been clicked on. This way you can, for example, show the tab dialog when a double-click is performed on a tab. In the drag handler it is possible to query what has been dragged and where it has been dragged. There are the following query methods: - GetDragType() Returns what has been dragged. RULER_TYPE_MARGIN1 RULER_TYPE_MARGIN2 RULER_TYPE_BORDER RULER_TYPE_INDENT RULER_TYPE_TAB - GetDragPos() Returns the pixel position to which the user has moved the mouse relative to the set zero-offset. - GetDragAryPos() Liefert den Index im Array zurueck, wenn ein Border, Indent oder ein Tab gedragt wird. Achtung: Es wird die Array-Position waehrend des gesammten Drag-Vorgangs von dem Item im Array was vor dem Drag gesetzt war zurueckgeben. Dadurch ist es zum Beispiel auch moeglich, einen Tab nicht mehr anzuzeigen, wenn die Maus nach unten/rechts aus dem Lineal gezogen wird. - GetDragSize() Wenn Borders gedragt werden, kann hierueber abgefragt werden, ob die Groesse bzw. welche Seite oder die Position geaendert werden soll. RULER_DRAGSIZE_MOVE oder 0 - Move RULER_DRAGSIZE_1 - Linke/obere Kante RULER_DRAGSIZE_2 - Rechte/untere Kante - IsDragDelete() Mit dieser Methode kann abgefragt werden, ob beim Draggen die Maus unten/rechts aus dem Fenster gezogen wurde. Damit kann zum Beispiel festgestellt werden, ob der Benutzer einen Tab loeschen will. - IsDragCanceled() Mit dieser Methode kann im EndDrag-Handler abgefragt werden, ob die Aktion abgebrochen wurde, indem der Anwender die Maus oben/links vom Fenster losgelassen hat oder ESC gedrueckt hat. In diesem Fall werden die Werte nicht uebernommen. Wird waehrend des Draggings die Maus oben/links aus dem Fenster gezogen, werden automatisch die alten Werte dargestellt, ohne das der Drag-Handler gerufen wird. Falls der Benutzer jedoch den Wert auf die alte Position zurueckgeschoben hat, liefert die Methode trotzdem sal_False. Falls dies vermieden werden soll, muss sich die Applikation im StartDrag- Handler den alten Wert merken und im EndDrag-Handler den Wert vergleichen. - GetDragScroll() Mit dieser Methode kann abgefragt werden, ob gescrollt werden soll. Es wird einer der folgenden Werte zurueckgegeben: RULER_SCROLL_NO - Drag-Position befindet sich an keinem Rand und somit muss nicht gescrollt werden. RULER_SCROLL_1 - Drag-Position befindet sich am linken/oberen Rand und somit sollte das Programm evt. ein Srcoll ausloesen. RULER_SCROLL_2 - Drag-Position befindet sich am rechten/unteren Rand und somit sollte das Programm evt. ein Srcoll ausloesen. - GetDragModifier() Liefert die Modifier-Tasten zurueck, die beim Starten des Drag- Vorgangs gedrueckt waren. Siehe MouseEvent. - GetClickPos() Liefert die Pixel-Position bezogen auf den eingestellten Null-Offset zurueck, wo der Anwender die Maus gedrueckt hat. - GetClickType() Liefert zurueck, was per DoubleClick betaetigt wird: RULER_TYPE_DONTKNOW (kein Element im Linealbereich) RULER_TYPE_OUTSIDE (ausserhalb des Linealbereichs) RULER_TYPE_MARGIN1 (nur Margin1-Kante) RULER_TYPE_MARGIN2 (nur Margin2-Kante) RULER_TYPE_BORDER (Border: GetClickAryPos()) RULER_TYPE_INDENT (Einzug: GetClickAryPos()) RULER_TYPE_TAB (Tab: GetClickAryPos()) - GetClickAryPos() Liefert den Index im Array zurueck, wenn ein Border, Indent oder ein Tab per DoubleClick betaetigt wird. - GetType() Mit dieser Methode kann man einen HitTest durchfuehren, um gegebenenfalls ueber das Abfangen des MouseButtonDown-Handlers auch ueber die rechte Maustaste etwas auf ein Item anzuwenden. Als Paramter ueber gibt man die Fensterposition und gegebenenfalls einen Pointer auf einen sal_uInt16, um die Array-Position eines Tabs, Indent oder Borders mitzubekommen. Als Type werden folgende Werte zurueckgegeben: RULER_TYPE_DONTKNOW (kein Element im Linealbereich) RULER_TYPE_OUTSIDE (ausserhalb des Linealbereichs) RULER_TYPE_MARGIN1 (nur Margin1-Kante) RULER_TYPE_MARGIN2 (nur Margin2-Kante) RULER_TYPE_BORDER (Border: GetClickAryPos()) RULER_TYPE_INDENT (Einzug: GetClickAryPos()) RULER_TYPE_TAB (Tab: GetClickAryPos()) Wenn der Drag-Vorgang abgebrochen werden soll, kann der Drag-Vorgang mit CancelDrag() abgebrochen werden. Folgende Methoden gibt es fuer die Drag-Steuerung: - IsDrag() Liefert sal_True zurueck, wenn sich das Lineal im Drag-Vorgang befindet. - CancelDrag() Bricht den Drag-Vorgang ab, falls einer durchgefuehrt wird. Dabei werden die alten Werte wieder hergestellt und der Drag und der EndDrag-Handler gerufen. Um vom Dokument ein Drag auszuloesen, gibt es folgende Methoden: - StartDocDrag() Dieser Methode werden der MouseEvent vom Dokumentfenster und was gedragt werden soll uebergeben. Wenn als DragType RULER_TYPE_DONTKNOW uebergeben wird, bestimmt das Lineal, was verschoben werden soll. Bei den anderen, wird der Drag nur dann gestartet, wenn auch an der uebergebenen Position ein entsprechendes Element gefunden wurde. Dies ist zun Beispiel dann notwendig, wenn zum Beispiel Einzuege und Spalten an der gleichen X-Position liegen. Der Rueckgabewert gibt an, ob der Drag ausgeloest wurde. Wenn ein Drag ausgeloest wird, uebernimmt das Lineal die normale Drag-Steuerung und verhaelt sich dann so, wie als wenn direkt in das Lineal geklickt wurde. So captured das Lineal die Mouse und uebernimmt auch die Steuerung des Cancel (ueber Tastatur, oder wenn die Mouse ueber oder links vom Lineal ruasgeschoben wird). Auch alle Handler werden gerufen (inkl. des StartDrag-Handlers). Wenn ein MouseEvent mit Click-Count 2 uebergeben wird auch der DoubleClick-Handler entsprechend gerufen. -------------------------------------------------------------------------- Fuer das Extra-Feld kann der Inhalt bestimmt werden und es gibt Handler, womit man bestimmte Aktionen abfangen kann. - ExtraDown() Dieser Handler wird gerufen, wenn im Extra-Feld die Maus gedrueckt wird. - SetExtraType() Mit dieser Methode kann festgelegt werden, was im ExtraFeld dargestellt werden soll. - ExtraType Was im Extrafeld dargestellt werden soll RULER_EXTRA_DONTKNOW (Nichts) RULER_EXTRA_NULLOFFSET (Koordinaaten-Kreuz) RULER_EXTRA_TAB (Tab) - sal_uInt16 nStyle Bitfeld als Style: RULER_STYLE_HIGHLIGHT (selektiert) RULER_TAB_... (ein Tab-Style) - GetExtraClick() Liefert die Anzahl der Mausclicks zurueck. Dadurch ist es zum Beispiel auch moeglich, auch durch einen DoubleClick im Extrafeld eine Aktion auszuloesen. - GetExtraModifier() Liefert die Modifier-Tasten zurueck, die beim Klicken in das Extra- Feld gedrueckt waren. Siehe MouseEvent. -------------------------------------------------------------------------- Weitere Hilfsfunktionen: - static Ruler::DrawTab() Mit dieser Methode kann ein Tab auf einem OutputDevice ausgegeben werden. Dadurch ist es moeglich, auch in Dialogen die Tabs so anzuzeigen, wie Sie im Lineal gemalt werden. Diese Methode gibt den Tab zentriert an der uebergebenen Position aus. Die Groesse der Tabs kann ueber die Defines RULER_TAB_WIDTH und RULER_TAB_HEIGHT bestimmt werden. -------------------------------------------------------------------------- Tips zur Benutzung des Lineals: - Bei dem Lineal muss weder im Drag-Modus noch sonst das Setzen der Werte in SetUpdateMode() geklammert werden. Denn das Lineal sorgt von sich aus dafuer, das wenn mehrere Werte gesetzt werden, diese automatisch zusammengefast werden und flackerfrei ausgegeben werden. - Initial sollten beim Lineal zuerst die Groessen, Positionen und Werte gesetzt werden, bevor es angezeigt wird. Dies ist deshalb wichtig, da ansonsten viele Werte unnoetig berechnet werden. - Wenn das Dokumentfenster, in dem sich das Lineal befindet aktiv bzw. deaktiv wird, sollten die Methoden Activate() und Deactivate() vom Lineal gerufen werden. Denn je nach Einstellungen und System wird die Anzeige entsprechend umgeschaltet. - Zum Beispiel sollte beim Drag von Tabs und Einzuegen nach Moeglichkeit die alten Positionen noch mit angezeigt werden. Dazu sollte zusaetzlich beim Setzen der Tabs und Einzuege als erstes im Array die alten Positionen eingetragen werden und mit dem Style RULER_STYLE_DONTKNOW verknuepft werden. Danach sollte im Array die restlichen Werte eingetragen werden. - Bei mehreren markierten Absaetzen und Tabellen-Zellen, sollten die Tabs und Einzuege in grau von der ersten Zelle, bzw. vom ersten Absatz angezeigt werden. Dies kann man auch ueber den Style RULER_STYLE_DONTKNOW erreichen. - Die Bemassungspfeile sollten immer dann angezeigt, wenn beim Drag die Alt-Taste (WW-Like) gedrueckt wird. Vielleicht sollte diese Einstellung auch immer vornehmbar sein und vielleicht beim Drag immer die Bemassungspfeile dargestellt werden. Bei allen Einstellung sollten die Werte immer auf ein vielfaches eines Wertes gerundet werden, da die Bildschirmausloesung sehr ungenau ist. - DoppelKlicks sollten folgendermassen behandelt werden (GetClickType()): - RULER_TYPE_DONTKNOW RULER_TYPE_MARGIN1 RULER_TYPE_MARGIN2 Wenn die Bedingunden GetClickPos() <= GetMargin1() oder GetClickPos() >= GetMargin2() oder der Type gleich RULER_TYPE_MARGIN1 oder RULER_TYPE_MARGIN2 ist, sollte ein SeitenDialog angezeigt werden, wo der Focus auf dem entsprechenden Rand steht - RULER_TYPE_BORDER Es sollte ein Spalten- oder Tabellen-Dialog angezeigt werden, wo der Focus auf der entsprechenden Spalte steht, die mit GetClickAryPos() abgefragt werden kann. - RULER_TYPE_INDENT Es sollte der Dialog angezeigt werden, wo die Einzuege eingestellt werden koennen. Dabei sollte der Focus auf dem Einzug stehen, der mit GetClickAryPos() ermittelt werden kann. - RULER_TYPE_TAB Es sollte ein TabDialog angezeigt werden, wo der Tab selektiert sein sollte, der ueber GetClickAryPos() abgefragt werden kann. *************************************************************************/ // ----------- // - WinBits - // ----------- #define WB_EXTRAFIELD ((WinBits)0x00004000) #define WB_RIGHT_ALIGNED ((WinBits)0x00008000) #define WB_STDRULER WB_HORZ // --------------- // - Ruler-Types - // --------------- struct ImplRulerHitTest; // -------------- // - Ruler-Type - // -------------- enum RulerType { RULER_TYPE_DONTKNOW, RULER_TYPE_OUTSIDE, RULER_TYPE_MARGIN1, RULER_TYPE_MARGIN2, RULER_TYPE_BORDER, RULER_TYPE_INDENT, RULER_TYPE_TAB }; enum RulerExtra { RULER_EXTRA_DONTKNOW, RULER_EXTRA_NULLOFFSET, RULER_EXTRA_TAB }; #define RULER_STYLE_HIGHLIGHT ((sal_uInt16)0x8000) #define RULER_STYLE_DONTKNOW ((sal_uInt16)0x4000) #define RULER_STYLE_INVISIBLE ((sal_uInt16)0x2000) #define RULER_DRAGSIZE_MOVE 0 #define RULER_DRAGSIZE_1 1 #define RULER_DRAGSIZE_2 2 #define RULER_MOUSE_BORDERMOVE 5 #define RULER_MOUSE_BORDERWIDTH 5 #define RULER_MOUSE_MARGINWIDTH 3 #define RULER_SCROLL_NO 0 #define RULER_SCROLL_1 1 #define RULER_SCROLL_2 2 // --------------- // - RulerMargin - // --------------- #define RULER_MARGIN_SIZEABLE ((sal_uInt16)0x0001) // --------------- // - RulerBorder - // --------------- #define RULER_BORDER_SIZEABLE ((sal_uInt16)0x0001) #define RULER_BORDER_MOVEABLE ((sal_uInt16)0x0002) #define RULER_BORDER_VARIABLE ((sal_uInt16)0x0004) #define RULER_BORDER_TABLE ((sal_uInt16)0x0008) #define RULER_BORDER_SNAP ((sal_uInt16)0x0010) #define RULER_BORDER_MARGIN ((sal_uInt16)0x0020) struct RulerBorder { long nPos; long nWidth; sal_uInt16 nStyle; //minimum/maximum position, supported for table borders/rows long nMinPos; long nMaxPos; }; // --------------- // - RulerIndent - // --------------- #define RULER_INDENT_TOP ((sal_uInt16)0x0000) #define RULER_INDENT_BOTTOM ((sal_uInt16)0x0001) #define RULER_INDENT_BORDER ((sal_uInt16)0x0002) #define RULER_INDENT_STYLE ((sal_uInt16)0x000F) struct RulerIndent { long nPos; sal_uInt16 nStyle; }; // ------------ // - RulerTab - // ------------ #define RULER_TAB_LEFT ((sal_uInt16)0x0000) #define RULER_TAB_RIGHT ((sal_uInt16)0x0001) #define RULER_TAB_DECIMAL ((sal_uInt16)0x0002) #define RULER_TAB_CENTER ((sal_uInt16)0x0003) #define RULER_TAB_DEFAULT ((sal_uInt16)0x0004) #define RULER_TAB_STYLE ((sal_uInt16)0x000F) #define RULER_TAB_RTL ((sal_uInt16)0x0010) struct RulerTab { long nPos; sal_uInt16 nStyle; }; #define RULER_TAB_WIDTH 7 #define RULER_TAB_HEIGHT 6 // ------------- // - RulerLine - // ------------- struct RulerLine { long nPos; sal_uInt16 nStyle; }; class ImplRulerData; // --------- // - Ruler - // --------- class SVT_DLLPUBLIC Ruler : public Window { private: VirtualDevice maVirDev; MapMode maMapMode; long mnBorderOff; long mnWinOff; long mnWinWidth; long mnWidth; long mnHeight; long mnVirOff; long mnVirWidth; long mnVirHeight; long mnBorderWidth; long mnStartDragPos; long mnDragPos; sal_uLong mnUpdateEvtId; ImplRulerData* mpSaveData; ImplRulerData* mpData; ImplRulerData* mpDragData; Rectangle maExtraRect; WinBits mnWinStyle; sal_uInt16 mnUnitIndex; sal_uInt16 mnDragAryPos; sal_uInt16 mnDragSize; sal_uInt16 mnDragScroll; sal_uInt16 mnDragModifier; sal_uInt16 mnExtraStyle; sal_uInt16 mnExtraClicks; sal_uInt16 mnExtraModifier; long mnCharWidth; long mnLineHeight; RulerExtra meExtraType; RulerType meDragType; MapUnit meSourceUnit; FieldUnit meUnit; Fraction maZoom; sal_Bool mbCalc; sal_Bool mbFormat; sal_Bool mbDrag; sal_Bool mbDragDelete; sal_Bool mbDragCanceled; sal_Bool mbAutoWinWidth; sal_Bool mbActive; sal_uInt8 mnUpdateFlags; Link maStartDragHdl; Link maDragHdl; Link maEndDragHdl; Link maClickHdl; Link maDoubleClickHdl; Link maExtraDownHdl; #ifdef _SV_RULER_CXX SVT_DLLPRIVATE void ImplVDrawLine( long nX1, long nY1, long nX2, long nY2 ); SVT_DLLPRIVATE void ImplVDrawRect( long nX1, long nY1, long nX2, long nY2 ); SVT_DLLPRIVATE void ImplVDrawText( long nX, long nY, const String& rText, long nMin = LONG_MIN, long nMax = LONG_MAX ); SVT_DLLPRIVATE void ImplDrawTicks( long nMin, long nMax, long nStart, long nCenter ); SVT_DLLPRIVATE void ImplDrawBorders( long nMin, long nMax, long nVirTop, long nVirBottom ); SVT_DLLPRIVATE void ImplDrawIndent( const Polygon& rPoly, sal_uInt16 nStyle ); SVT_DLLPRIVATE void ImplDrawIndents( long nMin, long nMax, long nVirTop, long nVirBottom ); SVT_DLLPRIVATE void ImplDrawTab( OutputDevice* pDevice, const Point& rPos, sal_uInt16 nStyle ); SVT_DLLPRIVATE void ImplDrawTabs( long nMin, long nMax, long nVirTop, long nVirBottom ); using Window::ImplInit; SVT_DLLPRIVATE void ImplInit( WinBits nWinBits ); SVT_DLLPRIVATE void ImplInitSettings( sal_Bool bFont, sal_Bool bForeground, sal_Bool bBackground ); SVT_DLLPRIVATE void ImplCalc(); SVT_DLLPRIVATE void ImplFormat(); SVT_DLLPRIVATE void ImplInitExtraField( sal_Bool bUpdate ); SVT_DLLPRIVATE void ImplInvertLines( sal_Bool bErase = sal_False ); SVT_DLLPRIVATE void ImplDraw(); SVT_DLLPRIVATE void ImplDrawExtra( sal_Bool bPaint = sal_False ); SVT_DLLPRIVATE void ImplUpdate( sal_Bool bMustCalc = sal_False ); using Window::ImplHitTest; SVT_DLLPRIVATE sal_Bool ImplHitTest( const Point& rPos, ImplRulerHitTest* pHitTest, sal_Bool bRequiredStyle = sal_False, sal_uInt16 nRequiredStyle = 0 ) const; SVT_DLLPRIVATE sal_Bool ImplDocHitTest( const Point& rPos, RulerType eDragType, ImplRulerHitTest* pHitTest ) const; SVT_DLLPRIVATE sal_Bool ImplStartDrag( ImplRulerHitTest* pHitTest, sal_uInt16 nModifier ); SVT_DLLPRIVATE void ImplDrag( const Point& rPos ); SVT_DLLPRIVATE void ImplEndDrag(); DECL_DLLPRIVATE_LINK( ImplUpdateHdl, void* ); #endif // Forbidden and not implemented. Ruler (const Ruler &); Ruler & operator= (const Ruler &); protected: long GetRulerVirHeight() const; public: Ruler( Window* pParent, WinBits nWinStyle = WB_STDRULER ); virtual ~Ruler(); virtual void MouseButtonDown( const MouseEvent& rMEvt ); virtual void MouseMove( const MouseEvent& rMEvt ); virtual void Tracking( const TrackingEvent& rTEvt ); virtual void Paint( const Rectangle& rRect ); virtual void Resize(); virtual void StateChanged( StateChangedType nStateChange ); virtual void DataChanged( const DataChangedEvent& rDCEvt ); virtual long StartDrag(); virtual void Drag(); virtual void EndDrag(); virtual void Click(); virtual void DoubleClick(); virtual void ExtraDown(); void Activate(); void Deactivate(); sal_Bool IsActive() const { return mbActive; } void SetWinPos( long nOff = 0, long nWidth = 0 ); long GetWinOffset() const { return mnWinOff; } long GetWinWidth() const { return mnWinWidth; } void SetPagePos( long nOff = 0, long nWidth = 0 ); long GetPageOffset() const; long GetPageWidth() const; void SetBorderPos( long nOff = 0 ); long GetBorderOffset() const { return mnBorderOff; } Rectangle GetExtraRect() const { return maExtraRect; } void SetUnit( FieldUnit eNewUnit ); FieldUnit GetUnit() const { return meUnit; } void SetZoom( const Fraction& rNewZoom ); Fraction GetZoom() const { return maZoom; } void SetSourceUnit( MapUnit eNewUnit ) { meSourceUnit = eNewUnit; } MapUnit GetSourceUnit() const { return meSourceUnit; } void SetExtraType( RulerExtra eNewExtraType, sal_uInt16 nStyle = 0 ); RulerExtra GetExtraType() const { return meExtraType; } sal_uInt16 GetExtraStyle() const { return mnExtraStyle; } sal_uInt16 GetExtraClicks() const { return mnExtraClicks; } sal_uInt16 GetExtraModifier() const { return mnExtraModifier; } sal_Bool StartDocDrag( const MouseEvent& rMEvt, RulerType eDragType = RULER_TYPE_DONTKNOW ); RulerType GetDragType() const { return meDragType; } long GetDragPos() const { return mnDragPos; } sal_uInt16 GetDragAryPos() const { return mnDragAryPos; } sal_uInt16 GetDragSize() const { return mnDragSize; } sal_Bool IsDragDelete() const { return mbDragDelete; } sal_Bool IsDragCanceled() const { return mbDragCanceled; } sal_uInt16 GetDragScroll() const { return mnDragScroll; } sal_uInt16 GetDragModifier() const { return mnDragModifier; } sal_Bool IsDrag() const { return mbDrag; } void CancelDrag(); long GetClickPos() const { return mnDragPos; } RulerType GetClickType() const { return meDragType; } sal_uInt16 GetClickAryPos() const { return mnDragAryPos; } using Window::GetType; RulerType GetType( const Point& rPos, sal_uInt16* pAryPos = NULL ) const; void SetNullOffset( long nPos ); long GetNullOffset() const; void SetMargin1() { SetMargin1( 0, RULER_STYLE_INVISIBLE ); } void SetMargin1( long nPos, sal_uInt16 nMarginStyle = RULER_MARGIN_SIZEABLE ); long GetMargin1() const; void SetMargin2() { SetMargin2( 0, RULER_STYLE_INVISIBLE ); } void SetMargin2( long nPos, sal_uInt16 nMarginStyle = RULER_MARGIN_SIZEABLE ); long GetMargin2() const; void SetLines( sal_uInt16 n = 0, const RulerLine* pLineAry = NULL ); void SetBorders( sal_uInt16 n = 0, const RulerBorder* pBrdAry = NULL ); void SetIndents( sal_uInt16 n = 0, const RulerIndent* pIndentAry = NULL ); void SetTabs( sal_uInt16 n = 0, const RulerTab* pTabAry = NULL ); sal_uInt16 GetTabCount() const; const RulerTab* GetTabs() const; static void DrawTab( OutputDevice* pDevice, const Point& rPos, sal_uInt16 nStyle ); void SetStyle( WinBits nStyle ); WinBits GetStyle() const { return mnWinStyle; } void SetStartDragHdl( const Link& rLink ) { maStartDragHdl = rLink; } const Link& GetStartDragHdl() const { return maStartDragHdl; } void SetDragHdl( const Link& rLink ) { maDragHdl = rLink; } const Link& GetDragHdl() const { return maDragHdl; } void SetEndDragHdl( const Link& rLink ) { maEndDragHdl = rLink; } const Link& GetEndDragHdl() const { return maEndDragHdl; } void SetClickHdl( const Link& rLink ) { maClickHdl = rLink; } const Link& GetClickHdl() const { return maClickHdl; } void SetDoubleClickHdl( const Link& rLink ) { maDoubleClickHdl = rLink; } const Link& GetDoubleClickHdl() const { return maDoubleClickHdl; } void SetExtraDownHdl( const Link& rLink ) { maExtraDownHdl = rLink; } const Link& GetExtraDownHdl() const { return maExtraDownHdl; } //set text direction right-to-left void SetTextRTL(sal_Bool bRTL); void SetCharWidth( long nWidth ) { mnCharWidth = nWidth ; } void SetLineHeight( long nHeight ) { mnLineHeight = nHeight ; } void DrawTicks(); }; #endif // _RULER_HXX /* vim:set shiftwidth=4 softtabstop=4 expandtab: */