# # This file is part of the LibreOffice project. # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. # # This file incorporates work covered by the following license notice: # # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed # with this work for additional information regarding copyright # ownership. The ASF licenses this file to you under the Apache # License, Version 2.0 (the "License"); you may not use this file # except in compliance with the License. You may obtain a copy of # the License at http://www.apache.org/licenses/LICENSE-2.0 . # package installer; use base 'Exporter'; use Cwd; use Data::Dumper; use File::Copy; use List::Util qw(shuffle); use installer::control; use installer::converter; use installer::copyproject; use installer::download; use installer::environment; use installer::epmfile; use installer::files; use installer::filelists; use installer::globals; use installer::helppack; use installer::languagepack; use installer::languages; use installer::logger; use installer::packagelist; use installer::parameter; use installer::pathanalyzer; use installer::profiles; use installer::scpzipfiles; use installer::scriptitems; use installer::setupscript; use installer::simplepackage; use installer::strip qw(strip_libraries); use installer::systemactions; use installer::windows::assembly; use installer::windows::binary; use installer::windows::component; use installer::windows::createfolder; use installer::windows::directory; use installer::windows::feature; use installer::windows::featurecomponent; use installer::windows::file; use installer::windows::font; use installer::windows::icon; use installer::windows::idtglobal; use installer::windows::inifile; use installer::windows::media; use installer::windows::mergemodule; use installer::windows::msiglobal; use installer::windows::msishortcutproperty; use installer::windows::msp; use installer::windows::property; use installer::windows::removefile; use installer::windows::registry; use installer::windows::shortcut; use installer::windows::strip; use installer::windows::update; use installer::windows::upgrade; use installer::worker; use installer::ziplist qw(read_ziplist); our @EXPORT_OK = qw(main); sub main { installer::logger::starttime(); my $exit_code = 0; eval { run(); }; if ($@) { my $message = "ERROR: $@"; warn "ERROR: Failure in installer.pm\n"; warn "$message\n"; $exit_code = -1; cleanup_on_error($message); } installer::logger::stoptime(); return $exit_code; } sub run { installer::logger::print_message( "... checking environment variables ...\n" ); my $environmentvariableshashref = installer::control::check_system_environment(); installer::environment::set_global_environment_variables($environmentvariableshashref); ################################# # Check and output of parameter ################################# installer::parameter::saveparameter(); installer::parameter::getparameter(); installer::parameter::control_fundamental_parameter(); installer::parameter::setglobalvariables(); installer::parameter::control_required_parameter(); if (!($installer::globals::languages_defined_in_productlist)) { installer::languages::analyze_languagelist(); } installer::parameter::outputparameter(); $installer::globals::build = uc($installer::globals::build); # using "SRC680" instead of "src680" ###################################### # Creating the log directory ###################################### my $empty = ""; my $loggingdir = installer::systemactions::create_directories("logging", \$empty); $loggingdir = $loggingdir . $installer::globals::separator; $installer::globals::exitlog = $loggingdir; my $installdir = ""; my $currentdir = cwd(); my $shipinstalldir = ""; my $current_install_number = ""; ###################################### # Checking the system requirements ###################################### installer::logger::print_message( "... checking required files ...\n" ); installer::control::check_system_path(); my $pathvariableshashref = installer::environment::create_pathvariables($environmentvariableshashref); ############################################### # Checking saved setting for Windows patches ############################################### if (( $installer::globals::iswindowsbuild ) && ( $installer::globals::prepare_winpatch )) { installer::windows::msiglobal::read_saved_mappings(); } ################################################### # Analyzing the settings and variables in zip.lst ################################################### my ($allsettingsarrayref, $allvariableshashref) = read_ziplist($installer::globals::ziplistname); ######################################################## # Check if this is simple packaging mechanism ######################################################## installer::simplepackage::check_simple_packager_project($allvariableshashref); #################################################################### # setting global variables #################################################################### installer::control::set_addsystemintegration($allvariableshashref); ######################################################## # Re-define logging dir, after all variables are set ######################################################## my $oldloggingdir = $loggingdir; # FIXME: It would be better to use installer::systemactions::remove_complete_directory # Though, we would need to remove only the lang-specific subdirectory for langpacks and helppacks rmdir $oldloggingdir; $loggingdir = installer::systemactions::create_directories("logging", \$empty); $loggingdir = $loggingdir . $installer::globals::separator; $installer::globals::exitlog = $loggingdir; # checking, whether this is an opensource product if (!($installer::globals::is_copy_only_project)) { installer::ziplist::set_manufacturer($allvariableshashref); } ############################################## # Checking version of makecab.exe ############################################## if ( $installer::globals::iswindowsbuild && (!defined($ENV{'CROSS_COMPILING'}) || $ENV{'CROSS_COMPILING'} ne 'TRUE' || $installer::globals::packageformat eq 'msi')) { installer::control::check_makecab_version(); } ########################################################## # Getting the include path from the settings in zip list ########################################################## my $includepathref = installer::ziplist::getinfofromziplist($allsettingsarrayref, "include"); if ( $$includepathref eq "" ) { die 'Definition for "include" not found in ' . $installer::globals::ziplistname; } my $includepatharrayref = installer::converter::convert_stringlist_into_array($includepathref, ","); installer::ziplist::replace_all_variables_in_paths($includepatharrayref, $pathvariableshashref); installer::ziplist::replace_minor_in_paths($includepatharrayref); installer::ziplist::replace_packagetype_in_paths($includepatharrayref); installer::ziplist::resolve_relative_paths($includepatharrayref); installer::ziplist::remove_ending_separator($includepatharrayref); ############################################## # Collecting all files from all include # paths in global hashes. ############################################## installer::worker::collect_all_files_from_includepaths($includepatharrayref); ############################################## # Analyzing languages in zip.lst if required # Probably no longer used. ############################################## if ($installer::globals::languages_defined_in_productlist) { installer::languages::get_info_about_languages($allsettingsarrayref); } ##################################### # Windows requires the LCID list ##################################### if ( $installer::globals::iswindowsbuild ) { installer::control::read_lcidlist($includepatharrayref); } #################################################################### # MacOS dmg build requires special DS_Store file to arrange icons #################################################################### # if (($installer::globals::ismacdmgbuild) && ($installer::globals::product eq "OpenOffice_Dev")) { $installer::globals::devsnapshotbuild = 1; } ##################################################################### # Including additional inc files for variable settings, if defined ##################################################################### if ( $allvariableshashref->{'ADD_INCLUDE_FILES'} ) { installer::worker::add_variables_from_inc_to_hashref($allvariableshashref, $includepatharrayref); } ##################################### # Analyzing the setup script ##################################### if ($installer::globals::setupscript_defined_in_productlist) { installer::setupscript::set_setupscript_name($allsettingsarrayref, $includepatharrayref); } installer::logger::globallog("setup script file: $installer::globals::setupscriptname"); installer::logger::print_message( "... analyzing script: $installer::globals::setupscriptname ... \n" ); my $setupscriptref = installer::files::read_file($installer::globals::setupscriptname); # Reading the setup script file # Resolving variables defined in the zip list file into setup script # All the variables are defined in $allvariablesarrayref installer::scpzipfiles::replace_all_ziplistvariables_in_file($setupscriptref, $allvariableshashref); # Resolving %variables defined in the installation object my $allscriptvariablesref = installer::setupscript::get_all_scriptvariables_from_installation_object($setupscriptref); installer::setupscript::add_lowercase_productname_setupscriptvariable($allscriptvariablesref); installer::setupscript::resolve_lowercase_productname_setupscriptvariable($allscriptvariablesref); $setupscriptref = installer::setupscript::replace_all_setupscriptvariables_in_script($setupscriptref, $allscriptvariablesref); # Adding all variables defined in the installation object into the hash of all variables. # This is needed if variables are defined in the installation object, but not in the zip list file. # If there is a definition in the zip list file and in the installation object, the installation object is more important installer::setupscript::add_installationobject_to_variables($allvariableshashref, $allscriptvariablesref); # Replacing preset properties, not using the default mechanisms (for example for UNIXPRODUCTNAME) installer::setupscript::replace_preset_properties($allvariableshashref); installer::scpzipfiles::replace_all_ziplistvariables_in_file($setupscriptref, $allvariableshashref); installer::logger::log_hashref($allvariableshashref); installer::logger::print_message( "... analyzing directories ... \n" ); # Collect all directories in the script to get the destination dirs my $dirsinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "Directory"); if ( $allvariableshashref->{'SHIFT_BASIS_INTO_BRAND_LAYER'} ) { $dirsinproductarrayref = installer::scriptitems::shift_basis_directory_parents($dirsinproductarrayref); } if ( $allvariableshashref->{'OFFICEDIRECTORYNAME'} ) { installer::scriptitems::set_officedirectory_name($dirsinproductarrayref, $allvariableshashref->{'OFFICEDIRECTORYNAME'}); } installer::scriptitems::resolve_all_directory_names($dirsinproductarrayref); installer::logger::print_message( "... analyzing files ... \n" ); my $filesinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "File"); if (( ! $installer::globals::iswindowsbuild ) && ( ! $installer::globals::isrpmbuild ) && ( ! $installer::globals::isdebbuild ) && ( ! $installer::globals::issolarispkgbuild ) && ( $installer::globals::packageformat ne "installed" ) && ( $installer::globals::packageformat ne "dmg" ) && ( $installer::globals::packageformat ne "archive" )) { installer::control::check_oxtfiles($filesinproductarrayref); } if (! $installer::globals::languagepack) { $filesinproductarrayref = installer::scriptitems::remove_Languagepacklibraries_from_Installset($filesinproductarrayref); } if (! $installer::globals::helppack) { $filesinproductarrayref = installer::scriptitems::remove_Helppacklibraries_from_Installset($filesinproductarrayref); } installer::logger::print_message( "... analyzing scpactions ... \n" ); my $scpactionsinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "ScpAction"); if ( $installer::globals::languagepack ) { installer::scriptitems::use_langpack_copy_scpaction($scpactionsinproductarrayref); } if ( $installer::globals::helppack ) { installer::scriptitems::use_langpack_copy_scpaction($scpactionsinproductarrayref); } # if (($installer::globals::devsnapshotbuild)) { installer::scriptitems::use_dev_copy_scpaction($scpactionsinproductarrayref); } # TODO: why is this not done in scp2 based on the value of $(ENABLE_RELEASE_BUILD)? if ( $allvariableshashref->{'PRODUCTNAME'} eq "LibreOfficeDev" ) { installer::scriptitems::use_devversion_copy_scpaction($scpactionsinproductarrayref); } installer::scriptitems::change_keys_of_scpactions($scpactionsinproductarrayref); installer::logger::print_message( "... analyzing shortcuts ... \n" ); my $linksinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "Shortcut"); installer::logger::print_message( "... analyzing unix links ... \n" ); my $unixlinksinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "Unixlink"); installer::logger::print_message( "... analyzing profile ... \n" ); my $profilesinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "Profile"); installer::logger::print_message( "... analyzing profileitems ... \n" ); my $profileitemsinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "ProfileItem"); my $folderinproductarrayref; my $folderitemsinproductarrayref; my $folderitempropertiesinproductarrayref; my $registryitemsinproductarrayref; my $windowscustomactionsarrayref; my $mergemodulesarrayref; if ( $installer::globals::iswindowsbuild ) # Windows specific items: Folder, FolderItem, RegistryItem, WindowsCustomAction { installer::logger::print_message( "... analyzing folders ... \n" ); $folderinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "Folder"); installer::logger::print_message( "... analyzing folderitems ... \n" ); $folderitemsinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "FolderItem"); installer::setupscript::add_predefined_folder($folderitemsinproductarrayref, $folderinproductarrayref); installer::logger::print_message( "... analyzing folderitemproperties ... \n" ); $folderitempropertiesinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "FolderItemProperty"); installer::setupscript::prepare_non_advertised_files($folderitemsinproductarrayref, $filesinproductarrayref); installer::logger::print_message( "... analyzing registryitems ... \n" ); $registryitemsinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "RegistryItem"); $registryitemsinproductarrayref = installer::scriptitems::remove_uninstall_regitems_from_script($registryitemsinproductarrayref); installer::logger::print_message( "... analyzing Windows custom actions ... \n" ); $windowscustomactionsarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "WindowsCustomAction"); installer::logger::print_message( "... analyzing Windows merge modules ... \n" ); $mergemodulesarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "MergeModule"); } my $modulesinproductarrayref; if (!($installer::globals::is_copy_only_project)) { installer::logger::print_message( "... analyzing modules ... \n" ); $modulesinproductarrayref = installer::setupscript::get_all_items_from_script($setupscriptref, "Module"); installer::scriptitems::resolve_assigned_modules($modulesinproductarrayref); $modulesinproductarrayref = installer::scriptitems::remove_template_modules($modulesinproductarrayref); installer::scriptitems::set_children_flag($modulesinproductarrayref); installer::scriptitems::collect_all_languagemodules($modulesinproductarrayref); # Assigning the modules to the items installer::scriptitems::assigning_modules_to_items($modulesinproductarrayref, $filesinproductarrayref, "Files"); installer::scriptitems::assigning_modules_to_items($modulesinproductarrayref, $unixlinksinproductarrayref, "Unixlinks"); installer::scriptitems::assigning_modules_to_items($modulesinproductarrayref, $dirsinproductarrayref, "Dirs"); } ################################################# # Part 1b: The language dependent part # (still platform independent) ################################################# # Now starts the language dependent part, if more than one product is defined on the command line # Example -l en-US,de#es,fr,it defines two multilingual products ############################################################################### # Beginning of language dependent part # The for iterates over all products, separated by an # in the language list ############################################################################### for ( my $n = 0; $n <= $#installer::globals::languageproducts; $n++ ) { my $languagesarrayref = installer::languages::get_all_languages_for_one_product($installer::globals::languageproducts[$n], $allvariableshashref); my @setuplanguagesarray = @{ $languagesarrayref }; my $languagestringref = installer::languages::get_language_string($languagesarrayref); installer::logger::print_message( "------------------------------------\n" ); installer::logger::print_message( "... languages $$languagestringref ... \n" ); if ( $installer::globals::languagepack ) { $installer::globals::addsystemintegration = 0; $installer::globals::addlicensefile = 0; $installer::globals::makedownload = 1; } if ( $installer::globals::helppack ) { $installer::globals::addsystemintegration = 0; $installer::globals::addlicensefile = 0; $installer::globals::makedownload = 1; @setuplanguagesarray = grep { $_ ne "en-US" } @setuplanguagesarray; unshift(@setuplanguagesarray, "en-US"); } ############################################################ # Beginning of language specific logging mechanism # Until now only global logging into default: logfile.txt ############################################################ @installer::globals::logfileinfo = (); # new logfile array and new logfile name installer::logger::copy_globalinfo_into_logfile(); my $loglanguagestring = $$languagestringref; my $loglanguagestring_orig = $loglanguagestring; if (length($loglanguagestring) > $installer::globals::max_lang_length) { my $number_of_languages = installer::systemactions::get_number_of_langs($loglanguagestring); #replace this in the same it was done in installer/windows/directory.pm #chomp(my $shorter = `echo $loglanguagestring | $ENV{'MD5SUM'} | sed -e "s/ .*//g"`); #my $id = substr($shorter, 0, 8); # taking only the first 8 digits my $id = installer::windows::msiglobal::calculate_id($loglanguagestring, 8); # taking only the first 8 digits $loglanguagestring = "lang_" . $number_of_languages . "_id_" . $id; } $installer::globals::logfilename = "log_" . $installer::globals::build; $installer::globals::logfilename .= "_" . $loglanguagestring; $installer::globals::logfilename .= ".log"; $loggingdir = $loggingdir . $loglanguagestring . $installer::globals::separator; installer::systemactions::create_directory($loggingdir); if ($loglanguagestring ne $loglanguagestring_orig) { (my $dir = $loggingdir) =~ s!/$!!; open(my $F1, "> $dir.dir"); open(my $F2, "> " . $loggingdir . $installer::globals::logfilename . '.file'); my @s = map { "$_\n" } split('_', $loglanguagestring_orig); print $F1 @s; print $F2 @s; } $installer::globals::exitlog = $loggingdir; ################################################################### # Reading an existing msi database, to prepare update and patch ################################################################### my $refdatabase = ""; my $uniquefilename = ""; my $revuniquefilename = ""; my $revshortfilename = ""; my $allupdatesequences = ""; my $allupdatecomponents = ""; my $allupdatefileorder = ""; my $allupdatecomponentorder = ""; my $shortdirname = ""; my $componentid = ""; my $componentidkeypath = ""; my $alloldproperties = ""; my $allupdatelastsequences = ""; my $allupdatediskids = ""; if ( $installer::globals::iswindowsbuild || $installer::globals::packageformat eq 'msi' ) { if ( $allvariableshashref->{'UPDATE_DATABASE'} ) { installer::logger::print_message( "... analyzing update database ...\n" ); $refdatabase = installer::windows::update::readdatabase($allvariableshashref, $languagestringref, $includepatharrayref); if ( $installer::globals::updatedatabase ) { ($uniquefilename, $revuniquefilename, $revshortfilename, $allupdatesequences, $allupdatecomponents, $allupdatefileorder, $allupdatecomponentorder, $shortdirname, $componentid, $componentidkeypath, $alloldproperties, $allupdatelastsequences, $allupdatediskids) = installer::windows::update::create_database_hashes($refdatabase); } } # Always analyze the merge module. # We need to investigate the directory table in merge module to emit # custom action for directory names that start with standard prefix if ( $mergemodulesarrayref > -1 ) { installer::windows::update::readmergedatabase($mergemodulesarrayref, $languagestringref, $includepatharrayref); } } ############################################## # Setting global code variables for Windows ############################################## if (!($installer::globals::is_copy_only_project)) { if ((( $installer::globals::iswindowsbuild ) && ( $installer::globals::packageformat ne "archive" ) && ( $installer::globals::packageformat ne "installed" ) ) || $installer::globals::packageformat eq 'msi' ) { installer::windows::msiglobal::set_global_code_variables($languagesarrayref, $languagestringref, $allvariableshashref, $alloldproperties); } } ################################################ # Resolving include paths (language dependent) ################################################ $includepatharrayref_lang = installer::ziplist::replace_languages_in_paths($includepatharrayref, \@setuplanguagesarray); if ( $installer::globals::refresh_includepaths ) { installer::worker::collect_all_files_from_includepaths($includepatharrayref_lang); } installer::ziplist::list_all_files_from_include_path($includepatharrayref_lang); ############################################## # Analyzing spellchecker languages ############################################## if ( $allvariableshashref->{'SPELLCHECKERFILE'} ) { installer::worker::set_spellcheckerlanguages($languagesarrayref, $allvariableshashref); } ##################################### # Language dependent directory part ##################################### my $dirsinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($dirsinproductarrayref, $languagesarrayref); # A new directory array is needed ($dirsinproductlanguageresolvedarrayref instead of $dirsinproductarrayref) # because $dirsinproductarrayref is needed in get_Destination_Directory_For_Item_From_Directorylist installer::scriptitems::changing_name_of_language_dependent_keys($dirsinproductlanguageresolvedarrayref); installer::scriptitems::checking_directories_with_corrupt_hostname($dirsinproductlanguageresolvedarrayref, $languagesarrayref); installer::scriptitems::set_global_directory_hostnames($dirsinproductlanguageresolvedarrayref, $allvariableshashref); ##################################### # files part, language dependent ##################################### installer::logger::print_message( "... analyzing files ...\n" ); my $filesinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($filesinproductarrayref, $languagesarrayref); if ( ! $installer::globals::set_office_start_language ) { $filesinproductlanguageresolvedarrayref = installer::scriptitems::remove_office_start_language_files($filesinproductlanguageresolvedarrayref); } installer::scriptitems::changing_name_of_language_dependent_keys($filesinproductlanguageresolvedarrayref); if ( $installer::globals::iswin and $^O =~ /MSWin/i ) { installer::converter::convert_slash_to_backslash($filesinproductlanguageresolvedarrayref); } $filesinproductlanguageresolvedarrayref = installer::scriptitems::remove_non_existent_languages_in_productlists($filesinproductlanguageresolvedarrayref, $languagestringref, "Name", "file"); installer::scriptitems::get_Destination_Directory_For_Item_From_Directorylist($filesinproductlanguageresolvedarrayref, $dirsinproductarrayref); installer::scriptitems::get_Source_Directory_For_Files_From_Includepathlist($filesinproductlanguageresolvedarrayref, $includepatharrayref_lang, $dirsinproductlanguageresolvedarrayref, "Files", $allvariableshashref); $filesinproductlanguageresolvedarrayref = installer::scriptitems::remove_Files_Without_Sourcedirectory($filesinproductlanguageresolvedarrayref); if ($installer::globals::languagepack) { $filesinproductlanguageresolvedarrayref = installer::scriptitems::remove_Files_For_Languagepacks($filesinproductlanguageresolvedarrayref); } if ( ! $allvariableshashref->{'NO_README_IN_ROOTDIR'} ) { $filesinproductlanguageresolvedarrayref = installer::scriptitems::add_License_Files_into_Installdir($filesinproductlanguageresolvedarrayref, $dirsinproductlanguageresolvedarrayref, $languagesarrayref); } installer::scriptitems::make_filename_language_specific($filesinproductlanguageresolvedarrayref); ###################################################################################### # Processing files with flag FILELIST and putting listed files into the file list ###################################################################################### installer::logger::print_message( "... analyzing files with flag FILELIST ...\n" ); ($filesinproductlanguageresolvedarrayref, $unixlinksinproductarrayref) = installer::filelists::resolve_filelist_flag($filesinproductlanguageresolvedarrayref, $unixlinksinproductarrayref, $ENV{'INSTDIR'}); # packed files sometimes contain a "$" in their name: HighlightText$1.class. For epm the "$" has to be quoted by "$$" if (!( $installer::globals::iswindowsbuild || $installer::globals::simple ) ) { installer::scriptitems::quoting_illegal_filenames($filesinproductlanguageresolvedarrayref); } ##################################### # Files with flag SCPZIP_REPLACE ##################################### installer::logger::print_message( "... analyzing files with flag SCPZIP_REPLACE ...\n" ); # Editing files with flag SCPZIP_REPLACE. installer::scpzipfiles::resolving_scpzip_replace_flag($filesinproductlanguageresolvedarrayref, $allvariableshashref, "File", $languagestringref); ######################################################### # language dependent unix links part ######################################################### installer::logger::print_message( "... analyzing unix links ...\n" ); my $unixlinksinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($unixlinksinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($unixlinksinproductlanguageresolvedarrayref); installer::scriptitems::get_Destination_Directory_For_Item_From_Directorylist($unixlinksinproductlanguageresolvedarrayref, $dirsinproductarrayref); ############################################ # Collecting directories for epm list file ############################################ installer::logger::print_message( "... analyzing all directories for this product ...\n" ); # There are two ways for a directory to be included into the epm directory list: # 1. Looking for all destination paths in the files array # 2. Looking for directories with CREATE flag in the directory array # Advantage: Many paths are hidden in zip files, they are not defined in the setup script. # It will be possible, that in the setup script only those directories have to be defined, # that have a CREATE flag. All other directories are created, if they contain at least one file. my ($directoriesforepmarrayref, $alldirectoryhash) = installer::scriptitems::collect_directories_from_filesarray($filesinproductlanguageresolvedarrayref, $unixlinksinproductlanguageresolvedarrayref); ($directoriesforepmarrayref, $alldirectoryhash) = installer::scriptitems::collect_directories_with_create_flag_from_directoryarray($dirsinproductlanguageresolvedarrayref, $alldirectoryhash); ######################################################### # language dependent scpactions part ######################################################### my $scpactionsinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($scpactionsinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($scpactionsinproductlanguageresolvedarrayref); installer::scriptitems::get_Source_Directory_For_Files_From_Includepathlist($scpactionsinproductlanguageresolvedarrayref, $includepatharrayref_lang, $dirsinproductlanguageresolvedarrayref, "ScpActions", $allvariableshashref); # Editing scpactions with flag SCPZIP_REPLACE. installer::scpzipfiles::resolving_scpzip_replace_flag($scpactionsinproductlanguageresolvedarrayref, $allvariableshashref, "ScpAction", $languagestringref); ######################################################### # language dependent links part ######################################################### installer::logger::print_message( "... analyzing links ...\n" ); my $linksinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($linksinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($linksinproductlanguageresolvedarrayref); installer::scriptitems::get_destination_file_path_for_links($linksinproductlanguageresolvedarrayref, $filesinproductlanguageresolvedarrayref); installer::scriptitems::get_Destination_Directory_For_Item_From_Directorylist($linksinproductlanguageresolvedarrayref, $dirsinproductarrayref); # Now taking all links that have no FileID but a ShortcutID, linking to another link installer::scriptitems::get_destination_link_path_for_links($linksinproductlanguageresolvedarrayref); $linksinproductlanguageresolvedarrayref = installer::scriptitems::remove_workstation_only_items($linksinproductlanguageresolvedarrayref); installer::scriptitems::resolve_links_with_flag_relative($linksinproductlanguageresolvedarrayref); ######################################################### # language dependent part for profiles and profileitems ######################################################### my $profilesinproductlanguageresolvedarrayref; my $profileitemsinproductlanguageresolvedarrayref; if ((!($installer::globals::is_copy_only_project)) && (!($installer::globals::languagepack)) && (!($installer::globals::helppack))) { installer::logger::print_message( "... creating profiles ...\n" ); $profilesinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($profilesinproductarrayref, $languagesarrayref); $profileitemsinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($profileitemsinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($profilesinproductlanguageresolvedarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($profileitemsinproductlanguageresolvedarrayref); installer::scriptitems::replace_setup_variables($profileitemsinproductlanguageresolvedarrayref, $languagestringref, $allvariableshashref); # Note that patch_user_dir is not related to the killed # ancient (not MSP) "patch" thing, I think. if ( $installer::globals::patch_user_dir ) { installer::scriptitems::replace_userdir_variable($profileitemsinproductlanguageresolvedarrayref); } installer::scriptitems::get_Destination_Directory_For_Item_From_Directorylist($profilesinproductlanguageresolvedarrayref, $dirsinproductarrayref); # Now the Profiles can be created installer::profiles::create_profiles($profilesinproductlanguageresolvedarrayref, $profileitemsinproductlanguageresolvedarrayref, $filesinproductlanguageresolvedarrayref, $languagestringref, $allvariableshashref); } my $registryitemsinproductlanguageresolvedarrayref; # cannot be defined in the following "if ( $installer::globals::iswindowsbuild )" my $folderinproductlanguageresolvedarrayref; # cannot be defined in the following "if ( $installer::globals::iswindowsbuild )" my $folderitemsinproductlanguageresolvedarrayref; # cannot be defined in the following "if ( $installer::globals::iswindowsbuild )" if ( $installer::globals::iswindowsbuild ) # Windows specific items: Folder, FolderItem, RegistryItem { ######################################################### # language dependent part for folder ######################################################### installer::logger::print_message( "... analyzing folder ...\n" ); $folderinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($folderinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($folderinproductlanguageresolvedarrayref); ######################################################### # language dependent part for folderitems ######################################################### installer::logger::print_message( "... analyzing folderitems ...\n" ); $folderitemsinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($folderitemsinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($folderitemsinproductlanguageresolvedarrayref); ######################################################### # language dependent part for registryitems ######################################################### installer::logger::print_message( "... analyzing registryitems ...\n" ); $registryitemsinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($registryitemsinproductarrayref, $languagesarrayref); installer::scriptitems::changing_name_of_language_dependent_keys($registryitemsinproductlanguageresolvedarrayref); } ######################################################### # language dependent part for modules ######################################################### my $modulesinproductlanguageresolvedarrayref; if (!($installer::globals::is_copy_only_project)) { installer::logger::print_message( "... analyzing modules ...\n" ); $modulesinproductlanguageresolvedarrayref = installer::scriptitems::resolving_all_languages_in_productlists($modulesinproductarrayref, $languagesarrayref); $modulesinproductlanguageresolvedarrayref = installer::scriptitems::remove_not_required_language_modules($modulesinproductlanguageresolvedarrayref, $languagesarrayref); if ( $installer::globals::analyze_spellcheckerlanguage ) { $modulesinproductlanguageresolvedarrayref = installer::scriptitems::remove_not_required_spellcheckerlanguage_modules($modulesinproductlanguageresolvedarrayref); $filesinproductlanguageresolvedarrayref = installer::scriptitems::remove_not_required_spellcheckerlanguage_files($filesinproductlanguageresolvedarrayref); $directoriesforepmarrayref = installer::scriptitems::remove_not_required_spellcheckerlanguage_files($directoriesforepmarrayref); } installer::scriptitems::changing_name_of_language_dependent_keys($modulesinproductlanguageresolvedarrayref); installer::scriptitems::select_required_language_strings($modulesinproductlanguageresolvedarrayref); # using english strings } # Copy-only projects can now start to copy all items File and ScpAction if ( $installer::globals::is_copy_only_project ) { installer::copyproject::copy_project($filesinproductlanguageresolvedarrayref, $scpactionsinproductlanguageresolvedarrayref, $loggingdir, $languagestringref, $shipinstalldir, $allsettingsarrayref); } # Language pack projects can now start to select the required information if ( $installer::globals::languagepack ) { $filesinproductlanguageresolvedarrayref = installer::languagepack::select_language_items($filesinproductlanguageresolvedarrayref, $languagesarrayref, "File"); $scpactionsinproductlanguageresolvedarrayref = installer::languagepack::select_language_items($scpactionsinproductlanguageresolvedarrayref, $languagesarrayref, "ScpAction"); $linksinproductlanguageresolvedarrayref = installer::languagepack::select_language_items($linksinproductlanguageresolvedarrayref, $languagesarrayref, "Shortcut"); $unixlinksinproductlanguageresolvedarrayref = installer::languagepack::select_language_items($unixlinksinproductlanguageresolvedarrayref, $languagesarrayref, "Unixlink"); @{$folderitemsinproductlanguageresolvedarrayref} = (); # no folderitems in languagepacks # Collecting the directories again, to include only the language specific directories ($directoriesforepmarrayref, $alldirectoryhash) = installer::scriptitems::collect_directories_from_filesarray($filesinproductlanguageresolvedarrayref, $unixlinksinproductlanguageresolvedarrayref); ($directoriesforepmarrayref, $alldirectoryhash) = installer::scriptitems::collect_directories_with_create_flag_from_directoryarray($dirsinproductlanguageresolvedarrayref, $alldirectoryhash); @$directoriesforepmarrayref = sort { $a->{"HostName"} cmp $b->{"HostName"} } @$directoriesforepmarrayref; if ( $installer::globals::iswindowsbuild ) { $registryitemsinproductlanguageresolvedarrayref = installer::worker::select_langpack_items($registryitemsinproductlanguageresolvedarrayref, "RegistryItem"); } } # Help pack projects can now start to select the required information if ( $installer::globals::helppack ) { $filesinproductlanguageresolvedarrayref = installer::helppack::select_help_items($filesinproductlanguageresolvedarrayref, $languagesarrayref, "File"); $scpactionsinproductlanguageresolvedarrayref = installer::helppack::select_help_items($scpactionsinproductlanguageresolvedarrayref, $languagesarrayref, "ScpAction"); $linksinproductlanguageresolvedarrayref = installer::helppack::select_help_items($linksinproductlanguageresolvedarrayref, $languagesarrayref, "Shortcut"); $unixlinksinproductlanguageresolvedarrayref = installer::helppack::select_help_items($unixlinksinproductlanguageresolvedarrayref, $languagesarrayref, "Unixlink"); @{$folderitemsinproductlanguageresolvedarrayref} = (); # no folderitems in helppacks # Collecting the directories again, to include only the language specific directories ($directoriesforepmarrayref, $alldirectoryhash) = installer::scriptitems::collect_directories_from_filesarray($filesinproductlanguageresolvedarrayref, $unixlinksinproductlanguageresolvedarrayref); ($directoriesforepmarrayref, $alldirectoryhash) = installer::scriptitems::collect_directories_with_create_flag_from_directoryarray($dirsinproductlanguageresolvedarrayref, $alldirectoryhash); @$directoriesforepmarrayref = sort { $a->{"HostName"} cmp $b->{"HostName"} } @$directoriesforepmarrayref; if ( $installer::globals::iswindowsbuild ) { $registryitemsinproductlanguageresolvedarrayref = installer::worker::select_helppack_items($registryitemsinproductlanguageresolvedarrayref, "RegistryItem"); } } ######################################################### # Collecting all scp actions ######################################################### installer::worker::collect_scpactions($scpactionsinproductlanguageresolvedarrayref); ########################################################### # Simple package projects can now start to create the # installation structure by creating Directories, Files # Links and ScpActions. This is the last platform # independent part. ########################################################### if ( $installer::globals::is_simple_packager_project ) { installer::simplepackage::create_simple_package($filesinproductlanguageresolvedarrayref, $directoriesforepmarrayref, $scpactionsinproductlanguageresolvedarrayref, $linksinproductlanguageresolvedarrayref, $unixlinksinproductlanguageresolvedarrayref, $loggingdir, $languagestringref, $shipinstalldir, $allsettingsarrayref, $allvariableshashref, $includepatharrayref); next; # ! leaving the current loop, because no further packaging required. } ########################################################### # Analyzing the package structure ########################################################### installer::logger::print_message( "... analyzing package list ...\n" ); my $packages = installer::packagelist::collectpackages($modulesinproductlanguageresolvedarrayref, $languagesarrayref); installer::packagelist::check_packagelist($packages); $packages = installer::packagelist::analyze_list($packages, $modulesinproductlanguageresolvedarrayref); installer::packagelist::remove_multiple_modules_packages($packages); # printing packages content: installer::packagelist::log_packages_content($packages); installer::packagelist::create_module_destination_hash($packages, $allvariableshashref); ################################################# # Part 2: The platform dependent part ################################################# ################################################# # Part 2a: All non-Windows platforms ################################################# ######################################################### # ... creating epm list file ... # Only for non-Windows platforms ######################################################### if (!( $installer::globals::iswindowsbuild )) { #################################################### # Writing log file before packages are packed #################################################### installer::logger::print_message( "... creating log file " . $loggingdir . $installer::globals::logfilename . "\n" ); installer::files::save_file($loggingdir . $installer::globals::logfilename, \@installer::globals::logfileinfo); #################################################### # Creating directories #################################################### if ( $allvariableshashref->{'OOODOWNLOADNAME'} ) { installer::download::set_download_filename($languagestringref, $allvariableshashref); } else { installer::download::resolve_variables_in_downloadname($allvariableshashref, "", $languagestringref); } $installdir = installer::worker::create_installation_directory($shipinstalldir, $languagestringref, \$current_install_number); my $listfiledir = installer::systemactions::create_directories("listfile", $languagestringref); my $installlogdir = installer::systemactions::create_directory_next_to_directory($installdir, "log"); #################################################### # Reading for Solaris all package descriptions # from file defined in property PACKAGEMAP #################################################### if ( $installer::globals::issolarisbuild ) { installer::epmfile::read_packagemap($allvariableshashref, $includepatharrayref, $languagesarrayref); } ########################################### # Checking epm state ########################################### my $epmexecutable = ""; if ( $installer::globals::call_epm ) { $epmexecutable = installer::epmfile::find_epm_on_system($includepatharrayref); installer::epmfile::set_patch_state($epmexecutable); # setting $installer::globals::is_special_epm } # shuffle array to reduce parallel packaging process in pool @{$packages} = shuffle @{$packages} unless $installer::globals::simple; # iterating over all packages for my $onepackage ( @{$packages} ) { # checking, if this is a language pack or a project pack. # Creating language packs only, if $installer::globals::languagepack is set. Parameter: -languagepack if ( $installer::globals::languagepack ) { installer::languagepack::replace_languagestring_variable($onepackage, $languagestringref); } # checking, if this is a help pack # Creating help packs only, if $installer::globals::helppack is set. Parameter: -helppack if ( $installer::globals::helppack ) { installer::helppack::replace_languagestring_variable($onepackage, $languagestringref); } my $onepackagename = $onepackage->{'module'}; # name of the top module (required) my $shellscriptsfilename = ""; if ( $onepackage->{'script'} ) { $shellscriptsfilename = $onepackage->{'script'}; } ########################### # package name ########################### my $packagename = ""; if ( $installer::globals::issolarisbuild ) # only for Solaris { if ( $onepackage->{'solarispackagename'} ) { $packagename = $onepackage->{'solarispackagename'}; } } else # not Solaris { if ( $onepackage->{'packagename'} ) { $packagename = $onepackage->{'packagename'}; } } if (!($packagename eq "")) { installer::packagelist::resolve_packagevariables(\$packagename, $allvariableshashref, 0); } # Debian allows no underline in package name if ( $installer::globals::debian ) { $packagename =~ s/_/-/g; } #################################################### # Header for this package into log file #################################################### installer::logger::include_header_into_logfile("Creating package: $packagename"); ########################################### # Root path, can be defined as parameter ########################################### my $packagerootpath = ""; if ($installer::globals::rootpath eq "") { $packagerootpath = $onepackage->{'destpath'}; installer::packagelist::resolve_packagevariables(\$packagerootpath, $allvariableshashref, 1); # we put branding and common stuff into the same prefix on unixes => $packagerootpath must be the whole prefix, including the product name if ($installer::globals::isunix) { $packagerootpath .= "/$allvariableshashref->{'UNIXBASISROOTNAME'}"; } if ( $^O =~ /darwin/i ) { $packagerootpath =~ s/\/opt\//\/Applications\//; } } else { $packagerootpath = $installer::globals::rootpath; } ################################# # collecting items for package ################################# my $filesinpackage = installer::packagelist::find_files_for_package($filesinproductlanguageresolvedarrayref, $onepackage); my $unixlinksinpackage = installer::packagelist::find_files_for_package($unixlinksinproductlanguageresolvedarrayref, $onepackage); my $linksinpackage = installer::packagelist::find_links_for_package($linksinproductlanguageresolvedarrayref, $onepackage); my $dirsinpackage = installer::packagelist::find_dirs_for_package($directoriesforepmarrayref, $onepackage); ############################################# # copying the collectors for each package ############################################# $filesinpackage = installer::converter::copy_collector($filesinpackage); $linksinpackage = installer::converter::copy_collector($linksinpackage); $unixlinksinpackage = installer::converter::copy_collector($unixlinksinpackage); $dirsinpackage = installer::converter::copy_collector($dirsinpackage); ########################################### # setting the root path for the packages ########################################### installer::scriptitems::add_rootpath_to_directories($dirsinpackage, $packagerootpath); installer::scriptitems::add_rootpath_to_files($filesinpackage, $packagerootpath); installer::scriptitems::add_rootpath_to_links($linksinpackage, $packagerootpath); installer::scriptitems::add_rootpath_to_files($unixlinksinpackage, $packagerootpath); ############################################### # nothing to do, if $filesinpackage is empty ############################################### if ( ! ( $#{$filesinpackage} > -1 )) { $infoline = "\n\nNo file in package: $packagename \-\> Skipping\n\n"; push(@installer::globals::logfileinfo, $infoline); next; # next package, end of loop ! } ########################################### # Stripping libraries ########################################### # Building for non Windows platforms in cws requires, that all files are stripped before packaging: # 1. copy all files that need to be stripped locally # 2. strip all these files if ( $installer::globals::strip ) { strip_libraries($filesinpackage, $languagestringref); } if ( $installer::globals::simple ) { installer::worker::install_simple($onepackagename, $$languagestringref, $dirsinpackage, $filesinpackage, $linksinpackage, $unixlinksinpackage); } else { # epm list file format: # type mode owner group destination source options # Example for a file: f 755 root sys /usr/bin/foo foo # Example for a directory: d 755 root sys /var/spool/foo - # Example for a link: l 000 root sys /usr/bin/linkname filename # The source field specifies the file to link to my $epmfilename = "epm_" . $onepackagename . ".lst"; installer::logger::print_message( "... creating epm list file $epmfilename ... \n" ); my $completeepmfilename = $listfiledir . $installer::globals::separator . $epmfilename; my @epmfile = (); my $epmheaderref = installer::epmfile::create_epm_header($allvariableshashref, $filesinproductlanguageresolvedarrayref, $languagesarrayref, $onepackage); installer::epmfile::adding_header_to_epm_file(\@epmfile, $epmheaderref); # adding directories, files and links into epm file installer::epmfile::put_directories_into_epmfile($dirsinpackage, \@epmfile, $allvariableshashref, $packagerootpath); installer::epmfile::put_files_into_epmfile($filesinpackage, \@epmfile ); installer::epmfile::put_links_into_epmfile($linksinpackage, \@epmfile ); installer::epmfile::put_unixlinks_into_epmfile($unixlinksinpackage, \@epmfile ); if ((!( $shellscriptsfilename eq "" )) && (!($installer::globals::iswindowsbuild))) { installer::epmfile::adding_shellscripts_to_epm_file(\@epmfile, $shellscriptsfilename, $packagerootpath, $allvariableshashref, $filesinpackage); } installer::files::save_file($completeepmfilename ,\@epmfile); # ... splitting the rootpath into a relocatable part and a static part, if possible my $staticpath = ""; my $relocatablepath = ""; # relocatable path can be defined in package list if ( $onepackage->{'relocatablepath'} ) { $relocatablepath = $onepackage->{'relocatablepath'}; } # setting fix part and variable part of destination path installer::epmfile::analyze_rootpath($packagerootpath, \$staticpath, \$relocatablepath, $allvariableshashref); # ... replacing the variable PRODUCTDIRECTORYNAME in the shellscriptfile by $staticpath installer::epmfile::resolve_path_in_epm_list_before_packaging(\@epmfile, $completeepmfilename, "PRODUCTDIRECTORYNAME", $staticpath); installer::epmfile::resolve_path_in_epm_list_before_packaging(\@epmfile, $completeepmfilename, "SOLSUREPACKAGEPREFIX", $allvariableshashref->{'SOLSUREPACKAGEPREFIX'}); installer::epmfile::resolve_path_in_epm_list_before_packaging(\@epmfile, $completeepmfilename, "UREPACKAGEPREFIX", $allvariableshashref->{'UREPACKAGEPREFIX'}); installer::files::save_file($completeepmfilename ,\@epmfile); { # changing into the "install" directory to create installation sets $currentdir = cwd(); # $currentdir is global in this file chdir($installdir); # changing into install directory ($installdir is global in this file) ########################################### # Starting epm ########################################### # With a patched epm, it is now possible to set the relocatable directory, change # the directory in which the packages are created, setting "requires" and "provides" # (Linux) or creating the "depend" file (Solaris) and finally to begin # the packaging process with standard tooling and standard parameter # Linux: Adding into the spec file: Prefix: /opt # Solaris: Adding into the pkginfo file: BASEDIR=/opt # Attention: Changing of the path can influence the shell scripts if (( $installer::globals::is_special_epm ) && ( ($installer::globals::isrpmbuild) || ($installer::globals::issolarispkgbuild) )) # special handling only for Linux RPMs and Solaris Packages { if ( $installer::globals::call_epm ) # only do something, if epm is really executed { # ... now epm can be started, to create the installation sets installer::logger::print_message( "... starting patched epm ... \n" ); installer::epmfile::call_epm($epmexecutable, $completeepmfilename, $packagename, $includepatharrayref); my $newepmdir = installer::epmfile::prepare_packages($loggingdir, $packagename, $staticpath, $relocatablepath, $onepackage, $allvariableshashref, $filesinpackage, $languagestringref); # adding the line for Prefix / Basedir, include rpmdir installer::epmfile::create_packages_without_epm($newepmdir, $packagename, $includepatharrayref, $allvariableshashref, $languagestringref); # start to package # finally removing all temporary files installer::epmfile::remove_temporary_epm_files($newepmdir, $loggingdir, $packagename); # Installation: # Install: pkgadd -a myAdminfile -d ./SUNWso8m34.pkg # Install: rpm -i --prefix=/opt/special --nodeps so8m35.rpm installer::epmfile::create_new_directory_structure($newepmdir); $installer::globals::postprocess_specialepm = 1; # solaris patch not needed anymore } } else # this is the standard epm (not relocatable) or ( nonlinux and nonsolaris ) { installer::epmfile::resolve_path_in_epm_list_before_packaging(\@epmfile, $completeepmfilename, "\$\$PRODUCTINSTALLLOCATION", $relocatablepath); installer::files::save_file($completeepmfilename ,\@epmfile); # Warning for pool, content of epm file is changed. if ( $installer::globals::call_epm ) { # ... now epm can be started, to create the installation sets installer::logger::print_message( "... starting unpatched epm ... \n" ); if ( $installer::globals::call_epm ) { installer::epmfile::call_epm($epmexecutable, $completeepmfilename, $packagename, $includepatharrayref); } if (($installer::globals::isrpmbuild) || ($installer::globals::issolarispkgbuild) || ($installer::globals::debian)) { $installer::globals::postprocess_standardepm = 1; } } } chdir($currentdir); # changing back into start directory } } # end of "if ( ! $installer::globals::simple ) } # end of "for ( @{$packages} )" ############################################################## # Post epm functionality, after the last package is packed ############################################################## if ( $installer::globals::postprocess_specialepm ) { installer::logger::include_header_into_logfile("Post EPM processes (Patched EPM):"); chdir($installdir); # Copying the cde, kde and gnome packages into the installation set if ( $installer::globals::addsystemintegration ) { installer::epmfile::put_systemintegration_into_installset($installer::globals::epmoutpath, $includepatharrayref, $allvariableshashref, $modulesinproductarrayref); } # Adding license and readme into installation set if ($installer::globals::addlicensefile) { installer::worker::put_scpactions_into_installset("."); } # Adding license file into setup if ( $allvariableshashref->{'PUT_LICENSE_INTO_SETUP'} ) { installer::worker::put_license_into_setup(".", $includepatharrayref); } # Creating installation set for Unix language packs, that are not part of multi lingual installation sets if ( ( $installer::globals::languagepack ) && ( ! $installer::globals::debian ) && ( ! $installer::globals::makedownload ) ) { installer::languagepack::build_installer_for_languagepack($installer::globals::epmoutpath, $allvariableshashref, $includepatharrayref, $languagesarrayref, $languagestringref); } # Creating installation set for Unix help packs, that are not part of multi lingual installation sets if ( ( $installer::globals::helppack ) && ( ! $installer::globals::debian ) && ( ! $installer::globals::makedownload ) ) { installer::helppack::build_installer_for_helppack($installer::globals::epmoutpath, $allvariableshashref, $includepatharrayref, $languagesarrayref, $languagestringref); } chdir($currentdir); # changing back into start directory } if ( $installer::globals::postprocess_standardepm ) { installer::logger::include_header_into_logfile("Post EPM processes (Standard EPM):"); chdir($installdir); # determine the destination directory my $newepmdir = installer::epmfile::determine_installdir_ooo(); # Copying the cde, kde and gnome packages into the installation set if ( $installer::globals::addsystemintegration ) { installer::epmfile::put_systemintegration_into_installset($newepmdir, $includepatharrayref, $allvariableshashref, $modulesinproductarrayref); } # Adding license and readme into installation set if ($installer::globals::addlicensefile) { installer::worker::put_scpactions_into_installset("."); } # Adding license file into setup if ( $allvariableshashref->{'PUT_LICENSE_INTO_SETUP'} ) { installer::worker::put_license_into_setup(".", $includepatharrayref); } # Creating installation set for Unix language packs, that are not part of multi lingual installation sets if ( ( $installer::globals::languagepack ) && ( ! $installer::globals::debian ) && ( ! $installer::globals::makedownload ) ) { installer::languagepack::build_installer_for_languagepack($newepmdir, $allvariableshashref, $includepatharrayref, $languagesarrayref, $languagestringref); } # Creating installation set for Unix help packs, that are not part of multi lingual installation sets if ( ( $installer::globals::helppack ) && ( ! $installer::globals::debian ) && ( ! $installer::globals::makedownload ) ) { installer::helppack::build_installer_for_helpepack($newepmdir, $allvariableshashref, $includepatharrayref, $languagesarrayref, $languagestringref); } chdir($currentdir); # changing back into start directory } if (( $installer::globals::issolarispkgbuild ) && ( $allvariableshashref->{'COLLECT_PKGMAP'} )) { installer::worker::collectpackagemaps($installdir, $languagestringref, $allvariableshashref); } ####################################################### # Analyzing the log file ####################################################### my $is_success = 0; my $finalinstalldir = ""; installer::worker::clean_output_tree(); # removing directories created in the output tree ($is_success, $finalinstalldir) = installer::worker::analyze_and_save_logfile($loggingdir, $installdir, $installlogdir, $allsettingsarrayref, $languagestringref, $current_install_number); my $downloadname = installer::ziplist::getinfofromziplist($allsettingsarrayref, "downloadname"); ####################################################### # Creating download installation set ####################################################### if ( $installer::globals::makedownload ) { my $create_download = 0; if ( $$downloadname ne "" ) { $create_download = 1; } if ( $installer::globals::iswindowsbuild ) { $create_download = 0; } if (( $is_success ) && ( $create_download ) && ( $ENV{'ENABLE_DOWNLOADSETS'} )) { my $downloaddir = installer::download::create_download_sets($finalinstalldir, $includepatharrayref, $allvariableshashref, $$downloadname, $languagestringref, $languagesarrayref); installer::worker::analyze_and_save_logfile($loggingdir, $downloaddir, $installlogdir, $allsettingsarrayref, $languagestringref, $current_install_number); } } } # end of "if (!( $installer::globals::iswindowsbuild ))" ################################################# # Part 2b: The Windows platform ################################################# ##################################################################### # ... creating idt files ... # Only for Windows builds ##################################################################### if ( $installer::globals::iswindowsbuild ) { ########################################### # Stripping libraries ########################################### # Building for gcc build in cws requires, that all files are stripped before packaging: # 1. copy all files that need to be stripped locally # 2. strip all these files if ( $installer::globals::com eq 'GCC') { installer::windows::strip::strip_binaries($filesinproductlanguageresolvedarrayref, $languagestringref); } $installdir = installer::worker::create_installation_directory($shipinstalldir, $languagestringref, \$current_install_number); my $idtdirbase = installer::systemactions::create_directories("idt_files", $languagestringref); $installer::globals::infodirectory = installer::systemactions::create_directories("info_files", $languagestringref); my $installlogdir = installer::systemactions::create_directory_next_to_directory($installdir, "log"); ################################################################################# # Preparing cabinet files from package definitions ################################################################################# installer::packagelist::prepare_cabinet_files($packages, $allvariableshashref); # printing packages content: installer::packagelist::log_cabinet_assignments(); ################################################################################# # Begin of functions that are used for the creation of idt files (Windows only) ################################################################################# installer::logger::print_message( "... creating idt files ...\n" ); installer::logger::include_header_into_logfile("Creating idt files:"); my $newidtdir = $idtdirbase . $installer::globals::separator . "00"; # new files into language independent directory "00" installer::systemactions::create_directory($newidtdir); my @allfilecomponents = (); my @allregistrycomponents = (); # Collecting all files with flag "BINARYTABLE" my $binarytablefiles = installer::worker::collect_all_items_with_special_flag($filesinproductlanguageresolvedarrayref ,"BINARYTABLE"); # Removing all files with flag "BINARYTABLE_ONLY" @installer::globals::binarytableonlyfiles = (); $filesinproductlanguageresolvedarrayref = installer::worker::remove_all_items_with_special_flag($filesinproductlanguageresolvedarrayref ,"BINARYTABLE_ONLY"); # Collecting all profileitems with flag "INIFILETABLE" for table "IniFile" my $inifiletableentries = installer::worker::collect_all_items_with_special_flag($profileitemsinproductlanguageresolvedarrayref ,"INIFILETABLE"); # Creating the important dynamic idt files installer::windows::msiglobal::set_msiproductversion($allvariableshashref); installer::windows::msiglobal::put_msiproductversion_into_bootstrapfile($filesinproductlanguageresolvedarrayref); # Add cabinet assignments to files installer::windows::file::assign_cab_to_files($filesinproductlanguageresolvedarrayref); installer::windows::file::assign_sequencenumbers_to_files($filesinproductlanguageresolvedarrayref); # Collection all available directory trees installer::windows::directory::collectdirectorytrees($directoriesforepmarrayref); # Attention: The table "Director.idt" contains language specific strings -> parameter: \@setuplanguagesarray ! installer::windows::directory::create_directory_table($directoriesforepmarrayref, \@setuplanguagesarray, $newidtdir, $allvariableshashref, $shortdirname, $loggingdir); $filesinproductlanguageresolvedarrayref = installer::windows::file::create_files_table($filesinproductlanguageresolvedarrayref, $directoriesforepmarrayref, \@allfilecomponents, $newidtdir, $allvariableshashref, $uniquefilename, $allupdatesequences, $allupdatecomponents, $allupdatefileorder); if ( $installer::globals::updatedatabase ) { installer::windows::file::check_file_sequences($allupdatefileorder, $allupdatecomponentorder); } # Attention: The table "Registry.idt" contains language specific strings -> parameter: \@setuplanguagesarray ! installer::windows::registry::create_registry_table($registryitemsinproductlanguageresolvedarrayref, \@allregistrycomponents, $newidtdir, \@setuplanguagesarray, $allvariableshashref); installer::windows::component::create_component_table($filesinproductlanguageresolvedarrayref, $registryitemsinproductlanguageresolvedarrayref, $directoriesforepmarrayref, \@allfilecomponents, \@allregistrycomponents, $newidtdir, $componentid, $componentidkeypath, $allvariableshashref); # Attention: The table "Feature.idt" contains language specific strings -> parameter: \@setuplanguagesarray ! installer::windows::feature::add_uniquekey($modulesinproductlanguageresolvedarrayref); $modulesinproductlanguageresolvedarrayref = installer::windows::feature::sort_feature($modulesinproductlanguageresolvedarrayref); installer::windows::feature::create_feature_table($modulesinproductlanguageresolvedarrayref, $newidtdir, \@setuplanguagesarray, $allvariableshashref); installer::windows::featurecomponent::create_featurecomponent_table($filesinproductlanguageresolvedarrayref, $registryitemsinproductlanguageresolvedarrayref, $newidtdir); installer::windows::media::create_media_table($filesinproductlanguageresolvedarrayref, $newidtdir, $allvariableshashref, $allupdatelastsequences, $allupdatediskids); installer::windows::font::create_font_table($filesinproductlanguageresolvedarrayref, $newidtdir); # Attention: The table "Shortcut.idt" contains language specific strings -> parameter: \@setuplanguagesarray ! # Attention: Shortcuts (Folderitems) have icon files, that have to be copied into the Icon directory (last parameter) my @iconfilecollector = (); installer::windows::shortcut::create_shortcut_table($filesinproductlanguageresolvedarrayref, $linksinproductlanguageresolvedarrayref, $folderinproductlanguageresolvedarrayref, $folderitemsinproductlanguageresolvedarrayref, $directoriesforepmarrayref, $newidtdir, \@setuplanguagesarray, $includepatharrayref, \@iconfilecollector); installer::windows::inifile::create_inifile_table($inifiletableentries, $filesinproductlanguageresolvedarrayref, $newidtdir); installer::windows::icon::create_icon_table(\@iconfilecollector, $newidtdir); # creating the icon table with all iconfiles used as shortcuts (FolderItems) installer::windows::createfolder::create_createfolder_table($directoriesforepmarrayref, $filesinproductlanguageresolvedarrayref, $newidtdir, $allvariableshashref); installer::windows::upgrade::create_upgrade_table($newidtdir, $allvariableshashref); installer::windows::msishortcutproperty::create_msishortcutproperty_table($folderitempropertiesinproductarrayref, $folderitemsinproductarrayref, $newidtdir); if (( ! $installer::globals::languagepack ) && ( ! $installer::globals::helppack )) # the following tables not for language packs or help packs { installer::windows::removefile::create_removefile_table($folderitemsinproductlanguageresolvedarrayref, $newidtdir); # Adding Assemblies into the tables MsiAssembly and MsiAssemblyName dynamically installer::windows::assembly::create_msiassembly_table($filesinproductlanguageresolvedarrayref, $newidtdir); installer::windows::assembly::create_msiassemblyname_table($filesinproductlanguageresolvedarrayref, $newidtdir); installer::windows::assembly::add_assembly_condition_into_component_table($filesinproductlanguageresolvedarrayref, $newidtdir); } $infoline = "\n"; push(@installer::globals::logfileinfo, $infoline); # Localizing the language dependent idt files # For every language there will be a localized msi database # For multilingual installation sets, the differences of this # databases have to be stored in transforms. for ( my $m = 0; $m <= $#{\@setuplanguagesarray}; $m++ ) { my $onelanguage = ${\@setuplanguagesarray}[$m]; my $is_rtl = 0; my @rtllanguages = ("ar", "fa", "he", "ug", "ky-CN"); if ( grep {$_ eq $onelanguage} @rtllanguages ) { $is_rtl = 1; } my $languageidtdir = $idtdirbase . $installer::globals::separator . $onelanguage; if ( -d $languageidtdir ) { installer::systemactions::remove_complete_directory($languageidtdir, 1); } installer::systemactions::create_directory($languageidtdir); # Copy the template idt files and the new created idt files into this language directory installer::logger::print_message( "... copying idt files ...\n" ); installer::logger::include_header_into_logfile("Copying idt files to $languageidtdir:"); installer::windows::idtglobal::prepare_language_idt_directory($languageidtdir, $newidtdir, $onelanguage, $filesinproductlanguageresolvedarrayref, \@iconfilecollector, $binarytablefiles, $allvariableshashref); # Now all files are copied into a language specific directory # The template idt files can be translated installer::logger::print_message( "... localizing idt files (language: $onelanguage) ...\n" ); installer::logger::include_header_into_logfile("Localizing idt files (Language: $onelanguage):"); my @translationfiles = (); # all idt files, that need a translation push(@translationfiles, "ActionTe.idt"); push(@translationfiles, "Control.idt"); push(@translationfiles, "CustomAc.idt"); push(@translationfiles, "Error.idt"); push(@translationfiles, "LaunchCo.idt"); push(@translationfiles, "RadioBut.idt"); push(@translationfiles, "Property.idt"); push(@translationfiles, "UIText.idt"); my $oneidtfilename; my $oneidtfile; foreach $oneidtfilename (@translationfiles) { my $languagefilename = installer::windows::idtglobal::get_languagefilename($oneidtfilename, $installer::globals::idtlanguagepath); my $languagefile = installer::files::read_file($languagefilename); $oneidtfilename = $languageidtdir . $installer::globals::separator . $oneidtfilename; $oneidtfile = installer::files::read_file($oneidtfilename); # Now the substitution can start installer::windows::idtglobal::translate_idtfile($oneidtfile, $languagefile, $onelanguage); installer::files::save_file($oneidtfilename, $oneidtfile); $infoline = "Translated idt file: $oneidtfilename into language $onelanguage\n"; push(@installer::globals::logfileinfo, $infoline); $infoline = "Used languagefile: $languagefilename\n"; push(@installer::globals::logfileinfo, $infoline); } # setting bidi attributes, if required if ( $is_rtl ) { installer::windows::idtglobal::setbidiattributes($languageidtdir, $onelanguage); } # setting the condition, that at least one module is selected installer::windows::idtglobal::set_multilanguageonly_condition($languageidtdir); # include the license text into the table Control.idt if ( ! $allvariableshashref->{'HIDELICENSEDIALOG'} ) { my $licensefilesource = installer::windows::idtglobal::get_rtflicensefilesource($onelanguage, $includepatharrayref_lang); my $licensefile = installer::files::read_file($licensefilesource); installer::scpzipfiles::replace_all_ziplistvariables_in_rtffile($licensefile, $allvariableshashref); my $controltablename = $languageidtdir . $installer::globals::separator . "Control.idt"; my $controltable = installer::files::read_file($controltablename); installer::windows::idtglobal::add_licensefile_to_database($licensefile, $controltable); installer::files::save_file($controltablename, $controltable); $infoline = "Added licensefile $licensefilesource into database $controltablename\n"; push(@installer::globals::logfileinfo, $infoline); } # include a component into environment table if required installer::windows::component::set_component_in_environment_table($languageidtdir, $filesinproductlanguageresolvedarrayref); # include the ProductCode and the UpgradeCode from codes-file into the Property.idt installer::windows::property::set_codes_in_property_table($languageidtdir); # the language specific properties can now be set in the Property.idt installer::windows::property::update_property_table($languageidtdir, $onelanguage, $allvariableshashref, $languagestringref); # replacing variables in RegLocat.idt installer::windows::msiglobal::update_reglocat_table($languageidtdir, $allvariableshashref); # replacing variables in RemoveRe.idt (RemoveRegistry.idt) installer::windows::msiglobal::update_removere_table($languageidtdir); # adding language specific properties for multilingual installation sets installer::windows::property::set_languages_in_property_table($languageidtdir, \@setuplanguagesarray); # adding settings into CheckBox.idt installer::windows::property::update_checkbox_table($languageidtdir, $allvariableshashref); # adding the files from the binary directory into the binary table installer::windows::binary::update_binary_table($languageidtdir, $filesinproductlanguageresolvedarrayref, $binarytablefiles); # Adding Windows Installer CustomActions installer::windows::idtglobal::addcustomactions($languageidtdir, $windowscustomactionsarrayref, $filesinproductlanguageresolvedarrayref); installer::logger::print_message( "... Analyze if custom action table must be patched with merge module directory names ...\n" ); my @customactions = (); for my $e (keys %installer::globals::merge_directory_hash) { my $var; installer::logger::print_message( "... analyzing directory from merge module: $e\n"); if (installer::windows::directory::has_standard_directory_prefix($e, \$var)) { installer::logger::print_message( "... emitting custom action to set the var $e to directory: $var\n"); push(@customactions, installer::windows::idtglobal::emit_custom_action_for_standard_directory($e, $var)); } } if (@customactions) { installer::logger::print_message( "... Patching custom action table with merge module directory names ...\n" ); #print Dumper(@customactions); installer::windows::idtglobal::addcustomactions($languageidtdir, \@customactions, $filesinproductlanguageresolvedarrayref); } # Then the language specific msi database can be created if ( $installer::globals::iswin || $installer::globals::packageformat eq 'msi' ) { my $msidatabasename = installer::windows::msiglobal::get_msidatabasename($allvariableshashref, $onelanguage); my $msifilename = $languageidtdir . $installer::globals::separator . $msidatabasename; installer::logger::print_message( "... creating msi database (language $onelanguage) ... \n" ); installer::windows::msiglobal::set_uuid_into_component_table($languageidtdir, $allvariableshashref); # setting new GUID for the components using the tool uuidgen.exe installer::windows::msiglobal::prepare_64bit_database($languageidtdir, $allvariableshashref); # making last 64 bit changes installer::windows::msiglobal::create_msi_database($languageidtdir ,$msifilename); # validating the database # ToDo installer::windows::msiglobal::write_summary_into_msi_database($msifilename, $onelanguage, $languagefile, $allvariableshashref); # copy msi database into installation directory my $msidestfilename = $installdir . $installer::globals::separator . $msidatabasename; installer::systemactions::copy_one_file($msifilename, $msidestfilename); } } # Creating transforms, if the installation set has more than one language # renaming the msi database my $defaultlanguage = installer::languages::get_default_language(\@setuplanguagesarray); if ( $installer::globals::iswin || $installer::globals::packageformat eq 'msi' ) { if ( $#{\@setuplanguagesarray} > 0 ) { installer::windows::msiglobal::create_transforms(\@setuplanguagesarray, $defaultlanguage, $installdir, $allvariableshashref); } # if there are Merge Modules, they have to be integrated now my $mergedbname = installer::windows::msiglobal::get_msidatabasename($allvariableshashref, $defaultlanguage); my $mergeidtdir = $idtdirbase . $installer::globals::separator . "mergemodules"; if ( -d $mergeidtdir ) { installer::systemactions::remove_complete_directory($mergeidtdir, 1); } installer::systemactions::create_directory($mergeidtdir); installer::systemactions::copy_one_file($installdir . $installer::globals::separator . $mergedbname, $mergeidtdir . $installer::globals::separator . $mergedbname); $filesinproductlanguageresolvedarrayref = installer::windows::mergemodule::merge_mergemodules_into_msi_database($mergemodulesarrayref, $filesinproductlanguageresolvedarrayref, $mergeidtdir . $installer::globals::separator . $mergedbname, $languagestringref, $allvariableshashref, $includepatharrayref, $allupdatesequences, $allupdatelastsequences, $allupdatediskids); installer::systemactions::copy_one_file($mergeidtdir . $installer::globals::separator . $mergedbname, $installdir . $installer::globals::separator . $mergedbname); installer::windows::msiglobal::rename_msi_database_in_installset($defaultlanguage, $installdir, $allvariableshashref); } # Analyzing the ScpActions and copying the files into the installation set installer::logger::print_message( "... copying files into installation set ...\n" ); installer::worker::put_scpactions_into_installset($installdir); # ... copying MergeModules into installation set if ( ! $installer::globals::fix_number_of_cab_files ) { installer::windows::msiglobal::copy_merge_modules_into_installset($installdir); } installer::logger::print_message( "... creating ddf files ...\n" ); # Creating all needed ddf files and generating a list # for the package process containing all system calls my $ddfdir = installer::systemactions::create_directories("ddf", $languagestringref); my $packjobref = installer::windows::msiglobal::generate_cab_file_list($filesinproductlanguageresolvedarrayref, $installdir, $ddfdir, $allvariableshashref); # Update and patch reasons the pack order needs to be saved installer::windows::msiglobal::save_packorder(); $infoline = "\n"; push(@installer::globals::logfileinfo, $infoline); #################################### # Writing log file # before cab files are packed #################################### installer::logger::print_message( "... creating log file $installer::globals::logfilename \n" ); installer::files::save_file($loggingdir . $installer::globals::logfilename, \@installer::globals::logfileinfo); ####################################################### # Finally really create the installation packages, # Only for Windows and only on a windows platform. ####################################################### if ( $installer::globals::iswin || $installer::globals::packageformat eq 'msi' ) { installer::logger::print_message( "... packaging installation set ... \n" ); installer::windows::msiglobal::execute_packaging($packjobref, $loggingdir, $allvariableshashref); if ( $installer::globals::include_cab_in_msi ) { installer::windows::msiglobal::include_cabs_into_msi($installdir); } #################################### # Writing log file # after cab files are packed #################################### installer::logger::print_message( "\n... creating log file $installer::globals::logfilename \n" ); installer::files::save_file($loggingdir . $installer::globals::logfilename, \@installer::globals::logfileinfo); } ####################################################### # Analyzing the log file ####################################################### my $is_success = 0; my $finalinstalldir = ""; installer::worker::clean_output_tree(); # removing directories created in the output tree ($is_success, $finalinstalldir) = installer::worker::analyze_and_save_logfile($loggingdir, $installdir, $installlogdir, $allsettingsarrayref, $languagestringref, $current_install_number); ####################################################### # Creating Windows msp patches ####################################################### if (( $is_success ) && ( $installer::globals::updatedatabase ) && ( $allvariableshashref->{'CREATE_MSP_INSTALLSET'} )) { # Required: # Temp path for administrative installations: $installer::globals::temppath # Path of new installation set: $finalinstalldir # Path of old installation set: $installer::globals::updatedatabasepath my $mspdir = installer::windows::msp::create_msp_patch($finalinstalldir, $includepatharrayref, $allvariableshashref, $languagestringref, $languagesarrayref, $filesinproductlanguageresolvedarrayref); ($is_success, $finalinstalldir) = installer::worker::analyze_and_save_logfile($loggingdir, $mspdir, $installlogdir, $allsettingsarrayref, $languagestringref, $current_install_number); installer::worker::clean_output_tree(); # removing directories created in the output tree } ####################################################### # Creating download installation set ####################################################### my $create_download = 0; my $downloadname = installer::ziplist::getinfofromziplist($allsettingsarrayref, "downloadname"); if ( $installer::globals::languagepack ) { $downloadname = installer::ziplist::getinfofromziplist($allsettingsarrayref, "langpackdownloadname"); } if ( $installer::globals::helppack ) { $downloadname = installer::ziplist::getinfofromziplist($allsettingsarrayref, "helppackdownloadname"); } if ( $$downloadname ne "" ) { $create_download = 1; } if ( $installer::globals::iswindowsbuild ) { $create_download = 0; if ( $allvariableshashref->{'OOODOWNLOADNAME'} ) { $$downloadname = installer::download::set_download_filename($languagestringref, $allvariableshashref); } else { $$downloadname = installer::download::resolve_variables_in_downloadname($allvariableshashref, $$downloadname, $languagestringref); } installer::systemactions::rename_one_file( $finalinstalldir . $installer::globals::separator . $installer::globals::shortmsidatabasename, $finalinstalldir . $installer::globals::separator . $$downloadname . ".msi" ); if ( defined($ENV{'WINDOWS_BUILD_SIGNING'}) && ($ENV{'WINDOWS_BUILD_SIGNING'} eq 'TRUE') && ( $allvariableshashref->{'CREATE_MSP_INSTALLSET'} eq '0')) { my $systemcall = "signtool.exe sign "; if ( defined($ENV{'PFXFILE'}) ) { $systemcall .= "-f $ENV{'PFXFILE'} "; } if ( defined($ENV{'PFXPASSWORD'}) ) { $systemcall .= "-p $ENV{'PFXPASSWORD'} "; } if ( defined($ENV{'TIMESTAMPURL'}) ) { $systemcall .= "-t $ENV{'TIMESTAMPURL'} "; } else { $systemcall .= "-t http://timestamp.digicert.com/ "; } $systemcall .= "-d \"" . installer::download::get_downloadname_productname($allvariableshashref) . " " . installer::download::get_download_version($allvariableshashref) . " " . installer::download::get_downloadname_language($languagestringref) . " " . installer::download::get_download_functionality($allvariableshashref) . "\" "; $systemcall .= $finalinstalldir . $installer::globals::separator . $$downloadname . ".msi"; installer::logger::print_message( "... code signing and timestamping with signtool.exe ...\n" ); my $returnvalue = system($systemcall); # do not print password to log if ( defined($ENV{'PFXPASSWORD'}) ) { $systemcall =~ s/$ENV{'PFXPASSWORD'}/********/; } my $infoline = "Systemcall: $systemcall\n"; push( @installer::globals::logfileinfo, $infoline); if ($returnvalue) { $infoline = "ERROR: Could not execute \"$systemcall\"!\n"; push( @installer::globals::logfileinfo, $infoline); } else { $infoline = "Success: Executed \"$systemcall\" successfully!\n"; push( @installer::globals::logfileinfo, $infoline); } } } if (( $is_success ) && ( $create_download ) && ( $ENV{'ENABLE_DOWNLOADSETS'} )) { my $downloaddir = installer::download::create_download_sets($finalinstalldir, $includepatharrayref, $allvariableshashref, $$downloadname, $languagestringref, $languagesarrayref); installer::worker::analyze_and_save_logfile($loggingdir, $downloaddir, $installlogdir, $allsettingsarrayref, $languagestringref, $current_install_number); } } # end of "if ( $installer::globals::iswindowsbuild )" # saving file_info file for later analysis my $speciallogfilename = $loggingdir . "fileinfo_" . $installer::globals::product . "\.log"; open my $log_fh, '>', $speciallogfilename or die "Could not open $speciallogfilename for writing: $!"; print $log_fh Dumper($filesinproductlanguageresolvedarrayref); } # end of iteration for one language group } sub cleanup_on_error { my $message = shift; # If an installation set is currently created, the directory name # is saved in $installer::globals::saveinstalldir. If this # directory name contains "_inprogress", it has to be renamed to # "_witherror". if ( $installer::globals::saveinstalldir =~ /_inprogress/ ) { installer::systemactions::rename_string_in_directory($installer::globals::saveinstalldir, "_inprogress", "_witherror"); } # Removing directories created in the output tree. installer::worker::clean_output_tree(); $installer::globals::logfilename = $installer::globals::exitlog . $installer::globals::logfilename; my @log = (@installer::globals::logfileinfo, @installer::globals::globallogfileinfo); push(@log, "\n" . '*' x 65 . "\n"); push(@log, $message); push(@log, '*' x 65 . "\n"); installer::files::save_file($installer::globals::logfilename, \@log); print("ERROR, saved logfile $installer::globals::logfilename is:\n"); open(my $log, "<", $installer::globals::logfilename); print ": $_" while (<$log>); print "\n"; close($log); } 1;