/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "guisaveas.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "alienwarn.hxx" #include #include #include #include #include #include #include "../appl/app.hrc" #include #include #include #include #include #include // flags that specify requested operation #define EXPORT_REQUESTED 1 #define PDFEXPORT_REQUESTED 2 #define PDFDIRECTEXPORT_REQUESTED 4 #define WIDEEXPORT_REQUESTED 8 #define SAVE_REQUESTED 16 #define SAVEAS_REQUESTED 32 #define SAVEACOPY_REQUESTED 64 // possible statuses of save operation #define STATUS_NO_ACTION 0 #define STATUS_SAVE 1 #define STATUS_SAVEAS 2 #define STATUS_SAVEAS_STANDARDNAME 3 const char aFilterNameString[] = "FilterName"; const char aFilterOptionsString[] = "FilterOptions"; const char aFilterDataString[] = "FilterData"; const char aFilterFlagsString[] = "FilterFlags"; using namespace ::com::sun::star; using namespace css::system; namespace { static sal_uInt16 getSlotIDFromMode( sal_Int8 nStoreMode ) { // This is a temporary hardcoded solution must be removed when // dialogs do not need parameters in SidSet representation any more sal_uInt16 nResult = 0; if ( nStoreMode == EXPORT_REQUESTED || nStoreMode == ( EXPORT_REQUESTED | SAVEACOPY_REQUESTED | WIDEEXPORT_REQUESTED ) ) nResult = SID_EXPORTDOC; else if ( nStoreMode == ( EXPORT_REQUESTED | PDFEXPORT_REQUESTED ) ) nResult = SID_EXPORTDOCASPDF; else if ( nStoreMode == ( EXPORT_REQUESTED | PDFEXPORT_REQUESTED | PDFDIRECTEXPORT_REQUESTED ) ) nResult = SID_DIRECTEXPORTDOCASPDF; else if ( nStoreMode == SAVEAS_REQUESTED || nStoreMode == ( EXPORT_REQUESTED | WIDEEXPORT_REQUESTED ) ) nResult = SID_SAVEASDOC; else { DBG_ASSERT( false, "Unacceptable slot name is provided!\n" ); } return nResult; } static sal_uInt8 getStoreModeFromSlotName( const OUString& aSlotName ) { sal_uInt8 nResult = 0; if ( aSlotName == "ExportTo" ) nResult = EXPORT_REQUESTED; else if ( aSlotName == "ExportToPDF" ) nResult = EXPORT_REQUESTED | PDFEXPORT_REQUESTED; else if ( aSlotName == "ExportDirectToPDF" ) nResult = EXPORT_REQUESTED | PDFEXPORT_REQUESTED | PDFDIRECTEXPORT_REQUESTED; else if ( aSlotName == "Save" ) nResult = SAVE_REQUESTED; else if ( aSlotName == "SaveAs" ) nResult = SAVEAS_REQUESTED; else throw task::ErrorCodeIOException( ("getStoreModeFromSlotName(\"" + aSlotName + "): ERRCODE_IO_INVALIDPARAMETER"), uno::Reference< uno::XInterface >(), ERRCODE_IO_INVALIDPARAMETER ); return nResult; } static sal_Int32 getMustFlags( sal_Int8 nStoreMode ) { return ( SFX_FILTER_EXPORT | ( ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) ? 0 : SFX_FILTER_IMPORT ) ); } static sal_Int32 getDontFlags( sal_Int8 nStoreMode ) { return ( SFX_FILTER_INTERNAL | SFX_FILTER_NOTINFILEDLG | ( ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) ? SFX_FILTER_IMPORT : 0 ) ); } // class DocumentSettingsGuard class DocumentSettingsGuard { uno::Reference< beans::XPropertySet > m_xDocumentSettings; bool m_bPreserveReadOnly; bool m_bReadOnlySupported; bool m_bRestoreSettings; public: DocumentSettingsGuard( const uno::Reference< frame::XModel >& xModel, bool bReadOnly, bool bRestore ) : m_bPreserveReadOnly( false ) , m_bReadOnlySupported( false ) , m_bRestoreSettings( bRestore ) { try { uno::Reference< lang::XMultiServiceFactory > xDocSettingsSupplier( xModel, uno::UNO_QUERY_THROW ); m_xDocumentSettings.set( xDocSettingsSupplier->createInstance( OUString( "com.sun.star.document.Settings" ) ), uno::UNO_QUERY_THROW ); OUString aLoadReadonlyString( "LoadReadonly" ); try { m_xDocumentSettings->getPropertyValue( aLoadReadonlyString ) >>= m_bPreserveReadOnly; m_xDocumentSettings->setPropertyValue( aLoadReadonlyString, uno::makeAny( bReadOnly ) ); m_bReadOnlySupported = true; } catch( const uno::Exception& ) {} } catch( const uno::Exception& ) {} if ( ( bReadOnly && !m_bReadOnlySupported ) ) throw uno::RuntimeException(); // the user could provide the data, so it must be stored } ~DocumentSettingsGuard() { if ( m_bRestoreSettings ) { OUString aLoadReadonlyString( "LoadReadonly" ); try { if ( m_bReadOnlySupported ) m_xDocumentSettings->setPropertyValue( aLoadReadonlyString, uno::makeAny( m_bPreserveReadOnly ) ); } catch( const uno::Exception& ) { OSL_FAIL( "Unexpected exception!" ); } } } }; } // anonymous namespace // class ModelData_Impl class ModelData_Impl { SfxStoringHelper* m_pOwner; uno::Reference< frame::XModel > m_xModel; uno::Reference< frame::XStorable > m_xStorable; uno::Reference< frame::XStorable2 > m_xStorable2; uno::Reference< util::XModifiable > m_xModifiable; OUString m_aModuleName; ::comphelper::SequenceAsHashMap* m_pDocumentPropsHM; ::comphelper::SequenceAsHashMap* m_pModulePropsHM; ::comphelper::SequenceAsHashMap m_aMediaDescrHM; bool m_bRecommendReadOnly; public: ModelData_Impl( SfxStoringHelper& aOwner, const uno::Reference< frame::XModel >& xModel, const uno::Sequence< beans::PropertyValue >& aMediaDescr ); ~ModelData_Impl(); void FreeDocumentProps(); uno::Reference< frame::XModel > GetModel(); uno::Reference< frame::XStorable > GetStorable(); uno::Reference< frame::XStorable2 > GetStorable2(); uno::Reference< util::XModifiable > GetModifiable(); ::comphelper::SequenceAsHashMap& GetMediaDescr() { return m_aMediaDescrHM; } bool IsRecommendReadOnly() const { return m_bRecommendReadOnly; } const ::comphelper::SequenceAsHashMap& GetDocProps(); OUString GetModuleName(); const ::comphelper::SequenceAsHashMap& GetModuleProps(); void CheckInteractionHandler(); OUString GetDocServiceName(); uno::Sequence< beans::PropertyValue > GetDocServiceDefaultFilterCheckFlags( sal_Int32 nMust, sal_Int32 nDont ); uno::Sequence< beans::PropertyValue > GetDocServiceAnyFilter( sal_Int32 nMust, sal_Int32 nDont ); uno::Sequence< beans::PropertyValue > GetPreselectedFilter_Impl( sal_Int8 nStoreMode ); uno::Sequence< beans::PropertyValue > GetDocServiceDefaultFilter(); bool ExecuteFilterDialog_Impl( const OUString& aFilterName ); sal_Int8 CheckSaveAcceptable( sal_Int8 nCurStatus ); sal_Int8 CheckStateForSave(); sal_Int8 CheckFilter( const OUString& ); bool CheckFilterOptionsDialogExistence(); bool OutputFileDialog( sal_Int8 nStoreMode, const ::comphelper::SequenceAsHashMap& aPreselectedFilterPropsHM, bool bSetStandardName, OUString& aSuggestedName, bool bPreselectPassword, OUString& aSuggestedDir, sal_Int16 nDialog, const OUString& rStandardDir, const ::com::sun::star::uno::Sequence< OUString >& rBlackList ); bool ShowDocumentInfoDialog(); OUString GetRecommendedDir( const OUString& aSuggestedDir ); OUString GetRecommendedName( const OUString& aSuggestedName, const OUString& aTypeName ); }; ModelData_Impl::ModelData_Impl( SfxStoringHelper& aOwner, const uno::Reference< frame::XModel >& xModel, const uno::Sequence< beans::PropertyValue >& aMediaDescr ) : m_pOwner( &aOwner ) , m_xModel( xModel ) , m_pDocumentPropsHM( NULL ) , m_pModulePropsHM( NULL ) , m_aMediaDescrHM( aMediaDescr ) , m_bRecommendReadOnly( false ) { CheckInteractionHandler(); OUString sModuleName; try { uno::Reference< lang::XComponent > xCurrentComponent = frame::Desktop::create( comphelper::getProcessComponentContext() )->getCurrentComponent(); sModuleName = aOwner.GetModuleManager()->identify(xCurrentComponent); if(sModuleName == "com.sun.star.chart2.ChartDocument") { // let us switch the model and set the xStorable and // XStorable2 to the old model. // This is an ugly hack because we have no SfxObjectShell for chart2 yet. // We need SfxObjectShell for the heavy work around ODF document creation // because chart2 only writes the basic stream out. // In future in might make sense to implement a full scale object shell in // chart2 and make chart2 an own program. m_xModel = uno::Reference< frame::XModel >(xCurrentComponent, uno::UNO_QUERY_THROW ); m_xStorable = uno::Reference< frame::XStorable >(xModel, uno::UNO_QUERY_THROW ); m_xStorable2 = uno::Reference< frame::XStorable2 >(xModel, uno::UNO_QUERY_THROW ); } } catch(...) { // we don't want to pass on any errors; } } ModelData_Impl::~ModelData_Impl() { FreeDocumentProps(); if ( m_pDocumentPropsHM ) delete m_pDocumentPropsHM; if ( m_pModulePropsHM ) delete m_pModulePropsHM; } void ModelData_Impl::FreeDocumentProps() { if ( m_pDocumentPropsHM ) { delete m_pDocumentPropsHM; m_pDocumentPropsHM = NULL; } } uno::Reference< frame::XModel > ModelData_Impl::GetModel() { if ( !m_xModel.is() ) throw uno::RuntimeException(); return m_xModel; } uno::Reference< frame::XStorable > ModelData_Impl::GetStorable() { if ( !m_xStorable.is() ) { m_xStorable = uno::Reference< frame::XStorable >( m_xModel, uno::UNO_QUERY ); if ( !m_xStorable.is() ) throw uno::RuntimeException(); } return m_xStorable; } uno::Reference< frame::XStorable2 > ModelData_Impl::GetStorable2() { if ( !m_xStorable2.is() ) { m_xStorable2 = uno::Reference< frame::XStorable2 >( m_xModel, uno::UNO_QUERY ); if ( !m_xStorable2.is() ) throw uno::RuntimeException(); } return m_xStorable2; } uno::Reference< util::XModifiable > ModelData_Impl::GetModifiable() { if ( !m_xModifiable.is() ) { m_xModifiable = uno::Reference< util::XModifiable >( m_xModel, uno::UNO_QUERY ); if ( !m_xModifiable.is() ) throw uno::RuntimeException(); } return m_xModifiable; } const ::comphelper::SequenceAsHashMap& ModelData_Impl::GetDocProps() { if ( !m_pDocumentPropsHM ) m_pDocumentPropsHM = new ::comphelper::SequenceAsHashMap( GetModel()->getArgs() ); return *m_pDocumentPropsHM; } OUString ModelData_Impl::GetModuleName() { if ( m_aModuleName.isEmpty() ) { m_aModuleName = m_pOwner->GetModuleManager()->identify( uno::Reference< uno::XInterface >( m_xModel, uno::UNO_QUERY ) ); if ( m_aModuleName.isEmpty() ) throw uno::RuntimeException(); // TODO: } return m_aModuleName; } const ::comphelper::SequenceAsHashMap& ModelData_Impl::GetModuleProps() { if ( !m_pModulePropsHM ) { uno::Sequence< beans::PropertyValue > aModuleProps; m_pOwner->GetModuleManager()->getByName( GetModuleName() ) >>= aModuleProps; if ( !aModuleProps.getLength() ) throw uno::RuntimeException(); // TODO; m_pModulePropsHM = new ::comphelper::SequenceAsHashMap( aModuleProps ); } return *m_pModulePropsHM; } OUString ModelData_Impl::GetDocServiceName() { return GetModuleProps().getUnpackedValueOrDefault("ooSetupFactoryDocumentService", OUString()); } void ModelData_Impl::CheckInteractionHandler() { ::comphelper::SequenceAsHashMap::const_iterator aInteractIter = m_aMediaDescrHM.find( OUString("InteractionHandler") ); if ( aInteractIter == m_aMediaDescrHM.end() ) { try { m_aMediaDescrHM[ OUString("InteractionHandler") ] <<= task::InteractionHandler::createWithParent( comphelper::getProcessComponentContext(), 0); } catch( const uno::Exception& ) { } } else { uno::Reference< task::XInteractionHandler > xInteract; DBG_ASSERT( ( aInteractIter->second >>= xInteract ) && xInteract.is(), "Broken interaction handler is provided!\n" ); } } uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceDefaultFilter() { uno::Sequence< beans::PropertyValue > aProps; OUString aFilterName = GetModuleProps().getUnpackedValueOrDefault( OUString("ooSetupFactoryDefaultFilter"), OUString() ); m_pOwner->GetFilterConfiguration()->getByName( aFilterName ) >>= aProps; return aProps; } uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceDefaultFilterCheckFlags( sal_Int32 nMust, sal_Int32 nDont ) { uno::Sequence< beans::PropertyValue > aFilterProps; uno::Sequence< beans::PropertyValue > aProps = GetDocServiceDefaultFilter(); if ( aProps.getLength() ) { ::comphelper::SequenceAsHashMap aFiltHM( aProps ); sal_Int32 nFlags = aFiltHM.getUnpackedValueOrDefault("Flags", (sal_Int32)0 ); if ( ( ( nFlags & nMust ) == nMust ) && !( nFlags & nDont ) ) aFilterProps = aProps; } return aFilterProps; } uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceAnyFilter( sal_Int32 nMust, sal_Int32 nDont ) { uno::Sequence< beans::NamedValue > aSearchRequest( 1 ); aSearchRequest[0].Name = "DocumentService"; aSearchRequest[0].Value <<= GetDocServiceName(); return ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont ); } uno::Sequence< beans::PropertyValue > ModelData_Impl::GetPreselectedFilter_Impl( sal_Int8 nStoreMode ) { uno::Sequence< beans::PropertyValue > aFilterProps; sal_Int32 nMust = getMustFlags( nStoreMode ); sal_Int32 nDont = getDontFlags( nStoreMode ); if ( nStoreMode & PDFEXPORT_REQUESTED ) { // Preselect PDF-Filter for EXPORT uno::Sequence< beans::NamedValue > aSearchRequest( 2 ); aSearchRequest[0].Name = "Type"; aSearchRequest[0].Value <<= OUString("pdf_Portable_Document_Format"); aSearchRequest[1].Name = "DocumentService"; aSearchRequest[1].Value <<= GetDocServiceName(); aFilterProps = ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont ); } else { aFilterProps = GetDocServiceDefaultFilterCheckFlags( nMust, nDont ); if ( !aFilterProps.getLength() ) { // the default filter was not faund, use just the first acceptable one aFilterProps = GetDocServiceAnyFilter( nMust, nDont ); } } return aFilterProps; } bool ModelData_Impl::ExecuteFilterDialog_Impl( const OUString& aFilterName ) { bool bDialogUsed = false; try { uno::Sequence < beans::PropertyValue > aProps; uno::Any aAny = m_pOwner->GetFilterConfiguration()->getByName( aFilterName ); if ( aAny >>= aProps ) { sal_Int32 nPropertyCount = aProps.getLength(); for( sal_Int32 nProperty=0; nProperty < nPropertyCount; ++nProperty ) { if( aProps[nProperty].Name == "UIComponent" ) { OUString aServiceName; aProps[nProperty].Value >>= aServiceName; if( !aServiceName.isEmpty() ) { uno::Reference< ui::dialogs::XExecutableDialog > xFilterDialog( comphelper::getProcessServiceFactory()->createInstance( aServiceName ), uno::UNO_QUERY ); uno::Reference< beans::XPropertyAccess > xFilterProperties( xFilterDialog, uno::UNO_QUERY ); if( xFilterDialog.is() && xFilterProperties.is() ) { bDialogUsed = true; uno::Reference< document::XExporter > xExporter( xFilterDialog, uno::UNO_QUERY ); if( xExporter.is() ) xExporter->setSourceDocument( uno::Reference< lang::XComponent >( GetModel(), uno::UNO_QUERY ) ); uno::Sequence< beans::PropertyValue > aPropsForDialog; GetMediaDescr() >> aPropsForDialog; xFilterProperties->setPropertyValues( aPropsForDialog ); if( xFilterDialog->execute() ) { uno::Sequence< beans::PropertyValue > aPropsFromDialog = xFilterProperties->getPropertyValues(); for ( sal_Int32 nInd = 0; nInd < aPropsFromDialog.getLength(); nInd++ ) GetMediaDescr()[aPropsFromDialog[nInd].Name] = aPropsFromDialog[nInd].Value; } else { throw task::ErrorCodeIOException( ("ModelData_Impl::ExecuteFilterDialog_Impl:" " ERRCODE_IO_ABORT"), uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); } } } break; } } } } catch( const container::NoSuchElementException& e ) { // the filter name is unknown throw task::ErrorCodeIOException( ("ModelData_Impl::ExecuteFilterDialog_Impl: NoSuchElementException" " \"" + e.Message + "\": ERRCODE_IO_ABORT"), uno::Reference< uno::XInterface >(), ERRCODE_IO_INVALIDPARAMETER); } catch( const task::ErrorCodeIOException& ) { throw; } catch( const uno::Exception& e ) { SAL_WARN("sfx.doc", "ignoring UNO exception " << e.Message); } return bDialogUsed; } sal_Int8 ModelData_Impl::CheckSaveAcceptable( sal_Int8 nCurStatus ) { sal_Int8 nResult = nCurStatus; if ( nResult != STATUS_NO_ACTION && GetStorable()->hasLocation() ) { // the saving is acceptable // in case the configuration entry is not set or set to false // or in case of version creation OUString aVersionCommentString = "VersionComment"; if ( officecfg::Office::Common::Save::Document::AlwaysSaveAs::get() && GetMediaDescr().find( aVersionCommentString ) == GetMediaDescr().end() ) { // notify the user that SaveAs is going to be done vcl::Window* pWin = SfxStoringHelper::GetModelWindow( m_xModel ); MessageDialog aMessageBox(pWin, SfxResId(STR_NEW_FILENAME_SAVE), VCL_MESSAGE_QUESTION, VCL_BUTTONS_OK_CANCEL); if ( aMessageBox.Execute() == RET_OK ) nResult = STATUS_SAVEAS; else nResult = STATUS_NO_ACTION; } } return nResult; } sal_Int8 ModelData_Impl::CheckStateForSave() { // if the document is readonly or a new one a SaveAs operation must be used if ( !GetStorable()->hasLocation() || GetStorable()->isReadonly() ) return STATUS_SAVEAS; // check acceptable entries for media descriptor bool bVersInfoNeedsStore = false; ::comphelper::SequenceAsHashMap aAcceptedArgs; OUString aVersionCommentString("VersionComment"); OUString aAuthorString("Author"); OUString aInteractionHandlerString("InteractionHandler"); OUString aStatusIndicatorString("StatusIndicator"); OUString aFailOnWarningString("FailOnWarning"); if ( GetMediaDescr().find( aVersionCommentString ) != GetMediaDescr().end() ) { bVersInfoNeedsStore = true; aAcceptedArgs[ aVersionCommentString ] = GetMediaDescr()[ aVersionCommentString ]; } if ( GetMediaDescr().find( aAuthorString ) != GetMediaDescr().end() ) aAcceptedArgs[ aAuthorString ] = GetMediaDescr()[ aAuthorString ]; if ( GetMediaDescr().find( aInteractionHandlerString ) != GetMediaDescr().end() ) aAcceptedArgs[ aInteractionHandlerString ] = GetMediaDescr()[ aInteractionHandlerString ]; if ( GetMediaDescr().find( aStatusIndicatorString ) != GetMediaDescr().end() ) aAcceptedArgs[ aStatusIndicatorString ] = GetMediaDescr()[ aStatusIndicatorString ]; if ( GetMediaDescr().find( aFailOnWarningString ) != GetMediaDescr().end() ) aAcceptedArgs[ aFailOnWarningString ] = GetMediaDescr()[ aFailOnWarningString ]; // remove unacceptable entry if there is any DBG_ASSERT( GetMediaDescr().size() == aAcceptedArgs.size(), "Unacceptable parameters are provided in Save request!\n" ); if ( GetMediaDescr().size() != aAcceptedArgs.size() ) GetMediaDescr() = aAcceptedArgs; // the document must be modified unless the always-save flag is set. SvtMiscOptions aMiscOptions; bool bAlwaysAllowSave = aMiscOptions.IsSaveAlwaysAllowed(); if (!bAlwaysAllowSave) { if ( !GetModifiable()->isModified() && !bVersInfoNeedsStore ) return STATUS_NO_ACTION; } // check that the old filter is acceptable OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( OUString(aFilterNameString), OUString() ); sal_Int8 nResult = CheckFilter( aOldFilterName ); return nResult; } bool hasMacros( const uno::Reference< frame::XModel >& xModel ) { bool bHasMacros = false; uno::Reference< script::XLibraryContainer > xContainer; uno::Reference< beans::XPropertySet > xProps( xModel, uno::UNO_QUERY ); if ( xProps.is() ) { xProps->getPropertyValue( "BasicLibraries" ) >>= xContainer; bHasMacros = sfx2::DocumentMacroMode::containerHasBasicMacros( xContainer ); } return bHasMacros; } sal_Int8 ModelData_Impl::CheckFilter( const OUString& aFilterName ) { ::comphelper::SequenceAsHashMap aFiltPropsHM; sal_Int32 nFiltFlags = 0; if ( !aFilterName.isEmpty() ) { // get properties of filter uno::Sequence< beans::PropertyValue > aFilterProps; if ( !aFilterName.isEmpty() ) m_pOwner->GetFilterConfiguration()->getByName( aFilterName ) >>= aFilterProps; aFiltPropsHM = ::comphelper::SequenceAsHashMap( aFilterProps ); nFiltFlags = aFiltPropsHM.getUnpackedValueOrDefault("Flags", (sal_Int32)0 ); } // only a temporary solution until default filter retrieving feature is implemented // then GetDocServiceDefaultFilter() must be used ::comphelper::SequenceAsHashMap aDefFiltPropsHM = GetDocServiceDefaultFilterCheckFlags( 3, 0 ); sal_Int32 nDefFiltFlags = aDefFiltPropsHM.getUnpackedValueOrDefault("Flags", (sal_Int32)0 ); // if the old filter is not acceptable // and there is no default filter or it is not acceptable for requested parameters then proceed with saveAs if ( ( !aFiltPropsHM.size() || !( nFiltFlags & SFX_FILTER_EXPORT ) ) && ( !aDefFiltPropsHM.size() || !( nDefFiltFlags & SFX_FILTER_EXPORT ) || nDefFiltFlags & SFX_FILTER_INTERNAL ) ) return STATUS_SAVEAS; // so at this point there is either an acceptable old filter or default one if ( !aFiltPropsHM.size() || !( nFiltFlags & SFX_FILTER_EXPORT ) ) { // so the default filter must be acceptable return STATUS_SAVEAS_STANDARDNAME; } else if ( ( !( nFiltFlags & SFX_FILTER_OWN ) || ( nFiltFlags & SFX_FILTER_ALIEN ) ) && aDefFiltPropsHM.size() && ( nDefFiltFlags & SFX_FILTER_EXPORT ) && !( nDefFiltFlags & SFX_FILTER_INTERNAL )) { // the default filter is acceptable and the old filter is alien one // so ask to make a saveAs operation OUString aUIName = aFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString() ); OUString aDefUIName = aDefFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString() ); OUString aPreusedFilterName = GetDocProps().getUnpackedValueOrDefault( OUString("PreusedFilterName"), OUString() ); if ( !aPreusedFilterName.equals( aFilterName ) && !aUIName.equals( aDefUIName ) ) { // is it possible to get these names from somewhere and not just // hardcode them? OUString sXLSXFilter("Calc MS Excel 2007 XML"); OUString sOtherXLSXFilter("Calc Office Open XML"); bool bHasMacros = hasMacros( GetModel() ); if ( bHasMacros && ( aFilterName == sXLSXFilter || aFilterName == sOtherXLSXFilter ) ) { uno::Reference< task::XInteractionHandler > xHandler; GetMediaDescr()[ OUString( "InteractionHandler" ) ] >>= xHandler; bool bResult = false; if ( xHandler.is() ) { try { task::ErrorCodeRequest aErrorCode; aErrorCode.ErrCode = ERRCODE_SFX_VBASIC_CANTSAVE_STORAGE; uno::Any aRequest = uno::makeAny( aErrorCode ); uno::Sequence< uno::Reference< task::XInteractionContinuation > > aContinuations( 2 ); ::rtl::Reference< ::comphelper::OInteractionApprove > pApprove( new ::comphelper::OInteractionApprove ); aContinuations[ 0 ] = pApprove.get(); ::rtl::Reference< ::comphelper::OInteractionAbort > pAbort( new ::comphelper::OInteractionAbort ); aContinuations[ 1 ] = pAbort.get(); xHandler->handle(::framework::InteractionRequest::CreateRequest (aRequest,aContinuations)); bResult = pApprove->wasSelected(); } catch( const uno::Exception& ) { } if ( !bResult ) return STATUS_SAVEAS; } } if ( !SfxStoringHelper::WarnUnacceptableFormat( GetModel(), aUIName, aDefUIName, true ) ) return STATUS_SAVEAS_STANDARDNAME; } } return STATUS_SAVE; } bool ModelData_Impl::CheckFilterOptionsDialogExistence() { uno::Sequence< beans::NamedValue > aSearchRequest( 1 ); aSearchRequest[0].Name = "DocumentService"; aSearchRequest[0].Value <<= GetDocServiceName(); uno::Reference< container::XEnumeration > xFilterEnum = m_pOwner->GetFilterQuery()->createSubSetEnumerationByProperties( aSearchRequest ); while ( xFilterEnum->hasMoreElements() ) { uno::Sequence< beans::PropertyValue > pProps; if ( xFilterEnum->nextElement() >>= pProps ) { ::comphelper::SequenceAsHashMap aPropsHM( pProps ); OUString aUIServName = aPropsHM.getUnpackedValueOrDefault( OUString("UIComponent"), OUString() ); if ( !aUIServName.isEmpty() ) return true; } } return false; } bool ModelData_Impl::OutputFileDialog( sal_Int8 nStoreMode, const ::comphelper::SequenceAsHashMap& aPreselectedFilterPropsHM, bool bSetStandardName, OUString& aSuggestedName, bool bPreselectPassword, OUString& aSuggestedDir, sal_Int16 nDialog, const OUString& rStandardDir, const ::com::sun::star::uno::Sequence< OUString >& rBlackList) { bool bUseFilterOptions = false; ::comphelper::SequenceAsHashMap::const_iterator aOverwriteIter = GetMediaDescr().find( OUString("Overwrite") ); // the file name must be specified if overwrite option is set if ( aOverwriteIter != GetMediaDescr().end() ) throw task::ErrorCodeIOException( "ModelData_Impl::OutputFileDialog: ERRCODE_IO_INVALIDPARAMETER", uno::Reference< uno::XInterface >(), ERRCODE_IO_INVALIDPARAMETER); // no target file name is specified // we need to show the file dialog // check if we have a filter which allows for filter options, so we need a corresponding checkbox in the dialog bool bAllowOptions = false; // in case of Export, filter options dialog is used if available if( !( nStoreMode & EXPORT_REQUESTED ) || ( nStoreMode & WIDEEXPORT_REQUESTED ) ) bAllowOptions = CheckFilterOptionsDialogExistence(); // get the filename by dialog ... // create the file dialog sal_Int16 aDialogMode = bAllowOptions ? (com::sun::star::ui::dialogs::TemplateDescription:: FILESAVE_AUTOEXTENSION_PASSWORD_FILTEROPTIONS) : (com::sun::star::ui::dialogs::TemplateDescription:: FILESAVE_AUTOEXTENSION_PASSWORD); sal_Int64 aDialogFlags = 0; if( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) { if ( nStoreMode & PDFEXPORT_REQUESTED ) aDialogMode = com::sun::star::ui::dialogs::TemplateDescription:: FILESAVE_AUTOEXTENSION; else aDialogMode = com::sun::star::ui::dialogs::TemplateDescription:: FILESAVE_AUTOEXTENSION_SELECTION; aDialogFlags = SFXWB_EXPORT; } if( ( nStoreMode & EXPORT_REQUESTED ) && ( nStoreMode & SAVEACOPY_REQUESTED ) && ( nStoreMode & WIDEEXPORT_REQUESTED ) ) { aDialogFlags = SFXWB_SAVEACOPY; } boost::scoped_ptr pFileDlg; OUString aDocServiceName = GetDocServiceName(); DBG_ASSERT( !aDocServiceName.isEmpty(), "No document service for this module set!" ); sal_Int32 nMust = getMustFlags( nStoreMode ); sal_Int32 nDont = getDontFlags( nStoreMode ); sfx2::FileDialogHelper::Context eCtxt = sfx2::FileDialogHelper::UNKNOWN_CONTEXT; if ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) { if ( ( nStoreMode & PDFEXPORT_REQUESTED ) && aPreselectedFilterPropsHM.size() ) { // this is a PDF export // the filter options has been shown already OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( OUString("UIName"), OUString() ); pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aFilterUIName, OUString( "pdf" ), rStandardDir, rBlackList )); pFileDlg->SetCurrentFilter( aFilterUIName ); } else { // This is the normal dialog pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aDocServiceName, nDialog, nMust, nDont, rStandardDir, rBlackList )); } if ( aDocServiceName == "com.sun.star.drawing.DrawingDocument" ) eCtxt = sfx2::FileDialogHelper::SD_EXPORT; else if ( aDocServiceName == "com.sun.star.presentation.PresentationDocument" ) eCtxt = sfx2::FileDialogHelper::SI_EXPORT; else if ( aDocServiceName == "com.sun.star.text.TextDocument" ) eCtxt = sfx2::FileDialogHelper::SW_EXPORT; if ( eCtxt != sfx2::FileDialogHelper::UNKNOWN_CONTEXT ) pFileDlg->SetContext( eCtxt ); pFileDlg->CreateMatcher( aDocServiceName ); uno::Reference< ui::dialogs::XFilePicker > xFilePicker = pFileDlg->GetFilePicker(); uno::Reference< ui::dialogs::XFilePickerControlAccess > xControlAccess = uno::Reference< ui::dialogs::XFilePickerControlAccess >( xFilePicker, uno::UNO_QUERY ); if ( xControlAccess.is() ) { OUString aCtrlText = SfxResId(STR_EXPORTBUTTON).toString(); xControlAccess->setLabel( ui::dialogs::CommonFilePickerElementIds::PUSHBUTTON_OK, aCtrlText ); aCtrlText = SfxResId(STR_LABEL_FILEFORMAT).toString(); xControlAccess->setLabel( ui::dialogs::CommonFilePickerElementIds::LISTBOX_FILTER_LABEL, aCtrlText ); } } else { // This is the normal dialog pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aDocServiceName, nDialog, nMust, nDont, rStandardDir, rBlackList )); pFileDlg->CreateMatcher( aDocServiceName ); } OUString aAdjustToType; const OUString sFilterNameString(aFilterNameString); if ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) { // it is export, set the preselected filter OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( OUString("UIName"), OUString() ); pFileDlg->SetCurrentFilter( aFilterUIName ); aAdjustToType = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( OUString("Type"), OUString() ); } // it is no export, bSetStandardName == true means that user agreed to store document in the default (default default ;-)) format else if ( bSetStandardName || GetStorable()->hasLocation() ) { uno::Sequence< beans::PropertyValue > aOldFilterProps; OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() ); if ( !aOldFilterName.isEmpty() ) m_pOwner->GetFilterConfiguration()->getByName( aOldFilterName ) >>= aOldFilterProps; ::comphelper::SequenceAsHashMap aOldFiltPropsHM( aOldFilterProps ); sal_Int32 nOldFiltFlags = aOldFiltPropsHM.getUnpackedValueOrDefault("Flags", (sal_Int32)0 ); if ( bSetStandardName || ( nOldFiltFlags & nMust ) != nMust || nOldFiltFlags & nDont ) { // the suggested type will be changed, the extension should be adjusted aAdjustToType = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( OUString("Type"), OUString() ); OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( OUString("UIName"), OUString() ); pFileDlg->SetCurrentFilter( aFilterUIName ); } else { pFileDlg->SetCurrentFilter( aOldFiltPropsHM.getUnpackedValueOrDefault( OUString("UIName"), OUString() ) ); } } OUString aRecommendedDir = GetRecommendedDir( aSuggestedDir ); if ( !aRecommendedDir.isEmpty() ) pFileDlg->SetDisplayFolder( aRecommendedDir ); OUString aRecommendedName = GetRecommendedName( aSuggestedName, aAdjustToType ); if ( !aRecommendedName.isEmpty() ) pFileDlg->SetFileName( aRecommendedName ); uno::Reference < view::XSelectionSupplier > xSel( GetModel()->getCurrentController(), uno::UNO_QUERY ); if ( xSel.is() && xSel->getSelection().hasValue() ) GetMediaDescr()[OUString("SelectionOnly")] <<= sal_True; // This is a temporary hardcoded solution must be removed when // dialogs do not need parameters in SidSet representation any more sal_uInt16 nSlotID = getSlotIDFromMode( nStoreMode ); if ( !nSlotID ) throw lang::IllegalArgumentException(); // TODO: // generate SidSet from MediaDescriptor and provide it into FileDialog // than merge changed SidSet back SfxAllItemSet aDialogParams( SfxGetpApp()->GetPool() ); SfxItemSet* pDialogParams = &aDialogParams; TransformParameters( nSlotID, GetMediaDescr().getAsConstPropertyValueList(), aDialogParams, NULL ); const SfxPoolItem* pItem = NULL; if ( bPreselectPassword && aDialogParams.GetItemState( SID_ENCRYPTIONDATA, true, &pItem ) != SfxItemState::SET ) { // the file dialog preselects the password checkbox if the provided mediadescriptor has encryption data entry // after dialog execution the password interaction flag will be either removed or not aDialogParams.Put( SfxBoolItem( SID_PASSWORDINTERACTION, true ) ); } // aStringTypeFN is a pure output parameter, pDialogParams is an in/out parameter OUString aStringTypeFN; if ( pFileDlg->Execute( pDialogParams, aStringTypeFN ) != ERRCODE_NONE ) { throw task::ErrorCodeIOException( "ModelData_Impl::OutputFileDialog: ERRCODE_IO_ABORT", uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); } OUString aFilterName = aStringTypeFN; // the following two arguments can not be converted in MediaDescriptor, // so they should be removed from the ItemSet after retrieving SFX_ITEMSET_ARG( pDialogParams, pRecommendReadOnly, SfxBoolItem, SID_RECOMMENDREADONLY, false ); m_bRecommendReadOnly = ( pRecommendReadOnly && pRecommendReadOnly->GetValue() ); pDialogParams->ClearItem( SID_RECOMMENDREADONLY ); uno::Sequence< beans::PropertyValue > aPropsFromDialog; TransformItems( nSlotID, *pDialogParams, aPropsFromDialog, NULL ); GetMediaDescr() << aPropsFromDialog; // get the path from the dialog INetURLObject aURL( pFileDlg->GetPath() ); // the path should be provided outside since it might be used for further calls to the dialog aSuggestedName = aURL.GetName( INetURLObject::DECODE_WITH_CHARSET ); aSuggestedDir = pFileDlg->GetDisplayDirectory(); // old filter options should be cleared in case different filter is used OUString aFilterFromMediaDescr = GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() ); OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() ); const OUString sFilterOptionsString(aFilterOptionsString); const OUString sFilterDataString(aFilterDataString); if ( aFilterName.equals( aFilterFromMediaDescr ) ) { // preserv current settings if any // if there no current settings and the name is the same // as old filter name use old filter settings if ( aFilterFromMediaDescr.equals( aOldFilterName ) ) { ::comphelper::SequenceAsHashMap::const_iterator aIter = GetDocProps().find( sFilterOptionsString ); if ( aIter != GetDocProps().end() && GetMediaDescr().find( sFilterOptionsString ) == GetMediaDescr().end() ) GetMediaDescr()[aIter->first] = aIter->second; aIter = GetDocProps().find( sFilterDataString ); if ( aIter != GetDocProps().end() && GetMediaDescr().find( sFilterDataString ) == GetMediaDescr().end() ) GetMediaDescr()[aIter->first] = aIter->second; } } else { GetMediaDescr().erase( sFilterDataString ); GetMediaDescr().erase( sFilterOptionsString ); if ( aFilterName.equals( aOldFilterName ) ) { // merge filter option of the document filter ::comphelper::SequenceAsHashMap::const_iterator aIter = GetDocProps().find( sFilterOptionsString ); if ( aIter != GetDocProps().end() ) GetMediaDescr()[aIter->first] = aIter->second; aIter = GetDocProps().find( sFilterDataString ); if ( aIter != GetDocProps().end() ) GetMediaDescr()[aIter->first] = aIter->second; } } uno::Reference< ui::dialogs::XFilePickerControlAccess > xExtFileDlg( pFileDlg->GetFilePicker(), uno::UNO_QUERY ); if ( xExtFileDlg.is() ) { if ( SfxStoringHelper::CheckFilterOptionsAppearence( m_pOwner->GetFilterConfiguration(), aFilterName ) ) bUseFilterOptions = true; if ( ( !( nStoreMode & EXPORT_REQUESTED ) || ( nStoreMode & WIDEEXPORT_REQUESTED ) ) && bUseFilterOptions ) { try { // for exporters: always show dialog if format uses options // for save: show dialog if format uses options and no options given or if forced by user uno::Any aVal = xExtFileDlg->getValue( ui::dialogs::ExtendedFilePickerElementIds::CHECKBOX_FILTEROPTIONS, 0 ); aVal >>= bUseFilterOptions; if ( !bUseFilterOptions ) bUseFilterOptions = ( GetMediaDescr().find( sFilterDataString ) == GetMediaDescr().end() && GetMediaDescr().find( sFilterOptionsString ) == GetMediaDescr().end() ); } catch( const lang::IllegalArgumentException& ) {} } } // merge in results of the dialog execution GetMediaDescr()[OUString("URL")] <<= OUString( aURL.GetMainURL( INetURLObject::NO_DECODE )); GetMediaDescr()[sFilterNameString] <<= aFilterName; return bUseFilterOptions; } bool ModelData_Impl::ShowDocumentInfoDialog() { bool bDialogUsed = false; try { uno::Reference< frame::XController > xController = GetModel()->getCurrentController(); if ( xController.is() ) { uno::Reference< frame::XDispatchProvider > xFrameDispatch( xController->getFrame(), uno::UNO_QUERY ); if ( xFrameDispatch.is() ) { util::URL aURL; aURL.Complete = ".uno:SetDocumentProperties"; uno::Reference < util::XURLTransformer > xTransformer( util::URLTransformer::create( comphelper::getProcessComponentContext() ) ); if ( xTransformer->parseStrict( aURL ) ) { uno::Reference< frame::XDispatch > xDispatch = xFrameDispatch->queryDispatch( aURL, OUString("_self"), 0 ); if ( xDispatch.is() ) { xDispatch->dispatch( aURL, uno::Sequence< beans::PropertyValue >() ); bDialogUsed = true; } } } } } catch ( const uno::Exception& ) { } return bDialogUsed; } OUString ModelData_Impl::GetRecommendedDir( const OUString& aSuggestedDir ) { OUString aRecommendedDir; if ( ( !aSuggestedDir.isEmpty() || GetStorable()->hasLocation() ) && !GetMediaDescr().getUnpackedValueOrDefault("RepairPackage", sal_False ) ) { INetURLObject aLocation; if ( !aSuggestedDir.isEmpty() ) aLocation = INetURLObject( aSuggestedDir ); else { OUString aOldURL = GetStorable()->getLocation(); if ( !aOldURL.isEmpty() ) { INetURLObject aTmp( aOldURL ); if ( aTmp.removeSegment() ) aLocation = aTmp; } if ( aLocation.HasError() ) aLocation = INetURLObject( SvtPathOptions().GetWorkPath() ); } aLocation.setFinalSlash(); if ( !aLocation.HasError() ) aRecommendedDir = aLocation.GetMainURL( INetURLObject::NO_DECODE ); } else { aRecommendedDir = INetURLObject( SvtPathOptions().GetWorkPath() ).GetMainURL( INetURLObject::NO_DECODE ); } return aRecommendedDir; } OUString ModelData_Impl::GetRecommendedName( const OUString& aSuggestedName, const OUString& aTypeName ) { // the last used name might be provided by aSuggestedName from the old selection, or from the MediaDescriptor OUString aRecommendedName; if ( !aSuggestedName.isEmpty() ) aRecommendedName = aSuggestedName; else { aRecommendedName = INetURLObject( GetStorable()->getLocation() ).GetName( INetURLObject::DECODE_WITH_CHARSET ); if ( aRecommendedName.isEmpty() ) { try { uno::Reference< frame::XTitle > xTitle( GetModel(), uno::UNO_QUERY_THROW ); aRecommendedName = xTitle->getTitle(); } catch( const uno::Exception& ) {} } if ( !aRecommendedName.isEmpty() && !aTypeName.isEmpty() ) { // adjust the extension to the type uno::Reference< container::XNameAccess > xTypeDetection = uno::Reference< container::XNameAccess >( comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.TypeDetection"), uno::UNO_QUERY ); if ( xTypeDetection.is() ) { INetURLObject aObj( OUString( "c:/" ) + aRecommendedName, INET_PROT_FILE, INetURLObject::ENCODE_ALL, RTL_TEXTENCODING_UTF8, INetURLObject::FSYS_DOS ); uno::Sequence< beans::PropertyValue > aTypeNameProps; if ( ( xTypeDetection->getByName( aTypeName ) >>= aTypeNameProps ) && aTypeNameProps.getLength() ) { ::comphelper::SequenceAsHashMap aTypeNamePropsHM( aTypeNameProps ); uno::Sequence< OUString > aExtensions = aTypeNamePropsHM.getUnpackedValueOrDefault( OUString("Extensions"), ::uno::Sequence< OUString >() ); if ( aExtensions.getLength() ) aObj.SetExtension( aExtensions[0] ); } aRecommendedName = aObj.GetName( INetURLObject::DECODE_WITH_CHARSET, RTL_TEXTENCODING_UTF8 ); } } } return aRecommendedName; } // class SfxStoringHelper SfxStoringHelper::SfxStoringHelper() { } uno::Reference< container::XNameAccess > SfxStoringHelper::GetFilterConfiguration() { if ( !m_xFilterCFG.is() ) { m_xFilterCFG = uno::Reference< container::XNameAccess >( comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.FilterFactory"), uno::UNO_QUERY ); if ( !m_xFilterCFG.is() ) throw uno::RuntimeException(); } return m_xFilterCFG; } uno::Reference< container::XContainerQuery > SfxStoringHelper::GetFilterQuery() { if ( !m_xFilterQuery.is() ) { m_xFilterQuery = uno::Reference< container::XContainerQuery >( GetFilterConfiguration(), uno::UNO_QUERY ); if ( !m_xFilterQuery.is() ) throw uno::RuntimeException(); } return m_xFilterQuery; } uno::Reference< ::com::sun::star::frame::XModuleManager2 > SfxStoringHelper::GetModuleManager() { if ( !m_xModuleManager.is() ) { m_xModuleManager = frame::ModuleManager::create( comphelper::getProcessComponentContext() ); } return m_xModuleManager; } bool SfxStoringHelper::GUIStoreModel( uno::Reference< frame::XModel > xModel, const OUString& aSlotName, uno::Sequence< beans::PropertyValue >& aArgsSequence, bool bPreselectPassword, const OUString& _aSuggestedName, sal_uInt16 nDocumentSignatureState ) { OUString aSuggestedName = _aSuggestedName; ModelData_Impl aModelData( *this, xModel, aArgsSequence ); bool bDialogUsed = false; INetURLObject aURL; bool bSetStandardName = false; // can be set only for SaveAs // parse the slot name sal_Int8 nStoreMode = getStoreModeFromSlotName( aSlotName ); sal_Int8 nStatusSave = STATUS_NO_ACTION; ::comphelper::SequenceAsHashMap::const_iterator aSaveACopyIter = aModelData.GetMediaDescr().find( ::rtl::OUString("SaveACopy") ); if ( aSaveACopyIter != aModelData.GetMediaDescr().end() ) { bool bSaveACopy = false; aSaveACopyIter->second >>= bSaveACopy; if ( bSaveACopy ) nStoreMode = EXPORT_REQUESTED | SAVEACOPY_REQUESTED | WIDEEXPORT_REQUESTED; } // handle the special cases if ( nStoreMode & SAVEAS_REQUESTED ) { ::comphelper::SequenceAsHashMap::const_iterator aSaveToIter = aModelData.GetMediaDescr().find( OUString("SaveTo") ); if ( aSaveToIter != aModelData.GetMediaDescr().end() ) { bool bWideExport = false; aSaveToIter->second >>= bWideExport; if ( bWideExport ) nStoreMode = EXPORT_REQUESTED | WIDEEXPORT_REQUESTED; } // if saving is not acceptable the warning must be shown even in case of SaveAs operation if ( ( nStoreMode & SAVEAS_REQUESTED ) && aModelData.CheckSaveAcceptable( STATUS_SAVEAS ) == STATUS_NO_ACTION ) throw task::ErrorCodeIOException( "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); } else if ( nStoreMode & SAVE_REQUESTED ) { // if saving is not acceptable by the configuration the warning must be shown nStatusSave = aModelData.CheckSaveAcceptable( STATUS_SAVE ); if ( nStatusSave == STATUS_NO_ACTION ) throw task::ErrorCodeIOException( "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); else if ( nStatusSave == STATUS_SAVE ) { // check whether it is possible to use save operation nStatusSave = aModelData.CheckStateForSave(); } if ( nStatusSave == STATUS_NO_ACTION ) { throw task::ErrorCodeIOException( "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); } else if ( nStatusSave != STATUS_SAVE ) { // this should be a usual SaveAs operation nStoreMode = SAVEAS_REQUESTED; if ( nStatusSave == STATUS_SAVEAS_STANDARDNAME ) bSetStandardName = true; } } if ( !( nStoreMode & EXPORT_REQUESTED ) ) { // if it is no export, warn user that the signature will be removed if ( SIGNATURESTATE_SIGNATURES_OK == nDocumentSignatureState || SIGNATURESTATE_SIGNATURES_INVALID == nDocumentSignatureState || SIGNATURESTATE_SIGNATURES_NOTVALIDATED == nDocumentSignatureState || SIGNATURESTATE_SIGNATURES_PARTIAL_OK == nDocumentSignatureState) { if (MessageDialog(NULL, SfxResId(RID_SVXSTR_XMLSEC_QUERY_LOSINGSIGNATURE), VCL_MESSAGE_QUESTION, VCL_BUTTONS_YES_NO).Execute() != RET_YES) { // the user has decided not to store the document throw task::ErrorCodeIOException( "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); } } } if ( nStoreMode & SAVE_REQUESTED && nStatusSave == STATUS_SAVE ) { // Document properties can contain streams that should be freed before storing aModelData.FreeDocumentProps(); if ( aModelData.GetStorable2().is() ) { try { aModelData.GetStorable2()->storeSelf( aModelData.GetMediaDescr().getAsConstPropertyValueList() ); } catch (const lang::IllegalArgumentException& e) { SAL_WARN("sfx", "Ignoring parameters! " "ModelData considers this illegal: " << e.Message); aModelData.GetStorable()->store(); } } else { OSL_FAIL( "XStorable2 is not supported by the model!\n" ); aModelData.GetStorable()->store(); } return false; } // preselect a filter for the storing process uno::Sequence< beans::PropertyValue > aFilterProps = aModelData.GetPreselectedFilter_Impl( nStoreMode ); DBG_ASSERT( aFilterProps.getLength(), "No filter for storing!\n" ); if ( !aFilterProps.getLength() ) throw task::ErrorCodeIOException( "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_INVALIDPARAMETER", uno::Reference< uno::XInterface >(), ERRCODE_IO_INVALIDPARAMETER); ::comphelper::SequenceAsHashMap aFilterPropsHM( aFilterProps ); OUString aFilterName = aFilterPropsHM.getUnpackedValueOrDefault( OUString("Name"), OUString() ); const OUString sFilterNameString(aFilterNameString); OUString aFilterFromMediaDescr = aModelData.GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() ); OUString aOldFilterName = aModelData.GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() ); bool bUseFilterOptions = false; ::comphelper::SequenceAsHashMap::const_iterator aFileNameIter = aModelData.GetMediaDescr().find( OUString("URL") ); const OUString sFilterOptionsString(aFilterOptionsString); const OUString sFilterDataString(aFilterDataString); const OUString sFilterFlagsString(aFilterFlagsString); if ( ( nStoreMode & EXPORT_REQUESTED ) && ( nStoreMode & PDFEXPORT_REQUESTED ) && !( nStoreMode & PDFDIRECTEXPORT_REQUESTED ) ) { // this is PDF export, the filter options dialog should be shown before the export aModelData.GetMediaDescr()[sFilterNameString] <<= aFilterName; if ( aModelData.GetMediaDescr().find( sFilterFlagsString ) == aModelData.GetMediaDescr().end() && aModelData.GetMediaDescr().find( sFilterOptionsString ) == aModelData.GetMediaDescr().end() && aModelData.GetMediaDescr().find( sFilterDataString ) == aModelData.GetMediaDescr().end() ) { // execute filter options dialog since no options are set in the media descriptor if ( aModelData.ExecuteFilterDialog_Impl( aFilterName ) ) bDialogUsed = true; } } if ( aFileNameIter == aModelData.GetMediaDescr().end() ) { sal_Int16 nDialog = SFX2_IMPL_DIALOG_CONFIG; ::comphelper::SequenceAsHashMap::const_iterator aDlgIter = aModelData.GetMediaDescr().find( OUString("UseSystemDialog") ); if ( aDlgIter != aModelData.GetMediaDescr().end() ) { bool bUseSystemDialog = true; if ( aDlgIter->second >>= bUseSystemDialog ) { if ( bUseSystemDialog ) nDialog = SFX2_IMPL_DIALOG_SYSTEM; else nDialog = SFX2_IMPL_DIALOG_OOO; } } // The Dispatch supports parameter FolderName that overwrites SuggestedSaveAsDir OUString aSuggestedDir = aModelData.GetMediaDescr().getUnpackedValueOrDefault("FolderName", OUString() ); if ( aSuggestedDir.isEmpty() ) { aSuggestedDir = aModelData.GetMediaDescr().getUnpackedValueOrDefault("SuggestedSaveAsDir", OUString() ); if ( aSuggestedDir.isEmpty() ) aSuggestedDir = aModelData.GetDocProps().getUnpackedValueOrDefault("SuggestedSaveAsDir", OUString() ); } aSuggestedName = aModelData.GetMediaDescr().getUnpackedValueOrDefault("SuggestedSaveAsName", OUString() ); if ( aSuggestedName.isEmpty() ) aSuggestedName = aModelData.GetDocProps().getUnpackedValueOrDefault("SuggestedSaveAsName", OUString() ); OUString sStandardDir; ::comphelper::SequenceAsHashMap::const_iterator aStdDirIter = aModelData.GetMediaDescr().find( OUString("StandardDir") ); if ( aStdDirIter != aModelData.GetMediaDescr().end() ) aStdDirIter->second >>= sStandardDir; ::com::sun::star::uno::Sequence< OUString > aBlackList; ::comphelper::SequenceAsHashMap::const_iterator aBlackListIter = aModelData.GetMediaDescr().find( OUString("BlackList") ); if ( aBlackListIter != aModelData.GetMediaDescr().end() ) aBlackListIter->second >>= aBlackList; bool bExit = false; while ( !bExit ) { // in case the dialog is opened a second time the folder should be the same as previously navigated to by the user, not what was handed over by initial parameters bUseFilterOptions = aModelData.OutputFileDialog( nStoreMode, aFilterProps, bSetStandardName, aSuggestedName, bPreselectPassword, aSuggestedDir, nDialog, sStandardDir, aBlackList ); if ( nStoreMode == SAVEAS_REQUESTED ) { // in case of saving check filter for possible alien warning OUString aSelFilterName = aModelData.GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() ); sal_Int8 nStatusFilterSave = aModelData.CheckFilter( aSelFilterName ); if ( nStatusFilterSave == STATUS_SAVEAS_STANDARDNAME ) { // switch to best filter bSetStandardName = true; } else if ( nStatusFilterSave == STATUS_SAVE ) { // user confirmed alien filter or "good" filter is used bExit = true; } } else bExit = true; } bDialogUsed = true; aFileNameIter = aModelData.GetMediaDescr().find( OUString("URL") ); } else { // the target file name is provided so check if new filter options // are provided or old options can be used if ( aFilterFromMediaDescr.equals( aOldFilterName ) ) { ::comphelper::SequenceAsHashMap::const_iterator aIter = aModelData.GetDocProps().find( sFilterOptionsString ); if ( aIter != aModelData.GetDocProps().end() && aModelData.GetMediaDescr().find( sFilterOptionsString ) == aModelData.GetMediaDescr().end() ) aModelData.GetMediaDescr()[aIter->first] = aIter->second; aIter = aModelData.GetDocProps().find( sFilterDataString ); if ( aIter != aModelData.GetDocProps().end() && aModelData.GetMediaDescr().find( sFilterDataString ) == aModelData.GetMediaDescr().end() ) aModelData.GetMediaDescr()[aIter->first] = aIter->second; } } if ( aFileNameIter != aModelData.GetMediaDescr().end() ) { OUString aFileName; aFileNameIter->second >>= aFileName; aURL.SetURL( aFileName ); DBG_ASSERT( aURL.GetProtocol() != INET_PROT_NOT_VALID, "Illegal URL!" ); ::comphelper::SequenceAsHashMap::const_iterator aIter = aModelData.GetMediaDescr().find( sFilterNameString ); if ( aIter != aModelData.GetMediaDescr().end() ) aIter->second >>= aFilterName; else aModelData.GetMediaDescr()[sFilterNameString] <<= aFilterName; DBG_ASSERT( !aFilterName.isEmpty(), "Illegal filter!" ); } else { DBG_ASSERT( false, "This code must be unreachable!\n" ); throw task::ErrorCodeIOException( "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_INVALIDPARAMETER", uno::Reference< uno::XInterface >(), ERRCODE_IO_INVALIDPARAMETER); } ::comphelper::SequenceAsHashMap::const_iterator aIter = aModelData.GetMediaDescr().find( OUString("FilterFlags") ); bool bFilterFlagsSet = ( aIter != aModelData.GetMediaDescr().end() ); if( !( nStoreMode & PDFEXPORT_REQUESTED ) && !bFilterFlagsSet && ( ( nStoreMode & EXPORT_REQUESTED ) || bUseFilterOptions ) ) { // execute filter options dialog if ( aModelData.ExecuteFilterDialog_Impl( aFilterName ) ) bDialogUsed = true; } // so the arguments will not change any more and can be stored to the main location aArgsSequence = aModelData.GetMediaDescr().getAsConstPropertyValueList(); // store the document and handle it's docinfo SvtSaveOptions aOptions; DocumentSettingsGuard aSettingsGuard( aModelData.GetModel(), aModelData.IsRecommendReadOnly(), nStoreMode & EXPORT_REQUESTED ); OSL_ENSURE( aModelData.GetMediaDescr().find( OUString( "Password" ) ) == aModelData.GetMediaDescr().end(), "The Password property of MediaDescriptor should not be used here!" ); if ( aOptions.IsDocInfoSave() && ( !aModelData.GetStorable()->hasLocation() || INetURLObject( aModelData.GetStorable()->getLocation() ) != aURL ) ) { // this is defenitly not a Save operation // so the document info can be updated // on export document info must be preserved uno::Reference xDPS( aModelData.GetModel(), uno::UNO_QUERY_THROW); uno::Reference xCloneable( xDPS->getDocumentProperties(), uno::UNO_QUERY_THROW); uno::Reference xOldDocProps( xCloneable->createClone(), uno::UNO_QUERY_THROW); // use dispatch API to show document info dialog if ( aModelData.ShowDocumentInfoDialog() ) bDialogUsed = true; else { OSL_FAIL( "Can't execute document info dialog!\n" ); } try { // Document properties can contain streams that should be freed before storing aModelData.FreeDocumentProps(); if ( nStoreMode & EXPORT_REQUESTED ) aModelData.GetStorable()->storeToURL( aURL.GetMainURL( INetURLObject::NO_DECODE ), aArgsSequence ); else aModelData.GetStorable()->storeAsURL( aURL.GetMainURL( INetURLObject::NO_DECODE ), aArgsSequence ); } catch( const uno::Exception& ) { if ( nStoreMode & EXPORT_REQUESTED ) { SetDocInfoState(aModelData.GetModel(), xOldDocProps, true); } throw; } if ( nStoreMode & EXPORT_REQUESTED ) { SetDocInfoState(aModelData.GetModel(), xOldDocProps, true); } } else { // Document properties can contain streams that should be freed before storing aModelData.FreeDocumentProps(); // this is actually a save operation with different parameters // so storeTo or storeAs without DocInfo operations are used if ( nStoreMode & EXPORT_REQUESTED ) aModelData.GetStorable()->storeToURL( aURL.GetMainURL( INetURLObject::NO_DECODE ), aArgsSequence ); else aModelData.GetStorable()->storeAsURL( aURL.GetMainURL( INetURLObject::NO_DECODE ), aArgsSequence ); } // Launch PDF viewer if ( nStoreMode & PDFEXPORT_REQUESTED ) { FilterConfigItem aItem( "Office.Common/Filter/PDF/Export/" ); bool aViewPDF = aItem.ReadBool( "ViewPDFAfterExport", false ); if ( aViewPDF ) { uno::Reference xSystemShellExecute(SystemShellExecute::create( ::comphelper::getProcessComponentContext() ) ); xSystemShellExecute->execute( aURL.GetMainURL( INetURLObject::NO_DECODE ), "", SystemShellExecuteFlags::URIS_ONLY ); } } return bDialogUsed; } // static bool SfxStoringHelper::CheckFilterOptionsAppearence( const uno::Reference< container::XNameAccess >& xFilterCFG, const OUString& aFilterName ) { bool bUseFilterOptions = false; DBG_ASSERT( xFilterCFG.is(), "No filter configuration!\n" ); if( xFilterCFG.is() ) { try { uno::Sequence < beans::PropertyValue > aProps; uno::Any aAny = xFilterCFG->getByName( aFilterName ); if ( aAny >>= aProps ) { ::comphelper::SequenceAsHashMap aPropsHM( aProps ); OUString aServiceName = aPropsHM.getUnpackedValueOrDefault( OUString("UIComponent"), OUString() ); if( !aServiceName.isEmpty() ) bUseFilterOptions = true; } } catch( const uno::Exception& ) { } } return bUseFilterOptions; } // static void SfxStoringHelper::SetDocInfoState( const uno::Reference< frame::XModel >& xModel, const uno::Reference< document::XDocumentProperties>& i_xOldDocProps, bool bNoModify ) { uno::Reference const xModelDocPropsSupplier(xModel, uno::UNO_QUERY_THROW); uno::Reference const xDocPropsToFill = xModelDocPropsSupplier->getDocumentProperties(); uno::Reference< beans::XPropertySet > const xPropSet( i_xOldDocProps->getUserDefinedProperties(), uno::UNO_QUERY_THROW); uno::Reference< util::XModifiable > xModifiable( xModel, uno::UNO_QUERY ); if ( bNoModify && !xModifiable.is() ) throw uno::RuntimeException(); bool bIsModified = bNoModify && xModifiable->isModified(); try { uno::Reference< beans::XPropertySet > const xSet( xDocPropsToFill->getUserDefinedProperties(), uno::UNO_QUERY); uno::Reference< beans::XPropertyContainer > xContainer( xSet, uno::UNO_QUERY ); uno::Reference< beans::XPropertySetInfo > xSetInfo = xSet->getPropertySetInfo(); uno::Sequence< beans::Property > lProps = xSetInfo->getProperties(); const beans::Property* pProps = lProps.getConstArray(); sal_Int32 c = lProps.getLength(); sal_Int32 i = 0; for (i=0; igetPropertyValue( pProps[i].Name ); if ( pProps[i].Attributes & ::com::sun::star::beans::PropertyAttribute::REMOVABLE ) { try { // QUESTION: DefaultValue?! xContainer->addProperty( pProps[i].Name, pProps[i].Attributes, aValue ); } catch (beans::PropertyExistException const&) {} try { // it is possible that the propertysets from XML and binary files differ; we shouldn't break then xSet->setPropertyValue( pProps[i].Name, aValue ); } catch ( const uno::Exception& ) {} } } // sigh... have to set these manually i'm afraid... wonder why // SfxObjectShell doesn't handle this internally, should be easier xDocPropsToFill->setAuthor(i_xOldDocProps->getAuthor()); xDocPropsToFill->setGenerator(i_xOldDocProps->getGenerator()); xDocPropsToFill->setCreationDate(i_xOldDocProps->getCreationDate()); xDocPropsToFill->setTitle(i_xOldDocProps->getTitle()); xDocPropsToFill->setSubject(i_xOldDocProps->getSubject()); xDocPropsToFill->setDescription(i_xOldDocProps->getDescription()); xDocPropsToFill->setKeywords(i_xOldDocProps->getKeywords()); xDocPropsToFill->setModifiedBy(i_xOldDocProps->getModifiedBy()); xDocPropsToFill->setModificationDate(i_xOldDocProps->getModificationDate()); xDocPropsToFill->setPrintedBy(i_xOldDocProps->getPrintedBy()); xDocPropsToFill->setPrintDate(i_xOldDocProps->getPrintDate()); xDocPropsToFill->setAutoloadURL(i_xOldDocProps->getAutoloadURL()); xDocPropsToFill->setAutoloadSecs(i_xOldDocProps->getAutoloadSecs()); xDocPropsToFill->setDefaultTarget(i_xOldDocProps->getDefaultTarget()); xDocPropsToFill->setEditingCycles(i_xOldDocProps->getEditingCycles()); xDocPropsToFill->setEditingDuration(i_xOldDocProps->getEditingDuration()); // other attributes e.g. DocumentStatistics are not editable from dialog } catch (const uno::Exception& e) { SAL_INFO("sfx.doc", "SetDocInfoState: caught exception: " << e.Message); } // set the modified flag back if required if ( ((bNoModify && bIsModified) ? 1 : 0) != xModifiable->isModified() ) xModifiable->setModified( bIsModified ); } // static bool SfxStoringHelper::WarnUnacceptableFormat( const uno::Reference< frame::XModel >& xModel, const OUString& aOldUIName, const OUString& /*aDefUIName*/, bool /*bCanProceedFurther*/ ) { if ( !SvtSaveOptions().IsWarnAlienFormat() ) return true; vcl::Window* pWin = SfxStoringHelper::GetModelWindow( xModel ); SfxAlienWarningDialog aDlg( pWin, aOldUIName ); return aDlg.Execute() == RET_OK; } vcl::Window* SfxStoringHelper::GetModelWindow( const uno::Reference< frame::XModel >& xModel ) { vcl::Window* pWin = 0; try { if ( xModel.is() ) { uno::Reference< frame::XController > xController = xModel->getCurrentController(); if ( xController.is() ) { uno::Reference< frame::XFrame > xFrame = xController->getFrame(); if ( xFrame.is() ) { uno::Reference< awt::XWindow > xWindow = xFrame->getContainerWindow(); if ( xWindow.is() ) { VCLXWindow* pVCLWindow = VCLXWindow::GetImplementation( xWindow ); if ( pVCLWindow ) pWin = pVCLWindow->GetWindow(); } } } } } catch ( const uno::Exception& ) { } return pWin; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */