/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include "sdmodeltestbase.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace ::com::sun::star; /// Impress miscellaneous tests. class SdMiscTest : public SdUnoApiTestXml { public: SdMiscTest() : SdUnoApiTestXml("/sd/qa/unit/data/") { } void testTdf99396(); void testTableObjectUndoTest(); void testFillGradient(); void testTdf44774(); void testTdf38225(); void testTdf101242_ODF_no_settings(); void testTdf101242_ODF_add_settings(); void testTdf101242_settings_keep(); void testTdf101242_settings_remove(); void testTdf119392(); void testTdf67248(); void testTdf119956(); void testTdf120527(); void testTextColumns(); void testTdf98839_ShearVFlipH(); void testTdf130988(); void testTdf131033(); void testTdf129898LayerDrawnInSlideshow(); void testTdf136956(); CPPUNIT_TEST_SUITE(SdMiscTest); CPPUNIT_TEST(testTdf99396); CPPUNIT_TEST(testTableObjectUndoTest); CPPUNIT_TEST(testFillGradient); CPPUNIT_TEST(testTdf44774); CPPUNIT_TEST(testTdf38225); CPPUNIT_TEST(testTdf101242_ODF_no_settings); CPPUNIT_TEST(testTdf101242_ODF_add_settings); CPPUNIT_TEST(testTdf101242_settings_keep); CPPUNIT_TEST(testTdf101242_settings_remove); CPPUNIT_TEST(testTdf119392); CPPUNIT_TEST(testTdf67248); CPPUNIT_TEST(testTdf119956); CPPUNIT_TEST(testTdf120527); CPPUNIT_TEST(testTextColumns); CPPUNIT_TEST(testTdf98839_ShearVFlipH); CPPUNIT_TEST(testTdf130988); CPPUNIT_TEST(testTdf131033); CPPUNIT_TEST(testTdf129898LayerDrawnInSlideshow); CPPUNIT_TEST(testTdf136956); CPPUNIT_TEST_SUITE_END(); virtual void registerNamespaces(xmlXPathContextPtr& pXmlXPathCtx) override { XmlTestTools::registerODFNamespaces(pXmlXPathCtx); } }; void SdMiscTest::testTdf99396() { // Load the document and select the table. loadFromURL(u"tdf99396.odp"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); SdPage* pPage = pViewShell->GetActualPage(); SdrObject* pObject = pPage->GetObj(0); SdrView* pView = pViewShell->GetView(); pView->MarkObj(pObject, pView->GetSdrPageView()); SdDrawDocument* pDoc = pXImpressDocument->GetDoc(); // Make sure that the undo stack is empty. CPPUNIT_ASSERT_EQUAL(static_cast(0), pDoc->GetUndoManager()->GetUndoActionCount()); // Set the vertical alignment of the cells to bottom. sdr::table::SvxTableController* pTableController = dynamic_cast(pView->getSelectionController().get()); CPPUNIT_ASSERT(pTableController); SfxRequest aRequest(pViewShell->GetViewFrame(), SID_TABLE_VERT_BOTTOM); pTableController->Execute(aRequest); // This was 0, it wasn't possible to undo a vertical alignment change. CPPUNIT_ASSERT_EQUAL(static_cast(1), pDoc->GetUndoManager()->GetUndoActionCount()); } void SdMiscTest::testTableObjectUndoTest() { // See tdf#99396 for the issue // Load the document and select the table. loadFromURL(u"tdf99396.odp"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); SdPage* pPage = pViewShell->GetActualPage(); auto pTableObject = dynamic_cast(pPage->GetObj(0)); CPPUNIT_ASSERT(pTableObject); SdrView* pView = pViewShell->GetView(); pView->MarkObj(pTableObject, pView->GetSdrPageView()); SdDrawDocument* pDoc = pXImpressDocument->GetDoc(); // Make sure that the undo stack is empty. CPPUNIT_ASSERT_EQUAL(static_cast(0), pDoc->GetUndoManager()->GetUndoActionCount()); // Set horizontal and vertical adjustment during text edit. pView->SdrBeginTextEdit(pTableObject); CPPUNIT_ASSERT(pView->GetTextEditObject()); { SfxRequest aRequest(pViewShell->GetViewFrame(), SID_ATTR_PARA_ADJUST_RIGHT); SfxItemSet aEditAttr(pDoc->GetPool()); pView->GetAttributes(aEditAttr); SfxItemSet aNewAttr(*(aEditAttr.GetPool()), aEditAttr.GetRanges()); aNewAttr.Put(SvxAdjustItem(SvxAdjust::Right, EE_PARA_JUST)); aRequest.Done(aNewAttr); const SfxItemSet* pArgs = aRequest.GetArgs(); pView->SetAttributes(*pArgs); } const auto& pLocalUndoManager = pView->getViewLocalUndoManager(); CPPUNIT_ASSERT_EQUAL(size_t(1), pLocalUndoManager->GetUndoActionCount()); CPPUNIT_ASSERT_EQUAL(OUString("Apply attributes"), pLocalUndoManager->GetUndoActionComment()); { auto pTableController = dynamic_cast(pView->getSelectionController().get()); CPPUNIT_ASSERT(pTableController); SfxRequest aRequest(pViewShell->GetViewFrame(), SID_TABLE_VERT_BOTTOM); pTableController->Execute(aRequest); } // Global change "Format cell" is applied only - Change the vertical alignment to "Bottom" CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetUndoManager()->GetUndoActionCount()); CPPUNIT_ASSERT_EQUAL(OUString("Format cell"), pDoc->GetUndoManager()->GetUndoActionComment()); pView->SdrEndTextEdit(); // End of text edit, so the text edit action is added to the undo stack CPPUNIT_ASSERT_EQUAL(size_t(2), pDoc->GetUndoManager()->GetUndoActionCount()); CPPUNIT_ASSERT_EQUAL(OUString("Edit text of Table"), pDoc->GetUndoManager()->GetUndoActionComment(0)); CPPUNIT_ASSERT_EQUAL(OUString("Format cell"), pDoc->GetUndoManager()->GetUndoActionComment(1)); // Check that the result is what we expect. { uno::Reference xTable = pTableObject->getTable(); uno::Reference xCell(xTable->getCellByPosition(0, 0), uno::UNO_QUERY); drawing::TextVerticalAdjust eAdjust = xCell->getPropertyValue("TextVerticalAdjust").get(); CPPUNIT_ASSERT_EQUAL(int(drawing::TextVerticalAdjust_BOTTOM), static_cast(eAdjust)); } { const EditTextObject& rEdit = pTableObject->getText(0)->GetOutlinerParaObject()->GetTextObject(); const SfxItemSet& rParaAttribs = rEdit.GetParaAttribs(0); auto pAdjust = rParaAttribs.GetItem(EE_PARA_JUST); CPPUNIT_ASSERT_EQUAL(SvxAdjust::Right, pAdjust->GetAdjust()); } // Now undo. pXImpressDocument->GetDocShell()->GetUndoManager()->Undo(); // Undoing the last action - one left CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetUndoManager()->GetUndoActionCount()); CPPUNIT_ASSERT_EQUAL(OUString("Format cell"), pDoc->GetUndoManager()->GetUndoActionComment(0)); // Check again that the result is what we expect. { uno::Reference xTable = pTableObject->getTable(); uno::Reference xCell(xTable->getCellByPosition(0, 0), uno::UNO_QUERY); drawing::TextVerticalAdjust eAdjust = xCell->getPropertyValue("TextVerticalAdjust").get(); // This failed: Undo() did not change it from drawing::TextVerticalAdjust_BOTTOM. CPPUNIT_ASSERT_EQUAL(int(drawing::TextVerticalAdjust_TOP), static_cast(eAdjust)); } { const EditTextObject& rEdit = pTableObject->getText(0)->GetOutlinerParaObject()->GetTextObject(); const SfxItemSet& rParaAttribs = rEdit.GetParaAttribs(0); auto pAdjust = rParaAttribs.GetItem(EE_PARA_JUST); CPPUNIT_ASSERT_EQUAL(SvxAdjust::Center, pAdjust->GetAdjust()); } Scheduler::ProcessEventsToIdle(); CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetUndoManager()->GetUndoActionCount()); CPPUNIT_ASSERT_EQUAL(OUString("Format cell"), pDoc->GetUndoManager()->GetUndoActionComment(0)); /* * now test tdf#103950 - Undo does not revert bundled font size changes for table cells */ pTableObject = dynamic_cast(pPage->GetObj(0)); pView->MarkObj(pTableObject, pView->GetSdrPageView()); // select table { SfxRequest aRequest(pViewShell->GetViewFrame(), SID_GROW_FONT_SIZE); static_cast(pViewShell)->ExecChar(aRequest); } Scheduler::ProcessEventsToIdle(); CPPUNIT_ASSERT_EQUAL(static_cast(3), pDoc->GetUndoManager()->GetUndoActionCount()); CPPUNIT_ASSERT_EQUAL(OUString("Apply attributes to Table"), pDoc->GetUndoManager()->GetUndoActionComment(0)); CPPUNIT_ASSERT_EQUAL(OUString("Grow font size"), pDoc->GetUndoManager()->GetUndoActionComment(1)); CPPUNIT_ASSERT_EQUAL(OUString("Format cell"), pDoc->GetUndoManager()->GetUndoActionComment(2)); } void SdMiscTest::testFillGradient() { mxComponent = loadFromDesktop("private:factory/simpress"); uno::Reference xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xDrawPages = xDrawPagesSupplier->getDrawPages(); // Insert a new page. uno::Reference xDrawPage(xDrawPages->insertNewByIndex(0), uno::UNO_SET_THROW); uno::Reference xShapes(xDrawPage, uno::UNO_QUERY_THROW); // Create a rectangle uno::Reference xFactory(mxComponent, uno::UNO_QUERY); CPPUNIT_ASSERT(xFactory.is()); uno::Reference xShape1( xFactory->createInstance("com.sun.star.drawing.RectangleShape"), uno::UNO_QUERY_THROW); uno::Reference xPropSet(xShape1, uno::UNO_QUERY_THROW); // Set FillStyle and FillGradient awt::Gradient aGradient; aGradient.StartColor = sal_Int32(Color(255, 0, 0)); aGradient.EndColor = sal_Int32(Color(0, 255, 0)); xPropSet->setPropertyValue("FillStyle", uno::Any(drawing::FillStyle_GRADIENT)); xPropSet->setPropertyValue("FillGradient", uno::Any(aGradient)); // Add the rectangle to the page. xShapes->add(xShape1); // Retrieve the shape and check FillStyle and FillGradient uno::Reference xIndexAccess(xDrawPage, uno::UNO_QUERY_THROW); uno::Reference xPropSet2(xIndexAccess->getByIndex(0), uno::UNO_QUERY_THROW); drawing::FillStyle eFillStyle; awt::Gradient aGradient2; CPPUNIT_ASSERT(xPropSet2->getPropertyValue("FillStyle") >>= eFillStyle); CPPUNIT_ASSERT_EQUAL(int(drawing::FillStyle_GRADIENT), static_cast(eFillStyle)); CPPUNIT_ASSERT(xPropSet2->getPropertyValue("FillGradient") >>= aGradient2); CPPUNIT_ASSERT_EQUAL(sal_Int32(Color(255, 0, 0)), aGradient2.StartColor); CPPUNIT_ASSERT_EQUAL(sal_Int32(Color(0, 255, 0)), aGradient2.EndColor); } void SdMiscTest::testTdf44774() { mxComponent = loadFromDesktop("private:factory/sdraw"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); sd::DrawDocShell* pDocShell = pXImpressDocument->GetDocShell(); SfxStyleSheetBasePool* pSSPool = pDocShell->GetStyleSheetPool(); // Create a new style with an empty name, like what happens in UI when creating a new style SfxStyleSheetBase& rStyleA = pSSPool->Make("", SfxStyleFamily::Para, SfxStyleSearchBits::UserDefined); // Assign a new name, which does not yet set its ApiName rStyleA.SetName("StyleA"); // Create another style SfxStyleSheetBase& rStyleB = pSSPool->Make("StyleB", SfxStyleFamily::Para, SfxStyleSearchBits::UserDefined); // ... and set its parent to the first one rStyleB.SetParent("StyleA"); // Now save the file and reload saveAndReload("draw8"); pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); pDocShell = pXImpressDocument->GetDocShell(); pSSPool = pDocShell->GetStyleSheetPool(); SfxStyleSheetBase* pStyle = pSSPool->Find("StyleB", SfxStyleFamily::Para); CPPUNIT_ASSERT(pStyle); // The parent set in StyleB used to reset, because parent style's msApiName was empty CPPUNIT_ASSERT_EQUAL(OUString("StyleA"), pStyle->GetParent()); } void SdMiscTest::testTdf38225() { mxComponent = loadFromDesktop("private:factory/simpress"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); sd::DrawDocShell* pDocShell = pXImpressDocument->GetDocShell(); SfxStyleSheetBasePool* pSSPool = pDocShell->GetStyleSheetPool(); // Create a new style with a name pSSPool->Make("StyleWithName1", SfxStyleFamily::Para, SfxStyleSearchBits::UserDefined); // Now save the file and reload saveAndReload("draw8"); pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); pDocShell = pXImpressDocument->GetDocShell(); pSSPool = pDocShell->GetStyleSheetPool(); SfxStyleSheetBase* pStyle = pSSPool->Find("StyleWithName1", SfxStyleFamily::Para); CPPUNIT_ASSERT(pStyle); // Rename the style CPPUNIT_ASSERT(pStyle->SetName("StyleWithName2")); // Save the file and reload again saveAndReload("draw8"); pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); pDocShell = pXImpressDocument->GetDocShell(); pSSPool = pDocShell->GetStyleSheetPool(); // The problem was that the style kept the old name upon reloading pStyle = pSSPool->Find("StyleWithName1", SfxStyleFamily::Para); CPPUNIT_ASSERT(!pStyle); pStyle = pSSPool->Find("StyleWithName2", SfxStyleFamily::Para); CPPUNIT_ASSERT(pStyle); } void SdMiscTest::testTdf120527() { mxComponent = loadFromDesktop("private:factory/simpress"); // Load a bitmap into the bitmap table. uno::Reference xFactory(mxComponent, uno::UNO_QUERY); CPPUNIT_ASSERT(xFactory.is()); uno::Reference xBitmaps( xFactory->createInstance("com.sun.star.drawing.BitmapTable"), uno::UNO_QUERY); CPPUNIT_ASSERT(xBitmaps.is()); OUString aGraphicURL = createFileURL(u"tdf120527.jpg"); xBitmaps->insertByName("test", uno::Any(aGraphicURL)); // Create a graphic. uno::Reference xShape( xFactory->createInstance("com.sun.star.drawing.GraphicObjectShape"), uno::UNO_QUERY); CPPUNIT_ASSERT(xShape.is()); uno::Reference xShapeProperySet(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT(xShapeProperySet.is()); xShapeProperySet->setPropertyValue("GraphicURL", xBitmaps->getByName("test")); // Insert it. uno::Reference xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); CPPUNIT_ASSERT(xDrawPagesSupplier.is()); uno::Reference xDrawPages = xDrawPagesSupplier->getDrawPages(); CPPUNIT_ASSERT(xDrawPages.is()); uno::Reference xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT(xDrawPage.is()); // This failed with a lang.IllegalArgumentException. xDrawPage->add(xShape); // Verify that the graphic was actually consumed. uno::Reference xGraphic; xShapeProperySet->getPropertyValue("Graphic") >>= xGraphic; CPPUNIT_ASSERT(xGraphic.is()); } // Testing document model part of editengine-columns void SdMiscTest::testTextColumns() { mxComponent = loadFromDesktop("private:factory/simpress"); uno::Reference xDrawPagesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xDrawPages = xDrawPagesSupplier->getDrawPages(); // Insert a new page. uno::Reference xDrawPage(xDrawPages->insertNewByIndex(0), uno::UNO_SET_THROW); uno::Reference xShapes(xDrawPage, uno::UNO_QUERY_THROW); { // Create a text shape uno::Reference xFactory(mxComponent, uno::UNO_QUERY); CPPUNIT_ASSERT(xFactory.is()); uno::Reference xShape( xFactory->createInstance("com.sun.star.drawing.TextShape"), uno::UNO_QUERY_THROW); uno::Reference xPropSet(xShape, uno::UNO_QUERY_THROW); // Add the shape to the page. xShapes->add(xShape); // Set up columns auto pTextObj = DynCastSdrTextObj(SdrObject::getSdrObjectFromXShape(xShape)); CPPUNIT_ASSERT(pTextObj); pTextObj->SetMergedItem(SfxInt16Item(SDRATTR_TEXTCOLUMNS_NUMBER, 2)); pTextObj->SetMergedItem(SdrMetricItem(SDRATTR_TEXTCOLUMNS_SPACING, 1000)); } { // Retrieve the shape and check columns uno::Reference xIndexAccess(xDrawPage, uno::UNO_QUERY_THROW); uno::Reference xShape(xIndexAccess->getByIndex(0), uno::UNO_QUERY_THROW); auto pTextObj = DynCastSdrTextObj(SdrObject::getSdrObjectFromXShape(xShape)); CPPUNIT_ASSERT(pTextObj); CPPUNIT_ASSERT_EQUAL(sal_Int16(2), pTextObj->GetTextColumnsNumber()); CPPUNIT_ASSERT_EQUAL(sal_Int32(1000), pTextObj->GetTextColumnsSpacing()); } } /// Draw miscellaneous tests. // Since LO 6.2 the visible/printable/locked information for layers is always // written as ODF attributes draw:display and draw:protected. It is only read from // there, if the config items VisibleLayers, PrintableLayers and LockedLayers do // not exist. The user option WriteLayerStateAsConfigItem can be set to 'true' to // write these config items in addition to the ODF attributes for to produce // documents for older LO versions or Apache OpenOffice. With value 'false' no // config items are written. The 'testTdf101242_xyz' tests combine source // files with and without config items with option values 'true' and 'false'. void SdMiscTest::testTdf101242_ODF_add_settings() { // Loads a document, which has the visible/printable/locked information for layers // only in the ODF attributes draw:display and draw:protected. The resaved document // should still have the ODF attributes and in addition the config items in settings.xml. // "Load" is needed for to handle layers, simple "loadURL" does not work. loadFromURL(u"tdf101242_ODF.odg"); // Saving including items in settings.xml std::shared_ptr pBatch( comphelper::ConfigurationChanges::create()); officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(true, pBatch); pBatch->commit(); utl::TempFileNamed aTempFile = save("draw8"); // Verify, that the saved document still has the ODF attributes xmlDocUniquePtr pXmlDoc = parseExport(aTempFile, "styles.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc); const OString sPathStart( "/office:document-styles/office:master-styles/draw:layer-set/draw:layer"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']"); // Verify, that the saved document has got the items in settings.xml xmlDocUniquePtr pXmlDoc2 = parseExport(aTempFile, "settings.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2); const OString sPathStart2("/office:document-settings/office:settings/" "config:config-item-set[@config:name='ooo:view-settings']/" "config:config-item-map-indexed[@config:name='Views']/" "config:config-item-map-entry"); // Value is a bitfield with first Byte in order '* * * measurelines controls backgroundobjects background layout' // The first three bits depend on initialization and may change. The values in file are Base64 encoded. OUString sBase64; uno::Sequence aDecodedSeq; sBase64 = getXPathContent(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='VisibleLayers']"); CPPUNIT_ASSERT_MESSAGE("Item VisibleLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x0F, static_cast(aDecodedSeq[0]) & 0x1F); sBase64 = getXPathContent(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='PrintableLayers']"); CPPUNIT_ASSERT_MESSAGE("Item PrintableLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x17, static_cast(aDecodedSeq[0]) & 0x1F); sBase64 = getXPathContent(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='LockedLayers']"); CPPUNIT_ASSERT_MESSAGE("Item LockedLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x04, static_cast(aDecodedSeq[0]) & 0x1F); } void SdMiscTest::testTdf101242_ODF_no_settings() { // Loads a document, which has the visible/printable/locked information for layers // only in the ODF attributes draw:display and draw:protected. The resave document // should have only the ODF attributes and no config items in settings.xml. loadFromURL(u"tdf101242_ODF.odg"); // Saving without items in settings.xml std::shared_ptr pBatch( comphelper::ConfigurationChanges::create()); officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(false, pBatch); pBatch->commit(); utl::TempFileNamed aTempFile = save("draw8"); // Verify, that the saved document still has the ODF attributes xmlDocUniquePtr pXmlDoc = parseExport(aTempFile, "styles.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc); const OString sPathStart( "/office:document-styles/office:master-styles/draw:layer-set/draw:layer"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']"); // Verify, that the saved document has no layer items in settings.xml xmlDocUniquePtr pXmlDoc2 = parseExport(aTempFile, "settings.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2); const OString sPathStart2("/office:document-settings/office:settings/" "config:config-item-set[@config:name='ooo:view-settings']/" "config:config-item-map-indexed[@config:name='Views']/" "config:config-item-map-entry"); xmlXPathObjectPtr pXmlObj = getXPathNode(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='VisibleLayers']"); CPPUNIT_ASSERT_EQUAL(0, xmlXPathNodeSetGetLength(pXmlObj->nodesetval)); xmlXPathFreeObject(pXmlObj); pXmlObj = getXPathNode(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='PrintableLayers']"); CPPUNIT_ASSERT_EQUAL(0, xmlXPathNodeSetGetLength(pXmlObj->nodesetval)); xmlXPathFreeObject(pXmlObj); pXmlObj = getXPathNode(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='LockedLayers']"); CPPUNIT_ASSERT_EQUAL(0, xmlXPathNodeSetGetLength(pXmlObj->nodesetval)); xmlXPathFreeObject(pXmlObj); } void SdMiscTest::testTdf101242_settings_keep() { // Loads a document, which has the visible/printable/locked information for layers // only in the config items in settings.xml. That is the case for all old documents. // The resaved document should have the ODF attributes draw:display and draw:protected // and should still have these config items in settings.xml. loadFromURL(u"tdf101242_settings.odg"); // Saving including items in settings.xml std::shared_ptr pBatch( comphelper::ConfigurationChanges::create()); officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(true, pBatch); pBatch->commit(); utl::TempFileNamed aTempFile = save("draw8"); // Verify, that the saved document has the ODF attributes xmlDocUniquePtr pXmlDoc = parseExport(aTempFile, "styles.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc); const OString sPathStart( "/office:document-styles/office:master-styles/draw:layer-set/draw:layer"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']"); // Verify, that the saved document still has the items in settings.xml xmlDocUniquePtr pXmlDoc2 = parseExport(aTempFile, "settings.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2); const OString sPathStart2("/office:document-settings/office:settings/" "config:config-item-set[@config:name='ooo:view-settings']/" "config:config-item-map-indexed[@config:name='Views']/" "config:config-item-map-entry"); // Value is a bitfield with first Byte in order '* * * measurelines controls backgroundobjects background layout' // The first three bits depend on initialization and may change. The values in file are Base64 encoded. OUString sBase64; uno::Sequence aDecodedSeq; sBase64 = getXPathContent(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='VisibleLayers']"); CPPUNIT_ASSERT_MESSAGE("Item VisibleLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x0F, static_cast(aDecodedSeq[0]) & 0x1F); sBase64 = getXPathContent(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='PrintableLayers']"); CPPUNIT_ASSERT_MESSAGE("Item PrintableLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x17, static_cast(aDecodedSeq[0]) & 0x1F); sBase64 = getXPathContent(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='LockedLayers']"); CPPUNIT_ASSERT_MESSAGE("Item LockedLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x04, static_cast(aDecodedSeq[0]) & 0x1F); } void SdMiscTest::testTdf101242_settings_remove() { // Loads a document, which has the visible/printable/locked information for layers // only in the config items in settings.xml. That is the case for all old documents. // The resaved document should have only the ODF attributes draw:display and draw:protected // and should have no config items in settings.xml. loadFromURL(u"tdf101242_settings.odg"); // Saving without config items in settings.xml std::shared_ptr pBatch( comphelper::ConfigurationChanges::create()); officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(false, pBatch); pBatch->commit(); utl::TempFileNamed aTempFile = save("draw8"); // Verify, that the saved document has the ODF attributes xmlDocUniquePtr pXmlDoc = parseExport(aTempFile, "styles.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc); const OString sPathStart( "/office:document-styles/office:master-styles/draw:layer-set/draw:layer"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']"); assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']"); // Verify, that the saved document has no layer items in settings.xml xmlDocUniquePtr pXmlDoc2 = parseExport(aTempFile, "settings.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2); const OString sPathStart2("/office:document-settings/office:settings/" "config:config-item-set[@config:name='ooo:view-settings']/" "config:config-item-map-indexed[@config:name='Views']/" "config:config-item-map-entry"); xmlXPathObjectPtr pXmlObj = getXPathNode(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='VisibleLayers']"); CPPUNIT_ASSERT_EQUAL(0, xmlXPathNodeSetGetLength(pXmlObj->nodesetval)); xmlXPathFreeObject(pXmlObj); pXmlObj = getXPathNode(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='PrintableLayers']"); CPPUNIT_ASSERT_EQUAL(0, xmlXPathNodeSetGetLength(pXmlObj->nodesetval)); xmlXPathFreeObject(pXmlObj); pXmlObj = getXPathNode(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='LockedLayers']"); CPPUNIT_ASSERT_EQUAL(0, xmlXPathNodeSetGetLength(pXmlObj->nodesetval)); xmlXPathFreeObject(pXmlObj); } void SdMiscTest::testTdf119392() { // Loads a document which has two user layers "V--" and "V-L". Inserts a new layer "-P-" between them. // Checks, that the bitfields in the saved file have the bits in the correct order, in case // option WriteLayerAsConfigItem is true and the config items are written. std::shared_ptr batch( comphelper::ConfigurationChanges::create()); officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(true, batch); batch->commit(); loadFromURL(u"tdf119392_InsertLayer.odg"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); // Insert layer "-P-", not visible, printable, not locked sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); SdrView* pView = pViewShell->GetView(); pView->InsertNewLayer("-P-", 6); // 0..4 standard layer, 5 layer "V--" SdrPageView* pPageView = pView->GetSdrPageView(); pPageView->SetLayerVisible("-P-", false); pPageView->SetLayerPrintable("-P-", true); pPageView->SetLayerLocked("-P-", false); utl::TempFileNamed aTempFile = save("draw8"); // Verify correct bit order in bitfield in the config items in settings.xml xmlDocUniquePtr pXmlDoc = parseExport(aTempFile, "settings.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc); const OString sPathStart("/office:document-settings/office:settings/" "config:config-item-set[@config:name='ooo:view-settings']/" "config:config-item-map-indexed[@config:name='Views']/" "config:config-item-map-entry"); // First Byte is in order 'V-L -P- V-- measurelines controls backgroundobjects background layout' // Bits need to be: visible=10111111=0xbf=191 printable=01011111=0x5f=95 locked=10000000=0x80=128 // The values in file are Base64 encoded. OUString sBase64; uno::Sequence aDecodedSeq; sBase64 = getXPathContent(pXmlDoc, sPathStart + "/config:config-item[@config:name='VisibleLayers']"); CPPUNIT_ASSERT_MESSAGE("Item VisibleLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0xbF, static_cast(aDecodedSeq[0]) & 0xff); // & 0xff forces unambiguous types for CPPUNIT_ASSERT_EQUAL sBase64 = getXPathContent(pXmlDoc, sPathStart + "/config:config-item[@config:name='PrintableLayers']"); CPPUNIT_ASSERT_MESSAGE("Item PrintableLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x5f, static_cast(aDecodedSeq[0]) & 0xff); sBase64 = getXPathContent(pXmlDoc, sPathStart + "/config:config-item[@config:name='LockedLayers']"); CPPUNIT_ASSERT_MESSAGE("Item LockedLayers does not exists.", !sBase64.isEmpty()); comphelper::Base64::decode(aDecodedSeq, sBase64); CPPUNIT_ASSERT_EQUAL(0x80, static_cast(aDecodedSeq[0]) & 0xff); } void SdMiscTest::testTdf67248() { // The document tdf67248.odg has been created with a German UI. It has a user layer named "Background". // On opening the user layer must still exists. The error was, that it was merged into the standard // layer "background". loadFromURL(u"tdf67248.odg"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); SdDrawDocument* pDoc = pXImpressDocument->GetDoc(); SdrLayerAdmin& rLayerAdmin = pDoc->GetLayerAdmin(); CPPUNIT_ASSERT_EQUAL(sal_uInt16(6), rLayerAdmin.GetLayerCount()); } void SdMiscTest::testTdf119956() { loadFromURL(u"tdf119956.odg"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); sd::GraphicViewShell* pGraphicViewShell = static_cast(pViewShell); CPPUNIT_ASSERT(pGraphicViewShell); sd::LayerTabBar* pLayerTabBar = pGraphicViewShell->GetLayerTabControl(); CPPUNIT_ASSERT(pLayerTabBar); pLayerTabBar->StateChanged(StateChangedType::InitShow); // Alt+Click sets a tab in edit mode, so that you can rename it. // The error was, that Alt+Click on a tab, which was not the current tab, did not set the clicked tab // as current tab. As a result, the entered text was applied to the wrong tab. // The test document has the layer tabs "layout", "controls", "measurelines" and "Layer4" in this order // The "pagePos" is 0, 1, 2, 3 // Make sure, that tab "layout" is the current tab. MouseEvent aSyntheticMouseEvent; if (pLayerTabBar->GetCurPagePos() != 0) { sal_uInt16 nIdOfTabPos0(pLayerTabBar->GetPageId(0)); tools::Rectangle aTabPos0Rect(pLayerTabBar->GetPageRect(nIdOfTabPos0)); aSyntheticMouseEvent = MouseEvent(aTabPos0Rect.Center(), 1, MouseEventModifiers::SYNTHETIC, MOUSE_LEFT, 0); pLayerTabBar->MouseButtonDown(aSyntheticMouseEvent); } CPPUNIT_ASSERT_EQUAL(sal_uInt16(0), pLayerTabBar->GetCurPagePos()); // Alt+Click on tab "Layer4" sal_uInt16 nIdOfTabPos3(pLayerTabBar->GetPageId(3)); tools::Rectangle aTabPos3Rect(pLayerTabBar->GetPageRect(nIdOfTabPos3)); aSyntheticMouseEvent = MouseEvent(aTabPos3Rect.Center(), 1, MouseEventModifiers::SYNTHETIC, MOUSE_LEFT, KEY_MOD2); pLayerTabBar->MouseButtonDown(aSyntheticMouseEvent); // Make sure, tab 3 is current tab now. CPPUNIT_ASSERT_EQUAL(sal_uInt16(3), pLayerTabBar->GetCurPagePos()); } void SdMiscTest::testTdf98839_ShearVFlipH() { // Loads a document with a sheared shape and mirrors it loadFromURL(u"tdf98839_ShearVFlipH.odg"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); SdPage* pPage = pViewShell->GetActualPage(); SdrObjCustomShape* pShape = static_cast(pPage->GetObj(0)); pShape->Mirror(Point(4000, 2000), Point(4000, 10000)); // Save and examine attribute draw:transform utl::TempFileNamed aTempFile = save("draw8"); xmlDocUniquePtr pXmlDoc = parseExport(aTempFile, "content.xml"); CPPUNIT_ASSERT_MESSAGE("Failed to get 'content.xml'", pXmlDoc); const OString sPathStart("/office:document-content/office:body/office:drawing/draw:page"); assertXPath(pXmlDoc, sPathStart); const OUString sTransform = getXPath(pXmlDoc, sPathStart + "/draw:custom-shape", "transform"); // Error was, that the shear angle had a wrong sign. CPPUNIT_ASSERT_MESSAGE("expected: draw:transform='skewX (-0.64350...)", sTransform.startsWith("skewX (-")); } void SdMiscTest::testTdf130988() { loadFromURL(u"tdf130988_3D_create_lathe.odg"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); //emulate command .uno:ConvertInto3DLathe sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); E3dView* pView = pViewShell->GetView(); pView->MarkNextObj(); pView->ConvertMarkedObjTo3D(false, basegfx::B2DPoint(8000.0, -3000.0), basegfx::B2DPoint(3000.0, -8000.0)); E3dScene* pObj = dynamic_cast(pView->GetMarkedObjectByIndex(0)); CPPUNIT_ASSERT(pObj); // Error was, that the created 3D object had a wrong path. Instead examining // the path directly, I use the scene distance, because that is easier. The // scene distance is calculated from the object while creating. const double fDistance = pObj->GetDistance(); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("D3DSceneDistance", 7071.0, fDistance, 0.5); } void SdMiscTest::testTdf131033() { loadFromURL(u"tdf131033_3D_SceneSizeIn2d.odg"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); // The document contains a polygon, so that emulate command .uno:ConvertInto3DLathe // by direct call of ConvertMarkedObjTo3D works. // It produces a rotation around a vertical axis, which is far away from the // generating shape. sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); E3dView* pView = pViewShell->GetView(); pView->MarkNextObj(); pView->ConvertMarkedObjTo3D(false, basegfx::B2DPoint(11000.0, -5000.0), basegfx::B2DPoint(11000.0, -9000.0)); E3dScene* pObj = dynamic_cast(pView->GetMarkedObjectByIndex(0)); CPPUNIT_ASSERT(pObj); // Error was, that the 2D representation of the scene did not contain the default 20° // rotation of the new scene around x-axis and therefore was not high enough. const double fSnapRectHeight = pObj->GetSnapRect().getOpenHeight(); CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("2D height", 7096.0, fSnapRectHeight, 1.0); } void SdMiscTest::testTdf129898LayerDrawnInSlideshow() { // Versions LO 6.2 to 6.4 have produced files, where the layer DrawnInSlideshow has // got visible=false and printable=false attributes. Those files should be repaired now. loadFromURL(u"tdf129898_faulty_DrawnInSlideshow.odp"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); SdDrawDocument* pDoc = pXImpressDocument->GetDoc(); // Verify model static const OUStringLiteral sName = u"DrawnInSlideshow"; SdrLayerAdmin& rLayerAdmin = pDoc->GetLayerAdmin(); SdrLayer* pLayer = rLayerAdmin.GetLayer(sName); CPPUNIT_ASSERT_MESSAGE("No layer DrawnInSlideshow", pLayer); CPPUNIT_ASSERT(pLayer->IsVisibleODF()); CPPUNIT_ASSERT(pLayer->IsPrintableODF()); // Verify view sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell(); SdrPageView* pPageView = pViewShell->GetView()->GetSdrPageView(); CPPUNIT_ASSERT(pPageView->IsLayerVisible(sName)); CPPUNIT_ASSERT(pPageView->IsLayerPrintable(sName)); } void SdMiscTest::testTdf136956() { loadFromURL(u"odp/cellspan.odp"); SdXImpressDocument* pXImpressDocument = dynamic_cast(mxComponent.get()); CPPUNIT_ASSERT(pXImpressDocument); SdDrawDocument* pDoc = pXImpressDocument->GetDoc(); const SdrPage* pPage = pDoc->GetPage(1); sdr::table::SdrTableObj* pTableObj = dynamic_cast(pPage->GetObj(0)); CPPUNIT_ASSERT(pTableObj); uno::Reference xTable(pTableObj->getTable(), uno::UNO_SET_THROW); uno::Reference xRange( xTable->createCursorByRange(xTable->getCellRangeByPosition(0, 0, 3, 2)), uno::UNO_QUERY_THROW); // 4x3 Table before merge. CPPUNIT_ASSERT_EQUAL(sal_Int32(4), xTable->getColumnCount()); CPPUNIT_ASSERT_EQUAL(sal_Int32(3), xTable->getRowCount()); xRange->merge(); // 1x1 Table after merge. CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xTable->getColumnCount()); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xTable->getRowCount()); pXImpressDocument->GetDocShell()->GetUndoManager()->Undo(); // 4x3 Table after undo. Undo crashed before. CPPUNIT_ASSERT_EQUAL(sal_Int32(4), xTable->getColumnCount()); CPPUNIT_ASSERT_EQUAL(sal_Int32(3), xTable->getRowCount()); } CPPUNIT_TEST_SUITE_REGISTRATION(SdMiscTest); CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */