/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include "scitems.hxx" #include #include #include #include #include #include #include #include #include "tabview.hxx" #include "tabvwsh.hxx" #include "docsh.hxx" #include "gridwin.hxx" #include "olinewin.hxx" #include "colrowba.hxx" #include "tabcont.hxx" #include "scmod.hxx" #include "uiitems.hxx" #include "sc.hrc" #include "viewutil.hxx" #include "editutil.hxx" #include "inputhdl.hxx" #include "inputwin.hxx" #include "validat.hxx" #include "hintwin.hxx" #include "inputopt.hxx" #include "rfindlst.hxx" #include "hiranges.hxx" #include "viewuno.hxx" #include "chartarr.hxx" #include "anyrefdg.hxx" #include "dpobject.hxx" #include "patattr.hxx" #include "dociter.hxx" #include "seltrans.hxx" #include "fillinfo.hxx" #include "AccessibilityHints.hxx" #include "rangeutl.hxx" #include "client.hxx" #include "tabprotection.hxx" #include "markdata.hxx" #include #include namespace { ScRange lcl_getSubRangeByIndex( const ScRange& rRange, sal_Int32 nIndex ) { ScAddress aResult( rRange.aStart ); SCCOL nWidth = rRange.aEnd.Col() - rRange.aStart.Col() + 1; SCROW nHeight = rRange.aEnd.Row() - rRange.aStart.Row() + 1; SCTAB nDepth = rRange.aEnd.Tab() - rRange.aStart.Tab() + 1; if( (nWidth > 0) && (nHeight > 0) && (nDepth > 0) ) { // row by row from first to last sheet sal_Int32 nArea = nWidth * nHeight; aResult.IncCol( static_cast< SCsCOL >( nIndex % nWidth ) ); aResult.IncRow( static_cast< SCsROW >( (nIndex % nArea) / nWidth ) ); aResult.IncTab( static_cast< SCsTAB >( nIndex / nArea ) ); if( !rRange.In( aResult ) ) aResult = rRange.aStart; } return ScRange( aResult ); } } // anonymous namespace using namespace com::sun::star; // --- public functions void ScTabView::ClickCursor( SCCOL nPosX, SCROW nPosY, bool bControl ) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); pDoc->SkipOverlapped(nPosX, nPosY, nTab); bool bRefMode = SC_MOD()->IsFormulaMode(); if ( bRefMode ) { DoneRefMode(); if (bControl) SC_MOD()->AddRefEntry(); InitRefMode( nPosX, nPosY, nTab, SC_REFTYPE_REF ); } else { DoneBlockMode( bControl ); aViewData.ResetOldCursor(); SetCursor( (SCCOL) nPosX, (SCROW) nPosY ); } } void ScTabView::UpdateAutoFillMark() { // single selection or cursor ScRange aMarkRange; bool bMarked = (aViewData.GetSimpleArea( aMarkRange ) == SC_MARK_SIMPLE); sal_uInt16 i; for (i=0; i<4; i++) if (pGridWin[i] && pGridWin[i]->IsVisible()) pGridWin[i]->UpdateAutoFillMark( bMarked, aMarkRange ); for (i=0; i<2; i++) { if (pColBar[i] && pColBar[i]->IsVisible()) pColBar[i]->SetMark( bMarked, aMarkRange.aStart.Col(), aMarkRange.aEnd.Col() ); if (pRowBar[i] && pRowBar[i]->IsVisible()) pRowBar[i]->SetMark( bMarked, aMarkRange.aStart.Row(), aMarkRange.aEnd.Row() ); } // selection transfer object is checked together with AutoFill marks, // because it has the same requirement of a single continuous block. CheckSelectionTransfer(); // update selection transfer object } void ScTabView::FakeButtonUp( ScSplitPos eWhich ) { if (pGridWin[eWhich]) pGridWin[eWhich]->FakeButtonUp(); } void ScTabView::HideAllCursors() { for (sal_uInt16 i=0; i<4; i++) if (pGridWin[i]) if (pGridWin[i]->IsVisible()) { vcl::Cursor* pCur = pGridWin[i]->GetCursor(); if (pCur) if (pCur->IsVisible()) pCur->Hide(); pGridWin[i]->HideCursor(); } } void ScTabView::ShowAllCursors() { for (sal_uInt16 i=0; i<4; i++) if (pGridWin[i]) if (pGridWin[i]->IsVisible()) { pGridWin[i]->ShowCursor(); // #114409# pGridWin[i]->CursorChanged(); } } void ScTabView::ShowCursor() { pGridWin[aViewData.GetActivePart()]->ShowCursor(); // #114409# pGridWin[aViewData.GetActivePart()]->CursorChanged(); } void ScTabView::InvalidateAttribs() { SfxBindings& rBindings = aViewData.GetBindings(); rBindings.Invalidate( SID_STYLE_APPLY ); rBindings.Invalidate( SID_STYLE_FAMILY2 ); // StarCalc knows only paragraph- or cell format templates rBindings.Invalidate( SID_ATTR_CHAR_FONT ); rBindings.Invalidate( SID_ATTR_CHAR_FONTHEIGHT ); rBindings.Invalidate( SID_ATTR_CHAR_COLOR ); rBindings.Invalidate( SID_ATTR_CHAR_WEIGHT ); rBindings.Invalidate( SID_ATTR_CHAR_POSTURE ); rBindings.Invalidate( SID_ATTR_CHAR_UNDERLINE ); rBindings.Invalidate( SID_ULINE_VAL_NONE ); rBindings.Invalidate( SID_ULINE_VAL_SINGLE ); rBindings.Invalidate( SID_ULINE_VAL_DOUBLE ); rBindings.Invalidate( SID_ULINE_VAL_DOTTED ); rBindings.Invalidate( SID_ATTR_CHAR_OVERLINE ); rBindings.Invalidate( SID_ATTR_CHAR_KERNING ); rBindings.Invalidate( SID_SET_SUPER_SCRIPT ); rBindings.Invalidate( SID_SET_SUB_SCRIPT ); rBindings.Invalidate( SID_ATTR_CHAR_STRIKEOUT ); rBindings.Invalidate( SID_ATTR_CHAR_SHADOWED ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_LEFT ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_RIGHT ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_BLOCK ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_CENTER); rBindings.Invalidate( SID_NUMBER_TYPE_FORMAT); rBindings.Invalidate( SID_ALIGNLEFT ); rBindings.Invalidate( SID_ALIGNRIGHT ); rBindings.Invalidate( SID_ALIGNBLOCK ); rBindings.Invalidate( SID_ALIGNCENTERHOR ); rBindings.Invalidate( SID_ALIGNTOP ); rBindings.Invalidate( SID_ALIGNBOTTOM ); rBindings.Invalidate( SID_ALIGNCENTERVER ); // stuff for sidebar panels { rBindings.Invalidate( SID_H_ALIGNCELL ); rBindings.Invalidate( SID_V_ALIGNCELL ); rBindings.Invalidate( SID_ATTR_ALIGN_INDENT ); rBindings.Invalidate( SID_FRAME_LINECOLOR ); rBindings.Invalidate( SID_FRAME_LINESTYLE ); rBindings.Invalidate( SID_ATTR_BORDER_OUTER ); rBindings.Invalidate( SID_ATTR_BORDER_INNER ); rBindings.Invalidate( SID_ATTR_BORDER_DIAG_TLBR ); rBindings.Invalidate( SID_ATTR_BORDER_DIAG_BLTR ); rBindings.Invalidate( SID_NUMBER_TYPE_FORMAT ); } rBindings.Invalidate( SID_BACKGROUND_COLOR ); rBindings.Invalidate( SID_ATTR_ALIGN_LINEBREAK ); rBindings.Invalidate( SID_NUMBER_FORMAT ); rBindings.Invalidate( SID_TEXTDIRECTION_LEFT_TO_RIGHT ); rBindings.Invalidate( SID_TEXTDIRECTION_TOP_TO_BOTTOM ); rBindings.Invalidate( SID_ATTR_PARA_LEFT_TO_RIGHT ); rBindings.Invalidate( SID_ATTR_PARA_RIGHT_TO_LEFT ); // pseudo slots for Format menu rBindings.Invalidate( SID_ALIGN_ANY_HDEFAULT ); rBindings.Invalidate( SID_ALIGN_ANY_LEFT ); rBindings.Invalidate( SID_ALIGN_ANY_HCENTER ); rBindings.Invalidate( SID_ALIGN_ANY_RIGHT ); rBindings.Invalidate( SID_ALIGN_ANY_JUSTIFIED ); rBindings.Invalidate( SID_ALIGN_ANY_VDEFAULT ); rBindings.Invalidate( SID_ALIGN_ANY_TOP ); rBindings.Invalidate( SID_ALIGN_ANY_VCENTER ); rBindings.Invalidate( SID_ALIGN_ANY_BOTTOM ); rBindings.Invalidate( SID_NUMBER_CURRENCY ); rBindings.Invalidate( SID_NUMBER_SCIENTIFIC ); rBindings.Invalidate( SID_NUMBER_DATE ); rBindings.Invalidate( SID_NUMBER_CURRENCY ); rBindings.Invalidate( SID_NUMBER_PERCENT ); rBindings.Invalidate( SID_NUMBER_TIME ); } // SetCursor - Cursor, set, draw, update InputWin // or send reference // without optimising due to BugId 29307 void ScTabView::SetCursor( SCCOL nPosX, SCROW nPosY, bool bNew ) { SCCOL nOldX = aViewData.GetCurX(); SCROW nOldY = aViewData.GetCurY(); // DeactivateIP only for MarkListHasChanged if ( nPosX != nOldX || nPosY != nOldY || bNew ) { ScTabViewShell* pViewShell = aViewData.GetViewShell(); bool bRefMode = pViewShell && pViewShell->IsRefInputMode(); if ( aViewData.HasEditView( aViewData.GetActivePart() ) && !bRefMode ) // 23259 or so { UpdateInputLine(); } HideAllCursors(); aViewData.SetCurX( nPosX ); aViewData.SetCurY( nPosY ); ShowAllCursors(); CursorPosChanged(); } } void ScTabView::CheckSelectionTransfer() { if ( aViewData.IsActive() ) // only for active view { ScModule* pScMod = SC_MOD(); ScSelectionTransferObj* pOld = pScMod->GetSelectionTransfer(); ScSelectionTransferObj* pNew = ScSelectionTransferObj::CreateFromView( this ); if ( pNew ) { // create new selection if (pOld) pOld->ForgetView(); uno::Reference xRef( pNew ); pScMod->SetSelectionTransfer( pNew ); pNew->CopyToSelection( GetActiveWin() ); // may delete pOld } else if ( pOld && pOld->GetView() == this ) { // remove own selection pOld->ForgetView(); pScMod->SetSelectionTransfer( NULL ); TransferableHelper::ClearSelection( GetActiveWin() ); // may delete pOld } // else: selection from outside: leave unchanged } } // update input row / menus // CursorPosChanged calls SelectionChanged // SelectionChanged calls CellContentChanged void ScTabView::CellContentChanged() { SfxBindings& rBindings = aViewData.GetBindings(); rBindings.Invalidate( SID_ATTR_SIZE ); // -> show error message rBindings.Invalidate( SID_THESAURUS ); rBindings.Invalidate( SID_HYPERLINK_GETLINK ); rBindings.Invalidate( SID_ROWCOL_SELCOUNT ); InvalidateAttribs(); // attribut updates aViewData.GetViewShell()->UpdateInputHandler(); } void ScTabView::SelectionChanged() { SfxViewFrame* pViewFrame = aViewData.GetViewShell()->GetViewFrame(); if (pViewFrame) { uno::Reference xController = pViewFrame->GetFrame().GetController(); if (xController.is()) { ScTabViewObj* pImp = ScTabViewObj::getImplementation( xController ); if (pImp) pImp->SelectionChanged(); } } UpdateAutoFillMark(); // also calls CheckSelectionTransfer SfxBindings& rBindings = aViewData.GetBindings(); rBindings.Invalidate( SID_CURRENTCELL ); // -> Navigator rBindings.Invalidate( SID_AUTO_FILTER ); // -> Menu rBindings.Invalidate( FID_NOTE_VISIBLE ); rBindings.Invalidate( FID_SHOW_NOTE ); rBindings.Invalidate( FID_HIDE_NOTE ); rBindings.Invalidate( SID_DELETE_NOTE ); rBindings.Invalidate( SID_ROWCOL_SELCOUNT ); // functions than may need to be disabled rBindings.Invalidate( FID_INS_ROWBRK ); rBindings.Invalidate( FID_INS_COLBRK ); rBindings.Invalidate( FID_DEL_ROWBRK ); rBindings.Invalidate( FID_DEL_COLBRK ); rBindings.Invalidate( FID_MERGE_ON ); rBindings.Invalidate( FID_MERGE_OFF ); rBindings.Invalidate( FID_MERGE_TOGGLE ); rBindings.Invalidate( SID_AUTOFILTER_HIDE ); rBindings.Invalidate( SID_UNFILTER ); rBindings.Invalidate( SID_REIMPORT_DATA ); rBindings.Invalidate( SID_REFRESH_DBAREA ); rBindings.Invalidate( SID_OUTLINE_SHOW ); rBindings.Invalidate( SID_OUTLINE_HIDE ); rBindings.Invalidate( SID_OUTLINE_REMOVE ); rBindings.Invalidate( FID_FILL_TO_BOTTOM ); rBindings.Invalidate( FID_FILL_TO_RIGHT ); rBindings.Invalidate( FID_FILL_TO_TOP ); rBindings.Invalidate( FID_FILL_TO_LEFT ); rBindings.Invalidate( FID_FILL_SERIES ); rBindings.Invalidate( SID_SCENARIOS ); rBindings.Invalidate( SID_AUTOFORMAT ); rBindings.Invalidate( SID_OPENDLG_TABOP ); rBindings.Invalidate( SID_DATA_SELECT ); rBindings.Invalidate( SID_CUT ); rBindings.Invalidate( SID_COPY ); rBindings.Invalidate( SID_PASTE ); rBindings.Invalidate( SID_PASTE_SPECIAL ); rBindings.Invalidate( FID_INS_ROW ); rBindings.Invalidate( FID_INS_COLUMN ); rBindings.Invalidate( FID_INS_ROWS_BEFORE ); rBindings.Invalidate( FID_INS_COLUMNS_BEFORE ); rBindings.Invalidate( FID_INS_ROWS_AFTER ); rBindings.Invalidate( FID_INS_COLUMNS_AFTER ); rBindings.Invalidate( FID_INS_CELL ); rBindings.Invalidate( FID_INS_CELLSDOWN ); rBindings.Invalidate( FID_INS_CELLSRIGHT ); rBindings.Invalidate( FID_CHG_COMMENT ); // only due to protect cell: rBindings.Invalidate( SID_CELL_FORMAT_RESET ); rBindings.Invalidate( SID_DELETE ); rBindings.Invalidate( SID_DELETE_CONTENTS ); rBindings.Invalidate( FID_DELETE_CELL ); rBindings.Invalidate( FID_CELL_FORMAT ); rBindings.Invalidate( SID_ENABLE_HYPHENATION ); rBindings.Invalidate( SID_INSERT_POSTIT ); rBindings.Invalidate( SID_CHARMAP ); rBindings.Invalidate( SID_OPENDLG_FUNCTION ); rBindings.Invalidate( FID_VALIDATION ); rBindings.Invalidate( SID_EXTERNAL_SOURCE ); rBindings.Invalidate( SID_TEXT_TO_COLUMNS ); rBindings.Invalidate( SID_SORT_ASCENDING ); rBindings.Invalidate( SID_SORT_DESCENDING ); if (aViewData.GetViewShell()->HasAccessibilityObjects()) aViewData.GetViewShell()->BroadcastAccessibility(SfxSimpleHint(SC_HINT_ACC_CURSORCHANGED)); CellContentChanged(); } void ScTabView::CursorPosChanged() { bool bRefMode = SC_MOD()->IsFormulaMode(); if ( !bRefMode ) // check that RefMode works when switching sheets aViewData.GetDocShell()->Broadcast( SfxSimpleHint( FID_KILLEDITVIEW ) ); // Broadcast, so that other Views of the document also switch ScDocument* pDoc = aViewData.GetDocument(); bool bDP = NULL != pDoc->GetDPAtCursor( aViewData.GetCurX(), aViewData.GetCurY(), aViewData.GetTabNo() ); aViewData.GetViewShell()->SetPivotShell(bDP); // UpdateInputHandler now in CellContentChanged SelectionChanged(); aViewData.SetTabStartCol( SC_TABSTART_NONE ); } namespace { Point calcHintWindowPosition( const Point& rCellPos, const Size& rCellSize, const Size& rFrameWndSize, const Size& rHintWndSize) { const long nMargin = 20; long nMLeft = rCellPos.X(); long nMRight = rFrameWndSize.Width() - rCellPos.X() - rCellSize.Width(); long nMTop = rCellPos.Y(); long nMBottom = rFrameWndSize.Height() - rCellPos.Y() - rCellSize.Height(); // First, see if we can fit the entire hint window in the visible region. if (nMRight - nMargin >= rHintWndSize.Width()) { // Right margin is wide enough. if (rFrameWndSize.Height() >= rHintWndSize.Height()) { // The frame has enough height. Take it. Point aPos = rCellPos; aPos.X() += rCellSize.Width() + nMargin; if (aPos.Y() + rHintWndSize.Height() > rFrameWndSize.Height()) { // Push the hint window up a bit to make it fit. aPos.Y() = rFrameWndSize.Height() - rHintWndSize.Height(); } return aPos; } } if (nMBottom - nMargin >= rHintWndSize.Height()) { // Bottom margin is high enough. if (rFrameWndSize.Width() >= rHintWndSize.Width()) { // The frame has enough width. Take it. Point aPos = rCellPos; aPos.Y() += rCellSize.Height() + nMargin; if (aPos.X() + rHintWndSize.Width() > rFrameWndSize.Width()) { // Move the hint window to the left to make it fit. aPos.X() = rFrameWndSize.Width() - rHintWndSize.Width(); } return aPos; } } if (nMLeft - nMargin >= rHintWndSize.Width()) { // Left margin is wide enough. if (rFrameWndSize.Height() >= rHintWndSize.Height()) { // The frame is high enough. Take it. Point aPos = rCellPos; aPos.X() -= rHintWndSize.Width() + nMargin; if (aPos.Y() + rHintWndSize.Height() > rFrameWndSize.Height()) { // Push the hint window up a bit to make it fit. aPos.Y() = rFrameWndSize.Height() - rHintWndSize.Height(); } return aPos; } } if (nMTop - nMargin >= rHintWndSize.Height()) { // Top margin is high enough. if (rFrameWndSize.Width() >= rHintWndSize.Width()) { // The frame is wide enough. Take it. Point aPos = rCellPos; aPos.Y() -= rHintWndSize.Height() + nMargin; if (aPos.X() + rHintWndSize.Width() > rFrameWndSize.Width()) { // Move the hint window to the left to make it fit. aPos.X() = rFrameWndSize.Width() - rHintWndSize.Width(); } return aPos; } } // The popup doesn't fit in any direction in its entirety. Do our best. if (nMRight - nMargin >= rHintWndSize.Width()) { // Right margin is good enough. Point aPos = rCellPos; aPos.X() += nMargin + rCellSize.Width(); aPos.Y() = 0; return aPos; } if (nMBottom - nMargin >= rHintWndSize.Height()) { // Bottom margin is good enough. Point aPos = rCellPos; aPos.Y() += nMargin + rCellSize.Height(); aPos.X() = 0; return aPos; } if (nMLeft - nMargin >= rHintWndSize.Width()) { // Left margin is good enough. Point aPos = rCellPos; aPos.X() -= rHintWndSize.Width() + nMargin; aPos.Y() = 0; return aPos; } if (nMTop - nMargin >= rHintWndSize.Height()) { // Top margin is good enough. Point aPos = rCellPos; aPos.Y() -= rHintWndSize.Height() + nMargin; aPos.X() = 0; return aPos; } // None of the above. Hopeless. At least try not to cover the current // cell. Point aPos = rCellPos; aPos.X() += rCellSize.Width(); return aPos; } } void ScTabView::TestHintWindow() { // show input help window and list drop-down button for validity bool bListValButton = false; ScAddress aListValPos; ScDocument* pDoc = aViewData.GetDocument(); const SfxUInt32Item* pItem = static_cast( pDoc->GetAttr( aViewData.GetCurX(), aViewData.GetCurY(), aViewData.GetTabNo(), ATTR_VALIDDATA )); if ( pItem->GetValue() ) { const ScValidationData* pData = pDoc->GetValidationEntry( pItem->GetValue() ); OSL_ENSURE(pData,"ValidationData not found"); OUString aTitle, aMessage; if ( pData && pData->GetInput( aTitle, aMessage ) && !aMessage.isEmpty() ) { //! check if on the same spot !!!! mpInputHintWindow.disposeAndClear(); ScSplitPos eWhich = aViewData.GetActivePart(); ScGridWindow* pWin = pGridWin[eWhich]; SCCOL nCol = aViewData.GetCurX(); SCROW nRow = aViewData.GetCurY(); Point aPos = aViewData.GetScrPos( nCol, nRow, eWhich ); Size aWinSize = pWin->GetOutputSizePixel(); // cursor visible? if ( nCol >= aViewData.GetPosX(WhichH(eWhich)) && nRow >= aViewData.GetPosY(WhichV(eWhich)) && aPos.X() < aWinSize.Width() && aPos.Y() < aWinSize.Height() ) { // create HintWindow, determines its size by itself mpInputHintWindow.reset(VclPtr::Create(pWin, aTitle, aMessage)); Size aHintWndSize = mpInputHintWindow->GetSizePixel(); long nCellSizeX = 0; long nCellSizeY = 0; aViewData.GetMergeSizePixel(nCol, nRow, nCellSizeX, nCellSizeY); Point aHintPos = calcHintWindowPosition( aPos, Size(nCellSizeX,nCellSizeY), aWinSize, aHintWndSize); mpInputHintWindow->SetPosPixel( aHintPos ); mpInputHintWindow->ToTop(); mpInputHintWindow->Show(); } } else mpInputHintWindow.disposeAndClear(); // list drop-down button if ( pData && pData->HasSelectionList() ) { aListValPos.Set( aViewData.GetCurX(), aViewData.GetCurY(), aViewData.GetTabNo() ); bListValButton = true; } } else mpInputHintWindow.disposeAndClear(); for ( sal_uInt16 i=0; i<4; i++ ) if ( pGridWin[i] && pGridWin[i]->IsVisible() ) pGridWin[i]->UpdateListValPos( bListValButton, aListValPos ); } bool ScTabView::HasHintWindow() const { return mpInputHintWindow.get() != NULL; } void ScTabView::RemoveHintWindow() { mpInputHintWindow.reset(); } // find window that should not be over the cursor static vcl::Window* lcl_GetCareWin(SfxViewFrame* pViewFrm) { //! also spelling ??? (then set the member variables when calling) // search & replace if ( pViewFrm->HasChildWindow(SID_SEARCH_DLG) ) { SfxChildWindow* pChild = pViewFrm->GetChildWindow(SID_SEARCH_DLG); if (pChild) { vcl::Window* pWin = pChild->GetWindow(); if (pWin && pWin->IsVisible()) return pWin; } } // apply changes if ( pViewFrm->HasChildWindow(FID_CHG_ACCEPT) ) { SfxChildWindow* pChild = pViewFrm->GetChildWindow(FID_CHG_ACCEPT); if (pChild) { vcl::Window* pWin = pChild->GetWindow(); if (pWin && pWin->IsVisible()) return pWin; } } return NULL; } // adjust screen with respect to cursor position void ScTabView::AlignToCursor( SCsCOL nCurX, SCsROW nCurY, ScFollowMode eMode, const ScSplitPos* pWhich ) { // now switch active part here ScSplitPos eActive = aViewData.GetActivePart(); ScHSplitPos eActiveX = WhichH(eActive); ScVSplitPos eActiveY = WhichV(eActive); bool bHFix = (aViewData.GetHSplitMode() == SC_SPLIT_FIX); bool bVFix = (aViewData.GetVSplitMode() == SC_SPLIT_FIX); if (bHFix) if (eActiveX == SC_SPLIT_LEFT && nCurX >= (SCsCOL)aViewData.GetFixPosX()) { ActivatePart( (eActiveY==SC_SPLIT_TOP) ? SC_SPLIT_TOPRIGHT : SC_SPLIT_BOTTOMRIGHT ); eActiveX = SC_SPLIT_RIGHT; } if (bVFix) if (eActiveY == SC_SPLIT_TOP && nCurY >= (SCsROW)aViewData.GetFixPosY()) { ActivatePart( (eActiveX==SC_SPLIT_LEFT) ? SC_SPLIT_BOTTOMLEFT : SC_SPLIT_BOTTOMRIGHT ); eActiveY = SC_SPLIT_BOTTOM; } // actual align if ( eMode != SC_FOLLOW_NONE ) { ScSplitPos eAlign; if (pWhich) eAlign = *pWhich; else eAlign = aViewData.GetActivePart(); ScHSplitPos eAlignX = WhichH(eAlign); ScVSplitPos eAlignY = WhichV(eAlign); SCsCOL nDeltaX = (SCsCOL) aViewData.GetPosX(eAlignX); SCsROW nDeltaY = (SCsROW) aViewData.GetPosY(eAlignY); SCsCOL nSizeX = (SCsCOL) aViewData.VisibleCellsX(eAlignX); SCsROW nSizeY = (SCsROW) aViewData.VisibleCellsY(eAlignY); long nCellSizeX; long nCellSizeY; if ( nCurX >= 0 && nCurY >= 0 ) aViewData.GetMergeSizePixel( (SCCOL)nCurX, (SCROW)nCurY, nCellSizeX, nCellSizeY ); else nCellSizeX = nCellSizeY = 0; Size aScrSize = aViewData.GetScrSize(); long nSpaceX = ( aScrSize.Width() - nCellSizeX ) / 2; long nSpaceY = ( aScrSize.Height() - nCellSizeY ) / 2; // nSpaceY: desired start position of cell for FOLLOW_JUMP, modified if dialog interferes bool bForceNew = false; // force new calculation of JUMP position (vertical only) // VisibleCellsY == CellsAtY( GetPosY( eWhichY ), 1, eWhichY ) // when for instance a search dialog is open, don't put the cursor behind the dialog // if possible, put the row with the cursor above or below the dialog //! not if already complelely visible if ( eMode == SC_FOLLOW_JUMP ) { vcl::Window* pCare = lcl_GetCareWin( aViewData.GetViewShell()->GetViewFrame() ); if (pCare) { bool bLimit = false; Rectangle aDlgPixel; Size aWinSize; vcl::Window* pWin = GetActiveWin(); if (pWin) { aDlgPixel = pCare->GetWindowExtentsRelative( pWin ); aWinSize = pWin->GetOutputSizePixel(); // dos the dialog cover the GridWin? if ( aDlgPixel.Right() >= 0 && aDlgPixel.Left() < aWinSize.Width() ) { if ( nCurX < nDeltaX || nCurX >= nDeltaX+nSizeX || nCurY < nDeltaY || nCurY >= nDeltaY+nSizeY ) bLimit = true; // scroll anyway else { // cursor is on the screen Point aStart = aViewData.GetScrPos( nCurX, nCurY, eAlign ); long nCSX, nCSY; aViewData.GetMergeSizePixel( nCurX, nCurY, nCSX, nCSY ); Rectangle aCursor( aStart, Size( nCSX, nCSY ) ); if ( aCursor.IsOver( aDlgPixel ) ) bLimit = true; // cell is covered by the dialog } } } if (bLimit) { bool bBottom = false; long nTopSpace = aDlgPixel.Top(); long nBotSpace = aWinSize.Height() - aDlgPixel.Bottom(); if ( nBotSpace > 0 && nBotSpace > nTopSpace ) { long nDlgBot = aDlgPixel.Bottom(); SCsCOL nWPosX; SCsROW nWPosY; aViewData.GetPosFromPixel( 0,nDlgBot, eAlign, nWPosX, nWPosY ); ++nWPosY; // below the last affected cell SCsROW nDiff = nWPosY - nDeltaY; if ( nCurY >= nDiff ) // position can not be negative { nSpaceY = nDlgBot + ( nBotSpace - nCellSizeY ) / 2; bBottom = true; bForceNew = true; } } if ( !bBottom && nTopSpace > 0 ) { nSpaceY = ( nTopSpace - nCellSizeY ) / 2; bForceNew = true; } } } } SCsCOL nNewDeltaX = nDeltaX; SCsROW nNewDeltaY = nDeltaY; bool bDoLine = false; switch (eMode) { case SC_FOLLOW_JUMP: if ( nCurX < nDeltaX || nCurX >= nDeltaX+nSizeX ) { nNewDeltaX = nCurX - static_cast(aViewData.CellsAtX( nCurX, -1, eAlignX, static_cast(nSpaceX) )); if (nNewDeltaX < 0) nNewDeltaX = 0; nSizeX = (SCsCOL) aViewData.CellsAtX( nNewDeltaX, 1, eAlignX ); } if ( nCurY < nDeltaY || nCurY >= nDeltaY+nSizeY || bForceNew ) { nNewDeltaY = nCurY - static_cast(aViewData.CellsAtY( nCurY, -1, eAlignY, static_cast(nSpaceY) )); if (nNewDeltaY < 0) nNewDeltaY = 0; nSizeY = (SCsROW) aViewData.CellsAtY( nNewDeltaY, 1, eAlignY ); } bDoLine = true; break; case SC_FOLLOW_LINE: bDoLine = true; break; case SC_FOLLOW_FIX: if ( nCurX < nDeltaX || nCurX >= nDeltaX+nSizeX ) { nNewDeltaX = nDeltaX + nCurX - aViewData.GetCurX(); if (nNewDeltaX < 0) nNewDeltaX = 0; nSizeX = (SCsCOL) aViewData.CellsAtX( nNewDeltaX, 1, eAlignX ); } if ( nCurY < nDeltaY || nCurY >= nDeltaY+nSizeY ) { nNewDeltaY = nDeltaY + nCurY - aViewData.GetCurY(); if (nNewDeltaY < 0) nNewDeltaY = 0; nSizeY = (SCsROW) aViewData.CellsAtY( nNewDeltaY, 1, eAlignY ); } // like old version of SC_FOLLOW_JUMP: if ( nCurX < nNewDeltaX || nCurX >= nNewDeltaX+nSizeX ) { nNewDeltaX = nCurX - (nSizeX / 2); if (nNewDeltaX < 0) nNewDeltaX = 0; nSizeX = (SCsCOL) aViewData.CellsAtX( nNewDeltaX, 1, eAlignX ); } if ( nCurY < nNewDeltaY || nCurY >= nNewDeltaY+nSizeY ) { nNewDeltaY = nCurY - (nSizeY / 2); if (nNewDeltaY < 0) nNewDeltaY = 0; nSizeY = (SCsROW) aViewData.CellsAtY( nNewDeltaY, 1, eAlignY ); } bDoLine = true; break; case SC_FOLLOW_NONE: break; default: OSL_FAIL("Wrong cursor mode"); break; } if (bDoLine) { while ( nCurX >= nNewDeltaX+nSizeX ) { nNewDeltaX = nCurX-nSizeX+1; ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); while ( nNewDeltaX < MAXCOL && !pDoc->GetColWidth( nNewDeltaX, nTab ) ) ++nNewDeltaX; nSizeX = (SCsCOL) aViewData.CellsAtX( nNewDeltaX, 1, eAlignX ); } while ( nCurY >= nNewDeltaY+nSizeY ) { nNewDeltaY = nCurY-nSizeY+1; ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); while ( nNewDeltaY < MAXROW && !pDoc->GetRowHeight( nNewDeltaY, nTab ) ) ++nNewDeltaY; nSizeY = (SCsROW) aViewData.CellsAtY( nNewDeltaY, 1, eAlignY ); } if ( nCurX < nNewDeltaX ) nNewDeltaX = nCurX; if ( nCurY < nNewDeltaY ) nNewDeltaY = nCurY; } if ( nNewDeltaX != nDeltaX ) nSizeX = (SCsCOL) aViewData.CellsAtX( nNewDeltaX, 1, eAlignX ); if (nNewDeltaX+nSizeX-1 > MAXCOL) nNewDeltaX = MAXCOL-nSizeX+1; if (nNewDeltaX < 0) nNewDeltaX = 0; if ( nNewDeltaY != nDeltaY ) nSizeY = (SCsROW) aViewData.CellsAtY( nNewDeltaY, 1, eAlignY ); if (nNewDeltaY+nSizeY-1 > MAXROW) nNewDeltaY = MAXROW-nSizeY+1; if (nNewDeltaY < 0) nNewDeltaY = 0; if ( nNewDeltaX != nDeltaX ) ScrollX( nNewDeltaX - nDeltaX, eAlignX ); if ( nNewDeltaY != nDeltaY ) ScrollY( nNewDeltaY - nDeltaY, eAlignY ); } // switch active part again if (bHFix) if (eActiveX == SC_SPLIT_RIGHT && nCurX < (SCsCOL)aViewData.GetFixPosX()) { ActivatePart( (eActiveY==SC_SPLIT_TOP) ? SC_SPLIT_TOPLEFT : SC_SPLIT_BOTTOMLEFT ); eActiveX = SC_SPLIT_LEFT; } if (bVFix) if (eActiveY == SC_SPLIT_BOTTOM && nCurY < (SCsROW)aViewData.GetFixPosY()) { ActivatePart( (eActiveX==SC_SPLIT_LEFT) ? SC_SPLIT_TOPLEFT : SC_SPLIT_TOPRIGHT ); eActiveY = SC_SPLIT_TOP; } } bool ScTabView::SelMouseButtonDown( const MouseEvent& rMEvt ) { bool bRet = false; // #i3875# *Hack* bool bMod1Locked = (aViewData.GetViewShell()->GetLockedModifiers() & KEY_MOD1) != 0; aViewData.SetSelCtrlMouseClick( rMEvt.IsMod1() || bMod1Locked ); if ( pSelEngine ) { bMoveIsShift = rMEvt.IsShift(); bRet = pSelEngine->SelMouseButtonDown( rMEvt ); bMoveIsShift = false; } aViewData.SetSelCtrlMouseClick( false ); // #i3875# *Hack* return bRet; } // MoveCursor - with adjustment of the view section void ScTabView::MoveCursorAbs( SCsCOL nCurX, SCsROW nCurY, ScFollowMode eMode, bool bShift, bool bControl, bool bKeepOld, bool bKeepSel ) { if (!bKeepOld) aViewData.ResetOldCursor(); // #i123629# if( aViewData.GetViewShell()->GetForceFocusOnCurCell() ) aViewData.GetViewShell()->SetForceFocusOnCurCell( !ValidColRow(nCurX, nCurY) ); if (nCurX < 0) nCurX = 0; if (nCurY < 0) nCurY = 0; if (nCurX > MAXCOL) nCurX = MAXCOL; if (nCurY > MAXROW) nCurY = MAXROW; HideAllCursors(); // switch of active now in AlignToCursor AlignToCursor( nCurX, nCurY, eMode ); if (bKeepSel) { SetCursor( nCurX, nCurY ); // keep selection // If the cursor is in existing selection, it's a cursor movement by // ENTER or TAB. If not, then it's a new selection during ADD // selection mode. const ScMarkData& rMark = aViewData.GetMarkData(); ScRangeList aSelList; rMark.FillRangeListWithMarks(&aSelList, false); if (!aSelList.In(ScRange(nCurX, nCurY, aViewData.GetTabNo()))) // Cursor not in existing selection. Start a new selection. DoneBlockMode(true); } else { if (!bShift) { // Remove all marked data on cursor movement unless the Shift is locked. ScMarkData& rMark = aViewData.GetMarkData(); bool bMarked = rMark.IsMarked() || rMark.IsMultiMarked(); if (bMarked) { rMark.ResetMark(); DoneBlockMode(); InitOwnBlockMode(); MarkDataChanged(); } } bool bSame = ( nCurX == aViewData.GetCurX() && nCurY == aViewData.GetCurY() ); bMoveIsShift = bShift; pSelEngine->CursorPosChanging( bShift, bControl ); bMoveIsShift = false; aFunctionSet.SetCursorAtCell( nCurX, nCurY, false ); // If the cursor has not been moved, the SelectionChanged for canceling the // selection has to happen here individually: if (bSame) SelectionChanged(); } ShowAllCursors(); TestHintWindow(); } void ScTabView::MoveCursorRel( SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel ) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); bool bSkipProtected = false, bSkipUnprotected = false; ScTableProtection* pProtect = pDoc->GetTabProtection(nTab); if ( pProtect && pProtect->isProtected() ) { bSkipProtected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS); bSkipUnprotected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS); } if ( bSkipProtected && bSkipUnprotected ) return; SCsCOL nOldX; SCsROW nOldY; SCsCOL nCurX; SCsROW nCurY; if ( aViewData.IsRefMode() ) { nOldX = (SCsCOL) aViewData.GetRefEndX(); nOldY = (SCsROW) aViewData.GetRefEndY(); nCurX = nOldX + nMovX; nCurY = nOldY + nMovY; } else { nOldX = (SCsCOL) aViewData.GetCurX(); nOldY = (SCsROW) aViewData.GetCurY(); nCurX = (nMovX != 0) ? nOldX+nMovX : (SCsCOL) aViewData.GetOldCurX(); nCurY = (nMovY != 0) ? nOldY+nMovY : (SCsROW) aViewData.GetOldCurY(); } aViewData.ResetOldCursor(); if (nMovX != 0 && ValidColRow(nCurX,nCurY)) SkipCursorHorizontal(nCurX, nCurY, nOldX, nMovX); if (nMovY != 0 && ValidColRow(nCurX,nCurY)) SkipCursorVertical(nCurX, nCurY, nOldY, nMovY); MoveCursorAbs( nCurX, nCurY, eMode, bShift, false, true, bKeepSel ); } void ScTabView::MoveCursorPage( SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel ) { SCsCOL nPageX; SCsROW nPageY; GetPageMoveEndPosition(nMovX, nMovY, nPageX, nPageY); MoveCursorRel( nPageX, nPageY, eMode, bShift, bKeepSel ); } void ScTabView::MoveCursorArea( SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel ) { SCsCOL nNewX; SCsROW nNewY; GetAreaMoveEndPosition(nMovX, nMovY, eMode, nNewX, nNewY, eMode); MoveCursorRel(nNewX, nNewY, eMode, bShift, bKeepSel); } void ScTabView::MoveCursorEnd( SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode, bool bShift, bool bKeepSel ) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); SCCOL nCurX; SCROW nCurY; aViewData.GetMoveCursor( nCurX,nCurY ); SCCOL nNewX = nCurX; SCROW nNewY = nCurY; SCCOL nUsedX = 0; SCROW nUsedY = 0; if ( nMovX > 0 || nMovY > 0 ) pDoc->GetPrintArea( nTab, nUsedX, nUsedY ); // get end if (nMovX<0) nNewX=0; else if (nMovX>0) nNewX=nUsedX; // last used range if (nMovY<0) nNewY=0; else if (nMovY>0) nNewY=nUsedY; aViewData.ResetOldCursor(); MoveCursorRel( ((SCsCOL)nNewX)-(SCsCOL)nCurX, ((SCsROW)nNewY)-(SCsROW)nCurY, eMode, bShift, bKeepSel ); } void ScTabView::MoveCursorScreen( SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode, bool bShift ) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); SCCOL nCurX; SCROW nCurY; aViewData.GetMoveCursor( nCurX,nCurY ); SCCOL nNewX = nCurX; SCROW nNewY = nCurY; ScSplitPos eWhich = aViewData.GetActivePart(); SCCOL nPosX = aViewData.GetPosX( WhichH(eWhich) ); SCROW nPosY = aViewData.GetPosY( WhichV(eWhich) ); SCCOL nAddX = aViewData.VisibleCellsX( WhichH(eWhich) ); if (nAddX != 0) --nAddX; SCROW nAddY = aViewData.VisibleCellsY( WhichV(eWhich) ); if (nAddY != 0) --nAddY; if (nMovX<0) nNewX=nPosX; else if (nMovX>0) nNewX=nPosX+nAddX; if (nMovY<0) nNewY=nPosY; else if (nMovY>0) nNewY=nPosY+nAddY; aViewData.SetOldCursor( nNewX,nNewY ); pDoc->SkipOverlapped(nNewX, nNewY, nTab); MoveCursorAbs( nNewX, nNewY, eMode, bShift, false, true ); } void ScTabView::MoveCursorEnter( bool bShift ) // bShift -> up/down { const ScInputOptions& rOpt = SC_MOD()->GetInputOptions(); if (!rOpt.GetMoveSelection()) { aViewData.UpdateInputHandler(true); return; } SCsCOL nMoveX = 0; SCsROW nMoveY = 0; switch ((ScDirection)rOpt.GetMoveDir()) { case DIR_BOTTOM: nMoveY = bShift ? -1 : 1; break; case DIR_RIGHT: nMoveX = bShift ? -1 : 1; break; case DIR_TOP: nMoveY = bShift ? 1 : -1; break; case DIR_LEFT: nMoveX = bShift ? 1 : -1; break; } ScMarkData& rMark = aViewData.GetMarkData(); if (rMark.IsMarked() || rMark.IsMultiMarked()) { SCCOL nCurX; SCROW nCurY; aViewData.GetMoveCursor( nCurX,nCurY ); SCCOL nNewX = nCurX; SCROW nNewY = nCurY; SCTAB nTab = aViewData.GetTabNo(); ScDocument* pDoc = aViewData.GetDocument(); pDoc->GetNextPos( nNewX,nNewY, nTab, nMoveX,nMoveY, true, false, rMark ); MoveCursorRel( ((SCsCOL)nNewX)-(SCsCOL)nCurX, ((SCsROW)nNewY)-(SCsROW)nCurY, SC_FOLLOW_LINE, false, true ); // update input line even if cursor was not moved if ( nNewX == nCurX && nNewY == nCurY ) aViewData.UpdateInputHandler(true); } else { if ( nMoveY != 0 && !nMoveX ) { // after Tab and Enter back to the starting column again SCCOL nTabCol = aViewData.GetTabStartCol(); if (nTabCol != SC_TABSTART_NONE) { SCCOL nCurX; SCROW nCurY; aViewData.GetMoveCursor( nCurX,nCurY ); nMoveX = ((SCsCOL)nTabCol)-(SCsCOL)nCurX; } } MoveCursorRel( nMoveX,nMoveY, SC_FOLLOW_LINE, false ); } } bool ScTabView::MoveCursorKeyInput( const KeyEvent& rKeyEvent ) { const vcl::KeyCode& rKCode = rKeyEvent.GetKeyCode(); enum { MOD_NONE, MOD_CTRL, MOD_ALT, MOD_BOTH } eModifier = rKCode.IsMod1() ? (rKCode.IsMod2() ? MOD_BOTH : MOD_CTRL) : (rKCode.IsMod2() ? MOD_ALT : MOD_NONE); bool bSel = rKCode.IsShift(); sal_uInt16 nCode = rKCode.GetCode(); // CURSOR keys SCsCOL nDX = 0; SCsROW nDY = 0; switch( nCode ) { case KEY_LEFT: nDX = -1; break; case KEY_RIGHT: nDX = 1; break; case KEY_UP: nDY = -1; break; case KEY_DOWN: nDY = 1; break; } if( nDX != 0 || nDY != 0 ) { switch( eModifier ) { case MOD_NONE: MoveCursorRel( nDX, nDY, SC_FOLLOW_LINE, bSel ); break; case MOD_CTRL: MoveCursorArea( nDX, nDY, SC_FOLLOW_JUMP, bSel ); break; default: { // added to avoid warnings } } // always true to suppress changes of col/row size (ALT+CURSOR) return true; } // PAGEUP/PAGEDOWN if( (nCode == KEY_PAGEUP) || (nCode == KEY_PAGEDOWN) ) { nDX = (nCode == KEY_PAGEUP) ? -1 : 1; switch( eModifier ) { case MOD_NONE: MoveCursorPage( 0, static_cast(nDX), SC_FOLLOW_FIX, bSel ); break; case MOD_ALT: MoveCursorPage( nDX, 0, SC_FOLLOW_FIX, bSel ); break; case MOD_CTRL: SelectNextTab( nDX ); break; default: { // added to avoid warnings } } return true; } // HOME/END if( (nCode == KEY_HOME) || (nCode == KEY_END) ) { nDX = (nCode == KEY_HOME) ? -1 : 1; ScFollowMode eMode = (nCode == KEY_HOME) ? SC_FOLLOW_LINE : SC_FOLLOW_JUMP; switch( eModifier ) { case MOD_NONE: MoveCursorEnd( nDX, 0, eMode, bSel ); break; case MOD_CTRL: MoveCursorEnd( nDX, static_cast(nDX), eMode, bSel ); break; default: { // added to avoid warnings } } return true; } return false; } // next/previous unprotected cell void ScTabView::FindNextUnprot( bool bShift, bool bInSelection ) { short nMove = bShift ? -1 : 1; ScMarkData& rMark = aViewData.GetMarkData(); bool bMarked = bInSelection && (rMark.IsMarked() || rMark.IsMultiMarked()); SCCOL nCurX; SCROW nCurY; aViewData.GetMoveCursor( nCurX,nCurY ); SCCOL nNewX = nCurX; SCROW nNewY = nCurY; SCTAB nTab = aViewData.GetTabNo(); ScDocument* pDoc = aViewData.GetDocument(); pDoc->GetNextPos( nNewX,nNewY, nTab, nMove,0, bMarked, true, rMark ); SCCOL nTabCol = aViewData.GetTabStartCol(); if ( nTabCol == SC_TABSTART_NONE ) nTabCol = nCurX; // back to this column after Enter MoveCursorRel( ((SCsCOL)nNewX)-(SCsCOL)nCurX, ((SCsROW)nNewY)-(SCsROW)nCurY, SC_FOLLOW_LINE, false, true ); // TabCol is reset in MoveCursorRel... aViewData.SetTabStartCol( nTabCol ); } void ScTabView::MarkColumns() { SCCOL nStartCol; SCCOL nEndCol; ScMarkData& rMark = aViewData.GetMarkData(); if (rMark.IsMarked()) { ScRange aMarkRange; rMark.GetMarkArea( aMarkRange ); nStartCol = aMarkRange.aStart.Col(); nEndCol = aMarkRange.aEnd.Col(); } else { SCROW nDummy; aViewData.GetMoveCursor( nStartCol, nDummy ); nEndCol=nStartCol; } SCTAB nTab = aViewData.GetTabNo(); DoneBlockMode(); InitBlockMode( nStartCol,0, nTab ); MarkCursor( nEndCol,MAXROW, nTab ); SelectionChanged(); } void ScTabView::MarkRows() { SCROW nStartRow; SCROW nEndRow; ScMarkData& rMark = aViewData.GetMarkData(); if (rMark.IsMarked()) { ScRange aMarkRange; rMark.GetMarkArea( aMarkRange ); nStartRow = aMarkRange.aStart.Row(); nEndRow = aMarkRange.aEnd.Row(); } else { SCCOL nDummy; aViewData.GetMoveCursor( nDummy, nStartRow ); nEndRow=nStartRow; } SCTAB nTab = aViewData.GetTabNo(); DoneBlockMode(); InitBlockMode( 0,nStartRow, nTab ); MarkCursor( MAXCOL,nEndRow, nTab ); SelectionChanged(); } void ScTabView::MarkDataArea( bool bIncludeCursor ) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); SCCOL nStartCol = aViewData.GetCurX(); SCROW nStartRow = aViewData.GetCurY(); SCCOL nEndCol = nStartCol; SCROW nEndRow = nStartRow; pDoc->GetDataArea( nTab, nStartCol, nStartRow, nEndCol, nEndRow, bIncludeCursor, false ); HideAllCursors(); DoneBlockMode(); InitBlockMode( nStartCol, nStartRow, nTab ); MarkCursor( nEndCol, nEndRow, nTab ); ShowAllCursors(); SelectionChanged(); } void ScTabView::MarkMatrixFormula() { ScDocument* pDoc = aViewData.GetDocument(); ScAddress aCursor( aViewData.GetCurX(), aViewData.GetCurY(), aViewData.GetTabNo() ); ScRange aMatrix; if ( pDoc->GetMatrixFormulaRange( aCursor, aMatrix ) ) { MarkRange( aMatrix, false ); // cursor is already within the range } } void ScTabView::MarkRange( const ScRange& rRange, bool bSetCursor, bool bContinue ) { SCTAB nTab = rRange.aStart.Tab(); SetTabNo( nTab ); HideAllCursors(); DoneBlockMode( bContinue ); // bContinue==true -> clear old mark if (bSetCursor) // if Cursor is set, also always align { SCCOL nAlignX = rRange.aStart.Col(); SCROW nAlignY = rRange.aStart.Row(); bool bCol = ( rRange.aStart.Col() == 0 && rRange.aEnd.Col() == MAXCOL ) && !aViewData.GetDocument()->IsInVBAMode(); bool bRow = ( rRange.aStart.Row() == 0 && rRange.aEnd.Row() == MAXROW ); if ( bCol ) nAlignX = aViewData.GetPosX(WhichH(aViewData.GetActivePart())); if ( bRow ) nAlignY = aViewData.GetPosY(WhichV(aViewData.GetActivePart())); AlignToCursor( nAlignX, nAlignY, SC_FOLLOW_JUMP ); } InitBlockMode( rRange.aStart.Col(), rRange.aStart.Row(), nTab ); MarkCursor( rRange.aEnd.Col(), rRange.aEnd.Row(), nTab ); if (bSetCursor) { SCCOL nPosX = rRange.aStart.Col(); SCROW nPosY = rRange.aStart.Row(); ScDocument* pDoc = aViewData.GetDocument(); pDoc->SkipOverlapped(nPosX, nPosY, nTab); aViewData.ResetOldCursor(); SetCursor( nPosX, nPosY ); } ShowAllCursors(); SelectionChanged(); } void ScTabView::Unmark() { ScMarkData& rMark = aViewData.GetMarkData(); if ( rMark.IsMarked() || rMark.IsMultiMarked() ) { SCCOL nCurX; SCROW nCurY; aViewData.GetMoveCursor( nCurX,nCurY ); MoveCursorAbs( nCurX, nCurY, SC_FOLLOW_NONE, false, false ); SelectionChanged(); } } void ScTabView::SetMarkData( const ScMarkData& rNew ) { DoneBlockMode(); InitOwnBlockMode(); aViewData.GetMarkData() = rNew; MarkDataChanged(); } void ScTabView::MarkDataChanged() { // has to be called after making direct changes to mark data (not via MarkCursor etc) UpdateSelectionOverlay(); } void ScTabView::SelectNextTab( short nDir, bool bExtendSelection ) { if (!nDir) return; OSL_ENSURE( nDir==-1 || nDir==1, "SelectNextTab: invalid value"); ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); if (nDir<0) { if (!nTab) return; --nTab; while (!pDoc->IsVisible(nTab)) { if (!nTab) return; --nTab; } } else { SCTAB nCount = pDoc->GetTableCount(); ++nTab; if (nTab >= nCount) return; while (!pDoc->IsVisible(nTab)) { ++nTab; if (nTab >= nCount) return; } } SetTabNo( nTab, false, bExtendSelection ); PaintExtras(); } // SetTabNo - set the displayed sheet void ScTabView::SetTabNo( SCTAB nTab, bool bNew, bool bExtendSelection, bool bSameTabButMoved ) { if ( !ValidTab(nTab) ) { OSL_FAIL("SetTabNo: invalid sheet"); return; } if ( nTab != aViewData.GetTabNo() || bNew ) { // FormShell would like to bee informed before the switch FmFormShell* pFormSh = aViewData.GetViewShell()->GetFormShell(); if (pFormSh) { bool bAllowed = pFormSh->PrepareClose(); if (!bAllowed) { //! error message? or does FormShell do it? //! return error flag and cancel actions return; // FormShell says that it can not be switched } } // not InputEnterHandler due to reference input ScDocument* pDoc = aViewData.GetDocument(); pDoc->MakeTable( nTab ); // Update pending row heights before switching the sheet, so Reschedule from the progress bar // doesn't paint the new sheet with old heights aViewData.GetDocShell()->UpdatePendingRowHeights( nTab ); SCTAB nTabCount = pDoc->GetTableCount(); SCTAB nOldPos = nTab; while (!pDoc->IsVisible(nTab)) // search for next visible { bool bUp = (nTab>=nOldPos); if (bUp) { ++nTab; if (nTab>=nTabCount) { nTab = nOldPos; bUp = false; } } if (!bUp) { if (nTab != 0) --nTab; else { OSL_FAIL("no visible sheets"); pDoc->SetVisible( 0, true ); } } } // #i71490# Deselect drawing objects before changing the sheet number in view data, // so the handling of notes still has the sheet selected on which the notes are. DrawDeselectAll(); ScModule* pScMod = SC_MOD(); bool bRefMode = pScMod->IsFormulaMode(); if ( !bRefMode ) // query, so that RefMode works when switching sheet { DoneBlockMode(); pSelEngine->Reset(); // reset all flags, including locked modifiers aViewData.SetRefTabNo( nTab ); } ScSplitPos eOldActive = aViewData.GetActivePart(); // before switching bool bFocus = pGridWin[eOldActive]->HasFocus(); aViewData.SetTabNo( nTab ); // UpdateShow before SetCursor, so that UpdateAutoFillMark finds the correct // window (is called from SetCursor) UpdateShow(); aViewData.ResetOldCursor(); SfxBindings& rBindings = aViewData.GetBindings(); ScMarkData& rMark = aViewData.GetMarkData(); bool bAllSelected = true; for (SCTAB nSelTab = 0; nSelTab < nTabCount; ++nSelTab) { if (!pDoc->IsVisible(nSelTab) || rMark.GetTableSelect(nSelTab)) { if (nTab == nSelTab) // This tab is already in selection. Keep the current // selection. bExtendSelection = true; } else { bAllSelected = false; if (bExtendSelection) // We got what we need. No need to stay in the loop. break; } } if (bAllSelected && !bNew) // #i6327# if all tables are selected, a selection event (#i6330#) will deselect all // (not if called with bNew to update settings) bExtendSelection = false; if (bExtendSelection) rMark.SelectTable( nTab, true ); else { rMark.SelectOneTable( nTab ); rBindings.Invalidate( FID_FILL_TAB ); rBindings.Invalidate( FID_TAB_DESELECTALL ); } SetCursor( aViewData.GetCurX(), aViewData.GetCurY(), true ); bool bUnoRefDialog = pScMod->IsRefDialogOpen() && pScMod->GetCurRefDlgId() == WID_SIMPLE_REF; // recalc zoom-dependent values (before TabChanged, before UpdateEditViewPos) RefreshZoom(); UpdateVarZoom(); if ( bRefMode ) // hide EditView if necessary (after aViewData.SetTabNo !) { for (sal_uInt16 i = 0; i < 4; ++i) if (pGridWin[i] && pGridWin[i]->IsVisible()) pGridWin[i]->UpdateEditViewPos(); } TabChanged(bSameTabButMoved); // DrawView UpdateVisibleRange(); aViewData.GetViewShell()->WindowChanged(); // if the active window has changed if ( !bUnoRefDialog ) aViewData.GetViewShell()->DisconnectAllClients(); // important for floating frames else { // hide / show inplace client ScClient* pClient = static_cast(aViewData.GetViewShell()->GetIPClient()); if ( pClient && pClient->IsObjectInPlaceActive() ) { Rectangle aObjArea = pClient->GetObjArea(); if ( nTab == aViewData.GetRefTabNo() ) { // move to its original position SdrOle2Obj* pDrawObj = pClient->GetDrawObj(); if ( pDrawObj ) { Rectangle aRect = pDrawObj->GetLogicRect(); MapMode aMapMode( MAP_100TH_MM ); Size aOleSize = pDrawObj->GetOrigObjSize( &aMapMode ); aRect.SetSize( aOleSize ); aObjArea = aRect; } } else { // move to an invisible position aObjArea.SetPos( Point( 0, -2*aObjArea.GetHeight() ) ); } pClient->SetObjArea( aObjArea ); } } if ( bFocus && aViewData.GetActivePart() != eOldActive && !bRefMode ) ActiveGrabFocus(); // grab focus to the pane that's active now // freeze bool bResize = false; if ( aViewData.GetHSplitMode() == SC_SPLIT_FIX ) if (aViewData.UpdateFixX()) bResize = true; if ( aViewData.GetVSplitMode() == SC_SPLIT_FIX ) if (aViewData.UpdateFixY()) bResize = true; if (bResize) RepeatResize(); InvalidateSplit(); if ( aViewData.IsPagebreakMode() ) UpdatePageBreakData(); //! asynchronously ?? // Form Layer must know the visible area of the new sheet // that is why MapMode must already be correct here for (sal_uInt16 i=0; i<4; i++) if (pGridWin[i]) pGridWin[i]->SetMapMode( pGridWin[i]->GetDrawMapMode() ); SetNewVisArea(); PaintGrid(); PaintTop(); PaintLeft(); PaintExtras(); DoResize( aBorderPos, aFrameSize ); rBindings.Invalidate( SID_DELETE_PRINTAREA ); // Menu rBindings.Invalidate( FID_DEL_MANUALBREAKS ); rBindings.Invalidate( FID_RESET_PRINTZOOM ); rBindings.Invalidate( SID_STATUS_DOCPOS ); // Status bar rBindings.Invalidate( SID_ROWCOL_SELCOUNT ); // Status bar rBindings.Invalidate( SID_STATUS_PAGESTYLE ); // Status bar rBindings.Invalidate( SID_CURRENTTAB ); // Navigator rBindings.Invalidate( SID_STYLE_FAMILY2 ); // Designer rBindings.Invalidate( SID_STYLE_FAMILY4 ); // Designer rBindings.Invalidate( SID_TABLES_COUNT ); if(pScMod->IsRefDialogOpen()) { sal_uInt16 nCurRefDlgId=pScMod->GetCurRefDlgId(); SfxViewFrame* pViewFrm = aViewData.GetViewShell()->GetViewFrame(); SfxChildWindow* pChildWnd = pViewFrm->GetChildWindow( nCurRefDlgId ); IAnyRefDialog* pRefDlg = pChildWnd ? dynamic_cast(pChildWnd->GetWindow()) : NULL; if (pRefDlg) { pRefDlg->ViewShellChanged(); } } } } // paint functions - only for this View void ScTabView::MakeEditView( ScEditEngineDefaulter* pEngine, SCCOL nCol, SCROW nRow ) { DrawDeselectAll(); if (pDrawView) DrawEnableAnim( false ); EditView* pSpellingView = aViewData.GetSpellingView(); for (sal_uInt16 i=0; i<4; i++) if (pGridWin[i]) if ( pGridWin[i]->IsVisible() && !aViewData.HasEditView((ScSplitPos)i) ) { ScHSplitPos eHWhich = WhichH( (ScSplitPos) i ); ScVSplitPos eVWhich = WhichV( (ScSplitPos) i ); SCCOL nScrX = aViewData.GetPosX( eHWhich ); SCROW nScrY = aViewData.GetPosY( eVWhich ); bool bPosVisible = ( nCol >= nScrX && nCol <= nScrX + aViewData.VisibleCellsX(eHWhich) + 1 && nRow >= nScrY && nRow <= nScrY + aViewData.VisibleCellsY(eVWhich) + 1 ); // for the active part, create edit view even if outside the visible area, // so input isn't lost (and the edit view may be scrolled into the visible area) // #i26433# during spelling, the spelling view must be active if ( bPosVisible || aViewData.GetActivePart() == (ScSplitPos) i || ( pSpellingView && aViewData.GetEditView((ScSplitPos) i) == pSpellingView ) ) { pGridWin[i]->HideCursor(); pGridWin[i]->DeleteCursorOverlay(); pGridWin[i]->DeleteAutoFillOverlay(); pGridWin[i]->DeleteCopySourceOverlay(); // flush OverlayManager before changing MapMode to text edit pGridWin[i]->flushOverlayManager(); // MapMode must be set after HideCursor pGridWin[i]->SetMapMode(aViewData.GetLogicMode()); aViewData.SetEditEngine( (ScSplitPos) i, pEngine, pGridWin[i], nCol, nRow ); if ( !bPosVisible ) { // move the edit view area to the real (possibly negative) position, // or hide if completely above or left of the window pGridWin[i]->UpdateEditViewPos(); } } } if (aViewData.GetViewShell()->HasAccessibilityObjects()) aViewData.GetViewShell()->BroadcastAccessibility(SfxSimpleHint(SC_HINT_ACC_ENTEREDITMODE)); } void ScTabView::UpdateEditView() { ScSplitPos eActive = aViewData.GetActivePart(); for (sal_uInt16 i=0; i<4; i++) if (aViewData.HasEditView( (ScSplitPos) i )) { EditView* pEditView = aViewData.GetEditView( (ScSplitPos) i ); aViewData.SetEditEngine( (ScSplitPos) i, static_cast(pEditView->GetEditEngine()), pGridWin[i], GetViewData().GetCurX(), GetViewData().GetCurY() ); if ( (ScSplitPos)i == eActive ) pEditView->ShowCursor( false ); } } void ScTabView::KillEditView( bool bNoPaint ) { sal_uInt16 i; SCCOL nCol1 = aViewData.GetEditStartCol(); SCROW nRow1 = aViewData.GetEditStartRow(); SCCOL nCol2 = aViewData.GetEditEndCol(); SCROW nRow2 = aViewData.GetEditEndRow(); bool bPaint[4]; bool bNotifyAcc = false; bool bExtended = nRow1 != nRow2; // column is painted to the end anyway bool bAtCursor = nCol1 <= aViewData.GetCurX() && nCol2 >= aViewData.GetCurX() && nRow1 == aViewData.GetCurY(); for (i=0; i<4; i++) { bPaint[i] = aViewData.HasEditView( (ScSplitPos) i ); if (bPaint[i]) bNotifyAcc = true; } // #108931#; notify accessibility before all things happen if ((bNotifyAcc) && (aViewData.GetViewShell()->HasAccessibilityObjects())) aViewData.GetViewShell()->BroadcastAccessibility(SfxSimpleHint(SC_HINT_ACC_LEAVEEDITMODE)); aViewData.ResetEditView(); for (i=0; i<4; i++) if (pGridWin[i] && bPaint[i]) if (pGridWin[i]->IsVisible()) { pGridWin[i]->ShowCursor(); pGridWin[i]->SetMapMode(pGridWin[i]->GetDrawMapMode()); // #i73567# the cell still has to be repainted if (bExtended || ( bAtCursor && !bNoPaint )) { pGridWin[i]->Draw( nCol1, nRow1, nCol2, nRow2 ); pGridWin[i]->UpdateSelectionOverlay(); } } if (pDrawView) DrawEnableAnim( true ); // GrabFocus always when this View is active and // when the input row has the focus bool bGrabFocus = false; if (aViewData.IsActive()) { ScInputHandler* pInputHdl = SC_MOD()->GetInputHdl(); if ( pInputHdl ) { ScInputWindow* pInputWin = pInputHdl->GetInputWindow(); if (pInputWin && pInputWin->IsInputActive()) bGrabFocus = true; } } if (bGrabFocus) { // should be done like this, so that Sfx notice it, but it does not work: //! aViewData.GetViewShell()->GetViewFrame()->GetWindow().GrabFocus(); // therfore first like this: GetActiveWin()->GrabFocus(); } // cursor query only after GrabFocus for (i=0; i<4; i++) if (pGridWin[i] && pGridWin[i]->IsVisible()) { vcl::Cursor* pCur = pGridWin[i]->GetCursor(); if (pCur && pCur->IsVisible()) pCur->Hide(); if(bPaint[i]) { pGridWin[i]->UpdateCursorOverlay(); pGridWin[i]->UpdateAutoFillOverlay(); } } } void ScTabView::UpdateFormulas() { if ( aViewData.GetDocument()->IsAutoCalcShellDisabled() ) return ; sal_uInt16 i; for (i=0; i<4; i++) if (pGridWin[i]) if (pGridWin[i]->IsVisible()) pGridWin[i]->UpdateFormulas(); if ( aViewData.IsPagebreakMode() ) UpdatePageBreakData(); //! asynchronous UpdateHeaderWidth(); // if in edit mode, adjust edit view area because widths/heights may have changed if ( aViewData.HasEditView( aViewData.GetActivePart() ) ) UpdateEditView(); } // PaintArea - repaint block void ScTabView::PaintArea( SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow, ScUpdateMode eMode ) { SCCOL nCol1; SCROW nRow1; SCCOL nCol2; SCROW nRow2; PutInOrder( nStartCol, nEndCol ); PutInOrder( nStartRow, nEndRow ); for (size_t i = 0; i < 4; ++i) { if (!pGridWin[i] || !pGridWin[i]->IsVisible()) continue; ScHSplitPos eHWhich = WhichH( (ScSplitPos) i ); ScVSplitPos eVWhich = WhichV( (ScSplitPos) i ); bool bOut = false; nCol1 = nStartCol; nRow1 = nStartRow; nCol2 = nEndCol; nRow2 = nEndRow; SCCOL nScrX = aViewData.GetPosX( eHWhich ); SCROW nScrY = aViewData.GetPosY( eVWhich ); if (nCol1 < nScrX) nCol1 = nScrX; if (nCol2 < nScrX) { if ( eMode == SC_UPDATE_ALL ) // for UPDATE_ALL, paint anyway nCol2 = nScrX; // (because of extending strings to the right) else bOut = true; // completely outside the window } if (nRow1 < nScrY) nRow1 = nScrY; if (nRow2 < nScrY) bOut = true; SCCOL nLastX = nScrX + aViewData.VisibleCellsX( eHWhich ) + 1; SCROW nLastY = nScrY + aViewData.VisibleCellsY( eVWhich ) + 1; if (nCol1 > nLastX) bOut = true; if (nCol2 > nLastX) nCol2 = nLastX; if (nRow1 > nLastY) bOut = true; if (nRow2 > nLastY) nRow2 = nLastY; if (bOut) continue; if ( eMode == SC_UPDATE_CHANGED ) pGridWin[i]->Draw( nCol1, nRow1, nCol2, nRow2, eMode ); else // ALL or MARKS { bool bLayoutRTL = aViewData.GetDocument()->IsLayoutRTL( aViewData.GetTabNo() ); long nLayoutSign = bLayoutRTL ? -1 : 1; Point aStart = aViewData.GetScrPos( nCol1, nRow1, (ScSplitPos) i ); Point aEnd = aViewData.GetScrPos( nCol2+1, nRow2+1, (ScSplitPos) i ); if ( eMode == SC_UPDATE_ALL ) aEnd.X() = bLayoutRTL ? 0 : (pGridWin[i]->GetOutputSizePixel().Width()); aEnd.X() -= nLayoutSign; aEnd.Y() -= 1; // #i85232# include area below cells (could be done in GetScrPos?) if ( eMode == SC_UPDATE_ALL && nRow2 >= MAXROW ) aEnd.Y() = pGridWin[i]->GetOutputSizePixel().Height(); aStart.X() -= nLayoutSign; // include change marks aStart.Y() -= 1; bool bMarkClipped = aViewData.GetOptions().GetOption( VOPT_CLIPMARKS ); if (bMarkClipped) { // ScColumn::IsEmptyBlock has to be optimized for this // (switch to Search() ) //!if ( nCol1 > 0 && !aViewData.GetDocument()->IsBlockEmpty( //! aViewData.GetTabNo(), //! 0, nRow1, nCol1-1, nRow2 ) ) { long nMarkPixel = (long)( SC_CLIPMARK_SIZE * aViewData.GetPPTX() ); aStart.X() -= nMarkPixel * nLayoutSign; } } pGridWin[i]->Invalidate( pGridWin[i]->PixelToLogic( Rectangle( aStart,aEnd ) ) ); } } // #i79909# Calling UpdateAllOverlays here isn't necessary and would lead to overlay calls from a timer, // with a wrong MapMode if editing in a cell (reference input). // #i80499# Overlays need updates in a lot of cases, e.g. changing row/column size, // or showing/hiding outlines. TODO: selections in inactive windows are vanishing. // #i84689# With relative conditional formats, PaintArea may be called often (for each changed cell), // so UpdateAllOverlays was moved to ScTabViewShell::Notify and is called only if PAINT_LEFT/PAINT_TOP // is set (width or height changed). } void ScTabView::PaintRangeFinderEntry (ScRangeFindData* pData, const SCTAB nTab) { ScRange aRef = pData->aRef; aRef.PutInOrder(); // PutInOrder for the queries below if ( aRef.aStart == aRef.aEnd ) //! ignore sheet? aViewData.GetDocument()->ExtendMerge(aRef); if ( aRef.aStart.Tab() >= nTab && aRef.aEnd.Tab() <= nTab ) { SCCOL nCol1 = aRef.aStart.Col(); SCROW nRow1 = aRef.aStart.Row(); SCCOL nCol2 = aRef.aEnd.Col(); SCROW nRow2 = aRef.aEnd.Row(); // remove -> repaint // SC_UPDATE_MARKS: Invalidate, nothing until end of row bool bHiddenEdge = false; SCROW nTmp; ScDocument* pDoc = aViewData.GetDocument(); while ( nCol1 > 0 && pDoc->ColHidden(nCol1, nTab) ) { --nCol1; bHiddenEdge = true; } while ( nCol2 < MAXCOL && pDoc->ColHidden(nCol2, nTab) ) { ++nCol2; bHiddenEdge = true; } nTmp = pDoc->LastVisibleRow(0, nRow1, nTab); if (!ValidRow(nTmp)) nTmp = 0; if (nTmp < nRow1) { nRow1 = nTmp; bHiddenEdge = true; } nTmp = pDoc->FirstVisibleRow(nRow2, MAXROW, nTab); if (!ValidRow(nTmp)) nTmp = MAXROW; if (nTmp > nRow2) { nRow2 = nTmp; bHiddenEdge = true; } if ( nCol2 - nCol1 > 1 && nRow2 - nRow1 > 1 && !bHiddenEdge ) { // only along the edges PaintArea( nCol1, nRow1, nCol2, nRow1, SC_UPDATE_MARKS ); PaintArea( nCol1, nRow1+1, nCol1, nRow2-1, SC_UPDATE_MARKS ); PaintArea( nCol2, nRow1+1, nCol2, nRow2-1, SC_UPDATE_MARKS ); PaintArea( nCol1, nRow2, nCol2, nRow2, SC_UPDATE_MARKS ); } else // all in one PaintArea( nCol1, nRow1, nCol2, nRow2, SC_UPDATE_MARKS ); } } void ScTabView::PaintRangeFinder( long nNumber ) { ScInputHandler* pHdl = SC_MOD()->GetInputHdl( aViewData.GetViewShell() ); if (pHdl) { ScRangeFindList* pRangeFinder = pHdl->GetRangeFindList(); if ( pRangeFinder && pRangeFinder->GetDocName() == aViewData.GetDocShell()->GetTitle() ) { SCTAB nTab = aViewData.GetTabNo(); sal_uInt16 nCount = (sal_uInt16)pRangeFinder->Count(); if (nNumber < 0) { for (sal_uInt16 i=0; iGetObject(i),nTab); } else { sal_uInt16 idx = nNumber; if (idx < nCount) PaintRangeFinderEntry(&pRangeFinder->GetObject(idx),nTab); } } } } // for chart data selection void ScTabView::AddHighlightRange( const ScRange& rRange, const Color& rColor ) { maHighlightRanges.push_back( ScHighlightEntry( rRange, rColor ) ); SCTAB nTab = aViewData.GetTabNo(); if ( nTab >= rRange.aStart.Tab() && nTab <= rRange.aEnd.Tab() ) PaintArea( rRange.aStart.Col(), rRange.aStart.Row(), rRange.aEnd.Col(), rRange.aEnd.Row(), SC_UPDATE_MARKS ); } void ScTabView::ClearHighlightRanges() { SCTAB nTab = aViewData.GetTabNo(); std::vector::const_iterator pIter; for ( pIter = maHighlightRanges.begin(); pIter != maHighlightRanges.end(); ++pIter) { ScRange aRange = pIter->aRef; if ( nTab >= aRange.aStart.Tab() && nTab <= aRange.aEnd.Tab() ) PaintArea( aRange.aStart.Col(), aRange.aStart.Row(), aRange.aEnd.Col(), aRange.aEnd.Row(), SC_UPDATE_MARKS ); } maHighlightRanges.clear(); } void ScTabView::DoChartSelection( const uno::Sequence< chart2::data::HighlightedRange > & rHilightRanges ) { ClearHighlightRanges(); const sal_Unicode sep = ::formula::FormulaCompiler::GetNativeSymbolChar(ocSep); for( sal_Int32 i=0; iGetDocument(); if( ScRangeStringConverter::GetRangeListFromString( aRangeList, rHilightRanges[i].RangeRepresentation, &rDoc, rDoc.GetAddressConvention(), sep )) { size_t nListSize = aRangeList.size(); for ( size_t j = 0; j < nListSize; ++j ) { ScRange* p = aRangeList[j]; if( rHilightRanges[i].Index == - 1 ) AddHighlightRange( *p, aSelColor ); else AddHighlightRange( lcl_getSubRangeByIndex( *p, rHilightRanges[i].Index ), aSelColor ); } } } } // PaintGrid - repaint data range void ScTabView::PaintGrid() { sal_uInt16 i; for (i=0; i<4; i++) if (pGridWin[i]) if (pGridWin[i]->IsVisible()) pGridWin[i]->Invalidate(); } // PaintTop - repaint top control elements void ScTabView::PaintTop() { sal_uInt16 i; for (i=0; i<2; i++) { if (pColBar[i]) pColBar[i]->Invalidate(); if (pColOutline[i]) pColOutline[i]->Invalidate(); } } void ScTabView::CreateAnchorHandles(SdrHdlList& rHdl, const ScAddress& rAddress) { sal_uInt16 i; for(i=0; i<4; i++) { if(pGridWin[i]) { if(pGridWin[i]->IsVisible()) { pGridWin[i]->CreateAnchorHandle(rHdl, rAddress); } } } } void ScTabView::PaintTopArea( SCCOL nStartCol, SCCOL nEndCol ) { // pixel position of the left edge if ( nStartCol < aViewData.GetPosX(SC_SPLIT_LEFT) || nStartCol < aViewData.GetPosX(SC_SPLIT_RIGHT) ) aViewData.RecalcPixPos(); // adjust freeze (UpdateFixX resets HSplitPos) if ( aViewData.GetHSplitMode() == SC_SPLIT_FIX && nStartCol < aViewData.GetFixPosX() ) if (aViewData.UpdateFixX()) RepeatResize(); // paint if (nStartCol>0) --nStartCol; //! general ? bool bLayoutRTL = aViewData.GetDocument()->IsLayoutRTL( aViewData.GetTabNo() ); long nLayoutSign = bLayoutRTL ? -1 : 1; for (sal_uInt16 i=0; i<2; i++) { ScHSplitPos eWhich = (ScHSplitPos) i; if (pColBar[eWhich]) { Size aWinSize = pColBar[eWhich]->GetSizePixel(); long nStartX = aViewData.GetScrPos( nStartCol, 0, eWhich ).X(); long nEndX; if (nEndCol >= MAXCOL) nEndX = bLayoutRTL ? 0 : ( aWinSize.Width()-1 ); else nEndX = aViewData.GetScrPos( nEndCol+1, 0, eWhich ).X() - nLayoutSign; pColBar[eWhich]->Invalidate( Rectangle( nStartX, 0, nEndX, aWinSize.Height()-1 ) ); } if (pColOutline[eWhich]) pColOutline[eWhich]->Invalidate(); } } // PaintLeft - repaint left control elements void ScTabView::PaintLeft() { sal_uInt16 i; for (i=0; i<2; i++) { if (pRowBar[i]) pRowBar[i]->Invalidate(); if (pRowOutline[i]) pRowOutline[i]->Invalidate(); } } void ScTabView::PaintLeftArea( SCROW nStartRow, SCROW nEndRow ) { // pixel position of the upper edge if ( nStartRow < aViewData.GetPosY(SC_SPLIT_TOP) || nStartRow < aViewData.GetPosY(SC_SPLIT_BOTTOM) ) aViewData.RecalcPixPos(); // adjust freeze (UpdateFixY reset VSplitPos) if ( aViewData.GetVSplitMode() == SC_SPLIT_FIX && nStartRow < aViewData.GetFixPosY() ) if (aViewData.UpdateFixY()) RepeatResize(); // paint if (nStartRow>0) --nStartRow; for (sal_uInt16 i=0; i<2; i++) { ScVSplitPos eWhich = (ScVSplitPos) i; if (pRowBar[eWhich]) { Size aWinSize = pRowBar[eWhich]->GetSizePixel(); long nStartY = aViewData.GetScrPos( 0, nStartRow, eWhich ).Y(); long nEndY; if (nEndRow >= MAXROW) nEndY = aWinSize.Height()-1; else nEndY = aViewData.GetScrPos( 0, nEndRow+1, eWhich ).Y() - 1; pRowBar[eWhich]->Invalidate( Rectangle( 0, nStartY, aWinSize.Width()-1, nEndY ) ); } if (pRowOutline[eWhich]) pRowOutline[eWhich]->Invalidate(); } } bool ScTabView::PaintExtras() { bool bRet = false; ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); if (!pDoc->HasTable(nTab)) // sheet is deleted? { SCTAB nCount = pDoc->GetTableCount(); aViewData.SetTabNo(nCount-1); bRet = true; } pTabControl->UpdateStatus(); // true = active return bRet; } void ScTabView::RecalcPPT() { // called after changes that require the PPT values to be recalculated // (currently from detective operations) double nOldX = aViewData.GetPPTX(); double nOldY = aViewData.GetPPTY(); aViewData.RefreshZoom(); // pre-calculate new PPT values bool bChangedX = ( aViewData.GetPPTX() != nOldX ); bool bChangedY = ( aViewData.GetPPTY() != nOldY ); if ( bChangedX || bChangedY ) { // call view SetZoom (including draw scale, split update etc) // and paint only if values changed Fraction aZoomX = aViewData.GetZoomX(); Fraction aZoomY = aViewData.GetZoomY(); SetZoom( aZoomX, aZoomY, false ); PaintGrid(); if (bChangedX) PaintTop(); if (bChangedY) PaintLeft(); } } void ScTabView::ActivateView( bool bActivate, bool bFirst ) { if ( bActivate == aViewData.IsActive() && !bFirst ) { // no assertion anymore - occurs when previously in Drag&Drop switching over // to another document return; } // is only called for MDI-(De)Activate // aViewData.Activate behind due to cursor show for KillEditView // don't delete selection - if Activate(false) is set in ViewData, // then the selection is not displayed if (!bActivate) { ScModule* pScMod = SC_MOD(); bool bRefMode = pScMod->IsFormulaMode(); // don't cancel reference input, to allow reference // to other document if (!bRefMode) { // pass view to GetInputHdl, this view may not be current anymore ScInputHandler* pHdl = SC_MOD()->GetInputHdl(aViewData.GetViewShell()); if (pHdl) pHdl->EnterHandler(); } } PaintExtras(); aViewData.Activate(bActivate); PaintBlock(); // repaint, selection after active status if (!bActivate) HideAllCursors(); // Cursor else if (!bFirst) ShowAllCursors(); if (bActivate) { if ( bFirst ) { ScSplitPos eWin = aViewData.GetActivePart(); OSL_ENSURE( pGridWin[eWin], "Corrupted document, not all SplitPos in GridWin" ); if ( !pGridWin[eWin] ) { eWin = SC_SPLIT_BOTTOMLEFT; if ( !pGridWin[eWin] ) { short i; for ( i=0; i<4; i++ ) { if ( pGridWin[i] ) { eWin = (ScSplitPos) i; break; // for } } OSL_ENSURE( i<4, "and BOOM" ); } aViewData.SetActivePart( eWin ); } } // do not call GrabFocus from here! // if the document is processed, then Sfx calls GrabFocus in the window of the shell. // if it is a mail body for instance, then it can't get the focus (Bug #43638#) UpdateInputContext(); } else pGridWin[aViewData.GetActivePart()]->ClickExtern(); } void ScTabView::ActivatePart( ScSplitPos eWhich ) { ScSplitPos eOld = aViewData.GetActivePart(); if ( eOld != eWhich ) { bInActivatePart = true; bool bRefMode = SC_MOD()->IsFormulaMode(); // the HasEditView call during SetCursor would fail otherwise if ( aViewData.HasEditView(eOld) && !bRefMode ) UpdateInputLine(); ScHSplitPos eOldH = WhichH(eOld); ScVSplitPos eOldV = WhichV(eOld); ScHSplitPos eNewH = WhichH(eWhich); ScVSplitPos eNewV = WhichV(eWhich); bool bTopCap = pColBar[eOldH] && pColBar[eOldH]->IsMouseCaptured(); bool bLeftCap = pRowBar[eOldV] && pRowBar[eOldV]->IsMouseCaptured(); bool bFocus = pGridWin[eOld]->HasFocus(); bool bCapture = pGridWin[eOld]->IsMouseCaptured(); if (bCapture) pGridWin[eOld]->ReleaseMouse(); pGridWin[eOld]->ClickExtern(); pGridWin[eOld]->HideCursor(); pGridWin[eWhich]->HideCursor(); aViewData.SetActivePart( eWhich ); ScTabViewShell* pShell = aViewData.GetViewShell(); pShell->WindowChanged(); pSelEngine->SetWindow(pGridWin[eWhich]); pSelEngine->SetWhich(eWhich); pSelEngine->SetVisibleArea( Rectangle(Point(), pGridWin[eWhich]->GetOutputSizePixel()) ); pGridWin[eOld]->MoveMouseStatus(*pGridWin[eWhich]); if ( bCapture || pGridWin[eWhich]->IsMouseCaptured() ) { // tracking instead of CaptureMouse, so it can be cancelled cleanly // (SelectionEngine calls CaptureMouse for SetWindow) //! someday SelectionEngine itself should call StartTracking!?! pGridWin[eWhich]->ReleaseMouse(); pGridWin[eWhich]->StartTracking(); } if ( bTopCap && pColBar[eNewH] ) { pColBar[eOldH]->SetIgnoreMove(true); pColBar[eNewH]->SetIgnoreMove(false); pHdrSelEng->SetWindow( pColBar[eNewH] ); long nWidth = pColBar[eNewH]->GetOutputSizePixel().Width(); pHdrSelEng->SetVisibleArea( Rectangle( 0, LONG_MIN, nWidth-1, LONG_MAX ) ); pColBar[eNewH]->CaptureMouse(); } if ( bLeftCap && pRowBar[eNewV] ) { pRowBar[eOldV]->SetIgnoreMove(true); pRowBar[eNewV]->SetIgnoreMove(false); pHdrSelEng->SetWindow( pRowBar[eNewV] ); long nHeight = pRowBar[eNewV]->GetOutputSizePixel().Height(); pHdrSelEng->SetVisibleArea( Rectangle( LONG_MIN, 0, LONG_MAX, nHeight-1 ) ); pRowBar[eNewV]->CaptureMouse(); } aHdrFunc.SetWhich(eWhich); pGridWin[eOld]->ShowCursor(); pGridWin[eWhich]->ShowCursor(); SfxInPlaceClient* pClient = aViewData.GetViewShell()->GetIPClient(); bool bOleActive = ( pClient && pClient->IsObjectInPlaceActive() ); // don't switch ViewShell's active window during RefInput, because the focus // might change, and subsequent SetReference calls wouldn't find the right EditView if ( !bRefMode && !bOleActive ) aViewData.GetViewShell()->SetWindow( pGridWin[eWhich] ); if ( bFocus && !aViewData.IsAnyFillMode() && !bRefMode ) { // GrabFocus only if previously the other GridWindow had the focus // (for instance due to search and replace) pGridWin[eWhich]->GrabFocus(); } bInActivatePart = false; } } void ScTabView::HideListBox() { for (sal_uInt16 i=0; i<4; i++) if (pGridWin[i]) pGridWin[i]->ClickExtern(); } void ScTabView::UpdateInputContext() { ScGridWindow* pWin = pGridWin[aViewData.GetActivePart()]; if (pWin) pWin->UpdateInputContext(); if (pTabControl) pTabControl->UpdateInputContext(); } // GetGridWidth - width of an output range (for ViewData) long ScTabView::GetGridWidth( ScHSplitPos eWhich ) { ScSplitPos eGridWhich = ( eWhich == SC_SPLIT_LEFT ) ? SC_SPLIT_BOTTOMLEFT : SC_SPLIT_BOTTOMRIGHT; if (pGridWin[eGridWhich]) return pGridWin[eGridWhich]->GetSizePixel().Width(); else return 0; } // GetGridHeight - height of an output range (for ViewData) long ScTabView::GetGridHeight( ScVSplitPos eWhich ) { ScSplitPos eGridWhich = ( eWhich == SC_SPLIT_TOP ) ? SC_SPLIT_TOPLEFT : SC_SPLIT_BOTTOMLEFT; if (pGridWin[eGridWhich]) return pGridWin[eGridWhich]->GetSizePixel().Height(); else return 0; } void ScTabView::UpdateInputLine() { SC_MOD()->InputEnterHandler(); } void ScTabView::ZoomChanged() { ScInputHandler* pHdl = SC_MOD()->GetInputHdl(aViewData.GetViewShell()); if (pHdl) pHdl->SetRefScale( aViewData.GetZoomX(), aViewData.GetZoomY() ); UpdateFixPos(); UpdateScrollBars(); // VisArea... // AW: Discussed with NN if there is a reason that new map mode was only set for one window, // but is not. Setting only on one window causes the first repaint to have the old mapMode // in three of four views, so the overlay will save the wrong content e.g. when zooming out. // Changing to setting map mode at all windows. sal_uInt32 a; for(a = 0L; a < 4L; a++) { if(pGridWin[a]) { pGridWin[a]->SetMapMode(pGridWin[a]->GetDrawMapMode()); } } SetNewVisArea(); InterpretVisible(); // have everything calculated before painting SfxBindings& rBindings = aViewData.GetBindings(); rBindings.Invalidate( SID_ATTR_ZOOM ); rBindings.Invalidate( SID_ATTR_ZOOMSLIDER ); HideNoteMarker(); // AW: To not change too much, use pWin here ScGridWindow* pWin = pGridWin[aViewData.GetActivePart()]; if ( pWin && aViewData.HasEditView( aViewData.GetActivePart() ) ) { // flush OverlayManager before changing the MapMode pWin->flushOverlayManager(); // make sure the EditView's position and size are updated // with the right (logic, not drawing) MapMode pWin->SetMapMode( aViewData.GetLogicMode() ); UpdateEditView(); } } void ScTabView::CheckNeedsRepaint() { sal_uInt16 i; for (i=0; i<4; i++) if ( pGridWin[i] && pGridWin[i]->IsVisible() ) pGridWin[i]->CheckNeedsRepaint(); } bool ScTabView::NeedsRepaint() { for (size_t i = 0; i < 4; i++) if (pGridWin[i] && pGridWin[i]->IsVisible() && pGridWin[i]->NeedsRepaint()) return true; return false; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */