/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <sfx2/app.hxx>

#include "undodat.hxx"
#include "undoutil.hxx"
#include "undoolk.hxx"
#include "document.hxx"
#include "docsh.hxx"
#include "tabvwsh.hxx"
#include "olinetab.hxx"
#include "dbdata.hxx"
#include "rangenam.hxx"
#include "pivot.hxx"
#include "globstr.hrc"
#include "global.hxx"
#include "globalnames.hxx"
#include "target.hxx"
#include "chartarr.hxx"
#include "dbdocfun.hxx"
#include "olinefun.hxx"
#include "dpobject.hxx"
#include "attrib.hxx"
#include "hints.hxx"
#include "sc.hrc"
#include "chgtrack.hxx"
#include "refundo.hxx"
#include "markdata.hxx"


// Show or hide outline groups

ScUndoDoOutline::ScUndoDoOutline( ScDocShell* pNewDocShell,
                            SCCOLROW nNewStart, SCCOLROW nNewEnd, SCTAB nNewTab,
                            ScDocument* pNewUndoDoc, bool bNewColumns,
                            sal_uInt16 nNewLevel, sal_uInt16 nNewEntry, bool bNewShow ) :
    ScSimpleUndo( pNewDocShell ),
    nStart( nNewStart ),
    nEnd( nNewEnd ),
    nTab( nNewTab ),
    pUndoDoc( pNewUndoDoc ),
    bColumns( bNewColumns ),
    nLevel( nNewLevel ),
    nEntry( nNewEntry ),
    bShow( bNewShow )
{
}

ScUndoDoOutline::~ScUndoDoOutline()
{
    delete pUndoDoc;
}

OUString ScUndoDoOutline::GetComment() const
{   // Show outline" "Hide outline"
    return bShow ?
        ScGlobal::GetRscString( STR_UNDO_DOOUTLINE ) :
        ScGlobal::GetRscString( STR_UNDO_REDOOUTLINE );
}

void ScUndoDoOutline::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    // sheet has to be switched over (#46952#)!

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    // perform the inverse function

    if (bShow)
        pViewShell->HideOutline( bColumns, nLevel, nEntry, false, false );
    else
        pViewShell->ShowOutline( bColumns, nLevel, nEntry, false, false );

    //  Original column/row status
    if (bColumns)
        pUndoDoc->CopyToDocument( static_cast<SCCOL>(nStart), 0, nTab,
                static_cast<SCCOL>(nEnd), MAXROW, nTab, InsertDeleteFlags::NONE, false, &rDoc);
    else
        pUndoDoc->CopyToDocument( 0, nStart, nTab, MAXCOL, nEnd, nTab, InsertDeleteFlags::NONE, false, &rDoc );

    pViewShell->UpdateScrollBars();

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP);

    EndUndo();
}

void ScUndoDoOutline::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    // sheet has to be switched over (#46952#)!

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    if (bShow)
        pViewShell->ShowOutline( bColumns, nLevel, nEntry, false );
    else
        pViewShell->HideOutline( bColumns, nLevel, nEntry, false );

    EndRedo();
}

void ScUndoDoOutline::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoDoOutline::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;                       // is not possible
}

/** Make or delete outline groups */
ScUndoMakeOutline::ScUndoMakeOutline( ScDocShell* pNewDocShell,
                            SCCOL nStartX, SCROW nStartY, SCTAB nStartZ,
                            SCCOL nEndX, SCROW nEndY, SCTAB nEndZ,
                            ScOutlineTable* pNewUndoTab, bool bNewColumns, bool bNewMake ) :
    ScSimpleUndo( pNewDocShell ),
    aBlockStart( nStartX, nStartY, nStartZ ),
    aBlockEnd( nEndX, nEndY, nEndZ ),
    pUndoTable( pNewUndoTab ),
    bColumns( bNewColumns ),
    bMake( bNewMake )
{
}

ScUndoMakeOutline::~ScUndoMakeOutline()
{
    delete pUndoTable;
}

OUString ScUndoMakeOutline::GetComment() const
{   // "Grouping" "Undo grouping"
    return bMake ?
        ScGlobal::GetRscString( STR_UNDO_MAKEOUTLINE ) :
        ScGlobal::GetRscString( STR_UNDO_REMAKEOUTLINE );
}

void ScUndoMakeOutline::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    SCTAB nTab = aBlockStart.Tab();

    ScUndoUtil::MarkSimpleBlock( pDocShell, aBlockStart, aBlockEnd );

    rDoc.SetOutlineTable( nTab, pUndoTable );

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP|PAINT_SIZE);

    EndUndo();
}

void ScUndoMakeOutline::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    ScUndoUtil::MarkSimpleBlock( pDocShell, aBlockStart, aBlockEnd );

    if (bMake)
        pViewShell->MakeOutline( bColumns, false );
    else
        pViewShell->RemoveOutline( bColumns, false );

    pDocShell->PostPaint(0,0,aBlockStart.Tab(),MAXCOL,MAXROW,aBlockEnd.Tab(),PAINT_GRID);

    EndRedo();
}

void ScUndoMakeOutline::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
    {
        ScTabViewShell& rViewShell = *static_cast<ScTabViewTarget&>(rTarget).GetViewShell();

        if (bMake)
            rViewShell.MakeOutline( bColumns );
        else
            rViewShell.RemoveOutline( bColumns );
    }
}

bool ScUndoMakeOutline::CanRepeat(SfxRepeatTarget& rTarget) const
{
    return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
}

ScUndoOutlineLevel::ScUndoOutlineLevel( ScDocShell* pNewDocShell,
                        SCCOLROW nNewStart, SCCOLROW nNewEnd, SCTAB nNewTab,
                        ScDocument* pNewUndoDoc, ScOutlineTable* pNewUndoTab,
                        bool bNewColumns, sal_uInt16 nNewLevel ) :
    ScSimpleUndo( pNewDocShell ),
    nStart( nNewStart ),
    nEnd( nNewEnd ),
    nTab( nNewTab ),
    pUndoDoc( pNewUndoDoc ),
    pUndoTable( pNewUndoTab ),
    bColumns( bNewColumns ),
    nLevel( nNewLevel )
{
}

ScUndoOutlineLevel::~ScUndoOutlineLevel()
{
    delete pUndoDoc;
    delete pUndoTable;
}

OUString ScUndoOutlineLevel::GetComment() const
{   // "Select outline level"
    return ScGlobal::GetRscString( STR_UNDO_OUTLINELEVEL );
}

void ScUndoOutlineLevel::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    //  Original Outline table

    rDoc.SetOutlineTable( nTab, pUndoTable );

    //  Original column/row status

    if (bColumns)
        pUndoDoc->CopyToDocument( static_cast<SCCOL>(nStart), 0, nTab,
                static_cast<SCCOL>(nEnd), MAXROW, nTab, InsertDeleteFlags::NONE, false, &rDoc);
    else
        pUndoDoc->CopyToDocument( 0, nStart, nTab, MAXCOL, nEnd, nTab, InsertDeleteFlags::NONE, false, &rDoc );

    rDoc.UpdatePageBreaks( nTab );

    pViewShell->UpdateScrollBars();

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP);

    EndUndo();
}

void ScUndoOutlineLevel::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    // sheet has to be switched on or off before this (#46952#) !!!

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pViewShell->SelectLevel( bColumns, nLevel, false );

    EndRedo();
}

void ScUndoOutlineLevel::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
        static_cast<ScTabViewTarget&>(rTarget).GetViewShell()->SelectLevel( bColumns, nLevel );
}

bool ScUndoOutlineLevel::CanRepeat(SfxRepeatTarget& rTarget) const
{
    return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
}

/** show/hide outline over block marks */
ScUndoOutlineBlock::ScUndoOutlineBlock( ScDocShell* pNewDocShell,
                        SCCOL nStartX, SCROW nStartY, SCTAB nStartZ,
                        SCCOL nEndX, SCROW nEndY, SCTAB nEndZ,
                        ScDocument* pNewUndoDoc, ScOutlineTable* pNewUndoTab, bool bNewShow ) :
    ScSimpleUndo( pNewDocShell ),
    aBlockStart( nStartX, nStartY, nStartZ ),
    aBlockEnd( nEndX, nEndY, nEndZ ),
    pUndoDoc( pNewUndoDoc ),
    pUndoTable( pNewUndoTab ),
    bShow( bNewShow )
{
}

ScUndoOutlineBlock::~ScUndoOutlineBlock()
{
    delete pUndoDoc;
    delete pUndoTable;
}

OUString ScUndoOutlineBlock::GetComment() const
{   // "Show outline" "Hide outline"
    return bShow ?
        ScGlobal::GetRscString( STR_UNDO_DOOUTLINEBLK ) :
        ScGlobal::GetRscString( STR_UNDO_REDOOUTLINEBLK );
}

void ScUndoOutlineBlock::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    SCTAB nTab = aBlockStart.Tab();

    //  Original Outline table
    rDoc.SetOutlineTable( nTab, pUndoTable );

    //  Original column/row status
    SCCOLROW    nStartCol = aBlockStart.Col();
    SCCOLROW    nEndCol = aBlockEnd.Col();
    SCCOLROW    nStartRow = aBlockStart.Row();
    SCCOLROW    nEndRow = aBlockEnd.Row();

    if (!bShow)
    {                               // Size of the hidden blocks
        size_t nLevel;
        pUndoTable->GetColArray().FindTouchedLevel( nStartCol, nEndCol, nLevel );
        pUndoTable->GetColArray().ExtendBlock( nLevel, nStartCol, nEndCol );
        pUndoTable->GetRowArray().FindTouchedLevel( nStartRow, nEndRow, nLevel );
        pUndoTable->GetRowArray().ExtendBlock( nLevel, nStartRow, nEndRow );
    }

    pUndoDoc->CopyToDocument( static_cast<SCCOL>(nStartCol), 0, nTab,
            static_cast<SCCOL>(nEndCol), MAXROW, nTab, InsertDeleteFlags::NONE, false, &rDoc );
    pUndoDoc->CopyToDocument( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab, InsertDeleteFlags::NONE, false, &rDoc );

    rDoc.UpdatePageBreaks( nTab );

    pViewShell->UpdateScrollBars();

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP);

    EndUndo();
}

void ScUndoOutlineBlock::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    ScUndoUtil::MarkSimpleBlock( pDocShell, aBlockStart, aBlockEnd );
    if (bShow)
        pViewShell->ShowMarkedOutlines( false );
    else
        pViewShell->HideMarkedOutlines( false );

    EndRedo();
}

void ScUndoOutlineBlock::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
    {
        ScTabViewShell& rViewShell = *static_cast<ScTabViewTarget&>(rTarget).GetViewShell();

        if (bShow)
            rViewShell.ShowMarkedOutlines();
        else
            rViewShell.HideMarkedOutlines();
    }
}

bool ScUndoOutlineBlock::CanRepeat(SfxRepeatTarget& rTarget) const
{
    return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
}

ScUndoRemoveAllOutlines::ScUndoRemoveAllOutlines( ScDocShell* pNewDocShell,
                                    SCCOL nStartX, SCROW nStartY, SCTAB nStartZ,
                                    SCCOL nEndX, SCROW nEndY, SCTAB nEndZ,
                                    ScDocument* pNewUndoDoc, ScOutlineTable* pNewUndoTab ) :
    ScSimpleUndo( pNewDocShell ),
    aBlockStart( nStartX, nStartY, nStartZ ),
    aBlockEnd( nEndX, nEndY, nEndZ ),
    pUndoDoc( pNewUndoDoc ),
    pUndoTable( pNewUndoTab )
{
}

ScUndoRemoveAllOutlines::~ScUndoRemoveAllOutlines()
{
    delete pUndoDoc;
    delete pUndoTable;
}

OUString ScUndoRemoveAllOutlines::GetComment() const
{   // "Remove outlines"
    return ScGlobal::GetRscString( STR_UNDO_REMOVEALLOTLNS );
}

void ScUndoRemoveAllOutlines::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    SCTAB nTab = aBlockStart.Tab();

    //  Original Outline table
    rDoc.SetOutlineTable( nTab, pUndoTable );

    //  Original column/row status
    SCCOL   nStartCol = aBlockStart.Col();
    SCCOL   nEndCol = aBlockEnd.Col();
    SCROW   nStartRow = aBlockStart.Row();
    SCROW   nEndRow = aBlockEnd.Row();

    pUndoDoc->CopyToDocument( nStartCol, 0, nTab, nEndCol, MAXROW, nTab, InsertDeleteFlags::NONE, false, &rDoc );
    pUndoDoc->CopyToDocument( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab, InsertDeleteFlags::NONE, false, &rDoc );

    rDoc.UpdatePageBreaks( nTab );

    pViewShell->UpdateScrollBars();

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP|PAINT_SIZE);

    EndUndo();
}

void ScUndoRemoveAllOutlines::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    // sheet has to be switched over (#46952#)!

    SCTAB nTab = aBlockStart.Tab();
    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pViewShell->RemoveAllOutlines( false );

    EndRedo();
}

void ScUndoRemoveAllOutlines::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
        static_cast<ScTabViewTarget&>(rTarget).GetViewShell()->RemoveAllOutlines();
}

bool ScUndoRemoveAllOutlines::CanRepeat(SfxRepeatTarget& rTarget) const
{
    return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
}

ScUndoAutoOutline::ScUndoAutoOutline( ScDocShell* pNewDocShell,
                                    SCCOL nStartX, SCROW nStartY, SCTAB nStartZ,
                                    SCCOL nEndX, SCROW nEndY, SCTAB nEndZ,
                                    ScDocument* pNewUndoDoc, ScOutlineTable* pNewUndoTab ) :
    ScSimpleUndo( pNewDocShell ),
    aBlockStart( nStartX, nStartY, nStartZ ),
    aBlockEnd( nEndX, nEndY, nEndZ ),
    pUndoDoc( pNewUndoDoc ),
    pUndoTable( pNewUndoTab )
{
}

ScUndoAutoOutline::~ScUndoAutoOutline()
{
    delete pUndoDoc;
    delete pUndoTable;
}

OUString ScUndoAutoOutline::GetComment() const
{
    return ScGlobal::GetRscString( STR_UNDO_AUTOOUTLINE );
}

void ScUndoAutoOutline::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    SCTAB nTab = aBlockStart.Tab();

    // Original outline table
    rDoc.SetOutlineTable( nTab, pUndoTable );

    // Original column/row status
    if (pUndoDoc && pUndoTable)
    {
        SCCOLROW nStartCol;
        SCCOLROW nStartRow;
        SCCOLROW nEndCol;
        SCCOLROW nEndRow;
        pUndoTable->GetColArray().GetRange( nStartCol, nEndCol );
        pUndoTable->GetRowArray().GetRange( nStartRow, nEndRow );

        pUndoDoc->CopyToDocument( static_cast<SCCOL>(nStartCol), 0, nTab,
                static_cast<SCCOL>(nEndCol), MAXROW, nTab, InsertDeleteFlags::NONE, false,
                &rDoc);
        pUndoDoc->CopyToDocument( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab, InsertDeleteFlags::NONE, false, &rDoc );

        pViewShell->UpdateScrollBars();
    }

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP|PAINT_SIZE);

    EndUndo();
}

void ScUndoAutoOutline::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    SCTAB nTab = aBlockStart.Tab();
    if (pViewShell)
    {
        // sheet has to be switched on or off before this (#46952#) !!!

        SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
        if ( nVisTab != nTab )
            pViewShell->SetTabNo( nTab );
    }

    ScRange aRange( aBlockStart.Col(), aBlockStart.Row(), nTab,
                    aBlockEnd.Col(),   aBlockEnd.Row(),   nTab );
    ScOutlineDocFunc aFunc( *pDocShell );
    aFunc.AutoOutline( aRange, false );

    //  Select in View
    //  If it was called with a multi selection,
    //  then this is now the enclosing range...

    if (pViewShell)
        pViewShell->MarkRange( aRange );

    EndRedo();
}

void ScUndoAutoOutline::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
        static_cast<ScTabViewTarget&>(rTarget).GetViewShell()->AutoOutline();
}

bool ScUndoAutoOutline::CanRepeat(SfxRepeatTarget& rTarget) const
{
    return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
}

ScUndoSubTotals::ScUndoSubTotals( ScDocShell* pNewDocShell, SCTAB nNewTab,
                                const ScSubTotalParam& rNewParam, SCROW nNewEndY,
                                ScDocument* pNewUndoDoc, ScOutlineTable* pNewUndoTab,
                                ScRangeName* pNewUndoRange, ScDBCollection* pNewUndoDB ) :
    ScDBFuncUndo( pNewDocShell, ScRange( rNewParam.nCol1, rNewParam.nRow1, nNewTab,
                                         rNewParam.nCol2, rNewParam.nRow2, nNewTab ) ),
    nTab( nNewTab ),
    aParam( rNewParam ),
    nNewEndRow( nNewEndY ),
    pUndoDoc( pNewUndoDoc ),
    pUndoTable( pNewUndoTab ),
    pUndoRange( pNewUndoRange ),
    pUndoDB( pNewUndoDB )
{
}

ScUndoSubTotals::~ScUndoSubTotals()
{
    delete pUndoDoc;
    delete pUndoTable;
    delete pUndoRange;
    delete pUndoDB;
}

OUString ScUndoSubTotals::GetComment() const
{   // "Subtotals"
    return ScGlobal::GetRscString( STR_UNDO_SUBTOTALS );
}

void ScUndoSubTotals::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    if (nNewEndRow > aParam.nRow2)
    {
        rDoc.DeleteRow( 0,nTab, MAXCOL,nTab, aParam.nRow2+1, static_cast<SCSIZE>(nNewEndRow-aParam.nRow2) );
    }
    else if (nNewEndRow < aParam.nRow2)
    {
        rDoc.InsertRow( 0,nTab, MAXCOL,nTab, nNewEndRow+1, static_cast<SCSIZE>(aParam.nRow2-nNewEndRow) );
    }

    // Original Outline table
    rDoc.SetOutlineTable( nTab, pUndoTable );

    // Original column/row status
    if (pUndoTable)
    {
        SCCOLROW nStartCol;
        SCCOLROW nStartRow;
        SCCOLROW nEndCol;
        SCCOLROW nEndRow;
        pUndoTable->GetColArray().GetRange( nStartCol, nEndCol );
        pUndoTable->GetRowArray().GetRange( nStartRow, nEndRow );

        pUndoDoc->CopyToDocument( static_cast<SCCOL>(nStartCol), 0, nTab,
                static_cast<SCCOL>(nEndCol), MAXROW, nTab, InsertDeleteFlags::NONE, false,
                &rDoc);
        pUndoDoc->CopyToDocument( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab, InsertDeleteFlags::NONE, false, &rDoc );

        pViewShell->UpdateScrollBars();
    }

    //  Original data and references

    ScUndoUtil::MarkSimpleBlock( pDocShell, 0, aParam.nRow1+1, nTab,
                                            MAXCOL, aParam.nRow2, nTab );

    rDoc.DeleteAreaTab( 0,aParam.nRow1+1, MAXCOL,aParam.nRow2, nTab, InsertDeleteFlags::ALL );

    pUndoDoc->CopyToDocument( 0, aParam.nRow1+1, nTab, MAXCOL, aParam.nRow2, nTab,
                                                            InsertDeleteFlags::NONE, false, &rDoc );    // Flags
    pUndoDoc->UndoToDocument( 0, aParam.nRow1+1, nTab, MAXCOL, aParam.nRow2, nTab,
                                                            InsertDeleteFlags::ALL, false, &rDoc );

    ScUndoUtil::MarkSimpleBlock( pDocShell, aParam.nCol1,aParam.nRow1,nTab,
                                            aParam.nCol2,aParam.nRow2,nTab );

    if (pUndoRange)
        rDoc.SetRangeName( new ScRangeName( *pUndoRange ) );
    if (pUndoDB)
        rDoc.SetDBCollection( new ScDBCollection( *pUndoDB ), true );

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP|PAINT_SIZE);
    pDocShell->PostDataChanged();

    EndUndo();
}

void ScUndoSubTotals::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    ScUndoUtil::MarkSimpleBlock( pDocShell, aParam.nCol1,aParam.nRow1,nTab,
                                            aParam.nCol2,aParam.nRow2,nTab );
    pViewShell->DoSubTotals( aParam, false );

    EndRedo();
}

void ScUndoSubTotals::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoSubTotals::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;     // is not possible due to column numbers
}

ScUndoQuery::ScUndoQuery( ScDocShell* pNewDocShell, SCTAB nNewTab, const ScQueryParam& rParam,
                            ScDocument* pNewUndoDoc, ScDBCollection* pNewUndoDB,
                            const ScRange* pOld, bool bSize, const ScRange* pAdvSrc ) :
    ScDBFuncUndo( pNewDocShell, ScRange( rParam.nCol1, rParam.nRow1, nNewTab,
                                         rParam.nCol2, rParam.nRow2, nNewTab ) ),
    pDrawUndo( nullptr ),
    nTab( nNewTab ),
    aQueryParam( rParam ),
    pUndoDoc( pNewUndoDoc ),
    pUndoDB( pNewUndoDB ),
    bIsAdvanced( false ),
    bDestArea( false ),
    bDoSize( bSize )
{
    if ( pOld )
    {
        bDestArea = true;
        aOldDest = *pOld;
    }
    if ( pAdvSrc )
    {
        bIsAdvanced = true;
        aAdvSource = *pAdvSrc;
    }

    pDrawUndo = GetSdrUndoAction( &pDocShell->GetDocument() );
}

ScUndoQuery::~ScUndoQuery()
{
    delete pUndoDoc;
    delete pUndoDB;
    DeleteSdrUndoAction( pDrawUndo );
}

OUString ScUndoQuery::GetComment() const
{   // "Filter";
    return ScGlobal::GetRscString( STR_UNDO_QUERY );
}

void ScUndoQuery::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    bool bCopy = !aQueryParam.bInplace;
    SCCOL nDestEndCol = 0;
    SCROW nDestEndRow = 0;
    if (bCopy)
    {
        nDestEndCol = aQueryParam.nDestCol + ( aQueryParam.nCol2-aQueryParam.nCol1 );
        nDestEndRow = aQueryParam.nDestRow + ( aQueryParam.nRow2-aQueryParam.nRow1 );

        ScDBData* pData = rDoc.GetDBAtCursor( aQueryParam.nDestCol, aQueryParam.nDestRow,
                                                aQueryParam.nDestTab, ScDBDataPortion::TOP_LEFT );
        if (pData)
        {
            ScRange aNewDest;
            pData->GetArea( aNewDest );
            nDestEndCol = aNewDest.aEnd.Col();
            nDestEndRow = aNewDest.aEnd.Row();
        }

        if ( bDoSize && bDestArea )
        {
            //  aDestRange is the old range
            rDoc.FitBlock( ScRange(
                                aQueryParam.nDestCol, aQueryParam.nDestRow, aQueryParam.nDestTab,
                                nDestEndCol, nDestEndRow, aQueryParam.nDestTab ),
                            aOldDest );
        }

        ScUndoUtil::MarkSimpleBlock( pDocShell,
                                    aQueryParam.nDestCol, aQueryParam.nDestRow, aQueryParam.nDestTab,
                                    nDestEndCol, nDestEndRow, aQueryParam.nDestTab );
        rDoc.DeleteAreaTab( aQueryParam.nDestCol, aQueryParam.nDestRow,
                            nDestEndCol, nDestEndRow, aQueryParam.nDestTab, InsertDeleteFlags::ALL );

        pViewShell->DoneBlockMode();

        pUndoDoc->CopyToDocument( aQueryParam.nDestCol, aQueryParam.nDestRow, aQueryParam.nDestTab,
                                    nDestEndCol, nDestEndRow, aQueryParam.nDestTab,
                                    InsertDeleteFlags::ALL, false, &rDoc );
        //  Attributes are always copied (#49287#)

        // rest of the old range
        if ( bDestArea && !bDoSize )
        {
            rDoc.DeleteAreaTab( aOldDest, InsertDeleteFlags::ALL );
            pUndoDoc->CopyToDocument( aOldDest, InsertDeleteFlags::ALL, false, &rDoc );
        }
    }
    else
        pUndoDoc->CopyToDocument( 0, aQueryParam.nRow1, nTab, MAXCOL, aQueryParam.nRow2, nTab,
                                        InsertDeleteFlags::NONE, false, &rDoc );

    if (pUndoDB)
        rDoc.SetDBCollection( new ScDBCollection( *pUndoDB ), true );

    if (!bCopy)
    {
        rDoc.InvalidatePageBreaks(nTab);
        rDoc.UpdatePageBreaks( nTab );
    }

    ScRange aDirtyRange( 0 , aQueryParam.nRow1, nTab,
        MAXCOL, aQueryParam.nRow2, nTab );
    rDoc.SetDirty( aDirtyRange, true );

    DoSdrUndoAction( pDrawUndo, &rDoc );

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

        //  Paint

    if (bCopy)
    {
        SCCOL nEndX = nDestEndCol;
        SCROW nEndY = nDestEndRow;
        if (bDestArea)
        {
            if ( aOldDest.aEnd.Col() > nEndX )
                nEndX = aOldDest.aEnd.Col();
            if ( aOldDest.aEnd.Row() > nEndY )
                nEndY = aOldDest.aEnd.Row();
        }
        if (bDoSize)
            nEndY = MAXROW;
        pDocShell->PostPaint( aQueryParam.nDestCol, aQueryParam.nDestRow, aQueryParam.nDestTab,
                                    nEndX, nEndY, aQueryParam.nDestTab, PAINT_GRID );
    }
    else
        pDocShell->PostPaint( 0, aQueryParam.nRow1, nTab, MAXCOL, MAXROW, nTab,
                                                    PAINT_GRID | PAINT_LEFT );
    pDocShell->PostDataChanged();

    EndUndo();
}

void ScUndoQuery::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    if ( bIsAdvanced )
        pViewShell->Query( aQueryParam, &aAdvSource, false );
    else
        pViewShell->Query( aQueryParam, nullptr, false );

    EndRedo();
}

void ScUndoQuery::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoQuery::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;    // does not work due to column numbers
}

//      Show or hide AutoFilter buttons (doesn't include filter settings)

ScUndoAutoFilter::ScUndoAutoFilter( ScDocShell* pNewDocShell, const ScRange& rRange,
                                    const OUString& rName, bool bSet ) :
    ScDBFuncUndo( pNewDocShell, rRange ),
    aDBName( rName ),
    bFilterSet( bSet )
{
}

ScUndoAutoFilter::~ScUndoAutoFilter()
{
}

OUString ScUndoAutoFilter::GetComment() const
{
    return ScGlobal::GetRscString( STR_UNDO_QUERY );    // same as ScUndoQuery
}

void ScUndoAutoFilter::DoChange( bool bUndo )
{
    bool bNewFilter = bUndo ? !bFilterSet : bFilterSet;

    ScDocument& rDoc = pDocShell->GetDocument();
    ScDBData* pDBData=nullptr;
    if (aDBName == STR_DB_LOCAL_NONAME)
    {
        SCTAB nTab = aOriginalRange.aStart.Tab();
        pDBData = rDoc.GetAnonymousDBData(nTab);
    }
    else
    {
        ScDBCollection* pColl = rDoc.GetDBCollection();
        pDBData = pColl->getNamedDBs().findByUpperName(ScGlobal::pCharClass->uppercase(aDBName));
    }

    if ( pDBData )
    {
        pDBData->SetAutoFilter( bNewFilter );

        SCCOL nRangeX1;
        SCROW nRangeY1;
        SCCOL nRangeX2;
        SCROW nRangeY2;
        SCTAB nRangeTab;
        pDBData->GetArea( nRangeTab, nRangeX1, nRangeY1, nRangeX2, nRangeY2 );

        if ( bNewFilter )
            rDoc.ApplyFlagsTab( nRangeX1, nRangeY1, nRangeX2, nRangeY1, nRangeTab, SC_MF_AUTO );
        else
            rDoc.RemoveFlagsTab( nRangeX1, nRangeY1, nRangeX2, nRangeY1, nRangeTab, SC_MF_AUTO );

        pDocShell->PostPaint( nRangeX1, nRangeY1, nRangeTab, nRangeX2, nRangeY1, nRangeTab, PAINT_GRID );
    }
}

void ScUndoAutoFilter::Undo()
{
    BeginUndo();
    DoChange( true );
    EndUndo();
}

void ScUndoAutoFilter::Redo()
{
    BeginRedo();
    DoChange( false );
    EndRedo();
}

void ScUndoAutoFilter::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoAutoFilter::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;
}

// change database sections (dialog)
ScUndoDBData::ScUndoDBData( ScDocShell* pNewDocShell,
                            ScDBCollection* pNewUndoColl, ScDBCollection* pNewRedoColl ) :
    ScSimpleUndo( pNewDocShell ),
    pUndoColl( pNewUndoColl ),
    pRedoColl( pNewRedoColl )
{
}

ScUndoDBData::~ScUndoDBData()
{
    delete pUndoColl;
    delete pRedoColl;
}

OUString ScUndoDBData::GetComment() const
{   // "Change database range";
    return ScGlobal::GetRscString( STR_UNDO_DBDATA );
}

void ScUndoDBData::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();

    bool bOldAutoCalc = rDoc.GetAutoCalc();
    rDoc.SetAutoCalc( false );         // Avoid unnecessary calculations
    rDoc.PreprocessDBDataUpdate();
    rDoc.SetDBCollection( new ScDBCollection(*pUndoColl), true );
    rDoc.CompileHybridFormula();
    rDoc.SetAutoCalc( bOldAutoCalc );

    SfxGetpApp()->Broadcast( SfxSimpleHint( SC_HINT_DBAREAS_CHANGED ) );

    EndUndo();
}

void ScUndoDBData::Redo()
{
    BeginRedo();

    ScDocument& rDoc = pDocShell->GetDocument();

    bool bOldAutoCalc = rDoc.GetAutoCalc();
    rDoc.SetAutoCalc( false );         // Avoid unnecessary calculations
    rDoc.PreprocessDBDataUpdate();
    rDoc.SetDBCollection( new ScDBCollection(*pRedoColl), true );
    rDoc.CompileHybridFormula();
    rDoc.SetAutoCalc( bOldAutoCalc );

    SfxGetpApp()->Broadcast( SfxSimpleHint( SC_HINT_DBAREAS_CHANGED ) );

    EndRedo();
}

void ScUndoDBData::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoDBData::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;    // is not possible
}

ScUndoImportData::ScUndoImportData( ScDocShell* pNewDocShell, SCTAB nNewTab,
                                const ScImportParam& rParam, SCCOL nNewEndX, SCROW nNewEndY,
                                SCCOL nNewFormula,
                                ScDocument* pNewUndoDoc, ScDocument* pNewRedoDoc,
                                ScDBData* pNewUndoData, ScDBData* pNewRedoData ) :
    ScSimpleUndo( pNewDocShell ),
    nTab( nNewTab ),
    aImportParam( rParam ),
    nEndCol( nNewEndX ),
    nEndRow( nNewEndY ),
    pUndoDoc( pNewUndoDoc ),
    pRedoDoc( pNewRedoDoc ),
    pUndoDBData( pNewUndoData ),
    pRedoDBData( pNewRedoData ),
    nFormulaCols( nNewFormula ),
    bRedoFilled( false )
{
    // redo doc doesn't contain imported data (but everything else)
}

ScUndoImportData::~ScUndoImportData()
{
    delete pUndoDoc;
    delete pRedoDoc;
    delete pUndoDBData;
    delete pRedoDBData;
}

OUString ScUndoImportData::GetComment() const
{
    return ScGlobal::GetRscString( STR_UNDO_IMPORTDATA );
}

void ScUndoImportData::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    ScUndoUtil::MarkSimpleBlock( pDocShell, aImportParam.nCol1,aImportParam.nRow1,nTab,
                                                        nEndCol,nEndRow,nTab );

    SCTAB nTable;
    SCCOL nCol1, nCol2;
    SCROW nRow1, nRow2;
    ScDBData* pCurrentData = nullptr;
    if (pUndoDBData && pRedoDBData)
    {
        pRedoDBData->GetArea( nTable, nCol1, nRow1, nCol2, nRow2 );
        pCurrentData = ScUndoUtil::GetOldDBData( pRedoDBData, &rDoc, nTab,
                                                    nCol1, nRow1, nCol2, nRow2 );

        if ( !bRedoFilled )
        {
            //  read redo data from document at first undo
            //  imported data is deleted later anyway,
            //  so now delete each column after copying to save memory (#41216#)

            bool bOldAutoCalc = rDoc.GetAutoCalc();
            rDoc.SetAutoCalc( false );             // outside of the loop
            for (SCCOL nCopyCol = nCol1; nCopyCol <= nCol2; nCopyCol++)
            {
                rDoc.CopyToDocument( nCopyCol,nRow1,nTab, nCopyCol,nRow2,nTab,
                                        InsertDeleteFlags::CONTENTS & ~InsertDeleteFlags::NOTE, false, pRedoDoc );
                rDoc.DeleteAreaTab( nCopyCol,nRow1, nCopyCol,nRow2, nTab, InsertDeleteFlags::CONTENTS & ~InsertDeleteFlags::NOTE );
            }
            rDoc.SetAutoCalc( bOldAutoCalc );
            bRedoFilled = true;
        }
    }
    bool bMoveCells = pUndoDBData && pRedoDBData &&
                        pRedoDBData->IsDoSize();        // the same in old and new
    if (bMoveCells)
    {
        //  Undo: first delete the new data, then FitBlock backwards

        ScRange aOld, aNew;
        pUndoDBData->GetArea( aOld );
        pRedoDBData->GetArea( aNew );

        rDoc.DeleteAreaTab( aNew.aStart.Col(), aNew.aStart.Row(),
                                aNew.aEnd.Col(), aNew.aEnd.Row(), nTab, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE );

        aOld.aEnd.SetCol( aOld.aEnd.Col() + nFormulaCols );     // FitBlock also for formulas
        aNew.aEnd.SetCol( aNew.aEnd.Col() + nFormulaCols );
        rDoc.FitBlock( aNew, aOld, false );                    // backwards
    }
    else
        rDoc.DeleteAreaTab( aImportParam.nCol1,aImportParam.nRow1,
                                nEndCol,nEndRow, nTab, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE );

    pUndoDoc->CopyToDocument( aImportParam.nCol1,aImportParam.nRow1,nTab,
                                nEndCol+nFormulaCols,nEndRow,nTab,
                                InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE, false, &rDoc );

    if (pCurrentData)
    {
        *pCurrentData = *pUndoDBData;

        pUndoDBData->GetArea( nTable, nCol1, nRow1, nCol2, nRow2 );
        ScUndoUtil::MarkSimpleBlock( pDocShell, nCol1, nRow1, nTable, nCol2, nRow2, nTable );
    }

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    if (bMoveCells)
        pDocShell->PostPaint( 0,0,nTab, MAXCOL,MAXROW,nTab, PAINT_GRID );
    else
        pDocShell->PostPaint( aImportParam.nCol1,aImportParam.nRow1,nTab,
                                nEndCol,nEndRow,nTab, PAINT_GRID );
    pDocShell->PostDataChanged();

    EndUndo();
}

void ScUndoImportData::Redo()
{
    BeginRedo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    ScUndoUtil::MarkSimpleBlock( pDocShell, aImportParam.nCol1,aImportParam.nRow1,nTab,
                                                        nEndCol,nEndRow,nTab );

    SCTAB nTable;
    SCCOL nCol1, nCol2;
    SCROW nRow1, nRow2;
    ScDBData* pCurrentData = nullptr;
    if (pUndoDBData && pRedoDBData)
    {
        pUndoDBData->GetArea( nTable, nCol1, nRow1, nCol2, nRow2 );
        pCurrentData = ScUndoUtil::GetOldDBData( pUndoDBData, &rDoc, nTab,
                                                    nCol1, nRow1, nCol2, nRow2 );
    }
    bool bMoveCells = pUndoDBData && pRedoDBData &&
                        pRedoDBData->IsDoSize();        // the same in old and new
    if (bMoveCells)
    {
        //  Redo: FitBlock, then delete data (needed for CopyToDocument)

        ScRange aOld, aNew;
        pUndoDBData->GetArea( aOld );
        pRedoDBData->GetArea( aNew );

        aOld.aEnd.SetCol( aOld.aEnd.Col() + nFormulaCols );     // FitBlock also for formulas
        aNew.aEnd.SetCol( aNew.aEnd.Col() + nFormulaCols );
        rDoc.FitBlock( aOld, aNew );

        rDoc.DeleteAreaTab( aNew.aStart.Col(), aNew.aStart.Row(),
                                aNew.aEnd.Col(), aNew.aEnd.Row(), nTab, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE );

        pRedoDoc->CopyToDocument( aNew, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE, false, &rDoc );        // including formulas
    }
    else
    {
        rDoc.DeleteAreaTab( aImportParam.nCol1,aImportParam.nRow1,
                                nEndCol,nEndRow, nTab, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE );
        pRedoDoc->CopyToDocument( aImportParam.nCol1,aImportParam.nRow1,nTab,
                                nEndCol,nEndRow,nTab, InsertDeleteFlags::ALL & ~InsertDeleteFlags::NOTE, false, &rDoc );
    }

    if (pCurrentData)
    {
        *pCurrentData = *pRedoDBData;

        pRedoDBData->GetArea( nTable, nCol1, nRow1, nCol2, nRow2 );
        ScUndoUtil::MarkSimpleBlock( pDocShell, nCol1, nRow1, nTable, nCol2, nRow2, nTable );
    }

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    if (bMoveCells)
        pDocShell->PostPaint( 0,0,nTab, MAXCOL,MAXROW,nTab, PAINT_GRID );
    else
        pDocShell->PostPaint( aImportParam.nCol1,aImportParam.nRow1,nTab,
                                nEndCol,nEndRow,nTab, PAINT_GRID );
    pDocShell->PostDataChanged();

    EndRedo();
}

void ScUndoImportData::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
    {
        ScTabViewShell& rViewShell = *static_cast<ScTabViewTarget&>(rTarget).GetViewShell();

        SCTAB nDummy;
        ScImportParam aNewParam(aImportParam);
        ScDBData* pDBData = rViewShell.GetDBData();
        pDBData->GetArea( nDummy, aNewParam.nCol1,aNewParam.nRow1, aNewParam.nCol2,aNewParam.nRow2 );

        rViewShell.ImportData( aNewParam );
    }
}

bool ScUndoImportData::CanRepeat(SfxRepeatTarget& rTarget) const
{
    //  Repeat only for import using a database range, then pUndoDBData is set

    if (pUndoDBData)
        return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
    else
        return false;       // Address book
}

ScUndoRepeatDB::ScUndoRepeatDB( ScDocShell* pNewDocShell, SCTAB nNewTab,
                                SCCOL nStartX, SCROW nStartY, SCCOL nEndX, SCROW nEndY,
                                SCROW nResultEndRow, SCCOL nCurX, SCROW nCurY,
                                ScDocument* pNewUndoDoc, ScOutlineTable* pNewUndoTab,
                                ScRangeName* pNewUndoRange, ScDBCollection* pNewUndoDB,
                                const ScRange* pOldQ, const ScRange* pNewQ ) :
    ScSimpleUndo( pNewDocShell ),
    aBlockStart( nStartX,nStartY,nNewTab ),
    aBlockEnd( nEndX,nEndY,nNewTab ),
    nNewEndRow( nResultEndRow ),
    aCursorPos( nCurX,nCurY,nNewTab ),
    pUndoDoc( pNewUndoDoc ),
    pUndoTable( pNewUndoTab ),
    pUndoRange( pNewUndoRange ),
    pUndoDB( pNewUndoDB ),
    bQuerySize( false )
{
    if ( pOldQ && pNewQ )
    {
        aOldQuery = *pOldQ;
        aNewQuery = *pNewQ;
        bQuerySize = true;
    }
}

ScUndoRepeatDB::~ScUndoRepeatDB()
{
    delete pUndoDoc;
    delete pUndoTable;
    delete pUndoRange;
    delete pUndoDB;
}

OUString ScUndoRepeatDB::GetComment() const
{
    return ScGlobal::GetRscString( STR_UNDO_REPEATDB );
}

void ScUndoRepeatDB::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    SCTAB nTab = aBlockStart.Tab();

    if (bQuerySize)
    {
        rDoc.FitBlock( aNewQuery, aOldQuery, false );

        if ( aNewQuery.aEnd.Col() == aOldQuery.aEnd.Col() )
        {
            SCCOL nFormulaCols = 0;
            SCCOL nCol = aOldQuery.aEnd.Col() + 1;
            SCROW nRow = aOldQuery.aStart.Row() + 1;        // test the header
            while ( nCol <= MAXCOL &&
                    rDoc.GetCellType(ScAddress( nCol, nRow, nTab )) == CELLTYPE_FORMULA )
            {
                ++nCol;
                ++nFormulaCols;
            }

            if ( nFormulaCols > 0 )
            {
                ScRange aOldForm = aOldQuery;
                aOldForm.aStart.SetCol( aOldQuery.aEnd.Col() + 1 );
                aOldForm.aEnd.SetCol( aOldQuery.aEnd.Col() + nFormulaCols );
                ScRange aNewForm = aOldForm;
                aNewForm.aEnd.SetRow( aNewQuery.aEnd.Row() );
                rDoc.FitBlock( aNewForm, aOldForm, false );
            }
        }
    }

    // TODO Data from Filter in other range are still missing!

    if (nNewEndRow > aBlockEnd.Row())
    {
        rDoc.DeleteRow( 0,nTab, MAXCOL,nTab, aBlockEnd.Row()+1, static_cast<SCSIZE>(nNewEndRow-aBlockEnd.Row()) );
    }
    else if (nNewEndRow < aBlockEnd.Row())
    {
        rDoc.InsertRow( 0,nTab, MAXCOL,nTab, nNewEndRow+1, static_cast<SCSIZE>(nNewEndRow-aBlockEnd.Row()) );
    }

    // Original Outline table
    rDoc.SetOutlineTable( nTab, pUndoTable );

    // Original column/row status
    if (pUndoTable)
    {
        SCCOLROW nStartCol;
        SCCOLROW nStartRow;
        SCCOLROW nEndCol;
        SCCOLROW nEndRow;
        pUndoTable->GetColArray().GetRange( nStartCol, nEndCol );
        pUndoTable->GetRowArray().GetRange( nStartRow, nEndRow );

        pUndoDoc->CopyToDocument( static_cast<SCCOL>(nStartCol), 0, nTab,
                static_cast<SCCOL>(nEndCol), MAXROW, nTab, InsertDeleteFlags::NONE, false,
                &rDoc );
        pUndoDoc->CopyToDocument( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab, InsertDeleteFlags::NONE, false, &rDoc );

        pViewShell->UpdateScrollBars();
    }

    //  Original data and references
    ScUndoUtil::MarkSimpleBlock( pDocShell, 0, aBlockStart.Row(), nTab,
                                            MAXCOL, aBlockEnd.Row(), nTab );
    rDoc.DeleteAreaTab( 0, aBlockStart.Row(),
                            MAXCOL, aBlockEnd.Row(), nTab, InsertDeleteFlags::ALL );

    pUndoDoc->CopyToDocument( 0, aBlockStart.Row(), nTab, MAXCOL, aBlockEnd.Row(), nTab,
                                                            InsertDeleteFlags::NONE, false, &rDoc );            // Flags
    pUndoDoc->UndoToDocument( 0, aBlockStart.Row(), nTab, MAXCOL, aBlockEnd.Row(), nTab,
                                                            InsertDeleteFlags::ALL, false, &rDoc );

    ScUndoUtil::MarkSimpleBlock( pDocShell, aBlockStart.Col(),aBlockStart.Row(),nTab,
                                            aBlockEnd.Col(),aBlockEnd.Row(),nTab );

    if (pUndoRange)
        rDoc.SetRangeName( new ScRangeName( *pUndoRange ) );
    if (pUndoDB)
        rDoc.SetDBCollection( new ScDBCollection( *pUndoDB ), true );

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    pDocShell->PostPaint(0,0,nTab,MAXCOL,MAXROW,nTab,PAINT_GRID|PAINT_LEFT|PAINT_TOP|PAINT_SIZE);
    pDocShell->PostDataChanged();

    EndUndo();
}

void ScUndoRepeatDB::Redo()
{
    BeginRedo();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    SCTAB nTab = aBlockStart.Tab();

    SCTAB nVisTab = pViewShell->GetViewData().GetTabNo();
    if ( nVisTab != nTab )
        pViewShell->SetTabNo( nTab );

    ScUndoUtil::MarkSimpleBlock( pDocShell, aBlockStart.Col(),aBlockStart.Row(),nTab,
                                            aBlockEnd.Col(),aBlockEnd.Row(),nTab );
    pViewShell->SetCursor( aCursorPos.Col(), aCursorPos.Row() );

    pViewShell->RepeatDB( false );

    EndRedo();
}

void ScUndoRepeatDB::Repeat(SfxRepeatTarget& rTarget)
{
    if (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr)
        static_cast<ScTabViewTarget&>(rTarget).GetViewShell()->RepeatDB();
}

bool ScUndoRepeatDB::CanRepeat(SfxRepeatTarget& rTarget) const
{
    return dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr;
}

ScUndoDataPilot::ScUndoDataPilot( ScDocShell* pNewDocShell,
                            ScDocument* pOldDoc, ScDocument* pNewDoc,
                            const ScDPObject* pOldObj, const ScDPObject* pNewObj, bool bMove ) :
    ScSimpleUndo( pNewDocShell ),
    pOldUndoDoc( pOldDoc ),
    pNewUndoDoc( pNewDoc ),
    pOldDPObject( nullptr ),
    pNewDPObject( nullptr ),
    bAllowMove( bMove )
{
    if (pOldObj)
        pOldDPObject = new ScDPObject( *pOldObj );
    if (pNewObj)
        pNewDPObject = new ScDPObject( *pNewObj );
}

ScUndoDataPilot::~ScUndoDataPilot()
{
    delete pOldDPObject;
    delete pNewDPObject;
    delete pOldUndoDoc;
    delete pNewUndoDoc;
}

OUString ScUndoDataPilot::GetComment() const
{
    sal_uInt16 nIndex;
    if ( pOldUndoDoc && pNewUndoDoc )
        nIndex = STR_UNDO_PIVOT_MODIFY;
    else if ( pNewUndoDoc )
        nIndex = STR_UNDO_PIVOT_NEW;
    else
        nIndex = STR_UNDO_PIVOT_DELETE;

    return ScGlobal::GetRscString( nIndex );
}

void ScUndoDataPilot::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();

    ScRange aOldRange;
    ScRange aNewRange;

    if ( pNewDPObject && pNewUndoDoc )
    {
        aNewRange = pNewDPObject->GetOutRange();
        rDoc.DeleteAreaTab( aNewRange, InsertDeleteFlags::ALL );
        pNewUndoDoc->CopyToDocument( aNewRange, InsertDeleteFlags::ALL, false, &rDoc );
    }
    if ( pOldDPObject && pOldUndoDoc )
    {
        aOldRange = pOldDPObject->GetOutRange();
        rDoc.DeleteAreaTab( aOldRange, InsertDeleteFlags::ALL );
        pOldUndoDoc->CopyToDocument( aOldRange, InsertDeleteFlags::ALL, false, &rDoc );
    }

    //  update objects in collection

    if ( pNewDPObject )
    {
        //  find updated object
        //! find by name!

        ScDPObject* pDocObj = rDoc.GetDPAtCursor(
                            aNewRange.aStart.Col(), aNewRange.aStart.Row(), aNewRange.aStart.Tab() );
        OSL_ENSURE(pDocObj, "DPObject not found");
        if (pDocObj)
        {
            if ( pOldDPObject )
            {
                //  restore old settings
                pOldDPObject->WriteSourceDataTo( *pDocObj );
                ScDPSaveData* pData = pOldDPObject->GetSaveData();
                if (pData)
                    pDocObj->SetSaveData(*pData);
                pDocObj->SetOutRange( pOldDPObject->GetOutRange() );
                pOldDPObject->WriteTempDataTo( *pDocObj );
            }
            else
            {
                //  delete inserted object
                rDoc.GetDPCollection()->FreeTable(pDocObj);
            }
        }
    }
    else if ( pOldDPObject )
    {
        //  re-insert deleted object

        ScDPObject* pDestObj = new ScDPObject( *pOldDPObject );
        if ( !rDoc.GetDPCollection()->InsertNewTable(pDestObj) )
        {
            OSL_FAIL("cannot insert DPObject");
            DELETEZ( pDestObj );
        }
    }

    if (pNewUndoDoc)
        pDocShell->PostPaint( aNewRange, PAINT_GRID, SC_PF_LINES );
    if (pOldUndoDoc)
        pDocShell->PostPaint( aOldRange, PAINT_GRID, SC_PF_LINES );
    pDocShell->PostDataChanged();

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    if (pViewShell)
    {
        //! set current sheet
    }

    if (pNewDPObject)
    {
        // notify API objects
        rDoc.BroadcastUno( ScDataPilotModifiedHint( pNewDPObject->GetName() ) );
    }

    EndUndo();
}

void ScUndoDataPilot::Redo()
{
    BeginRedo();

    //! copy output data instead of repeating the change,
    //! in case external data have changed!

    ScDocument& rDoc = pDocShell->GetDocument();

    ScDPObject* pSourceObj = nullptr;
    if ( pOldDPObject )
    {
        //  find object to modify
        //! find by name!

        ScRange aOldRange = pOldDPObject->GetOutRange();
        pSourceObj = rDoc.GetDPAtCursor(
                        aOldRange.aStart.Col(), aOldRange.aStart.Row(), aOldRange.aStart.Tab() );
        OSL_ENSURE(pSourceObj, "DPObject not found");
    }

    ScDBDocFunc aFunc( *pDocShell );
    aFunc.DataPilotUpdate( pSourceObj, pNewDPObject, false, false, bAllowMove );    // no new undo action

    EndRedo();
}

void ScUndoDataPilot::Repeat(SfxRepeatTarget& /* rTarget */)
{
    //! allow deletion
}

bool ScUndoDataPilot::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    //! allow deletion
    return false;
}

ScUndoConsolidate::ScUndoConsolidate( ScDocShell* pNewDocShell, const ScArea& rArea,
                    const ScConsolidateParam& rPar, ScDocument* pNewUndoDoc,
                    bool bReference, SCROW nInsCount, ScOutlineTable* pTab,
                    ScDBData* pData ) :
    ScSimpleUndo( pNewDocShell ),
    aDestArea( rArea ),
    pUndoDoc( pNewUndoDoc ),
    aParam( rPar ),
    bInsRef( bReference ),
    nInsertCount( nInsCount ),
    pUndoTab( pTab ),
    pUndoData( pData )
{
}

ScUndoConsolidate::~ScUndoConsolidate()
{
    delete pUndoDoc;
    delete pUndoTab;
    delete pUndoData;
}

OUString ScUndoConsolidate::GetComment() const
{
    return ScGlobal::GetRscString( STR_UNDO_CONSOLIDATE );
}

void ScUndoConsolidate::Undo()
{
    BeginUndo();

    ScDocument& rDoc = pDocShell->GetDocument();
    SCTAB nTab = aDestArea.nTab;

    ScRange aOldRange;
    if (pUndoData)
        pUndoData->GetArea(aOldRange);

    if (bInsRef)
    {
        rDoc.DeleteRow( 0,nTab, MAXCOL,nTab, aDestArea.nRowStart, nInsertCount );
        rDoc.SetOutlineTable( nTab, pUndoTab );

        // Row status
        pUndoDoc->CopyToDocument( 0,0,nTab, MAXCOL,MAXROW,nTab, InsertDeleteFlags::NONE, false, &rDoc );

        // Data and references
        rDoc.DeleteAreaTab( 0,aDestArea.nRowStart, MAXCOL,aDestArea.nRowEnd, nTab, InsertDeleteFlags::ALL );
        pUndoDoc->UndoToDocument( 0, aDestArea.nRowStart, nTab,
                                    MAXCOL, aDestArea.nRowEnd, nTab,
                                    InsertDeleteFlags::ALL, false, &rDoc );

        // Original range
        if (pUndoData)
        {
            rDoc.DeleteAreaTab(aOldRange, InsertDeleteFlags::ALL);
            pUndoDoc->CopyToDocument(aOldRange, InsertDeleteFlags::ALL, false, &rDoc);
        }

        pDocShell->PostPaint( 0,aDestArea.nRowStart,nTab, MAXCOL,MAXROW,nTab,
                                PAINT_GRID | PAINT_LEFT | PAINT_SIZE );
    }
    else
    {
        rDoc.DeleteAreaTab( aDestArea.nColStart,aDestArea.nRowStart,
                                aDestArea.nColEnd,aDestArea.nRowEnd, nTab, InsertDeleteFlags::ALL );
        pUndoDoc->CopyToDocument( aDestArea.nColStart, aDestArea.nRowStart, nTab,
                                    aDestArea.nColEnd, aDestArea.nRowEnd, nTab,
                                    InsertDeleteFlags::ALL, false, &rDoc );

        //  Original range
        if (pUndoData)
        {
            rDoc.DeleteAreaTab(aOldRange, InsertDeleteFlags::ALL);
            pUndoDoc->CopyToDocument(aOldRange, InsertDeleteFlags::ALL, false, &rDoc);
        }

        SCCOL nEndX = aDestArea.nColEnd;
        SCROW nEndY = aDestArea.nRowEnd;
        if ( pUndoData )
        {
            if ( aOldRange.aEnd.Col() > nEndX )
                nEndX = aOldRange.aEnd.Col();
            if ( aOldRange.aEnd.Row() > nEndY )
                nEndY = aOldRange.aEnd.Row();
        }
        pDocShell->PostPaint( aDestArea.nColStart, aDestArea.nRowStart, nTab,
                                    nEndX, nEndY, nTab, PAINT_GRID );
    }

    // Adjust Database range again
    if (pUndoData)
    {
        ScDBCollection* pColl = rDoc.GetDBCollection();
        if (pColl)
        {
            ScDBData* pDocData = pColl->getNamedDBs().findByUpperName(pUndoData->GetUpperName());
            if (pDocData)
                *pDocData = *pUndoData;
        }
    }

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    if (pViewShell)
    {
        SCTAB nViewTab = pViewShell->GetViewData().GetTabNo();
        if ( nViewTab != nTab )
            pViewShell->SetTabNo( nTab );
    }

    EndUndo();
}

void ScUndoConsolidate::Redo()
{
    BeginRedo();

    pDocShell->DoConsolidate( aParam, false );

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();
    if (pViewShell)
    {
        SCTAB nViewTab = pViewShell->GetViewData().GetTabNo();
        if ( nViewTab != aParam.nTab )
            pViewShell->SetTabNo( aParam.nTab );
    }

    EndRedo();
}

void ScUndoConsolidate::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoConsolidate::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;
}

// Change source data of Chart
void ScUndoChartData::Init()
{
    ScDocument& rDoc = pDocShell->GetDocument();
    aOldRangeListRef = new ScRangeList;
    rDoc.GetOldChartParameters( aChartName, *aOldRangeListRef, bOldColHeaders, bOldRowHeaders );
}

ScUndoChartData::ScUndoChartData( ScDocShell* pNewDocShell, const OUString& rName,
                                    const ScRange& rNew, bool bColHdr, bool bRowHdr,
                                    bool bAdd ) :
    ScSimpleUndo( pNewDocShell ),
    aChartName( rName ),
    bNewColHeaders( bColHdr ),
    bNewRowHeaders( bRowHdr ),
    bAddRange( bAdd )
{
    aNewRangeListRef = new ScRangeList;
    aNewRangeListRef->Append( rNew );

    Init();
}

ScUndoChartData::ScUndoChartData( ScDocShell* pNewDocShell, const OUString& rName,
                                    const ScRangeListRef& rNew, bool bColHdr, bool bRowHdr,
                                    bool bAdd ) :
    ScSimpleUndo( pNewDocShell ),
    aChartName( rName ),
    aNewRangeListRef( rNew ),
    bNewColHeaders( bColHdr ),
    bNewRowHeaders( bRowHdr ),
    bAddRange( bAdd )
{
    Init();
}

ScUndoChartData::~ScUndoChartData()
{
}

OUString ScUndoChartData::GetComment() const
{
    return ScGlobal::GetRscString( STR_UNDO_CHARTDATA );
}

void ScUndoChartData::Undo()
{
    BeginUndo();

    pDocShell->GetDocument().UpdateChartArea( aChartName, aOldRangeListRef,
                                bOldColHeaders, bOldRowHeaders, false );

    EndUndo();
}

void ScUndoChartData::Redo()
{
    BeginRedo();

    pDocShell->GetDocument().UpdateChartArea( aChartName, aNewRangeListRef,
                                bNewColHeaders, bNewRowHeaders, bAddRange );

    EndRedo();
}

void ScUndoChartData::Repeat(SfxRepeatTarget& /* rTarget */)
{
}

bool ScUndoChartData::CanRepeat(SfxRepeatTarget& /* rTarget */) const
{
    return false;
}

ScUndoDataForm::ScUndoDataForm( ScDocShell* pNewDocShell,
                                SCCOL nStartX, SCROW nStartY, SCTAB nStartZ,
                                SCCOL nEndX, SCROW nEndY, SCTAB nEndZ,
                                const ScMarkData& rMark,
                                ScDocument* pNewUndoDoc, ScDocument* pNewRedoDoc,
                                InsertDeleteFlags nNewFlags,
                                ScRefUndoData* pRefData,
                                void* /*pFill1*/, void* /*pFill2*/, void* /*pFill3*/ ) :
        ScBlockUndo( pNewDocShell, ScRange( nStartX, nStartY, nStartZ, nEndX, nEndY, nEndZ ), SC_UNDO_SIMPLE ),
        mpMarkData(new ScMarkData(rMark)),
        pUndoDoc( pNewUndoDoc ),
        pRedoDoc( pNewRedoDoc ),
        nFlags( nNewFlags ),
        pRefUndoData( pRefData ),
        pRefRedoData( nullptr ),
        bRedoFilled( false )
{
        //      pFill1,pFill2,pFill3 are there so the ctor calls for simple paste (without cutting)
        //      don't have to be changed and branched for 641.
        //      They can be removed later.

        if (!mpMarkData->IsMarked())                            // no cell marked:
                mpMarkData->SetMarkArea(aBlockRange);   //  mark paste block

        if ( pRefUndoData )
                pRefUndoData->DeleteUnchanged( &pDocShell->GetDocument() );

        SetChangeTrack();
}

ScUndoDataForm::~ScUndoDataForm()
{
        delete pUndoDoc;
        delete pRedoDoc;
        delete pRefUndoData;
        delete pRefRedoData;
}

OUString ScUndoDataForm::GetComment() const
{
        return ScGlobal::GetRscString( STR_UNDO_PASTE );
}

void ScUndoDataForm::SetChangeTrack()
{
        ScChangeTrack* pChangeTrack = pDocShell->GetDocument().GetChangeTrack();
        if ( pChangeTrack && (nFlags & InsertDeleteFlags::CONTENTS) )
                pChangeTrack->AppendContentRange( aBlockRange, pUndoDoc,
                        nStartChangeAction, nEndChangeAction, SC_CACM_PASTE );
        else
                nStartChangeAction = nEndChangeAction = 0;
}

void ScUndoDataForm::Undo()
{
        BeginUndo();
        DoChange( true );
        ShowTable( aBlockRange );
        EndUndo();
        SfxGetpApp()->Broadcast( SfxSimpleHint( SC_HINT_AREALINKS_CHANGED ) );
}

void ScUndoDataForm::Redo()
{
        BeginRedo();
        ScDocument& rDoc = pDocShell->GetDocument();
        EnableDrawAdjust( &rDoc, false );                                //! include in ScBlockUndo?
        DoChange( false );
        EnableDrawAdjust( &rDoc, true );                                 //! include in ScBlockUndo?
        EndRedo();
        SfxGetpApp()->Broadcast( SfxSimpleHint( SC_HINT_AREALINKS_CHANGED ) );
}

void ScUndoDataForm::Repeat(SfxRepeatTarget& /*rTarget*/)
{
}

bool ScUndoDataForm::CanRepeat(SfxRepeatTarget& rTarget) const
{
        return (dynamic_cast<const ScTabViewTarget*>( &rTarget) !=  nullptr);
}

void ScUndoDataForm::DoChange( const bool bUndo )
{
    ScDocument& rDoc = pDocShell->GetDocument();

    //      RefUndoData for redo is created before first undo
    //      (with DeleteUnchanged after the DoUndo call)
    bool bCreateRedoData = ( bUndo && pRefUndoData && !pRefRedoData );
    if ( bCreateRedoData )
            pRefRedoData = new ScRefUndoData( &rDoc );

    ScRefUndoData* pWorkRefData = bUndo ? pRefUndoData : pRefRedoData;

    // Always back-up either all or none of the content for Undo
    InsertDeleteFlags nUndoFlags = InsertDeleteFlags::NONE;
    if (nFlags & InsertDeleteFlags::CONTENTS)
            nUndoFlags |= InsertDeleteFlags::CONTENTS;
    if (nFlags & InsertDeleteFlags::ATTRIB)
            nUndoFlags |= InsertDeleteFlags::ATTRIB;

    bool bPaintAll = false;

    ScTabViewShell* pViewShell = ScTabViewShell::GetActiveViewShell();

    SCTAB nTabCount = rDoc.GetTableCount();
    if ( bUndo && !bRedoFilled )
    {
        if (!pRedoDoc)
        {
            bool bColInfo = ( aBlockRange.aStart.Row()==0 && aBlockRange.aEnd.Row()==MAXROW );
            bool bRowInfo = ( aBlockRange.aStart.Col()==0 && aBlockRange.aEnd.Col()==MAXCOL );

            pRedoDoc = new ScDocument( SCDOCMODE_UNDO );
            pRedoDoc->InitUndoSelected( &rDoc, *mpMarkData, bColInfo, bRowInfo );
        }
        //  read "redo" data from the document in the first undo
            //  all sheets - CopyToDocument skips those that don't exist in pRedoDoc
        ScRange aCopyRange = aBlockRange;
        aCopyRange.aStart.SetTab(0);
        aCopyRange.aEnd.SetTab(nTabCount-1);
        rDoc.CopyToDocument( aCopyRange, InsertDeleteFlags::VALUE, false, pRedoDoc );
        bRedoFilled = true;
    }

    sal_uInt16 nExtFlags = 0;
    pDocShell->UpdatePaintExt( nExtFlags, aBlockRange );

    for ( sal_uInt16 i=0; i <= ( aBlockRange.aEnd.Col() - aBlockRange.aStart.Col() ); i++ )
    {
        OUString aOldString = pUndoDoc->GetString(
            aBlockRange.aStart.Col()+i, aBlockRange.aStart.Row(), aBlockRange.aStart.Tab());
        rDoc.SetString( aBlockRange.aStart.Col()+i , aBlockRange.aStart.Row() , aBlockRange.aStart.Tab() , aOldString );
    }

    if (pWorkRefData)
    {
        pWorkRefData->DoUndo( &rDoc, true );             // TRUE = bSetChartRangeLists for SetChartListenerCollection
        if ( rDoc.RefreshAutoFilter( 0,0, MAXCOL,MAXROW, aBlockRange.aStart.Tab() ) )
            bPaintAll = true;
    }

    if ( bCreateRedoData && pRefRedoData )
            pRefRedoData->DeleteUnchanged( &rDoc );

    if ( bUndo )
    {
        ScChangeTrack* pChangeTrack = rDoc.GetChangeTrack();
        if ( pChangeTrack )
            pChangeTrack->Undo( nStartChangeAction, nEndChangeAction );
    }
    else
        SetChangeTrack();

    ScRange aDrawRange( aBlockRange );
    rDoc.ExtendMerge( aDrawRange, true );      // only needed for single sheet (text/rtf etc.)
    sal_uInt16 nPaint = PAINT_GRID;
    if (bPaintAll)
    {
        aDrawRange.aStart.SetCol(0);
        aDrawRange.aStart.SetRow(0);
        aDrawRange.aEnd.SetCol(MAXCOL);
        aDrawRange.aEnd.SetRow(MAXROW);
        nPaint |= PAINT_TOP | PAINT_LEFT;
/*A*/   if (pViewShell)
            pViewShell->AdjustBlockHeight(false);
    }
    else
    {
        if ( aBlockRange.aStart.Row() == 0 && aBlockRange.aEnd.Row() == MAXROW )        // whole column
        {
            nPaint |= PAINT_TOP;
            aDrawRange.aEnd.SetCol(MAXCOL);
        }
        if ( aBlockRange.aStart.Col() == 0 && aBlockRange.aEnd.Col() == MAXCOL )        // whole row
        {
            nPaint |= PAINT_LEFT;
            aDrawRange.aEnd.SetRow(MAXROW);
        }
/*A*/   if ((pViewShell) && pViewShell->AdjustBlockHeight(false))
        {
            aDrawRange.aStart.SetCol(0);
            aDrawRange.aStart.SetRow(0);
            aDrawRange.aEnd.SetCol(MAXCOL);
            aDrawRange.aEnd.SetRow(MAXROW);
            nPaint |= PAINT_LEFT;
        }
        pDocShell->UpdatePaintExt( nExtFlags, aDrawRange );
    }

    if ( !bUndo )                               //      draw redo after updating row heights
        RedoSdrUndoAction( pDrawUndo );                 //!     include in ScBlockUndo?

    pDocShell->PostPaint( aDrawRange, nPaint, nExtFlags );

    pDocShell->PostDataChanged();
    if (pViewShell)
        pViewShell->CellContentChanged();
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */