/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #ifndef INCLUDED_SC_SOURCE_UI_INC_OUTPUT_HXX #define INCLUDED_SC_SOURCE_UI_INC_OUTPUT_HXX #include "address.hxx" #include "cellvalue.hxx" #include #include #include #include namespace sc { struct SpellCheckContext; } namespace editeng { struct MisspellRanges; } class Rectangle; class Font; class OutputDevice; class EditEngine; class ScDocument; class ScPatternAttr; class SdrObject; struct RowInfo; struct ScTableInfo; class ScTabViewShell; class ScPageBreakData; class FmFormView; class ScFieldEditEngine; class SdrPaintWindow; #define SC_SCENARIO_HSPACE 60 #define SC_SCENARIO_VSPACE 50 enum ScOutputType { OUTTYPE_WINDOW, OUTTYPE_PRINTER }; class ScFieldEditEngine; class ScOutputData { friend class ScDrawStringsVars; private: struct OutputAreaParam { Rectangle maAlignRect; Rectangle maClipRect; long mnColWidth; long mnLeftClipLength; /// length of the string getting cut off on the left. long mnRightClipLength; /// length of the string getting cut off on the right. bool mbLeftClip; bool mbRightClip; }; class DrawEditParam { public: SvxCellHorJustify meHorJustAttr; ///< alignment attribute SvxCellHorJustify meHorJustContext; ///< context depending on attribute, content and direction SvxCellHorJustify meHorJustResult; ///< result for EditEngine SvxCellVerJustify meVerJust; SvxCellJustifyMethod meHorJustMethod; SvxCellJustifyMethod meVerJustMethod; SvxCellOrientation meOrient; SCSIZE mnArrY; SCCOL mnX; SCROW mnY; SCCOL mnCellX; SCROW mnCellY; SCTAB mnTab; long mnPosX; long mnPosY; long mnInitPosX; bool mbBreak:1; bool mbCellIsValue:1; bool mbAsianVertical:1; bool mbPixelToLogic:1; bool mbHyphenatorSet:1; ScFieldEditEngine* mpEngine; ScRefCellValue maCell; const ScPatternAttr* mpPattern; const SfxItemSet* mpCondSet; const SfxItemSet* mpPreviewFontSet; const ScPatternAttr* mpOldPattern; const SfxItemSet* mpOldCondSet; const SfxItemSet* mpOldPreviewFontSet; const RowInfo* mpThisRowInfo; const std::vector* mpMisspellRanges; explicit DrawEditParam(const ScPatternAttr* pPattern, const SfxItemSet* pCondSet, bool bCellIsValue); bool readCellContent(ScDocument* pDoc, bool bShowNullValues, bool bShowFormulas, bool bSyntaxMode, bool bUseStyleColor, bool bForceAutoColor, bool& rWrapFields); void setPatternToEngine(bool bUseStyleColor); void calcMargins(long& rTop, long& rLeft, long& rBottom, long& rRight, double nPPTX, double nPPTY) const; void calcPaperSize(Size& rPaperSize, const Rectangle& rAlignRect, double nPPTX, double nPPTY) const; void getEngineSize(ScFieldEditEngine* pEngine, long& rWidth, long& rHeight) const; bool hasLineBreak() const; bool isHyperlinkCell() const; /** * When the text is vertically oriented, the text is either rotated 90 * degrees to the right or 90 degrees to the left. Note that this is * different from being vertically stacked. */ bool isVerticallyOriented() const; /** * Calculate offset position for vertically oriented (either * top-bottom or bottom-top orientation) text. * * @param rLogicStart initial position in pixels. When the call is * finished, this parameter will store the new * position. */ void calcStartPosForVertical(Point& rLogicStart, long nCellWidth, long nEngineWidth, long nTopM, OutputDevice* pRefDevice); void setAlignmentToEngine(); bool adjustHorAlignment(ScFieldEditEngine* pEngine); void adjustForRTL(); void adjustForHyperlinkInPDF(Point aURLStart, OutputDevice* pDev); }; OutputDevice* mpDev; // Device OutputDevice* mpRefDevice; // printer if used for preview OutputDevice* pFmtDevice; // reference for text formatting ScTableInfo& mrTabInfo; RowInfo* pRowInfo; // Info block SCSIZE nArrCount; // occupied lines in info block ScDocument* mpDoc; // Document SCTAB nTab; // sheet long nScrX; // Output Startpos. (Pixel) long nScrY; long nScrW; // Output size (Pixel) long nScrH; long nMirrorW; // Visible output width for mirroring (default: nScrW) SCCOL nX1; // Start-/End coordinates SCROW nY1; // ( incl. hidden ) SCCOL nX2; SCROW nY2; SCCOL nVisX1; // Start-/End coordinates SCROW nVisY1; // ( visable range ) SCCOL nVisX2; SCROW nVisY2; ScOutputType eType; // Screen/Printer ... double mnPPTX; // Pixel per Twips double mnPPTY; Fraction aZoomX; Fraction aZoomY; SdrObject* pEditObj; // Omit when painting ScTabViewShell* pViewShell; // for connect from visible plug-ins // #114135# FmFormView* pDrawView; // SdrView to paint to bool bEditMode; // InPlace edited cell - do not output SCCOL nEditCol; SCROW nEditRow; bool bMetaFile; // Output to metafile (not pixels!) bool bSingleGrid; // beim Gitter bChanged auswerten bool bPagebreakMode; // Page break preview bool bSolidBackground; // white instead of transparant bool mbUseStyleColor; bool mbForceAutoColor; bool mbSyntaxMode; // Syntax highlighting Color* pValueColor; Color* pTextColor; Color* pFormulaColor; Color aGridColor; bool mbShowNullValues; bool mbShowFormulas; bool bShowSpellErrors; // Show spelling errors in EditObjects bool bMarkClipped; bool bSnapPixel; bool bAnyRotated; // internal bool bAnyClipped; // internal bool bTabProtected; sal_uInt8 nTabTextDirection; // EEHorizontalTextDirection values bool bLayoutRTL; // #i74769# use SdrPaintWindow direct, remember it during BeginDrawLayers/EndDrawLayers SdrPaintWindow* mpTargetPaintWindow; const sc::SpellCheckContext* mpSpellCheckCxt; // private methods bool GetMergeOrigin( SCCOL nX, SCROW nY, SCSIZE nArrY, SCCOL& rOverX, SCROW& rOverY, bool bVisRowChanged ); bool IsEmptyCellText( RowInfo* pThisRowInfo, SCCOL nX, SCROW nY ); void GetVisibleCell( SCCOL nCol, SCROW nRow, SCTAB nTab, ScRefCellValue& rCell ); bool IsAvailable( SCCOL nX, SCROW nY ); void GetOutputArea( SCCOL nX, SCSIZE nArrY, long nPosX, long nPosY, SCCOL nCellX, SCROW nCellY, long nNeeded, const ScPatternAttr& rPattern, sal_uInt16 nHorJustify, bool bCellIsValue, bool bBreak, bool bOverwrite, OutputAreaParam& rParam ); void ShrinkEditEngine( EditEngine& rEngine, const Rectangle& rAlignRect, long nLeftM, long nTopM, long nRightM, long nBottomM, bool bWidth, sal_uInt16 nOrient, long nAttrRotate, bool bPixelToLogic, long& rEngineWidth, long& rEngineHeight, long& rNeededPixel, bool& rLeftClip, bool& rRightClip ); void SetSyntaxColor( Font* pFont, const ScRefCellValue& rCell ); void SetEditSyntaxColor( EditEngine& rEngine, ScRefCellValue& rCell ); double GetStretch(); void DrawRotatedFrame( const Color* pForceColor ); // pixel drawinglayer::processor2d::BaseProcessor2D* CreateProcessor2D( ); void DrawEditStandard(DrawEditParam& rParam); void DrawEditBottomTop(DrawEditParam& rParam); void DrawEditTopBottom(DrawEditParam& rParam); void DrawEditStacked(DrawEditParam& rParam); void DrawEditAsianVertical(DrawEditParam& rParam); ScFieldEditEngine* CreateOutputEditEngine(); void ShowClipMarks( DrawEditParam& rParam, long nEngineHeight, const Size& aCellSize, bool bMerged, OutputAreaParam& aAreaParam ); bool Clip( DrawEditParam& rParam, const Size& aCellSize, OutputAreaParam& aAreaParam, long nEngineHeight, bool bWrapFields); public: ScOutputData( OutputDevice* pNewDev, ScOutputType eNewType, ScTableInfo& rTabInfo, ScDocument* pNewDoc, SCTAB nNewTab, long nNewScrX, long nNewScrY, SCCOL nNewX1, SCROW nNewY1, SCCOL nNewX2, SCROW nNewY2, double nPixelPerTwipsX, double nPixelPerTwipsY, const Fraction* pZoomX = NULL, const Fraction* pZoomY = NULL ); ~ScOutputData(); void SetSpellCheckContext( const sc::SpellCheckContext* pCxt ); void SetContentDevice( OutputDevice* pContentDev ); void SetRefDevice( OutputDevice* pRDev ) { mpRefDevice = pFmtDevice = pRDev; } void SetFmtDevice( OutputDevice* pRDev ) { pFmtDevice = pRDev; } void SetEditObject( SdrObject* pObj ) { pEditObj = pObj; } void SetViewShell( ScTabViewShell* pSh ) { pViewShell = pSh; } // #114135# void SetDrawView( FmFormView* pNew ) { pDrawView = pNew; } void SetSolidBackground( bool bSet ) { bSolidBackground = bSet; } void SetUseStyleColor( bool bSet ) { mbUseStyleColor = bSet; } void SetEditCell( SCCOL nCol, SCROW nRow ); void SetSyntaxMode( bool bNewMode ); void SetMetaFileMode( bool bNewMode ); void SetSingleGrid( bool bNewMode ); void SetGridColor( const Color& rColor ); void SetMarkClipped( bool bSet ); void SetShowNullValues ( bool bSet = true ); void SetShowFormulas ( bool bSet = true ); void SetShowSpellErrors( bool bSet = true ); void SetMirrorWidth( long nNew ); long GetScrW() const { return nScrW; } long GetScrH() const { return nScrH; } void SetSnapPixel( bool bSet = true ); void DrawGrid( bool bGrid, bool bPage ); void DrawStrings( bool bPixelToLogic = false ); void DrawDocumentBackground(); void DrawBackground(); void DrawShadow(); void DrawExtraShadow(bool bLeft, bool bTop, bool bRight, bool bBottom); void DrawFrame(); // with logic MapMode set! void DrawEdit(bool bPixelToLogic); void FindRotated(); void DrawRotated(bool bPixelToLogic); // logical void DrawClear(); // #i72502# printer only command set Point PrePrintDrawingLayer(long nLogStX, long nLogStY ); void PostPrintDrawingLayer(const Point& rMMOffset); // #i74768# need offset for FormLayer void PrintDrawingLayer(const sal_uInt16 nLayer, const Point& rMMOffset); // only screen: void DrawingSingle(const sal_uInt16 nLayer); void DrawSelectiveObjects(const sal_uInt16 nLayer); bool SetChangedClip(); // sal_False = not Region GetChangedAreaRegion(); void FindChanged(); void SetPagebreakMode( ScPageBreakData* pPageData ); void DrawRefMark( SCCOL nRefStartX, SCROW nRefStartY, SCCOL nRefEndX, SCROW nRefEndY, const Color& rColor, bool bHandle ); void DrawOneChange( SCCOL nRefStartX, SCROW nRefStartY, SCCOL nRefEndX, SCROW nRefEndY, const Color& rColor, sal_uInt16 nType ); void DrawChangeTrack(); void DrawClipMarks(); void DrawNoteMarks(); void AddPDFNotes(); }; #endif /* vim:set shiftwidth=4 softtabstop=4 expandtab: */