/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include "ucalc.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include namespace { struct DPFieldDef { const char* pName; sheet::DataPilotFieldOrientation eOrient; /** * Function for data field. It's used only for data field. When 0, the * default function (SUM) is used. */ ScGeneralFunction eFunc; bool bRepeatItemLabels; }; template ScRange insertDPSourceData(ScDocument* pDoc, DPFieldDef aFields[], size_t nFieldCount, const char* aData[][Size], size_t nDataCount) { // Insert field names in row 0. for (size_t i = 0; i < nFieldCount; ++i) pDoc->SetString(static_cast(i), 0, 0, OUString(aFields[i].pName, strlen(aFields[i].pName), RTL_TEXTENCODING_UTF8)); // Insert data into row 1 and downward. for (size_t i = 0; i < nDataCount; ++i) { SCROW nRow = static_cast(i) + 1; for (size_t j = 0; j < nFieldCount; ++j) { SCCOL nCol = static_cast(j); pDoc->SetString( nCol, nRow, 0, OUString(aData[i][j], strlen(aData[i][j]), RTL_TEXTENCODING_UTF8)); } } SCROW nRow1 = 0, nRow2 = 0; SCCOL nCol1 = 0, nCol2 = 0; pDoc->GetDataArea(0, nCol1, nRow1, nCol2, nRow2, true, false); CPPUNIT_ASSERT_MESSAGE("Data is expected to start from (col=0,row=0).", nCol1 == 0 && nRow1 == 0); CPPUNIT_ASSERT_MESSAGE("Unexpected data range.", nCol2 == static_cast(nFieldCount - 1) && nRow2 == static_cast(nDataCount)); ScRange aSrcRange(nCol1, nRow1, 0, nCol2, nRow2, 0); Test::printRange(pDoc, aSrcRange, "Data sheet content"); return aSrcRange; } template bool checkDPTableOutput(ScDocument* pDoc, const ScRange& aOutRange, const char* aOutputCheck[][Size], const char* pCaption) { return checkOutput(pDoc, aOutRange, aOutputCheck, pCaption); } ScDPObject* createDPFromSourceDesc( ScDocument* pDoc, const ScSheetSourceDesc& rDesc, DPFieldDef aFields[], size_t nFieldCount, bool bFilterButton) { ScDPObject* pDPObj = new ScDPObject(pDoc); pDPObj->SetSheetDesc(rDesc); pDPObj->SetOutRange(ScAddress(0, 0, 1)); ScDPSaveData aSaveData; // Set data pilot table output options. aSaveData.SetIgnoreEmptyRows(false); aSaveData.SetRepeatIfEmpty(false); aSaveData.SetColumnGrand(true); aSaveData.SetRowGrand(true); aSaveData.SetFilterButton(bFilterButton); aSaveData.SetDrillDown(true); // Check the sanity of the source range. const ScRange& rSrcRange = rDesc.GetSourceRange(); SCROW nRow1 = rSrcRange.aStart.Row(); SCROW nRow2 = rSrcRange.aEnd.Row(); CPPUNIT_ASSERT_MESSAGE("source range contains no data!", nRow2 - nRow1 > 1); // Set the dimension information. for (size_t i = 0; i < nFieldCount; ++i) { OUString aDimName = OUString::createFromAscii(aFields[i].pName); ScDPSaveDimension* pDim = aSaveData.GetNewDimensionByName(aDimName); pDim->SetOrientation(aFields[i].eOrient); pDim->SetUsedHierarchy(0); if (aFields[i].eOrient == sheet::DataPilotFieldOrientation_DATA) { ScGeneralFunction eFunc = ScGeneralFunction::SUM; if (aFields[i].eFunc != ScGeneralFunction::NONE) eFunc = aFields[i].eFunc; pDim->SetFunction(eFunc); pDim->SetReferenceValue(nullptr); } else { sheet::DataPilotFieldSortInfo aSortInfo; aSortInfo.IsAscending = true; aSortInfo.Mode = 2; pDim->SetSortInfo(&aSortInfo); sheet::DataPilotFieldLayoutInfo aLayInfo; aLayInfo.LayoutMode = 0; aLayInfo.AddEmptyLines = false; pDim->SetLayoutInfo(&aLayInfo); sheet::DataPilotFieldAutoShowInfo aShowInfo; aShowInfo.IsEnabled = false; aShowInfo.ShowItemsMode = 0; aShowInfo.ItemCount = 0; pDim->SetAutoShowInfo(&aShowInfo); pDim->SetRepeatItemLabels(aFields[i].bRepeatItemLabels); } } // Don't forget the data layout dimension. ScDPSaveDimension* pDim = aSaveData.GetDataLayoutDimension(); pDim->SetOrientation(sheet::DataPilotFieldOrientation_ROW); pDim->SetShowEmpty(true); pDPObj->SetSaveData(aSaveData); pDPObj->InvalidateData(); return pDPObj; } ScDPObject* createDPFromRange( ScDocument* pDoc, const ScRange& rRange, DPFieldDef aFields[], size_t nFieldCount, bool bFilterButton) { ScSheetSourceDesc aSheetDesc(pDoc); aSheetDesc.SetSourceRange(rRange); return createDPFromSourceDesc(pDoc, aSheetDesc, aFields, nFieldCount, bFilterButton); } ScRange refresh(ScDPObject* pDPObj) { bool bOverflow = false; ScRange aOutRange = pDPObj->GetNewOutputRange(bOverflow); CPPUNIT_ASSERT_MESSAGE("Table overflow!?", !bOverflow); pDPObj->Output(aOutRange.aStart); aOutRange = pDPObj->GetOutRange(); return aOutRange; } ScRange refreshGroups(ScDPCollection* pDPs, ScDPObject* pDPObj) { // We need to first create group data in the cache, then the group data in // the object. std::set aRefs; bool bSuccess = pDPs->ReloadGroupsInCache(pDPObj, aRefs); CPPUNIT_ASSERT_MESSAGE("Failed to reload group data in cache.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be only one table linked to this cache.", size_t(1), aRefs.size()); pDPObj->ReloadGroupTableData(); return refresh(pDPObj); } } void Test::testPivotTable() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Group", sheet::DataPilotFieldOrientation_COLUMN, ScGeneralFunction::NONE, false }, { "Score", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][3] = { { "Andy", "A", "30" }, { "Bruce", "A", "20" }, { "Charlie", "B", "45" }, { "David", "B", "12" }, { "Edward", "C", "8" }, { "Frank", "C", "15" }, }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); SCROW nRow1 = aSrcRange.aStart.Row(), nRow2 = aSrcRange.aEnd.Row(); SCCOL nCol1 = aSrcRange.aStart.Col(), nCol2 = aSrcRange.aEnd.Col(); ScDPObject* pDPObj = createDPFromRange( m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), aFields, nFieldCount, false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new datapilot object into document", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); bool bOverflow = false; ScRange aOutRange = pDPObj->GetNewOutputRange(bOverflow); CPPUNIT_ASSERT_MESSAGE("Table overflow!?", !bOverflow); pDPObj->Output(aOutRange.aStart); aOutRange = pDPObj->GetOutRange(); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][5] = { { "Sum - Score", "Group", nullptr, nullptr, nullptr }, { "Name", "A", "B", "C", "Total Result" }, { "Andy", "30", nullptr, nullptr, "30" }, { "Bruce", "20", nullptr, nullptr, "20" }, { "Charlie", nullptr, "45", nullptr, "45" }, { "David", nullptr, "12", nullptr, "12" }, { "Edward", nullptr, nullptr, "8", "8" }, { "Frank", nullptr, nullptr, "15", "15" }, { "Total Result", "50", "57", "23", "130" } }; bSuccess = checkDPTableOutput<5>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be only one data cache.", size_t(1), pDPs->GetSheetCaches().size()); // Update the cell values. double aData2[] = { 100, 200, 300, 400, 500, 600 }; for (size_t i = 0; i < SAL_N_ELEMENTS(aData2); ++i) { SCROW nRow = i + 1; m_pDoc->SetValue(2, nRow, 0, aData2[i]); } printRange(m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), "Data sheet content (modified)"); // Now, create a copy of the datapilot object for the updated table, but // don't reload the cache which should force the copy to use the old data // from the cache. ScDPObject* pDPObj2 = new ScDPObject(*pDPObj); pDPs->InsertNewTable(pDPObj2); aOutRange = pDPObj2->GetOutRange(); pDPObj2->ClearTableData(); pDPObj2->Output(aOutRange.aStart); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][5] = { { "Sum - Score", "Group", nullptr, nullptr, nullptr }, { "Name", "A", "B", "C", "Total Result" }, { "Andy", "30", nullptr, nullptr, "30" }, { "Bruce", "20", nullptr, nullptr, "20" }, { "Charlie", nullptr, "45", nullptr, "45" }, { "David", nullptr, "12", nullptr, "12" }, { "Edward", nullptr, nullptr, "8", "8" }, { "Frank", nullptr, nullptr, "15", "15" }, { "Total Result", "50", "57", "23", "130" } }; bSuccess = checkDPTableOutput<5>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output (from old cache)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be only one data cache.", size_t(1), pDPs->GetSheetCaches().size()); // Free the first datapilot object after the 2nd one gets reloaded, to // prevent the data cache from being deleted before the reload. pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be only one data cache.", size_t(1), pDPs->GetSheetCaches().size()); // This time clear the cache to refresh the data from the source range. CPPUNIT_ASSERT_MESSAGE("This datapilot should be based on sheet data.", pDPObj2->IsSheetData()); std::set aRefs; const char* pErrId = pDPs->ReloadCache(pDPObj2, aRefs); CPPUNIT_ASSERT_EQUAL_MESSAGE("Cache reload failed.", static_cast(nullptr), pErrId); CPPUNIT_ASSERT_EQUAL_MESSAGE("Reloading a cache shouldn't remove any cache.", static_cast(1), pDPs->GetSheetCaches().size()); pDPObj2->ClearTableData(); pDPObj2->Output(aOutRange.aStart); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][5] = { { "Sum - Score", "Group", nullptr, nullptr, nullptr }, { "Name", "A", "B", "C", "Total Result" }, { "Andy", "100", nullptr, nullptr, "100" }, { "Bruce", "200", nullptr, nullptr, "200" }, { "Charlie", nullptr, "300", nullptr, "300" }, { "David", nullptr, "400", nullptr, "400" }, { "Edward", nullptr, nullptr, "500", "500" }, { "Frank", nullptr, nullptr, "600", "600" }, { "Total Result", "300", "700", "1100", "2100" } }; bSuccess = checkDPTableOutput<5>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output (refreshed)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } CPPUNIT_ASSERT_MESSAGE("Cache should be here.", pDPs->GetSheetCaches().hasCache(aSrcRange)); // Swap the two sheets. m_pDoc->MoveTab(1, 0); CPPUNIT_ASSERT_EQUAL_MESSAGE("Swapping the sheets shouldn't remove the cache.", size_t(1), pDPs->GetSheetCaches().size()); CPPUNIT_ASSERT_MESSAGE("Cache should have moved.", !pDPs->GetSheetCaches().hasCache(aSrcRange)); aSrcRange.aStart.SetTab(1); aSrcRange.aEnd.SetTab(1); CPPUNIT_ASSERT_MESSAGE("Cache should be here.", pDPs->GetSheetCaches().hasCache(aSrcRange)); pDPs->FreeTable(pDPObj2); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any data pilot table stored with the document.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more data cache.", size_t(0), pDPs->GetSheetCaches().size()); // Insert a brand new pivot table object once again, but this time, don't // create the output to avoid creating a data cache. m_pDoc->DeleteTab(1); m_pDoc->InsertTab(1, "Table"); pDPObj = createDPFromRange( m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), aFields, nFieldCount, false); bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new datapilot object into document", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); CPPUNIT_ASSERT_EQUAL_MESSAGE("Data cache shouldn't exist yet before creating the table output.", size_t(0), pDPs->GetSheetCaches().size()); // Now, "refresh" the table. This should still return a reference to self // even with the absence of data cache. aRefs.clear(); pDPs->ReloadCache(pDPObj, aRefs); CPPUNIT_ASSERT_MESSAGE("It should return the same object as a reference.", aRefs.size() == 1 && *aRefs.begin() == pDPObj); pDPs->FreeTable(pDPObj); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableLabels() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Software", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Version", sheet::DataPilotFieldOrientation_COLUMN, ScGeneralFunction::NONE, false }, { "1.2.3", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][3] = { { "LibreOffice", "3.3.0", "30" }, { "LibreOffice", "3.3.1", "20" }, { "LibreOffice", "3.4.0", "45" }, }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); SCROW nRow1 = aSrcRange.aStart.Row(), nRow2 = aSrcRange.aEnd.Row(); SCCOL nCol1 = aSrcRange.aStart.Col(), nCol2 = aSrcRange.aEnd.Col(); ScDPObject* pDPObj = createDPFromRange( m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), aFields, nFieldCount, false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new datapilot object into document", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][5] = { { "Sum - 1.2.3", "Version", nullptr, nullptr, nullptr }, { "Software", "3.3.0", "3.3.1", "3.4.0", "Total Result" }, { "LibreOffice", "30", "20", "45", "95" }, { "Total Result", "30", "20", "45", "95" } }; bSuccess = checkDPTableOutput<5>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableDateLabels() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Date", sheet::DataPilotFieldOrientation_COLUMN, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][3] = { { "Zena", "2011-1-1", "30" }, { "Yodel", "2011-1-2", "20" }, { "Xavior", "2011-1-3", "45" } }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); SCROW nRow1 = aSrcRange.aStart.Row(), nRow2 = aSrcRange.aEnd.Row(); SCCOL nCol1 = aSrcRange.aStart.Col(), nCol2 = aSrcRange.aEnd.Col(); ScDPObject* pDPObj = createDPFromRange( m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), aFields, nFieldCount, false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new datapilot object into document", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][5] = { { "Sum - Value", "Date", nullptr, nullptr, nullptr }, { "Name", "2011-01-01", "2011-01-02", "2011-01-03", "Total Result" }, { "Xavior", nullptr, nullptr, "45", "45" }, { "Yodel", nullptr, "20", nullptr, "20" }, { "Zena", "30", nullptr, nullptr, "30" }, { "Total Result", "30", "20", "45", "95" } }; bSuccess = checkDPTableOutput<5>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } { const char* const aChecks[] = { "2011-01-01", "2011-01-02", "2011-01-03" }; // Make sure those cells that contain dates are numeric. SCROW nRow = aOutRange.aStart.Row() + 1; nCol1 = aOutRange.aStart.Col() + 1; nCol2 = nCol1 + 2; for (SCCOL nCol = nCol1; nCol <= nCol2; ++nCol) { OUString aVal = m_pDoc->GetString(nCol, nRow, 1); CPPUNIT_ASSERT_MESSAGE("Cell value is not as expected.", aVal.equalsAscii(aChecks[nCol-nCol1])); CPPUNIT_ASSERT_MESSAGE("This cell contains a date value and is supposed to be numeric.", m_pDoc->HasValueData(nCol, nRow, 1)); } } pDPs->FreeTable(pDPObj); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableFilters() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_HIDDEN, ScGeneralFunction::NONE, false }, { "Group1", sheet::DataPilotFieldOrientation_HIDDEN, ScGeneralFunction::NONE, false }, { "Group2", sheet::DataPilotFieldOrientation_PAGE, ScGeneralFunction::NONE, false }, { "Val1", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false }, { "Val2", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][5] = { { "A", "1", "A", "1", "10" }, { "B", "1", "A", "1", "10" }, { "C", "1", "B", "1", "10" }, { "D", "1", "B", "1", "10" }, { "E", "2", "A", "1", "10" }, { "F", "2", "A", "1", "10" }, { "G", "2", "B", "1", "10" }, { "H", "2", "B", "1", "10" } }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); SCROW nRow1 = aSrcRange.aStart.Row(), nRow2 = aSrcRange.aEnd.Row(); SCCOL nCol1 = aSrcRange.aStart.Col(), nCol2 = aSrcRange.aEnd.Col(); ScDPObject* pDPObj = createDPFromRange( m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), aFields, nFieldCount, true); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new datapilot object into document", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Filter", nullptr }, { "Group2", "- all -" }, { nullptr, nullptr }, { "Data", nullptr }, { "Sum - Val1", "8" }, { "Sum - Val2", "80" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output (unfiltered)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } sc::AutoCalcSwitch aACSwitch(*m_pDoc, true); // turn on auto calculation. ScAddress aFormulaAddr = aOutRange.aEnd; aFormulaAddr.IncRow(2); m_pDoc->SetString(aFormulaAddr.Col(), aFormulaAddr.Row(), aFormulaAddr.Tab(), "=B6"); double fTest = m_pDoc->GetValue(aFormulaAddr); ASSERT_DOUBLES_EQUAL_MESSAGE("Incorrect formula value that references a cell in the pivot table output.", 80.0, fTest); // Set current page of 'Group2' to 'A'. pDPObj->BuildAllDimensionMembers(); ScDPSaveData aSaveData(*pDPObj->GetSaveData()); ScDPSaveDimension* pPageDim = aSaveData.GetDimensionByName( "Group2"); CPPUNIT_ASSERT_MESSAGE("Dimension not found", pPageDim); OUString aPage("A"); pPageDim->SetCurrentPage(&aPage); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Filter", nullptr }, { "Group2", "A" }, { nullptr, nullptr }, { "Data", nullptr }, { "Sum - Val1", "4" }, { "Sum - Val2", "40" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output (filtered by page)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } fTest = m_pDoc->GetValue(aFormulaAddr); ASSERT_DOUBLES_EQUAL_MESSAGE("Incorrect formula value that references a cell in the pivot table output.", 40.0, fTest); // Set query filter. ScSheetSourceDesc aDesc(*pDPObj->GetSheetDesc()); ScQueryParam aQueryParam(aDesc.GetQueryParam()); CPPUNIT_ASSERT_MESSAGE("There should be at least one query entry.", aQueryParam.GetEntryCount() > 0); ScQueryEntry& rEntry = aQueryParam.GetEntry(0); rEntry.bDoQuery = true; rEntry.nField = 1; // Group1 rEntry.GetQueryItem().mfVal = 1; aDesc.SetQueryParam(aQueryParam); pDPObj->SetSheetDesc(aDesc); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Filter", nullptr }, { "Group2", "A" }, { nullptr, nullptr }, { "Data", nullptr }, { "Sum - Val1", "2" }, { "Sum - Val2", "20" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output (filtered by query)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } fTest = m_pDoc->GetValue(aFormulaAddr); ASSERT_DOUBLES_EQUAL_MESSAGE("Incorrect formula value that references a cell in the pivot table output.", 20.0, fTest); // Set the current page of 'Group2' back to '- all -'. The query filter // should still be in effect. pPageDim->SetCurrentPage(nullptr); // Remove the page. pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Filter", nullptr }, { "Group2", "- all -" }, { nullptr, nullptr }, { "Data", nullptr }, { "Sum - Val1", "4" }, { "Sum - Val2", "40" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output (filtered by page)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any data pilot table stored with the document.", size_t(0), pDPs->GetCount()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableNamedSource() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Group", sheet::DataPilotFieldOrientation_COLUMN, ScGeneralFunction::NONE, false }, { "Score", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][3] = { { "Andy", "A", "30" }, { "Bruce", "A", "20" }, { "Charlie", "B", "45" }, { "David", "B", "12" }, { "Edward", "C", "8" }, { "Frank", "C", "15" }, }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); // Insert the raw data. ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); OUString aRangeStr(aSrcRange.Format(ScRefFlags::RANGE_ABS_3D, m_pDoc)); // Name this range. OUString aRangeName("MyData"); ScRangeName* pNames = m_pDoc->GetRangeName(); CPPUNIT_ASSERT_MESSAGE("Failed to get global range name container.", pNames); ScRangeData* pName = new ScRangeData( m_pDoc, aRangeName, aRangeStr); bool bSuccess = pNames->insert(pName); CPPUNIT_ASSERT_MESSAGE("Failed to insert a new name.", bSuccess); ScSheetSourceDesc aSheetDesc(m_pDoc); aSheetDesc.SetRangeName(aRangeName); ScDPObject* pDPObj = createDPFromSourceDesc(m_pDoc, aSheetDesc, aFields, nFieldCount, false); CPPUNIT_ASSERT_MESSAGE("Failed to create a new pivot table object.", pDPObj); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][5] = { { "Sum - Score", "Group", nullptr, nullptr, nullptr }, { "Name", "A", "B", "C", "Total Result" }, { "Andy", "30", nullptr, nullptr, "30" }, { "Bruce", "20", nullptr, nullptr, "20" }, { "Charlie", nullptr, "45", nullptr, "45" }, { "David", nullptr, "12", nullptr, "12" }, { "Edward", nullptr, nullptr, "8", "8" }, { "Frank", nullptr, nullptr, "15", "15" }, { "Total Result", "50", "57", "23", "130" } }; bSuccess = checkDPTableOutput<5>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } CPPUNIT_ASSERT_MESSAGE("There should be one named range data cache.", pDPs->GetNameCaches().size() == 1 && pDPs->GetSheetCaches().size() == 0); // Move the table with pivot table to the left of the source data sheet. m_pDoc->MoveTab(1, 0); OUString aTabName; m_pDoc->GetName(0, aTabName); CPPUNIT_ASSERT_EQUAL_MESSAGE( "Wrong sheet name.", OUString("Table"), aTabName); CPPUNIT_ASSERT_EQUAL_MESSAGE("Pivot table output is on the wrong sheet!", static_cast(0), pDPObj->GetOutRange().aStart.Tab()); CPPUNIT_ASSERT_MESSAGE("Moving the pivot table to another sheet shouldn't have changed the cache state.", pDPs->GetNameCaches().size() == 1 && pDPs->GetSheetCaches().size() == 0); const ScSheetSourceDesc* pDesc = pDPObj->GetSheetDesc(); CPPUNIT_ASSERT_MESSAGE("Sheet source description doesn't exist.", pDesc); CPPUNIT_ASSERT_EQUAL_MESSAGE("Named source range has been altered unexpectedly!", pDesc->GetRangeName(), aRangeName); CPPUNIT_ASSERT_MESSAGE("Cache should exist.", pDPs->GetNameCaches().hasCache(aRangeName)); pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetNameCaches().size()); pNames->clear(); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableCache() { m_pDoc->InsertTab(0, "Data"); // Raw data const char* aData[][3] = { { "F1", "F2", "F3" }, { "Z", "A", "30" }, { "R", "A", "20" }, { "A", "B", "45" }, { "F", "B", "12" }, { "Y", "C", "8" }, { "12", "C", "15" }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPCache aCache(m_pDoc); aCache.InitFromDoc(m_pDoc, aDataRange); long nDimCount = aCache.GetColumnCount(); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension count.", 3L, nDimCount); OUString aDimName = aCache.GetDimensionName(0); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension name", OUString("F1"), aDimName); aDimName = aCache.GetDimensionName(1); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension name", OUString("F2"), aDimName); aDimName = aCache.GetDimensionName(2); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension name", OUString("F3"), aDimName); // In each dimension, member ID values also represent their sort order (in // source dimensions only, not in group dimensions). Value items are // sorted before string ones. Also, no duplicate dimension members should // exist. // Dimension 0 - a mix of strings and values. long nMemCount = aCache.GetDimMemberCount(0); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension member count", 6L, nMemCount); const ScDPItemData* pItem = aCache.GetItemDataById(0, 0); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 12); pItem = aCache.GetItemDataById(0, 1); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "A"); pItem = aCache.GetItemDataById(0, 2); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "F"); pItem = aCache.GetItemDataById(0, 3); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "R"); pItem = aCache.GetItemDataById(0, 4); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "Y"); pItem = aCache.GetItemDataById(0, 5); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "Z"); pItem = aCache.GetItemDataById(0, 6); CPPUNIT_ASSERT_MESSAGE("wrong item value", !pItem); // Dimension 1 - duplicate values in source. nMemCount = aCache.GetDimMemberCount(1); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension member count", 3L, nMemCount); pItem = aCache.GetItemDataById(1, 0); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "A"); pItem = aCache.GetItemDataById(1, 1); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "B"); pItem = aCache.GetItemDataById(1, 2); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::String && pItem->GetString() == "C"); pItem = aCache.GetItemDataById(1, 3); CPPUNIT_ASSERT_MESSAGE("wrong item value", !pItem); // Dimension 2 - values only. nMemCount = aCache.GetDimMemberCount(2); CPPUNIT_ASSERT_EQUAL_MESSAGE("wrong dimension member count", 6L, nMemCount); pItem = aCache.GetItemDataById(2, 0); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 8); pItem = aCache.GetItemDataById(2, 1); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 12); pItem = aCache.GetItemDataById(2, 2); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 15); pItem = aCache.GetItemDataById(2, 3); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 20); pItem = aCache.GetItemDataById(2, 4); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 30); pItem = aCache.GetItemDataById(2, 5); CPPUNIT_ASSERT_MESSAGE("wrong item value", pItem && pItem->GetType() == ScDPItemData::Value && pItem->GetValue() == 45); pItem = aCache.GetItemDataById(2, 6); CPPUNIT_ASSERT_MESSAGE("wrong item value", !pItem); { // Check the integrity of the source data. ScDPItemData aTest; long nDim; { // Dimension 0: Z, R, A, F, Y, 12 nDim = 0; const char* aChecks[] = { "Z", "R", "A", "F", "Y" }; for (size_t i = 0; i < SAL_N_ELEMENTS(aChecks); ++i) { pItem = aCache.GetItemDataById(nDim, aCache.GetItemDataId(nDim, i, false)); aTest.SetString(OUString::createFromAscii(aChecks[i])); CPPUNIT_ASSERT_MESSAGE("wrong data value", pItem && *pItem == aTest); } pItem = aCache.GetItemDataById(nDim, aCache.GetItemDataId(nDim, 5, false)); aTest.SetValue(12); CPPUNIT_ASSERT_MESSAGE("wrong data value", pItem && *pItem == aTest); } { // Dimension 1: A, A, B, B, C, C nDim = 1; const char* aChecks[] = { "A", "A", "B", "B", "C", "C" }; for (size_t i = 0; i < SAL_N_ELEMENTS(aChecks); ++i) { pItem = aCache.GetItemDataById(nDim, aCache.GetItemDataId(nDim, i, false)); aTest.SetString(OUString::createFromAscii(aChecks[i])); CPPUNIT_ASSERT_MESSAGE("wrong data value", pItem && *pItem == aTest); } } { // Dimension 2: 30, 20, 45, 12, 8, 15 nDim = 2; double aChecks[] = { 30, 20, 45, 12, 8, 15 }; for (size_t i = 0; i < SAL_N_ELEMENTS(aChecks); ++i) { pItem = aCache.GetItemDataById(nDim, aCache.GetItemDataId(nDim, i, false)); aTest.SetValue(aChecks[i]); CPPUNIT_ASSERT_MESSAGE("wrong data value", pItem && *pItem == aTest); } } } // Now, on to testing the filtered cache. { // Non-filtered cache - everything should be visible. ScDPFilteredCache aFilteredCache(aCache); aFilteredCache.fillTable(); sal_Int32 nRows = aFilteredCache.getRowSize(); CPPUNIT_ASSERT_MESSAGE("Wrong dimension.", nRows == 6 && aFilteredCache.getColSize() == 3); for (sal_Int32 i = 0; i < nRows; ++i) { if (!aFilteredCache.isRowActive(i)) { std::ostringstream os; os << "Row " << i << " should be visible but it isn't."; CPPUNIT_ASSERT_MESSAGE(os.str(), false); } } } // TODO : Add test for filtered caches. m_pDoc->DeleteTab(0); } void Test::testPivotTableDuplicateDataFields() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "A", "45" }, { "A", "5" }, { "A", "41" }, { "A", "49" }, { "A", "4" }, { "B", "33" }, { "B", "84" }, { "B", "74" }, { "B", "8" }, { "B", "68" } }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::COUNT, false } }; ScAddress aPos(2,2,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][3] = { { "Name", "Data", nullptr }, { "A", "Sum - Value", "144" }, { nullptr, "Count - Value", "5" }, { "B", "Sum - Value", "267" }, { nullptr, "Count - Value", "5" }, { "Total Sum - Value", nullptr, "411" }, { "Total Count - Value", nullptr, "10" }, }; bSuccess = checkDPTableOutput<3>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // Move the data layout dimension from row to column. ScDPSaveData* pSaveData = pDPObj->GetSaveData(); CPPUNIT_ASSERT_MESSAGE("No save data!?", pSaveData); ScDPSaveDimension* pDataLayout = pSaveData->GetDataLayoutDimension(); CPPUNIT_ASSERT_MESSAGE("No data layout dimension.", pDataLayout); pDataLayout->SetOrientation(sheet::DataPilotFieldOrientation_COLUMN); pDPObj->SetSaveData(*pSaveData); // Refresh the table output. aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][3] = { { nullptr, "Data", nullptr }, { "Name", "Sum - Value", "Count - Value" }, { "A", "144", "5" }, { "B", "267", "5" }, { "Total Result", "411", "10" } }; bSuccess = checkDPTableOutput<3>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } ScPivotParam aParam; pDPObj->FillLabelData(aParam); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be exactly 4 labels (2 original, 1 data layout, and 1 duplicate dimensions).", size_t(4), aParam.maLabelArray.size()); pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableNormalGrouping() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "A", "1" }, { "B", "2" }, { "C", "3" }, { "D", "4" }, { "E", "5" }, { "F", "6" }, { "G", "7" } }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "1" }, { "B", "2" }, { "C", "3" }, { "D", "4" }, { "E", "5" }, { "F", "6" }, { "G", "7" }, { "Total Result", "28" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Initial output without grouping"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } ScDPSaveData* pSaveData = pDPObj->GetSaveData(); CPPUNIT_ASSERT_MESSAGE("No save data !?", pSaveData); ScDPDimensionSaveData* pDimData = pSaveData->GetDimensionData(); CPPUNIT_ASSERT_MESSAGE("Failed to create dimension data.", pDimData); OUString aGroupPrefix("Group"); OUString aBaseDimName("Name"); OUString aGroupDimName = pDimData->CreateGroupDimName(aBaseDimName, *pDPObj, false, nullptr); { // Group A, B and C together. ScDPSaveGroupDimension aGroupDim(aBaseDimName, aGroupDimName); OUString aGroupName = aGroupDim.CreateGroupName(aGroupPrefix); CPPUNIT_ASSERT_EQUAL_MESSAGE("Unexpected group name", OUString("Group1"), aGroupName); ScDPSaveGroupItem aGroup(aGroupName); aGroup.AddElement("A"); aGroup.AddElement("B"); aGroup.AddElement("C"); aGroupDim.AddGroupItem(aGroup); pDimData->AddGroupDimension(aGroupDim); ScDPSaveDimension* pDim = pSaveData->GetDimensionByName(aGroupDimName); pDim->SetOrientation(sheet::DataPilotFieldOrientation_ROW); pSaveData->SetPosition(pDim, 0); // Set it before the base dimension. } pDPObj->SetSaveData(*pSaveData); aOutRange = refreshGroups(pDPs, pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][3] = { { "Name2", "Name", "Sum - Value" }, { "D", "D", "4" }, { "E", "E", "5" }, { "F", "F", "6" }, { "G", "G", "7" }, { "Group1", "A", "1" }, { nullptr, "B", "2" }, { nullptr, "C", "3" }, { "Total Result", nullptr, "28" } }; bSuccess = checkDPTableOutput<3>(m_pDoc, aOutRange, aOutputCheck, "A, B, C grouped by Group1."); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pSaveData = pDPObj->GetSaveData(); pDimData = pSaveData->GetDimensionData(); { // Group D, E, F together. ScDPSaveGroupDimension* pGroupDim = pDimData->GetGroupDimAccForBase(aBaseDimName); CPPUNIT_ASSERT_MESSAGE("There should be an existing group dimension.", pGroupDim); OUString aGroupName = pGroupDim->CreateGroupName(aGroupPrefix); CPPUNIT_ASSERT_EQUAL_MESSAGE("Unexpected group name", OUString("Group2"), aGroupName); ScDPSaveGroupItem aGroup(aGroupName); aGroup.AddElement("D"); aGroup.AddElement("E"); aGroup.AddElement("F"); pGroupDim->AddGroupItem(aGroup); } pDPObj->SetSaveData(*pSaveData); aOutRange = refreshGroups(pDPs, pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][3] = { { "Name2", "Name", "Sum - Value" }, { "G", "G", "7" }, { "Group1", "A", "1" }, { nullptr, "B", "2" }, { nullptr, "C", "3" }, { "Group2", "D", "4" }, { nullptr, "E", "5" }, { nullptr, "F", "6" }, { "Total Result", nullptr, "28" } }; bSuccess = checkDPTableOutput<3>(m_pDoc, aOutRange, aOutputCheck, "D, E, F grouped by Group2."); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableNumberGrouping() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Order", "Score" }, { "43", "171" }, { "18", "20" }, { "69", "159" }, { "95", "19" }, { "96", "163" }, { "46", "70" }, { "22", "36" }, { "81", "49" }, { "54", "61" }, { "39", "62" }, { "86", "17" }, { "34", "0" }, { "30", "25" }, { "24", "103" }, { "16", "59" }, { "24", "119" }, { "15", "86" }, { "69", "170" } }; // Dimension definition DPFieldDef aFields[] = { { "Order", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Score", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScDPSaveData* pSaveData = pDPObj->GetSaveData(); CPPUNIT_ASSERT_MESSAGE("No save data !?", pSaveData); ScDPDimensionSaveData* pDimData = pSaveData->GetDimensionData(); CPPUNIT_ASSERT_MESSAGE("No dimension data !?", pDimData); { ScDPNumGroupInfo aInfo; aInfo.mbEnable = true; aInfo.mbAutoStart = false; aInfo.mbAutoEnd = false; aInfo.mbDateValues = false; aInfo.mbIntegerOnly = true; aInfo.mfStart = 30; aInfo.mfEnd = 60; aInfo.mfStep = 10; ScDPSaveNumGroupDimension aGroup("Order", aInfo); pDimData->AddNumGroupDimension(aGroup); } pDPObj->SetSaveData(*pSaveData); ScRange aOutRange = refreshGroups(pDPs, pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Order", "Sum - Score" }, { "<30", "423" }, { "30-39", "87" }, { "40-49", "241" }, { "50-60", "61" }, { ">60", "577" }, { "Total Result", "1389" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Order grouped by numbers"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableDateGrouping() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Date", "Value" }, { "2011-01-01", "1" }, { "2011-03-02", "2" }, { "2012-01-04", "3" }, { "2012-02-23", "4" }, { "2012-02-24", "5" }, { "2012-03-15", "6" }, { "2011-09-03", "7" }, { "2012-12-25", "8" } }; // Dimension definition DPFieldDef aFields[] = { { "Date", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScDPSaveData* pSaveData = pDPObj->GetSaveData(); CPPUNIT_ASSERT_MESSAGE("No save data !?", pSaveData); ScDPDimensionSaveData* pDimData = pSaveData->GetDimensionData(); CPPUNIT_ASSERT_MESSAGE("No dimension data !?", pDimData); OUString aBaseDimName("Date"); ScDPNumGroupInfo aInfo; aInfo.mbEnable = true; aInfo.mbAutoStart = true; aInfo.mbAutoEnd = true; { // Turn the Date dimension into months. The first of the date // dimensions is always a number-group dimension which replaces the // original dimension. ScDPSaveNumGroupDimension aGroup(aBaseDimName, aInfo, sheet::DataPilotFieldGroupBy::MONTHS); pDimData->AddNumGroupDimension(aGroup); } { // Add quarter dimension. This will be an additional dimension. OUString aGroupDimName = pDimData->CreateDateGroupDimName( sheet::DataPilotFieldGroupBy::QUARTERS, *pDPObj, true, nullptr); ScDPSaveGroupDimension aGroupDim(aBaseDimName, aGroupDimName); aGroupDim.SetDateInfo(aInfo, sheet::DataPilotFieldGroupBy::QUARTERS); pDimData->AddGroupDimension(aGroupDim); // Set orientation. ScDPSaveDimension* pDim = pSaveData->GetDimensionByName(aGroupDimName); pDim->SetOrientation(sheet::DataPilotFieldOrientation_ROW); pSaveData->SetPosition(pDim, 0); // set it to the left end. } { // Add year dimension. This is a new dimension also. OUString aGroupDimName = pDimData->CreateDateGroupDimName( sheet::DataPilotFieldGroupBy::YEARS, *pDPObj, true, nullptr); ScDPSaveGroupDimension aGroupDim(aBaseDimName, aGroupDimName); aGroupDim.SetDateInfo(aInfo, sheet::DataPilotFieldGroupBy::YEARS); pDimData->AddGroupDimension(aGroupDim); // Set orientation. ScDPSaveDimension* pDim = pSaveData->GetDimensionByName(aGroupDimName); pDim->SetOrientation(sheet::DataPilotFieldOrientation_ROW); pSaveData->SetPosition(pDim, 0); // set it to the left end. } pDPObj->SetSaveData(*pSaveData); ScRange aOutRange = refreshGroups(pDPs, pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][4] = { { "Years", "Quarters", "Date", "Sum - Value" }, { "2011", "Q1", "Jan", "1" }, { nullptr, nullptr, "Mar", "2" }, { nullptr, "Q3", "Sep", "7" }, { "2012", "Q1", "Jan", "3" }, { nullptr, nullptr, "Feb", "9" }, { nullptr, nullptr, "Mar", "6" }, { nullptr, "Q4", "Dec", "8" }, { "Total Result", nullptr, nullptr, "36" }, }; bSuccess = checkDPTableOutput<4>(m_pDoc, aOutRange, aOutputCheck, "Years, quarters and months date groups."); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } { // Let's hide year 2012. pSaveData = pDPObj->GetSaveData(); ScDPSaveDimension* pDim = pSaveData->GetDimensionByName("Years"); CPPUNIT_ASSERT_MESSAGE("Years dimension should exist.", pDim); ScDPSaveMember* pMem = pDim->GetMemberByName("2012"); CPPUNIT_ASSERT_MESSAGE("Member should exist.", pMem); pMem->SetIsVisible(false); } pDPObj->SetSaveData(*pSaveData); pDPObj->ReloadGroupTableData(); pDPObj->InvalidateData(); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][4] = { { "Years", "Quarters", "Date", "Sum - Value" }, { "2011", "Q1", "Jan", "1" }, { nullptr, nullptr, "Mar", "2" }, { nullptr, "Q3", "Sep", "7" }, { "Total Result", nullptr, nullptr, "10" }, }; bSuccess = checkDPTableOutput<4>(m_pDoc, aOutRange, aOutputCheck, "Year 2012 data now hidden"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // Remove all date grouping. The source dimension "Date" has two // external dimensions ("Years" and "Quarters") and one internal ("Date" // the same name but different hierarchy). Remove all of them. pSaveData = pDPObj->GetSaveData(); pSaveData->RemoveAllGroupDimensions(aBaseDimName); pDPObj->SetSaveData(*pSaveData); pDPObj->ReloadGroupTableData(); pDPObj->InvalidateData(); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Date", "Sum - Value" }, { "2011-01-01", "1" }, { "2011-03-02", "2" }, { "2011-09-03", "7" }, { "2012-01-04", "3" }, { "2012-02-23", "4" }, { "2012-02-24", "5" }, { "2012-03-15", "6" }, { "2012-12-25", "8" }, { "Total Result", "36" } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Remove all date grouping."); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableEmptyRows() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "A", "1" }, { "B", "2" }, { "C", "3" }, { "D", "4" }, }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); // Extend the range downward to include some trailing empty rows. aDataRange.aEnd.IncRow(2); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "1" }, { "B", "2" }, { "C", "3" }, { "D", "4" }, { "(empty)", nullptr }, { "Total Result", "10" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Include empty rows"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // This time, ignore empty rows. ScDPSaveData* pSaveData = pDPObj->GetSaveData(); CPPUNIT_ASSERT_MESSAGE("Save data doesn't exist.", pSaveData); pSaveData->SetIgnoreEmptyRows(true); pDPObj->ClearTableData(); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "1" }, { "B", "2" }, { "C", "3" }, { "D", "4" }, { "Total Result", "10" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Ignore empty rows"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // Modify the source to remove member 'A', then refresh the table. m_pDoc->SetString(1, 2, 0, "B"); std::set aRefs; const char* pErr = pDPs->ReloadCache(pDPObj, aRefs); CPPUNIT_ASSERT_MESSAGE("Failed to reload cache.", !pErr); CPPUNIT_ASSERT_MESSAGE("There should only be one pivot table linked to this cache.", aRefs.size() == 1 && *aRefs.begin() == pDPObj); pDPObj->ClearTableData(); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "B", "3" }, { "C", "3" }, { "D", "4" }, { "Total Result", "10" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Ignore empty rows"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableTextNumber() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "0001", "1" }, { "0002", "2" }, { "0003", "3" }, { "0004", "4" }, }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; // Insert raw data such that the first column values are entered as text. for (size_t nRow = 0; nRow < SAL_N_ELEMENTS(aData); ++nRow) { ScSetStringParam aParam; aParam.mbDetectNumberFormat = false; aParam.meSetTextNumFormat = ScSetStringParam::Always; m_pDoc->SetString(0, nRow, 0, OUString::createFromAscii(aData[nRow][0]), &aParam); aParam.meSetTextNumFormat = ScSetStringParam::Never; m_pDoc->SetString(1, nRow, 0, OUString::createFromAscii(aData[nRow][1]), &aParam); if (nRow == 0) // Don't check the header row. continue; // Check the data rows. CPPUNIT_ASSERT_MESSAGE("This cell is supposed to be text.", m_pDoc->HasStringData(0, nRow, 0)); CPPUNIT_ASSERT_MESSAGE("This cell is supposed to be numeric.", m_pDoc->HasValueData(1, nRow, 0)); } ScRange aDataRange(0, 0, 0, 1, 4, 0); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "0001", "1" }, { "0002", "2" }, { "0003", "3" }, { "0004", "4" }, { "Total Result", "10" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Text number field members"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // Set the Name dimension to page dimension. pDPObj->BuildAllDimensionMembers(); ScDPSaveData aSaveData(*pDPObj->GetSaveData()); ScDPSaveDimension* pDim = aSaveData.GetExistingDimensionByName("Name"); CPPUNIT_ASSERT(pDim); pDim->SetOrientation(sheet::DataPilotFieldOrientation_PAGE); OUString aVisiblePage("0004"); pDim->SetCurrentPage(&aVisiblePage); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "0004" }, { nullptr, nullptr }, { "Sum - Value", nullptr }, { "4", nullptr } }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Text number field members"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableCaseInsensitiveStrings() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "A", "1" }, { "a", "2" }, }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "3" }, { "Total Result", "3" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Case insensitive strings"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableNumStability() { FormulaGrammarSwitch aFGSwitch(m_pDoc, formula::FormulaGrammar::GRAM_ENGLISH_XL_R1C1); // Raw Data const char* aData[][4] = { { "Name", "Time Start", "Time End", "Total" }, { "Sam", "07:48 AM", "09:00 AM", "=RC[-1]-RC[-2]" }, { "Sam", "09:00 AM", "10:30 AM", "=RC[-1]-RC[-2]" }, { "Sam", "10:30 AM", "12:30 PM", "=RC[-1]-RC[-2]" }, { "Sam", "12:30 PM", "01:00 PM", "=RC[-1]-RC[-2]" }, { "Sam", "01:00 PM", "01:30 PM", "=RC[-1]-RC[-2]" }, { "Sam", "01:30 PM", "02:00 PM", "=RC[-1]-RC[-2]" }, { "Sam", "02:00 PM", "07:15 PM", "=RC[-1]-RC[-2]" }, { "Sam", "07:47 AM", "09:00 AM", "=RC[-1]-RC[-2]" }, { "Sam", "09:00 AM", "10:00 AM", "=RC[-1]-RC[-2]" }, { "Sam", "10:00 AM", "11:00 AM", "=RC[-1]-RC[-2]" }, { "Sam", "11:00 AM", "11:30 AM", "=RC[-1]-RC[-2]" }, { "Sam", "11:30 AM", "12:45 PM", "=RC[-1]-RC[-2]" }, { "Sam", "12:45 PM", "01:15 PM", "=RC[-1]-RC[-2]" }, { "Sam", "01:15 PM", "02:30 PM", "=RC[-1]-RC[-2]" }, { "Sam", "02:30 PM", "02:45 PM", "=RC[-1]-RC[-2]" }, { "Sam", "02:45 PM", "04:30 PM", "=RC[-1]-RC[-2]" }, { "Sam", "04:30 PM", "06:00 PM", "=RC[-1]-RC[-2]" }, { "Sam", "06:00 PM", "07:15 PM", "=RC[-1]-RC[-2]" }, { "Mike", "06:15 AM", "08:30 AM", "=RC[-1]-RC[-2]" }, { "Mike", "08:30 AM", "10:03 AM", "=RC[-1]-RC[-2]" }, { "Mike", "10:03 AM", "12:00 PM", "=RC[-1]-RC[-2]" }, { "Dennis", "11:00 AM", "01:00 PM", "=RC[-1]-RC[-2]" }, { "Dennis", "01:00 PM", "02:00 PM", "=RC[-1]-RC[-2]" } }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Total", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); size_t const nRowCount = SAL_N_ELEMENTS(aData); ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, nRowCount); // Insert formulas to manually calculate sums for each name. m_pDoc->SetString(aDataRange.aStart.Col(), aDataRange.aEnd.Row()+1, aDataRange.aStart.Tab(), "=SUMIF(R[-23]C:R[-1]C;\"Dennis\";R[-23]C[3]:R[-1]C[3])"); m_pDoc->SetString(aDataRange.aStart.Col(), aDataRange.aEnd.Row()+2, aDataRange.aStart.Tab(), "=SUMIF(R[-24]C:R[-2]C;\"Mike\";R[-24]C[3]:R[-2]C[3])"); m_pDoc->SetString(aDataRange.aStart.Col(), aDataRange.aEnd.Row()+3, aDataRange.aStart.Tab(), "=SUMIF(R[-25]C:R[-3]C;\"Sam\";R[-25]C[3]:R[-3]C[3])"); m_pDoc->CalcAll(); // Get correct sum values. double fDennisTotal = m_pDoc->GetValue(aDataRange.aStart.Col(), aDataRange.aEnd.Row()+1, aDataRange.aStart.Tab()); double fMikeTotal = m_pDoc->GetValue(aDataRange.aStart.Col(), aDataRange.aEnd.Row()+2, aDataRange.aStart.Tab()); double fSamTotal = m_pDoc->GetValue(aDataRange.aStart.Col(), aDataRange.aEnd.Row()+3, aDataRange.aStart.Tab()); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); // Manually check the total value for each name. // // +--------------+----------------+ // | Name | | // +--------------+----------------+ // | Dennis | | // +--------------+----------------+ // | Mike | | // +--------------+----------------+ // | Sam | | // +--------------+----------------+ // | Total Result | ... | // +--------------+----------------+ aPos = aOutRange.aStart; aPos.IncCol(); aPos.IncRow(); double fTest = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_MESSAGE("Incorrect value for Dennis.", rtl::math::approxEqual(fTest, fDennisTotal)); aPos.IncRow(); fTest = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_MESSAGE("Incorrect value for Mike.", rtl::math::approxEqual(fTest, fMikeTotal)); aPos.IncRow(); fTest = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_MESSAGE("Incorrect value for Sam.", rtl::math::approxEqual(fTest, fSamTotal)); pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableFieldReference() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "A", "1" }, { "B", "2" }, { "C", "4" }, { "D", "8" }, }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "1" }, { "B", "2" }, { "C", "4" }, { "D", "8" }, { "Total Result", "15" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Field reference (none)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } ScDPSaveData aSaveData = *pDPObj->GetSaveData(); sheet::DataPilotFieldReference aFieldRef; aFieldRef.ReferenceType = sheet::DataPilotFieldReferenceType::ITEM_DIFFERENCE; aFieldRef.ReferenceField = "Name"; aFieldRef.ReferenceItemType = sheet::DataPilotFieldReferenceItemType::NAMED; aFieldRef.ReferenceItemName = "A"; ScDPSaveDimension* pDim = aSaveData.GetDimensionByName("Value"); CPPUNIT_ASSERT_MESSAGE("Failed to retrieve dimension 'Value'.", pDim); pDim->SetReferenceValue(&aFieldRef); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", nullptr }, { "B", "1" }, { "C", "3" }, { "D", "7" }, { "Total Result", nullptr }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Field reference (difference from)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } aFieldRef.ReferenceType = sheet::DataPilotFieldReferenceType::ITEM_PERCENTAGE; pDim->SetReferenceValue(&aFieldRef); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "100.00%" }, { "B", "200.00%" }, { "C", "400.00%" }, { "D", "800.00%" }, { "Total Result", nullptr }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Field reference (% of)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } aFieldRef.ReferenceType = sheet::DataPilotFieldReferenceType::ITEM_PERCENTAGE_DIFFERENCE; pDim->SetReferenceValue(&aFieldRef); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", nullptr }, { "B", "100.00%" }, { "C", "300.00%" }, { "D", "700.00%" }, { "Total Result", nullptr }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Field reference (% difference from)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } aFieldRef.ReferenceType = sheet::DataPilotFieldReferenceType::RUNNING_TOTAL; pDim->SetReferenceValue(&aFieldRef); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "1" }, { "B", "3" }, { "C", "7" }, { "D", "15" }, { "Total Result", nullptr }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Field reference (Running total)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } aFieldRef.ReferenceType = sheet::DataPilotFieldReferenceType::COLUMN_PERCENTAGE; pDim->SetReferenceValue(&aFieldRef); pDPObj->SetSaveData(aSaveData); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "6.67%" }, { "B", "13.33%" }, { "C", "26.67%" }, { "D", "53.33%" }, { "Total Result", "100.00%" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Field reference (% of column)"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableDocFunc() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "Sun", "1" }, { "Oracle", "2" }, { "Red Hat", "4" }, { "SUSE", "8" }, { "Apple", "16" }, { "Microsoft", "32" }, }; // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); std::unique_ptr pDPObj(createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false)); CPPUNIT_ASSERT_MESSAGE("Failed to create pivot table object.", pDPObj); // Create a new pivot table output. ScDBDocFunc aFunc(getDocShell()); bool bSuccess = aFunc.CreatePivotTable(*pDPObj, false, true); CPPUNIT_ASSERT_MESSAGE("Failed to create pivot table output via ScDBDocFunc.", bSuccess); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); CPPUNIT_ASSERT_MESSAGE("Failed to get pivot table collection.", pDPs); CPPUNIT_ASSERT_EQUAL(static_cast(1), pDPs->GetCount()); ScDPObject* pDPObject = &(*pDPs)[0]; ScRange aOutRange = pDPObject->GetOutRange(); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "Apple", "16" }, { "Microsoft", "32" }, { "Oracle", "2" }, { "Red Hat", "4" }, { "Sun", "1" }, { "SUSE", "8" }, { "Total Result", "63" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Pivot table created via ScDBDocFunc"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // Remove this pivot table output. This should also clear the pivot cache // it was referencing. bSuccess = aFunc.RemovePivotTable(*pDPObject, false, true); CPPUNIT_ASSERT_MESSAGE("Failed to remove pivot table output via ScDBDocFunc.", bSuccess); CPPUNIT_ASSERT_EQUAL(static_cast(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL(static_cast(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testFuncGETPIVOTDATA() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][2] = { { "Name", "Value" }, { "A", "1" }, { "A", "2" }, { "A", "3" }, { "B", "4" }, { "B", "5" }, { "B", "6" }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = nullptr; { // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; pDPObj = createDPFromRange(m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); } ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][2] = { { "Name", "Sum - Value" }, { "A", "6" }, { "B", "15" }, { "Total Result", "21" }, }; bSuccess = checkDPTableOutput<2>(m_pDoc, aOutRange, aOutputCheck, "Pivot table created for GETPIVOTDATA"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } aPos = aOutRange.aEnd; aPos.IncRow(2); // Move 2 rows down from the table output. OUString aPivotPosStr(aOutRange.aStart.Format(ScRefFlags::ADDR_ABS)); sc::AutoCalcSwitch aSwitch(*m_pDoc, true); // turn autocalc on. // First, get the grand total. OUString aFormula("=GETPIVOTDATA(\"Value\";"); aFormula += aPivotPosStr; aFormula += ")"; m_pDoc->SetString(aPos, aFormula); double fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(21.0, fVal); // Get the subtotal for 'A'. aFormula = "=GETPIVOTDATA(\"Value\";" + aPivotPosStr + ";\"Name\";\"A\")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(6.0, fVal); // Get the subtotal for 'B'. aFormula = "=GETPIVOTDATA(\"Value\";" + aPivotPosStr + ";\"Name\";\"B\")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(15.0, fVal); clearRange(m_pDoc, aPos); // Delete the formula. pDPs->FreeTable(pDPObj); { // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::COUNT, false }, }; pDPObj = createDPFromRange(m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); } bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("InsertNewTable failed", bSuccess); aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][3] = { { "Name", "Data", nullptr }, { "A", "Sum - Value", "6" }, { nullptr, "Count - Value", "3" }, { "B", "Sum - Value", "15" }, { nullptr, "Count - Value", "3" }, { "Total Sum - Value", nullptr, "21" }, { "Total Count - Value", nullptr, "6" }, }; bSuccess = checkDPTableOutput<3>(m_pDoc, aOutRange, aOutputCheck, "Pivot table refreshed"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } aPos = aOutRange.aEnd; aPos.IncRow(2); // move 2 rows down from the output. aPivotPosStr = aOutRange.aStart.Format(ScRefFlags::ADDR_ABS); // First, get the grand totals. aFormula = ("=GETPIVOTDATA(\"Sum - Value\";") + aPivotPosStr + ")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(21.0, fVal); aFormula = ("=GETPIVOTDATA(\"Count - Value\";") + aPivotPosStr + ")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(6.0, fVal); // Get the subtotals for 'A'. aFormula = "=GETPIVOTDATA(\"Sum - Value\";" + aPivotPosStr + ";\"Name\";\"A\")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(6.0, fVal); aFormula = "=GETPIVOTDATA(\"Count - Value\";" + aPivotPosStr + ";\"Name\";\"A\")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(3.0, fVal); // Get the subtotals for 'B'. aFormula = "=GETPIVOTDATA(\"Sum - Value\";" + aPivotPosStr + ";\"Name\";\"B\")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(15.0, fVal); aFormula = "=GETPIVOTDATA(\"Count - Value\";" + aPivotPosStr + ";\"Name\";\"B\")"; m_pDoc->SetString(aPos, aFormula); fVal = m_pDoc->GetValue(aPos); CPPUNIT_ASSERT_EQUAL(3.0, fVal); pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testFuncGETPIVOTDATALeafAccess() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][3] = { { "Type", "Member", "Value" }, { "A", "Anna", "1" }, { "B", "Brittany", "2" }, { "A", "Cecilia", "3" }, { "B", "Donna", "4" }, }; ScAddress aPos(1,1,0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); ScDPObject* pDPObj = nullptr; // Dimension definition DPFieldDef aFields[] = { { "Type", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Member", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Value", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::SUM, false }, }; // Create pivot table at A1 on 2nd sheet. pDPObj = createDPFromRange(m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new pivot table object into document.", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); ScRange aOutRange = refresh(pDPObj); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][3] = { { "Type", "Member", "Sum - Value" }, { "A", "Anna", "1" }, { nullptr, "Cecilia", "3" }, { "B", "Brittany", "2" }, { nullptr, "Donna", "4" }, { "Total Result", nullptr, "10" }, }; bSuccess = checkDPTableOutput<3>(m_pDoc, aOutRange, aOutputCheck, "Pivot table refreshed"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } // Insert formulas with GETPIVOTDATA in column E, and check their results. struct Check { const char* mpFormula; double mfResult; }; Check aChecks[] = { { "=GETPIVOTDATA($A$1;\"Member[Anna]\")", 1.0 }, { "=GETPIVOTDATA($A$1;\"Member[Brittany]\")", 2.0 }, { "=GETPIVOTDATA($A$1;\"Member[Cecilia]\")", 3.0 }, { "=GETPIVOTDATA($A$1;\"Member[Donna]\")", 4.0 }, }; for (size_t i = 0; i < SAL_N_ELEMENTS(aChecks); ++i) m_pDoc->SetString(ScAddress(4,i,1), OUString::createFromAscii(aChecks[i].mpFormula)); m_pDoc->CalcAll(); for (size_t i = 0; i < SAL_N_ELEMENTS(aChecks); ++i) { FormulaError nErr = m_pDoc->GetErrCode(ScAddress(4,i,1)); CPPUNIT_ASSERT_EQUAL((sal_uInt16)FormulaError::NONE, (sal_uInt16)nErr); double fVal = m_pDoc->GetValue(ScAddress(4,i,1)); CPPUNIT_ASSERT_EQUAL(aChecks[i].mfResult, fVal); } pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableRepeatItemLabels() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Name", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, true }, { "Country", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Year", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Score", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][4] = { { "Andy", "US", "1999", "30" }, { "Andy", "US", "2002", "20" }, { "Andy", "US", "2010", "45" }, { "David", "GB", "1998", "12" }, { "Edward", "NO", "2000", "8" }, { "Frank", "FR", "2009", "15" }, { "Frank", "FR", "2008", "45" }, { "Frank", "FR", "2007", "45" }, }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); SCROW nRow1 = aSrcRange.aStart.Row(), nRow2 = aSrcRange.aEnd.Row(); SCCOL nCol1 = aSrcRange.aStart.Col(), nCol2 = aSrcRange.aEnd.Col(); ScDPObject* pDPObj = createDPFromRange( m_pDoc, ScRange(nCol1, nRow1, 0, nCol2, nRow2, 0), aFields, nFieldCount, false); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new datapilot object into document", bSuccess); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); pDPObj->SetName(pDPs->CreateNewName()); bool bOverflow = false; ScRange aOutRange = pDPObj->GetNewOutputRange(bOverflow); CPPUNIT_ASSERT_MESSAGE("Table overflow!?", !bOverflow); pDPObj->Output(aOutRange.aStart); aOutRange = pDPObj->GetOutRange(); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][4] = { { "Name", "Country", "Year", "Sum - Score" }, { "Andy", "US", "1999", "30" }, { "Andy", nullptr, "2002", "20" }, { "Andy", nullptr, "2010", "45" }, { "David", "GB", "1998", "12" }, { "Edward", "NO", "2000", "8" }, { "Frank", "FR", "2007", "45" }, { "Frank", nullptr, "2008", "45" }, { "Frank", nullptr, "2009", "15" }, { "Total Result", nullptr, nullptr, "220" } }; bSuccess = checkDPTableOutput<4>(m_pDoc, aOutRange, aOutputCheck, "DataPilot table output"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be only one data cache.", size_t(1), pDPs->GetSheetCaches().size()); pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("There should be no more tables.", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("There shouldn't be any more cache stored.", size_t(0), pDPs->GetSheetCaches().size()); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableDPCollection() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Dimension definition DPFieldDef aFields[] = { { "Software", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Version", sheet::DataPilotFieldOrientation_COLUMN, ScGeneralFunction::NONE, false }, { "1.2.3", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::NONE, false } }; // Raw data const char* aData[][3] = { { "LibreOffice", "3.3.0", "30" }, { "LibreOffice", "3.3.1", "20" }, { "LibreOffice", "3.4.0", "45" }, }; size_t nFieldCount = SAL_N_ELEMENTS(aFields); size_t const nDataCount = SAL_N_ELEMENTS(aData); ScRange aSrcRange = insertDPSourceData(m_pDoc, aFields, nFieldCount, aData, nDataCount); SCROW nRow1 = aSrcRange.aStart.Row(), nRow2 = aSrcRange.aEnd.Row(); SCCOL nCol1 = aSrcRange.aStart.Col(), nCol2 = aSrcRange.aEnd.Col(); ScRange aDataRange(nCol1, nRow1, 0, nCol2, nRow2, 0); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); // Check at the beginning CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be no DP table", size_t(0), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("should return nullptr", static_cast(nullptr), pDPs->GetByName("DP1")); CPPUNIT_ASSERT_EQUAL_MESSAGE("should return nullptr", static_cast(nullptr), pDPs->GetByName("")); // Add 2 DP objects ScDPObject* pDPObj = createDPFromRange(m_pDoc, aDataRange , aFields, nFieldCount, false); bool bSuccess = pDPs->InsertNewTable(pDPObj); CPPUNIT_ASSERT_MESSAGE("failed to insert a new DP object into document", bSuccess); pDPObj->SetName("DP1"); // set custom name CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one data pilot table.", size_t(1), pDPs->GetCount()); ScDPObject* pDPObj2 = createDPFromRange(m_pDoc, aDataRange, aFields, nFieldCount, false); bSuccess = pDPs->InsertNewTable(pDPObj2); CPPUNIT_ASSERT_MESSAGE("failed to insert a new DP object into document", bSuccess); pDPObj2->SetName("DP2"); // set custom name CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be two DP tables", size_t(2), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("should return first DPObject", pDPObj, pDPs->GetByName("DP1")); CPPUNIT_ASSERT_EQUAL_MESSAGE("should return second DPObject", pDPObj2, pDPs->GetByName("DP2")); CPPUNIT_ASSERT_EQUAL_MESSAGE("empty string should return nullptr", static_cast(nullptr), pDPs->GetByName("")); CPPUNIT_ASSERT_EQUAL_MESSAGE("non existent name should return nullptr", static_cast(nullptr), pDPs->GetByName("Non")); // Remove first DP Object pDPs->FreeTable(pDPObj); CPPUNIT_ASSERT_EQUAL_MESSAGE("there should be only one DP table", size_t(1), pDPs->GetCount()); CPPUNIT_ASSERT_EQUAL_MESSAGE("first DP object was deleted, should return nullptr", static_cast(nullptr), pDPs->GetByName("DP1")); CPPUNIT_ASSERT_EQUAL_MESSAGE("should return second DPObject", pDPObj2, pDPs->GetByName("DP2")); CPPUNIT_ASSERT_EQUAL_MESSAGE("empty string should return nullptr", static_cast(nullptr), pDPs->GetByName("")); CPPUNIT_ASSERT_EQUAL_MESSAGE("non existent name should return nullptr", static_cast(nullptr), pDPs->GetByName("Non")); // Remove second DP Object pDPs->FreeTable(pDPObj2); CPPUNIT_ASSERT_EQUAL_MESSAGE("first DP object was deleted, should return nullptr", static_cast(nullptr), pDPs->GetByName("DP1")); CPPUNIT_ASSERT_EQUAL_MESSAGE("second DP object was deleted, should return nullptr", static_cast(nullptr), pDPs->GetByName("DP2")); CPPUNIT_ASSERT_EQUAL_MESSAGE("empty string should return nullptr", static_cast(nullptr), pDPs->GetByName("")); CPPUNIT_ASSERT_EQUAL_MESSAGE("non existent name should return nullptr", static_cast(nullptr), pDPs->GetByName("Non")); // Clean-up m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } void Test::testPivotTableMedianFunc() { m_pDoc->InsertTab(0, "Data"); m_pDoc->InsertTab(1, "Table"); // Raw data const char* aData[][4] = { { "Condition", "Day1Hit", "Day1Miss", "Day1FalseAlarm" }, { "False Memory", "7", "3", "0" }, { "Control", "10", "0", "1" }, { "False Memory", "9", "1", "0" }, { "Control", "9", "1", "2" }, { "False Memory", "7", "3", "3" }, { "Control", "10", "0", "0" }, { "False Memory", "9", "1", "1" }, { "Control", "6", "4", "2" }, { "False Memory", "8", "2", "1" }, { "Control", "7", "3", "3" }, { "False Memory", "9", "1", "1" }, { "Control", "10", "0", "0" }, { "False Memory", "10", "0", "0" }, { "Control", "10", "0", "0" }, { "False Memory", "10", "0", "0" }, { "Control", "9", "1", "1" }, { "False Memory", "10", "0", "0" }, { "Control", "10", "0", "0" }, }; // Dimension definition DPFieldDef aFields[] = { { "Condition", sheet::DataPilotFieldOrientation_ROW, ScGeneralFunction::NONE, false }, { "Day1Hit", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::MEDIAN, false }, { "Day1Miss", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::MEDIAN, false }, { "Day1FalseAlarm", sheet::DataPilotFieldOrientation_DATA, ScGeneralFunction::MEDIAN, false }, }; ScAddress aPos(1, 1, 0); ScRange aDataRange = insertRangeData(m_pDoc, aPos, aData, SAL_N_ELEMENTS(aData)); CPPUNIT_ASSERT_EQUAL_MESSAGE("failed to insert range data at correct position", aPos, aDataRange.aStart); std::unique_ptr pDPObj(createDPFromRange( m_pDoc, aDataRange, aFields, SAL_N_ELEMENTS(aFields), false)); CPPUNIT_ASSERT_MESSAGE("Failed to create pivot table object.", pDPObj); // Create a new pivot table output. ScDBDocFunc aFunc(getDocShell()); bool bSuccess = aFunc.CreatePivotTable(*pDPObj, false, true); CPPUNIT_ASSERT_MESSAGE("Failed to create pivot table output via ScDBDocFunc.", bSuccess); ScDPCollection* pDPs = m_pDoc->GetDPCollection(); CPPUNIT_ASSERT_MESSAGE("Failed to get pivot table collection.", pDPs); ScDPObject* pDPObject = &(*pDPs)[0]; ScRange aOutRange = pDPObject->GetOutRange(); { // Expected output table content. 0 = empty cell const char* aOutputCheck[][4] = { { "Condition", "Data", nullptr }, { "Control", "Median - Day1Hit", "10" }, { nullptr, "Median - Day1Miss", "0" }, { nullptr, "Median - Day1FalseAlarm", "1", }, { "False Memory", "Median - Day1Hit", "9" }, { nullptr, "Median - Day1Miss", "1" }, { nullptr, "Median - Day1FalseAlarm", "0", "0" }, { "Total Median - Day1Hit", nullptr, "9", nullptr }, { "Total Median - Day1Miss", nullptr, "1", nullptr }, { "Total Median - Day1FalseAlarm", nullptr, "0.5", nullptr } }; bSuccess = checkDPTableOutput<4>(m_pDoc, aOutRange, aOutputCheck, "Pivot table created via ScDBDocFunc"); CPPUNIT_ASSERT_MESSAGE("Table output check failed", bSuccess); } bSuccess = aFunc.RemovePivotTable(*pDPObject, false, true); CPPUNIT_ASSERT_MESSAGE("Failed to remove pivot table object.", bSuccess); m_pDoc->DeleteTab(1); m_pDoc->DeleteTab(0); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */