/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include <iostream>
#include <stdio.h>

#include "registry/registry.h"
#include <rtl/ustring.hxx>
#include <rtl/alloc.h>

using namespace std;


#if (defined UNX)
int main()
#else
int _cdecl main()
#endif
{
    RegHandle       hReg;
    RegKeyHandle    hRootKey, hKey1, hKey2, hKey3, hKey4, hKey5;

    cout << "\n     Simple Registry Test !!!     \n\n";

    if (reg_createRegistry(OUString("test4.rdb").pData, &hReg))
        cout << "\t0. creating registry \"test4.rdb\" failed\n";
    else
        cout << "0. registry test4.rdb is created\n";

    if (reg_openRootKey(hReg, &hRootKey))
        cout << "1. open root key \"test4.rdb\" failed\n";
    else
        cout << "1. root key of \"test4.rdb\" is opened\n";

    if (reg_createKey(hRootKey, OUString("myFirstKey").pData, &hKey1))
        cout << "\t2. creating key \"myFirstKey\" failed\n";
    else
        cout << "2. key \"myFirstKey\" is created\n";
    if (reg_createKey(hRootKey, OUString("mySecondKey").pData, &hKey2))
        cout << "\t3. creating key \"mySecondKey\" failed\n";
    else
        cout << "3. key \"mySecondKey\" is created\n";
    if (reg_createKey(hKey1, OUString("myFirstSubKey").pData, &hKey3))
        cout << "\t4. creating subkey \"myFirstSubKey\" failed\n";
    else
        cout << "4. subkey \"myFirstSubKey\" is created\n";
    if (reg_createKey(hKey1, OUString("mySecondSubKey").pData, &hKey4))
        cout << "\t5. creating subkey \"mySecondSubKey\" failed\n";
    else
        cout << "5. subkey \"mySecondSubKey\" is created\n";
    if (reg_createKey(hRootKey, OUString("myThirdKey").pData, &hKey5))
        cout << "\t6. creating key \"myThirdKey\" is created\n\n";
    else
        cout << "6. key \"myThirdKey\" is created\n\n";


    RegKeyHandle*   phSubKeys;
    sal_uInt32      nSubKeys;
    if (reg_openSubKeys(hRootKey, OUString("myFirstKey").pData, &phSubKeys, &nSubKeys))
        cout << "\t7. open subkeys of \"myfirstKey\" failed\n";
    else
        cout << "7. open " << nSubKeys << "subkeys of \"myfirstKey\"\n";

    OUString keyName;
    if (reg_getKeyName(phSubKeys[0], &keyName.pData))
        cout << "\tname of subkey 1 = " << OUStringToOString(keyName, RTL_TEXTENCODING_ASCII_US).getStr() << "\n";
    if (reg_getKeyName(phSubKeys[1], &keyName.pData))
        cout << "\tname of subkey 2 = " << OUStringToOString(keyName, RTL_TEXTENCODING_ASCII_US).getStr() << "\n";

    if (reg_closeSubKeys(phSubKeys, nSubKeys))
        cout << "\t8. close subkeys of \"myfirstKey\" failed\n\n";
    else
        cout << "8. close " << nSubKeys << "subkeys of \"myfirstKey\"\n\n";


    char* Value=(char*)"Mein erster Value";
    if (reg_setValue(hRootKey, OUString("mySecondKey").pData, RG_VALUETYPE_STRING, Value, 18))
        cout << "\t9. setValue of key \"mySecondKey\" failed\n";
    else
        cout << "9. setValue (string Value)  of key \"mySecondKey\"\n";

    RegValueType    valueType;
    sal_uInt32      valueSize;
    sal_Char*       readValue;
    if (reg_getValueInfo(hRootKey, OUString("mySecondKey").pData, &valueType, &valueSize))
        cout << "\t10. getValueInfo of key \"mySecondKey\" failed\n";
    else
        cout << "10. getValueInfo of key \"mySecondKey\"\n";

    readValue = (sal_Char*)rtl_allocateMemory(valueSize);
    if (reg_getValue(hKey2, OUString().pData, readValue))
        cout << "\t11. getValue of key \"mySecondKey\" failed\n";
    else
    {
        cout << "11. getValue of key \"mySecondKey\"\n";

        cout << "read Value,\n\tvalueType = " << (long)valueType
              << "\n\tvalueSize = " << valueSize
             << "\n\tvalue = " << readValue << "\n\n";
    }
    rtl_freeMemory(readValue);

    if (reg_closeKey(hKey1) ||
        reg_closeKey(hKey3) ||
        reg_closeKey(hKey4))
        cout << "\t12. closing \"myFirstKey\" \"myfistSubKey\" \"mySecondSubKey\" failed\n";
    else
        cout << "12. keys \"myFirstKey\" \"myfistSubKey\" \"mySecondSubKey\" are closed\n";

    if (reg_deleteKey(hRootKey, OUString("myFirstKey").pData))
        cout << "13.\t delete key \"myFirstKey\" failed\n";
    else
        cout << "13. key \"myFirstKey\" is deleted\n";

    if (reg_closeKey(hKey2))
        cout << "\t14. closing key \"mySecondKey\" failed\n";
    else
        cout << "14. key \"mySecondKey\" is closed\n";

    if (reg_openKey(hRootKey, OUString("mySecondKey").pData, &hKey2))
        cout << "\n15. open key \"mySecondKey\" failed\n";
    else
        cout << "15. key \"mySecondKey\" is opended\n";

    if (reg_closeKey(hKey5))
        cout << "\t15. closing key \"myThirdSubKey\" failed\n";
    else
        cout << "15. key \"myThirdSubKey\" is closed\n";
    if (reg_deleteKey(hRootKey, OUString("myThirdKey").pData))
        cout << "\t16. delete key \"myThirdKey\" failed\n";
    else
        cout << "16. key \"myThirdKey\" is deleted\n";

    if (reg_openKey(hRootKey, OUString("myThirdKey").pData, &hKey5))
        cout << "\t17. open key \"myThirdKey\" failed\n";
    else
        cout << "17. key \"myThirdKey\" is opened\n";

    cout << "\n close open keys\n\n";

    if (reg_closeKey(hKey2))
        cout << "\t18. closing key \"mySecondKey\" failed\n";
    else
        cout << "18. key \"mySecondKey\" is closed\n";

    if (reg_closeKey(hRootKey))
        cout << "\t19. closing root key failed\n";
    else
        cout << "19. root key is closed\n";

    if (reg_closeRegistry(hReg))
        cout << "\t20. closing registry \"test4.rdb\" failed\n";
    else
        cout << "20. registry \"test4.rdb\" is closed\n";

    // Test loadkey
    cout << "\nTest load key\n\n";

    RegHandle       hReg2;
    RegKeyHandle    hRootKey2, h2Key1, h2Key2, h2Key3, h2Key4, h2Key5;

    if (reg_createRegistry(OUString("test5.rdb").pData, &hReg2))
        cout << "\t21. creating registry \"test5.rdb\" failed\n";
    else
        cout << "21. registry \"test5.rdb\" is created\n";

    if (reg_openRootKey(hReg2, &hRootKey2))
        cout << "\t22. open root key of \"test5.rdb\" failed\n";
    else
        cout << "22. root key of \"test5.rdb\" is opened\n";

    if (reg_createKey(hRootKey2, OUString("reg2FirstKey").pData, &h2Key1))
        cout << "\t23. creating key \"reg2FirstKey\" failed\n";
    else
        cout << "23. key \"reg2FirstKey\" is created\n";
    if (reg_createKey(hRootKey2, OUString("reg2SecondKey").pData, &h2Key2))
        cout << "\t24. creating key \"reg2SecondKey\" failed\n";
    else
        cout << "24. key \"reg2SecondKey\" is created\n";
    if (reg_createKey(h2Key1, OUString("reg2FirstSubKey").pData, &h2Key3))
        cout << "\t25. creating key \"reg2FirstSubKey\" failed\n";
    else
        cout << "25. key \"reg2FirstSubKey\" is created\n";
    if (reg_createKey(h2Key1, OUString("reg2SecondSubKey").pData, &h2Key4))
        cout << "\26. creating key \"reg2SecondSubKey\" failed\n";
    else
        cout << "26. key \"reg2SecondSubKey\" is created\n";
    if (reg_createKey(hRootKey2, OUString("reg2ThirdKey").pData, &h2Key5))
        cout << "\n27. creating key \"reg2ThirdKey\" failed\n";
    else
        cout << "27. key \"reg2ThirdKey\" is created\n";

    sal_uInt32 nValue= 123456789;
    if (reg_setValue(h2Key3, OUString().pData, RG_VALUETYPE_LONG, &nValue, sizeof(sal_uInt32)))
        cout << "\t27.b) setValue of key \"reg2FirstSubKey\" failed\n";
    else
        cout << "27.b). setValue (long Value)  of key \"reg2FirstSubKey\"\n";

    if (reg_closeKey(h2Key1) ||
        reg_closeKey(h2Key2) ||
        reg_closeKey(h2Key3) ||
        reg_closeKey(h2Key4) ||
        reg_closeKey(h2Key5))
        cout << "\n\t28. closing keys of \"test5.rdb\" failed\n";
    else
        cout << "\n28. all keys of \"test5.rdb\" closed\n";

    if (reg_closeKey(hRootKey2))
        cout << "\t29. root key of \"test5.rdb\" failed\n";
    else
        cout << "29. root key of \"test5.rdb\" is closed\n";

    if (reg_closeRegistry(hReg2))
        cout << "\t30. registry test5.rdb is closed\n";
    else
        cout << "30. registry test5.rdb is closed\n";

    if (reg_openRegistry(OUString("test4.rdb").pData, &hReg, REG_READWRITE))
        cout << "\t31. registry test4.rdb is opened\n";
    else
        cout << "31. registry test4.rdb is opened\n";

    if (reg_openRootKey(hReg, &hRootKey))
        cout << "\t32. open root key of \"test4.rdb\" is failed\n";
    else
        cout << "32. root key of \"test4.rdb\" is opened\n";

    if (reg_loadKey(hRootKey, OUString("allFromTest2").pData,
                    OUString("test5.rdb").pData))
        cout << "\n\t33. load all keys from \"test5.rdb\" under key \"allFromTest2\" failed\n";
    else
        cout << "\n33. load all keys from test5.rdb under key \"allFromTest2\"\n";

    if (reg_saveKey(hRootKey, OUString("allFromTest2").pData,
                    OUString("test6.rdb").pData))
        cout << "\n\t34. save all keys under \"allFromTest2\" in test6.rdb\n";
    else
        cout << "\n34. save all keys under \"allFromTest2\" in test6.rdb\n";


    if (reg_createKey(hRootKey, OUString("allFromTest3").pData, &hKey1))
        cout << "\t35. creating key \"allFromTest3\" failed\n";
    else
        cout << "36. key \"allFromTest3\" is created\n";
    if (reg_createKey(hKey1, OUString("myFirstKey2").pData, &hKey2))
        cout << "\t37. creating key \"myFirstKey2\" failed\n";
    else
        cout << "37. key \"myFirstKey2\" is created\n";
    if (reg_createKey(hKey1, OUString("mySecondKey2").pData, &hKey3))
        cout << "\t38. creating key \"mySecondKey2\" failed\n";
    else
        cout << "38. key \"mySecondKey2\" is created\n";

    if (reg_mergeKey(hRootKey, OUString("allFromTest3").pData,
                    OUString("test6.rdb").pData, sal_False, sal_False))
        cout << "\n\t39. merge all keys under \"allFromTest2\" with all in test6.rdb\n";
    else
        cout << "\n39. merge all keys under \"allFromTest2\" with all in test6.rdb\n";

    if (reg_closeKey(hKey1))
        cout << "\n\t40. closing key \"allFromTest3\" of \"test5.rdb\" failed\n";
    else
        cout << "\n40. closing key \"allFromTest3\" of \"test5.rdb\"\n";
    if (reg_closeKey(hKey2))
        cout << "\n\t41. closing key \"myFirstKey2\" of \"test5.rdb\" failed\n";
    else
        cout << "\n41. closing key \"myFirstKey2\" of \"test5.rdb\"\n";
    if (reg_closeKey(hKey3))
        cout << "\n\t42. closing key \"mySecondKey2\" of \"test5.rdb\" failed\n";
    else
        cout << "\n42. closing key \"mySecondKey2\" of \"test5.rdb\"\n";


    if (reg_deleteKey(hRootKey, OUString("/allFromTest3/reg2FirstKey/reg2FirstSubKey").pData))
        cout << "\n\t43. delete key \"/allFromTest3/reg2FirstKey/reg2FirstSubKey\" failed\n";
    else
        cout << "\n43. key \"/allFromTest3/reg2FirstKey/reg2FirstSubKey\" is deleted\n";

    if (reg_openRegistry(OUString("test4.rdb").pData, &hReg2, REG_READONLY))
        cout << "\n\t44. registry test4.rdb is opened for read only\n";
    else
        cout << "\n44. registry test4.rdb is opened for read only\n";

    RegHandle hReg3;
    if (reg_openRegistry(OUString("test4.rdb").pData, &hReg3, REG_READONLY))
        cout << "\n\t44.a). registry test4.rdb is opened for read only\n";
    else
        cout << "\n44.a). registry test4.rdb is opened for read only\n";

    if (reg_closeRegistry(hReg2))
        cout << "\t45. closing registry \"test4.rdb\" failed\n";
    else
        cout << "45. registry \"test4.rdb\" is closed\n";

    if (reg_closeKey(hRootKey))
        cout << "\n\t46. closing root key of \"test4.rdb\" failed\n";
    else
        cout << "\n46. root key of \"test4.rdb\" is closed\n";

    if (reg_closeRegistry(hReg))
        cout << "\t47. closing registry \"test4.rdb\" failed\n";
    else
        cout << "47. registry \"test4.rdb\" is closed\n";

    if (reg_closeRegistry(hReg3))
        cout << "\t47.a). closing registry \"test4.rdb\" failed\n";
    else
        cout << "47.a). registry \"test4.rdb\" is closed\n";

    return(0);
}


/* vim:set shiftwidth=4 softtabstop=4 expandtab: */