*PPD-Adobe: "4.1" *% Adobe PostScript(R) Printer Description File *% For Lexmark 4039 LaserPrinter plus *% Produced by Lexmark International, Inc. *% *% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the content *% of the file is not altered in any way from its original form. *% *% *% WARNING: If you want to edit this PPD file and use it with Aldus *% PageMaker, be sure to use an editor (such as DOS Edit) *% that does NOT add an end-of-file marker (hex 1A) when *% it stores the file. *% *% *FormatVersion: "4.1" *FileVersion: "1.1" *LanguageVersion: English *PCFileName: "LEX4039P.PPD" *Product: "(Lexmark 4039 LaserPrinter plus)" *PSVersion: "" *ModelName: "Lexmark 4039 LaserPrinter plus" *ShortNickName: "Lexmark 4039 plus PS" *NickName: "Lexmark 4039 plus PS" *% === Options and Constraints ============ *OpenGroup: InstallableOptions/Options Installed *OpenUI *Option1/Duplex - Option: Boolean *DefaultOption1: False *Option1 True/Installed: "" *Option1 False/Not Installed: "" *CloseUI: *Option1 *OpenUI *Option2/Lower Tray - Option: Boolean *DefaultOption2: False *Option2 True/Installed: "" *Option2 False/Not Installed: "" *CloseUI: *Option2 *OpenUI *Option3/Envelope Feeder - Option: Boolean *DefaultOption3: False *Option3 True/Installed: "" *Option3 False/Not Installed: "" *CloseUI: *Option3 *OpenUI *Option4/Flash Memory Card - Option: Boolean *DefaultOption4: False *Option4 True/Installed: "" *Option4 False/Not Installed: "" *CloseUI: *Option4 *OpenUI *Option5/Printer Hard Disk - Option: Boolean *DefaultOption5: False *Option5 False/Not Installed: "" *Option5 True/Installed: "" *CloseUI: *Option5 *OpenUI *Option6/Printer Memory - Option: PickOne *DefaultOption6: 2Meg *Option6 2Meg/2 MB Printer Memory: "" *Option6 4Meg/4 MB Printer Memory: "" *Option6 6Meg/6 MB Printer Memory: "" *Option6 8Meg/8 MB Printer Memory: "" *Option6 10Meg/10 MB Printer Memory: "" *Option6 12Meg/12 MB Printer Memory: "" *Option6 16Meg/16 MB Printer Memory: "" *CloseUI: *Option6 *CloseGroup: InstallableOptions *UIConstraints: *Option1 False *Duplex *UIConstraints: *Option2 False *InputSlot Lower *UIConstraints: *Option2 False *TraySwitch True *UIConstraints: *Option3 False *InputSlot Envelope *% === Basic Capabilities ============ *ColorDevice: False *LanguageLevel: "2" *Protocols: PJL *FreeVM: "376000" *ColorDevice: False *DefaultColorSpace: Gray *Throughput: "8" *Password: "0" *ExitServer: " count 0 eq % is the password on the stack? { true } { dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq % is the password on the stack? { true } { dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *% === Job Control Language == *JCLBegin: "<1B>%-12345X@PJL JOB<0A>" *JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>" *JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X" *% === Resolution ============ *OpenUI *Resolution/Resolution: PickOne *DefaultResolution: 300dpi *OrderDependency: 10 AnySetup *Resolution *Resolution 300dpi/300 dpi: "1 dict dup /HWResolution [300 300] put setpagedevice" *Resolution 600dpi/600 dpi: "1 dict dup /HWResolution [600 600] put setpagedevice" *?Resolution: " save currentpagedevice /HWResolution get 0 get ( ) cvs print (dpi) = flush restore " *End *CloseUI: *Resolution *OpenUI *Smoothing/Smoothing: PickOne *DefaultSmoothing: False *OrderDependency: 40 AnySetup *Smoothing *Smoothing True/On: " 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 2 put put setpagedevice" *End *Smoothing False/Off: " 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 0 put put setpagedevice" *End *?Smoothing: " save currentpagedevice /PostRenderingEnhanceDetails get /REValue get dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush restore " *End *CloseUI: *Smoothing *% === Halftone Information =============== *ScreenFreq: "60.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Factory *Transfer Factory: " { statusdict begin doenhancedhalftone resolution end 600 eq and { dup 0.28 lt { 0.6 exp 1.2 mul } { dup mul .478426 mul .521574 add } ifelse } { 0.85 exp } ifelse }" *End *Transfer Factory.Inverse: " { statusdict begin doenhancedhalftone resolution end 600 eq and { dup 0.28 lt { 0.6 exp 1.2 mul } { dup mul .478426 mul .521574 add } ifelse } { 0.85 exp } ifelse 1 exch sub }" *End *% === Paper Handling =================== *LandscapeOrientation: Plus90 *% These entries will set up the frame buffer. *% Usually used with AutoSelect input slot. *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for *% Other Envelope because C9, B5, and Other Envelope are not defined in *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and *% dimensions are given. Translation strings give correct names. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter/Letter: " 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" *End *PageSize Legal/Legal: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *PageSize Executive/Executive: " 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice" *End *PageSize A4/A4: " 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" *End *PageSize A5/A5: " 2 dict dup /PageSize [419 595] put dup /ImagingBBox null put setpagedevice" *End *PageSize B5/B5: " 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" *End *PageSize Monarch/Monarch Envelope: " 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice" *End *PageSize C4/C9 Envelope: " 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice" *End *PageSize Comm10/C10 Envelope: " 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice" *End *PageSize DL/DL Envelope: " 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice" *End *PageSize C5/C5 Envelope: " 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice" *End *PageSize ISOB5/B5 Envelope: " 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice" *End *PageSize C3/Other Envelope: " 2 dict dup /PageSize [612 996] put dup /ImagingBBox null put setpagedevice" *End *?PageSize: " save 13 dict dup /letter (Letter) put dup /legal (Legal) put dup /executivepage (Executive) put dup /a4 (A4) put dup /a5 (A5) put dup /b5 (B5) put dup /3.875x7.5envelope (Monarch) put dup /3.875x8.875envelope (C9) put dup /4.125x9.5envelope (Comm10) put dup /110x220envelope (DL) put dup /162x229envelope (C5) put dup /176x250envelope (Envelope.499.709) put dup /otherenvelope (Envelope.612.996) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. *% Usually used with input slots other than AutoSelect. *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for *% Other Envelope because C9, B5, and Other Envelope are not defined in *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and *% dimensions are given. Translation strings give correct names. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter/Letter: " 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Legal/Legal: " 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Executive/Executive: " 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice" *End *PageRegion A4/A4: " 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice" *End *PageRegion A5/A5: " 2 dict dup /PageSize [419 595] put dup /ImagingBBox null put setpagedevice" *End *PageRegion B5/B5: " 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Monarch/Monarch Envelope: " 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice" *End *PageRegion C4/C9 Envelope: " 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice" *End *PageRegion Comm10/C10 Envelope: " 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice" *End *PageRegion DL/DL Envelope: " 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice" *End *PageRegion C5/C5 Envelope: " 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice" *End *PageRegion ISOB5/B5 Envelope: " 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice" *End *PageRegion C3/Other Envelope: " 2 dict dup /PageSize [612 996] put dup /ImagingBBox null put setpagedevice" *End *CloseUI: *PageRegion *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for *% Other Envelope because C9, B5, and Other Envelope are not defined in *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and *% dimensions are given. Translation strings give correct names. *DefaultImageableArea: Letter *ImageableArea Letter: "18 17 597 776" *ImageableArea Legal: "18 18 597 992" *ImageableArea Executive: "18 18 505 740" *ImageableArea A4: "10 19 588 827" *ImageableArea A5: "18 13 405 580" *ImageableArea B5: "18 18 505 711" *ImageableArea Monarch/Monarch Envelope: "18 13 260 526" *ImageableArea C4/C9 Envelope: "18 14 260 623" *ImageableArea Comm10/C10 Envelope: "18 15 278 668" *ImageableArea DL/DL Envelope: "18 14 293 608" *ImageableArea C5/C5 Envelope: "18 13 440 634" *ImageableArea ISOB5/B5 Envelope: "18 13 480 693" *ImageableArea C3/Other Envelope: "18 18 593 992" *?ImageableArea: " save /cvp { cvi ( ) cvs print ( ) print } bind def newpath clippath pathbbox 4 -2 roll exch 2 {ceiling cvp} repeat exch 2 {floor cvp} repeat flush restore " *End *% These provide the physical dimensions of the paper (by keyword) *% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for *% Other Envelope because C9, B5, and Other Envelope are not defined in *% Adobe PPD specifications. Correct sizes, regions, imageable areas, and *% dimensions are given. Translation strings give correct names. *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension Executive: "522 756" *PaperDimension A4: "595 842" *PaperDimension A5: "420 595" *PaperDimension B5: "516 729" *PaperDimension Monarch/Monarch Envelope: "279 540" *PaperDimension C4/C9 Envelope: "279 639" *PaperDimension Comm10/C10 Envelope: "297 684" *PaperDimension DL/DL Envelope: "312 624" *PaperDimension C5/C5 Envelope: "459 649" *PaperDimension ISOB5/B5 Envelope: "499 709" *PaperDimension C3/Other Envelope: "612 996" *RequiresPageRegion All: True *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: AutoSelect *InputSlot AutoSelect/Auto Select: " 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" *End *InputSlot Upper/Upper Tray: " currentpagedevice /InputAttributes get 0 get setpagedevice 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" *End *InputSlot Lower/Lower Tray: " userdict /lms statusdict /optionalfeeder get exec { 1 }{ 0 }ifelse put currentpagedevice /InputAttributes get lms get setpagedevice 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice" *End *InputSlot Envelope/Envelope Feeder: " statusdict /envelopefeeder get exec { 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice 1 dict dup/InputAttributes 1 dict dup /Priority[2] put put setpagedevice } { 1 dict dup /ManualFeed true put setpagedevice }ifelse" *End *InputSlot EnvelopeManual/Manual Envelope: " 1 dict dup /ManualFeed true put setpagedevice 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice" *End *?InputSlot: " save [ (Upper) (Lower) (Envelope) (Manual) (ManualEnvelope) ] statusdict /papertray get exec {get exec} stopped { pop pop (Unknown) } if = flush restore " *End *CloseUI: *InputSlot *OpenUI *ManualFeed/Manual Paper: Boolean *OrderDependency: 15 AnySetup *ManualFeed *DefaultManualFeed: False *ManualFeed True/On: "1 dict dup /ManualFeed true put setpagedevice" *ManualFeed False/Off: "1 dict dup /ManualFeed false put setpagedevice" *?ManualFeed: " save currentpagedevice /ManualFeed get {(True)}{(False)}ifelse = flush restore " *End *CloseUI: *ManualFeed *OpenUI *TraySwitch/Tray Linking: PickOne *OrderDependency: 50 AnySetup *TraySwitch *DefaultTraySwitch: False *TraySwitch True/On: "1 dict dup /TraySwitch true put setpagedevice" *TraySwitch False/Off: "1 dict dup /TraySwitch false put setpagedevice" *?TraySwitch: " save currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush restore " *End *CloseUI: *TraySwitch *DefaultOutputOrder: Normal *OutputOrder Normal: "" *OutputOrder Reverse: "" *OpenUI *Duplex/Duplex: PickOne *DefaultDuplex: None *Duplex None/Simplex: "1 dict dup /Duplex false put setpagedevice" *Duplex DuplexNoTumble/Duplex - Long Edge: " statusdict /duplexer get exec { 2 dict dup /Duplex true put dup /Tumble false put setpagedevice } { 1 dict dup /Duplex false put setpagedevice } ifelse " *End *Duplex DuplexTumble/Duplex - Short Edge: " statusdict /duplexer get exec { 2 dict dup /Duplex true put dup /Tumble true put setpagedevice } { 1 dict dup /Duplex false put setpagedevice } ifelse " *End *?Duplex: " save currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush restore " *End *CloseUI: *Duplex *% === Font Information ========================================== *DefaultFont: Courier *Font Courier: Standard "(001.000)" Standard ROM *Font Courier-Bold: Standard "(001.000)" Standard ROM *Font Courier-Oblique: Standard "(001.000)" Standard ROM *Font Courier-BoldOblique: Standard "(001.000)" Standard ROM *Font Times-Roman: Standard "(001.000)" Standard ROM *Font Times-Bold: Standard "(001.000)" Standard ROM *Font Times-Italic: Standard "(001.000)" Standard ROM *Font Times-BoldItalic: Standard "(001.000)" Standard ROM *Font Helvetica: Standard "(001.000)" Standard ROM *Font Helvetica-Bold: Standard "(001.000)" Standard ROM *Font Helvetica-Oblique: Standard "(001.000)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM *Font Symbol: Special "(001.000)" Standard ROM *Font AvantGarde-Book: Standard "(001.000)" Standard ROM *Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM *Font AvantGarde-Demi: Standard "(001.000)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM *Font Bookman-Demi: Standard "(001.000)" Standard ROM *Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM *Font Bookman-Light: Standard "(001.000)" Standard ROM *Font Bookman-LightItalic: Standard "(001.000)" Standard ROM *Font Helvetica-Light: Standard "(001.000)" Standard ROM *Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM *Font Helvetica-Black: Standard "(001.000)" Standard ROM *Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM *Font Palatino-Roman: Standard "(001.000)" Standard ROM *Font Palatino-Bold: Standard "(001.000)" Standard ROM *Font Palatino-Italic: Standard "(001.000)" Standard ROM *Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM *Font ZapfDingbats: Special "(001.000)" Special ROM *?FontQuery: " save 4 dict begin /sv exch def /str (fonts/ ) def /st2 128 string def { count 0 gt { dup st2 cvs (/) print print (:) print dup FontDirectory exch known {pop (Yes)} { str exch st2 cvs dup length /len exch def 6 exch putinterval str 0 len 6 add getinterval mark exch { } st2 filenameforall counttomark 0 gt { cleartomark (Yes)}{cleartomark (No)}ifelse }ifelse = flush }{ exit } ifelse } bind loop (*) = flush sv end restore " *End *?FontList: " save 2 dict begin /sv exch def /str 128 string def FontDirectory { pop == } bind forall flush /filenameforall where { pop save (fonts/*) { dup length 6 sub 6 exch getinterval cvn == } bind str filenameforall flush restore } if (*) = flush sv end restore " *End *% Printer Messages (verbatim from printer): *Message: "%% exitserver: permanent state may be changed %%" *Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%" *Message: "\FontName\ not found, using Courier" *% Status (format: %% status: %% ) *Status: "Printer Busy" *Status: "Warming Up" *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "initializing" *Status: "not ready" *% Input Sources (format: %% status: ; source: %% ) *Source: "Serial" *Source: "Parallel" *Source: "Network" *% Printer Error (format: %% PrinterError: %%) *PrinterError: "Paper Jam" *PrinterError: "Wrong Paper Length" *PrinterError: "Invalid Manual Insertion" *PrinterError: "Change Size in Feeder" *PrinterError: "Change Size in Tray 1" *PrinterError: "Change Size in Tray 2" *PrinterError: "Paper Out or Feed Failure - Feed" *PrinterError: "Load Manual Envelope" *PrinterError: "Paper Out or Feed Failure - Tray 1" *PrinterError: "Paper Out or Feed Failure - Tray 2" *PrinterError: "Load Manual Paper" *PrinterError: "Output Bin Full" *PrinterError: "Cover Open/Cartridge Not Installed" *PrinterError: "Insufficient Memory" *PrinterError: "Complex Page" *PrinterError: "Default Storage Error" *PrinterError: "Defective Font Card Installed" *PrinterError: "Flash Full" *PrinterError: "ioerror" *PrinterError: "Flash Error" *PrinterError: "Duplex Not Attached" *PrinterError: "Duplex Cover Open" *PrinterError: "Scheduled Maintenance" *PrinterError: "Toner Low" *PrinterError: "Service Error" *%DeviceAdjustMatrix: " 1 0 0 1 0 0 " *% === Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) ===================== *ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0" *ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" *ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" *ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" *ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" *ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0" *ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: " {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *% For 71 lpi / 600 dpi =============================== *ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0" *ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" *ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" *ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" *ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" *ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667" *% End of PPD file for Lexmark 4039 LaserPrinter plus