*PPD-Adobe: "4.1" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1994 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *FormatVersion: "4.1" *FileVersion: "3.4" *PCFileName: "HP_3P522.PPD" *LanguageVersion: English *Product: "(HP LaserJet IIIP)" *PSVersion: "(52.2) 0" *ModelName: "HP LaserJet IIIP PostScript Cartridge" *ShortNickName: "HP LaserJetIIIP Cartridge v52.2" *NickName: "HP LaserJet IIIP PostScript Cartridge v52.2" *% ==== Options and Constraints ===== *OpenGroup: InstallableOptions/Options Installed *OpenUI *Option1/Optional Lower Tray: Boolean *DefaultOption1: False *Option1 True/Installed: "" *Option1 False/Not Installed: "" *CloseUI: *Option1 *CloseGroup: InstallableOptions *UIConstraints: *Option1 False *InputSlot Lower *UIConstraints: *ManualFeed False *PageSize B5 *UIConstraints: *PageSize B5 *ManualFeed False *UIConstraints: *ManualFeed False *PageRegion B5 *UIConstraints: *PageRegion B5 *ManualFeed False *% General Information and Defaults =============== *FreeVM: "264000" *LanguageLevel: "1" *ColorDevice: False *DefaultColorSpace: Gray *VariablePaperSize: False *FileSystem: False *Throughput: "4" *Password: "0" *ExitServer: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *DefaultResolution: 300dpi *?Resolution: " save initgraphics 0 0 moveto currentpoint matrix defaultmatrix transform 0 72 lineto currentpoint matrix defaultmatrix transform 3 -1 roll sub dup mul 3 1 roll exch sub dup mul add sqrt round cvi ( ) cvs print (dpi) = flush restore " *End *OpenUI *Smoothing/RET: PickOne *OrderDependency: 50 AnySetup *Smoothing *DefaultSmoothing: Medium *Smoothing None/Off: "0 statusdict /setdoret get exec" *Smoothing Light: "1 statusdict /setdoret get exec" *Smoothing Medium: "2 statusdict /setdoret get exec" *Smoothing Dark: "3 statusdict /setdoret get exec" *?Smoothing: " save [(None)(Light)(Medium)(Dark)(Unknown)] statusdict /doret get exec dup 3 gt{pop 4}if get = flush restore " *End *CloseUI: *Smoothing *% Halftone Information =============== *ScreenFreq: "60.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Null *Transfer Null: "{ }" *Transfer Null.Inverse: "{ 1 exch sub }" *% Paper Handling =================== *% Use these entries to set paper size most of the time, unless there is *% specific reason to use PageRegion. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter: "statusdict /lettertray get exec" *PageSize Legal: "statusdict /legaltray get exec" *PageSize Executive: "statusdict /executivetray get exec" *PageSize A4: "statusdict /a4tray get exec" *PageSize B5: "statusdict /b5tray get exec" *PageSize Comm10/Comm #10 Envelope: "statusdict /com10envelopetray get exec" *PageSize Monarch/Monarch Envelope: "statusdict /monarcenvelopetray get exec" *PageSize DL/DL Envelope: "statusdict /dlenvelopetray get exec" *PageSize C5/C5 Envelope: "statusdict /c5envelopetray get exec" *?PageSize: " save 9 dict dup /lettertray (Letter) put dup /legaltray (Legal) put dup /executivetray (Executive) put dup /a4tray (A4) put dup /b5tray (B5) put dup /com10envelopetray (Comm10) put dup /monarcenvelopetray (Monarch) put dup /dlenvelopetray (DL) put dup /c5envelopetray (C5) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. Usually used with manual feed. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: "letter" *PageRegion Legal: "legal" *PageRegion Executive: "executivepage" *PageRegion A4: "a4" *PageRegion B5: "b5" *PageRegion Comm10/Comm #10 Envelope: "com10envelope" *PageRegion Monarch/Monarch Envelope: "monarcenvelope" *PageRegion DL/DL Envelope: "dlenvelope" *PageRegion C5/C5 Envelope: "c5envelope" *CloseUI: *PageRegion *% The following entries provide information about specific paper keywords. *DefaultImageableArea: Letter *ImageableArea Letter: "18 19 593 774 " *ImageableArea Legal: "18 19 593 990 " *ImageableArea Executive: "18 19 501 738 " *ImageableArea A4: "18 19 578 824 " *ImageableArea B5: "18 19 505 713 " *ImageableArea Comm10/Comm #10 Envelope: "18 19 278 666 " *ImageableArea Monarch/Monarch Envelope: "18 19 259 522 " *ImageableArea DL/DL Envelope: "18 19 294 605 " *ImageableArea C5/C5 Envelope: "18 19 440 630 " *?ImageableArea: " save /cvp {( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore " *End *% These provide the physical dimensions of the paper (by keyword) *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension Executive: "522 756" *PaperDimension A4: "595 842" *PaperDimension B5: "516 729" *PaperDimension Comm10/Comm #10 Envelope: "297 684" *PaperDimension Monarch/Monarch Envelope: "279 540" *PaperDimension DL/DL Envelope: "312 624" *PaperDimension C5/C5 Envelope: "459 649" *LandscapeOrientation: Plus90 *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: Unknown *InputSlot Upper/Upper Tray: "0 statusdict /setpapertray get exec" *InputSlot Lower/Lower Tray: "1 statusdict /setpapertray get exec" *?InputSlot: " save [ (Upper) (Lower) ] statusdict /papertray get exec {get exec} stopped { pop pop (Unknown)} if = flush restore " *End *CloseUI: *InputSlot *OpenUI *ManualFeed: Boolean *OrderDependency: 20 AnySetup *ManualFeed *DefaultManualFeed: False *ManualFeed True: "statusdict /manualfeed true put" *ManualFeed False: "statusdict /manualfeed false put" *?ManualFeed: " save statusdict /manualfeed get {(True)}{(False)}ifelse = flush restore " *End *CloseUI: *ManualFeed *DefaultOutputOrder: Normal *% Font Information ===================== *DefaultFont: Courier *Font AvantGarde-Book: Standard "(001.002)" Standard ROM *Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM *Font AvantGarde-Demi: Standard "(001.003)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM *Font Bookman-Demi: Standard "(001.001)" Standard ROM *Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM *Font Bookman-Light: Standard "(001.001)" Standard ROM *Font Bookman-LightItalic: Standard "(001.001)" Standard ROM *Font Courier: Standard "(002.002)" Standard ROM *Font Courier-Bold: Standard "(002.002)" Standard ROM *Font Courier-BoldOblique: Standard "(002.002)" Standard ROM *Font Courier-Oblique: Standard "(002.002)" Standard ROM *Font Helvetica: Standard "(001.002)" Standard ROM *Font Helvetica-Bold: Standard "(001.002)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM *Font Helvetica-Oblique: Standard "(001.002)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.006)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(001.004)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(001.003)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(001.004)" Standard ROM *Font Palatino-Bold: Standard "(001.002)" Standard ROM *Font Palatino-BoldItalic: Standard "(001.002)" Standard ROM *Font Palatino-Italic: Standard "(001.002)" Standard ROM *Font Palatino-Roman: Standard "(001.001)" Standard ROM *Font Symbol: Special "(001.003)" Special ROM *Font Times-Bold: Standard "(001.002)" Standard ROM *Font Times-BoldItalic: Standard "(001.004)" Standard ROM *Font Times-Italic: Standard "(001.002)" Standard ROM *Font Times-Roman: Standard "(001.002)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.003)" Standard ROM *Font ZapfDingbats: Special "(001.002)" Special ROM *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print print (:) print FontDirectory exch known {(Yes)}{(No)} ifelse = } {exit} ifelse }bind loop (*) = flush restore " *End *?FontList: " save FontDirectory { pop == } bind forall flush (*) = flush restore " *End *% Printer Messages (verbatim from printer): *Message: "%%[ exitserver: permanent state may be changed ]%%" *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" *Message: "\FontName\ not found, using Courier" *% Status (format: %%[ status: ]%% ) *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "printing" *Status: "PrinterError: Out Of Paper" *Status: "PrinterError: Cover Open" *Status: "PrinterError: Feed Manual" *Status: "PrinterError: Paper Jam" *Status: "PrinterError: Miscellaneous Error" *Status: "PrinterError: Fatal Error" *% Input Sources (format: %%[ status: ; source: ]%% ) *Source: "serial9" *Source: "serial25" *Source: "AppleTalk" *Source: "Centronics" *% Printer Error (format: %%[ PrinterError: ]%%) *PrinterError: "Out Of Paper" *PrinterError: "Cover Open" *PrinterError: "Feed Manual" *PrinterError: "Paper Jam" *PrinterError: "Miscellaneous Error" *PrinterError: "Fatal Error" *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% For "HP LaserJet IIIP" version 52.2 *% Produced by "BuildPPD.ps" version 3.0 edit 58 *% Converted to meet 4.0 specification *% Last Edit Date: Jun 16 1994 *% The byte count of this file should be exactly 012998 or 013380 *% depending on the filesystem it resides in. *% end of PPD file for HP LaserJet IIIP