/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include "padialog.hrc"

ModalDialog RID_PADIALOG
{
    HelpID = "padmin:ModalDialog:RID_PADIALOG";
    OutputSize = TRUE ;
    SVLook = TRUE ;
    Size = MAP_APPFONT ( 260 , 198 ) ;
    Moveable = TRUE ;
    Closeable = TRUE ;

    FixedLine RID_PA_FL_CUPSUSAGE
    {
        Pos = MAP_APPFONT( 6, 145 );
        Size = MAP_APPFONT( 248, 8 );
        Text [ en-US ] = "CUPS support";
    };
    CheckBox RID_PA_CB_CUPSUSAGE
    {
        HelpID = "padmin:CheckBox:RID_PADIALOG:RID_PA_CB_CUPSUSAGE";
        Pos = MAP_APPFONT( 12, 158 );
        Size = MAP_APPFONT( 168, 8 );
        Text [ en-US ] = "Disable CUPS Support";
    };

    FixedLine RID_PA_FL_SEPBUTTON
    {
        Pos = MAP_APPFONT( 0, 176 );
        Size = MAP_APPFONT( 260, 2 );
    };
    CancelButton RID_PA_BTN_CANCEL
    {
        DefButton = TRUE;
        Pos = MAP_APPFONT( 190, 181 );
        Size = MAP_APPFONT( 60, 12 );
        Text [ en-US ] = "Close";
    };

    FixedLine RID_PA_FL_PRINTERS
    {
        Pos = MAP_APPFONT( 6, 5 );
        Size = MAP_APPFONT( 248, 8 );
        Text [ en-US ] = "Installed ~printers";
    };
    ListBox RID_PA_LB_DEV
    {
        HelpID = "padmin:ListBox:RID_PADIALOG:RID_PA_LB_DEV";
        Pos = MAP_APPFONT( 12, 15 );
        Size = MAP_APPFONT( 168, 80 );
        Border = TRUE;
        Sort = TRUE;
    };
    FixedText RID_PA_TXT_COMMAND
    {
        Pos = MAP_APPFONT( 10, 100 );
        Size = MAP_APPFONT( 40, 8 );
        Text [ en-US ] = "Command:";
    };
    FixedText RID_PA_TXT_COMMAND_STRING
    {
        Pos = MAP_APPFONT( 55, 100 );
        Size = MAP_APPFONT( 135, 8 );
    };
    FixedText RID_PA_TXT_DRIVER
    {
        Pos = MAP_APPFONT( 10, 110 );
        Size = MAP_APPFONT( 40, 8 );
        Text [ en-US ] = "Driver:";
    };
    FixedText RID_PA_TXT_DRIVER_STRING
    {
        Pos = MAP_APPFONT( 55, 110 );
        Size = MAP_APPFONT( 135, 8 );
    };
    FixedText RID_PA_TXT_LOCATION
    {
        Pos = MAP_APPFONT( 10, 120 );
        Size = MAP_APPFONT( 40, 8 );
        Text [ en-US ] = "Location:";
    };
    FixedText RID_PA_TXT_LOCATION_STRING
    {
        Pos = MAP_APPFONT( 55, 120 );
        Size = MAP_APPFONT( 135, 8 );
    };
    FixedText RID_PA_TXT_COMMENT
    {
        Pos = MAP_APPFONT( 10, 130 );
        Size = MAP_APPFONT( 40, 8 );
        Text [ en-US ] = "Comment:";
    };
    FixedText RID_PA_TXT_COMMENT_STRING
    {
        Pos = MAP_APPFONT( 55, 130 );
        Size = MAP_APPFONT( 135, 8 );
    };
    PushButton RID_PA_BTN_CONF
    {
        HelpID = "padmin:PushButton:RID_PADIALOG:RID_PA_BTN_CONF";
        Pos = MAP_APPFONT( 190, 15 );
        Size = MAP_APPFONT( 60, 12 );
        Text [ en-US ] = "Properties...";
    };
    PushButton RID_PA_BTN_RENAME
    {
        HelpID = "padmin:PushButton:RID_PADIALOG:RID_PA_BTN_RENAME";
        Pos = MAP_APPFONT( 190, 32 );
        Size = MAP_APPFONT( 60, 12 );
        Text [ en-US ] = "R~ename...";
    };
    PushButton RID_PA_BTN_STD
    {
        HelpID = "padmin:PushButton:RID_PADIALOG:RID_PA_BTN_STD";
        Pos = MAP_APPFONT( 190, 49 );
        Size = MAP_APPFONT( 60, 12 );
        Text [ en-US ] = "~Default";
    };
    PushButton RID_PA_BTN_DEL
    {
        HelpID = "padmin:PushButton:RID_PADIALOG:RID_PA_BTN_DEL";
        Pos = MAP_APPFONT( 190, 66 );
        Size = MAP_APPFONT( 60, 12 );
        Text [ en-US ] = "Remo~ve...";
    };
    PushButton RID_PA_TESTPAGE
    {
        HelpID = "padmin:PushButton:RID_PADIALOG:RID_PA_TESTPAGE";
        Pos = MAP_APPFONT( 190, 83 );
        Size = MAP_APPFONT( 60, 12 );
        Text [ en-US ] = "Test ~Page";
    };

    PushButton RID_PA_BTN_ADD
    {
        HelpID = "padmin:PushButton:RID_PADIALOG:RID_PA_BTN_ADD";
        Pos = MAP_APPFONT( 5, 181 );
        Size = MAP_APPFONT( 70, 12 );
        Text [ en-US ] = "New Printer...";
    };

    String RID_PA_STR_DEFPRT
    {
        Text [ en-US ] = "Default printer";
    };
    String RID_PA_STR_RENAME
    {
        Text [ en-US ] = "Rename";
    };
    Text [ en-US ] = "Printer Administration";
};

ModalDialog RID_STRINGQUERYDLG
{
    HelpID = "padmin:ModalDialog:RID_STRINGQUERYDLG";
    OutputSize = TRUE ;
    SVLook = TRUE ;
    Pos = MAP_APPFONT ( 10 , 10 ) ;
    Size = MAP_APPFONT ( 200 , 42 ) ;
    Moveable = TRUE ;
    Closeable = TRUE ;
    FixedText RID_STRQRY_TXT_RENAME
    {
        Pos = MAP_APPFONT ( 6 , 6 ) ;
        Size = MAP_APPFONT ( 130 , 16 ) ;
        Wordbreak=TRUE;
    };
    Edit RID_STRQRY_EDT_NEWNAME
    {
        HelpID = "padmin:Edit:RID_STRINGQUERYDLG:RID_STRQRY_EDT_NEWNAME";
        Border = TRUE ;
        Pos = MAP_APPFONT ( 6 , 23 ) ;
        Size = MAP_APPFONT ( 130 , 12 ) ;
    };
    ComboBox RID_STRQRY_BOX_NEWNAME
    {
        HelpID = "padmin:ComboBox:RID_STRINGQUERYDLG:RID_STRQRY_BOX_NEWNAME";
        Border = TRUE ;
        DropDown = TRUE;
        Pos = MAP_APPFONT ( 6 , 23 ) ;
        Size = MAP_APPFONT ( 130 , 200 ) ;
    };
    OKButton RID_STRQRY_BTN_OK
    {
        DefButton = TRUE ;
        Pos = MAP_APPFONT ( 145 , 6 ) ;
        Size = MAP_APPFONT ( 50 , 12 ) ;
    };
    CancelButton RID_STRQRY_BTN_CANCEL
    {
        Pos = MAP_APPFONT ( 145 , 23 ) ;
        Size = MAP_APPFONT ( 50 , 12 ) ;
    };
};

String RID_ERR_NOPRINTER
{
    Text [ en-US ] = "Could not open printer %s.";
};

String RID_PA_TXT_TESTPAGE_PRINTED
{
    Text [ en-US ] = "The test page was printed successfully. Please check the result.";
};

String RID_ERR_NOWRITE
{
    Text [en-US] = "No printers can be installed, because the file system is read-only.\nPlease contact your system administrator.";
};

String RID_QRY_PRTNAME
{
    Text [ en-US ] = "~New printer name";
};

String RID_TXT_TESTPAGE_MODEL
{
    Text [ en-US ] = "Model";
};

String RID_TXT_TESTPAGE_NAME
{
    Text [ en-US ] = "Name";
};

String RID_TXT_TESTPAGE_COMMENT
{
    Text [ en-US ] = "Comment";
};

String RID_TXT_TESTPAGE_QUEUE
{
    Text [ en-US ] = "Queue";
};

String RID_TXT_TESTPAGE_DATE
{
    Text [ en-US ] = "Date";
};

String RID_TXT_TESTPAGE_TIME
{
    Text [ en-US ] = "Time";
};


String RID_BXT_TESTPAGE
{
    Text [ en-US ] = "Test page";
};

String RID_BXT_ENVIRONMENT
{
    Text [ en-US ] = "Wrong environment";
};

String RID_YOU_SURE
{
    Text [ en-US ] = "Are you sure ?";
};

Bitmap RID_BUTTERFLY
{
    File = "source/butter.png" ;
};

Bitmap RID_BMP_SMALL_PRINTER
{
    File = "source/print.png";
};

Bitmap RID_BMP_SMALL_FAX
{
    File = "source/fax.png";
};

Bitmap RID_BMP_SMALL_PDF
{
    File = "source/pdf.png";
};

Bitmap RID_BMP_PRINTER
{
    File = "source/printer_large.png";
};

ModelessDialog RID_PROGRESS_DLG
{
    HelpID = "padmin:ModelessDialog:RID_PROGRESS_DLG";
    OutputSize = TRUE ;
    SVLook = TRUE ;
    Pos = MAP_APPFONT ( 10 , 10 ) ;
    Size = MAP_APPFONT ( 150 , 90 ) ;
    Moveable = TRUE ;
    Closeable = FALSE ;
    CancelButton RID_PROGRESS_BTN_CANCEL
    {
        Pos = MAP_APPFONT ( 50 , 71 ) ;
        Size = MAP_APPFONT ( 50 , 14 ) ;
    };
    FixedText RID_PROGRESS_OPERATION_TXT
    {
        Pos = MAP_APPFONT ( 6 , 6 ) ;
        Size = MAP_APPFONT ( 140 , 18 ) ;
    };
    FixedText RID_PROGRESS_PROGRESS_TXT
    {
        Pos = MAP_APPFONT( 6, 48 );
        Size = MAP_APPFONT( 140, 8 );
        Text [ en-US ] = "Progress";
    };
    Window RID_PROGRESS_STATUSBAR
    {
        SVLook = TRUE;
        Border = TRUE;
        Pos = MAP_APPFONT ( 6 , 58 ) ;
        Size = MAP_APPFONT( 140, 8 );
    };
    FixedText RID_PROGRESS_FILENAME_TXT
    {
        Pos = MAP_APPFONT ( 6 , 28 ) ;
        Size = MAP_APPFONT ( 140 , 8 ) ;
    };
    Text [ en-US ] = "Please wait";
};

ModalDialog RID_PPDIMPORT_DLG
{
    HelpID = "padmin:ModalDialog:RID_PPDIMPORT_DLG";
    OutputSize = TRUE ;
    SVLook = TRUE ;
    Size = MAP_APPFONT ( 265 , 225 ) ;
    Moveable = TRUE ;
    Closeable = TRUE ;

    FixedLine RID_PPDIMP_GROUP_PATH
    {
        Pos = MAP_APPFONT( 5, 5 );
        Size = MAP_APPFONT( 200, 8 );
        Text [ en-US ] = "Dri~ver directory";
    };
    FixedText RID_PPDIMP_TXT_PATH
    {
        Pos = MAP_APPFONT( 10, 33 );
        Size = MAP_APPFONT( 190, 8 );
        Text [ en-US ] = "Please select the driver directory.";
    };
    ComboBox RID_PPDIMP_LB_PATH
    {
        HelpID = "padmin:ComboBox:RID_PPDIMPORT_DLG:RID_PPDIMP_LB_PATH";
        Dropdown = TRUE;
        Border = TRUE;
        Sort = TRUE;

        Pos = MAP_APPFONT( 10, 15 );
        Size = MAP_APPFONT( 130, 80 );
    };
    PushButton RID_PPDIMP_BTN_SEARCH
    {
        HelpID = "padmin:PushButton:RID_PPDIMPORT_DLG:RID_PPDIMP_BTN_SEARCH";
        Pos = MAP_APPFONT( 145, 15 );
        Size = MAP_APPFONT( 50, 14 );
        Text [ en-US ] = "Browse...";
    };

    FixedLine RID_PPDIMP_GROUP_DRIVER
    {
        Pos = MAP_APPFONT( 5, 60 );
        Size = MAP_APPFONT( 200, 8 );
        Text [ en-US ] = "~Selection of drivers";
    };
    MultiListBox RID_PPDIMP_LB_DRIVER
    {
        HelpID = "padmin:MultiListBox:RID_PPDIMPORT_DLG:RID_PPDIMP_LB_DRIVER";
        Border = TRUE;
        Sort = TRUE;
        SimpleMode = TRUE;
        AutoHScroll = TRUE;
        Pos = MAP_APPFONT( 10, 70 );
        Size = MAP_APPFONT( 190, 120 );
    };
    FixedText RID_PPDIMP_TXT_DRIVER
    {
        Pos = MAP_APPFONT( 10, 195 );
        Size = MAP_APPFONT( 190, 60 );
        WordBreak = TRUE;
        Text [ en-US ] = "Please select the drivers to install and press \"%s\".";
    };
    String RID_PPDIMP_STR_LOADINGPPD
    {
        Text [ en-US ] = "Searching for drivers";
    };
    OKButton RID_PPDIMP_BTN_OK
    {
        DefButton = TRUE;
        Pos = MAP_APPFONT( 210, 10 );
        Size = MAP_APPFONT( 50, 14 );
    };
    CancelButton RID_PPDIMP_BTN_CANCEL
    {
        Pos = MAP_APPFONT( 210, 29 );
        Size = MAP_APPFONT( 50, 14 );
    };

    Text [ en-US ] = "Driver Installation";
};

String RID_QUERY_REMOVEDRIVER
{
    Text [ en-US ] = "Do you really want to remove the driver \"%s\"?";
};

String RID_QUERY_REMOVEPRINTER
{
    Text [ en-US ] = "Do you really want to remove this printer ?";
};

String RID_QUERY_DRIVERUSED
{
    Text [ en-US ] = "There are still printers using the driver \"%s\". Do you really want to remove it? The corresponding printers will also be removed.";
};

String RID_ERR_REMOVESGENPRT
{
    Text [ en-US ] = "The driver \"%s\" is always needed and can therefore not be removed.";
};

String RID_ERR_REMOVEDRIVERFAILED
{
    Text [ en-US ] = "The driver \"%s1\" could not be removed. It was not possible to remove the file\n\n%s2.";
};

String RID_ERR_REMOVEDEFAULTDRIVER
{
    Text [ en-US ] = "The driver \"%s\" is used by your default printer. Therefore, it cannot be removed.";
};

String RID_ERR_PRINTERNOTREMOVABLE
{
    Text [ en-US ] = "The printer %s cannot be removed.";
};

String RID_TXT_PRINTERALREADYEXISTS
{
    Text [ en-US ] = "A printer named \"%s\" already exists. This printer will not be imported.";
};

String RID_TXT_PRINTERWITHOUTCOMMAND
{
    Text [ en-US ] = "The printer \"%s\" has no valid configuration and, therefore, cannot be imported.";
};

String RID_TXT_DRIVERDOESNOTEXIST
{
    Text [ en-US ] = "The driver for the printer \"%s1\" (%s2) is not installed. Therefore the printer cannot be imported.";
};

String RID_TXT_PRINTERADDFAILED
{
    Text [ en-US ] = "The printer \"%s\" could not be added.";
};

ModalDialog RID_ADD_PRINTER_DIALOG
{
    HelpID = "padmin:ModalDialog:RID_ADD_PRINTER_DIALOG";
    OutputSize = TRUE ;
    SVLook = TRUE ;
    Size = MAP_APPFONT ( 240 , 172 ) ;
    Moveable = TRUE ;
    Closeable = TRUE ;

    Control RID_ADDP_CTRL_TITLE
    {
        Pos = MAP_APPFONT( 0, 0 );
        Size = MAP_APPFONT( 240, 26 );
    };
    FixedLine RID_ADDP_LINE
    {
        Pos = MAP_APPFONT( 0, 150 );
        Size = MAP_APPFONT( 240, 2 );
    };
    OKButton RID_ADDP_BTN_FINISH
    {
        Pos = MAP_APPFONT( 185, 155 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "~Finish";
    };
    CancelButton RID_ADDP_BTN_CANCEL
    {
        Pos = MAP_APPFONT( 5, 155 );
        Size = MAP_APPFONT( 50, 12 );
    };
    PushButton RID_ADDP_BTN_NEXT
    {
        HelpID = "padmin:PushButton:RID_ADD_PRINTER_DIALOG:RID_ADDP_BTN_NEXT";
        Pos = MAP_APPFONT( 130, 155 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "~Next >>";
    };
    PushButton RID_ADDP_BTN_PREV
    {
        HelpID = "padmin:PushButton:RID_ADD_PRINTER_DIALOG:RID_ADDP_BTN_PREV";
        Pos = MAP_APPFONT( 75, 155 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "<< ~Back";
    };
    Text [ en-US ] = "Add Printer";
};

TabPage RID_ADDP_PAGE_CHOOSEDRIVER
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_CHOOSEDRIVER";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Choose a driver";
    };
    FixedText RID_ADDP_CHDRV_TXT_DRIVER
    {
        Pos = MAP_APPFONT( 5, 5 );
        Size = MAP_APPFONT( 230, 8 );
        Text [ en-US ] = "Please select a s~uitable driver.";
    };
    ListBox RID_ADDP_CHDRV_BOX_DRIVER
    {
        HelpID = "padmin:ListBox:RID_ADDP_PAGE_CHOOSEDRIVER:RID_ADDP_CHDRV_BOX_DRIVER";
        Pos = MAP_APPFONT( 5, 15 );
        Size = MAP_APPFONT( 175, 100 );
        Border = TRUE;
        Sort = TRUE;
    };
    PushButton RID_ADDP_CHDRV_BTN_ADD
    {
        HelpID = "padmin:PushButton:RID_ADDP_PAGE_CHOOSEDRIVER:RID_ADDP_CHDRV_BTN_ADD";
        Pos = MAP_APPFONT( 185, 15 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "~Import...";
    };
    PushButton RID_ADDP_CHDRV_BTN_REMOVE
    {
        HelpID = "padmin:PushButton:RID_ADDP_PAGE_CHOOSEDRIVER:RID_ADDP_CHDRV_BTN_REMOVE";
        Pos = MAP_APPFONT( 185, 32 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "~Delete";
    };
    String RID_ADDP_CHDRV_STR_REMOVE
    {
        Text [ en-US ] = "Delete driver";
    };
};

TabPage RID_ADDP_PAGE_CHOOSEDEV
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_CHOOSEDEV";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Choose a device type";
    };
    FixedText RID_ADDP_CHDEV_TXT_OVER
    {
        Pos = MAP_APPFONT( 40, 25 );
        Size = MAP_APPFONT( 180, 8 );
        Text [ en-US ] = "Do you want to";
    };
    RadioButton RID_ADDP_CHDEV_BTN_PRINTER
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_CHOOSEDEV:RID_ADDP_CHDEV_BTN_PRINTER";
        Pos = MAP_APPFONT ( 40, 40 );
        Size = MAP_APPFONT( 180, 10 );
        Text [ en-US ] = "Add a ~printer";
    };
    RadioButton RID_ADDP_CHDEV_BTN_FAX
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_CHOOSEDEV:RID_ADDP_CHDEV_BTN_FAX";
        Pos = MAP_APPFONT ( 40, 50 );
        Size = MAP_APPFONT( 180, 10 );
        Text [ en-US ] = "Connect a fa~x device";
    };
    RadioButton RID_ADDP_CHDEV_BTN_PDF
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_CHOOSEDEV:RID_ADDP_CHDEV_BTN_PDF";
        Pos = MAP_APPFONT ( 40, 60 );
        Size = MAP_APPFONT( 180, 10 );
        Text [ en-US ] = "Connect a P~DF converter";
    };
    RadioButton RID_ADDP_CHDEV_BTN_OLD
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_CHOOSEDEV:RID_ADDP_CHDEV_BTN_OLD";
        Pos = MAP_APPFONT ( 40, 70 );
        Size = MAP_APPFONT( 180, 10 );
        Text [ en-US ] = "~Import printers from a StarOffice installation";
    };
};

TabPage RID_ADDP_PAGE_NAME
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_NAME";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Choose a name";
    };
    FixedText RID_ADDP_NAME_TXT_NAME
    {
        Pos = MAP_APPFONT( 40, 25 );
        Size = MAP_APPFONT( 220, 8 );
        Text [ en-US ] = "Please enter a name for the printer.";
    };
    FixedText RID_ADDP_NAME_TXT_FAXNAME
    {
        Pos = MAP_APPFONT( 40, 25 );
        Size = MAP_APPFONT( 220, 8 );
        Text [ en-US ] = "Please enter a name for the fax connection.";
    };
    FixedText RID_ADDP_NAME_TXT_PDFNAME
    {
        Pos = MAP_APPFONT( 40, 25 );
        Size = MAP_APPFONT( 220, 8 );
        Text [ en-US ] = "Please enter a name for the PDF connection.";
    };
    Edit RID_ADDP_NAME_EDT_NAME
    {
        HelpID = "padmin:Edit:RID_ADDP_PAGE_NAME:RID_ADDP_NAME_EDT_NAME";
        Pos = MAP_APPFONT( 40, 35 );
        Size = MAP_APPFONT( 160, 12 );
        Border = TRUE;
    };
    Edit RID_ADDP_NAME_EDT_FAXNAME
    {
        HelpID = "padmin:Edit:RID_ADDP_PAGE_NAME:RID_ADDP_NAME_EDT_FAXNAME";
        Pos = MAP_APPFONT( 40, 35 );
        Size = MAP_APPFONT( 160, 12 );
        Border = TRUE;
        Text [ en-US ] = "Fax printer";
    };
    Edit RID_ADDP_NAME_EDT_PDFNAME
    {
        HelpID = "padmin:Edit:RID_ADDP_PAGE_NAME:RID_ADDP_NAME_EDT_PDFNAME";
        Pos = MAP_APPFONT( 40, 35 );
        Size = MAP_APPFONT( 160, 12 );
        Border = TRUE;
        Text [ en-US ] = "PDF converter";
    };
    CheckBox RID_ADDP_NAME_BOX_DEFAULT
    {
        HelpID = "padmin:CheckBox:RID_ADDP_PAGE_NAME:RID_ADDP_NAME_BOX_DEFAULT";
        Pos = MAP_APPFONT( 40, 50 );
        Size = MAP_APPFONT( 160, 12 );
        Text [ en-US ] = "~Use as default printer";
    };
    CheckBox RID_ADDP_NAME_BOX_FAXSWALLOW
    {
        HelpID = "padmin:CheckBox:RID_ADDP_PAGE_NAME:RID_ADDP_NAME_BOX_FAXSWALLOW";
        Pos = MAP_APPFONT( 40, 50 );
        Size = MAP_APPFONT( 160, 12 );
        Text [ en-US ] = "Remo~ve fax number from output";
    };
};

TabPage RID_ADDP_PAGE_COMMAND
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_COMMAND";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Choose a command line";
    };
    FixedText RID_ADDP_CMD_TXT_COMMAND
    {
        Pos = MAP_APPFONT( 10, 2 );
        Size = MAP_APPFONT( 160, 24 );
        WordBreak = TRUE;
        Text [ en-US ] = "Please enter a c~ommand line appropriate for this device.";
    };
    ComboBox RID_ADDP_CMD_BOX_COMMAND
    {
        HelpID = "padmin:ComboBox:RID_ADDP_PAGE_COMMAND:RID_ADDP_CMD_BOX_COMMAND";
        Pos = MAP_APPFONT( 10, 30);
        Size = MAP_APPFONT( 220, 85 );
        Border = TRUE;
    };
    ComboBox RID_ADDP_CMD_BOX_PDFCOMMAND
    {
        HelpID = "padmin:ComboBox:RID_ADDP_PAGE_COMMAND:RID_ADDP_CMD_BOX_PDFCOMMAND";
        Pos = MAP_APPFONT( 10, 30);
        Size = MAP_APPFONT( 220, 60 );
        Border = TRUE;
    };
    FixedText RID_ADDP_CMD_TXT_PDFDIR
    {
        Pos = MAP_APPFONT( 10, 95 );
        Size = MAP_APPFONT( 220, 8 );
        Text [ en-US ] = "PDF ~target directory";
    };
    Edit RID_ADDP_CMD_EDT_PDFDIR
    {
        HelpID = "padmin:Edit:RID_ADDP_PAGE_COMMAND:RID_ADDP_CMD_EDT_PDFDIR";
        Border = TRUE;
        Pos = MAP_APPFONT( 10, 104 );
        Size = MAP_APPFONT( 190, 12 );
    };
    PushButton RID_ADDP_CMD_BTN_PDFDIR
    {
        HelpID = "padmin:PushButton:RID_ADDP_PAGE_COMMAND:RID_ADDP_CMD_BTN_PDFDIR";
        Pos = MAP_APPFONT( 205, 104 );
        Size = MAP_APPFONT( 25, 12 );
        Text = "~...";
    };
    PushButton RID_ADDP_CMD_BTN_HELP
    {
        HelpID = "padmin:PushButton:RID_ADDP_PAGE_COMMAND:RID_ADDP_CMD_BTN_HELP";
        Pos = MAP_APPFONT( 180, 2 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "~Help";
    };
    String RID_ADDP_CMD_STR_PDFHELP
    {
        Text [ en-US ] = "The command line for PDF converters is executed as follows: for each document printed, \"(TMP)\" in the command line is replaced by a temporary file and \"(OUTFILE)\" in the command line is replaced by the target PDF file name. If \"(TMP)\" is in the command line, the PostScript code will be supplied via a file, otherwise via standard input (i.e. as a pipe).";
    };
    String RID_ADDP_CMD_STR_FAXHELP
    {
        Text [ en-US ] = "The command line for fax connections is executed as follows: for each fax sent, \"(TMP)\" in the command line is replaced by a temporary file and \"(PHONE)\" in the command line is replaced by the fax number. If \"(TMP)\" appears in the command line, the PostScript code will be supplied via a file, otherwise it is passed as standard input (i.e. as a pipe).";
    };
};

TabPage RID_ADDP_PAGE_OLDPRINTERS
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_OLDPRINTERS";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Import printers from old versions";
    };
    FixedText RID_ADDP_OLD_TXT_PRINTERS
    {
        Pos = MAP_APPFONT( 10, 10 );
        Size = MAP_APPFONT( 165, 25 );
        WordBreak = TRUE;
        Text [ en-US ] = "~These printers can be imported. Please select the ones you want to import.";
    };
    MultiListBox RID_ADDP_OLD_BOX_PRINTERS
    {
        HelpID = "padmin:MultiListBox:RID_ADDP_PAGE_OLDPRINTERS:RID_ADDP_OLD_BOX_PRINTERS";
        Pos = MAP_APPFONT( 10, 35 );
        Size = MAP_APPFONT( 165, 80 );
        Border = TRUE;
    };
    PushButton RID_ADDP_OLD_BTN_SELECTALL
    {
        HelpID = "padmin:PushButton:RID_ADDP_PAGE_OLDPRINTERS:RID_ADDP_OLD_BTN_SELECTALL";
        Pos = MAP_APPFONT( 180, 35 );
        Size = MAP_APPFONT( 50, 12 );
        Text [ en-US ] = "~Select All";
    };
};

TabPage RID_ADDP_PAGE_FAXDRIVER
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_FAXDRIVER";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Choose a driver";
    };
    FixedText RID_ADDP_FAXDRV_TXT_DRIVER
    {
        Pos = MAP_APPFONT( 40, 20 );
        Size = MAP_APPFONT( 160, 19 );
        WordBreak = TRUE;
        Text [ en-US ] = "Use the following driver for this fax connection";
    };
    RadioButton RID_ADDP_FAXDRV_BTN_DEFAULT
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_FAXDRIVER:RID_ADDP_FAXDRV_BTN_DEFAULT";
        Pos = MAP_APPFONT( 40,40 );
        Size = MAP_APPFONT( 160, 10 );
        Text [ en-US ] = "T~he default driver";
    };
    RadioButton RID_ADDP_FAXDRV_BTN_SELECT
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_FAXDRIVER:RID_ADDP_FAXDRV_BTN_SELECT";
        Pos = MAP_APPFONT( 40, 50 );
        Size = MAP_APPFONT( 160,24 );
        Text [ en-US ] = "A speci~fic driver, to adapt the format to another printer";
    };
};

TabPage RID_ADDP_PAGE_PDFDRIVER
{
    HelpID = "padmin:TabPage:RID_ADDP_PAGE_PDFDRIVER";
    Hide = TRUE;
    Pos = MAP_APPFONT( 0, 30 );
    Size = MAP_APPFONT( 240, 120 );
    String RID_ADDP_STR_TITLE
    {
        Text [ en-US ] = "Choose a driver";
    };
    FixedText RID_ADDP_PDFDRV_TXT_DRIVER
    {
        Pos = MAP_APPFONT( 40, 20 );
        Size = MAP_APPFONT( 160, 19 );
        WordBreak = TRUE;
        Text [ en-US ] = "Use the following driver for this PDF converter";
    };
    RadioButton RID_ADDP_PDFDRV_BTN_DEFAULT
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_PDFDRIVER:RID_ADDP_PDFDRV_BTN_DEFAULT";
        Pos = MAP_APPFONT( 40, 40 );
        Size = MAP_APPFONT( 160, 10 );
        Text [ en-US ] = "T~he default driver";
    };
    RadioButton RID_ADDP_PDFDRV_BTN_DIST
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_PDFDRIVER:RID_ADDP_PDFDRV_BTN_DIST";
        Pos = MAP_APPFONT( 40,50 );
        Size = MAP_APPFONT( 160, 10 );
        Text [ en-US ] = "The Adobe D~istiller(tm) driver";
    };
    RadioButton RID_ADDP_PDFDRV_BTN_SELECT
    {
        HelpID = "padmin:RadioButton:RID_ADDP_PAGE_PDFDRIVER:RID_ADDP_PDFDRV_BTN_SELECT";
        Pos = MAP_APPFONT( 40, 60 );
        Size = MAP_APPFONT( 160, 24 );
        Text [ en-US ] = "A spec~ific driver, to adapt the format to another printer";
    };
};

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */