Contains common settings which are potentially shared by other components.MAVContains a container for passwords.Contains a password encoded with the master password.ASContains settings for a history entry in the history list.Specifies the document URL.Specifies the filter name that was chosen to load the document.Indicates the title of the URL that is displayed on the user-interface.Contains an encoded password used to open the document.ASDescribes a menu entry for configurable office menus (e.g. file new).Specifies the URL for dispatch.Specifies the label of a menu entry.Specifies the identifier of an assigned icon.Specifies the dispatch target (for example, _blank to open URL in new frame).PBContains the width and height of the dialog size.Contains the height of the dialog [UNIT=pixel].Contains the width of the dialog [UNIT=pixel].OJDescribes the characteristics of a font.Specifies the exact name of the font ("Arial","Courier", "Frutiger").Specifies the height of the font in the measure of the destination.Specifies the width of the font in the measure of the destination.Specifies the style name of the font ("Bold", "Italic", "Italic Bold").Specifies the general style of the font.DONTKNOWDECORATIVEMODERNROMANSCRIPTSWISSSYSTEMDONTKNOWSpecifies the character set which is supported by the font.DONTKNOWANSIMACIBMPC_437IBMPC_850IBMPC_860IBMPC_861IBMPC_863IBMPC_865SYSTEMSYMBOLSpecifies the pitch of the font.DONTKNOWFIXEDVARIABLESpecifies the character width. Depending on the specified width, a font that supports this width may be selected. [UNIT=%].Specifies the thickness of the line.Specifies if there is a character slant (italic).NONEOBLIQUE ITALICDONTKNOWREVERSE_OBLIQUEREVERSE_ITALICSpecifies the type of underline.NONESINGLEDOUBLEDOTTEDDONTKNOWDASHLONGDASHDASHDOTDASHDOTDOTSMALLWAVEWAVEDOUBLEWAVEBOLDBOLDDOTTEDBOLDDASHBOLDLONGDASHBOLDDASHDOTBOLDDASHDOTDOTBOLDWAVESpecifies the type of strikeout.NONESINGLEDOUBLEDONTKNOWBOLDSLASHXSpecifies the rotation of the font. [UNIT=degree].Specifies if a kerning table is available (for requesting). For selecting, specifies if the kerning table is to be used.Specifies if only words get underlined.Specifies the technology of the font representation.DONTKNOWRASTERDEVICESCALABLEOSContains settings for the font replacement.Contains the name of font that is to be replaced.Contains the name of the replacing font.Determines if the font pair replacement is applied on the screen.falseDetermines if the font pair replacement is applied on the printer.falseUse LogicalGraphicSize instead of this.SJSpecifies the size of a graphic. [UNIT=1/100 mm].Specifies the width of graphic. [UNIT=1/100 mm].Represents the highest value that can be entered in the dialog.Represents the lowest value that can be entered in the dialog.10000Specifies the height of graphic. [UNIT=1/100 mm].Represents the lowest value that can be entered in the dialog.Represents the highest value that can be entered in the dialog.10000SJSpecifies the logical size of a graphic. [UNIT=1/100 mm].Specifies the logical width of a graphic. [UNIT=1/100 mm].Represents the lowest value that can be entered in the dialog.Represents the highest value that can be entered in the dialog.10000Specifies the logical height of graphic. [UNIT=1/100 mm].Represents the lowest value that can be entered in the dialog.Represents the highest value that can be entered in the dialog.10000Replaced by org.openoffice.Office.Embedding/ObjectName.MAVDeprecatedMAVDeprecatedMAVDeprecatedASSpecifies an entry of the recovery list which is then used by CrashGuard to save information about the last opened files.Specifies an URL that should be recovered after the next Office start.Specifies a filter that should be used to open the document referenced by the URL property.Contains the name of the temporary file which represents the document.OSContains the characters (so called forbidden characters) that are not allowed at the beginning or end of a line.Contains the characters that are not allowed at the beginning of a line.Contains the characters that are not allowed at the end of a line.MBAStores an association between a numeric value and a name.Specifies a name that is associated with a counter.Specifies a number that is associated with a name.Without replacement.OBRContains the command line profile for external mail applications.Contains the different string tokens for "to" and "cc" etc. Addresses will be concatenated to create the command line.Contains the fixed text (optional) preceding the mail arguments.Contains the string token describing the "from" address field.Contains the string token describing the "to" address field.Contains the string token describing the "cc" address field.Contains the string token describing the "bcc" address field.Contains the string token describing the subject.Contains the string token describing the attachments of the message.Contains the string token describing the body of the message.Contains the delimiters used to separate values for various command line parameters of the external mailer.Contains the delimiter used between the external mailer name and the "to" field.Contains the delimiters between different cc addressees.Contains the delimiters between different bcc addressees.Contains the delimiters between different attachments.Use cfg package Jobs instead of this.ASUse cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.GTAll Certificate informations needed to handle and identify the signature.Subject name of Certificate.Serial Number of Certificate.Raw of Certificate.FSspecifies, on a per-application-type basis, certain defaults for layouting form controlsspecifies the default visual effect for form controlsspecifies no special visual effectspecifies a flat appearancespecifies a 3D appearance
specifies whether the controls should use dynamic border coloring, if possible.
Dymamic border coloring means that when the mouse is hovered over a control, and when a control receives the focus, this is indicated with special border colors.
false
controls whether form controls, when they render their text, use the same metrics as the document
does. If this is set to <true>, then the control text's appearance better matches the text
in the surrounding document.</p>
<p>Technically, documents use a reference device for formatting, which usually has a higher
resolution than the actual output device. The option decides whether form controls should use
the same reference device as the surrounding document. However, some of OOo's document implementations
do not properly use their reference device in all situations, in which case the option might better
be disabled.<p>
trueStores registration data which is related to a specific product version.An instance UUID associated with the product version ID.MAVContains internal MSExport settings that are common for all apps.Specifies if an old ( 5.0 format )way instead of a new one ( 6.0 OLE embedded document ) should be used for export of inplace objects in case MS-filters are not used for them.falseMAVContains a description of the persistent password container.Specifies if passwords can be stored persistently.falseSpecifies if there is a valid master password.falseContains the master password encrypted by itself.Contains a list of passwords encoded with the master password.KSOContains a list of URLs that should be accessed using system credentials of the user.AWSpecifies settings for the 3D engine.AWSpecifies if dithering is used to display more colors with few colors available.trueAWSpecifies if 3D graphics from Draw and Impress will be displayed on the user's system using an OpenGL capable hardware. If the system does not have an OpenGL capable hardware, this setting will be ignored. The 3D display is always done per software.falseAWSpecifies whether all geometry data will be simultaneously transferred in an array to the graphic driver. Not every graphic driver correctly supports this OpenGL capability. For this reason, this option can be deactivated in case of presentation errors of 3D output. All geometry data will be then transferred as single components. This option is only available if OpenGL is used, otherwise it is disabled.trueAWSpecifies interaction with full display. If a 3-D object is rotated or moved, the full display is rotated or moved and not a grid frame.falseCDContains settings related to dictionaries.CDSpecifies a repository URL where users can download additional dictionaries.AWSpecifies settings for the Drawinglayer.AWSpecifies if the Overlay pane is allowed to use an own buffer. If on, Overlay is fast but a buffer (graphics memory) is used. If off, Overlay is slow, but no Buffer is needed. This is the global switch which will enable/disable overlay for all Applications. This is the global switch for the whole office.trueAWSimilar to OverlayBuffer, but only for Calc ApplicationtrueAWSimilar to OverlayBuffer, but only for Writer ApplicationtrueAWSimilar to OverlayBuffer, but only for Draw/Impress ApplicationstrueAWSpecifies if the Application Repaint shall use a buffer for Pre-Rendering. If on, screen flicker is greatly reduced and remote display is fast, but a buffer (graphics memory) is needed. If off, screen flicker will occurr and remote display is slow, but no buffer is needed. This is the global switch for the whole office.trueAWSimilar to PaintBuffer, but only for Calc Application. PaintBuffer is the global switch.trueAWSimilar to PaintBuffer, but only for Writer Application. PaintBuffer is the global switch.trueAWSimilar to PaintBuffer, but only for Draw/Impress Applications. PaintBuffer is the global switch.trueAWSpecifies the first one of two colors used from overlay to display striped lines as helplines. Default is black.0AWSpecifies the second one of two colors used from overlay to display striped lines as helplines. Default is white.16777215AWSpecifies the length in pixels of a single stripe used from overlay to display striped lines as helplines. Default is four.4AWSpecifies the maximum allowed Paper Width for page definitions in cm. Default is 3m, i.e. 300 cm. When this is changed to higher values, it is done on own risk.300AWSpecifies the maximum allowed Paper Height for page definitions in cm. Default is 3m, i.e. 300 cm. When this is changed to higher values, it is done on own risk.300AWSpecifies the maximum allowed Left Margin for the page definitions in 1/100th cm.9999AWSpecifies the maximum allowed Right Margin for the page definitions in 1/100th cm.9999AWSpecifies the maximum allowed Top Margin for the page definitions in 1/100th cm.9999AWSpecifies the maximum allowed Bottom Margin for the page definitions in 1/100th cm.9999AW
This switch allows to switch DrawingLayer based views to be rendered using AntiAliasing or not.
Of course this takes only effect when AntiAliasing is supported for the System OOo is running on.
trueAW
This switch allows to enhance visualisation of graphics which use Horizontal or Vertical Hairlines
combined with AntiAliased mode (e.g. in 2D charts). When not used, those lines will be AntiAliased
as everything else. Since this is not pleasing for the eye, this option allows to force those lines
to snap to discrete points (pixels) when activated and thus avoids AntiAliasing of pure Horizontal or
Vertical Hairlines.
trueAW
This switch determines if the decorations of decorated text portions (e.g. underline, strike through)
are rendered using VCL direct rendering or if the primitive is decomposed into simple text and the
corresponding geometrical representations of the decorations. Default is true since VCL's usage
of the diverse System's hinting possibilities for decorations is useful.
trueAW
This switch determines if simple text is directly rendered using VCL or not. If not, the simple text
is decomposed into PolyPolygons which will be painted then. Default is true, since VCL will use the
hinting for font rendering on the diverse supported systems, which gives better quality than rendering
the text as Polygons.
trueAW
This switch decides if Interactions in the DrawingLayer are visualized using Wireframe or Full-Object
previews. If false, only Wireframe will be used. If true, Full-Object preview which gives a much better
feedback about the object interaction will be used. This mode is used for modification and creation of
objects. During interaction, a geometric copy of the object(s) is shown with 50% transparence in the
foreground. That copy shows exactly what You will get when You end the interaction.
trueAW
This defines a Limitation for the default raster conversion from 3D Scenes to Bitmaps.
The number is the maximum number of pixels to use, e.g. 1000x1000 Pixels is allowed as default.
When Scenes would need more Pixels than this, the Bitmap will be limited and scaled to the needed pixel size at paint time.
1000000AW
This defines a Limitation for the default raster conversion of FormControls in edit mode.
These have the ability to be displayed using this fallback to Bitmaps.
The number is the maximum number of pixels to use, e.g. 300x150 Pixels is allowed as default.
When FormControls would need more Pixels than this, the Bitmap will be limited and scaled to the needed pixel size at paint time.
45000AW
This switch defines if the selections in the applications (text or cells) are visualized using
inverse (XOR) when set to false (the old selection method, also used when in HighContrast mode)
or a transparent overlay selection using the system's selection color.
trueAW
Specifies the degree of transparence to be used when transparent selection is used. The value is a percent
value. Since neither no transparence nor complete transparence makes sense, the value is limited to a range
of 10% - 90%. If the given value is outside this range, it is cropped to it.
75AW
Specifies the maximum allowed luminance the system's selection color may have. When the color
fetched from the system is brighter (luminacne is bigger), it will be scaled to a luminance
of exactly this given value.
70OSContains miscellaneous settings for the auto correction.OSSpecifies if the replacement table should be used to replace letter combinations with defined texttrueOSSpecifies if two initial capitals should be corrected automatically.trueOSSpecifies if the letter at the beginning of a sentence should be capitalized automatically.trueOSSpecifies if text should be formatted in bold or underlined when the corresponding characters are entered (*bold*, _underline_).trueOSSpecifies if character strings which could represent an URL should be converted to a hyperlink.trueOSSpecifies if ordinal numbers should be displayed with raised endings.trueOSSpecifies if minus signs should be replaced by dashes automatically.truecedricbosdoAdds a non-breaking space before the characters :;!? in french.trueOSSpecifies if multiple spaces should be combined into one.falseKohei YoshidaSpecifies whether or not to correct accidental use of CAPS lock key.trueOSSpecifies if single quotes should be replaced.falseOSSpecifies the start single quote.OSSpecifies the end single quote.OSSpecifies if double quotes should be replaced.trueOSSpecifies the start quote.OSSpecifies the end quote.Contains settings to apply replacement rules and exceptions.OSSpecifies if defined words with two initial capital letters should not be included in the AutoCorrect replacement.trueOSSpecifies if defined abbreviations should be taken into account to exclude a preceding capital letter.trueAFSpecifies cache related options.AFSpecifies the cache related options for the drawing engine.AFDetermines the maximum number of OLE objects that can be held in RAM for drawings, presentations and inserted drawing objects. The fewer OLE objects contained in RAM, the more space is available for other functions. The more OLE objects in RAM, the faster you can page through the objects since they do not always need to be loaded from the hard drive.20AFSpecifies the cache related options for Writer.AFDetermines the maximum number of OLE objects that can be held in RAM for the writer. The fewer OLE objects contained in RAM, the more space is available for other functions. The more OLE objects in RAM, the faster you can page through the objects since they do not always need to be loaded from the hard drive.20Specifies a group of graphic manager cache options.AFSpecifies the maximum cache size for all graphical display objects.22000000AFSpecifies the maximum cache size for a single graphic display object.5500000AFSpecifies the time in seconds after which a cached object is freed from the cache.600MBAContains the current and default path settings used by the Office.CDContains various properties information purpose only.A flag which is set by the tools options dialog whenever a user changed the work path.trueMBAContains the global path settings, mainly those of the Options dialog.MBAContains the Office installation path.MBAContains the Office installation path in URL notation. Must match the UCB configuration.NNSpecifies the directory that contains spreadsheet add-ins which use the old add-in API.$(progpath)/addinOSSpecifies the settings of the AutoCorrect dialog.$(insturl)/share/autocorr:$(userurl)/autocorrOSContains the directory which contains the AutoText modules.$(insturl)/share/autotext/$(vlang):$(userurl)/autotextMBAStores the automatic backup copies of documents.$(userurl)/backupMBAContains the Basic files, which are used by the AutoPilots.$(insturl)/share/basic:$(userurl)/basicMBAContains the bitmap files which can be used for menu and toolbar icons.$(insturl)/share/config/symbolMBAContains the configuration files. This value cannot be changed through the user interface.$(insturl)/share/configTLContains the provided dictionaries.$(insturl)/share/wordbook/$(vlang)PBSpecifies the path to save folder bookmarks.$(userurl)/config/foldersMBASpecifies the directory where all the filters are stored.$(progpath)/filterAFSpecifies the directory which contains the Gallery database and multimedia files.$(insturl)/share/gallery:$(userurl)/galleryDLSpecifies the directory that is displayed when the dialog for opening a graphic or for saving a new graphic is called.$(userurl)/galleryABISpecifies the path to the Office help files.$(instpath)/helpTLContains the files that are necessary for the spellcheck.$(insturl)/share/dictMBAContains the Office modules.$(progpath)DLSpecifies the path to the palette files *.SOB to *.SOF containing user-defined colors and patterns.$(userurl)/configMBASpecifies the directory in which the plugins are saved.$(progpath)/pluginWithout replacement.ABISpecifies the location where misc data are stored.$(userpath)/storeReplaced by org.openoffice.Office.Paths/TempMBASpecifies the base directory used by the Office to store temp files.MBASpecifies the templates originate from these folders and sub-folders.$(insturl)/share/template/$(vlang):$(insturl)/share/template:$(userurl)/templateMBASpecifies additional folders containing a global user interface configuration. The final user interface configuration is merged from UserConfig and from these folders.$(insturl)/share/configMBASpecifies the folder with the user settings.$(userurl)/configTLContains the custom dictionaries.$(userurl)/wordbookMBASpecifies the path of the work folder, which can be modified according to the user's needs. The path specified here can be seen in the Open or Save dialog.$(work)MBAContains the default values of all the paths, which can be modified according to the user's needs. They are used when pressing the Standard-button in the Options dialog.Specifies the default directory that contains spreadsheet add-ins which use the old add-in API.$(progpath)/addinSpecifies the default directory for the settings of the AutoCorrect dialog.$(insturl)/share/autocorr:$(userurl)/autocorrSpecifies the default directory where the AutoText modules are located.$(insturl)/share/autotext/$(vlang):$(userurl)/autotextSpecifies the default directory for the automatic backup copies of documents.$(userurl)/backupSpecifies the default directory where the Basic files, used by the AutoPilots, are located.$(insturl)/share/basic:$(userurl)/basicSpecifies the default directory where the bitmap files, which can be used for the menu and toolbar icons, are located.$(insturl)/share/config/symbolSpecifies the default directory where the configuration files are stored.$(insturl)/share/configSpecifies the default directory where the provided dictionaries are located.$(insturl)/share/wordbook/$(vlang)Specifies the default directory where folder bookmarks are stored.$(userurl)/config/foldersSpecifies the default directory where all the filters are stored.$(progpath)/filterSpecifies the default directory where the Gallery database and multimedia files are located.$(insturl)/share/gallery:$(userurl)/gallerySpecifies the default directory used by the dialog for opening a graphic or for saving a new graphic.$(userurl)/gallerySpecifies the default directory where Office help files are located.$(instpath)/helpSpecifies the default directory where the files that are necessary for the spellcheck are saved.$(insturl)/share/dictSpecifies the default directory which contains the Office modules.$(progpath)Specifies the default directory for the palette files *.SOB to *.SOF containing user-defined colors and patterns.$(userurl)/configSpecifies the default directory where the Office plugins are located.$(progpath)/pluginSpecifies the default directory that is used as a base directory for all temporary Office files.$(temp)Specifies the default directory where all provided templates are located in folders and sub-folders.$(insturl)/share/template/$(vlang):$(insturl)/share/template:$(userurl)/templateSpecifies the default directories for the global user interface configuration. The final user interface configuration is merged from UserConfig and from these folders.Specifies the default directory which stores the user settings.$(userurl)/configSpecifies the default directory which stores the custom dictionaries.$(userurl)/wordbookSpecifies the default working directory where user stores documents.$(work)OSContains some common settings for fonts.OSContains settings for the font substitution.OSDetermines if the list of font replacements is applied or notfalseOSSpecifies a substitution of the requested font, even if this font is available on the user's system.PBContains the settings for the font selection box in the object bar.PBContains the last five fonts, which are shown on the top of a list, beginning with the last one. This list will be displayed on the font-name-box of the object bar.truePBSpecifies that the names of the selectable fonts will be displayed with this font.trueOSSpecifies the font name and height used in HTML source viewSpecifies the name of the font that is used in source views (HTML source view or BASIC IDE)Specifies the height, in points, of the font that is used in source views (HTML source view or BASIC IDE)10Specifies whether only non-proportional font should be presented on the dialog page.trueAFSpecifies Gallery options.AFDeprecated.falseASContains information about configurable menus.Contains all entries of new menu.Contains all entries of wizard menu.PBContains all help bookmarks.ASContains history information.PBDescribes the range and current size of the help bookmark history list.Defines the minimum range of the help bookmark history list.Defines the maximum range of the help bookmark history list.10000Describes the range and current size of the history list.Defines the min range for the history size.Defines the max range for the history size.100Describes the range and current size of the picklist shown inside the menu.Defines the min range for the picklist size.Defines the max range for the picklist size.10Contains the most recently opened help documents.Contains the most recently opened documents.Contains the most recently used documents displayed in the file menu.MBAContains settings which are used during the Office startup to check for unfinished work.MBASends a mail that includes the stack trace after a crash.falseMBAEnables UI for sending document as e-mailfalseMBAEnables mechanism for centralized disabling of functionalityfalseBMSpecifies that If this option is set to true, the new development chart library is used instead of the standard one. Do not set this option to true unless you know exactly what to do. This new library will be unstable and incomplete most of the time. This flag will be removed when the new library is in a stable state.falseCDSpecifies the current or last temp directory. This directory will be removed during shutdown or next office start.ASContains the documents that were opened when the office crashed.MBAContains general settings about the saving process.MBASpecifies if the all open windows and documents should be saved. If set to true, the URLs of all open documents and all view properties of all open views are saved when terminating the application.falseMBAContains settings which specify how documents are saved.MBASaves OOo 6.0 XML file documents unpacked into a directory. Documents are represented by the directory content and not by a single file.falsePBSpecifies if the user's name should be written into the Properties dialog of the document when saving the document.trueMBASpecifies whether all modified documents are automatically saved in a time interval.falseMBASpecifies whether to create a backup copy when a modified document is saved.falseMBASpecifies if the document properties dialog will be opened for editing every time a document is saved under a new filename.falseMBAShows a prompt during AutoSave,even when the document has a filename.trueMBASpecifies the AutoSave time interval in minutes.Specifies that the minimum time interval is 1 minute.Specifies that the maximum time interval is 60 minutes.15MBASaves view properties of last active document view when saving a document.trueMBASpecifies if files saved in the OOo 6.0 XML file formats should be in pretty printing format. Saving and loading the document takes more time in pretty printing format.falseMBASpecifies if a warning message is shown if a file is going to be saved to an alien format.trueMAVIf the option is set, every time a user triggers a plain Save operation, SaveAs operation with possible additional user notifications will be started.falsePBIf the value is "true", then the ODF that is saved by OpenOffice.org will be backward compatible to previous minor versions.truePBSpecifies if the printer settings will be loaded with the document.trueMBAContains settings on how graphics contained in a document should be saved.AFSpecifies how graphics contained in a document are saved.NormalCompressedOriginal format1MBASpecifies how URLs in documents should be processed during save.MBASpecifies whether URLs in documents should be saved relative to the file system.trueMBASpecifies if URLs in documents should be saved relative to the Internet.truePBSpecifies ODF settings.PBSpecifies the default ODF version for saving documents.ODFVER_UNKNOWNODFVER_010ODFVER_011ODFVER_012ODFVER_LATEST3MBAContains settings regarding the loading of documents.MBASpecifies whether the user defined configuration settings are loaded together with the document.trueMAVSpecifies whether the office update dialog should be shown in case the loaded document has newer ODF version than the maximal supported one.trueMBAContains security specific Office settings.MBAContains security settings regarding Basic scripts.MBALists all trustworthy URLs: file: All scripts from the local file system including a LAN; private:explorer: Scripts from the Explorer; private:help: Scripts in the help system; private:newmenu: Scripts that are executed by the commands File-New and AutoPilot; private:schedule: Scripts of the scheduler; private:searchfolder: Scripts of the searchfolder; private:user: Scripts that are entered in the URL field.MBADetermines how Office Basic scripts should be handled.NeverAccording to Path ListAlways1MBASpecifies whether execution of plugins found inside a document is allowed.trueMBASpecifies whether a warning box should be displayed before executing a script.falseMBASpecifies whether the user must confirm before a basic script can be executed.trueGTSpecifies wether to warn when saving or sending documents with personal/hidden data.falseGTSpecifies wether to warn when signing documents with personal/hidden data.trueGTSpecifies wether to warn when printing documents with personal/hidden data.falseGTSpecifies wether to warn when creating PDF documents with personal/hidden data.falseGTSpecifies wether to remove personal information on saving.falseGTSpecifies wether to recommend password protection when saving documents.falsePBSpecifies whether ctrl-click is required to follow hyperlinks.trueGTLevel of Macro security.Lowest level.Highest level.2MAVSpecifies whether the macro execution is disabled in general. If it is set to true, the "MacroSecurityLevel" is ignored. If it is set to false, the mentioned entry specified the level of macro security.falseGTList with trusted authors.MBAContains window and dialog settings.PBSpecifies the scaling only of the screen representation [UNIT=%].PBSpecifies the minimum range of the scaling.PBSpecifies the maximum range of the scaling.100CDContains settings to change new document window behavior.CDEvery new document window will be forced to front and grabs the focus.trueMBAContains settings on how the application window should be displayed.MBASpecifies whether the application window should be opened in Fullscreen mode.falseMBASpecifies the preferred view of the application window.Use last settingShow in task barOpen in Fullscreen mode0MBAContains settings which specify how dialogs and toolbars should be displayed.MBASpecifies whether toolbar buttons should be drawn large or small. True means large.falseMBASpecifies whether toolbox buttons should be drawn with a flat or 3D design. True means flat design.truePBDetermines the automatic mouse positioning on dialogs: 0 - Default button 1 - Dialog center 2 - No automatic positioningSnap To ButtonSnap To MiddleNo Snap2OSDetermines the action assigned to the middle mouse button: 0 - No action 1 -Auto scroll 2 - Paste selection.No actionAuto scrollPaste selection1SSAContains localization specific settings.SSASpecifies if shortcuts are assigned automatically.SSASpecifies the percentage for enlarging controls.SSASpecifies the upper limit for enlarging the controls is 100%.SSASpecifies the upper limit for enlarging the controls is 100%.PBContains menu view settings.PBShows all deactivated menu entries. Menu commands that are normally not necessary are hidden by default.trueCMCIndicates whether icons in the office menus should shown/hidden by following the System theme.trueCDIndicates whether icons in the office menus should be displayed.truePBSpecifies automatic selection while moving the mouse over a menu (True).trueMBAContains settings for general windows used by the Office.PBSpecifies the representation of the window while dragging.With window contentsFrame onlyFrom system settings2MBADeprecated.Deprecated.Deprecated.falseDeprecated.ZoomInSmallForceDockAutoHideTaskCantGetFocusDeprecated.MBASpecifies the properties of window containers for docked windows.MBADeprecated.MBADeprecated.MBADeprecated.Stick/HiddenFloating/HiddenStick/VisibleFloating/VisibleDeprecated.Deprecated.Font antialiasing propertiesSpecifies font antialiasing propertiestrueSpecifies an additional limit if Font Antialiasing is enabled. Fonts that are smaller than the specified limit are not anti-aliased.8MBAContains the settings regarding the undo operation in the Office.MBASpecifies how many operations can be undone in a row.Specifies the lowest number of undo steps possible.Specifies the highest number of undo steps possible.100PBSpecifies options related to the setup.Specifies options related to the installed languages.Contains the installed Office languages for the menus and dialogs.AFSpecifies options related to printing.MBASpecifies if printing a document can modify a document due to reformattingfalseOSContains settings for print specific warnings.OSSpecifies if a warning should be displayed in case the printout requires a specific paper sizefalseOSSpecifies if a warning should be displayed in case the printout requires a specific paper orientationfalseOSSpecifies if a warning should be displayed in case the printer defined in the document was not foundfalseAFSpecifies if a warning should be displayed in case the printout contains transparent objects.trueAFSpecifies the options related to printing.Specifies the options related to printing.AFIndicates whether to ignore transparency for the output of objects.falseAFSpecifies type of transparency reduction: 0 - Automatically determine reduction, 1 - Always disabled.0AFIndicates whether to reduce memory usage for output of gradients by limiting the number of gradient steps.falseAFSpecifies type of gradient reduction: 0 - reduce the number of stripes, 1 - reduce to color.0AFSpecifies the maximum number stripes used for output of gradients.64AFIndicates whether to reduce the memory usage of bitmaps for print process by limiting the resolution.falseAFSpecifies type of bitmap reduction: 0 - Automatically determine optimal resolution, 1 - Use original resolution, 2 - User defined resolution.1AFSpecifies resolution of reduced bitmaps: 0 - 72DPI, 1 - 96DPI, 2 - 150DPI, 3 - 200DPI, 4 - 300DPI, 5 - 600DPI.3AFIndicates whether to reduce the resolution of automatically created substitution bitmaps of transparent objects.trueAFIndicates whether to create only grayscale output of all objects.falseSpecifies the options for printing to a file.AFIndicates whether to ignore transparency for the output of objects.falseAFIndicates the type of transparency reduction: 0 - Automatically determine reduction, 1 - Always disabled.0AFIndicates whether to reduce memory usage for output of gradients by limiting the number of gradient steps.falseAFIndicates the type of gradient reduction: 0 - Reduce the number of stripes, 1 - Reduce to color.0AFSpecifies the maximum number stripes used for output of gradients.64AFIndicates whether to reduce the memory usage of bitmaps for the print process by limiting the resolution.falseAFSpecifies the type of bitmap reduction: 0 - Automatically determine optimal resolution, 1 - Use original resolution, 2 - User defined resolution.1AFSpecifies the resolution of reduced bitmaps: 0 - 72DPI, 1 - 96DPI, 2 - 150DPI, 3 - 200DPI, 4 - 300DPI, 5 - 600DPI.3AFIndicates whether to reduce the resolution of automatically created substitution bitmaps of transparent objects.trueAFIndicates whether to create only grayscale output of all objects.falseMBALists open documents or windows.MBALists open documents or windows.OSContains settings specifying if a XML package is added to the applications binary files.OSDefines if a XML package is added to the Writer binary files.OSDefines if a XML package is added to the Calc binary files.OSDefines if a XML package is added to the Impress binary files.OSDefines if a XML package is added to the Draw binary files.FSContains settings that specify the common help settings.ABIDetermines wether basic help should be shown.trueABIDetermines the locale for the help pages.ABIDetermines the operating system on which the help system is displayed.MBAActivates the Tip help.trueMBAActivates the Extended help.falseABISpecifies the name of the stylesheet used to display help content.DefaultMBASpecifies the properties of the HelpAgent.Specifies whether the HelpAgent is enabled.trueSpecifies the time-out value in seconds after which the HelpAgent is closed automatically if ignored by the user.30Specifies how often the user must ignore a given HelpAgent topic until it is disregarded in the future (any requests for this topic will be dropped silently).3Contains the help URLs which have been ignored at least once by the user, together with a counter of how often they have been ignored.PLContains settings for the start center.Contains a string specifying the URL to be browsed for additional features (e.g. extensions)Contains a string specifying the URL to be browsed for information about the productContains a string specifying the URL to be browsed for additional template documentsContains a number deciding the layout style of the start center0FSContains various settings regarding the product registration feature.Contains a string specifying the URL with placeholders to be used for online registration.Contains a string specifying the real URL to be used for online registration.Contains a string representation of the date on which the user receives a reminder (e.g. "13.02.2002").Contains the number used internally to determine when the dialog should be started.1Contains a Boolean that specifies if the "Registration..." menu item is available.trueCD/OBRCurrent product ID.This data is saved in a dedicated file since OOo 3.0 FCSCD/OBRSpecifies product specific IDs and associated instance UUIDsThis data is saved in a dedicated file since OOo 3.0 FCSJLContains Java related settings.Contains Applet related settings.Enables/disables Java applets in Office documents.falseAFSpecifies the options related to the vectorization of bitmaps.AFSpecifies the number of colors that are used to create a vector graphic in Draw/Impress [UNIT=count].Specifies that the lowest number that can be used to create a vector graphic is 8.Specifies that the lowest number that can be used to create a vector graphic is 32.8AFSpecifies the number of pixels that you want to combine as a single pixel when creating a vector graphic.Specifies the minimum value to reduce point is 0 pixels.Specifies the maximum value to reduce point is 32 pixels.0AFIndicates whether to create a tiled background before vectorizing.falseAFSpecifies the extent of background tiles that are used for vectorizing [UNIT=pixel].Specifies that the minimum extent is 8 pixels.Specifies that the maximum extent is 128 pixels.32AFSpecifies the options for images.Specifies the color options for images.AFDeprecated.Deprecated.Deprecated.256AFDeprecated.Deprecated.Deprecated.16AFDeprecated.Deprecated.Deprecated.10AFDeprecated.Deprecated.Deprecated.10AFDeprecated.Deprecated.Deprecated.4500AFDeprecated.trueAFDeprecated.Deprecated.Deprecated.50Specifies the RGB color options for images.AFDeprecated.Deprecated.Deprecated.10AFDeprecated.Deprecated.Deprecated.10AFDeprecated.Deprecated.Deprecated.10Specifies the effects options for images.AFDeprecated.Deprecated.Deprecated.4AFDeprecated.Deprecated.Deprecated.4AFDeprecated.DeprecatedDeprecatedDeprecatedDeprecated2AFDeprecated.Deprecated.Deprecated.10AFDeprecated.falseAFDeprecated.Deprecated.Deprecated.4AFDeprecated.Deprecated.Deprecated.4AFDeprecated.DeprecatedDeprecatedDeprecatedDeprecated2AFDeprecated.Specifies that the minimum intensity is 0.Specifies that the maximum intensity is 100.10NNSpecifies settings for the date formats used.NNSpecifies the first year that can be entered using two-digit-year date formats.1930SJ / OS / KASpecifies default settings of Microsoft-, Graphic- and HTML filters.SJSpecifies default settings of Microsoft filters.Specifies default settings of Microsoft import filters.Specifies if convertible MathType OLE objects are converted into Math objects.trueSpecifies if convertible WinWord OLE objects are converted into Writer objects.trueSpecifies if convertible Excel OLE objects are converted into Calc objects.trueSpecifies if convertible PowerPoint OLE objects are converted into Impress objects.trueFlag to control use of enhanced fields.trueSpecifies default settings of Microsoft export filters.Specifies if embedded Math objects are converted into MathType objects.trueSpecifies if embedded Writer objects are converted into WinWord objects.trueSpecifies if embedded Calc objects are converted into Excel objects.trueSpecifies if embedded Impress objects are converted into PowerPoint objects.trueSJSpecifies if previews are created when saving PowerPoint documents.trueSJSpecifies if previews are created when saving Excel documents.falseSJSpecifies if previews are created when saving Word documents.falseSJSpecifies default settings of graphic import and export dialogs.Specifies default settings of graphic import dialogs.Specifies default settings of the PCD - Photo CD Base import dialog.Specifies import resolution of PCD graphics.PCD-Base16, 192*128 PCD graphic.PCD-Base4, 384*256 PCD graphic.PCD-Base, 768*512 PCD graphic.2Specifies default settings of graphic export dialogs.Specifies the unit default that is used in the the graphic export dialog if exporting pixel graphics.inchescmmmpointspicapixelsdefault (depends to the metric settings in tools/options)-1Specifies the unit default for the resolution that is used in the the graphic export dialog if exporting pixel graphics.pixels/inchpixels/cmpixels/meter0Specifies the logical width of a graphic. [UNIT=1/100 mm].Represents the lowest value that can be entered in the dialog.96Specifies the maximum raw graphic size in bytes up to which the realtime preview is enabled, for fast computers this value may be enlarged4000000Specifies the unit default that is used in the the graphic export dialog if exporting vector graphics.inchescmmmpointspicadefault (depends to the metric settings in tools/options)-1Specifies default settings of the Windows Bitmap export dialog.Specifies the number of colors that are to be used for the export.Original1 bit, 1 bit threshold1 bit, 1 bit dithered4 bit, 4 bit grayscale4 bit, 4 bit color palette8 bit, 8 bit grayscale color8 bit, 8 bit color palette24 bit, 24 bit true color0Specifies if Run-Length-Encoding should be used in the export.trueSpecifies default settings of the EPS - Encapsulated Postscript export dialog.Specifies if a preview graphic should be exported together with the Encapsulated PostScript file. Due to the fact that most programs can't render eps graphics, it is useful to provide a preview that can be displayed as replacement. The preview graphic will also be printed if the printer is not capable of Postscript.NoneTIFFInterchange (EPSI) - 1 bit color resolutionTIFF and EPSI0Specifies the PostScript version that has to be used for the EPS export. Because not every PostScript printer is capable of version 2 PostScript, it is sometimes necessary to create version 1 PostScript graphics. PostScript Level 1 does not support color and bitmap compression.Version 1 PostScriptVersion 2 PostScript2Specifies if color or grayscale format is used for the EPS export. This option is not available for version 1 PostScript files.Color formatGrayscale format2Specifies if bitmaps are exported by using the LZW (Lempel - Ziv - Welch) compression algorithm. Compression is only available for level 2 PostScript files.LZW compressionNo compression2Specifies if glyph outlines are exported. They produce the highest quality and it is the only possible way to create EPS files that are CJK compliant. Not using glyphs will produce smaller files, but it might lead to problems if not all fonts are available during printing.Glyph outlinesNo glyph outlines0Specifies default settings of the GIF - Graphics Interchange export dialog.Specifies if graphics should be exported using interlace. It is recommended for big pictures to activate interlace, so the content can be displayed immediately when loading the picture.DeactivateActivate1Specifies if the graphic background is stored as transparent.No transparencyTransparency1Specifies default settings of the JPEG - Joint Photographic Experts Group export dialog.Specifies quality of the JPG export. A higher value results in higher quality and file size.Represents lowest value that can be used. The lower the value, the less good is the compression quality and the bigger is be the file size.Represents highest value that can be used. The higher the value, the better is the compression quality and the smaller is the file size.75Specifies if graphics are exported using true color or grayscale.True colorsGrayscale0Specifies default settings of the PBM - Portable Bitmap export dialog.Specifies if graphics are exported to binary- or ASCII format.BinaryASCII1Specifies default settings of the PGM - Portable Graymap export dialog.Specifies if graphics are exported to a binary- or ASCII format.BinaryASCII1Specifies default settings of the PPM - Portable Pixelmap export dialog.Specifies if graphics are exported to a binary- or ASCII format.BinaryASCII1Specifies default settings of the PNG - Portable Network Graphic export dialog.Specifies export compression settings which ranges from 0 (no compression) to 9 (maximum compression). The calculating time increases with an ascending compression value.Represents lowest value that can be used. The lower the value, the lower the compression quality and the larger the file size.Represents the highest value that can be used. The higher the value, the higher the compression quality and the smaller the file size.6Specifies if graphics should be exported using interlace. It is recommended for big pictures to activate interlace, so the content can be displayed immediately when loading the picture.Deactivate interlace modeActivate interlace mode1OSContains settings for HTML import/export.Contains settings for HTML import.ERSpecifies if numbers should be parsed according to the en-US locale instead of the user's locale.falseOSSpecifies if unknown tags should be imported as fields.falseOSSpecifies if font settings should be ignored when importing.falseSpecifies font size for HTML.OSSpecifies font size for HTML as Token Font 1.7OSSpecifies font size for HTML as Token Font 2.10OSSpecifies font size for HTML as Token Font 3.12OSSpecifies font size for HTML as Token Font 4.14OSSpecifies font size for HTML as Token Font 5.18OSSpecifies font size for HTML as Token Font 6.24OSSpecifies font size for HTML as Token Font 7.36Contains settings for HTML export.OSSpecifies the browser for which the HTML export should be optimizedHtml 3.2MSIE 4.0Netscape 3.0WriterNetscape 4.04OSSpecifies if Office Basic instructions are considered when exporting in HTML format.falseOSSpecifies if the print layout of the current document should also be exported.falseOSSpecifies if graphics are copied to the Internet server when uploading via FTP.trueOSSpecifies if a warning should be displayed to point out that the available Basic macros will be lost when exporting in HTML format.trueOSSpecifies the mimetype for the text encoding.KASpecifies default settings of PDF export dialog.Specifies default settings of PDF export dialog.Use following properties instead: UseLosslessCompression, Quality, UseResolutionReduction, ResolutionReductionSJDeprecated.1SJSpecifies if graphics are exported to PDF using a lossless compression eg. PNG or if they are compressed using the JPEG format.falseSJSpecifies quality of the JPG export. A higher value results in higher quality and file size.Represents lowest value that can be used. The lower the value, the less good is the compression quality and the bigger is be the file size.Represents highest value that can be used. The higher the value, the better is the compression quality and the smaller is the file size.90SJSpecifies if the resolution of each image is reduced to the resolution specified by the property MaxImageResolution.falseIf the property ReduceImageResolution is set to true all images will be reduced to the given value in DPI.751503006001200300SJDetermines if PDF are created by using special tags also known as Tagged PDF.falseSJSpecifies if notes are exported to PDF.falsePLSpecifies if bookmarks are exported to PDF.truePLSpecifies how many bookmark levels should be opened in the reader application when the PDF gets opened.-1SJSpecifies if notes pages are exported to PDF. (Notes pages are available in Impress documents only).falseSJSpecifies slide transitions are exported to PDF. This option is active only if storing Impress documents.trueplSpecifies whether form fields are exported as widgets or only their fixed print representation is exported.trueplSpecifies whether to embed the 14 standard PDF fonts or not.falseSpecifies the submitted format of a PDF form.Specifies that forms type FDF is used.Specifies that forms type PDF is used.Specifies that forms type HTML is used.Specifies that forms type XML is used.0plSpecifies whether multiple form fields exported are allowed to have the same field name.falseFMESpecifies that automatically inserted empty pages are suppressed. This option is active only if storing Writer documents.truePLSpecifies that a stream is inserted to the PDF file which contains the original document for archiving purposes.falsebeppec56Specifies whether to hide the PDF viewer menubar when the document is active.falsebeppec56Specifies whether to hide the PDF viewer toolbar when the document is active.falsebeppec56Specifies whether to hide the PDF viewer controls when the document is active.falsebeppec56Specifies that the PDF viewer window is opened full screen when the document is opened.falsebeppec56Specifies that the PDF viewer window is centered to the screen when the PDF document is opened.falsebeppec56Specifies that the PDF viewer window is opened full screen, on top of all windows..falsebeppec56Specifies that the title of the document, if present in the document properties, is displayed in the PDF viewer window title bar.truebeppec56Specifies how the PDF document should be displayed when opened.Select the default viewer mode, neither outlines or thumbnails.The document is opened with outline pane openedThe document is opened with thumbnail pane opened0beppec56Specifies the action to be performed when the PDF document is opened.Opens with default zoom magnification.Opens magnified to fit the entire page within the window.Opens magnified to fit the entire page width within the window.Opens magnified to fit the entire width of its boundig box within the window (cuts out margins).Opens with the zoom level specified in the Zoom property.0plspecifies the zoom level a PDF document is opened with. Only valid if "Magnification" is set to "4".100plSpecifies the page on which a PDF document should be opened in the viewer application.1beppec56Specifies the page layout to be used when the document is opened.Display the pages according to the reader configuration.Display one page at a time.Display the pages in one column.Display the pages in two columns odd pages on the right, to have the odd pages on the left the FirstPageOnLeft property should be used as well.0beppec56Used with the value 3 of the PageLayout property above, true if the first page (odd) should be on the left side of the screen.falsebeppec56Specifies what printing is allowed.The document cannot be printed.The document can be printed at low resolution only.The document can be printed at maximum resolution.2beppec56Specifies the change allowed to the document.The document cannot be changed.Inserting deleting and rotating pages is allowed.Filling of form field is allowed.Both filling of form field and commenting is allowed.All the changes of the previous selections are permitted, with the only exclusion of page extraction (copy).4beppec56Specifies that the pages and the document content can be extracted to be used in other documents (copy and paste).truebeppec56Specifies that the document content can be extracted to be used in accessibility applications.truebeppec56Specifies the version of PDF to emit.PDF 1.4 (default selection).PDF/A-1 (ISO 19005-1:2005)0beppec56Specifies that the file system related hyperlinks (file:// protocol) present in the document will be exported as relative to the source document location.falsebeppec56Specifies the way the exported PDF will be viewed (experienced) by the user.Specifies that the PDF will be exported with all the links external to the document treated as URI. This is the DefaultSpecifies that the PDF will be exported in order to be viewed through a PDF reader application only. Valid only if not exporting to PDF/A-1 (e.g. SelectPdfVersion not set to 1).Specifies that the PDF will be exported in order to be viewed through an Internet browser, using the PDF plug-in provided with it. The bookmark of the URI will be rendered compatible with the target bookmark generated with OOo PDF Export feature (see ExportBookmarksToPDFDestination, below).0beppec56Specifies that the target documents with .od[tpgs] extension, will have that extension changed to .pdf when the link is exported to PDF. The source document remains untouched.falsebeppec56Specifies that the bookmarks contained in the source OpenOffice.org file should be exported to the PDF file as Named Destination (see PDF 1.4 section 8.2.1).falseMBADetermines the miscellaneous entries for the common group.ASDetermines the maximum count of documents, which are allowed to be open at the same time. NIL will be interpreted as infinite!PBEnables/Disables Plugins.trueFSDetermines if the system's file and folder pickers should be used. If false, the proprietary file/folder picker implementations will be used. Relevant on platforms where file/folder picker integration is implemented.trueMAVAllows to specify whether the OOo document file locking mechanics should use the system file locking.trueMAVAllows to specify whether the OOo document file locking mechanics should use the lock file for locking.trueTHBDetermines if a warning dialog should be
displayed when a user checks the link checkbox in
the insert graphics dialog.truePLDetermines if the system's print dialog should be used. If false, the platform independent print dialog implementation will be used. Relevant on platforms where print dialog integration is implemented.falsetmlDetermines whether to show the document creation and selection of the machine's default ODMA (Open Document Management Architecture) DMS (Document Management System). If true, and the machine has a DMS available, the DMS's dialog will be displayed. That dialog then gives the opportunity to use the application's dialog instead, which means the normal system file and folder pickers will be displayed. Relevant only on Windows.falseRSiddharthaDisables the customization of the UI elements.falsekoheiDetermines if the user can save the document even when it's not modified.falsemmeeksDetermins if various experimental, and potentially unstable features should be enabled in the user interface.falseMBASpecifies which size of the symbols is used for the toolbars.16x16 pixel iconslarger icons2kendySpecifies which style of the symbols is used for the toolbars, menus, etc.Automatic, chosen according to the desktopDefault - the OpenOffice.org default themeHiContrastIndustrialCrystal - the KDE default themeTango - the Gnome default themeClassic - the OpenOffice.org 2.0 default themeHuman - the Gnome default theme for UbuntuautoMBASpecifies which button style the toolbars should use.3D styleFlat style1FSEnables/Disables the usage of AutoPilots for form controls.trueMBASpecifies if the office has never before been started.trueFScontains settings for the form layer of the applications.specifies certain default layout settings for form controls. All those settings can be overruled in concrete documents, they specify creation-time defaults only.specifies certain default layout settings for form controls in text documentsspecifies certain default layout settings for form controls in web pagesspecifies certain default layout settings for form controls in spreadsheet documentsspecifies certain default layout settings for form controls in drawing documentsspecifies certain default layout settings for form controls in presentation documentsspecifies certain default layout settings for form controls in XML form documentsspecifies certain default layout settings for form controls in database form documentsspecifies certain default layout settings for form controls in database text report documents.specifies settings for the property browser used for forms and form controls.FSEnables or disables the property browser's access to form/control properties which are not officially supported.falseFSEnables or disables a help section at the bottom of the property browser, which shows the help of the currently active property.falseOSContains layout specific settings for Asian languages.OSDetermines the kerning of western text and/or punctuation inside of Asian text.trueOSDetermines the type of character distance compression in Asian text: 0 - no compression; 1 - compress punctuation only; 2 - compress interpunction an japanese kana.0OSContains the characters at which lines are not allowed to begin or to end. For each locale there is a separate entry with the locale as its node name.OS / PBContains all options for search.PBSpecifies search for whole words only.falsePBSpecifies search backwards.falsePBSpecifies search with the use of regular expressions.falsePBSpecifies search for styles only.falsePBSpecifies search with similarity.falsePBSpecifies search as case sensitive.falsePBSpecifies search with the use of Asian options.falseOSSpecifies the divider label in case of a component-based search extension.OSSpecifies the label of the first component-based search command.OSSpecifies the label of the second component-based search command.modSpecifies if search includes comments(SwPostItFields)falseOSContains search options for the Japanese language.OSDoes not distinguish between full-width and half-width characters.trueOSDoes not distinguish between hiragana and katakana characters.trueOSSpecifies search without distinguishing between characters with diphthongs and double consonants and plain characters.trueOSSpecifies search without distinguishing between minus signs, dashes, and long vowel sounds.trueOSSpecifies search without distinguishing between repeat character marks.trueOSSpecifies search without distinguishing between standard and nonstandard ideography.trueOSSpecifies search without distinguishing between standard and nonstandard ideography.trueOSSpecifies search without distinguishing between 'Di' and 'Zi' or 'Du' and 'Zu'.trueOSSpecifies search without distinguishing between 'Ba' and 'Va' or 'Ha' and 'Fa'.trueOSSpecifies search without distinguishing between 'Tsi', 'Thi' and 'Chi' or 'Dhi' and 'Zi'.trueOSSpecifies search without distinguishing between 'Hyu' and 'Fyu' or 'Byu' and 'Vyu'.trueOSSpecifies search without distinguishing between 'Se' and 'She' or 'Ze' and 'Je'.trueOSSpecifies search without distinguishing between 'Ia' and 'Iya'.trueOSSpecifies search without distinguishing between 'Ki' and 'Ku'.trueOSSpecifies search without distinguishing between punctuation characters.trueOSSpecifies search without distinguishing between characters used as blank spaces, such as full-width spaces, half-width spaces, and tabs.trueOSSpecifies search without distinguishing between prolonged sound marks.trueOSSpecifies search without distinguishing between normal dots and middle dots.trueOSSpecifies settings for the accessibility options.FSEnables the automatic detection of a high contrast mode set for your desktop. Some OS' do not provide this option explicitly, but allow the user to choose a color scheme that is HC-compliant implicitly, which is recognized if the option is set.trueOSEnables the use of high contrast colors, instead of displaying the normal/original WYSIWYG colors.trueOSEnables or disables the automatic time out of help tips. You can specify a duration (n) of 1 to 99 seconds. If this option is disabled, press the Esc key to dismiss the help tip.trueOSEnables or disables the automatic time out of help tips. You can specify a duration (n) of 1 to 99 seconds. If this option is disabled, press the Esc key to dismiss the help tip.Specifies the number of seconds to wait before displaying a help tip.Specifies the number of seconds to display a help tip.4AFIndicates whether to allow the graphical animation in all SO/OO applications (i.e. animated GIFs and objects in Impress during presentation, animated graphical previews (Gallery, Insert-Graphics-From File, Animation Tool in Impress.)trueAFIndicates whether to allow all textual animation like blinking and scrolling in all SO/OO applications.trueOSOverrides all text color attributes set in a SO/OO document for display only.falseOSAllows the user to change the UI font to the system default.trueOSIndicates whether the cursor is displayed in read-only texts.falseReplaced by org.openoffice.Office.Embedding/ObjectNames.MAVDeprecatedWithout replacement.OBRSpecifies external helper applications / protocol handlers.OBRSpecifies an external mail application to be used for Send as email.Without replacement.Indicates if the mail application in the OS specific user settings should be used.Specifies the external mail application to be used.Without replacement.Specifies the default external mail application.Mozilla 1.0 - 1.2Without replacement.Contains a set of supported command line profiles.OSContains various language/localization specific settings.PLContains settings for (language/localization specific) input methods.Controls the behavior of the IIIMP status window on Unix. If true, the status window is always displayed. If false, the status window is never displayed. If nil (the default), the status window is displayed depending on the current locale.Contains settings for the Asian languages (Chinese, Japanese, Korean,...) layout.Specifies, whether CJK font settings are available (true) or not (false).falseSpecifies, whether vertical text is available (true) or not (false).falseSpecifies, whether Asian typography options like compression and forbidden characters are available (true) or not (false).falseSpecifies, whether Japanese find options are selectable for search and replace (true) or not (false).falseSpecifies whether Rubys are available (true) or not (false).falseSpecifies whether case mapping to half and full width, hiragana and katagana are available (true) or not (false).falseSpecifies whether writing in double lines is available (true) or not (false).falseSpecifies whether emphasis marks are available (true) or not (false).falseSpecifies whether vertical call out objects are available (true) or not (false).falseContains settings for the languages with complex text layout (Hebrew, Arabic, Thai,...).Specifies whether CTL font settings are available (true) or not (false).falseSpecifies whether CTL strings are checked for the correct input sequence(true) or not (false).falseSpecifies whether CTL strings are checked restricted for the correct input sequence(true) or not (false). Is only effective when CTLSequenceChecking is true.falseSpecifies whether CTL input sequences are corrected while typing. Is only effective when CTLSequenceChecking is true.falseSpecifies the type of text cursor movement (logical (0) or visual (1)) within mixed text (RTL and LTR).0Specifies the type of numerals (Arabic (0), Hindi (1), system settings (2) or Context(3)) is used per default in all applications.0SSA Specifies whether the whole user interface (UI) will be mirrored. If true, the UI will be right-to-left. If false, the UI will be left-to-right. If nil (the default), the UI will be mirrored depending on the office locale. Use cfg package Jobs instead of this.ASUses cfg package Jobs instead of this component.Use cfg package Jobs instead of this.Uses cfg package Jobs instead of this component.Use cfg package Jobs instead of this.Uses cfg package Jobs instead of this component.FMEContains settings for smart tags.FMEContains Writer specific settings for smart tags.FMESpecifies whether smart tag recognization is enabled.trueFMEA list of excluded smart tag types.