Contains common settings which are potentially shared by other components. MAV Contains a container for passwords. Contains a password encoded with the master password. AS Contains settings for a history entry in the history list. Specifies the document URL. Specifies the filter name that was chosen to load the document. Indicates the title of the URL that is displayed on the user-interface. Contains an encoded password used to open the document. AS Describes a menu entry for configurable office menus (e.g. file new). Specifies the URL for dispatch. Specifies the label of a menu entry. Specifies the identifier of an assigned icon. Specifies the dispatch target (for example, _blank to open URL in new frame). PB Contains the width and height of the dialog size. Contains the height of the dialog [UNIT=pixel]. Contains the width of the dialog [UNIT=pixel]. OJ Describes the characteristics of a font. Specifies the exact name of the font ("Arial","Courier", "Frutiger"). Specifies the height of the font in the measure of the destination. Specifies the width of the font in the measure of the destination. Specifies the style name of the font ("Bold", "Italic", "Italic Bold"). Specifies the general style of the font. DONTKNOW DECORATIVE MODERN ROMAN SCRIPT SWISS SYSTEM DONTKNOW Specifies the character set which is supported by the font. DONTKNOW ANSI MAC IBMPC_437 IBMPC_850 IBMPC_860 IBMPC_861 IBMPC_863 IBMPC_865 SYSTEM SYMBOL Specifies the pitch of the font. DONTKNOW FIXED VARIABLE Specifies the character width. Depending on the specified width, a font that supports this width may be selected. [UNIT=%]. Specifies the thickness of the line. Specifies if there is a character slant (italic). NONE OBLIQUE ITALIC DONTKNOW REVERSE_OBLIQUE REVERSE_ITALIC Specifies the type of underline. NONE SINGLE DOUBLE DOTTED DONTKNOW DASH LONGDASH DASHDOT DASHDOTDOT SMALLWAVE WAVE DOUBLEWAVE BOLD BOLDDOTTED BOLDDASH BOLDLONGDASH BOLDDASHDOT BOLDDASHDOTDOT BOLDWAVE Specifies the type of strikeout. NONE SINGLE DOUBLE DONTKNOW BOLD SLASH X Specifies the rotation of the font. [UNIT=degree]. Specifies if a kerning table is available (for requesting). For selecting, specifies if the kerning table is to be used. Specifies if only words get underlined. Specifies the technology of the font representation. DONTKNOW RASTER DEVICE SCALABLE OS Contains settings for the font replacement. Contains the name of font that is to be replaced. Contains the name of the replacing font. Determines if the font pair replacement is applied on the screen. false Determines if the font pair replacement is applied on the printer. false Use LogicalGraphicSize instead of this. SJ Specifies the size of a graphic. [UNIT=1/100 mm]. Specifies the width of graphic. [UNIT=1/100 mm]. Represents the highest value that can be entered in the dialog. Represents the lowest value that can be entered in the dialog. 10000 Specifies the height of graphic. [UNIT=1/100 mm]. Represents the lowest value that can be entered in the dialog. Represents the highest value that can be entered in the dialog. 10000 SJ Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies the logical width of a graphic. [UNIT=1/100 mm]. Represents the lowest value that can be entered in the dialog. Represents the highest value that can be entered in the dialog. 10000 Specifies the logical height of graphic. [UNIT=1/100 mm]. Represents the lowest value that can be entered in the dialog. Represents the highest value that can be entered in the dialog. 10000 Replaced by org.openoffice.Office.Embedding/ObjectName. MAV Deprecated MAV Deprecated MAV Deprecated AS Specifies an entry of the recovery list which is then used by CrashGuard to save information about the last opened files. Specifies an URL that should be recovered after the next Office start. Specifies a filter that should be used to open the document referenced by the URL property. Contains the name of the temporary file which represents the document. OS Contains the characters (so called forbidden characters) that are not allowed at the beginning or end of a line. Contains the characters that are not allowed at the beginning of a line. Contains the characters that are not allowed at the end of a line. MBA Stores an association between a numeric value and a name. Specifies a name that is associated with a counter. Specifies a number that is associated with a name. Without replacement. OBR Contains the command line profile for external mail applications. Contains the different string tokens for "to" and "cc" etc. Addresses will be concatenated to create the command line. Contains the fixed text (optional) preceding the mail arguments. Contains the string token describing the "from" address field. Contains the string token describing the "to" address field. Contains the string token describing the "cc" address field. Contains the string token describing the "bcc" address field. Contains the string token describing the subject. Contains the string token describing the attachments of the message. Contains the string token describing the body of the message. Contains the delimiters used to separate values for various command line parameters of the external mailer. Contains the delimiter used between the external mailer name and the "to" field. Contains the delimiters between different cc addressees. Contains the delimiters between different bcc addressees. Contains the delimiters between different attachments. Use cfg package Jobs instead of this. AS Use cfg package Jobs instead of this. Use cfg package Jobs instead of this. Use cfg package Jobs instead of this. Use cfg package Jobs instead of this. Use cfg package Jobs instead of this. GT All Certificate informations needed to handle and identify the signature. Subject name of Certificate. Serial Number of Certificate. Raw of Certificate. FS specifies, on a per-application-type basis, certain defaults for layouting form controls specifies the default visual effect for form controls specifies no special visual effect specifies a flat appearance specifies a 3D appearance specifies whether the controls should use dynamic border coloring, if possible. Dymamic border coloring means that when the mouse is hovered over a control, and when a control receives the focus, this is indicated with special border colors. false controls whether form controls, when they render their text, use the same metrics as the document does. If this is set to <true>, then the control text's appearance better matches the text in the surrounding document.</p> <p>Technically, documents use a reference device for formatting, which usually has a higher resolution than the actual output device. The option decides whether form controls should use the same reference device as the surrounding document. However, some of OOo's document implementations do not properly use their reference device in all situations, in which case the option might better be disabled.<p> true Stores registration data which is related to a specific product version. An instance UUID associated with the product version ID. MAV Contains internal MSExport settings that are common for all apps. Specifies if an old ( 5.0 format )way instead of a new one ( 6.0 OLE embedded document ) should be used for export of inplace objects in case MS-filters are not used for them. false MAV Contains a description of the persistent password container. Specifies if passwords can be stored persistently. false Specifies if there is a valid master password. false Contains the master password encrypted by itself. Contains a list of passwords encoded with the master password. KSO Contains a list of URLs that should be accessed using system credentials of the user. AW Specifies settings for the 3D engine. AW Specifies if dithering is used to display more colors with few colors available. Use Dithering true AW Specifies if 3D graphics from Draw and Impress will be displayed on the user's system using an OpenGL capable hardware. If the system does not have an OpenGL capable hardware, this setting will be ignored. The 3D display is always done per software. Use OpenGL false AW Specifies whether all geometry data will be simultaneously transferred in an array to the graphic driver. Not every graphic driver correctly supports this OpenGL capability. For this reason, this option can be deactivated in case of presentation errors of 3D output. All geometry data will be then transferred as single components. This option is only available if OpenGL is used, otherwise it is disabled. Optimized output true AW Specifies interaction with full display. If a 3-D object is rotated or moved, the full display is rotated or moved and not a grid frame. Object refresh during interaction false CD Contains settings related to dictionaries. CD Specifies a repository URL where users can download additional dictionaries. AW Specifies settings for the Drawinglayer. AW Specifies if the Overlay pane is allowed to use an own buffer. If on, Overlay is fast but a buffer (graphics memory) is used. If off, Overlay is slow, but no Buffer is needed. This is the global switch which will enable/disable overlay for all Applications. This is the global switch for the whole office. Overlay is allowed to use a Background Buffer in all Applications true AW Similar to OverlayBuffer, but only for Calc Application Calc Overlay is allowed to use a Background Buffer true AW Similar to OverlayBuffer, but only for Writer Application Writer Overlay is allowed to use a Background Buffer true AW Similar to OverlayBuffer, but only for Draw/Impress Applications Draw/Impress Overlay is allowed to use a Background Buffer true AW Specifies if the Application Repaint shall use a buffer for Pre-Rendering. If on, screen flicker is greatly reduced and remote display is fast, but a buffer (graphics memory) is needed. If off, screen flicker will occurr and remote display is slow, but no buffer is needed. This is the global switch for the whole office. Application Repaint is allowed to use Pre-Rendering Buffer. true AW Similar to PaintBuffer, but only for Calc Application. PaintBuffer is the global switch. Calc Repaint is allowed to use Pre-Rendering Buffer true AW Similar to PaintBuffer, but only for Writer Application. PaintBuffer is the global switch. Writer Repaint is allowed to use Pre-Rendering Buffer true AW Similar to PaintBuffer, but only for Draw/Impress Applications. PaintBuffer is the global switch. Draw/Impress Repaint is allowed to use Pre-Rendering Buffer true AW Specifies the first one of two colors used from overlay to display striped lines as helplines. Default is black. Use given color as first stripe color 0 AW Specifies the second one of two colors used from overlay to display striped lines as helplines. Default is white. Use given color as second stripe color 16777215 AW Specifies the length in pixels of a single stripe used from overlay to display striped lines as helplines. Default is four. Use given length as stripe length 4 AW Specifies the maximum allowed Paper Width for page definitions in cm. Default is 3m, i.e. 300 cm. When this is changed to higher values, it is done on own risk. Maximum allowed Paper Width for page definitions 300 AW Specifies the maximum allowed Paper Height for page definitions in cm. Default is 3m, i.e. 300 cm. When this is changed to higher values, it is done on own risk. Maximum allowed Paper Height for page definitions 300 AW Specifies the maximum allowed Left Margin for the page definitions in 1/100th cm. Maximum allowed Left margin for page definitions 9999 AW Specifies the maximum allowed Right Margin for the page definitions in 1/100th cm. Maximum allowed Right margin for page definitions 9999 AW Specifies the maximum allowed Top Margin for the page definitions in 1/100th cm. Maximum allowed Top margin for page definitions 9999 AW Specifies the maximum allowed Bottom Margin for the page definitions in 1/100th cm. Maximum allowed Bottom margin for page definitions 9999 AW This switch allows to switch DrawingLayer based views to be rendered using AntiAliasing or not. Of course this takes only effect when AntiAliasing is supported for the System OOo is running on. This switch determines if DrawingLayer based views use AntiAliasing. true AW This switch allows to enhance visualisation of graphics which use Horizontal or Vertical Hairlines combined with AntiAliased mode (e.g. in 2D charts). When not used, those lines will be AntiAliased as everything else. Since this is not pleasing for the eye, this option allows to force those lines to snap to discrete points (pixels) when activated and thus avoids AntiAliasing of pure Horizontal or Vertical Hairlines. Determines if Horizontal and Vertical HairLines in AntiAliased mode are snapped to discrete pixles to enhance visualisation true AW This switch determines if the decorations of decorated text portions (e.g. underline, strike through) are rendered using VCL direct rendering or if the primitive is decomposed into simple text and the corresponding geometrical representations of the decorations. Default is true since VCL's usage of the diverse System's hinting possibilities for decorations is useful. Determines if decorated texts are decomposed at render time or directly rendered using VCL true AW This switch determines if simple text is directly rendered using VCL or not. If not, the simple text is decomposed into PolyPolygons which will be painted then. Default is true, since VCL will use the hinting for font rendering on the diverse supported systems, which gives better quality than rendering the text as Polygons. Determines if simple texts are decomposed at render time or directly rendered using VCL true AW This switch decides if Interactions in the DrawingLayer are visualized using Wireframe or Full-Object previews. If false, only Wireframe will be used. If true, Full-Object preview which gives a much better feedback about the object interaction will be used. This mode is used for modification and creation of objects. During interaction, a geometric copy of the object(s) is shown with 50% transparence in the foreground. That copy shows exactly what You will get when You end the interaction. This switch determines if DrawingLayer Interactions show Wireframe or Full-Object preview. true AW This defines a Limitation for the default raster conversion from 3D Scenes to Bitmaps. The number is the maximum number of pixels to use, e.g. 1000x1000 Pixels is allowed as default. When Scenes would need more Pixels than this, the Bitmap will be limited and scaled to the needed pixel size at paint time. A Pixel limitation for the creation of 3D Scenes with the default renderer. 1000000 AW This defines a Limitation for the default raster conversion of FormControls in edit mode. These have the ability to be displayed using this fallback to Bitmaps. The number is the maximum number of pixels to use, e.g. 300x150 Pixels is allowed as default. When FormControls would need more Pixels than this, the Bitmap will be limited and scaled to the needed pixel size at paint time. A Pixel limitation for the creation of FormControl fallback display. 45000 AW This switch defines if the selections in the applications (text or cells) are visualized using inverse (XOR) when set to false (the old selection method, also used when in HighContrast mode) or a transparent overlay selection using the system's selection color. This switch defines if for text/cell selections the old inverse or the new transparent selection is to be used. true AW Specifies the degree of transparence to be used when transparent selection is used. The value is a percent value. Since neither no transparence nor complete transparence makes sense, the value is limited to a range of 10% - 90%. If the given value is outside this range, it is cropped to it. Specifies the percent of transparence to use if transparent selection is used. 75 AW Specifies the maximum allowed luminance the system's selection color may have. When the color fetched from the system is brighter (luminacne is bigger), it will be scaled to a luminance of exactly this given value. Specifies the maximum allowed luminance for the system's selection color. 70 OS Contains miscellaneous settings for the auto correction. OS Specifies if the replacement table should be used to replace letter combinations with defined text Use replacement table true OS Specifies if two initial capitals should be corrected automatically. Correct two initial capitals true OS Specifies if the letter at the beginning of a sentence should be capitalized automatically. Capitalize first letter of every sentence true OS Specifies if text should be formatted in bold or underlined when the corresponding characters are entered (*bold*, _underline_). Apply underline or bold true OS Specifies if character strings which could represent an URL should be converted to a hyperlink. Detect URL true OS Specifies if ordinal numbers should be displayed with raised endings. Replace ordinal numbers true OS Specifies if minus signs should be replaced by dashes automatically. Replace dashes true cedricbosdo Adds a non-breaking space before the characters :;!? in french. Add non-breaking space true OS Specifies if multiple spaces should be combined into one. Ignore double spaces false Kohei Yoshida Specifies whether or not to correct accidental use of CAPS lock key. Correct accidental use of cAPS LOCK key true OS Specifies if single quotes should be replaced. Single quotes - Replace false OS Specifies the start single quote. Start single quote OS Specifies the end single quote. End Single quote OS Specifies if double quotes should be replaced. Double quotes - Replace true OS Specifies the start quote. Start quote OS Specifies the end quote. End quote Contains settings to apply replacement rules and exceptions. OS Specifies if defined words with two initial capital letters should not be included in the AutoCorrect replacement. Words with two initial capital letters - Add automatically true OS Specifies if defined abbreviations should be taken into account to exclude a preceding capital letter. Abbreviations (no subsequent capital letter) - Add automatically true AF Specifies cache related options. AF Specifies the cache related options for the drawing engine. AF Determines the maximum number of OLE objects that can be held in RAM for drawings, presentations and inserted drawing objects. The fewer OLE objects contained in RAM, the more space is available for other functions. The more OLE objects in RAM, the faster you can page through the objects since they do not always need to be loaded from the hard drive. 20 AF Specifies the cache related options for Writer. AF Determines the maximum number of OLE objects that can be held in RAM for the writer. The fewer OLE objects contained in RAM, the more space is available for other functions. The more OLE objects in RAM, the faster you can page through the objects since they do not always need to be loaded from the hard drive. 20 Specifies a group of graphic manager cache options. Graphic Manager Cache AF Specifies the maximum cache size for all graphical display objects. Total Graphic Cache Size 22000000 AF Specifies the maximum cache size for a single graphic display object. Graphic Object Cache Size 5500000 AF Specifies the time in seconds after which a cached object is freed from the cache. Graphic Object Release Timeout 600 MBA Contains the current and default path settings used by the Office. CD Contains various properties information purpose only. A flag which is set by the tools options dialog whenever a user changed the work path. true MBA Contains the global path settings, mainly those of the Options dialog. MBA Contains the Office installation path. MBA Contains the Office installation path in URL notation. Must match the UCB configuration. NN Specifies the directory that contains spreadsheet add-ins which use the old add-in API. $(progpath)/addin OS Specifies the settings of the AutoCorrect dialog. $(insturl)/share/autocorr:$(userurl)/autocorr OS Contains the directory which contains the AutoText modules. $(insturl)/share/autotext/$(vlang):$(userurl)/autotext MBA Stores the automatic backup copies of documents. $(userurl)/backup MBA Contains the Basic files, which are used by the AutoPilots. $(insturl)/share/basic:$(userurl)/basic MBA Contains the bitmap files which can be used for menu and toolbar icons. $(insturl)/share/config/symbol MBA Contains the configuration files. This value cannot be changed through the user interface. $(insturl)/share/config TL Contains the provided dictionaries. $(insturl)/share/wordbook/$(vlang) PB Specifies the path to save folder bookmarks. $(userurl)/config/folders MBA Specifies the directory where all the filters are stored. $(progpath)/filter AF Specifies the directory which contains the Gallery database and multimedia files. $(insturl)/share/gallery:$(userurl)/gallery DL Specifies the directory that is displayed when the dialog for opening a graphic or for saving a new graphic is called. $(userurl)/gallery ABI Specifies the path to the Office help files. $(instpath)/help TL Contains the files that are necessary for the spellcheck. $(insturl)/share/dict MBA Contains the Office modules. $(progpath) DL Specifies the path to the palette files *.SOB to *.SOF containing user-defined colors and patterns. $(userurl)/config MBA Specifies the directory in which the plugins are saved. $(progpath)/plugin Without replacement. ABI Specifies the location where misc data are stored. $(userpath)/store Replaced by org.openoffice.Office.Paths/Temp MBA Specifies the base directory used by the Office to store temp files. MBA Specifies the templates originate from these folders and sub-folders. $(insturl)/share/template/$(vlang):$(userurl)/template MBA Specifies additional folders containing a global user interface configuration. The final user interface configuration is merged from UserConfig and from these folders. $(insturl)/share/config MBA Specifies the folder with the user settings. $(userurl)/config TL Contains the custom dictionaries. $(userurl)/wordbook MBA Specifies the path of the work folder, which can be modified according to the user's needs. The path specified here can be seen in the Open or Save dialog. $(work) MBA Contains the default values of all the paths, which can be modified according to the user's needs. They are used when pressing the Standard-button in the Options dialog. Specifies the default directory that contains spreadsheet add-ins which use the old add-in API. $(progpath)/addin Specifies the default directory for the settings of the AutoCorrect dialog. $(insturl)/share/autocorr:$(userurl)/autocorr Specifies the default directory where the AutoText modules are located. $(insturl)/share/autotext/$(vlang):$(userurl)/autotext Specifies the default directory for the automatic backup copies of documents. $(userurl)/backup Specifies the default directory where the Basic files, used by the AutoPilots, are located. $(insturl)/share/basic:$(userurl)/basic Specifies the default directory where the bitmap files, which can be used for the menu and toolbar icons, are located. $(insturl)/share/config/symbol Specifies the default directory where the configuration files are stored. $(insturl)/share/config Specifies the default directory where the provided dictionaries are located. $(insturl)/share/wordbook/$(vlang) Specifies the default directory where folder bookmarks are stored. $(userurl)/config/folders Specifies the default directory where all the filters are stored. $(progpath)/filter Specifies the default directory where the Gallery database and multimedia files are located. $(insturl)/share/gallery:$(userurl)/gallery Specifies the default directory used by the dialog for opening a graphic or for saving a new graphic. $(userurl)/gallery Specifies the default directory where Office help files are located. $(instpath)/help Specifies the default directory where the files that are necessary for the spellcheck are saved. $(insturl)/share/dict Specifies the default directory which contains the Office modules. $(progpath) Specifies the default directory for the palette files *.SOB to *.SOF containing user-defined colors and patterns. $(userurl)/config Specifies the default directory where the Office plugins are located. $(progpath)/plugin Specifies the default directory that is used as a base directory for all temporary Office files. $(temp) Specifies the default directory where all provided templates are located in folders and sub-folders. $(insturl)/share/template/$(vlang):$(userurl)/template Specifies the default directories for the global user interface configuration. The final user interface configuration is merged from UserConfig and from these folders. Specifies the default directory which stores the user settings. $(userurl)/config Specifies the default directory which stores the custom dictionaries. $(userurl)/wordbook Specifies the default working directory where user stores documents. $(work) OS Contains some common settings for fonts. OS Contains settings for the font substitution. OS Determines if the list of font replacements is applied or not Apply replacement table false OS Specifies a substitution of the requested font, even if this font is available on the user's system. PB Contains the settings for the font selection box in the object bar. PB Contains the last five fonts, which are shown on the top of a list, beginning with the last one. This list will be displayed on the font-name-box of the object bar. true PB Specifies that the names of the selectable fonts will be displayed with this font. true OS Specifies the font name and height used in HTML source view Specifies the name of the font that is used in source views (HTML source view or BASIC IDE) Specifies the height, in points, of the font that is used in source views (HTML source view or BASIC IDE) 10 Specifies whether only non-proportional font should be presented on the dialog page. true AF Specifies Gallery options. Gallery Options AF Deprecated. false AS Contains information about configurable menus. Contains all entries of new menu. Contains all entries of wizard menu. PB Contains all help bookmarks. AS Contains history information. PB Describes the range and current size of the help bookmark history list. Defines the minimum range of the help bookmark history list. Defines the maximum range of the help bookmark history list. 10000 Describes the range and current size of the history list. Defines the min range for the history size. Defines the max range for the history size. 100 Describes the range and current size of the picklist shown inside the menu. Defines the min range for the picklist size. Defines the max range for the picklist size. 10 Contains the most recently opened help documents. Contains the most recently opened documents. Contains the most recently used documents displayed in the file menu. MBA Contains settings which are used during the Office startup to check for unfinished work. MBA Sends a mail that includes the stack trace after a crash. false MBA Enables UI for sending document as e-mail false MBA Enables mechanism for centralized disabling of functionality false BM Specifies that If this option is set to true, the new development chart library is used instead of the standard one. Do not set this option to true unless you know exactly what to do. This new library will be unstable and incomplete most of the time. This flag will be removed when the new library is in a stable state. false CD Specifies the current or last temp directory. This directory will be removed during shutdown or next office start. AS Contains the documents that were opened when the office crashed. MBA Contains general settings about the saving process. MBA Specifies if the all open windows and documents should be saved. If set to true, the URLs of all open documents and all view properties of all open views are saved when terminating the application. Open documents false MBA Contains settings which specify how documents are saved. MBA Saves OOo 6.0 XML file documents unpacked into a directory. Documents are represented by the directory content and not by a single file. Save XML files unpacked false PB Specifies if the user's name should be written into the Properties dialog of the document when saving the document. Use data for document properties true MBA Specifies whether all modified documents are automatically saved in a time interval. AutoSave every false MBA Specifies whether to create a backup copy when a modified document is saved. Always create backup copy false MBA Specifies if the document properties dialog will be opened for editing every time a document is saved under a new filename. Edit document properties before saving false MBA Shows a prompt during AutoSave,even when the document has a filename. Prompt to save true MBA Specifies the AutoSave time interval in minutes. Minutes Specifies that the minimum time interval is 1 minute. Specifies that the maximum time interval is 60 minutes. 15 MBA Saves view properties of last active document view when saving a document. Document view true MBA Specifies if files saved in the OOo 6.0 XML file formats should be in pretty printing format. Saving and loading the document takes more time in pretty printing format. Open windows false MBA Specifies if a warning message is shown if a file is going to be saved to an alien format. Open windows true MAV If the option is set, every time a user triggers a plain Save operation, SaveAs operation with possible additional user notifications will be started. false PB If the value is "true", then the ODF that is saved by OpenOffice.org will be backward compatible to previous minor versions. true PB Specifies if the printer settings will be loaded with the document. true MBA Contains settings on how graphics contained in a document should be saved. AF Specifies how graphics contained in a document are saved. Save graphics Normal/Compressed/Original format Normal Compressed Original format 1 MBA Specifies how URLs in documents should be processed during save. MBA Specifies whether URLs in documents should be saved relative to the file system. File system true MBA Specifies if URLs in documents should be saved relative to the Internet. Internet true PB Specifies ODF settings. PB Specifies the default ODF version for saving documents. ODFVER_UNKNOWN ODFVER_010 ODFVER_011 ODFVER_012 ODFVER_LATEST 3 MBA Contains settings regarding the loading of documents. MBA Specifies whether the user defined configuration settings are loaded together with the document. Load user-defined settings true MAV Specifies whether the office update dialog should be shown in case the loaded document has newer ODF version than the maximal supported one. true MBA Contains security specific Office settings. MBA Contains security settings regarding Basic scripts. MBA Lists all trustworthy URLs: file: All scripts from the local file system including a LAN; private:explorer: Scripts from the Explorer; private:help: Scripts in the help system; private:newmenu: Scripts that are executed by the commands File-New and AutoPilot; private:schedule: Scripts of the scheduler; private:searchfolder: Scripts of the searchfolder; private:user: Scripts that are entered in the URL field. MBA Determines how Office Basic scripts should be handled. Never According to Path List Always 1 MBA Specifies whether execution of plugins found inside a document is allowed. true MBA Specifies whether a warning box should be displayed before executing a script. false MBA Specifies whether the user must confirm before a basic script can be executed. true GT Specifies wether to warn when saving or sending documents with personal/hidden data. false GT Specifies wether to warn when signing documents with personal/hidden data. true GT Specifies wether to warn when printing documents with personal/hidden data. false GT Specifies wether to warn when creating PDF documents with personal/hidden data. false GT Specifies wether to remove personal information on saving. false GT Specifies wether to recommend password protection when saving documents. false PB Specifies whether ctrl-click is required to follow hyperlinks. true GT Level of Macro security. Lowest level. Highest level. 2 MAV Specifies whether the macro execution is disabled in general. If it is set to true, the "MacroSecurityLevel" is ignored. If it is set to false, the mentioned entry specified the level of macro security. false GT List with trusted authors. MBA Contains window and dialog settings. PB Specifies the scaling only of the screen representation [UNIT=%]. Scaling PB Specifies the minimum range of the scaling. PB Specifies the maximum range of the scaling. 100 PB Determines the look and feel of the application. Look & Feel Standard Macintosh X Window OS/2 0 CD Contains settings to change new document window behavior. CD Every new document window will be forced to front and grabs the focus. true MBA Contains settings on how the application window should be displayed. MBA Specifies whether the application window should be opened in Fullscreen mode. false MBA Specifies the preferred view of the application window. Use last setting Show in task bar Open in Fullscreen mode 0 MBA Contains settings which specify how dialogs and toolbars should be displayed. MBA Specifies whether toolbar buttons should be drawn large or small. True means large. Large buttons false MBA Specifies whether toolbox buttons should be drawn with a flat or 3D design. True means flat design. Flat buttons true PB Specifies TabDialogs with colored tab control (True) Colored tab controls false PB Determines the automatic mouse positioning on dialogs: 0 - Default button 1 - Dialog center 2 - No automatic positioning Mouse positioning Snap To Button Snap To Middle No Snap 2 OS Determines the action assigned to the middle mouse button: 0 - No action 1 -Auto scroll 2 - Paste selection. Middle mouse button No action Auto scroll Paste selection 1 PB Specifies TabDialogs with single line tab control (True). Single line tab controls false SSA Contains localization specific settings. SSA Specifies if shortcuts are assigned automatically. SSA Specifies the percentage for enlarging controls. SSA Specifies the upper limit for enlarging the controls is 100%. SSA Specifies the upper limit for enlarging the controls is 100%. PB Contains menu view settings. PB Shows all deactivated menu entries. Menu commands that are normally not necessary are hidden by default. true CMC Indicates whether icons in the office menus should shown/hidden by following the System theme. true CD Indicates whether icons in the office menus should be displayed. true PB Specifies automatic selection while moving the mouse over a menu (True). Menu follows mouse pointer true MBA Contains settings for general windows used by the Office. PB Specifies the representation of the window while dragging. Window Drag With window contents Frame only From system settings 2 MBA Deprecated. Deprecated. Deprecated. false Deprecated. ZoomIn Small ForceDock AutoHide Task CantGetFocus Deprecated. MBA Specifies the properties of window containers for docked windows. MBA Deprecated. MBA Deprecated. MBA Deprecated. Stick/Hidden Floating/Hidden Stick/Visible Floating/Visible Deprecated. Deprecated. Font antialiasing properties Specifies font antialiasing properties Font Antialiasing Enabled true Specifies an additional limit if Font Antialiasing is enabled. Fonts that are smaller than the specified limit are not anti-aliased. Font Antialiasing Minimum Pixel Height 8 MBA Contains the settings regarding the undo operation in the Office. MBA Specifies how many operations can be undone in a row. Number of steps Specifies the lowest number of undo steps possible. Specifies the highest number of undo steps possible. 100 PB Specifies options related to the setup. Specifies options related to the installed languages. Contains the installed Office languages for the menus and dialogs. AF Specifies options related to printing. MBA Specifies if printing a document can modify a document due to reformatting (PrinterOptions) PrintingModifiesDocument false OS Contains settings for print specific warnings. OS Specifies if a warning should be displayed in case the printout requires a specific paper size (Warnings) Paper size false OS Specifies if a warning should be displayed in case the printout requires a specific paper orientation (Warnings) Paper orientation false OS Specifies if a warning should be displayed in case the printer defined in the document was not found (Warnings) Not found false AF Specifies if a warning should be displayed in case the printout contains transparent objects. (Warnings) Transparency true AF Specifies the options related to printing. Specifies the options related to printing. AF Indicates whether to ignore transparency for the output of objects. (PrinterOptions) ReduceTransparency false AF Specifies type of transparency reduction: 0 - Automatically determine reduction, 1 - Always disabled. (PrinterOptions) ReducedTransparencyMode 0 AF Indicates whether to reduce memory usage for output of gradients by limiting the number of gradient steps. (PrinterOptions) ReduceGradients false AF Specifies type of gradient reduction: 0 - reduce the number of stripes, 1 - reduce to color. (PrinterOptions) ReducedGradientMode 0 AF Specifies the maximum number stripes used for output of gradients. (PrinterOptions) ReducedGradientStepCount 64 AF Indicates whether to reduce the memory usage of bitmaps for print process by limiting the resolution. (PrinterOptions) ReduceBitmaps false AF Specifies type of bitmap reduction: 0 - Automatically determine optimal resolution, 1 - Use original resolution, 2 - User defined resolution. (PrinterOptions) ReducedBitmapMode 1 AF Specifies resolution of reduced bitmaps: 0 - 72DPI, 1 - 96DPI, 2 - 150DPI, 3 - 200DPI, 4 - 300DPI, 5 - 600DPI. (PrinterOptions) ReducedBitmapResolution 3 AF Indicates whether to reduce the resolution of automatically created substitution bitmaps of transparent objects. (PrinterOptions) ReducedBitmapIncludesTransparency true AF Indicates whether to create only grayscale output of all objects. (PrinterOptions) ConvertToGreyscales false Specifies the options for printing to a file. Print File AF Indicates whether to ignore transparency for the output of objects. (PrintFileOptions) ReduceTransparency false AF Indicates the type of transparency reduction: 0 - Automatically determine reduction, 1 - Always disabled. (PrintFileOptions) ReducedTransparencyMode 0 AF Indicates whether to reduce memory usage for output of gradients by limiting the number of gradient steps. (PrintFileOptions) ReduceGradients false AF Indicates the type of gradient reduction: 0 - Reduce the number of stripes, 1 - Reduce to color. (PrintFileOptions) ReducedGradientMode 0 AF Specifies the maximum number stripes used for output of gradients. (PrintFileOptions) ReducedGradientStepCount 64 AF Indicates whether to reduce the memory usage of bitmaps for the print process by limiting the resolution. (PrintFileOptions) ReduceBitmaps false AF Specifies the type of bitmap reduction: 0 - Automatically determine optimal resolution, 1 - Use original resolution, 2 - User defined resolution. (PrintFileOptions) ReducedBitmapMode 1 AF Specifies the resolution of reduced bitmaps: 0 - 72DPI, 1 - 96DPI, 2 - 150DPI, 3 - 200DPI, 4 - 300DPI, 5 - 600DPI. (PrintFileOptions) ReducedBitmapResolution 3 AF Indicates whether to reduce the resolution of automatically created substitution bitmaps of transparent objects. (PrintFileOptions) ReducedBitmapIncludesTransparency true AF Indicates whether to create only grayscale output of all objects. (PrintFileOptions) ConvertToGreyscales false MBA Lists open documents or windows. MBA Lists open documents or windows. OS Contains settings specifying if a XML package is added to the applications binary files. OS Defines if a XML package is added to the Writer binary files. OS Defines if a XML package is added to the Calc binary files. OS Defines if a XML package is added to the Impress binary files. OS Defines if a XML package is added to the Draw binary files. FS Contains settings that specify the common help settings. ABI Determines wether basic help should be shown. true ABI Determines the locale for the help pages. ABI Determines the operating system on which the help system is displayed. MBA Activates the Tip help. Tips true MBA Activates the Extended help. Extended Tips false ABI Specifies the name of the stylesheet used to display help content. Default MBA Specifies the properties of the HelpAgent. Specifies whether the HelpAgent is enabled. enable HelpAgent true Specifies the time-out value in seconds after which the HelpAgent is closed automatically if ignored by the user. HelpAgent timeout 30 Specifies how often the user must ignore a given HelpAgent topic until it is disregarded in the future (any requests for this topic will be dropped silently). HelpAgent retry limit 3 Contains the help URLs which have been ignored at least once by the user, together with a counter of how often they have been ignored. HelpAgent ignore list PL Contains settings for the start center. Contains a string specifying the URL to be browsed for additional features (e.g. extensions) Contains a string specifying the URL to be browsed for information about the product Contains a string specifying the URL to be browsed for additional template documents Contains a number deciding the layout style of the start center 0 FS Contains various settings regarding the product registration feature. Contains a string specifying the URL with placeholders to be used for online registration. Contains a string specifying the real URL to be used for online registration. Contains a string representation of the date on which the user receives a reminder (e.g. "13.02.2002"). Contains the number used internally to determine when the dialog should be started. 1 Contains a Boolean that specifies if the "Registration..." menu item is available. true CD/OBR Current product ID. This data is saved in a dedicated file since OOo 3.0 FCS CD/OBR Specifies product specific IDs and associated instance UUIDs This data is saved in a dedicated file since OOo 3.0 FCS JL Contains Java related settings. Contains Applet related settings. Enables/disables Java applets in Office documents. Enable Applets false AF Specifies the options related to the vectorization of bitmaps. AF Specifies the number of colors that are used to create a vector graphic in Draw/Impress [UNIT=count]. Number of colors Specifies that the lowest number that can be used to create a vector graphic is 8. Specifies that the lowest number that can be used to create a vector graphic is 32. 8 AF Specifies the number of pixels that you want to combine as a single pixel when creating a vector graphic. Point reduction Specifies the minimum value to reduce point is 0 pixels. Specifies the maximum value to reduce point is 32 pixels. 0 AF Indicates whether to create a tiled background before vectorizing. Fill holes false AF Specifies the extent of background tiles that are used for vectorizing [UNIT=pixel]. Tile extent Specifies that the minimum extent is 8 pixels. Specifies that the maximum extent is 128 pixels. 32 AF Specifies the options for images. Image Specifies the color options for images. Image Color AF Deprecated. Number Deprecated. Deprecated. 256 AF Deprecated. Number Deprecated. Deprecated. 16 AF Deprecated. Brightness Deprecated. Deprecated. 10 AF Deprecated. Contrast Deprecated. Deprecated. 10 AF Deprecated. Angle Deprecated. Deprecated. 4500 AF Deprecated. To the left / To the right true AF Deprecated. Threshold value Deprecated. Deprecated. 50 Specifies the RGB color options for images. Image RGB Color AF Deprecated. Red Deprecated. Deprecated. 10 AF Deprecated. Green Deprecated. Deprecated. 10 AF Deprecated. Blue Deprecated. Deprecated. 10 Specifies the effects options for images. Image Effects AF Deprecated. X Tile Deprecated. Deprecated. 4 AF Deprecated. Y Tile Deprecated. Deprecated. 4 AF Deprecated. Definition Deprecated Deprecated Deprecated Deprecated 2 AF Deprecated. Threshold value Deprecated. Deprecated. 10 AF Deprecated. Invert false AF Deprecated. X Tile Deprecated. Deprecated. 4 AF Deprecated. Y Tile Deprecated. Deprecated. 4 AF Deprecated. Degree Deprecated Deprecated Deprecated Deprecated 2 AF Deprecated. Intensity Specifies that the minimum intensity is 0. Specifies that the maximum intensity is 100. 10 NN Specifies settings for the date formats used. NN Specifies the first year that can be entered using two-digit-year date formats. First two-digit year 1930 SJ / OS / KA Specifies default settings of Microsoft-, Graphic- and HTML filters. SJ Specifies default settings of Microsoft filters. Specifies default settings of Microsoft import filters. Specifies if convertible MathType OLE objects are converted into Math objects. true Specifies if convertible WinWord OLE objects are converted into Writer objects. true Specifies if convertible Excel OLE objects are converted into Calc objects. true Specifies if convertible PowerPoint OLE objects are converted into Impress objects. true Flag to control use of enhanced fields. true Specifies default settings of Microsoft export filters. Specifies if embedded Math objects are converted into MathType objects. true Specifies if embedded Writer objects are converted into WinWord objects. true Specifies if embedded Calc objects are converted into Excel objects. true Specifies if embedded Impress objects are converted into PowerPoint objects. true SJ Specifies if previews are created when saving PowerPoint documents. true SJ Specifies if previews are created when saving Excel documents. false SJ Specifies if previews are created when saving Word documents. false SJ Specifies default settings of graphic import and export dialogs. Specifies default settings of graphic import dialogs. Specifies default settings of the PCD - Photo CD Base import dialog. Specifies import resolution of PCD graphics. Resolution - Base16 / Base4 / Base PCD-Base16, 192*128 PCD graphic. PCD-Base4, 384*256 PCD graphic. PCD-Base, 768*512 PCD graphic. 2 Specifies default settings of graphic export dialogs. Specifies default settings of the Windows Bitmap export dialog. Specifies usable export modes. Mode - Original / Resolution / Size Original size Logical size (dpi/pixel ratio) Given size 0 Specifies resolution which is to be used if export mode is 1. [UNIT=dpi] Resolution 75 150 300 600 75 Specifies the number of colors that are to be used for the export. Color resolution Original 1 bit, 1 bit threshold 1 bit, 1 bit dithered 4 bit, 4 bit grayscale 4 bit, 4 bit color palette 8 bit, 8 bit grayscale color 8 bit, 8 bit color palette 24 bit, 24 bit true color 0 Specifies if Run-Length-Encoding should be used in the export. RLE coding true Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies default settings of the EPS - Encapsulated Postscript export dialog. Specifies if a preview graphic should be exported together with the Encapsulated PostScript file. Due to the fact that most programs can't render eps graphics, it is useful to provide a preview that can be displayed as replacement. The preview graphic will also be printed if the printer is not capable of Postscript. Preview - Picture preview (TIFF) / Interchange (EPSI) None TIFF Interchange (EPSI) - 1 bit color resolution TIFF and EPSI 0 Specifies the PostScript version that has to be used for the EPS export. Because not every PostScript printer is capable of version 2 PostScript, it is sometimes necessary to create version 1 PostScript graphics. PostScript Level 1 does not support color and bitmap compression. Version - Level 1 / Level 2 Version 1 PostScript Version 2 PostScript 2 Specifies if color or grayscale format is used for the EPS export. This option is not available for version 1 PostScript files. Color format - Color / Grayscale Color format Grayscale format 2 Specifies if bitmaps are exported by using the LZW (Lempel - Ziv - Welch) compression algorithm. Compression is only available for level 2 PostScript files. Compression - LZW encoding / None LZW compression No compression 2 Specifies if glyph outlines are exported. They produce the highest quality and it is the only possible way to create EPS files that are CJK compliant. Not using glyphs will produce smaller files, but it might lead to problems if not all fonts are available during printing. Export text using glyph outlines - always / never Glyph outlines No glyph outlines 0 Specifies default settings of the GIF - Graphics Interchange export dialog. Specifies if graphics should be exported using interlace. It is recommended for big pictures to activate interlace, so the content can be displayed immediately when loading the picture. Deactivate Activate 1 Specifies if the graphic background is stored as transparent. No transparency Transparency 1 Specifies default settings of the JPEG - Joint Photographic Experts Group export dialog. Specifies quality of the JPG export. A higher value results in higher quality and file size. Represents lowest value that can be used. The lower the value, the less good is the compression quality and the bigger is be the file size. Represents highest value that can be used. The higher the value, the better is the compression quality and the smaller is the file size. 75 Specifies if graphics are exported using true color or grayscale. True colors Grayscale 0 Specifies if graphics are exported with the original- or selected size. Specifies if graphics are exported with the original- or selected size. Original size Given size 0 Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies default settings of the PCT - Mac Pict export dialog. Specifies if graphics are exported with original- or selected size. Original size Given size 0 Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies default settings of the PBM - Portable Bitmap export dialog. Specifies if graphics are exported to binary- or ASCII format. Binary ASCII 1 Specifies default settings of the PGM - Portable Graymap export dialog. Specifies if graphics are exported to a binary- or ASCII format. Binary ASCII 1 Specifies default settings of the PPM - Portable Pixelmap export dialog. Specifies if graphics are exported to a binary- or ASCII format. Binary ASCII 1 Specifies default settings of the SVM - StarView Meta File export dialog. Specifies if graphics should be exported with the original- or selected size. Original size Given size 0 Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies default settings of the WMF - Windows Metafile export dialog. Specifies if graphics should be exported with the original- or selected size. Original size Given size 0 Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies default settings of the EMF - Enhanced Metafile export dialog. Specifies if graphics should be exported with the original- or selected size. Original size Given size 0 Specifies the logical size of a graphic. [UNIT=1/100 mm]. Specifies default settings of the PNG - Portable Network Graphic export dialog. Specifies export compression settings which ranges from 0 (no compression) to 9 (maximum compression). The calculating time increases with an ascending compression value. Represents lowest value that can be used. The lower the value, the lower the compression quality and the larger the file size. Represents the highest value that can be used. The higher the value, the higher the compression quality and the smaller the file size. 6 Specifies if graphics should be exported using interlace. It is recommended for big pictures to activate interlace, so the content can be displayed immediately when loading the picture. Deactivate interlace mode Activate interlace mode 1 OS Contains settings for HTML import/export. Contains settings for HTML import. ER Specifies if numbers should be parsed according to the en-US locale instead of the user's locale. Use 'English (USA)' locale for numbers false OS Specifies if unknown tags should be imported as fields. Import unknown HTML tags as fields false OS Specifies if font settings should be ignored when importing. Ignore font settings false Specifies font size for HTML. OS Specifies font size for HTML as Token Font 1. Size 1 7 OS Specifies font size for HTML as Token Font 2. Size 2 10 OS Specifies font size for HTML as Token Font 3. Size 3 12 OS Specifies font size for HTML as Token Font 4. Size 4 14 OS Specifies font size for HTML as Token Font 5. Size 5 18 OS Specifies font size for HTML as Token Font 6. Size 6 24 OS Specifies font size for HTML as Token Font 7. Size 7 36 Contains settings for HTML export. OS Specifies the browser for which the HTML export should be optimized Browser Html 3.2 MSIE 4.0 Netscape 3.0 Writer Netscape 4.0 4 OS Specifies if Office Basic instructions are considered when exporting in HTML format. (Productname) Basic false OS Specifies if the print layout of the current document should also be exported. Print layout false OS Specifies if graphics are copied to the Internet server when uploading via FTP. Copy local graphics to Internet true OS Specifies if a warning should be displayed to point out that the available Basic macros will be lost when exporting in HTML format. Display warning true OS Specifies the mimetype for the text encoding. Encoding export KA Specifies default settings of PDF export dialog. Specifies default settings of PDF export dialog. Use following properties instead: UseLosslessCompression, Quality, UseResolutionReduction, ResolutionReduction SJ Deprecated. 1 SJ Specifies if graphics are exported to PDF using a lossless compression eg. PNG or if they are compressed using the JPEG format. false SJ Specifies quality of the JPG export. A higher value results in higher quality and file size. Represents lowest value that can be used. The lower the value, the less good is the compression quality and the bigger is be the file size. Represents highest value that can be used. The higher the value, the better is the compression quality and the smaller is the file size. 90 SJ Specifies if the resolution of each image is reduced to the resolution specified by the property MaxImageResolution. false If the property ReduceImageResolution is set to true all images will be reduced to the given value in DPI. 75 150 300 600 1200 300 SJ Determines if PDF are created by using special tags also known as Tagged PDF. false SJ Specifies if notes are exported to PDF. false PL Specifies if bookmarks are exported to PDF. true PL Specifies how many bookmark levels should be opened in the reader application when the PDF gets opened. -1 SJ Specifies if notes pages are exported to PDF. (Notes pages are available in Impress documents only). false SJ Specifies slide transitions are exported to PDF. This option is active only if storing Impress documents. true pl Specifies whether form fields are exported as widgets or only their fixed print representation is exported. true pl Specifies whether to embed the 14 standard PDF fonts or not. false Specifies the submitted format of a PDF form. Specifies that forms type FDF is used. Specifies that forms type PDF is used. Specifies that forms type HTML is used. Specifies that forms type XML is used. 0 pl Specifies whether multiple form fields exported are allowed to have the same field name. false FME Specifies that automatically inserted empty pages are suppressed. This option is active only if storing Writer documents. true PL Specifies that a stream is inserted to the PDF file which contains the original document for archiving purposes. false beppec56 Specifies whether to hide the PDF viewer menubar when the document is active. false beppec56 Specifies whether to hide the PDF viewer toolbar when the document is active. false beppec56 Specifies whether to hide the PDF viewer controls when the document is active. false beppec56 Specifies that the PDF viewer window is opened full screen when the document is opened. false beppec56 Specifies that the PDF viewer window is centered to the screen when the PDF document is opened. false beppec56 Specifies that the PDF viewer window is opened full screen, on top of all windows.. false beppec56 Specifies that the title of the document, if present in the document properties, is displayed in the PDF viewer window title bar. true beppec56 Specifies how the PDF document should be displayed when opened. Select the default viewer mode, neither outlines or thumbnails. The document is opened with outline pane opened The document is opened with thumbnail pane opened 0 beppec56 Specifies the action to be performed when the PDF document is opened. Opens with default zoom magnification. Opens magnified to fit the entire page within the window. Opens magnified to fit the entire page width within the window. Opens magnified to fit the entire width of its boundig box within the window (cuts out margins). Opens with the zoom level specified in the Zoom property. 0 pl specifies the zoom level a PDF document is opened with. Only valid if "Magnification" is set to "4". 100 pl Specifies the page on which a PDF document should be opened in the viewer application. 1 beppec56 Specifies the page layout to be used when the document is opened. Display the pages according to the reader configuration. Display one page at a time. Display the pages in one column. Display the pages in two columns odd pages on the right, to have the odd pages on the left the FirstPageOnLeft property should be used as well. 0 beppec56 Used with the value 3 of the PageLayout property above, true if the first page (odd) should be on the left side of the screen. false beppec56 Specifies what printing is allowed. The document cannot be printed. The document can be printed at low resolution only. The document can be printed at maximum resolution. 2 beppec56 Specifies the change allowed to the document. The document cannot be changed. Inserting deleting and rotating pages is allowed. Filling of form field is allowed. Both filling of form field and commenting is allowed. All the changes of the previous selections are permitted, with the only exclusion of page extraction (copy). 4 beppec56 Specifies that the pages and the document content can be extracted to be used in other documents (copy and paste). true beppec56 Specifies that the document content can be extracted to be used in accessibility applications. true beppec56 Specifies the version of PDF to emit. PDF 1.4 (default selection). PDF/A-1 (ISO 19005-1:2005) 0 beppec56 Specifies that the file system related hyperlinks (file:// protocol) present in the document will be exported as relative to the source document location. false beppec56 Specifies the way the exported PDF will be viewed (experienced) by the user. Specifies that the PDF will be exported with all the links external to the document treated as URI. This is the Default Specifies that the PDF will be exported in order to be viewed through a PDF reader application only. Valid only if not exporting to PDF/A-1 (e.g. SelectPdfVersion not set to 1). Specifies that the PDF will be exported in order to be viewed through an Internet browser, using the PDF plug-in provided with it. The bookmark of the URI will be rendered compatible with the target bookmark generated with OOo PDF Export feature (see ExportBookmarksToPDFDestination, below). 0 beppec56 Specifies that the target documents with .od[tpgs] extension, will have that extension changed to .pdf when the link is exported to PDF. The source document remains untouched. false beppec56 Specifies that the bookmarks contained in the source OpenOffice.org file should be exported to the PDF file as Named Destination (see PDF 1.4 section 8.2.1). false MBA Determines the miscellaneous entries for the common group. AS Determines the maximum count of documents, which are allowed to be open at the same time. NIL will be interpreted as infinite! PB Enables/Disables Plugins. PluginsEnabled true FS Determines if the system's file and folder pickers should be used. If false, the proprietary file/folder picker implementations will be used. Relevant on platforms where file/folder picker integration is implemented. true MAV Allows to specify whether the OOo document file locking mechanics should use the system file locking. true MAV Allows to specify whether the OOo document file locking mechanics should use the lock file for locking. true THB Determines if a warning dialog should be displayed when a user checks the link checkbox in the insert graphics dialog. true PL Determines if the system's print dialog should be used. If false, the platform independent print dialog implementation will be used. Relevant on platforms where print dialog integration is implemented. false tml Determines whether to show the document creation and selection of the machine's default ODMA (Open Document Management Architecture) DMS (Document Management System). If true, and the machine has a DMS available, the DMS's dialog will be displayed. That dialog then gives the opportunity to use the application's dialog instead, which means the normal system file and folder pickers will be displayed. Relevant only on Windows. false RSiddhartha Disables the customization of the UI elements. false MBA Specifies which size of the symbols is used for the toolbars. 16x16 pixel icons larger icons 1 kendy Specifies which style of the symbols is used for the toolbars, menus, etc. Automatic, chosen according to the desktop Default - the OpenOffice.org default theme HiContrast Industrial Crystal - the KDE default theme Tango - the Gnome default theme Classic - the OpenOffice.org 2.0 default theme auto MBA Specifies which button style the toolbars should use. 3D style Flat style 1 FS Enables/Disables the usage of AutoPilots for form controls. true MBA Specifies if the office has never before been started. FirstRun true FS contains settings for the form layer of the applications. specifies certain default layout settings for form controls. All those settings can be overruled in concrete documents, they specify creation-time defaults only. specifies certain default layout settings for form controls in text documents specifies certain default layout settings for form controls in web pages specifies certain default layout settings for form controls in spreadsheet documents specifies certain default layout settings for form controls in drawing documents specifies certain default layout settings for form controls in presentation documents specifies certain default layout settings for form controls in XML form documents specifies certain default layout settings for form controls in database form documents specifies certain default layout settings for form controls in database text report documents. specifies settings for the property browser used for forms and form controls. FS Enables or disables the property browser's access to form/control properties which are not officially supported. false FS Enables or disables a help section at the bottom of the property browser, which shows the help of the currently active property. false OS Contains layout specific settings for Asian languages. OS Determines the kerning of western text and/or punctuation inside of Asian text. IsKerningWesternTextOnly true OS Determines the type of character distance compression in Asian text: 0 - no compression; 1 - compress punctuation only; 2 - compress interpunction an japanese kana. CompressCharacterDistance 0 OS Contains the characters at which lines are not allowed to begin or to end. For each locale there is a separate entry with the locale as its node name. StartEndCharacters OS / PB Contains all options for search. PB Specifies search for whole words only. false PB Specifies search backwards. false PB Specifies search with the use of regular expressions. false PB Specifies search for styles only. false PB Specifies search with similarity. false PB Specifies search as case sensitive. false PB Specifies search with the use of Asian options. false OS Specifies the divider label in case of a component-based search extension. OS Specifies the label of the first component-based search command. OS Specifies the label of the second component-based search command. mod Specifies if search includes comments(SwPostItFields) false OS Contains search options for the Japanese language. OS Does not distinguish between full-width and half-width characters. true OS Does not distinguish between hiragana and katakana characters. true OS Specifies search without distinguishing between characters with diphthongs and double consonants and plain characters. true OS Specifies search without distinguishing between minus signs, dashes, and long vowel sounds. true OS Specifies search without distinguishing between repeat character marks. true OS Specifies search without distinguishing between standard and nonstandard ideography. true OS Specifies search without distinguishing between standard and nonstandard ideography. true OS Specifies search without distinguishing between 'Di' and 'Zi' or 'Du' and 'Zu'. true OS Specifies search without distinguishing between 'Ba' and 'Va' or 'Ha' and 'Fa'. true OS Specifies search without distinguishing between 'Tsi', 'Thi' and 'Chi' or 'Dhi' and 'Zi'. true OS Specifies search without distinguishing between 'Hyu' and 'Fyu' or 'Byu' and 'Vyu'. true OS Specifies search without distinguishing between 'Se' and 'She' or 'Ze' and 'Je'. true OS Specifies search without distinguishing between 'Ia' and 'Iya'. true OS Specifies search without distinguishing between 'Ki' and 'Ku'. true OS Specifies search without distinguishing between punctuation characters. true OS Specifies search without distinguishing between characters used as blank spaces, such as full-width spaces, half-width spaces, and tabs. true OS Specifies search without distinguishing between prolonged sound marks. true OS Specifies search without distinguishing between normal dots and middle dots. true OS Specifies settings for the accessibility options. FS Enables the automatic detection of a high contrast mode set for your desktop. Some OS' do not provide this option explicitly, but allow the user to choose a color scheme that is HC-compliant implicitly, which is recognized if the option is set. detect system's high contrast true OS Enables the use of high contrast colors, instead of displaying the normal/original WYSIWYG colors. For page previews true OS Enables or disables the automatic time out of help tips. You can specify a duration (n) of 1 to 99 seconds. If this option is disabled, press the Esc key to dismiss the help tip. Help tips disappear after true OS Enables or disables the automatic time out of help tips. You can specify a duration (n) of 1 to 99 seconds. If this option is disabled, press the Esc key to dismiss the help tip. Help tips disappear after Specifies the number of seconds to wait before displaying a help tip. Specifies the number of seconds to display a help tip. 4 AF Indicates whether to allow the graphical animation in all SO/OO applications (i.e. animated GIFs and objects in Impress during presentation, animated graphical previews (Gallery, Insert-Graphics-From File, Animation Tool in Impress.) Allow animated graphics true AF Indicates whether to allow all textual animation like blinking and scrolling in all SO/OO applications. Allow animated text true OS Overrides all text color attributes set in a SO/OO document for display only. Always use automatic font color for screen display false OS Allows the user to change the UI font to the system default. Use system default user interface font true OS Indicates whether the cursor is displayed in read-only texts. Use text selection mode in readonly texts. false Replaced by org.openoffice.Office.Embedding/ObjectNames. MAV Deprecated Without replacement. OBR Specifies external helper applications / protocol handlers. OBR Specifies an external mail application to be used for Send as email. Without replacement. Indicates if the mail application in the OS specific user settings should be used. Specifies the external mail application to be used. Without replacement. Specifies the default external mail application. Mozilla 1.0 - 1.2 Without replacement. Contains a set of supported command line profiles. OS Contains various language/localization specific settings. PL Contains settings for (language/localization specific) input methods. Controls the behavior of the IIIMP status window on Unix. If true, the status window is always displayed. If false, the status window is never displayed. If nil (the default), the status window is displayed depending on the current locale. Contains settings for the Asian languages (Chinese, Japanese, Korean,...) layout. Specifies, whether CJK font settings are available (true) or not (false). false Specifies, whether vertical text is available (true) or not (false). false Specifies, whether Asian typography options like compression and forbidden characters are available (true) or not (false). false Specifies, whether Japanese find options are selectable for search and replace (true) or not (false). false Specifies whether Rubys are available (true) or not (false). false Specifies whether case mapping to half and full width, hiragana and katagana are available (true) or not (false). false Specifies whether writing in double lines is available (true) or not (false). false Specifies whether emphasis marks are available (true) or not (false). false Specifies whether vertical call out objects are available (true) or not (false). false Contains settings for the languages with complex text layout (Hebrew, Arabic, Thai,...). Specifies whether CTL font settings are available (true) or not (false). false Specifies whether CTL strings are checked for the correct input sequence(true) or not (false). false Specifies whether CTL strings are checked restricted for the correct input sequence(true) or not (false). Is only effective when CTLSequenceChecking is true. false Specifies whether CTL input sequences are corrected while typing. Is only effective when CTLSequenceChecking is true. false Specifies the type of text cursor movement (logical (0) or visual (1)) within mixed text (RTL and LTR). 0 Specifies the type of numerals (Arabic (0), Hindi (1), system settings (2) or Context(3)) is used per default in all applications. 0 SSA Specifies whether the whole user interface (UI) will be mirrored. If true, the UI will be right-to-left. If false, the UI will be left-to-right. If nil (the default), the UI will be mirrored depending on the office locale. Use cfg package Jobs instead of this. AS Uses cfg package Jobs instead of this component. Use cfg package Jobs instead of this. Uses cfg package Jobs instead of this component. Use cfg package Jobs instead of this. Uses cfg package Jobs instead of this component. FME Contains settings for smart tags. FME Contains Writer specific settings for smart tags. FME Specifies whether smart tag recognization is enabled. true FME A list of excluded smart tag types.