/************************************************************************* * * $RCSfile: Button.cxx,v $ * * $Revision: 1.3 $ * * last change: $Author: fs $ $Date: 2001-04-02 10:28:06 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #ifndef _FRM_BUTTON_HXX_ #include "Button.hxx" #endif #ifndef _TOOLS_DEBUG_HXX #include #endif #ifndef _URLOBJ_HXX #include #endif #ifndef _SV_SVAPP_HXX #include #endif //......................................................................... namespace frm { //......................................................................... using namespace ::com::sun::star::uno; using namespace ::com::sun::star::sdb; using namespace ::com::sun::star::sdbc; using namespace ::com::sun::star::sdbcx; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::container; using namespace ::com::sun::star::form; using namespace ::com::sun::star::awt; using namespace ::com::sun::star::io; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::util; //================================================================== //= OButtonModel //================================================================== DBG_NAME(OButtonModel) //------------------------------------------------------------------ InterfaceRef SAL_CALL OButtonModel_CreateInstance(const Reference& _rxFactory) { return *(new OButtonModel(_rxFactory)); } //------------------------------------------------------------------ OButtonModel::OButtonModel(const Reference& _rxFactory) :OImageModel(_rxFactory, VCL_CONTROLMODEL_COMMANDBUTTON, FRM_CONTROL_COMMANDBUTTON) // use the old control name for compytibility reasons { DBG_CTOR(OButtonModel, NULL); m_nClassId = FormComponentType::COMMANDBUTTON; } //------------------------------------------------------------------------------ OButtonModel::~OButtonModel() { DBG_DTOR(OButtonModel, NULL); } //------------------------------------------------------------------------------ Reference SAL_CALL OButtonModel::getPropertySetInfo() throw( RuntimeException ) { Reference xInfo( createPropertySetInfo( getInfoHelper() ) ); return xInfo; } //------------------------------------------------------------------------------ void OButtonModel::fillProperties( Sequence< Property >& _rProps, Sequence< Property >& _rAggregateProps ) const { FRM_BEGIN_PROP_HELPER(7) DECL_PROP2(CLASSID, sal_Int16, READONLY, TRANSIENT); DECL_PROP1(BUTTONTYPE, FormButtonType, BOUND); DECL_PROP1(TARGET_URL, ::rtl::OUString, BOUND); DECL_PROP1(TARGET_FRAME, ::rtl::OUString, BOUND); DECL_PROP1(NAME, ::rtl::OUString, BOUND); DECL_PROP1(TAG, ::rtl::OUString, BOUND); DECL_PROP1(TABINDEX, sal_Int16, BOUND); FRM_END_PROP_HELPER(); } //------------------------------------------------------------------------------ ::cppu::IPropertyArrayHelper& OButtonModel::getInfoHelper() { return *const_cast(this)->getArrayHelper(); } // XServiceInfo //------------------------------------------------------------------------------ StringSequence OButtonModel::getSupportedServiceNames() throw() { StringSequence aSupported = OControlModel::getSupportedServiceNames(); aSupported.realloc(aSupported.getLength() + 1); ::rtl::OUString*pArray = aSupported.getArray(); pArray[aSupported.getLength()-1] = FRM_SUN_COMPONENT_COMMANDBUTTON; return aSupported; } //------------------------------------------------------------------------------ ::rtl::OUString OButtonModel::getServiceName() { return FRM_COMPONENT_COMMANDBUTTON; // old (non-sun) name for compatibility ! } //------------------------------------------------------------------------------ void OButtonModel::write(const Reference& _rxOutStream) { OImageModel::write(_rxOutStream); _rxOutStream->writeShort(0x0002); // Version _rxOutStream->writeShort( (sal_uInt16)m_eButtonType ); ::rtl::OUString sTmp = INetURLObject::decode(INetURLObject::AbsToRel( m_sTargetURL ), '%', INetURLObject::DECODE_UNAMBIGUOUS); _rxOutStream << sTmp; _rxOutStream << m_sTargetFrame; writeHelpTextCompatibly(_rxOutStream); } //------------------------------------------------------------------------------ void OButtonModel::read(const Reference& _rxInStream) { OImageModel::read(_rxInStream); sal_uInt16 nVersion = _rxInStream->readShort(); // Version switch (nVersion) { case 0x0001: { m_eButtonType = (FormButtonType)_rxInStream->readShort(); ::rtl::OUString sTmp; _rxInStream >> sTmp; m_sTargetURL = INetURLObject::RelToAbs( sTmp ); _rxInStream >> m_sTargetFrame; } break; case 0x0002: { m_eButtonType = (FormButtonType)_rxInStream->readShort(); ::rtl::OUString sTmp; _rxInStream >> sTmp; m_sTargetURL = INetURLObject::RelToAbs( sTmp ); _rxInStream >> m_sTargetFrame; readHelpTextCompatibly(_rxInStream); } break; default : DBG_ERROR("OButtonModel::read : unknown version !"); m_eButtonType = FormButtonType_PUSH; m_sTargetURL = ::rtl::OUString(); m_sTargetFrame = ::rtl::OUString(); break; } } //================================================================== // OButtonControl //================================================================== //------------------------------------------------------------------ InterfaceRef SAL_CALL OButtonControl_CreateInstance(const Reference& _rxFactory) { return *(new OButtonControl(_rxFactory)); } //------------------------------------------------------------------------------ Sequence OButtonControl::_getTypes() { static Sequence aTypes; if (!aTypes.getLength()) { // my base class Sequence aBaseClassTypes = OImageControl::_getTypes(); Sequence aOwnTypes(2); Type* pOwnTypes = aOwnTypes.getArray(); pOwnTypes[0] = getCppuType((Reference*)NULL); pOwnTypes[1] = getCppuType((Reference*)NULL); aTypes = concatSequences(aBaseClassTypes, aOwnTypes); } return aTypes; } //------------------------------------------------------------------------------ StringSequence OButtonControl::getSupportedServiceNames() throw() { StringSequence aSupported = OControl::getSupportedServiceNames(); aSupported.realloc(aSupported.getLength() + 1); ::rtl::OUString*pArray = aSupported.getArray(); pArray[aSupported.getLength()-1] = FRM_SUN_CONTROL_COMMANDBUTTON; return aSupported; } //------------------------------------------------------------------------------ OButtonControl::OButtonControl(const Reference& _rxFactory) :OImageControl(_rxFactory, VCL_CONTROL_COMMANDBUTTON) ,nClickEvent(0) { increment(m_refCount); { // als ActionListener anmelden Reference xButton; query_aggregation( m_xAggregate, xButton); if (xButton.is()) xButton->addActionListener(this); } // Refcount bei 1 fuer Listener sal_Int32 n = decrement(m_refCount); } //------------------------------------------------------------------------------ OButtonControl::~OButtonControl() { if (nClickEvent) Application::RemoveUserEvent(nClickEvent); } // UNO Anbindung //------------------------------------------------------------------------------ Any SAL_CALL OButtonControl::queryAggregation(const Type& _rType) throw (RuntimeException) { Any aReturn = OImageControl::queryAggregation(_rType); if (!aReturn.hasValue()) aReturn = OButtonControl_BASE::queryInterface(_rType); return aReturn; } // ActionListener //------------------------------------------------------------------------------ void OButtonControl::actionPerformed(const ActionEvent& rEvent) { // Asynchron fuer starutil::URL-Button sal_uInt32 n = Application::PostUserEvent( LINK(this, OButtonControl,OnClick) ); { ::osl::MutexGuard aGuard( m_aMutex ); nClickEvent = n; } } //------------------------------------------------------------------------------ IMPL_LINK( OButtonControl, OnClick, void*, EMPTYARG ) { ::osl::ClearableMutexGuard aGuard( m_aMutex ); nClickEvent = 0; if (m_aApproveActionListeners.getLength()) { // Wenn es ApproveAction-Lisener gibt, muss ein eigener Thread // aufgemacht werden. if( !m_pThread ) { m_pThread = new OImageControlThread_Impl( this ); m_pThread->acquire(); m_pThread->create(); } m_pThread->addEvent(); } else { // Sonst nicht. Dann darf man aber auf keinen Fal die Listener // benachrichtigen, auch dann nicht, wenn er spaeter hinzukommt. aGuard.clear(); // recognize the button type Reference xSet(getModel(), UNO_QUERY); if (!xSet.is()) return 0L; if (FormButtonType_PUSH == *(FormButtonType*)xSet->getPropertyValue(PROPERTY_BUTTONTYPE).getValue()) { // notify the action listeners for a push button ::cppu::OInterfaceIteratorHelper aIter(m_aActionListeners); ActionEvent aEvt(static_cast(this), m_aActionCommand); while(aIter.hasMoreElements() ) { ((XActionListener*)aIter.next())->actionPerformed(aEvt); } } else actionPerformed_Impl( sal_False ); } return 0L; } // XButton //------------------------------------------------------------------------------ void OButtonControl::setLabel(const ::rtl::OUString& Label) throw( RuntimeException ) { Reference xButton; query_aggregation( m_xAggregate, xButton); if (xButton.is()) xButton->setLabel(Label); } //------------------------------------------------------------------------------ void SAL_CALL OButtonControl::setActionCommand(const ::rtl::OUString& _rCommand) throw( RuntimeException ) { { ::osl::MutexGuard aGuard( m_aMutex ); m_aActionCommand = _rCommand; } Reference xButton; query_aggregation( m_xAggregate, xButton); if (xButton.is()) xButton->setActionCommand(_rCommand); } //------------------------------------------------------------------------------ void SAL_CALL OButtonControl::addActionListener(const Reference& _rxListener) throw( RuntimeException ) { m_aActionListeners.addInterface(_rxListener); } //------------------------------------------------------------------------------ void SAL_CALL OButtonControl::removeActionListener(const Reference& _rxListener) throw( RuntimeException ) { m_aActionListeners.removeInterface(_rxListener); } //......................................................................... } // namespace frm //.........................................................................