/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include "ole2uno.hxx" #include "rtl/ustrbuf.hxx" #include "osl/diagnose.h" #include "osl/doublecheckedlocking.h" #include "osl/thread.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "com/sun/star/bridge/oleautomation/NamedArgument.hpp" #include "com/sun/star/bridge/oleautomation/PropertyPutArgument.hpp" #include #include #include #include "jscriptclasses.hxx" #include "oleobjw.hxx" #include "unoobjw.hxx" #include using namespace std; using namespace osl; using namespace cppu; using namespace com::sun::star::script; using namespace com::sun::star::lang; using namespace com::sun::star::bridge; using namespace com::sun::star::bridge::oleautomation; using namespace com::sun::star::bridge::ModelDependent; using namespace ::com::sun::star; #define JSCRIPT_ID_PROPERTY L"_environment" #define JSCRIPT_ID L"jscript" namespace ole_adapter { // key: XInterface pointer created by Invocation Adapter Factory // value: XInterface pointer to the wrapper class. // Entries to the map are made within // Any createOleObjectWrapper(IUnknown* pUnknown, const Type& aType); // Entries are being deleted if the wrapper class's destructor has been // called. // Before UNO object is wrapped to COM object this map is checked // to see if the UNO object is already a wrapper. std::unordered_map AdapterToWrapperMap; // key: XInterface of the wrapper object. // value: XInterface of the Interface created by the Invocation Adapter Factory. // A COM wrapper is responsible for removing the corresponding entry // in AdapterToWrappperMap if it is being destroyed. Because the wrapper does not // know about its adapted interface it uses WrapperToAdapterMap to get the // adapted interface which is then used to locate the entry in AdapterToWrapperMap. std::unordered_map WrapperToAdapterMap; std::unordered_map > ComPtrToWrapperMap; /***************************************************************************** class implementation IUnknownWrapper_Impl *****************************************************************************/ IUnknownWrapper_Impl::IUnknownWrapper_Impl( Reference& xFactory, sal_uInt8 unoWrapperClass, sal_uInt8 comWrapperClass): UnoConversionUtilities( xFactory, unoWrapperClass, comWrapperClass), m_pxIdlClass( NULL), m_eJScript( JScriptUndefined), m_bComTlbIndexInit(false), m_bHasDfltMethod(false), m_bHasDfltProperty(false) { } IUnknownWrapper_Impl::~IUnknownWrapper_Impl() { o2u_attachCurrentThread(); MutexGuard guard(getBridgeMutex()); XInterface * xIntRoot = (OWeakObject *)this; #if OSL_DEBUG_LEVEL > 0 acquire(); // make sure we don't delete us twice because of Reference OSL_ASSERT( Reference( static_cast(this), UNO_QUERY).get() == xIntRoot ); #endif // remove entries in global maps typedef std::unordered_map::iterator _IT; _IT it= WrapperToAdapterMap.find( (sal_uIntPtr) xIntRoot); if( it != WrapperToAdapterMap.end()) { sal_uIntPtr adapter= it->second; AdapterToWrapperMap.erase( adapter); WrapperToAdapterMap.erase( it); } IT_Com it_c= ComPtrToWrapperMap.find( (sal_uIntPtr) m_spUnknown.p); if(it_c != ComPtrToWrapperMap.end()) ComPtrToWrapperMap.erase(it_c); } Any IUnknownWrapper_Impl::queryInterface(const Type& t) throw (RuntimeException) { if (t == cppu::UnoType::get() && !m_bHasDfltMethod ) return Any(); if (t == cppu::UnoType::get() && !m_bHasDfltProperty ) return Any(); if ( ( t == cppu::UnoType::get() || t == cppu::UnoType::get() ) && !m_spDispatch) return Any(); // XDirectInvocation seems to be an oracle replacement for XAutomationInvocation, however it is flawed especially wrt. assumptions about whether to invoke a // Put or Get property, the implementation code has no business guessing that, it's up to the caller to decide that. Worse XDirectInvocation duplicates lots of code. // XAutomationInvocation provides separate calls for put& get // properties. Note: Currently the basic runtime doesn't call put properties directly, it should... after all the basic runtime should know whether it is calling a put or get property. // For the moment for ease of merging we will let the XDirectInvoke and XAuthomationInvocation interfaces stay side by side (and for the moment at least I would prefer the basic // runtime to call XAutomationInvocation instead of XDirectInvoke return WeakImplHelper::queryInterface(t); } Reference SAL_CALL IUnknownWrapper_Impl::getIntrospection() throw (RuntimeException ) { Reference ret; return ret; } Any SAL_CALL IUnknownWrapper_Impl::invokeGetProperty( const OUString& aPropertyName, const Sequence< Any >& aParams, Sequence< sal_Int16 >& aOutParamIndex, Sequence< Any >& aOutParam ) throw (css::lang::IllegalArgumentException, css::script::CannotConvertException, css::reflection::InvocationTargetException, css::uno::RuntimeException) { Any aResult; try { o2u_attachCurrentThread(); ITypeInfo * pInfo = getTypeInfo(); FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc(aPropertyName, & aDescGet, & aDescPut, & aVarDesc); if ( !aDescGet ) { OUString msg("[automation bridge]Property \"" + aPropertyName + "\" is not supported"); throw UnknownPropertyException(msg); } aResult = invokeWithDispIdComTlb( aDescGet, aPropertyName, aParams, aOutParamIndex, aOutParam ); } catch ( const Exception& e ) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::invokeGetProperty ! Message : \n" + e.Message); } return aResult; } Any SAL_CALL IUnknownWrapper_Impl::invokePutProperty( const OUString& aPropertyName, const Sequence< Any >& aParams, Sequence< sal_Int16 >& aOutParamIndex, Sequence< Any >& aOutParam ) throw (css::lang::IllegalArgumentException, css::script::CannotConvertException, css::reflection::InvocationTargetException, css::uno::RuntimeException) { Any aResult; try { o2u_attachCurrentThread(); ITypeInfo * pInfo = getTypeInfo(); FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc(aPropertyName, & aDescGet, & aDescPut, & aVarDesc); if ( !aDescPut ) { OUString msg("[automation bridge]Property \"" + aPropertyName + "\" is not supported"); throw UnknownPropertyException(msg); } aResult = invokeWithDispIdComTlb( aDescPut, aPropertyName, aParams, aOutParamIndex, aOutParam ); } catch ( const Exception& e ) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::invokePutProperty ! Message : \n" + e.Message); } return aResult; } Any SAL_CALL IUnknownWrapper_Impl::invoke( const OUString& aFunctionName, const Sequence< Any >& aParams, Sequence< sal_Int16 >& aOutParamIndex, Sequence< Any >& aOutParam ) throw(IllegalArgumentException, CannotConvertException, InvocationTargetException, RuntimeException) { if ( ! m_spDispatch ) { throw RuntimeException( "[automation bridge] The object does not have an IDispatch interface"); } Any ret; try { o2u_attachCurrentThread(); TypeDescription methodDesc; getMethodInfo(aFunctionName, methodDesc); if( methodDesc.is()) { ret = invokeWithDispIdUnoTlb(aFunctionName, aParams, aOutParamIndex, aOutParam); } else { ret= invokeWithDispIdComTlb( aFunctionName, aParams, aOutParamIndex, aOutParam); } } catch (const IllegalArgumentException &) { throw; } catch (const CannotConvertException &) { throw; } catch (const BridgeRuntimeError & e) { throw RuntimeException(e.message); } catch (const Exception & e) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::invoke ! Message : \n" + e.Message); } catch(...) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::Invoke !"); } return ret; } void SAL_CALL IUnknownWrapper_Impl::setValue( const OUString& aPropertyName, const Any& aValue ) throw(UnknownPropertyException, CannotConvertException, InvocationTargetException, RuntimeException) { if ( ! m_spDispatch ) { throw RuntimeException( "[automation bridge] The object does not have an IDispatch interface"); } try { o2u_attachCurrentThread(); ITypeInfo * pInfo = getTypeInfo(); FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc(aPropertyName, & aDescGet, & aDescPut, & aVarDesc); //check if there is such a property at all or if it is read only if ( ! aDescPut && ! aDescGet && ! aVarDesc) { OUString msg("[automation bridge]Property \"" + aPropertyName + "\" is not supported"); throw UnknownPropertyException(msg); } if ( (! aDescPut && aDescGet) || (aVarDesc && aVarDesc->wVarFlags == VARFLAG_FREADONLY) ) { //read-only OUString msg("[automation bridge] Property " + aPropertyName + " is read-only"); OString sMsg = OUStringToOString(msg, osl_getThreadTextEncoding()); OSL_FAIL(sMsg.getStr()); // ignore silently return; } HRESULT hr= S_OK; DISPPARAMS dispparams; CComVariant varArg; CComVariant varRefArg; CComVariant varResult; ExcepInfo excepinfo; unsigned int uArgErr; // converting UNO value to OLE variant DISPID dispidPut= DISPID_PROPERTYPUT; dispparams.rgdispidNamedArgs = &dispidPut; dispparams.cArgs = 1; dispparams.cNamedArgs = 1; dispparams.rgvarg = & varArg; OSL_ASSERT(aDescPut || aVarDesc); VARTYPE vt = 0; DISPID dispid = 0; INVOKEKIND invkind = INVOKE_PROPERTYPUT; //determine the expected type, dispid, invoke kind (DISPATCH_PROPERTYPUT, //DISPATCH_PROPERTYPUTREF) if (aDescPut) { vt = getElementTypeDesc(& aDescPut->lprgelemdescParam[0].tdesc); dispid = aDescPut->memid; invkind = aDescPut->invkind; } else { vt = getElementTypeDesc( & aVarDesc->elemdescVar.tdesc); dispid = aVarDesc->memid; if (vt == VT_UNKNOWN || vt == VT_DISPATCH || (vt & VT_ARRAY) || (vt & VT_BYREF)) { invkind = INVOKE_PROPERTYPUTREF; } } // convert the uno argument if (vt & VT_BYREF) { anyToVariant( & varRefArg, aValue, ::sal::static_int_cast< VARTYPE, int >( vt ^ VT_BYREF ) ); varArg.vt = vt; if( (vt & VT_TYPEMASK) == VT_VARIANT) varArg.byref = & varRefArg; else if ((vt & VT_TYPEMASK) == VT_DECIMAL) varArg.byref = & varRefArg.decVal; else varArg.byref = & varRefArg.byref; } else { anyToVariant(& varArg, aValue, vt); } // call to IDispatch hr = m_spDispatch->Invoke(dispid, IID_NULL, LOCALE_USER_DEFAULT, ::sal::static_int_cast< WORD, INVOKEKIND >( invkind ), &dispparams, & varResult, & excepinfo, &uArgErr); // lookup error code switch (hr) { case S_OK: break; case DISP_E_BADPARAMCOUNT: throw RuntimeException(); break; case DISP_E_BADVARTYPE: throw RuntimeException(); break; case DISP_E_EXCEPTION: throw InvocationTargetException(); break; case DISP_E_MEMBERNOTFOUND: throw UnknownPropertyException(); break; case DISP_E_NONAMEDARGS: throw RuntimeException(); break; case DISP_E_OVERFLOW: throw CannotConvertException("call to OLE object failed", static_cast( static_cast(this)), TypeClass_UNKNOWN, FailReason::OUT_OF_RANGE, uArgErr); break; case DISP_E_PARAMNOTFOUND: throw IllegalArgumentException("call to OLE object failed", static_cast( static_cast(this)), ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )) ; break; case DISP_E_TYPEMISMATCH: throw CannotConvertException("call to OLE object failed", static_cast( static_cast(this)), TypeClass_UNKNOWN, FailReason::UNKNOWN, ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )); break; case DISP_E_UNKNOWNINTERFACE: throw RuntimeException(); break; case DISP_E_UNKNOWNLCID: throw RuntimeException(); break; case DISP_E_PARAMNOTOPTIONAL: throw CannotConvertException("call to OLE object failed",static_cast( static_cast(this)) , TypeClass_UNKNOWN, FailReason::NO_DEFAULT_AVAILABLE, uArgErr); break; default: throw RuntimeException(); break; } } catch (const CannotConvertException &) { throw; } catch (const UnknownPropertyException &) { throw; } catch (const BridgeRuntimeError& e) { throw RuntimeException(e.message); } catch (const Exception & e) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::setValue ! Message : \n" + e.Message); } catch (...) { throw RuntimeException( "[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::setValue !"); } } Any SAL_CALL IUnknownWrapper_Impl::getValue( const OUString& aPropertyName ) throw(UnknownPropertyException, RuntimeException) { if ( ! m_spDispatch ) { throw RuntimeException( "[automation bridge] The object does not have an IDispatch interface"); } Any ret; try { o2u_attachCurrentThread(); ITypeInfo * pInfo = getTypeInfo(); // I was going to implement an XServiceInfo interface to allow the type // of the automation object to be exposed.. but it seems // from looking at comments in the code that it is possible for // this object to actually wrap an UNO object ( I guess if automation is // used from MSO to create Openoffice objects ) Therefore, those objects // will more than likely already have their own XServiceInfo interface. // Instead here I chose a name that should be illegal both in COM and // UNO ( from an IDL point of view ) therefore I think this is a safe // hack if ( aPropertyName == "$GetTypeName" ) { if ( pInfo && m_sTypeName.getLength() == 0 ) { m_sTypeName = "IDispatch"; CComBSTR sName; if ( SUCCEEDED( pInfo->GetDocumentation( -1, &sName, NULL, NULL, NULL ) ) ) { OUString sTmp( reinterpret_cast(LPCOLESTR(sName))); if ( sTmp.startsWith("_") ) sTmp = sTmp.copy(1); // do we own the memory for pTypeLib, msdn doco is vague // I'll assume we do CComPtr< ITypeLib > pTypeLib; unsigned int index; if ( SUCCEEDED( pInfo->GetContainingTypeLib( &pTypeLib.p, &index )) ) { if ( SUCCEEDED( pTypeLib->GetDocumentation( -1, &sName, NULL, NULL, NULL ) ) ) { OUString sLibName( reinterpret_cast(LPCOLESTR(sName))); m_sTypeName = sLibName.concat( OUString(".") ).concat( sTmp ); } } } } ret <<= m_sTypeName; return ret; } FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc(aPropertyName, & aDescGet, & aDescPut, & aVarDesc); if ( ! aDescGet && ! aDescPut && ! aVarDesc) { //property not found OUString msg("[automation bridge]Property \"" + aPropertyName + "\" is not supported"); throw UnknownPropertyException(msg); } // write-only should not be possible OSL_ASSERT( aDescGet || ! aDescPut); HRESULT hr; DISPPARAMS dispparams = {0, 0, 0, 0}; CComVariant varResult; ExcepInfo excepinfo; unsigned int uArgErr; DISPID dispid; if (aDescGet) dispid = aDescGet->memid; else if (aVarDesc) dispid = aVarDesc->memid; else dispid = aDescPut->memid; hr = m_spDispatch->Invoke(dispid, IID_NULL, LOCALE_USER_DEFAULT, DISPATCH_PROPERTYGET, &dispparams, &varResult, &excepinfo, &uArgErr); // converting return value and out parameter back to UNO if (hr == S_OK) { // If the com object implements uno interfaces then we have // to convert the attribute into the expected type. TypeDescription attrInfo; getAttributeInfo(aPropertyName, attrInfo); if( attrInfo.is() ) variantToAny( &varResult, ret, Type( attrInfo.get()->pWeakRef)); else variantToAny(&varResult, ret); } // lookup error code switch (hr) { case S_OK: break; case DISP_E_BADPARAMCOUNT: case DISP_E_BADVARTYPE: case DISP_E_EXCEPTION: throw RuntimeException(OUString(reinterpret_cast(excepinfo.bstrDescription))); break; case DISP_E_MEMBERNOTFOUND: throw UnknownPropertyException(OUString(reinterpret_cast(excepinfo.bstrDescription))); break; default: throw RuntimeException(OUString(reinterpret_cast(excepinfo.bstrDescription))); break; } } catch ( const UnknownPropertyException& ) { throw; } catch (const BridgeRuntimeError& e) { throw RuntimeException(e.message); } catch (const Exception & e) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::getValue ! Message : \n" + e.Message); } catch (...) { throw RuntimeException( "[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::getValue !"); } return ret; } sal_Bool SAL_CALL IUnknownWrapper_Impl::hasMethod( const OUString& aName ) throw(RuntimeException) { if ( ! m_spDispatch ) { throw RuntimeException( "[automation bridge] The object does not have an IDispatch interface"); } sal_Bool ret = sal_False; try { o2u_attachCurrentThread(); ITypeInfo* pInfo = getTypeInfo(); FuncDesc aDesc(pInfo); getFuncDesc(aName, & aDesc); // Automation properties can have arguments. Those are treated as methods and //are called through XInvocation::invoke. if ( ! aDesc) { FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc( aName, & aDescGet, & aDescPut, & aVarDesc); if ((aDescGet && aDescGet->cParams > 0) || (aDescPut && aDescPut->cParams > 0)) ret = sal_True; } else ret = sal_True; } catch (const BridgeRuntimeError& e) { throw RuntimeException(e.message); } catch (const Exception & e) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::hasMethod ! Message : \n" + e.Message); } catch (...) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::hasMethod !"); } return ret; } sal_Bool SAL_CALL IUnknownWrapper_Impl::hasProperty( const OUString& aName ) throw(RuntimeException) { if ( ! m_spDispatch ) { throw RuntimeException("[automation bridge] The object does not have an " "IDispatch interface"); } sal_Bool ret = sal_False; try { o2u_attachCurrentThread(); ITypeInfo * pInfo = getTypeInfo(); FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc(aName, & aDescGet, & aDescPut, & aVarDesc); // we should probably just check the func kind // basic has been modified to handle properties ( 'get' ) props at // least with parameters // additionally you can call invoke(Get|Set)Property on the bridge // you can determine if a property has parameter is hasMethod // returns true for the name if (aVarDesc || aDescPut || aDescGet ) { ret = sal_True; } } catch (const BridgeRuntimeError& e) { throw RuntimeException(e.message); } catch (const Exception & e) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::hasProperty ! Message : \n" + e.Message); } catch (...) { throw RuntimeException("[automation bridge] unexpected exception in " "IUnknownWrapper_Impl::hasProperty !"); } return ret; } Any SAL_CALL IUnknownWrapper_Impl::createBridge( const Any& modelDepObject, const Sequence< sal_Int8 >& /*aProcessId*/, sal_Int16 sourceModelType, sal_Int16 destModelType ) throw( IllegalArgumentException, RuntimeException) { Any ret; o2u_attachCurrentThread(); if ( (sourceModelType == UNO) && (destModelType == OLE) && (modelDepObject.getValueTypeClass() == TypeClass_INTERFACE) ) { Reference xInt( *(XInterface**) modelDepObject.getValue()); Reference xSelf( (OWeakObject*)this); if (xInt == xSelf) { VARIANT* pVariant = (VARIANT*) CoTaskMemAlloc(sizeof(VARIANT)); VariantInit(pVariant); if (m_bOriginalDispatch == sal_True) { pVariant->vt = VT_DISPATCH; pVariant->pdispVal = m_spDispatch; pVariant->pdispVal->AddRef(); } else { pVariant->vt = VT_UNKNOWN; pVariant->punkVal = m_spUnknown; pVariant->punkVal->AddRef(); } ret.setValue(static_cast(&pVariant), cppu::UnoType::get()); } } return ret; } /** @internal @exception IllegalArgumentException @exception CannotConvertException @exception InvocationTargetException @RuntimeException */ Any IUnknownWrapper_Impl::invokeWithDispIdUnoTlb(const OUString& sFunctionName, const Sequence< Any >& Params, Sequence< sal_Int16 >& OutParamIndex, Sequence< Any >& OutParam) { Any ret; HRESULT hr= S_OK; sal_Int32 parameterCount= Params.getLength(); sal_Int32 outParameterCount= 0; typelib_InterfaceMethodTypeDescription* pMethod= NULL; TypeDescription methodDesc; getMethodInfo(sFunctionName, methodDesc); // We need to know whether the IDispatch is from a JScript object. // Then out and in/out parameters have to be treated differently than // with common COM objects. sal_Bool bJScriptObject= isJScriptObject(); std::unique_ptr sarParams; std::unique_ptr sarParamsRef; CComVariant *pVarParams= NULL; CComVariant *pVarParamsRef= NULL; sal_Bool bConvRet= sal_True; if( methodDesc.is()) { pMethod = (typelib_InterfaceMethodTypeDescription* )methodDesc.get(); parameterCount = pMethod->nParams; // Create the Array for the array being passed in DISPPARAMS // the array also contains the outparameter (but not the values) if( pMethod->nParams > 0) { sarParams.reset(new CComVariant[ parameterCount]); pVarParams = sarParams.get(); } // Create the Array for the out an in/out parameter. These values // are referenced by the VT_BYREF VARIANTs in DISPPARAMS. // We need to find out the number of out and in/out parameter. for( sal_Int32 i=0; i < parameterCount; i++) { if( pMethod->pParams[i].bOut) outParameterCount++; } if( !bJScriptObject) { sarParamsRef.reset(new CComVariant[outParameterCount]); pVarParamsRef = sarParamsRef.get(); // build up the parameters for IDispatch::Invoke sal_Int32 outParamIndex=0; int i = 0; try { for( i= 0; i < parameterCount; i++) { // In parameter if( pMethod->pParams[i].bIn == sal_True && ! pMethod->pParams[i].bOut) { anyToVariant( &pVarParams[parameterCount - i -1], Params.getConstArray()[i]); } // Out parameter + in/out parameter else if( pMethod->pParams[i].bOut == sal_True) { CComVariant var; if(pMethod->pParams[i].bIn) { anyToVariant( & var,Params[i]); pVarParamsRef[outParamIndex] = var; } switch( pMethod->pParams[i].pTypeRef->eTypeClass) { case TypeClass_INTERFACE: case TypeClass_STRUCT: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt= VT_DISPATCH; pVarParamsRef[ outParamIndex].pdispVal= 0; } pVarParams[parameterCount - i -1].vt = VT_DISPATCH | VT_BYREF; pVarParams[parameterCount - i -1].ppdispVal= &pVarParamsRef[outParamIndex].pdispVal; break; case TypeClass_ENUM: case TypeClass_LONG: case TypeClass_UNSIGNED_LONG: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_I4; pVarParamsRef[ outParamIndex].lVal = 0; } pVarParams[parameterCount - i -1].vt = VT_I4 | VT_BYREF; pVarParams[parameterCount - i -1].plVal= &pVarParamsRef[outParamIndex].lVal; break; case TypeClass_SEQUENCE: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_ARRAY| VT_VARIANT; pVarParamsRef[ outParamIndex].parray= NULL; } pVarParams[parameterCount - i -1].vt = VT_ARRAY| VT_BYREF | VT_VARIANT; pVarParams[parameterCount - i -1].pparray= &pVarParamsRef[outParamIndex].parray; break; case TypeClass_ANY: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_EMPTY; pVarParamsRef[ outParamIndex].lVal = 0; } pVarParams[parameterCount - i -1].vt = VT_VARIANT | VT_BYREF; pVarParams[parameterCount - i -1].pvarVal = &pVarParamsRef[outParamIndex]; break; case TypeClass_BOOLEAN: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_BOOL; pVarParamsRef[ outParamIndex].boolVal = 0; } pVarParams[parameterCount - i -1].vt = VT_BOOL| VT_BYREF; pVarParams[parameterCount - i -1].pboolVal = & pVarParamsRef[outParamIndex].boolVal; break; case TypeClass_STRING: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_BSTR; pVarParamsRef[ outParamIndex].bstrVal= 0; } pVarParams[parameterCount - i -1].vt = VT_BSTR| VT_BYREF; pVarParams[parameterCount - i -1].pbstrVal= & pVarParamsRef[outParamIndex].bstrVal; break; case TypeClass_FLOAT: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_R4; pVarParamsRef[ outParamIndex].fltVal= 0; } pVarParams[parameterCount - i -1].vt = VT_R4| VT_BYREF; pVarParams[parameterCount - i -1].pfltVal = & pVarParamsRef[outParamIndex].fltVal; break; case TypeClass_DOUBLE: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_R8; pVarParamsRef[ outParamIndex].dblVal= 0; } pVarParams[parameterCount - i -1].vt = VT_R8| VT_BYREF; pVarParams[parameterCount - i -1].pdblVal= & pVarParamsRef[outParamIndex].dblVal; break; case TypeClass_BYTE: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_UI1; pVarParamsRef[ outParamIndex].bVal= 0; } pVarParams[parameterCount - i -1].vt = VT_UI1| VT_BYREF; pVarParams[parameterCount - i -1].pbVal= & pVarParamsRef[outParamIndex].bVal; break; case TypeClass_CHAR: case TypeClass_SHORT: case TypeClass_UNSIGNED_SHORT: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_I2; pVarParamsRef[ outParamIndex].iVal = 0; } pVarParams[parameterCount - i -1].vt = VT_I2| VT_BYREF; pVarParams[parameterCount - i -1].piVal= & pVarParamsRef[outParamIndex].iVal; break; default: if( ! pMethod->pParams[i].bIn) { pVarParamsRef[ outParamIndex].vt = VT_EMPTY; pVarParamsRef[ outParamIndex].lVal = 0; } pVarParams[parameterCount - i -1].vt = VT_VARIANT | VT_BYREF; pVarParams[parameterCount - i -1].pvarVal = & pVarParamsRef[outParamIndex]; } outParamIndex++; } // end else if } // end for } catch (IllegalArgumentException & e) { e.ArgumentPosition = ::sal::static_int_cast< sal_Int16, int >( i ); throw; } catch (CannotConvertException & e) { e.ArgumentIndex = i; throw; } } else // it is an JScriptObject { int i = 0; try { for( ; i< parameterCount; i++) { // In parameter if( pMethod->pParams[i].bIn == sal_True && ! pMethod->pParams[i].bOut) { anyToVariant( &pVarParams[parameterCount - i -1], Params.getConstArray()[i]); } // Out parameter + in/out parameter else if( pMethod->pParams[i].bOut == sal_True) { CComObject* pParamObject; if( SUCCEEDED( CComObject::CreateInstance( &pParamObject))) { CComPtr pUnk(pParamObject->GetUnknown()); #ifdef __MINGW32__ CComQIPtr pDisp( pUnk); #else CComQIPtr pDisp( pUnk); #endif pVarParams[ parameterCount - i -1].vt= VT_DISPATCH; pVarParams[ parameterCount - i -1].pdispVal= pDisp; pVarParams[ parameterCount - i -1].pdispVal->AddRef(); // if the param is in/out then put the parameter on index 0 if( pMethod->pParams[i].bIn == sal_True ) // in / out { CComVariant varParam; anyToVariant( &varParam, Params.getConstArray()[i]); CComDispatchDriver dispDriver( pDisp); if(FAILED( dispDriver.PutPropertyByName( L"0", &varParam))) throw BridgeRuntimeError( "[automation bridge]IUnknownWrapper_Impl::" "invokeWithDispIdUnoTlb\n" "Could not set property \"0\" for the in/out " "param!"); } } else { throw BridgeRuntimeError( "[automation bridge]IUnknownWrapper_Impl::" "invokeWithDispIdUnoTlb\n" "Could not create out parameter at index: " + OUString::number((sal_Int32) i)); } } } } catch (IllegalArgumentException & e) { e.ArgumentPosition = ::sal::static_int_cast< sal_Int16, int >( i ); throw; } catch (CannotConvertException & e) { e.ArgumentIndex = i; throw; } } } // No type description Available, that is we have to deal with a COM component, // that does not implements UNO interfaces ( IDispatch based) else { //We should not run into this block, because invokeWithDispIdComTlb should //have been called instead. OSL_ASSERT(0); } CComVariant varResult; ExcepInfo excepinfo; unsigned int uArgErr; DISPPARAMS dispparams= { pVarParams, NULL, static_cast(parameterCount), 0}; // Get the DISPID FuncDesc aDesc(getTypeInfo()); getFuncDesc(sFunctionName, & aDesc); // invoking OLE method hr = m_spDispatch->Invoke(aDesc->memid, IID_NULL, LOCALE_USER_DEFAULT, DISPATCH_METHOD, &dispparams, &varResult, &excepinfo, &uArgErr); // converting return value and out parameter back to UNO if (hr == S_OK) { if( outParameterCount && pMethod) { OutParamIndex.realloc( outParameterCount); OutParam.realloc( outParameterCount); sal_Int32 outIndex=0; int i = 0; try { for( ; i < parameterCount; i++) { if( pMethod->pParams[i].bOut ) { OutParamIndex[outIndex]= (sal_Int16) i; Any outAny; if( !bJScriptObject) { variantToAny( &pVarParamsRef[outIndex], outAny, Type(pMethod->pParams[i].pTypeRef), sal_False); OutParam[outIndex++]= outAny; } else //JScriptObject { if( pVarParams[i].vt == VT_DISPATCH) { CComDispatchDriver pDisp( pVarParams[i].pdispVal); if( pDisp) { CComVariant varOut; if( SUCCEEDED( pDisp.GetPropertyByName( L"0", &varOut))) { variantToAny( &varOut, outAny, Type(pMethod->pParams[parameterCount - 1 - i].pTypeRef), sal_False); OutParam[outParameterCount - 1 - outIndex++]= outAny; } else bConvRet= sal_False; } else bConvRet= sal_False; } else bConvRet= sal_False; } } if( !bConvRet) break; } } catch(IllegalArgumentException & e) { e.ArgumentPosition = ::sal::static_int_cast< sal_Int16, int >( i ); throw; } catch(CannotConvertException & e) { e.ArgumentIndex = i; throw; } } // return value, no type information available if ( bConvRet) { try { if( pMethod ) variantToAny(&varResult, ret, Type( pMethod->pReturnTypeRef), sal_False); else variantToAny(&varResult, ret, sal_False); } catch (IllegalArgumentException & e) { e.Message = "[automation bridge]IUnknownWrapper_Impl::invokeWithDispIdUnoTlb\n" "Could not convert return value! \n Message: \n" + e.Message; throw; } catch (CannotConvertException & e) { e.Message = "[automation bridge]IUnknownWrapper_Impl::invokeWithDispIdUnoTlb\n" "Could not convert return value! \n Message: \n" + e.Message; throw; } } } if( !bConvRet) // conversion of return or out parameter failed throw CannotConvertException("Call to COM object failed. Conversion of return or out value failed", Reference( static_cast(this), UNO_QUERY ), TypeClass_UNKNOWN, FailReason::UNKNOWN, 0);// lookup error code // conversion of return or out parameter failed switch (hr) { case S_OK: break; case DISP_E_BADPARAMCOUNT: throw IllegalArgumentException(); break; case DISP_E_BADVARTYPE: throw RuntimeException(); break; case DISP_E_EXCEPTION: throw InvocationTargetException(); break; case DISP_E_MEMBERNOTFOUND: throw IllegalArgumentException(); break; case DISP_E_NONAMEDARGS: throw IllegalArgumentException(); break; case DISP_E_OVERFLOW: throw CannotConvertException("call to OLE object failed", static_cast( static_cast(this)), TypeClass_UNKNOWN, FailReason::OUT_OF_RANGE, uArgErr); break; case DISP_E_PARAMNOTFOUND: throw IllegalArgumentException("call to OLE object failed", static_cast( static_cast(this)), ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )); break; case DISP_E_TYPEMISMATCH: throw CannotConvertException("call to OLE object failed",static_cast( static_cast(this)) , TypeClass_UNKNOWN, FailReason::UNKNOWN, uArgErr); break; case DISP_E_UNKNOWNINTERFACE: throw RuntimeException() ; break; case DISP_E_UNKNOWNLCID: throw RuntimeException() ; break; case DISP_E_PARAMNOTOPTIONAL: throw CannotConvertException("call to OLE object failed", static_cast( static_cast(this)), TypeClass_UNKNOWN, FailReason::NO_DEFAULT_AVAILABLE, uArgErr); break; default: throw RuntimeException(); break; } return ret; } // XInitialization void SAL_CALL IUnknownWrapper_Impl::initialize( const Sequence< Any >& aArguments ) throw(Exception, RuntimeException) { // 1.parameter is IUnknown // 2.parameter is a boolean which indicates if the COM pointer was a IUnknown or IDispatch // 3.parameter is a Sequence o2u_attachCurrentThread(); OSL_ASSERT(aArguments.getLength() == 3); m_spUnknown= *(IUnknown**) aArguments[0].getValue(); #ifdef __MINGW32__ m_spUnknown->QueryInterface(IID_IDispatch, reinterpret_cast( & m_spDispatch.p)); #else m_spUnknown.QueryInterface( & m_spDispatch.p); #endif aArguments[1] >>= m_bOriginalDispatch; aArguments[2] >>= m_seqTypes; ITypeInfo* pType = NULL; try { // a COM object implementation that has no TypeInfo is still a legal COM object; // such objects can at least be transported through UNO using the bridge // so we should allow to create wrappers for them as well pType = getTypeInfo(); } catch( const BridgeRuntimeError& ) {} catch( const Exception& ) {} if ( pType ) { try { // Get Default member CComBSTR defaultMemberName; if ( SUCCEEDED( pType->GetDocumentation(0, &defaultMemberName, 0, 0, 0 ) ) ) { OUString usName(reinterpret_cast(LPCOLESTR(defaultMemberName))); FuncDesc aDescGet(pType); FuncDesc aDescPut(pType); VarDesc aVarDesc(pType); // see if this is a property first ( more likely to be a property then a method ) getPropDesc( usName, & aDescGet, & aDescPut, & aVarDesc); if ( !aDescGet && !aDescPut ) { getFuncDesc( usName, &aDescGet ); if ( !aDescGet ) throw BridgeRuntimeError( "[automation bridge]IUnknownWrapper_Impl::initialize() Failed to get Function or Property desc. for " + usName ); } // now for some funny heuristics to make basic understand what to do // a single aDescGet ( that doesn't take any params ) would be // a read only ( defaultmember ) property e.g. this object // should implement XDefaultProperty // a single aDescGet ( that *does* ) take params is basically a // default method e.g. implement XDefaultMethod // a DescPut ( I guess we only really support a default param with '1' param ) as a setValue ( but I guess we can leave it through, the object will fail if we don't get it right anyway ) if ( aDescPut || ( aDescGet && aDescGet->cParams == 0 ) ) m_bHasDfltProperty = true; if ( aDescGet->cParams > 0 ) m_bHasDfltMethod = true; if ( m_bHasDfltProperty || m_bHasDfltMethod ) m_sDefaultMember = usName; } } catch ( const BridgeRuntimeError & e ) { throw RuntimeException( e.message ); } catch( const Exception& e ) { throw RuntimeException( "[automation bridge] unexpected exception in IUnknownWrapper_Impl::initialiase() error message: \n" + e.Message ); } } } // XDirectInvocation uno::Any SAL_CALL IUnknownWrapper_Impl::directInvoke( const OUString& aName, const uno::Sequence< uno::Any >& aParams ) throw (lang::IllegalArgumentException, script::CannotConvertException, reflection::InvocationTargetException, uno::RuntimeException) { Any aResult; if ( !m_spDispatch ) { throw RuntimeException( "[automation bridge] The object does not have an IDispatch interface"); } o2u_attachCurrentThread(); DISPID dispid; if ( !getDispid( aName, &dispid ) ) throw IllegalArgumentException( "[automation bridge] The object does not have a function or property " + aName, Reference(), 0); CComVariant varResult; ExcepInfo excepinfo; unsigned int uArgErr = 0; INVOKEKIND pInvkinds[2]; pInvkinds[0] = INVOKE_FUNC; pInvkinds[1] = aParams.getLength() ? INVOKE_PROPERTYPUT : INVOKE_PROPERTYGET; HRESULT hInvRes = E_FAIL; // try Invoke first, if it does not work, try put/get property for ( sal_Int32 nStep = 0; FAILED( hInvRes ) && nStep < 2; nStep++ ) { DISPPARAMS dispparams = {NULL, NULL, 0, 0}; std::unique_ptr arDispidNamedArgs; std::unique_ptr ptrArgs; std::unique_ptr ptrRefArgs; // referenced arguments CComVariant * arArgs = NULL; CComVariant * arRefArgs = NULL; dispparams.cArgs = aParams.getLength(); // Determine the number of named arguments for ( sal_Int32 nInd = 0; nInd < aParams.getLength(); nInd++ ) if ( aParams[nInd].getValueType() == cppu::UnoType::get() ) dispparams.cNamedArgs ++; // fill the named arguments if ( dispparams.cNamedArgs > 0 && !( dispparams.cNamedArgs == 1 && pInvkinds[nStep] == INVOKE_PROPERTYPUT ) ) { int nSizeAr = dispparams.cNamedArgs + 1; if ( pInvkinds[nStep] == INVOKE_PROPERTYPUT ) nSizeAr = dispparams.cNamedArgs; std::unique_ptr saNames(new OLECHAR*[nSizeAr]); OLECHAR ** pNames = saNames.get(); pNames[0] = const_cast(reinterpret_cast(aName.getStr())); int cNamedArg = 0; for ( size_t nInd = 0; nInd < dispparams.cArgs; nInd++ ) { if ( aParams[nInd].getValueType() == cppu::UnoType::get()) { const NamedArgument& arg = *(NamedArgument const*)aParams[nInd].getValue(); //We put the parameter names in reverse order into the array, //so we can use the DISPID array for DISPPARAMS::rgdispidNamedArgs //The first name in the array is the method name pNames[nSizeAr - 1 - cNamedArg++] = const_cast(reinterpret_cast(arg.Name.getStr())); } } arDispidNamedArgs.reset( new DISPID[nSizeAr] ); HRESULT hr = getTypeInfo()->GetIDsOfNames( pNames, nSizeAr, arDispidNamedArgs.get() ); if ( hr == E_NOTIMPL ) hr = m_spDispatch->GetIDsOfNames(IID_NULL, pNames, nSizeAr, LOCALE_USER_DEFAULT, arDispidNamedArgs.get() ); if ( SUCCEEDED( hr ) ) { if ( pInvkinds[nStep] == DISPATCH_PROPERTYPUT ) { DISPID* arIDs = arDispidNamedArgs.get(); arIDs[0] = DISPID_PROPERTYPUT; dispparams.rgdispidNamedArgs = arIDs; } else { DISPID* arIDs = arDispidNamedArgs.get(); dispparams.rgdispidNamedArgs = & arIDs[1]; } } else if (hr == DISP_E_UNKNOWNNAME) { throw IllegalArgumentException( "[automation bridge]One of the named arguments is wrong!", Reference(), 0); } else { throw InvocationTargetException( "[automation bridge] ITypeInfo::GetIDsOfNames returned error " + OUString::number((sal_Int32) hr, 16), Reference(), Any()); } } //Convert arguments ptrArgs.reset(new CComVariant[dispparams.cArgs]); ptrRefArgs.reset(new CComVariant[dispparams.cArgs]); arArgs = ptrArgs.get(); arRefArgs = ptrRefArgs.get(); sal_Int32 nInd = 0; try { sal_Int32 revIndex = 0; for ( nInd = 0; nInd < sal_Int32(dispparams.cArgs); nInd++) { revIndex = dispparams.cArgs - nInd - 1; arRefArgs[revIndex].byref = 0; Any anyArg; if ( nInd < aParams.getLength() ) anyArg = aParams.getConstArray()[nInd]; // Property Put arguments if ( anyArg.getValueType() == cppu::UnoType::get() ) { PropertyPutArgument arg; anyArg >>= arg; anyArg <<= arg.Value; } // named argument if (anyArg.getValueType() == cppu::UnoType::get()) { NamedArgument aNamedArgument; anyArg >>= aNamedArgument; anyArg <<= aNamedArgument.Value; } if ( nInd < aParams.getLength() && anyArg.getValueTypeClass() != TypeClass_VOID ) { anyToVariant( &arArgs[revIndex], anyArg, VT_VARIANT ); } else { arArgs[revIndex].vt = VT_ERROR; arArgs[revIndex].scode = DISP_E_PARAMNOTFOUND; } } } catch (IllegalArgumentException & e) { e.ArgumentPosition = ::sal::static_int_cast< sal_Int16, sal_Int32 >( nInd ); throw; } catch (CannotConvertException & e) { e.ArgumentIndex = nInd; throw; } dispparams.rgvarg = arArgs; // invoking OLE method DWORD localeId = LOCALE_USER_DEFAULT; hInvRes = m_spDispatch->Invoke( dispid, IID_NULL, localeId, ::sal::static_int_cast< WORD, INVOKEKIND >( pInvkinds[nStep] ), &dispparams, &varResult, &excepinfo, &uArgErr); } // converting return value and out parameter back to UNO if ( SUCCEEDED( hInvRes ) ) variantToAny( &varResult, aResult, sal_False ); else { // map error codes to exceptions OUString message; switch ( hInvRes ) { case S_OK: break; case DISP_E_BADPARAMCOUNT: throw IllegalArgumentException("[automation bridge] Wrong " "number of arguments. Object returned DISP_E_BADPARAMCOUNT.", 0, 0); break; case DISP_E_BADVARTYPE: throw RuntimeException("[automation bridge] One or more " "arguments have the wrong type. Object returned " "DISP_E_BADVARTYPE.", 0); break; case DISP_E_EXCEPTION: message = "[automation bridge]: "; message += OUString(reinterpret_cast(excepinfo.bstrDescription), ::SysStringLen(excepinfo.bstrDescription)); throw InvocationTargetException(message, Reference(), Any()); break; case DISP_E_MEMBERNOTFOUND: message = "[automation bridge]: A function with the name \"" + aName + "\" is not supported. Object returned " "DISP_E_MEMBERNOTFOUND."; throw IllegalArgumentException(message, 0, 0); break; case DISP_E_NONAMEDARGS: throw IllegalArgumentException("[automation bridge] Object " "returned DISP_E_NONAMEDARGS",0, ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )); break; case DISP_E_OVERFLOW: throw CannotConvertException("[automation bridge] Call failed.", static_cast( static_cast(this)), TypeClass_UNKNOWN, FailReason::OUT_OF_RANGE, uArgErr); break; case DISP_E_PARAMNOTFOUND: throw IllegalArgumentException("[automation bridge]Call failed." "Object returned DISP_E_PARAMNOTFOUND.", 0, ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )); break; case DISP_E_TYPEMISMATCH: throw CannotConvertException("[automation bridge] Call failed. " "Object returned DISP_E_TYPEMISMATCH", static_cast( static_cast(this)) , TypeClass_UNKNOWN, FailReason::UNKNOWN, uArgErr); break; case DISP_E_UNKNOWNINTERFACE: throw RuntimeException("[automation bridge] Call failed. " "Object returned DISP_E_UNKNOWNINTERFACE.",0); break; case DISP_E_UNKNOWNLCID: throw RuntimeException("[automation bridge] Call failed. " "Object returned DISP_E_UNKNOWNLCID.",0); break; case DISP_E_PARAMNOTOPTIONAL: throw CannotConvertException("[automation bridge] Call failed." "Object returned DISP_E_PARAMNOTOPTIONAL", static_cast(static_cast(this)), TypeClass_UNKNOWN, FailReason::NO_DEFAULT_AVAILABLE, uArgErr); break; default: throw RuntimeException(); break; } } return aResult; } sal_Bool SAL_CALL IUnknownWrapper_Impl::hasMember( const OUString& aName ) throw (uno::RuntimeException) { if ( ! m_spDispatch ) { throw RuntimeException( "[automation bridge] The object does not have an IDispatch interface"); } o2u_attachCurrentThread(); DISPID dispid; return getDispid( aName, &dispid ); } // UnoConversionUtilities -------------------------------------------------------------------------------- Reference< XInterface > IUnknownWrapper_Impl::createUnoWrapperInstance() { if( m_nUnoWrapperClass == INTERFACE_OLE_WRAPPER_IMPL) { Reference xWeak= static_cast( new InterfaceOleWrapper_Impl( m_smgr, m_nUnoWrapperClass, m_nComWrapperClass)); return Reference( xWeak, UNO_QUERY); } else if( m_nUnoWrapperClass == UNO_OBJECT_WRAPPER_REMOTE_OPT) { Reference xWeak= static_cast( new UnoObjectWrapperRemoteOpt( m_smgr, m_nUnoWrapperClass, m_nComWrapperClass)); return Reference( xWeak, UNO_QUERY); } else return Reference(); } Reference IUnknownWrapper_Impl::createComWrapperInstance() { Reference xWeak= static_cast( new IUnknownWrapper_Impl( m_smgr, m_nUnoWrapperClass, m_nComWrapperClass)); return Reference( xWeak, UNO_QUERY); } void IUnknownWrapper_Impl::getMethodInfo(const OUString& sName, TypeDescription& methodInfo) { TypeDescription desc= getInterfaceMemberDescOfCurrentCall(sName); if( desc.is()) { typelib_TypeDescription* pMember= desc.get(); if( pMember->eTypeClass == typelib_TypeClass_INTERFACE_METHOD ) methodInfo= pMember; } } void IUnknownWrapper_Impl::getAttributeInfo(const OUString& sName, TypeDescription& attributeInfo) { TypeDescription desc= getInterfaceMemberDescOfCurrentCall(sName); if( desc.is()) { typelib_TypeDescription* pMember= desc.get(); if( pMember->eTypeClass == typelib_TypeClass_INTERFACE_ATTRIBUTE ) { attributeInfo= ((typelib_InterfaceAttributeTypeDescription*)pMember)->pAttributeTypeRef; } } } TypeDescription IUnknownWrapper_Impl::getInterfaceMemberDescOfCurrentCall(const OUString& sName) { TypeDescription ret; for( sal_Int32 i=0; i < m_seqTypes.getLength(); i++) { TypeDescription _curDesc( m_seqTypes[i]); _curDesc.makeComplete(); typelib_InterfaceTypeDescription * pInterface= (typelib_InterfaceTypeDescription*) _curDesc.get(); if( pInterface) { typelib_InterfaceMemberTypeDescription* pMember= NULL; //find the member description of the current call for( int j=0; j < pInterface->nAllMembers; j++) { typelib_TypeDescriptionReference* pTypeRefMember = pInterface->ppAllMembers[j]; typelib_TypeDescription* pDescMember= NULL; TYPELIB_DANGER_GET( &pDescMember, pTypeRefMember); typelib_InterfaceMemberTypeDescription* pInterfaceMember= (typelib_InterfaceMemberTypeDescription*) pDescMember; if( OUString( pInterfaceMember->pMemberName) == sName) { pMember= pInterfaceMember; break; } TYPELIB_DANGER_RELEASE( pDescMember); } if( pMember) { ret= (typelib_TypeDescription*)pMember; TYPELIB_DANGER_RELEASE( (typelib_TypeDescription*)pMember); } } if( ret.is()) break; } return ret; } sal_Bool IUnknownWrapper_Impl::isJScriptObject() { if( m_eJScript == JScriptUndefined) { CComDispatchDriver disp( m_spDispatch); if( disp) { CComVariant result; if( SUCCEEDED( disp.GetPropertyByName( JSCRIPT_ID_PROPERTY, &result))) { if(result.vt == VT_BSTR) { CComBSTR name( result.bstrVal); name.ToLower(); if( name == CComBSTR(JSCRIPT_ID)) m_eJScript= IsJScript; } } } if( m_eJScript == JScriptUndefined) m_eJScript= NoJScript; } return m_eJScript == NoJScript ? sal_False : sal_True; } /** @internal The function ultimately calls IDispatch::Invoke on the wrapped COM object. The COM object does not implement UNO Interfaces ( via IDispatch). This is the case when the OleObjectFactory service has been used to create a component. @exception IllegalArgumentException @exception CannotConvertException @InvocationTargetException @RuntimeException @BridgeRuntimeError */ Any IUnknownWrapper_Impl::invokeWithDispIdComTlb(const OUString& sFuncName, const Sequence< Any >& Params, Sequence< sal_Int16 >& OutParamIndex, Sequence< Any >& OutParam) { // Get type info for the call. It can be a method call or property put or // property get operation. FuncDesc aFuncDesc(getTypeInfo()); getFuncDescForInvoke(sFuncName, Params, & aFuncDesc); return invokeWithDispIdComTlb( aFuncDesc, sFuncName, Params, OutParamIndex, OutParam ); } Any IUnknownWrapper_Impl::invokeWithDispIdComTlb(FuncDesc& aFuncDesc, const OUString& sFuncName, const Sequence< Any >& Params, Sequence< sal_Int16 >& OutParamIndex, Sequence< Any >& OutParam) { Any ret; HRESULT result; DISPPARAMS dispparams = {NULL, NULL, 0, 0}; CComVariant varResult; ExcepInfo excepinfo; unsigned int uArgErr; sal_Int32 i = 0; sal_Int32 nUnoArgs = Params.getLength(); DISPID idPropertyPut = DISPID_PROPERTYPUT; std::unique_ptr arDispidNamedArgs; std::unique_ptr ptrArgs; std::unique_ptr ptrRefArgs; // referenced arguments CComVariant * arArgs = NULL; CComVariant * arRefArgs = NULL; sal_Int32 revIndex = 0; //Set the array of DISPIDs for named args if it is a property put operation. //If there are other named arguments another array is set later on. if (aFuncDesc->invkind == INVOKE_PROPERTYPUT || aFuncDesc->invkind == INVOKE_PROPERTYPUTREF) dispparams.rgdispidNamedArgs = & idPropertyPut; //Determine the number of named arguments for (int iParam = 0; iParam < nUnoArgs; iParam ++) { const Any & curArg = Params[iParam]; if (curArg.getValueType() == cppu::UnoType::get()) dispparams.cNamedArgs ++; } //In a property put operation a property value is a named argument (DISPID_PROPERTYPUT). //Therefore the number of named arguments is increased by one. //Although named, the argument is not named in an actual language, such as Basic, //therefore it is never a com.sun.star.bridge.oleautomation.NamedArgument if (aFuncDesc->invkind == DISPATCH_PROPERTYPUT || aFuncDesc->invkind == DISPATCH_PROPERTYPUTREF) dispparams.cNamedArgs ++; //Determine the number of all arguments and named arguments if (aFuncDesc->cParamsOpt == -1) { //Attribute vararg is set on this method. "Unlimited" number of args //supported. There can be no optional or defaultvalue on any of the arguments. dispparams.cArgs = nUnoArgs; } else { //If there are named arguments, then the dispparams.cArgs //is the number of supplied args, otherwise it is the expected number. if (dispparams.cNamedArgs) dispparams.cArgs = nUnoArgs; else dispparams.cArgs = aFuncDesc->cParams; } //check if there are not to many arguments supplied if (::sal::static_int_cast< sal_uInt32, int >( nUnoArgs ) > dispparams.cArgs) { OUStringBuffer buf(256); buf.appendAscii("[automation bridge] There are too many arguments for this method"); throw IllegalArgumentException( buf.makeStringAndClear(), Reference(), (sal_Int16) dispparams.cArgs); } //Set up the array of DISPIDs (DISPPARAMS::rgdispidNamedArgs) //for the named arguments. //If there is only one named arg and if it is because of a property put //operation, then we need not set up the DISPID array. if (dispparams.cNamedArgs > 0 && ! (dispparams.cNamedArgs == 1 && (aFuncDesc->invkind == INVOKE_PROPERTYPUT || aFuncDesc->invkind == INVOKE_PROPERTYPUTREF))) { //set up an array containing the member and parameter names //which is then used in ITypeInfo::GetIDsOfNames //First determine the size of the array of names which is passed to //ITypeInfo::GetIDsOfNames. It must hold the method names + the named //args. int nSizeAr = dispparams.cNamedArgs + 1; if (aFuncDesc->invkind == INVOKE_PROPERTYPUT || aFuncDesc->invkind == INVOKE_PROPERTYPUTREF) { nSizeAr = dispparams.cNamedArgs; //counts the DISID_PROPERTYPUT } std::unique_ptr saNames(new OLECHAR*[nSizeAr]); OLECHAR ** arNames = saNames.get(); arNames[0] = const_cast(reinterpret_cast(sFuncName.getStr())); int cNamedArg = 0; for (size_t iParams = 0; iParams < dispparams.cArgs; iParams ++) { const Any & curArg = Params[iParams]; if (curArg.getValueType() == cppu::UnoType::get()) { const NamedArgument& arg = *(NamedArgument const*) curArg.getValue(); //We put the parameter names in reverse order into the array, //so we can use the DISPID array for DISPPARAMS::rgdispidNamedArgs //The first name in the array is the method name arNames[nSizeAr - 1 - cNamedArg++] = const_cast(reinterpret_cast(arg.Name.getStr())); } } //Prepare the array of DISPIDs for ITypeInfo::GetIDsOfNames //it must be big enough to contain the DISPIDs of the member + parameters arDispidNamedArgs.reset(new DISPID[nSizeAr]); HRESULT hr = getTypeInfo()->GetIDsOfNames(arNames, nSizeAr, arDispidNamedArgs.get()); if ( hr == E_NOTIMPL ) hr = m_spDispatch->GetIDsOfNames(IID_NULL, arNames, nSizeAr, LOCALE_USER_DEFAULT, arDispidNamedArgs.get() ); if (hr == S_OK) { // In a "property put" operation, the property value is a named param with the //special DISPID DISPID_PROPERTYPUT if (aFuncDesc->invkind == DISPATCH_PROPERTYPUT || aFuncDesc->invkind == DISPATCH_PROPERTYPUTREF) { //Element at index 0 in the DISPID array must be DISPID_PROPERTYPUT //The first item in the array arDispidNamedArgs is the DISPID for //the method. We replace it with DISPID_PROPERTYPUT. DISPID* arIDs = arDispidNamedArgs.get(); arIDs[0] = DISPID_PROPERTYPUT; dispparams.rgdispidNamedArgs = arIDs; } else { //The first item in the array arDispidNamedArgs is the DISPID for //the method. It must be removed DISPID* arIDs = arDispidNamedArgs.get(); dispparams.rgdispidNamedArgs = & arIDs[1]; } } else if (hr == DISP_E_UNKNOWNNAME) { throw IllegalArgumentException( "[automation bridge]One of the named arguments is wrong!", Reference(), 0); } else { throw InvocationTargetException( "[automation bridge] ITypeInfo::GetIDsOfNames returned error " + OUString::number((sal_Int32) hr, 16), Reference(), Any()); } } //Convert arguments ptrArgs.reset(new CComVariant[dispparams.cArgs]); ptrRefArgs.reset(new CComVariant[dispparams.cArgs]); arArgs = ptrArgs.get(); arRefArgs = ptrRefArgs.get(); try { for (i = 0; i < (sal_Int32) dispparams.cArgs; i++) { revIndex= dispparams.cArgs - i -1; arRefArgs[revIndex].byref=0; Any anyArg; if ( i < nUnoArgs) anyArg= Params.getConstArray()[i]; unsigned short paramFlags = PARAMFLAG_FOPT | PARAMFLAG_FIN; VARTYPE varType = VT_VARIANT; if (aFuncDesc->cParamsOpt != -1 || aFuncDesc->cParams != (i + 1)) { paramFlags = aFuncDesc->lprgelemdescParam[i].paramdesc.wParamFlags; varType = getElementTypeDesc(&aFuncDesc->lprgelemdescParam[i].tdesc); } // Make sure that there is a UNO parameter for every // expected parameter. If there is no UNO parameter where the // called function expects one, then it must be optional. Otherwise // it's a UNO programming error. if (i >= nUnoArgs && !(paramFlags & PARAMFLAG_FOPT)) { OUStringBuffer buf(256); buf.appendAscii("ole automation bridge: The called function expects an argument at" "position: "); //a different number of arguments")), buf.append(OUString::number((sal_Int32) i)); buf.appendAscii(" (index starting at 0)."); throw IllegalArgumentException( buf.makeStringAndClear(), Reference(), (sal_Int16) i); } // Property Put arguments if (anyArg.getValueType() == cppu::UnoType::get()) { PropertyPutArgument arg; anyArg >>= arg; anyArg <<= arg.Value; } // named argument if (anyArg.getValueType() == cppu::UnoType::get()) { NamedArgument aNamedArgument; anyArg >>= aNamedArgument; anyArg <<= aNamedArgument.Value; } // out param if (paramFlags & PARAMFLAG_FOUT && ! (paramFlags & PARAMFLAG_FIN) ) { VARTYPE type = ::sal::static_int_cast< VARTYPE, int >( varType ^ VT_BYREF ); if (i < nUnoArgs) { arRefArgs[revIndex].vt= type; } else { //optional arg arRefArgs[revIndex].vt = VT_ERROR; arRefArgs[revIndex].scode = DISP_E_PARAMNOTFOUND; } if( type == VT_VARIANT ) { arArgs[revIndex].vt= VT_VARIANT | VT_BYREF; arArgs[revIndex].byref= &arRefArgs[revIndex]; } else { arArgs[revIndex].vt= varType; if (type == VT_DECIMAL) arArgs[revIndex].byref= & arRefArgs[revIndex].decVal; else arArgs[revIndex].byref= & arRefArgs[revIndex].byref; } } // in/out + in byref params else if (varType & VT_BYREF) { VARTYPE type = ::sal::static_int_cast< VARTYPE, int >( varType ^ VT_BYREF ); CComVariant var; if (i < nUnoArgs && anyArg.getValueTypeClass() != TypeClass_VOID) { anyToVariant( & arRefArgs[revIndex], anyArg, type); } else if (paramFlags & PARAMFLAG_FHASDEFAULT) { //optional arg with default VariantCopy( & arRefArgs[revIndex], & aFuncDesc->lprgelemdescParam[i].paramdesc. pparamdescex->varDefaultValue); } else { //optional arg //e.g: call func(x) in basic : func() ' no arg supplied OSL_ASSERT(paramFlags & PARAMFLAG_FOPT); arRefArgs[revIndex].vt = VT_ERROR; arRefArgs[revIndex].scode = DISP_E_PARAMNOTFOUND; } // Set the converted arguments in the array which will be // DISPPARAMS::rgvarg // byref arg VT_XXX |VT_BYREF arArgs[revIndex].vt = varType; if (revIndex == 0 && aFuncDesc->invkind == INVOKE_PROPERTYPUT) { arArgs[revIndex] = arRefArgs[revIndex]; } else if (type == VT_DECIMAL) { arArgs[revIndex].byref= & arRefArgs[revIndex].decVal; } else if (type == VT_VARIANT) { if ( ! (paramFlags & PARAMFLAG_FOUT)) arArgs[revIndex] = arRefArgs[revIndex]; else arArgs[revIndex].byref = & arRefArgs[revIndex]; } else { arArgs[revIndex].byref = & arRefArgs[revIndex].byref; arArgs[revIndex].vt = ::sal::static_int_cast< VARTYPE, int >( arRefArgs[revIndex].vt | VT_BYREF ); } } // in parameter no VT_BYREF except for array, interfaces else { // void any stands for optional param if (i < nUnoArgs && anyArg.getValueTypeClass() != TypeClass_VOID) { anyToVariant( & arArgs[revIndex], anyArg, varType); } //optional arg but no void any supplied //Basic: obj.func() ' first parameter left out because it is optional else if (paramFlags & PARAMFLAG_FHASDEFAULT) { //optional arg with default either as direct arg : VT_XXX or VariantCopy( & arArgs[revIndex], & aFuncDesc->lprgelemdescParam[i].paramdesc. pparamdescex->varDefaultValue); } else if (paramFlags & PARAMFLAG_FOPT) { arArgs[revIndex].vt = VT_ERROR; arArgs[revIndex].scode = DISP_E_PARAMNOTFOUND; } else { arArgs[revIndex].vt = VT_EMPTY; arArgs[revIndex].lVal = 0; } } } } catch (IllegalArgumentException & e) { e.ArgumentPosition = ::sal::static_int_cast< sal_Int16, sal_Int32 >( i ); throw; } catch (CannotConvertException & e) { e.ArgumentIndex = i; throw; } dispparams.rgvarg= arArgs; // invoking OLE method DWORD localeId = LOCALE_USER_DEFAULT; result = m_spDispatch->Invoke(aFuncDesc->memid, IID_NULL, localeId, ::sal::static_int_cast< WORD, INVOKEKIND >( aFuncDesc->invkind ), &dispparams, &varResult, &excepinfo, &uArgErr); // converting return value and out parameter back to UNO if (result == S_OK) { // allocate space for the out param Sequence and indices Sequence int outParamsCount= 0; // includes in/out parameter for (int j = 0; j < aFuncDesc->cParams; j++) { if (aFuncDesc->lprgelemdescParam[j].paramdesc.wParamFlags & PARAMFLAG_FOUT) outParamsCount++; } OutParamIndex.realloc(outParamsCount); OutParam.realloc(outParamsCount); // Convert out params if (outParamsCount) { int outParamIndex=0; for (int paramIndex = 0; paramIndex < nUnoArgs; paramIndex ++) { //Determine the index within the method signature int realParamIndex = paramIndex; int revParamIndex = dispparams.cArgs - paramIndex - 1; if (Params[paramIndex].getValueType() == cppu::UnoType::get()) { //dispparams.rgdispidNamedArgs contains the mapping from index //of named args list to index of parameter list realParamIndex = dispparams.rgdispidNamedArgs[revParamIndex]; } // no named arg, always come before named args if (! (aFuncDesc->lprgelemdescParam[realParamIndex].paramdesc.wParamFlags & PARAMFLAG_FOUT)) continue; Any outAny; // variantToAny is called with the "reduce range" parameter set to sal_False. // That causes VT_I4 values not to be converted down to a "lower" type. That // feature exist for JScript only because it only uses VT_I4 for integer types. try { variantToAny( & arRefArgs[revParamIndex], outAny, sal_False ); } catch (IllegalArgumentException & e) { e.ArgumentPosition = (sal_Int16)paramIndex; throw; } catch (CannotConvertException & e) { e.ArgumentIndex = paramIndex; throw; } OutParam[outParamIndex] = outAny; OutParamIndex[outParamIndex] = ::sal::static_int_cast< sal_Int16, int >( paramIndex ); outParamIndex++; } OutParam.realloc(outParamIndex); OutParamIndex.realloc(outParamIndex); } // Return value variantToAny(&varResult, ret, sal_False); } // map error codes to exceptions OUString message; switch (result) { case S_OK: break; case DISP_E_BADPARAMCOUNT: throw IllegalArgumentException("[automation bridge] Wrong " "number of arguments. Object returned DISP_E_BADPARAMCOUNT.", 0, 0); break; case DISP_E_BADVARTYPE: throw RuntimeException("[automation bridge] One or more " "arguments have the wrong type. Object returned " "DISP_E_BADVARTYPE.", 0); break; case DISP_E_EXCEPTION: message = "[automation bridge]: "; message += OUString(reinterpret_cast(excepinfo.bstrDescription), ::SysStringLen(excepinfo.bstrDescription)); throw InvocationTargetException(message, Reference(), Any()); break; case DISP_E_MEMBERNOTFOUND: message = "[automation bridge]: A function with the name \"" + sFuncName + "\" is not supported. Object returned " "DISP_E_MEMBERNOTFOUND."; throw IllegalArgumentException(message, 0, 0); break; case DISP_E_NONAMEDARGS: throw IllegalArgumentException("[automation bridge] Object " "returned DISP_E_NONAMEDARGS",0, ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )); break; case DISP_E_OVERFLOW: throw CannotConvertException("[automation bridge] Call failed.", static_cast( static_cast(this)), TypeClass_UNKNOWN, FailReason::OUT_OF_RANGE, uArgErr); break; case DISP_E_PARAMNOTFOUND: throw IllegalArgumentException("[automation bridge]Call failed." "Object returned DISP_E_PARAMNOTFOUND.", 0, ::sal::static_int_cast< sal_Int16, unsigned int >( uArgErr )); break; case DISP_E_TYPEMISMATCH: throw CannotConvertException("[automation bridge] Call failed. " "Object returned DISP_E_TYPEMISMATCH", static_cast( static_cast(this)) , TypeClass_UNKNOWN, FailReason::UNKNOWN, uArgErr); break; case DISP_E_UNKNOWNINTERFACE: throw RuntimeException("[automation bridge] Call failed. " "Object returned DISP_E_UNKNOWNINTERFACE.",0); break; case DISP_E_UNKNOWNLCID: throw RuntimeException("[automation bridge] Call failed. " "Object returned DISP_E_UNKNOWNLCID.",0); break; case DISP_E_PARAMNOTOPTIONAL: throw CannotConvertException("[automation bridge] Call failed." "Object returned DISP_E_PARAMNOTOPTIONAL", static_cast(static_cast(this)), TypeClass_UNKNOWN, FailReason::NO_DEFAULT_AVAILABLE, uArgErr); break; default: throw RuntimeException(); break; } return ret; } void IUnknownWrapper_Impl::getFuncDescForInvoke(const OUString & sFuncName, const Sequence & seqArgs, FUNCDESC** pFuncDesc) { int nUnoArgs = seqArgs.getLength(); const Any * arArgs = seqArgs.getConstArray(); ITypeInfo* pInfo = getTypeInfo(); //If the last of the positional arguments is a PropertyPutArgument //then obtain the type info for the property put operation. //The property value is always the last argument, in a positional argument list //or in a list of named arguments. A PropertyPutArgument is actually a named argument //hence it must not be put in an extra NamedArgument structure if (nUnoArgs > 0 && arArgs[nUnoArgs - 1].getValueType() == cppu::UnoType::get()) { // DISPATCH_PROPERTYPUT FuncDesc aDescGet(pInfo); FuncDesc aDescPut(pInfo); VarDesc aVarDesc(pInfo); getPropDesc(sFuncName, & aDescGet, & aDescPut, & aVarDesc); if ( ! aDescPut) { throw IllegalArgumentException( "[automation bridge] The object does not have a writeable property: " + sFuncName, Reference(), 0); } *pFuncDesc = aDescPut.Detach(); } else { // DISPATCH_METHOD FuncDesc aFuncDesc(pInfo); getFuncDesc(sFuncName, & aFuncDesc); if ( ! aFuncDesc) { // Fallback: DISPATCH_PROPERTYGET can mostly be called as // DISPATCH_METHOD ITypeInfo * pTypeInfo = getTypeInfo(); FuncDesc aDescPut(pTypeInfo); VarDesc aVarDesc(pTypeInfo); getPropDesc(sFuncName, & aFuncDesc, & aDescPut, & aVarDesc); if ( ! aFuncDesc ) { throw IllegalArgumentException( "[automation bridge] The object does not have a function" "or readable property \"" + sFuncName, Reference(), 0); } } *pFuncDesc = aFuncDesc.Detach(); } } bool IUnknownWrapper_Impl::getDispid(const OUString& sFuncName, DISPID * id) { OSL_ASSERT(m_spDispatch); LPOLESTR lpsz = const_cast (reinterpret_cast(sFuncName.getStr())); HRESULT hr = m_spDispatch->GetIDsOfNames(IID_NULL, &lpsz, 1, LOCALE_USER_DEFAULT, id); return hr == S_OK; } void IUnknownWrapper_Impl::getFuncDesc(const OUString & sFuncName, FUNCDESC ** pFuncDesc) { OSL_ASSERT( * pFuncDesc == 0); buildComTlbIndex(); typedef TLBFuncIndexMap::const_iterator cit; //We assume there is only one entry with the function name. A property //would have two entries. cit itIndex= m_mapComFunc.find(sFuncName); if (itIndex == m_mapComFunc.end()) { //try case insensive with IDispatch::GetIDsOfNames DISPID id; if (getDispid(sFuncName, &id)) { CComBSTR memberName; unsigned int pcNames=0; // get the case sensitive name if( SUCCEEDED(getTypeInfo()->GetNames( id, & memberName, 1, &pcNames))) { //get the associated index and add an entry to the map //with the name sFuncName which differs in the casing of the letters to //the actual name as obtained from ITypeInfo OUString sRealName(reinterpret_cast(LPCOLESTR(memberName))); cit itOrg = m_mapComFunc.find(sRealName); OSL_ASSERT(itOrg != m_mapComFunc.end()); // maybe this is a property, if so we need // to store either both id's ( put/get ) or // just the get. Storing both is more consistent pair pItems = m_mapComFunc.equal_range( sRealName ); for ( ;pItems.first != pItems.second; ++pItems.first ) m_mapComFunc.insert( TLBFuncIndexMap::value_type ( make_pair(sFuncName, pItems.first->second ) )); itIndex = m_mapComFunc.find( sFuncName ); } } } #if OSL_DEBUG_LEVEL >= 1 // There must only be one entry if sFuncName represents a function or two // if it is a property pair p = m_mapComFunc.equal_range(sFuncName.toAsciiLowerCase()); int numEntries = 0; for ( ;p.first != p.second; p.first ++, numEntries ++); OSL_ASSERT( ! (numEntries > 3) ); #endif if( itIndex != m_mapComFunc.end()) { ITypeInfo* pType= getTypeInfo(); FUNCDESC * pDesc = NULL; if (SUCCEEDED(pType->GetFuncDesc(itIndex->second, & pDesc))) { if (pDesc->invkind == INVOKE_FUNC) { (*pFuncDesc) = pDesc; } else { pType->ReleaseFuncDesc(pDesc); } } else { throw BridgeRuntimeError("[automation bridge] Could not get " "FUNCDESC for " + sFuncName); } } //else no entry found for sFuncName, pFuncDesc will not be filled in } void IUnknownWrapper_Impl::getPropDesc(const OUString & sFuncName, FUNCDESC ** pFuncDescGet, FUNCDESC** pFuncDescPut, VARDESC** pVarDesc) { OSL_ASSERT( * pFuncDescGet == 0 && * pFuncDescPut == 0); buildComTlbIndex(); typedef TLBFuncIndexMap::const_iterator cit; pair p = m_mapComFunc.equal_range(sFuncName); if (p.first == m_mapComFunc.end()) { //try case insensive with IDispatch::GetIDsOfNames DISPID id; if (getDispid(sFuncName, &id)) { CComBSTR memberName; unsigned int pcNames=0; // get the case sensitive name if( SUCCEEDED(getTypeInfo()->GetNames( id, & memberName, 1, &pcNames))) { //As opposed to getFuncDesc, we do not add the value because we would // need to find the get and set description for the property. This would //mean to iterate over all FUNCDESCs again. p = m_mapComFunc.equal_range(OUString(reinterpret_cast(LPCOLESTR(memberName)))); } } } for ( int i = 0 ;p.first != p.second; p.first ++, i ++) { // There are a maximum of two entries, property put and property get OSL_ASSERT( ! (i > 2) ); ITypeInfo* pType= getTypeInfo(); FUNCDESC * pFuncDesc = NULL; if (SUCCEEDED( pType->GetFuncDesc(p.first->second, & pFuncDesc))) { if (pFuncDesc->invkind == INVOKE_PROPERTYGET) { (*pFuncDescGet) = pFuncDesc; } else if (pFuncDesc->invkind == INVOKE_PROPERTYPUT || pFuncDesc->invkind == INVOKE_PROPERTYPUTREF) { //a property can have 3 entries, put, put ref, get // If INVOKE_PROPERTYPUTREF or INVOKE_PROPERTYPUT is used //depends on what is found first. if ( * pFuncDescPut) { //we already have found one pType->ReleaseFuncDesc(pFuncDesc); } else { (*pFuncDescPut) = pFuncDesc; } } else { pType->ReleaseFuncDesc(pFuncDesc); } } //ITypeInfo::GetFuncDesc may even provide a funcdesc for a VARDESC // with invkind = INVOKE_FUNC. Since this function should only return //a value for a real property (XInvokation::hasMethod, ..::hasProperty //we need to make sure that sFuncName represents a real property. VARDESC * pVD = NULL; if (SUCCEEDED(pType->GetVarDesc(p.first->second, & pVD))) (*pVarDesc) = pVD; } //else no entry for sFuncName, pFuncDesc will not be filled in } VARTYPE IUnknownWrapper_Impl::getUserDefinedElementType( ITypeInfo* pTypeInfo, const DWORD nHrefType ) { VARTYPE _type( VT_NULL ); if ( pTypeInfo ) { CComPtr spRefInfo; pTypeInfo->GetRefTypeInfo( nHrefType, &spRefInfo.p ); if ( spRefInfo ) { TypeAttr attr( spRefInfo ); spRefInfo->GetTypeAttr( &attr ); if ( attr->typekind == TKIND_ENUM ) { // We use the type of the first enum value. if ( attr->cVars == 0 ) { throw BridgeRuntimeError("[automation bridge] Could not obtain type description"); } VarDesc var( spRefInfo ); spRefInfo->GetVarDesc( 0, &var ); _type = var->lpvarValue->vt; } else if ( attr->typekind == TKIND_INTERFACE ) { _type = VT_UNKNOWN; } else if ( attr->typekind == TKIND_DISPATCH ) { _type = VT_DISPATCH; } else if ( attr->typekind == TKIND_ALIAS ) { // TKIND_ALIAS is a type that is an alias for another type. So get that alias type. _type = getUserDefinedElementType( pTypeInfo, attr->tdescAlias.hreftype ); } else { throw BridgeRuntimeError( "[automation bridge] Unhandled user defined type." ); } } } return _type; } VARTYPE IUnknownWrapper_Impl::getElementTypeDesc(const TYPEDESC *desc) { VARTYPE _type( VT_NULL ); if (desc->vt == VT_PTR) { _type = getElementTypeDesc(desc->lptdesc); _type |= VT_BYREF; } else if (desc->vt == VT_SAFEARRAY) { _type = getElementTypeDesc(desc->lptdesc); _type |= VT_ARRAY; } else if (desc->vt == VT_USERDEFINED) { ITypeInfo* thisInfo = getTypeInfo(); //kept by this instance _type = getUserDefinedElementType( thisInfo, desc->hreftype ); } else { _type = desc->vt; } return _type; } void IUnknownWrapper_Impl::buildComTlbIndex() { if ( ! m_bComTlbIndexInit) { MutexGuard guard(getBridgeMutex()); { if ( ! m_bComTlbIndexInit) { OUString sError; ITypeInfo* pType= getTypeInfo(); TypeAttr typeAttr(pType); if( SUCCEEDED( pType->GetTypeAttr( &typeAttr))) { for( long i= 0; i < typeAttr->cFuncs; i++) { FuncDesc funcDesc(pType); if( SUCCEEDED( pType->GetFuncDesc( i, &funcDesc))) { CComBSTR memberName; unsigned int pcNames=0; if( SUCCEEDED(pType->GetNames( funcDesc->memid, & memberName, 1, &pcNames))) { OUString usName(reinterpret_cast(LPCOLESTR(memberName))); m_mapComFunc.insert( TLBFuncIndexMap::value_type( usName, i)); } else { sError = "[automation bridge] IUnknownWrapper_Impl::buildComTlbIndex, " "ITypeInfo::GetNames failed."; } } else sError = "[automation bridge] IUnknownWrapper_Impl::buildComTlbIndex, " "ITypeInfo::GetFuncDesc failed."; } //If we create an Object in JScript and a property then it //has VARDESC instead of FUNCDESC for (long i = 0; i < typeAttr->cVars; i++) { VarDesc varDesc(pType); if (SUCCEEDED(pType->GetVarDesc(i, & varDesc))) { CComBSTR memberName; unsigned int pcNames = 0; if (SUCCEEDED(pType->GetNames(varDesc->memid, & memberName, 1, &pcNames))) { if (varDesc->varkind == VAR_DISPATCH) { OUString usName(reinterpret_cast(LPCOLESTR(memberName))); m_mapComFunc.insert(TLBFuncIndexMap::value_type( usName, i)); } } else { sError = "[automation bridge] IUnknownWrapper_Impl::buildComTlbIndex, " "ITypeInfo::GetNames failed."; } } else sError = "[automation bridge] IUnknownWrapper_Impl::buildComTlbIndex, " "ITypeInfo::GetVarDesc failed."; } } else sError = "[automation bridge] IUnknownWrapper_Impl::buildComTlbIndex, " "ITypeInfo::GetTypeAttr failed."; if (sError.getLength()) { throw BridgeRuntimeError(sError); } m_bComTlbIndexInit = true; } } } } ITypeInfo* IUnknownWrapper_Impl::getTypeInfo() { if( !m_spDispatch) { throw BridgeRuntimeError("The object has no IDispatch interface!"); } if( !m_spTypeInfo ) { MutexGuard guard(getBridgeMutex()); if( ! m_spTypeInfo) { CComPtr< ITypeInfo > spType; if( SUCCEEDED( m_spDispatch->GetTypeInfo( 0, LOCALE_USER_DEFAULT, &spType.p))) { OSL_DOUBLE_CHECKED_LOCKING_MEMORY_BARRIER(); //If this is a dual interface then TYPEATTR::typekind is usually TKIND_INTERFACE //We need to get the type description for TKIND_DISPATCH TypeAttr typeAttr(spType.p); if( SUCCEEDED(spType->GetTypeAttr( &typeAttr))) { if (typeAttr->typekind == TKIND_INTERFACE && typeAttr->wTypeFlags & TYPEFLAG_FDUAL) { HREFTYPE refDispatch; if (SUCCEEDED(spType->GetRefTypeOfImplType(::sal::static_int_cast< UINT, int >( -1 ), &refDispatch))) { CComPtr spTypeDisp; if (SUCCEEDED(spType->GetRefTypeInfo(refDispatch, & spTypeDisp))) m_spTypeInfo= spTypeDisp; } else { throw BridgeRuntimeError( "[automation bridge] Could not obtain type information " "for dispatch interface." ); } } else if (typeAttr->typekind == TKIND_DISPATCH) { m_spTypeInfo= spType; } else { throw BridgeRuntimeError( "[automation bridge] Automation object does not " "provide type information."); } } } else { throw BridgeRuntimeError("[automation bridge]The dispatch object does not " "support ITypeInfo!"); } } } return m_spTypeInfo; } } // end namespace /* vim:set shiftwidth=4 softtabstop=4 expandtab: */