/************************************************************************* * * $RCSfile: WColumnSelect.cxx,v $ * * $Revision: 1.15 $ * * last change: $Author: rt $ $Date: 2004-09-08 16:30:42 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the License); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an AS IS basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #ifndef DBAUI_WIZ_COLUMNSELECT_HXX #include "WColumnSelect.hxx" #endif #ifndef _DBU_MISC_HRC_ #include "dbu_misc.hrc" #endif #ifndef _TOOLS_DEBUG_HXX #include #endif #ifndef _DBAUI_MODULE_DBU_HXX_ #include "moduledbu.hxx" #endif #ifndef DBAUI_WIZARD_PAGES_HRC #include "WizardPages.hrc" #endif #ifndef DBAUI_WIZ_COPYTABLEDIALOG_HXX #include "WCopyTable.hxx" #endif #ifndef _COM_SUN_STAR_SDBCX_XDATADESCRIPTORFACTORY_HPP_ #include #endif #ifndef _COM_SUN_STAR_SDBCX_XCOLUMNSSUPPLIER_HPP_ #include #endif #ifndef _COM_SUN_STAR_SDBCX_XAPPEND_HPP_ #include #endif #ifndef _COM_SUN_STAR_SDBC_DATATYPE_HPP_ #include #endif #ifndef _COM_SUN_STAR_SDBC_COLUMNVALUE_HPP_ #include #endif #ifndef DBACCESS_SHARED_DBUSTRINGS_HRC #include "dbustrings.hrc" #endif #include using namespace ::com::sun::star::uno; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::container; // using namespace ::com::sun::star::util; using namespace ::com::sun::star::sdbc; using namespace ::com::sun::star::sdbcx; using namespace dbaui; // ----------------------------------------------------------------------- String OWizColumnSelect::GetTitle() const { return String(ModuleRes(STR_WIZ_COLUMN_SELECT_TITEL)); } // ----------------------------------------------------------------------- OWizardPage::OWizardPage( Window* pParent, WinBits nStyle) : TabPage(pParent,nStyle) ,m_pParent(static_cast(pParent)) ,m_bFirstTime(sal_True) { } // ----------------------------------------------------------------------------- OWizardPage::OWizardPage( Window* pParent, const ResId& rResId ) : TabPage(pParent,rResId) ,m_pParent(static_cast(pParent)) ,m_bFirstTime(sal_True) { } //======================================================================== // OWizColumnSelect DBG_NAME(OWizColumnSelect); //======================================================================== OWizColumnSelect::OWizColumnSelect( Window* pParent) :OWizardPage( pParent, ModuleRes( TAB_WIZ_COLUMN_SELECT )), m_flColumns( this, ModuleRes( FL_COLUMN_SELECT ) ), m_lbOrgColumnNames( this, ModuleRes( LB_ORG_COLUMN_NAMES ) ), m_ibColumn_RH( this, ModuleRes( IB_COLUMN_RH ) ), m_ibColumn_LH( this, ModuleRes( IB_COLUMN_LH ) ), m_ibColumns_RH( this, ModuleRes( IB_COLUMNS_RH ) ), m_ibColumns_LH( this, ModuleRes( IB_COLUMNS_LH ) ), m_lbNewColumnNames( this, ModuleRes( LB_NEW_COLUMN_NAMES ) ) { DBG_CTOR(OWizColumnSelect,NULL); m_ibColumn_RH.SetClickHdl(LINK(this,OWizColumnSelect,ButtonClickHdl)); m_ibColumn_LH.SetClickHdl(LINK(this,OWizColumnSelect,ButtonClickHdl)); m_ibColumns_RH.SetClickHdl(LINK(this,OWizColumnSelect,ButtonClickHdl)); m_ibColumns_LH.SetClickHdl(LINK(this,OWizColumnSelect,ButtonClickHdl)); m_lbOrgColumnNames.EnableMultiSelection(sal_True); m_lbNewColumnNames.EnableMultiSelection(sal_True); m_lbOrgColumnNames.SetDoubleClickHdl(LINK(this,OWizColumnSelect,ListDoubleClickHdl)); m_lbNewColumnNames.SetDoubleClickHdl(LINK(this,OWizColumnSelect,ListDoubleClickHdl)); FreeResource(); } // ----------------------------------------------------------------------- OWizColumnSelect::~OWizColumnSelect() { DBG_DTOR(OWizColumnSelect,NULL); while ( m_lbNewColumnNames.GetEntryCount() ) { void* pData = m_lbNewColumnNames.GetEntryData(0); if ( pData ) delete static_cast(pData); m_lbNewColumnNames.RemoveEntry(0); } m_lbNewColumnNames.Clear(); } // ----------------------------------------------------------------------- void OWizColumnSelect::Reset() { // urspr"unglichen zustand wiederherstellen DBG_CHKTHIS(OWizColumnSelect,NULL); clearListBox(m_lbOrgColumnNames); clearListBox(m_lbNewColumnNames); // insert the source columns in the left listbox const ODatabaseExport::TColumnVector* pSrcColumns = m_pParent->getSrcVector(); ODatabaseExport::TColumnVector::const_iterator aIter = pSrcColumns->begin(); for(;aIter != pSrcColumns->end();++aIter) { sal_uInt16 nPos = m_lbOrgColumnNames.InsertEntry((*aIter)->first); m_lbOrgColumnNames.SetEntryData(nPos,(*aIter)->second); } // m_pParent->clearDestColumns(); if(m_lbOrgColumnNames.GetEntryCount()) m_lbOrgColumnNames.SelectEntryPos(0); m_bFirstTime = sal_False; } // ----------------------------------------------------------------------- void OWizColumnSelect::ActivatePage( ) { DBG_CHKTHIS(OWizColumnSelect,NULL); // if there are no dest columns reset the left side with the origibnal columns if(m_pParent->getDestColumns()->size() == 0) Reset(); clearListBox(m_lbNewColumnNames); const ODatabaseExport::TColumnVector* pDestColumns = m_pParent->getDestVector(); ODatabaseExport::TColumnVector::const_iterator aIter = pDestColumns->begin(); for(;aIter != pDestColumns->end();++aIter) { USHORT nPos = m_lbNewColumnNames.InsertEntry((*aIter)->first); m_lbNewColumnNames.SetEntryData(nPos,new OFieldDescription(*((*aIter)->second))); m_lbOrgColumnNames.RemoveEntry((*aIter)->first); } m_pParent->GetOKButton().Enable(m_lbNewColumnNames.GetEntryCount() != 0); m_pParent->EnableButton(OCopyTableWizard::WIZARD_NEXT,m_lbNewColumnNames.GetEntryCount() && m_pParent->getCreateStyle() != OCopyTableWizard::WIZARD_APPEND_DATA); m_ibColumns_RH.GrabFocus(); } // ----------------------------------------------------------------------- sal_Bool OWizColumnSelect::LeavePage() { DBG_CHKTHIS(OWizColumnSelect,NULL); // m_pParent->getColumns()->clear(); m_pParent->clearDestColumns(); for(sal_uInt16 i=0 ; i< m_lbNewColumnNames.GetEntryCount();++i) { OFieldDescription* pField = static_cast(m_lbNewColumnNames.GetEntryData(i)); OSL_ENSURE(pField,"The field information can not be null!"); m_pParent->insertColumn(i,pField); } clearListBox(m_lbNewColumnNames); if(m_pParent->WasButtonPressed() == OCopyTableWizard::WIZARD_NEXT || m_pParent->WasButtonPressed() == OCopyTableWizard::WIZARD_FINISH) return m_pParent->getDestColumns()->size(); else return sal_True; } // ----------------------------------------------------------------------- IMPL_LINK( OWizColumnSelect, ButtonClickHdl, Button *, pButton ) { MultiListBox *pLeft = NULL; MultiListBox *pRight = NULL; sal_Bool bAll = sal_False; if(pButton == &m_ibColumn_RH) { pLeft = &m_lbOrgColumnNames; pRight = &m_lbNewColumnNames; } else if(pButton == &m_ibColumn_LH) { pLeft = &m_lbNewColumnNames; pRight = &m_lbOrgColumnNames; } else if(pButton == &m_ibColumns_RH) { pLeft = &m_lbOrgColumnNames; pRight = &m_lbNewColumnNames; bAll = sal_True; } else if(pButton == &m_ibColumns_LH) { pLeft = &m_lbNewColumnNames; pRight = &m_lbOrgColumnNames; bAll = sal_True; } // else ???? Reference< XDatabaseMetaData > xMetaData(m_pParent->m_xConnection->getMetaData()); ::rtl::OUString sExtraChars = xMetaData->getExtraNameCharacters(); sal_Int32 nMaxNameLen = m_pParent->getMaxColumnNameLength(); ::comphelper::TStringMixEqualFunctor aCase(xMetaData->storesMixedCaseQuotedIdentifiers()); ::std::vector< ::rtl::OUString> aRightColumns; fillColumns(pRight,aRightColumns); String aColumnName; if(!bAll) { for(sal_uInt16 i=0; i < pLeft->GetSelectEntryCount(); ++i) moveColumn(pRight,pLeft,aRightColumns,pLeft->GetSelectEntry(i),sExtraChars,nMaxNameLen,aCase); for(sal_uInt16 j=pLeft->GetSelectEntryCount(); j ; --j) pLeft->RemoveEntry(pLeft->GetSelectEntry(j-1)); } else { sal_uInt16 nEntries = pLeft->GetEntryCount(); for(sal_uInt16 i=0; i < nEntries; ++i) moveColumn(pRight,pLeft,aRightColumns,pLeft->GetEntry(i),sExtraChars,nMaxNameLen,aCase); for(sal_uInt16 j=pLeft->GetEntryCount(); j ; --j) pLeft->RemoveEntry(j-1); } enableButtons(); if(m_lbOrgColumnNames.GetEntryCount()) m_lbOrgColumnNames.SelectEntryPos(0); return 0; } // ----------------------------------------------------------------------- IMPL_LINK( OWizColumnSelect, ListDoubleClickHdl, MultiListBox *, pListBox ) { MultiListBox *pLeft,*pRight; if(pListBox == &m_lbOrgColumnNames) { pLeft = &m_lbOrgColumnNames; pRight = &m_lbNewColumnNames; } else { pRight = &m_lbOrgColumnNames; pLeft = &m_lbNewColumnNames; } ////////////////////////////////////////////////////////////////////// // Wenn Datenbank PrimaryKeys verarbeiten kann, PrimaryKey anlegen Reference< XDatabaseMetaData > xMetaData(m_pParent->m_xConnection->getMetaData()); ::rtl::OUString sExtraChars = xMetaData->getExtraNameCharacters(); sal_Int32 nMaxNameLen = m_pParent->getMaxColumnNameLength(); ::comphelper::TStringMixEqualFunctor aCase(xMetaData->storesMixedCaseQuotedIdentifiers()); ::std::vector< ::rtl::OUString> aRightColumns; fillColumns(pRight,aRightColumns); String aColumnName; for(sal_uInt16 i=0; i < pLeft->GetSelectEntryCount(); ++i) moveColumn(pRight,pLeft,aRightColumns,pLeft->GetSelectEntry(i),sExtraChars,nMaxNameLen,aCase); for(sal_uInt16 j=pLeft->GetSelectEntryCount(); j ; --j) pLeft->RemoveEntry(pLeft->GetSelectEntry(j-1)); enableButtons(); return 0; } // ----------------------------------------------------------------------------- void OWizColumnSelect::clearListBox(MultiListBox& _rListBox) { while(_rListBox.GetEntryCount()) _rListBox.RemoveEntry(0); _rListBox.Clear(); } // ----------------------------------------------------------------------------- void OWizColumnSelect::fillColumns(ListBox* pRight,::std::vector< ::rtl::OUString> &_rRightColumns) { sal_uInt16 nCount = pRight->GetEntryCount(); _rRightColumns.reserve(nCount); for(sal_uInt16 i=0; i < nCount;++i) _rRightColumns.push_back(pRight->GetEntry(i)); } // ----------------------------------------------------------------------------- void OWizColumnSelect::createNewColumn( ListBox* _pListbox, OFieldDescription* _pSrcField, ::std::vector< ::rtl::OUString>& _rRightColumns, const ::rtl::OUString& _sColumnName, const ::rtl::OUString& _sExtraChars, sal_Int32 _nMaxNameLen, const ::comphelper::TStringMixEqualFunctor& _aCase, USHORT nPos) { ::rtl::OUString sConvertedName = m_pParent->convertColumnName(TMultiListBoxEntryFindFunctor(&_rRightColumns,_aCase), _sColumnName, _sExtraChars, _nMaxNameLen); OFieldDescription* pNewField = new OFieldDescription(*_pSrcField); pNewField->SetName(sConvertedName); sal_Bool bNotConvert = sal_True; pNewField->SetType(m_pParent->convertType(_pSrcField->getTypeInfo(),bNotConvert)); if ( !m_pParent->supportsPrimaryKey() ) pNewField->SetPrimaryKey(sal_False); _pListbox->SetEntryData(_pListbox->InsertEntry(sConvertedName),pNewField); _rRightColumns.push_back(sConvertedName); if ( !bNotConvert ) m_pParent->showColumnTypeNotSupported(sConvertedName); } // ----------------------------------------------------------------------------- void OWizColumnSelect::moveColumn( ListBox* _pRight, ListBox* _pLeft, ::std::vector< ::rtl::OUString>& _rRightColumns, const ::rtl::OUString& _sColumnName, const ::rtl::OUString& _sExtraChars, sal_Int32 _nMaxNameLen, const ::comphelper::TStringMixEqualFunctor& _aCase) { if(_pRight == &m_lbNewColumnNames) { // we copy the column into the new format for the dest OFieldDescription* pSrcField = static_cast(_pLeft->GetEntryData(_pLeft->GetEntryPos(String(_sColumnName)))); createNewColumn(_pRight,pSrcField,_rRightColumns,_sColumnName,_sExtraChars,_nMaxNameLen,_aCase); } else { // find the new column in the dest name mapping to obtain the old column OCopyTableWizard::TNameMapping::iterator aIter = ::std::find_if(m_pParent->m_mNameMapping.begin(),m_pParent->m_mNameMapping.end(), ::std::compose1( ::std::bind2nd(_aCase, _sColumnName), ::std::select2nd()) ); DBG_ASSERT(aIter != m_pParent->m_mNameMapping.end(),"Column must to be defined"); const ODatabaseExport::TColumns* pSrcColumns = m_pParent->getSourceColumns(); ODatabaseExport::TColumns::const_iterator aSrcIter = pSrcColumns->find((*aIter).first); if ( aSrcIter != pSrcColumns->end() ) { // we need also the old position of this column to insert it back on that position again const ODatabaseExport::TColumnVector* pSrcVector = m_pParent->getSrcVector(); ODatabaseExport::TColumnVector::const_iterator aPos = ::std::find(pSrcVector->begin(),pSrcVector->end(),aSrcIter); OSL_ENSURE( aPos != pSrcVector->end(),"Invalid position for the iterator here!"); USHORT nPos = (aPos - pSrcVector->begin()) - adjustColumnPosition(_pLeft, _sColumnName, (aPos - pSrcVector->begin()), _aCase); _pRight->SetEntryData( _pRight->InsertEntry( (*aIter).first, nPos),aSrcIter->second ); _rRightColumns.push_back((*aIter).first); } } } // ----------------------------------------------------------------------------- // Simply returning fields back to their original position is // not enough. We need to take into acccount what fields have // been removed earlier and adjust accordingly. Based on the // algorithm employed in moveColumn(). USHORT OWizColumnSelect::adjustColumnPosition( ListBox* _pLeft, const ::rtl::OUString& _sColumnName, USHORT nCurrentPos, const ::comphelper::TStringMixEqualFunctor& _aCase) { USHORT nAdjustedPos = 0; // if returning all entries to their original position, // then there is no need to adjust the positions. if (m_ibColumns_LH.HasFocus()) return nAdjustedPos; sal_uInt16 nCount = _pLeft->GetEntryCount(); ::rtl::OUString sColumnString; for(sal_uInt16 i=0; i < nCount; ++i) { sColumnString = _pLeft->GetEntry(i); if(_sColumnName != sColumnString) { // find the new column in the dest name mapping to obtain the old column OCopyTableWizard::TNameMapping::iterator aIter = ::std::find_if(m_pParent->m_mNameMapping.begin(),m_pParent->m_mNameMapping.end(), ::std::compose1( ::std::bind2nd(_aCase, sColumnString), ::std::select2nd()) ); DBG_ASSERT(aIter != m_pParent->m_mNameMapping.end(),"Column must be defined"); const ODatabaseExport::TColumns* pSrcColumns = m_pParent->getSourceColumns(); ODatabaseExport::TColumns::const_iterator aSrcIter = pSrcColumns->find((*aIter).first); if ( aSrcIter != pSrcColumns->end() ) { // we need also the old position of this column to insert it back on that position again const ODatabaseExport::TColumnVector* pSrcVector = m_pParent->getSrcVector(); ODatabaseExport::TColumnVector::const_iterator aPos = ::std::find(pSrcVector->begin(),pSrcVector->end(),aSrcIter); USHORT nPos = aPos - pSrcVector->begin(); if( nPos < nCurrentPos) { nAdjustedPos++; } } } } return nAdjustedPos; } // ----------------------------------------------------------------------------- void OWizColumnSelect::enableButtons() { sal_Bool bEntries = m_lbNewColumnNames.GetEntryCount() != 0; if(!bEntries) m_pParent->m_mNameMapping.clear(); m_pParent->GetOKButton().Enable(bEntries); m_pParent->EnableButton(OCopyTableWizard::WIZARD_NEXT,bEntries && m_pParent->getCreateStyle() != OCopyTableWizard::WIZARD_APPEND_DATA); } // -----------------------------------------------------------------------------