/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // static ---------------------------------------------------------------- // #i19922# - tdf#126051 see svx/source/dialog/hdft.cxx and sw/source/uibase/sidebar/PageMarginControl.hxx const tools::Long MINBODY = 56; // 1mm in twips rounded const sal_uInt16 SvxPageDescPage::pRanges[] = { SID_ATTR_BORDER_OUTER, SID_ATTR_BORDER_SHADOW, SID_ATTR_LRSPACE, SID_ATTR_PAGE_SHARED, SID_SWREGISTER_COLLECTION, SID_SWREGISTER_MODE, 0 }; // ------- Mapping page layout ------------------------------------------ const SvxPageUsage aArr[] = { SvxPageUsage::All, SvxPageUsage::Mirror, SvxPageUsage::Right, SvxPageUsage::Left }; static sal_uInt16 PageUsageToPos_Impl( SvxPageUsage nUsage ) { for ( size_t i = 0; i < SAL_N_ELEMENTS(aArr); ++i ) if ( aArr[i] == nUsage ) return i; return 3; } static SvxPageUsage PosToPageUsage_Impl( sal_uInt16 nPos ) { if ( nPos >= SAL_N_ELEMENTS(aArr) ) return SvxPageUsage::NONE; return aArr[nPos]; } static Size GetMinBorderSpace_Impl( const SvxShadowItem& rShadow, const SvxBoxItem& rBox ) { Size aSz; aSz.setHeight( rShadow.CalcShadowSpace( SvxShadowItemSide::BOTTOM ) + rBox.CalcLineSpace( SvxBoxItemLine::BOTTOM ) ); aSz.AdjustHeight(rShadow.CalcShadowSpace( SvxShadowItemSide::TOP ) + rBox.CalcLineSpace( SvxBoxItemLine::TOP ) ); aSz.setWidth( rShadow.CalcShadowSpace( SvxShadowItemSide::LEFT ) + rBox.CalcLineSpace( SvxBoxItemLine::LEFT ) ); aSz.AdjustWidth(rShadow.CalcShadowSpace( SvxShadowItemSide::RIGHT ) + rBox.CalcLineSpace( SvxBoxItemLine::RIGHT ) ); return aSz; } static tools::Long ConvertLong_Impl( const tools::Long nIn, MapUnit eUnit ) { return OutputDevice::LogicToLogic( nIn, eUnit, MapUnit::MapTwip ); } static bool IsEqualSize_Impl( const SvxSizeItem* pSize, const Size& rSize ) { if ( pSize ) { Size aSize = pSize->GetSize(); tools::Long nDiffW = std::abs( rSize.Width () - aSize.Width () ); tools::Long nDiffH = std::abs( rSize.Height() - aSize.Height() ); return ( nDiffW < 10 && nDiffH < 10 ); } else return false; } #define MARGIN_LEFT ( MarginPosition(0x0001) ) #define MARGIN_RIGHT ( MarginPosition(0x0002) ) #define MARGIN_TOP ( MarginPosition(0x0004) ) #define MARGIN_BOTTOM ( MarginPosition(0x0008) ) // class SvxPageDescPage -------------------------------------------------- std::unique_ptr SvxPageDescPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet ) { return std::make_unique(pPage, pController, *rSet); } SvxPageDescPage::SvxPageDescPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rAttr) : SfxTabPage(pPage, pController, "cui/ui/pageformatpage.ui", "PageFormatPage", &rAttr) , bLandscape(false) , eMode(SVX_PAGE_MODE_STANDARD) , ePaperStart(PAPER_A3) , m_nPos(0) , mpDefPrinter(nullptr) , mbDelPrinter(false) , mbEnableDrawingLayerFillStyles(false) , m_xPaperSizeBox(new SvxPaperSizeListBox(m_xBuilder->weld_combo_box("comboPageFormat"))) , m_xPaperWidthEdit(m_xBuilder->weld_metric_spin_button("spinWidth", FieldUnit::CM)) , m_xPaperHeightEdit(m_xBuilder->weld_metric_spin_button("spinHeight", FieldUnit::CM)) , m_xOrientationFT(m_xBuilder->weld_label("labelOrientation")) , m_xPortraitBtn(m_xBuilder->weld_radio_button("radiobuttonPortrait")) , m_xLandscapeBtn(m_xBuilder->weld_radio_button("radiobuttonLandscape")) , m_xTextFlowLbl(m_xBuilder->weld_label("labelTextFlow")) , m_xTextFlowBox(new svx::FrameDirectionListBox(m_xBuilder->weld_combo_box("comboTextFlowBox"))) , m_xPaperTrayBox(m_xBuilder->weld_combo_box("comboPaperTray")) , m_xLeftMarginLbl(m_xBuilder->weld_label("labelLeftMargin")) , m_xLeftMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargLeft", FieldUnit::CM)) , m_xRightMarginLbl(m_xBuilder->weld_label("labelRightMargin")) , m_xRightMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargRight", FieldUnit::CM)) , m_xTopMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargTop", FieldUnit::CM)) , m_xBottomMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargBot", FieldUnit::CM)) , m_xGutterMarginLbl(m_xBuilder->weld_label("labelGutterMargin")) , m_xGutterMarginEdit(m_xBuilder->weld_metric_spin_button("spinMargGut", FieldUnit::CM)) , m_xPageText(m_xBuilder->weld_label("labelPageLayout")) , m_xLayoutBox(m_xBuilder->weld_combo_box("comboPageLayout")) , m_xNumberFormatText(m_xBuilder->weld_label("labelPageNumbers")) , m_xNumberFormatBox(new SvxPageNumberListBox(m_xBuilder->weld_combo_box("comboLayoutFormat"))) , m_xTblAlignFT(m_xBuilder->weld_label("labelTblAlign")) , m_xHorzBox(m_xBuilder->weld_check_button("checkbuttonHorz")) , m_xVertBox(m_xBuilder->weld_check_button("checkbuttonVert")) , m_xAdaptBox(m_xBuilder->weld_check_button("checkAdaptBox")) , m_xRegisterCB(m_xBuilder->weld_check_button("checkRegisterTrue")) , m_xRegisterFT(m_xBuilder->weld_label("labelRegisterStyle")) , m_xRegisterLB(m_xBuilder->weld_combo_box("comboRegisterStyle")) , m_xGutterPositionFT(m_xBuilder->weld_label("labelGutterPosition")) , m_xGutterPositionLB(m_xBuilder->weld_combo_box("comboGutterPosition")) , m_xRtlGutterCB(m_xBuilder->weld_check_button("checkRtlGutter")) , m_xBackgroundFullSizeCB(m_xBuilder->weld_check_button("checkBackgroundFullSize")) // Strings stored in UI , m_xInsideLbl(m_xBuilder->weld_label("labelInner")) , m_xOutsideLbl(m_xBuilder->weld_label("labelOuter")) , m_xPrintRangeQueryText(m_xBuilder->weld_label("labelMsg")) , m_xBspWin(new weld::CustomWeld(*m_xBuilder, "drawingareaPageDirection", m_aBspWin)) { m_xRegisterLB->set_size_request(m_xRegisterLB->get_approximate_digit_width() * 20, -1); bBorderModified = false; m_aBspWin.EnableRTL(false); // this page needs ExchangeSupport SetExchangeSupport(); SvtLanguageOptions aLangOptions; bool bCJK = aLangOptions.IsAsianTypographyEnabled(); bool bCTL = aLangOptions.IsCTLFontEnabled(); bool bWeb = false; const SfxPoolItem* pItem; SfxObjectShell* pShell; if(SfxItemState::SET == rAttr.GetItemState(SID_HTML_MODE, false, &pItem) || ( nullptr != (pShell = SfxObjectShell::Current()) && nullptr != (pItem = pShell->GetItem(SID_HTML_MODE)))) bWeb = 0 != (static_cast(pItem)->GetValue() & HTMLMODE_ON); // fill text flow listbox with valid entries m_xTextFlowBox->append(SvxFrameDirection::Horizontal_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_HORI)); if (bCTL) m_xTextFlowBox->append(SvxFrameDirection::Horizontal_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_HORI)); // #109989# do not show vertical directions in Writer/Web if( !bWeb && bCJK ) { m_xTextFlowBox->append(SvxFrameDirection::Vertical_RL_TB, SvxResId(RID_SVXSTR_PAGEDIR_RTL_VERT)); m_xTextFlowBox->append(SvxFrameDirection::Vertical_LR_TB, SvxResId(RID_SVXSTR_PAGEDIR_LTR_VERT)); } // #109989# show the text direction box in Writer/Web too if( (bCJK || bCTL) && SfxItemState::UNKNOWN < rAttr.GetItemState(GetWhich( SID_ATTR_FRAMEDIRECTION ))) { m_xTextFlowLbl->show(); m_xTextFlowBox->show(); m_xTextFlowBox->connect_changed(LINK(this, SvxPageDescPage, FrameDirectionModify_Impl)); m_aBspWin.EnableFrameDirection(true); } Init_Impl(); FieldUnit eFUnit = GetModuleFieldUnit( rAttr ); SetFieldUnit( *m_xLeftMarginEdit, eFUnit ); SetFieldUnit( *m_xRightMarginEdit, eFUnit ); SetFieldUnit( *m_xTopMarginEdit, eFUnit ); SetFieldUnit( *m_xBottomMarginEdit, eFUnit ); SetFieldUnit(*m_xGutterMarginEdit, eFUnit); SetFieldUnit( *m_xPaperWidthEdit, eFUnit ); SetFieldUnit( *m_xPaperHeightEdit, eFUnit ); if ( SfxViewShell::Current() && SfxViewShell::Current()->GetPrinter() ) { mpDefPrinter = SfxViewShell::Current()->GetPrinter(); } else { mpDefPrinter = VclPtr::Create(); mbDelPrinter = true; } MapMode aOldMode = mpDefPrinter->GetMapMode(); mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip)); // set first- and last-values for the margins Size aPaperSize = mpDefPrinter->GetPaperSize(); Size aPrintSize = mpDefPrinter->GetOutputSize(); /* * To convert a point ( 0,0 ) into logic coordinates * looks like nonsense; but it makes sense when the * coordinate system's origin has been moved. */ Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() ); mpDefPrinter->SetMapMode( aOldMode ); nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X()), FieldUnit::TWIP); nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X()), FieldUnit::TWIP); nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() ), FieldUnit::TWIP); nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y()), FieldUnit::TWIP ); nLastLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP); nLastRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(aPrintOffset.X() + aPrintSize.Width()), FieldUnit::TWIP); nLastTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP); nLastBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(aPrintOffset.Y() + aPrintSize.Height()), FieldUnit::TWIP); // #i4219# get DrawingLayer options const SvtOptionsDrawinglayer aDrawinglayerOpt; // #i4219# take Maximum now from configuration (1/100th cm) // was: 11900 -> 119 cm ;new value 3 meters -> 300 cm -> 30000 m_xPaperWidthEdit->set_max(m_xPaperWidthEdit->normalize(aDrawinglayerOpt.GetMaximumPaperWidth()), FieldUnit::CM); m_xPaperHeightEdit->set_max(m_xPaperHeightEdit->normalize(aDrawinglayerOpt.GetMaximumPaperHeight()), FieldUnit::CM); // #i4219# also for margins (1/100th cm). Was: 9999, keeping. m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperLeftMargin()), FieldUnit::MM); m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperRightMargin()), FieldUnit::MM); m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperTopMargin()), FieldUnit::MM); m_xBottomMarginEdit->set_max(m_xBottomMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperBottomMargin()), FieldUnit::MM); m_xGutterMarginEdit->set_max( m_xGutterMarginEdit->normalize(aDrawinglayerOpt.GetMaximumPaperLeftMargin()), FieldUnit::MM); // Get the i18n framework numberings and add them to the listbox. SvxNumOptionsTabPageHelper::GetI18nNumbering(m_xNumberFormatBox->get_widget(), std::numeric_limits::max()); } SvxPageDescPage::~SvxPageDescPage() { if(mbDelPrinter) { mpDefPrinter.disposeAndClear(); mbDelPrinter = false; } } void SvxPageDescPage::Init_Impl() { // adjust the handler m_xLayoutBox->connect_changed(LINK(this, SvxPageDescPage, LayoutHdl_Impl)); m_xGutterPositionLB->connect_changed(LINK(this, SvxPageDescPage, GutterPositionHdl_Impl)); m_xPaperSizeBox->connect_changed(LINK(this, SvxPageDescPage, PaperSizeSelect_Impl)); m_xPaperWidthEdit->connect_value_changed( LINK(this, SvxPageDescPage, PaperSizeModify_Impl)); m_xPaperHeightEdit->connect_value_changed(LINK(this, SvxPageDescPage, PaperSizeModify_Impl)); m_xLandscapeBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); m_xPortraitBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); Link aLink = LINK(this, SvxPageDescPage, BorderModify_Impl); m_xLeftMarginEdit->connect_value_changed(aLink); m_xRightMarginEdit->connect_value_changed(aLink); m_xTopMarginEdit->connect_value_changed(aLink); m_xBottomMarginEdit->connect_value_changed(aLink); m_xGutterMarginEdit->connect_value_changed(aLink); m_xHorzBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl)); m_xVertBox->connect_toggled(LINK(this, SvxPageDescPage, CenterHdl_Impl)); } void SvxPageDescPage::Reset( const SfxItemSet* rSet ) { SfxItemPool* pPool = rSet->GetPool(); SAL_WARN_IF(!pPool, "cui.tabpages", "Where is the pool?"); MapUnit eUnit = pPool->GetMetric( GetWhich( SID_ATTR_LRSPACE ) ); // adjust margins (right/left) const SfxPoolItem* pItem = GetItem( *rSet, SID_ATTR_LRSPACE ); if ( pItem ) { const SvxLRSpaceItem& rLRSpace = static_cast(*pItem); SetMetricValue( *m_xLeftMarginEdit, rLRSpace.GetLeft(), eUnit ); SetMetricValue(*m_xGutterMarginEdit, rLRSpace.GetGutterMargin(), eUnit); m_aBspWin.SetLeft( static_cast(ConvertLong_Impl( rLRSpace.GetLeft(), eUnit )) ); SetMetricValue( *m_xRightMarginEdit, rLRSpace.GetRight(), eUnit ); m_aBspWin.SetRight( static_cast(ConvertLong_Impl( rLRSpace.GetRight(), eUnit )) ); } // adjust margins (top/bottom) pItem = GetItem( *rSet, SID_ATTR_ULSPACE ); if ( pItem ) { const SvxULSpaceItem& rULSpace = static_cast(*pItem); SetMetricValue( *m_xTopMarginEdit, rULSpace.GetUpper(), eUnit ); m_aBspWin.SetTop( static_cast(ConvertLong_Impl( static_cast(rULSpace.GetUpper()), eUnit )) ); SetMetricValue( *m_xBottomMarginEdit, rULSpace.GetLower(), eUnit ); m_aBspWin.SetBottom( static_cast(ConvertLong_Impl( static_cast(rULSpace.GetLower()), eUnit )) ); } if (rSet->HasItem(SID_ATTR_CHAR_GRABBAG, &pItem)) { const auto& rGrabBagItem = static_cast(*pItem); bool bGutterAtTop{}; auto it = rGrabBagItem.GetGrabBag().find("GutterAtTop"); if (it != rGrabBagItem.GetGrabBag().end()) { it->second >>= bGutterAtTop; } if (bGutterAtTop) { m_xGutterPositionLB->set_active(1); } else { // Left. m_xGutterPositionLB->set_active(0); } it = rGrabBagItem.GetGrabBag().find("RtlGutter"); bool bRtlGutter{}; if (it != rGrabBagItem.GetGrabBag().end()) { it->second >>= bRtlGutter; m_xRtlGutterCB->set_active(bRtlGutter); m_xRtlGutterCB->show(); } it = rGrabBagItem.GetGrabBag().find("BackgroundFullSize"); bool isBackgroundFullSize{}; if (it != rGrabBagItem.GetGrabBag().end()) { it->second >>= isBackgroundFullSize; m_xBackgroundFullSizeCB->set_active(isBackgroundFullSize); m_xBackgroundFullSizeCB->show(); } } // general page data SvxNumType eNumType = SVX_NUM_ARABIC; bLandscape = ( mpDefPrinter->GetOrientation() == Orientation::Landscape ); SvxPageUsage nUse = SvxPageUsage::All; pItem = GetItem( *rSet, SID_ATTR_PAGE ); if ( pItem ) { const SvxPageItem& rItem = static_cast(*pItem); eNumType = rItem.GetNumType(); nUse = rItem.GetPageUsage(); bLandscape = rItem.IsLandscape(); } // alignment m_xLayoutBox->set_active(::PageUsageToPos_Impl(nUse)); m_aBspWin.SetUsage( nUse ); LayoutHdl_Impl( *m_xLayoutBox ); //adjust numeration type of the page style m_xNumberFormatBox->set_active_id(eNumType); m_xPaperTrayBox->clear(); sal_uInt8 nPaperBin = PAPERBIN_PRINTER_SETTINGS; pItem = GetItem( *rSet, SID_ATTR_PAGE_PAPERBIN ); if ( pItem ) { nPaperBin = static_cast(pItem)->GetValue(); if ( nPaperBin >= mpDefPrinter->GetPaperBinCount() ) nPaperBin = PAPERBIN_PRINTER_SETTINGS; } OUString aBinName; if ( PAPERBIN_PRINTER_SETTINGS == nPaperBin ) aBinName = EditResId(RID_SVXSTR_PAPERBIN_SETTINGS); else aBinName = mpDefPrinter->GetPaperBinName( static_cast(nPaperBin) ); m_xPaperTrayBox->append(OUString::number(nPaperBin), aBinName); m_xPaperTrayBox->set_active_text(aBinName); // reset focus handler to default first so know none already connected m_xPaperTrayBox->connect_focus_in(Link()); // update the list when widget gets focus m_xPaperTrayBox->connect_focus_in(LINK(this, SvxPageDescPage, PaperBinHdl_Impl)); Size aPaperSize = SvxPaperInfo::GetPaperSize( mpDefPrinter ); pItem = GetItem( *rSet, SID_ATTR_PAGE_SIZE ); if ( pItem ) aPaperSize = static_cast(pItem)->GetSize(); bool bOrientationSupport = mpDefPrinter->HasSupport( PrinterSupport::SetOrientation ); if ( !bOrientationSupport && aPaperSize.Width() > aPaperSize.Height() ) bLandscape = true; // tdf#130548 disable callbacks on the other of a pair of the radiogroup // when toggling its partner m_xLandscapeBtn->connect_toggled(Link()); m_xPortraitBtn->connect_toggled(Link()); m_xLandscapeBtn->set_active(bLandscape); m_xPortraitBtn->set_active(!bLandscape); m_xLandscapeBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); m_xPortraitBtn->connect_toggled(LINK(this, SvxPageDescPage, SwapOrientation_Impl)); m_aBspWin.SetSize( Size( ConvertLong_Impl( aPaperSize.Width(), eUnit ), ConvertLong_Impl( aPaperSize.Height(), eUnit ) ) ); aPaperSize = OutputDevice::LogicToLogic(aPaperSize, MapMode(eUnit), MapMode(MapUnit::Map100thMM)); if ( bLandscape ) Swap( aPaperSize ); // Actual Paper Format Paper ePaper = SvxPaperInfo::GetSvxPaper( aPaperSize, MapUnit::Map100thMM ); if ( PAPER_USER != ePaper ) aPaperSize = SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM ); if ( bLandscape ) Swap( aPaperSize ); // write values into the edits SetMetricValue( *m_xPaperHeightEdit, aPaperSize.Height(), MapUnit::Map100thMM ); SetMetricValue( *m_xPaperWidthEdit, aPaperSize.Width(), MapUnit::Map100thMM ); m_xPaperSizeBox->clear(); m_xPaperSizeBox->FillPaperSizeEntries( ( ePaperStart == PAPER_A3 ) ? PaperSizeApp::Std : PaperSizeApp::Draw ); m_xPaperSizeBox->set_active_id( ePaper ); // application specific switch ( eMode ) { case SVX_PAGE_MODE_CENTER: { m_xTblAlignFT->show(); m_xHorzBox->show(); m_xVertBox->show(); DisableVerticalPageDir(); // horizontal alignment pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 ); m_xHorzBox->set_active(pItem && static_cast(pItem)->GetValue()); // vertical alignment pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT2 ); m_xVertBox->set_active(pItem && static_cast(pItem)->GetValue()); // set example window on the table m_aBspWin.SetTable( true ); m_aBspWin.SetHorz(m_xHorzBox->get_active()); m_aBspWin.SetVert(m_xVertBox->get_active()); m_xGutterMarginLbl->hide(); m_xGutterMarginEdit->hide(); m_xGutterPositionFT->hide(); m_xGutterPositionLB->hide(); break; } case SVX_PAGE_MODE_PRESENTATION: { DisableVerticalPageDir(); m_xAdaptBox->show(); pItem = GetItem( *rSet, SID_ATTR_PAGE_EXT1 ); m_xAdaptBox->set_active( pItem && static_cast(pItem)->GetValue() ); //!!! hidden, because not implemented by StarDraw m_xLayoutBox->hide(); m_xPageText->hide(); m_xGutterMarginLbl->hide(); m_xGutterMarginEdit->hide(); m_xGutterPositionFT->hide(); m_xGutterPositionLB->hide(); break; } default: ;//prevent warning } // display background and border in the example ResetBackground_Impl( *rSet ); //! UpdateExample_Impl(); RangeHdl_Impl(); InitHeadFoot_Impl( *rSet ); bBorderModified = false; SwapFirstValues_Impl( false ); UpdateExample_Impl(); m_xLeftMarginEdit->save_value(); m_xRightMarginEdit->save_value(); m_xTopMarginEdit->save_value(); m_xBottomMarginEdit->save_value(); m_xGutterMarginEdit->save_value(); m_xLayoutBox->save_value(); m_xNumberFormatBox->save_value(); m_xPaperSizeBox->save_value(); m_xPaperWidthEdit->save_value(); m_xPaperHeightEdit->save_value(); m_xPortraitBtn->save_state(); m_xLandscapeBtn->save_state(); m_xPaperTrayBox->save_value(); m_xVertBox->save_state(); m_xHorzBox->save_state(); m_xAdaptBox->save_state(); m_xGutterPositionLB->save_value(); m_xRtlGutterCB->save_state(); m_xBackgroundFullSizeCB->save_state(); CheckMarginEdits( true ); if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_MODE)) { m_xRegisterCB->set_active(static_cast(rSet->Get( SID_SWREGISTER_MODE)).GetValue()); m_xRegisterCB->save_state(); RegisterModify(*m_xRegisterCB); } if(SfxItemState::SET == rSet->GetItemState(SID_SWREGISTER_COLLECTION)) { m_xRegisterLB->set_active_text( static_cast(rSet->Get(SID_SWREGISTER_COLLECTION)).GetValue()); m_xRegisterLB->save_value(); } SfxItemState eState = rSet->GetItemState( GetWhich( SID_ATTR_FRAMEDIRECTION ), true, &pItem ); if( SfxItemState::UNKNOWN != eState ) { SvxFrameDirection nVal = SfxItemState::SET == eState ? static_cast(pItem)->GetValue() : SvxFrameDirection::Horizontal_LR_TB; m_xTextFlowBox->set_active_id(nVal); m_xTextFlowBox->save_value(); m_aBspWin.SetFrameDirection(nVal); } } void SvxPageDescPage::FillUserData() { if (SVX_PAGE_MODE_PRESENTATION == eMode) SetUserData(m_xAdaptBox->get_active() ? OUString("1") : OUString("0")) ; } bool SvxPageDescPage::FillItemSet( SfxItemSet* rSet ) { bool bModified = false; const SfxItemSet& rOldSet = GetItemSet(); SfxItemPool* pPool = rOldSet.GetPool(); DBG_ASSERT( pPool, "Where is the pool?" ); sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE ); MapUnit eUnit = pPool->GetMetric( nWhich ); const SfxPoolItem* pOld = nullptr; // copy old left and right margins SvxLRSpaceItem aMargin( static_cast(rOldSet.Get( nWhich )) ); // copy old top and bottom margins nWhich = GetWhich( SID_ATTR_ULSPACE ); SvxULSpaceItem aTopMargin( static_cast(rOldSet.Get( nWhich )) ); if (m_xLeftMarginEdit->get_value_changed_from_saved()) { aMargin.SetLeft( static_cast(GetCoreValue( *m_xLeftMarginEdit, eUnit )) ); bModified = true; } if (m_xRightMarginEdit->get_value_changed_from_saved()) { aMargin.SetRight( static_cast(GetCoreValue( *m_xRightMarginEdit, eUnit )) ); bModified = true; } if (m_xGutterMarginEdit->get_value_changed_from_saved()) { aMargin.SetGutterMargin(static_cast(GetCoreValue(*m_xGutterMarginEdit, eUnit))); bModified = true; } // set left and right margins if (bModified) { pOld = GetOldItem( *rSet, SID_ATTR_LRSPACE ); if ( !pOld || *static_cast(pOld) != aMargin ) rSet->Put( aMargin ); else bModified = false; } if (rOldSet.HasItem(SID_ATTR_CHAR_GRABBAG)) { // Set gutter position. SfxGrabBagItem aGrabBagItem( static_cast(rOldSet.Get(SID_ATTR_CHAR_GRABBAG))); if (m_xGutterPositionLB->get_value_changed_from_saved()) { bool bGutterAtTop = m_xGutterPositionLB->get_active() == 1; aGrabBagItem.GetGrabBag()["GutterAtTop"] <<= bGutterAtTop; bModified = true; } if (m_xRtlGutterCB->get_state_changed_from_saved()) { bool const bRtlGutter(m_xRtlGutterCB->get_active()); aGrabBagItem.GetGrabBag()["RtlGutter"] <<= bRtlGutter; bModified = true; } if (m_xBackgroundFullSizeCB->get_state_changed_from_saved()) { bool const isBackgroundFullSize(m_xBackgroundFullSizeCB->get_active()); aGrabBagItem.GetGrabBag()["BackgroundFullSize"] <<= isBackgroundFullSize; bModified = true; } if (bModified) { pOld = rOldSet.GetItem(SID_ATTR_CHAR_GRABBAG); if (!pOld || static_cast(*pOld) != aGrabBagItem) rSet->Put(aGrabBagItem); else bModified = false; } } bool bMod = false; if (m_xTopMarginEdit->get_value_changed_from_saved()) { aTopMargin.SetUpper( static_cast(GetCoreValue( *m_xTopMarginEdit, eUnit )) ); bMod = true; } if (m_xBottomMarginEdit->get_value_changed_from_saved()) { aTopMargin.SetLower( static_cast(GetCoreValue( *m_xBottomMarginEdit, eUnit )) ); bMod = true; } // set top and bottom margins if ( bMod ) { pOld = GetOldItem( *rSet, SID_ATTR_ULSPACE ); if ( !pOld || *static_cast(pOld) != aTopMargin ) { bModified = true; rSet->Put( aTopMargin ); } } // paper tray nWhich = GetWhich( SID_ATTR_PAGE_PAPERBIN ); sal_Int32 nPos = m_xPaperTrayBox->get_active(); sal_uInt16 nBin = m_xPaperTrayBox->get_id(nPos).toInt32(); pOld = GetOldItem( *rSet, SID_ATTR_PAGE_PAPERBIN ); if ( !pOld || static_cast(pOld)->GetValue() != nBin ) { rSet->Put( SvxPaperBinItem( nWhich, static_cast(nBin) ) ); bModified = true; } Paper ePaper = m_xPaperSizeBox->get_active_id(); bool bChecked = m_xLandscapeBtn->get_active(); if ( PAPER_USER == ePaper ) { if ( m_xPaperSizeBox->get_value_changed_from_saved() || m_xPaperWidthEdit->get_value_changed_from_saved() || m_xPaperHeightEdit->get_value_changed_from_saved() || m_xLandscapeBtn->get_state_changed_from_saved() ) { Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ), GetCoreValue( *m_xPaperHeightEdit, eUnit ) ); pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE ); if ( !pOld || static_cast(pOld)->GetSize() != aSize ) { rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) ); bModified = true; } } } else { if (m_xPaperSizeBox->get_value_changed_from_saved() || m_xLandscapeBtn->get_state_changed_from_saved()) { Size aSize( SvxPaperInfo::GetPaperSize( ePaper, eUnit ) ); if ( bChecked ) Swap( aSize ); pOld = GetOldItem( *rSet, SID_ATTR_PAGE_SIZE ); if ( !pOld || static_cast(pOld)->GetSize() != aSize ) { rSet->Put( SvxSizeItem( GetWhich(SID_ATTR_PAGE_SIZE), aSize ) ); bModified = true; } } } nWhich = GetWhich( SID_ATTR_PAGE ); SvxPageItem aPage( static_cast(rOldSet.Get( nWhich )) ); bMod = m_xLayoutBox->get_value_changed_from_saved(); if ( bMod ) aPage.SetPageUsage(::PosToPageUsage_Impl(m_xLayoutBox->get_active())); if (m_xLandscapeBtn->get_state_changed_from_saved()) { aPage.SetLandscape(bChecked); bMod = true; } //Get the NumType value if (m_xNumberFormatBox->get_value_changed_from_saved()) { SvxNumType nEntryData = m_xNumberFormatBox->get_active_id(); aPage.SetNumType( nEntryData ); bMod = true; } if ( bMod ) { pOld = GetOldItem( *rSet, SID_ATTR_PAGE ); if ( !pOld || *static_cast(pOld) != aPage ) { rSet->Put( aPage ); bModified = true; } } else if ( SfxItemState::DEFAULT == rOldSet.GetItemState( nWhich ) ) rSet->ClearItem( nWhich ); else rSet->Put( rOldSet.Get( nWhich ) ); // evaluate mode specific controls switch ( eMode ) { case SVX_PAGE_MODE_CENTER: { if (m_xHorzBox->get_state_changed_from_saved()) { SfxBoolItem aHorz( GetWhich( SID_ATTR_PAGE_EXT1 ), m_xHorzBox->get_active() ); rSet->Put( aHorz ); bModified = true; } if (m_xVertBox->get_state_changed_from_saved()) { SfxBoolItem aVert( GetWhich( SID_ATTR_PAGE_EXT2 ), m_xVertBox->get_active() ); rSet->Put( aVert ); bModified = true; } break; } case SVX_PAGE_MODE_PRESENTATION: { // always put so that draw can evaluate this rSet->Put( SfxBoolItem( GetWhich( SID_ATTR_PAGE_EXT1 ), m_xAdaptBox->get_active() ) ); bModified = true; break; } default: ;//prevent warning } if (m_xRegisterCB->get_visible() && (m_xRegisterCB->get_active() || m_xRegisterCB->get_state_changed_from_saved())) { const SfxBoolItem& rRegItem = static_cast(rOldSet.Get(SID_SWREGISTER_MODE)); std::unique_ptr pRegItem(rRegItem.Clone()); bool bCheck = m_xRegisterCB->get_active(); pRegItem->SetValue(bCheck); rSet->Put(std::move(pRegItem)); bModified = true; if(bCheck) { bModified = true; rSet->Put(SfxStringItem(SID_SWREGISTER_COLLECTION, m_xRegisterLB->get_active_text())); } } if (m_xTextFlowBox->get_visible() && m_xTextFlowBox->get_value_changed_from_saved()) { SvxFrameDirection eDirection = m_xTextFlowBox->get_active_id(); rSet->Put( SvxFrameDirectionItem( eDirection, GetWhich( SID_ATTR_FRAMEDIRECTION ) ) ); bModified = true; } return bModified; } IMPL_LINK_NOARG(SvxPageDescPage, LayoutHdl_Impl, weld::ComboBox&, void) { // switch inside outside const SvxPageUsage nUsage = PosToPageUsage_Impl(m_xLayoutBox->get_active()); if (nUsage == SvxPageUsage::Mirror) { m_xLeftMarginLbl->hide(); m_xRightMarginLbl->hide(); m_xInsideLbl->show(); m_xOutsideLbl->show(); } else { m_xLeftMarginLbl->show(); m_xRightMarginLbl->show(); m_xInsideLbl->hide(); m_xOutsideLbl->hide(); } UpdateExample_Impl( true ); } IMPL_LINK_NOARG(SvxPageDescPage, GutterPositionHdl_Impl, weld::ComboBox&, void) { UpdateExample_Impl(true); } IMPL_LINK_NOARG(SvxPageDescPage, PaperBinHdl_Impl, weld::Widget&, void) { // tdf#124226 disconnect so not called again, unless Reset occurs m_xPaperTrayBox->connect_focus_in(Link()); OUString aOldName = m_xPaperTrayBox->get_active_text(); m_xPaperTrayBox->freeze(); m_xPaperTrayBox->clear(); m_xPaperTrayBox->append(OUString::number(PAPERBIN_PRINTER_SETTINGS), EditResId(RID_SVXSTR_PAPERBIN_SETTINGS)); OUString aPaperBin(EditResId(RID_SVXSTR_PAPERBIN)); const sal_uInt16 nBinCount = mpDefPrinter->GetPaperBinCount(); for (sal_uInt16 i = 0; i < nBinCount; ++i) { OUString aName = mpDefPrinter->GetPaperBinName(i); if (aName.isEmpty()) { aName = aPaperBin + " " + OUString::number( i+1 ); } m_xPaperTrayBox->append(OUString::number(i), aName); } m_xPaperTrayBox->set_active_text(aOldName); m_xPaperTrayBox->thaw(); // tdf#123650 explicitly grab-focus after the modification otherwise gtk loses track // of there the focus should be m_xPaperTrayBox->grab_focus(); } IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeSelect_Impl, weld::ComboBox&, void) { Paper ePaper = m_xPaperSizeBox->get_active_id(); if ( ePaper == PAPER_USER ) return; Size aSize( SvxPaperInfo::GetPaperSize( ePaper, MapUnit::Map100thMM ) ); if (m_xLandscapeBtn->get_active()) Swap( aSize ); if ( aSize.Height() < m_xPaperHeightEdit->get_min( FieldUnit::MM_100TH ) ) m_xPaperHeightEdit->set_min( m_xPaperHeightEdit->normalize( aSize.Height() ), FieldUnit::MM_100TH ); if ( aSize.Width() < m_xPaperWidthEdit->get_min( FieldUnit::MM_100TH ) ) m_xPaperWidthEdit->set_min( m_xPaperWidthEdit->normalize( aSize.Width() ), FieldUnit::MM_100TH ); SetMetricValue( *m_xPaperHeightEdit, aSize.Height(), MapUnit::Map100thMM ); SetMetricValue( *m_xPaperWidthEdit, aSize.Width(), MapUnit::Map100thMM ); CalcMargin_Impl(); RangeHdl_Impl(); UpdateExample_Impl( true ); if ( eMode != SVX_PAGE_MODE_PRESENTATION ) return; // Draw: if paper format the margin shall be 1 cm tools::Long nTmp = 0; bool bScreen = (( PAPER_SCREEN_4_3 == ePaper )||( PAPER_SCREEN_16_9 == ePaper)||( PAPER_SCREEN_16_10 == ePaper)); if ( !bScreen ) // no margin if screen nTmp = 1; // accordingly 1 cm if ( bScreen || m_xRightMarginEdit->get_value(FieldUnit::NONE) == 0 ) SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapCM ); if ( bScreen || m_xLeftMarginEdit->get_value(FieldUnit::NONE) == 0 ) SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapCM ); if ( bScreen || m_xBottomMarginEdit->get_value(FieldUnit::NONE) == 0 ) SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapCM ); if ( bScreen || m_xTopMarginEdit->get_value(FieldUnit::NONE) == 0 ) SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapCM ); UpdateExample_Impl( true ); } IMPL_LINK_NOARG(SvxPageDescPage, PaperSizeModify_Impl, weld::MetricSpinButton&, void) { sal_uInt16 nWhich = GetWhich( SID_ATTR_LRSPACE ); MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWhich ); Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ), GetCoreValue( *m_xPaperHeightEdit, eUnit ) ); if ( aSize.Width() > aSize.Height() ) { m_xLandscapeBtn->set_active(true); bLandscape = true; } else { m_xPortraitBtn->set_active(true); bLandscape = false; } Paper ePaper = SvxPaperInfo::GetSvxPaper( aSize, eUnit ); m_xPaperSizeBox->set_active_id( ePaper ); UpdateExample_Impl( true ); RangeHdl_Impl(); } IMPL_LINK(SvxPageDescPage, SwapOrientation_Impl, weld::Toggleable&, rBtn, void) { if (!rBtn.get_active()) return; bLandscape = m_xLandscapeBtn->get_active(); const tools::Long lWidth = GetCoreValue( *m_xPaperWidthEdit, MapUnit::Map100thMM ); const tools::Long lHeight = GetCoreValue( *m_xPaperHeightEdit, MapUnit::Map100thMM ); // swap width and height SetMetricValue(*m_xPaperWidthEdit, lHeight, MapUnit::Map100thMM); SetMetricValue(*m_xPaperHeightEdit, lWidth, MapUnit::Map100thMM); // recalculate margins if necessary CalcMargin_Impl(); PaperSizeSelect_Impl(m_xPaperSizeBox->get_widget()); RangeHdl_Impl(); SwapFirstValues_Impl(bBorderModified); UpdateExample_Impl(true); } void SvxPageDescPage::SwapFirstValues_Impl( bool bSet ) { MapMode aOldMode = mpDefPrinter->GetMapMode(); Orientation eOri = Orientation::Portrait; if ( bLandscape ) eOri = Orientation::Landscape; Orientation eOldOri = mpDefPrinter->GetOrientation(); mpDefPrinter->SetOrientation( eOri ); mpDefPrinter->SetMapMode(MapMode(MapUnit::MapTwip)); // set first- and last-values for margins Size aPaperSize = mpDefPrinter->GetPaperSize(); Size aPrintSize = mpDefPrinter->GetOutputSize(); /* * To convert a point ( 0,0 ) into logic coordinates * looks like nonsense; but it makes sense if the * coordinate system's origin has been moved. */ Point aPrintOffset = mpDefPrinter->GetPageOffset() - mpDefPrinter->PixelToLogic( Point() ); mpDefPrinter->SetMapMode( aOldMode ); mpDefPrinter->SetOrientation( eOldOri ); sal_Int64 nSetL = m_xLeftMarginEdit->denormalize( m_xLeftMarginEdit->get_value( FieldUnit::TWIP ) ); sal_Int64 nSetR = m_xRightMarginEdit->denormalize( m_xRightMarginEdit->get_value( FieldUnit::TWIP ) ); sal_Int64 nSetT = m_xTopMarginEdit->denormalize( m_xTopMarginEdit->get_value( FieldUnit::TWIP ) ); sal_Int64 nSetB = m_xBottomMarginEdit->denormalize( m_xBottomMarginEdit->get_value( FieldUnit::TWIP ) ); tools::Long nNewL = aPrintOffset.X(); tools::Long nNewR = aPaperSize.Width() - aPrintSize.Width() - aPrintOffset.X(); tools::Long nNewT = aPrintOffset.Y(); tools::Long nNewB = aPaperSize.Height() - aPrintSize.Height() - aPrintOffset.Y(); nFirstLeftMargin = m_xLeftMarginEdit->convert_value_from(m_xLeftMarginEdit->normalize(nNewL), FieldUnit::TWIP); nFirstRightMargin = m_xRightMarginEdit->convert_value_from(m_xRightMarginEdit->normalize(nNewR), FieldUnit::TWIP); nFirstTopMargin = m_xTopMarginEdit->convert_value_from(m_xTopMarginEdit->normalize(nNewT), FieldUnit::TWIP); nFirstBottomMargin = m_xBottomMarginEdit->convert_value_from(m_xBottomMarginEdit->normalize(nNewB), FieldUnit::TWIP); if ( !bSet ) return; if ( nSetL < nNewL ) m_xLeftMarginEdit->set_value( m_xLeftMarginEdit->normalize( nNewL ), FieldUnit::TWIP ); if ( nSetR < nNewR ) m_xRightMarginEdit->set_value( m_xRightMarginEdit->normalize( nNewR ), FieldUnit::TWIP ); if ( nSetT < nNewT ) m_xTopMarginEdit->set_value( m_xTopMarginEdit->normalize( nNewT ), FieldUnit::TWIP ); if ( nSetB < nNewB ) m_xBottomMarginEdit->set_value( m_xBottomMarginEdit->normalize( nNewB ), FieldUnit::TWIP ); } IMPL_LINK_NOARG(SvxPageDescPage, BorderModify_Impl, weld::MetricSpinButton&, void) { if ( !bBorderModified ) bBorderModified = true; UpdateExample_Impl(); RangeHdl_Impl(); } void SvxPageDescPage::UpdateExample_Impl( bool bResetbackground ) { // Size Size aSize( GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip ), GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip ) ); m_aBspWin.SetSize( aSize ); // Margins bool bGutterAtTop = m_xGutterPositionLB->get_active() == 1; tools::Long nTop = GetCoreValue(*m_xTopMarginEdit, MapUnit::MapTwip); if (bGutterAtTop) { nTop += GetCoreValue(*m_xGutterMarginEdit, MapUnit::MapTwip); } m_aBspWin.SetTop(nTop); m_aBspWin.SetBottom( GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip ) ); tools::Long nLeft = GetCoreValue(*m_xLeftMarginEdit, MapUnit::MapTwip); if (!bGutterAtTop) { nLeft += GetCoreValue(*m_xGutterMarginEdit, MapUnit::MapTwip); } m_aBspWin.SetLeft(nLeft); m_aBspWin.SetRight( GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip ) ); // Layout m_aBspWin.SetUsage(PosToPageUsage_Impl(m_xLayoutBox->get_active())); if ( bResetbackground ) m_aBspWin.ResetBackground(); m_aBspWin.Invalidate(); } void SvxPageDescPage::ResetBackground_Impl(const SfxItemSet& rSet) { sal_uInt16 nWhich(GetWhich(SID_ATTR_PAGE_HEADERSET)); if (SfxItemState::SET == rSet.GetItemState(nWhich, false)) { const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich, false)); const SfxItemSet& rTmpSet = rSetItem.GetItemSet(); const SfxBoolItem& rOn = static_cast< const SfxBoolItem& >(rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON))); if(rOn.GetValue()) { drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes; if(mbEnableDrawingLayerFillStyles) { // create FillAttributes directly from DrawingLayer FillStyle entries aHeaderFillAttributes = std::make_shared(rTmpSet); } else { nWhich = GetWhich(SID_ATTR_BRUSH); if(SfxItemState::SET == rTmpSet.GetItemState(nWhich)) { // create FillAttributes from SvxBrushItem const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich)); SfxItemSet aTempSet(*rTmpSet.GetPool(), svl::Items{}); setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); aHeaderFillAttributes = std::make_shared(aTempSet); } } m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes); } } nWhich = GetWhich(SID_ATTR_PAGE_FOOTERSET); if (SfxItemState::SET == rSet.GetItemState(nWhich, false)) { const SvxSetItem& rSetItem = static_cast< const SvxSetItem& >(rSet.Get(nWhich,false)); const SfxItemSet& rTmpSet = rSetItem.GetItemSet(); const SfxBoolItem& rOn = static_cast< const SfxBoolItem& >(rTmpSet.Get(GetWhich(SID_ATTR_PAGE_ON))); if(rOn.GetValue()) { drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes; if(mbEnableDrawingLayerFillStyles) { // create FillAttributes directly from DrawingLayer FillStyle entries aFooterFillAttributes = std::make_shared(rTmpSet); } else { nWhich = GetWhich(SID_ATTR_BRUSH); if(SfxItemState::SET == rTmpSet.GetItemState(nWhich)) { // create FillAttributes from SvxBrushItem const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rTmpSet.Get(nWhich)); SfxItemSet aTempSet(*rTmpSet.GetPool(), svl::Items{}); setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); aFooterFillAttributes = std::make_shared(aTempSet); } } m_aBspWin.setFooterFillAttributes(aFooterFillAttributes); } } drawinglayer::attribute::SdrAllFillAttributesHelperPtr aPageFillAttributes; if(mbEnableDrawingLayerFillStyles) { // create FillAttributes directly from DrawingLayer FillStyle entries aPageFillAttributes = std::make_shared(rSet); } else { const SfxPoolItem* pItem = GetItem(rSet, SID_ATTR_BRUSH); if(pItem) { // create FillAttributes from SvxBrushItem const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(*pItem); SfxItemSet aTempSet(*rSet.GetPool(), svl::Items{}); setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); aPageFillAttributes = std::make_shared(aTempSet); } } m_aBspWin.setPageFillAttributes(aPageFillAttributes); } void SvxPageDescPage::InitHeadFoot_Impl( const SfxItemSet& rSet ) { bLandscape = m_xLandscapeBtn->get_active(); const SfxPoolItem* pItem = GetItem( rSet, SID_ATTR_PAGE_SIZE ); if ( pItem ) m_aBspWin.SetSize( static_cast(pItem)->GetSize() ); const SvxSetItem* pSetItem = nullptr; // evaluate header attributes if ( SfxItemState::SET == rSet.GetItemState( GetWhich( SID_ATTR_PAGE_HEADERSET ), false, reinterpret_cast(&pSetItem) ) ) { const SfxItemSet& rHeaderSet = pSetItem->GetItemSet(); const SfxBoolItem& rHeaderOn = static_cast(rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_ON ) )); if ( rHeaderOn.GetValue() ) { const SvxSizeItem& rSize = static_cast( rHeaderSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) )); const SvxULSpaceItem& rUL = static_cast( rHeaderSet.Get( GetWhich( SID_ATTR_ULSPACE ) )); tools::Long nDist = rUL.GetLower(); m_aBspWin.SetHdHeight( rSize.GetSize().Height() - nDist ); m_aBspWin.SetHdDist( nDist ); const SvxLRSpaceItem& rLR = static_cast( rHeaderSet.Get( GetWhich( SID_ATTR_LRSPACE ) )); m_aBspWin.SetHdLeft( rLR.GetLeft() ); m_aBspWin.SetHdRight( rLR.GetRight() ); m_aBspWin.SetHeader( true ); } else m_aBspWin.SetHeader( false ); // show background and border in the example drawinglayer::attribute::SdrAllFillAttributesHelperPtr aHeaderFillAttributes; if(mbEnableDrawingLayerFillStyles) { // create FillAttributes directly from DrawingLayer FillStyle entries aHeaderFillAttributes = std::make_shared(rHeaderSet); } else { const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH)); if(rHeaderSet.GetItemState(nWhich) >= SfxItemState::DEFAULT) { // aBspWin.SetHdColor(rItem.GetColor()); const SvxBrushItem& rItem = static_cast< const SvxBrushItem& >(rHeaderSet.Get(nWhich)); SfxItemSet aTempSet(*rHeaderSet.GetPool(), svl::Items{}); setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); aHeaderFillAttributes = std::make_shared(aTempSet); } } m_aBspWin.setHeaderFillAttributes(aHeaderFillAttributes); } // evaluate footer attributes if ( SfxItemState::SET != rSet.GetItemState( GetWhich( SID_ATTR_PAGE_FOOTERSET ), false, reinterpret_cast(&pSetItem) ) ) return; const SfxItemSet& rFooterSet = pSetItem->GetItemSet(); const SfxBoolItem& rFooterOn = static_cast(rFooterSet.Get( GetWhich( SID_ATTR_PAGE_ON ) )); if ( rFooterOn.GetValue() ) { const SvxSizeItem& rSize = static_cast( rFooterSet.Get( GetWhich( SID_ATTR_PAGE_SIZE ) )); const SvxULSpaceItem& rUL = static_cast( rFooterSet.Get( GetWhich( SID_ATTR_ULSPACE ) )); tools::Long nDist = rUL.GetUpper(); m_aBspWin.SetFtHeight( rSize.GetSize().Height() - nDist ); m_aBspWin.SetFtDist( nDist ); const SvxLRSpaceItem& rLR = static_cast( rFooterSet.Get( GetWhich( SID_ATTR_LRSPACE ) )); m_aBspWin.SetFtLeft( rLR.GetLeft() ); m_aBspWin.SetFtRight( rLR.GetRight() ); m_aBspWin.SetFooter( true ); } else m_aBspWin.SetFooter( false ); // show background and border in the example drawinglayer::attribute::SdrAllFillAttributesHelperPtr aFooterFillAttributes; if(mbEnableDrawingLayerFillStyles) { // create FillAttributes directly from DrawingLayer FillStyle entries aFooterFillAttributes = std::make_shared(rFooterSet); } else { const sal_uInt16 nWhich(GetWhich(SID_ATTR_BRUSH)); if(rFooterSet.GetItemState(nWhich) >= SfxItemState::DEFAULT) { // aBspWin.SetFtColor(rItem.GetColor()); const SvxBrushItem& rItem = static_cast(rFooterSet.Get(nWhich)); SfxItemSet aTempSet(*rFooterSet.GetPool(), svl::Items{}); setSvxBrushItemAsFillAttributesToTargetSet(rItem, aTempSet); aFooterFillAttributes = std::make_shared(aTempSet); } } m_aBspWin.setFooterFillAttributes(aFooterFillAttributes); } void SvxPageDescPage::ActivatePage( const SfxItemSet& rSet ) { InitHeadFoot_Impl( rSet ); UpdateExample_Impl(); ResetBackground_Impl( rSet ); RangeHdl_Impl(); } DeactivateRC SvxPageDescPage::DeactivatePage( SfxItemSet* _pSet ) { // Inquiry whether the page margins are beyond the printing area. // If not, ask user whether they shall be taken. // If not, stay on the TabPage. Paper ePaper = m_xPaperSizeBox->get_active_id(); if ( ePaper != PAPER_SCREEN_4_3 && ePaper != PAPER_SCREEN_16_9 && ePaper != PAPER_SCREEN_16_10 && IsMarginOutOfRange() ) { std::unique_ptr xQueryBox(Application::CreateMessageDialog(GetFrameWeld(), VclMessageType::Question, VclButtonsType::YesNo, m_xPrintRangeQueryText->get_label())); xQueryBox->set_default_response(RET_NO); if (xQueryBox->run() == RET_NO) { weld::MetricSpinButton* pField = nullptr; if ( IsPrinterRangeOverflow( *m_xLeftMarginEdit, nFirstLeftMargin, nLastLeftMargin, MARGIN_LEFT ) ) pField = m_xLeftMarginEdit.get(); if ( IsPrinterRangeOverflow( *m_xRightMarginEdit, nFirstRightMargin, nLastRightMargin, MARGIN_RIGHT ) && !pField ) pField = m_xRightMarginEdit.get(); if ( IsPrinterRangeOverflow( *m_xTopMarginEdit, nFirstTopMargin, nLastTopMargin, MARGIN_TOP ) && !pField ) pField = m_xTopMarginEdit.get(); if ( IsPrinterRangeOverflow( *m_xBottomMarginEdit, nFirstBottomMargin, nLastBottomMargin, MARGIN_BOTTOM ) && !pField ) pField = m_xBottomMarginEdit.get(); if ( pField ) pField->grab_focus(); UpdateExample_Impl(); return DeactivateRC::KeepPage; } else CheckMarginEdits( false ); } if ( _pSet ) { FillItemSet( _pSet ); // put portray/landscape if applicable sal_uInt16 nWh = GetWhich( SID_ATTR_PAGE_SIZE ); MapUnit eUnit = GetItemSet().GetPool()->GetMetric( nWh ); Size aSize( GetCoreValue( *m_xPaperWidthEdit, eUnit ), GetCoreValue( *m_xPaperHeightEdit, eUnit ) ); // put, if current size is different to the value in _pSet const SvxSizeItem* pSize = GetItem( *_pSet, SID_ATTR_PAGE_SIZE ); if ( aSize.Width() && ( !pSize || !IsEqualSize_Impl( pSize, aSize ) ) ) _pSet->Put( SvxSizeItem( nWh, aSize ) ); } return DeactivateRC::LeavePage; } void SvxPageDescPage::RangeHdl_Impl() { // example window tools::Long nHHeight = m_aBspWin.GetHdHeight(); tools::Long nHDist = m_aBspWin.GetHdDist(); tools::Long nFHeight = m_aBspWin.GetFtHeight(); tools::Long nFDist = m_aBspWin.GetFtDist(); tools::Long nHFLeft = std::max(m_aBspWin.GetHdLeft(), m_aBspWin.GetFtLeft()); tools::Long nHFRight = std::max(m_aBspWin.GetHdRight(), m_aBspWin.GetFtRight()); // current values for page margins tools::Long nBT = static_cast(m_xTopMarginEdit->denormalize(m_xTopMarginEdit->get_value(FieldUnit::TWIP))); tools::Long nBB = static_cast(m_xBottomMarginEdit->denormalize(m_xBottomMarginEdit->get_value(FieldUnit::TWIP))); tools::Long nBL = static_cast(m_xLeftMarginEdit->denormalize(m_xLeftMarginEdit->get_value(FieldUnit::TWIP))); tools::Long nBR = static_cast(m_xRightMarginEdit->denormalize(m_xRightMarginEdit->get_value(FieldUnit::TWIP))); // calculate width of page border const SfxItemSet* _pSet = &GetItemSet(); Size aBorder; if ( _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_SHADOW) ) >= SfxItemState::DEFAULT && _pSet->GetItemState( GetWhich(SID_ATTR_BORDER_OUTER) ) >= SfxItemState::DEFAULT ) { aBorder = GetMinBorderSpace_Impl( static_cast(_pSet->Get(GetWhich(SID_ATTR_BORDER_SHADOW))), static_cast(_pSet->Get(GetWhich(SID_ATTR_BORDER_OUTER)))); } // limits paper // maximum is 54 cm tools::Long nMin = nHHeight + nHDist + nFDist + nFHeight + nBT + nBB + MINBODY + aBorder.Height(); m_xPaperHeightEdit->set_min(m_xPaperHeightEdit->normalize(nMin), FieldUnit::TWIP); nMin = MINBODY + nBL + nBR + aBorder.Width(); m_xPaperWidthEdit->set_min(m_xPaperWidthEdit->normalize(nMin), FieldUnit::TWIP); tools::Long nH = static_cast(m_xPaperHeightEdit->denormalize(m_xPaperHeightEdit->get_value(FieldUnit::TWIP))); tools::Long nW = static_cast(m_xPaperWidthEdit->denormalize(m_xPaperWidthEdit->get_value(FieldUnit::TWIP))); // Top tools::Long nMax = nH - nBB - aBorder.Height() - MINBODY - nFDist - nFHeight - nHDist - nHHeight; m_xTopMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP); // Bottom nMax = nH - nBT - aBorder.Height() - MINBODY - nFDist - nFHeight - nHDist - nHHeight; m_xBottomMarginEdit->set_max(m_xTopMarginEdit->normalize(nMax), FieldUnit::TWIP); // Left nMax = nW - nBR - MINBODY - aBorder.Width() - nHFLeft - nHFRight; m_xLeftMarginEdit->set_max(m_xLeftMarginEdit->normalize(nMax), FieldUnit::TWIP); // Right nMax = nW - nBL - MINBODY - aBorder.Width() - nHFLeft - nHFRight; m_xRightMarginEdit->set_max(m_xRightMarginEdit->normalize(nMax), FieldUnit::TWIP); } void SvxPageDescPage::CalcMargin_Impl() { // current values for page margins tools::Long nBT = GetCoreValue( *m_xTopMarginEdit, MapUnit::MapTwip ); tools::Long nBB = GetCoreValue( *m_xBottomMarginEdit, MapUnit::MapTwip ); tools::Long nBL = GetCoreValue( *m_xLeftMarginEdit, MapUnit::MapTwip ); tools::Long nBR = GetCoreValue( *m_xRightMarginEdit, MapUnit::MapTwip ); tools::Long nH = GetCoreValue( *m_xPaperHeightEdit, MapUnit::MapTwip ); tools::Long nW = GetCoreValue( *m_xPaperWidthEdit, MapUnit::MapTwip ); tools::Long nWidth = nBL + nBR + MINBODY; tools::Long nHeight = nBT + nBB + MINBODY; if ( nWidth <= nW && nHeight <= nH ) return; if ( nWidth > nW ) { tools::Long nTmp = nBL <= nBR ? nBR : nBL; nTmp -= nWidth - nW; if ( nBL <= nBR ) SetMetricValue( *m_xRightMarginEdit, nTmp, MapUnit::MapTwip ); else SetMetricValue( *m_xLeftMarginEdit, nTmp, MapUnit::MapTwip ); } if ( nHeight > nH ) { tools::Long nTmp = nBT <= nBB ? nBB : nBT; nTmp -= nHeight - nH; if ( nBT <= nBB ) SetMetricValue( *m_xBottomMarginEdit, nTmp, MapUnit::MapTwip ); else SetMetricValue( *m_xTopMarginEdit, nTmp, MapUnit::MapTwip ); } } IMPL_LINK_NOARG(SvxPageDescPage, CenterHdl_Impl, weld::Toggleable&, void) { m_aBspWin.SetHorz(m_xHorzBox->get_active()); m_aBspWin.SetVert(m_xVertBox->get_active()); UpdateExample_Impl(); } void SvxPageDescPage::SetCollectionList(const std::vector &aList) { OSL_ENSURE(!aList.empty(), "Empty string list"); sStandardRegister = aList[0]; m_xRegisterLB->freeze(); for (size_t i = 1; i < aList.size(); ++i) m_xRegisterLB->append_text(aList[i]); m_xRegisterLB->thaw(); m_xRegisterCB->show(); m_xRegisterFT->show(); m_xRegisterLB->show(); m_xRegisterCB->connect_toggled(LINK(this, SvxPageDescPage, RegisterModify)); } IMPL_LINK(SvxPageDescPage, RegisterModify, weld::Toggleable&, rBox, void) { bool bEnable = false; if (rBox.get_active()) { bEnable = true; if (m_xRegisterLB->get_active() == -1) m_xRegisterLB->set_active_text(sStandardRegister); } m_xRegisterFT->set_sensitive(bEnable); m_xRegisterLB->set_sensitive(bEnable); } void SvxPageDescPage::DisableVerticalPageDir() { m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_RL_TB); m_xTextFlowBox->remove_id(SvxFrameDirection::Vertical_LR_TB); if (m_xTextFlowBox->get_count() < 2) { m_xTextFlowLbl->hide(); m_xTextFlowBox->hide(); m_aBspWin.EnableFrameDirection( false ); } } IMPL_LINK_NOARG(SvxPageDescPage, FrameDirectionModify_Impl, weld::ComboBox&, void) { m_aBspWin.SetFrameDirection(m_xTextFlowBox->get_active_id()); m_aBspWin.Invalidate(); } bool SvxPageDescPage::IsPrinterRangeOverflow( weld::MetricSpinButton& rField, tools::Long nFirstMargin, tools::Long nLastMargin, MarginPosition nPos ) { bool bRet = false; bool bCheck = ( ( m_nPos & nPos ) == 0 ); tools::Long nValue = rField.get_value(FieldUnit::NONE); if ( bCheck && ( nValue < nFirstMargin || nValue > nLastMargin ) && rField.get_value_changed_from_saved() ) { rField.set_value(nValue < nFirstMargin ? nFirstMargin : nLastMargin, FieldUnit::NONE); bRet = true; } return bRet; } /** Check if a value of a margin edit is outside the printer paper margins and save this information. */ void SvxPageDescPage::CheckMarginEdits( bool _bClear ) { if ( _bClear ) m_nPos = 0; sal_Int64 nValue = m_xLeftMarginEdit->get_value(FieldUnit::NONE); if ( nValue < nFirstLeftMargin || nValue > nLastLeftMargin ) m_nPos |= MARGIN_LEFT; nValue = m_xRightMarginEdit->get_value(FieldUnit::NONE); if ( nValue < nFirstRightMargin || nValue > nLastRightMargin ) m_nPos |= MARGIN_RIGHT; nValue = m_xTopMarginEdit->get_value(FieldUnit::NONE); if ( nValue < nFirstTopMargin || nValue > nLastTopMargin ) m_nPos |= MARGIN_TOP; nValue = m_xBottomMarginEdit->get_value(FieldUnit::NONE); if ( nValue < nFirstBottomMargin || nValue > nLastBottomMargin ) m_nPos |= MARGIN_BOTTOM; } bool SvxPageDescPage::IsMarginOutOfRange() const { bool bRet = ( ( ( !( m_nPos & MARGIN_LEFT ) && m_xLeftMarginEdit->get_value_changed_from_saved() ) && ( m_xLeftMarginEdit->get_value(FieldUnit::NONE) < nFirstLeftMargin || m_xLeftMarginEdit->get_value(FieldUnit::NONE) > nLastLeftMargin ) ) || ( ( !( m_nPos & MARGIN_RIGHT ) && m_xRightMarginEdit->get_value_changed_from_saved() ) && ( m_xRightMarginEdit->get_value(FieldUnit::NONE) < nFirstRightMargin || m_xRightMarginEdit->get_value(FieldUnit::NONE) > nLastRightMargin ) ) || ( ( !( m_nPos & MARGIN_TOP ) && m_xTopMarginEdit->get_value_changed_from_saved() ) && ( m_xTopMarginEdit->get_value(FieldUnit::NONE) < nFirstTopMargin || m_xTopMarginEdit->get_value(FieldUnit::NONE) > nLastTopMargin ) ) || ( ( !( m_nPos & MARGIN_BOTTOM ) && m_xBottomMarginEdit->get_value_changed_from_saved() ) && ( m_xBottomMarginEdit->get_value(FieldUnit::NONE) < nFirstBottomMargin || m_xBottomMarginEdit->get_value(FieldUnit::NONE) > nLastBottomMargin ) ) ); return bRet; } void SvxPageDescPage::PageCreated(const SfxAllItemSet& aSet) { const SfxUInt16Item* pModeItem = aSet.GetItem(SID_ENUM_PAGE_MODE, false); const SfxUInt16Item* pPaperStartItem = aSet.GetItem(SID_PAPER_START, false); const SfxUInt16Item* pPaperEndItem = aSet.GetItem(SID_PAPER_END, false); const SfxStringListItem* pCollectListItem = aSet.GetItem(SID_COLLECT_LIST, false); const SfxBoolItem* pSupportDrawingLayerFillStyleItem = aSet.GetItem(SID_DRAWINGLAYER_FILLSTYLES, false); const SfxBoolItem* pIsImpressDoc = aSet.GetItem(SID_IMPRESS_DOC, false); if (pModeItem) { eMode = static_cast(pModeItem->GetValue()); } if(pPaperStartItem && pPaperEndItem) { SetPaperFormatRanges(static_cast(pPaperStartItem->GetValue())); } if(pCollectListItem) { SetCollectionList(pCollectListItem->GetList()); } if(pSupportDrawingLayerFillStyleItem) { const bool bNew(pSupportDrawingLayerFillStyleItem->GetValue()); mbEnableDrawingLayerFillStyles = bNew; } if (pIsImpressDoc) m_xNumberFormatText->set_label(SvxResId(STR_SLIDE_NUMBERS)); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */