/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include struct SbiParseStack { // "Stack" for statement-blocks SbiParseStack* pNext; // Chain SbiExprNode* pWithVar; SbiToken eExitTok; sal_uInt32 nChain; // JUMP-Chain }; struct SbiStatement { SbiToken eTok; void( SbiParser::*Func )(); bool bMain; // true: OK outside the SUB bool bSubr; // true: OK inside the SUB }; #define Y true #define N false static const SbiStatement StmntTable [] = { { ATTRIBUTE, &SbiParser::Attribute, Y, Y, }, // ATTRIBUTE { CALL, &SbiParser::Call, N, Y, }, // CALL { CLOSE, &SbiParser::Close, N, Y, }, // CLOSE { CONST_, &SbiParser::Dim, Y, Y, }, // CONST { DECLARE, &SbiParser::Declare, Y, N, }, // DECLARE { DEFBOOL, &SbiParser::DefXXX, Y, N, }, // DEFBOOL { DEFCUR, &SbiParser::DefXXX, Y, N, }, // DEFCUR { DEFDATE, &SbiParser::DefXXX, Y, N, }, // DEFDATE { DEFDBL, &SbiParser::DefXXX, Y, N, }, // DEFDBL { DEFERR, &SbiParser::DefXXX, Y, N, }, // DEFERR { DEFINT, &SbiParser::DefXXX, Y, N, }, // DEFINT { DEFLNG, &SbiParser::DefXXX, Y, N, }, // DEFLNG { DEFOBJ, &SbiParser::DefXXX, Y, N, }, // DEFOBJ { DEFSNG, &SbiParser::DefXXX, Y, N, }, // DEFSNG { DEFSTR, &SbiParser::DefXXX, Y, N, }, // DEFSTR { DEFVAR, &SbiParser::DefXXX, Y, N, }, // DEFVAR { DIM, &SbiParser::Dim, Y, Y, }, // DIM { DO, &SbiParser::DoLoop, N, Y, }, // DO { ELSE, &SbiParser::NoIf, N, Y, }, // ELSE { ELSEIF, &SbiParser::NoIf, N, Y, }, // ELSEIF { ENDIF, &SbiParser::NoIf, N, Y, }, // ENDIF { END, &SbiParser::Stop, N, Y, }, // END { ENUM, &SbiParser::Enum, Y, N, }, // TYPE { ERASE, &SbiParser::Erase, N, Y, }, // ERASE { ERROR_, &SbiParser::ErrorStmnt, N, Y, }, // ERROR { EXIT, &SbiParser::Exit, N, Y, }, // EXIT { FOR, &SbiParser::For, N, Y, }, // FOR { FUNCTION, &SbiParser::SubFunc, Y, N, }, // FUNCTION { GOSUB, &SbiParser::Goto, N, Y, }, // GOSUB { GLOBAL, &SbiParser::Dim, Y, N, }, // GLOBAL { GOTO, &SbiParser::Goto, N, Y, }, // GOTO { IF, &SbiParser::If, N, Y, }, // IF { IMPLEMENTS, &SbiParser::Implements, Y, N, }, // IMPLEMENTS { INPUT, &SbiParser::Input, N, Y, }, // INPUT { LET, &SbiParser::Assign, N, Y, }, // LET { LINE, &SbiParser::Line, N, Y, }, // LINE, -> LINE INPUT (#i92642) { LINEINPUT,&SbiParser::LineInput, N, Y, }, // LINE INPUT { LOOP, &SbiParser::BadBlock, N, Y, }, // LOOP { LSET, &SbiParser::LSet, N, Y, }, // LSET { NAME, &SbiParser::Name, N, Y, }, // NAME { NEXT, &SbiParser::BadBlock, N, Y, }, // NEXT { ON, &SbiParser::On, N, Y, }, // ON { OPEN, &SbiParser::Open, N, Y, }, // OPEN { OPTION, &SbiParser::Option, Y, N, }, // OPTION { PRINT, &SbiParser::Print, N, Y, }, // PRINT { PRIVATE, &SbiParser::Dim, Y, N, }, // PRIVATE { PROPERTY, &SbiParser::SubFunc, Y, N, }, // FUNCTION { PUBLIC, &SbiParser::Dim, Y, N, }, // PUBLIC { REDIM, &SbiParser::ReDim, N, Y, }, // DIM { RESUME, &SbiParser::Resume, N, Y, }, // RESUME { RETURN, &SbiParser::Return, N, Y, }, // RETURN { RSET, &SbiParser::RSet, N, Y, }, // RSET { SELECT, &SbiParser::Select, N, Y, }, // SELECT { SET, &SbiParser::Set, N, Y, }, // SET { STATIC, &SbiParser::Static, Y, Y, }, // STATIC { STOP, &SbiParser::Stop, N, Y, }, // STOP { SUB, &SbiParser::SubFunc, Y, N, }, // SUB { TYPE, &SbiParser::Type, Y, N, }, // TYPE { UNTIL, &SbiParser::BadBlock, N, Y, }, // UNTIL { WHILE, &SbiParser::While, N, Y, }, // WHILE { WEND, &SbiParser::BadBlock, N, Y, }, // WEND { WITH, &SbiParser::With, N, Y, }, // WITH { WRITE, &SbiParser::Write, N, Y, }, // WRITE { NIL, nullptr, N, N } }; SbiParser::SbiParser( StarBASIC* pb, SbModule* pm ) : SbiTokenizer( pm->GetSource32(), pb ), aGlobals( aGblStrings, SbGLOBAL, this ), aPublics( aGblStrings, SbPUBLIC, this ), aRtlSyms( aGblStrings, SbRTL, this ), aGen( *pm, this, 1024 ) { eEndTok = NIL; pProc = nullptr; pStack = nullptr; pWithVar = nullptr; nBase = 0; bGblDefs = bNewGblDefs = bSingleLineIf = bCodeCompleting = bExplicit = false; bClassModule = ( pm->GetModuleType() == css::script::ModuleType::CLASS ); pPool = &aPublics; for(SbxDataType & eDefType : eDefTypes) eDefType = SbxVARIANT; // no explicit default type aPublics.SetParent( &aGlobals ); aGlobals.SetParent( &aRtlSyms ); nGblChain = aGen.Gen( SbiOpcode::JUMP_, 0 ); rTypeArray = new SbxArray; // array for user defined types rEnumArray = new SbxArray; // array for Enum types bVBASupportOn = pm->IsVBACompat(); if ( bVBASupportOn ) EnableCompatibility(); } SbiParser::~SbiParser() { } // part of the runtime-library? SbiSymDef* SbiParser::CheckRTLForSym(const OUString& rSym, SbxDataType eType) { SbxVariable* pVar = GetBasic()->GetRtl()->Find(rSym, SbxClassType::DontCare); if (!pVar) return nullptr; if (SbxMethod* pMethod = dynamic_cast(pVar)) { SbiProcDef* pProc_ = aRtlSyms.AddProc( rSym ); if (pMethod->IsRuntimeFunction()) { pProc_->SetType( pMethod->GetRuntimeFunctionReturnType() ); } else { pProc_->SetType( pVar->GetType() ); } return pProc_; } SbiSymDef* pDef = aRtlSyms.AddSym(rSym); pDef->SetType(eType); return pDef; } // close global chain bool SbiParser::HasGlobalCode() { if( bGblDefs && nGblChain ) { aGen.BackChain( nGblChain ); aGen.Gen( SbiOpcode::LEAVE_ ); nGblChain = 0; } return bGblDefs; } void SbiParser::OpenBlock( SbiToken eTok, SbiExprNode* pVar ) { SbiParseStack* p = new SbiParseStack; p->eExitTok = eTok; p->nChain = 0; p->pWithVar = pWithVar; p->pNext = pStack; pStack = p; pWithVar = pVar; // #29955 service the for-loop level if( eTok == FOR ) aGen.IncForLevel(); } void SbiParser::CloseBlock() { if( pStack ) { SbiParseStack* p = pStack; // #29955 service the for-loop level if( p->eExitTok == FOR ) aGen.DecForLevel(); aGen.BackChain( p->nChain ); pStack = p->pNext; pWithVar = p->pWithVar; delete p; } } // EXIT ... void SbiParser::Exit() { SbiToken eTok = Next(); for( SbiParseStack* p = pStack; p; p = p->pNext ) { SbiToken eExitTok = p->eExitTok; if( eTok == eExitTok || (eTok == PROPERTY && (eExitTok == GET || eExitTok == LET) ) ) // #i109051 { p->nChain = aGen.Gen( SbiOpcode::JUMP_, p->nChain ); return; } } if( pStack ) Error( ERRCODE_BASIC_EXPECTED, pStack->eExitTok ); else Error( ERRCODE_BASIC_BAD_EXIT ); } bool SbiParser::TestSymbol() { Peek(); if( eCurTok == SYMBOL ) { Next(); return true; } Error( ERRCODE_BASIC_SYMBOL_EXPECTED ); return false; } bool SbiParser::TestToken( SbiToken t ) { if( Peek() == t ) { Next(); return true; } else { Error( ERRCODE_BASIC_EXPECTED, t ); return false; } } bool SbiParser::TestComma() { SbiToken eTok = Peek(); if( IsEoln( eTok ) ) { Next(); return false; } else if( eTok != COMMA ) { Error( ERRCODE_BASIC_EXPECTED, COMMA ); return false; } Next(); return true; } void SbiParser::TestEoln() { if( !IsEoln( Next() ) ) { Error( ERRCODE_BASIC_EXPECTED, EOLN ); while( !IsEoln( Next() ) ) {} } } void SbiParser::StmntBlock( SbiToken eEnd ) { SbiToken xe = eEndTok; eEndTok = eEnd; while( !bAbort && Parse() ) {} eEndTok = xe; if( IsEof() ) { Error( ERRCODE_BASIC_BAD_BLOCK, eEnd ); bAbort = true; } } void SbiParser::SetCodeCompleting( bool b ) { bCodeCompleting = b; } bool SbiParser::Parse() { if( bAbort ) return false; EnableErrors(); bErrorIsSymbol = false; Peek(); bErrorIsSymbol = true; if( IsEof() ) { // AB #33133: If no sub has been created before, // the global chain must be closed here! // AB #40689: Due to the new static-handling there // can be another nGblChain, so ask for it before. if( bNewGblDefs && nGblChain == 0 ) nGblChain = aGen.Gen( SbiOpcode::JUMP_, 0 ); return false; } if( IsEoln( eCurTok ) ) { Next(); return true; } if( !bSingleLineIf && MayBeLabel( true ) ) { // is a label if( !pProc ) Error( ERRCODE_BASIC_NOT_IN_MAIN, aSym ); else pProc->GetLabels().Define( aSym ); Next(); Peek(); if( IsEoln( eCurTok ) ) { Next(); return true; } } // end of parsing? if( eCurTok == eEndTok || ( bVBASupportOn && // #i109075 (eCurTok == ENDFUNC || eCurTok == ENDPROPERTY || eCurTok == ENDSUB) && (eEndTok == ENDFUNC || eEndTok == ENDPROPERTY || eEndTok == ENDSUB) ) ) { Next(); if( eCurTok != NIL ) aGen.Statement(); return false; } // comment? if( eCurTok == REM ) { Next(); return true; } // In vba it's possible to do Error.foobar ( even if it results in // a runtime error if ( eCurTok == ERROR_ && IsVBASupportOn() ) // we probably need to define a subset of keywords where this madness applies e.g. if ( IsVBASupportOn() && SymbolCanBeRedined( eCurTok ) ) { SbiTokenizer tokens( *this ); tokens.Next(); if ( tokens.Peek() == DOT ) { eCurTok = SYMBOL; ePush = eCurTok; } } // if there's a symbol, it's either a variable (LET) // or a SUB-procedure (CALL without brackets) // DOT for assignments in the WITH-block: .A=5 if( eCurTok == SYMBOL || eCurTok == DOT ) { if( !pProc ) Error( ERRCODE_BASIC_EXPECTED, SUB ); else { // for correct line and column... Next(); Push( eCurTok ); aGen.Statement(); Symbol(nullptr); } } else { Next(); // statement parsers const SbiStatement* p; for( p = StmntTable; p->eTok != NIL; p++ ) if( p->eTok == eCurTok ) break; if( p->eTok != NIL ) { if( !pProc && !p->bMain ) Error( ERRCODE_BASIC_NOT_IN_MAIN, eCurTok ); else if( pProc && !p->bSubr ) Error( ERRCODE_BASIC_NOT_IN_SUBR, eCurTok ); else { // AB #41606/#40689: Due to the new static-handling there // can be another nGblChain, so ask for it before. if( bNewGblDefs && nGblChain == 0 && ( eCurTok == SUB || eCurTok == FUNCTION || eCurTok == PROPERTY ) ) { nGblChain = aGen.Gen( SbiOpcode::JUMP_, 0 ); bNewGblDefs = false; } // statement-opcode at the beginning of a sub, too, please if( ( p->bSubr && (eCurTok != STATIC || Peek() == SUB || Peek() == FUNCTION ) ) || eCurTok == SUB || eCurTok == FUNCTION ) aGen.Statement(); (this->*( p->Func ) )(); ErrCode nSbxErr = SbxBase::GetError(); if( nSbxErr ) { SbxBase::ResetError(); Error( nSbxErr ); } } } else Error( ERRCODE_BASIC_UNEXPECTED, eCurTok ); } // test for the statement's end - // might also be an ELSE, as there must not necessary be a : before the ELSE! if( !IsEos() ) { Peek(); if( !IsEos() && eCurTok != ELSE ) { // if the parsing has been aborted, jump over to the ":" Error( ERRCODE_BASIC_UNEXPECTED, eCurTok ); while( !IsEos() ) Next(); } } // The parser aborts at the end, the // next token has not been fetched yet! return true; } SbiExprNode* SbiParser::GetWithVar() { if( pWithVar ) return pWithVar; SbiParseStack* p = pStack; while( p ) { // LoopVar can at the moment only be for with if( p->pWithVar ) return p->pWithVar; p = p->pNext; } return nullptr; } // assignment or subroutine call void SbiParser::Symbol( const KeywordSymbolInfo* pKeywordSymbolInfo ) { SbiExprMode eMode = bVBASupportOn ? EXPRMODE_STANDALONE : EXPRMODE_STANDARD; SbiExpression aVar( this, SbSYMBOL, eMode, pKeywordSymbolInfo ); bool bEQ = ( Peek() == EQ ); if( !bEQ && bVBASupportOn && aVar.IsBracket() ) Error( ERRCODE_BASIC_EXPECTED, "=" ); RecursiveMode eRecMode = ( bEQ ? PREVENT_CALL : FORCE_CALL ); bool bSpecialMidHandling = false; SbiSymDef* pDef = aVar.GetRealVar(); if( bEQ && pDef && pDef->GetScope() == SbRTL ) { OUString aRtlName = pDef->GetName(); if( aRtlName.equalsIgnoreAsciiCase("Mid") ) { SbiExprNode* pExprNode = aVar.GetExprNode(); if( pExprNode && pExprNode->GetNodeType() == SbxVARVAL ) { SbiExprList* pPar = pExprNode->GetParameters(); short nParCount = pPar ? pPar->GetSize() : 0; if( nParCount == 2 || nParCount == 3 ) { if( nParCount == 2 ) pPar->addExpression( std::make_unique( this, -1, SbxLONG ) ); TestToken( EQ ); pPar->addExpression( std::make_unique( this ) ); bSpecialMidHandling = true; } } } } aVar.Gen( eRecMode ); if( !bSpecialMidHandling ) { if( !bEQ ) { aGen.Gen( SbiOpcode::GET_ ); } else { // so it must be an assignment! if( !aVar.IsLvalue() ) Error( ERRCODE_BASIC_LVALUE_EXPECTED ); TestToken( EQ ); SbiExpression aExpr( this ); aExpr.Gen(); SbiOpcode eOp = SbiOpcode::PUT_; if( pDef ) { if( pDef->GetConstDef() ) Error( ERRCODE_BASIC_DUPLICATE_DEF, pDef->GetName() ); if( pDef->GetType() == SbxOBJECT ) { eOp = SbiOpcode::SET_; if( pDef->GetTypeId() ) { aGen.Gen( SbiOpcode::SETCLASS_, pDef->GetTypeId() ); return; } } } aGen.Gen( eOp ); } } } void SbiParser::Assign() { SbiExpression aLvalue( this, SbLVALUE ); TestToken( EQ ); SbiExpression aExpr( this ); aLvalue.Gen(); aExpr.Gen(); sal_uInt16 nLen = 0; SbiSymDef* pDef = aLvalue.GetRealVar(); { if( pDef->GetConstDef() ) Error( ERRCODE_BASIC_DUPLICATE_DEF, pDef->GetName() ); nLen = aLvalue.GetRealVar()->GetLen(); } if( nLen ) aGen.Gen( SbiOpcode::PAD_, nLen ); aGen.Gen( SbiOpcode::PUT_ ); } // assignments of an object-variable void SbiParser::Set() { SbiExpression aLvalue( this, SbLVALUE ); SbxDataType eType = aLvalue.GetType(); if( eType != SbxOBJECT && eType != SbxEMPTY && eType != SbxVARIANT ) Error( ERRCODE_BASIC_INVALID_OBJECT ); TestToken( EQ ); SbiSymDef* pDef = aLvalue.GetRealVar(); if( pDef->GetConstDef() ) Error( ERRCODE_BASIC_DUPLICATE_DEF, pDef->GetName() ); SbiToken eTok = Peek(); if( eTok == NEW ) { Next(); SbiSymDef* pTypeDef = new SbiSymDef( OUString() ); TypeDecl( *pTypeDef, true ); aLvalue.Gen(); aGen.Gen( SbiOpcode::CREATE_, pDef->GetId(), pTypeDef->GetTypeId() ); aGen.Gen( SbiOpcode::SETCLASS_, pDef->GetTypeId() ); } else { SbiExpression aExpr( this ); aLvalue.Gen(); aExpr.Gen(); // It's a good idea to distinguish between // set something = another & // something = another // ( it's necessary for vba objects where set is object // specific and also doesn't involve processing default params ) if( pDef->GetTypeId() ) { if ( bVBASupportOn ) aGen.Gen( SbiOpcode::VBASETCLASS_, pDef->GetTypeId() ); else aGen.Gen( SbiOpcode::SETCLASS_, pDef->GetTypeId() ); } else { if ( bVBASupportOn ) aGen.Gen( SbiOpcode::VBASET_ ); else aGen.Gen( SbiOpcode::SET_ ); } } } // JSM 07.10.95 void SbiParser::LSet() { SbiExpression aLvalue( this, SbLVALUE ); if( aLvalue.GetType() != SbxSTRING ) { Error( ERRCODE_BASIC_INVALID_OBJECT ); } TestToken( EQ ); SbiSymDef* pDef = aLvalue.GetRealVar(); if( pDef && pDef->GetConstDef() ) { Error( ERRCODE_BASIC_DUPLICATE_DEF, pDef->GetName() ); } SbiExpression aExpr( this ); aLvalue.Gen(); aExpr.Gen(); aGen.Gen( SbiOpcode::LSET_ ); } // JSM 07.10.95 void SbiParser::RSet() { SbiExpression aLvalue( this, SbLVALUE ); if( aLvalue.GetType() != SbxSTRING ) { Error( ERRCODE_BASIC_INVALID_OBJECT ); } TestToken( EQ ); SbiSymDef* pDef = aLvalue.GetRealVar(); if( pDef && pDef->GetConstDef() ) Error( ERRCODE_BASIC_DUPLICATE_DEF, pDef->GetName() ); SbiExpression aExpr( this ); aLvalue.Gen(); aExpr.Gen(); aGen.Gen( SbiOpcode::RSET_ ); } // DEFINT, DEFLNG, DEFSNG, DEFDBL, DEFSTR and so on void SbiParser::DefXXX() { sal_Unicode ch1, ch2; SbxDataType t = SbxDataType( eCurTok - DEFINT + SbxINTEGER ); while( !bAbort ) { if( Next() != SYMBOL ) break; ch1 = rtl::toAsciiUpperCase(aSym[0]); ch2 = 0; if( Peek() == MINUS ) { Next(); if( Next() != SYMBOL ) Error( ERRCODE_BASIC_SYMBOL_EXPECTED ); else { ch2 = rtl::toAsciiUpperCase(aSym[0]); if( ch2 < ch1 ) { Error( ERRCODE_BASIC_SYNTAX ); ch2 = 0; } } } if (!ch2) ch2 = ch1; ch1 -= 'A'; ch2 -= 'A'; for (; ch1 <= ch2; ch1++) eDefTypes[ ch1 ] = t; if( !TestComma() ) break; } } // STOP/SYSTEM void SbiParser::Stop() { aGen.Gen( SbiOpcode::STOP_ ); Peek(); // #35694: only Peek(), so that EOL is recognized in Single-Line-If } // IMPLEMENTS void SbiParser::Implements() { if( !bClassModule ) { Error( ERRCODE_BASIC_UNEXPECTED, IMPLEMENTS ); return; } Peek(); if( eCurTok != SYMBOL ) { Error( ERRCODE_BASIC_SYMBOL_EXPECTED ); return; } OUString aImplementedIface = aSym; Next(); if( Peek() == DOT ) { OUString aDotStr( '.' ); while( Peek() == DOT ) { aImplementedIface += aDotStr; Next(); SbiToken ePeekTok = Peek(); if( ePeekTok == SYMBOL || IsKwd( ePeekTok ) ) { Next(); aImplementedIface += aSym; } else { Next(); Error( ERRCODE_BASIC_SYMBOL_EXPECTED ); break; } } } aIfaceVector.push_back( aImplementedIface ); } void SbiParser::EnableCompatibility() { if( !bCompatible ) AddConstants(); bCompatible = true; } // OPTION void SbiParser::Option() { switch( Next() ) { case BASIC_EXPLICIT: bExplicit = true; break; case BASE: if( Next() == NUMBER && ( nVal == 0 || nVal == 1 ) ) { nBase = static_cast(nVal); break; } Error( ERRCODE_BASIC_EXPECTED, "0/1" ); break; case PRIVATE: { OUString aString = SbiTokenizer::Symbol(Next()); if( !aString.equalsIgnoreAsciiCase("Module") ) { Error( ERRCODE_BASIC_EXPECTED, "Module" ); } break; } case COMPARE: { SbiToken eTok = Next(); if( eTok == BINARY ) { } else if( eTok == SYMBOL && GetSym().equalsIgnoreAsciiCase("text") ) { } else { Error( ERRCODE_BASIC_EXPECTED, "Text/Binary" ); } break; } case COMPATIBLE: EnableCompatibility(); break; case CLASSMODULE: bClassModule = true; aGen.GetModule().SetModuleType( css::script::ModuleType::CLASS ); break; case VBASUPPORT: // Option VBASupport used to override the module mode ( in fact this must reset the mode if( Next() == NUMBER ) { if ( nVal == 1 || nVal == 0 ) { bVBASupportOn = ( nVal == 1 ); if ( bVBASupportOn ) { EnableCompatibility(); } // if the module setting is different // reset it to what the Option tells us if ( bVBASupportOn != aGen.GetModule().IsVBACompat() ) { aGen.GetModule().SetVBACompat( bVBASupportOn ); } break; } } Error( ERRCODE_BASIC_EXPECTED, "0/1" ); break; default: Error( ERRCODE_BASIC_BAD_OPTION, eCurTok ); } } static void addStringConst( SbiSymPool& rPool, const OUString& pSym, const OUString& rStr ) { SbiConstDef* pConst = new SbiConstDef( pSym ); pConst->SetType( SbxSTRING ); pConst->Set( rStr ); rPool.Add( pConst ); } void SbiParser::AddConstants() { // #113063 Create constant RTL symbols addStringConst( aPublics, "vbCr", "\x0D" ); addStringConst( aPublics, "vbCrLf", "\x0D\x0A" ); addStringConst( aPublics, "vbFormFeed", "\x0C" ); addStringConst( aPublics, "vbLf", "\x0A" ); #ifdef _WIN32 addStringConst( aPublics, "vbNewLine", "\x0D\x0A" ); #else addStringConst( aPublics, "vbNewLine", "\x0A" ); #endif addStringConst( aPublics, "vbNullString", "" ); addStringConst( aPublics, "vbTab", "\x09" ); addStringConst( aPublics, "vbVerticalTab", "\x0B" ); // Force length 1 and make char 0 afterwards OUString aNullCharStr(u'\0'); addStringConst( aPublics, "vbNullChar", aNullCharStr ); } // ERROR n void SbiParser::ErrorStmnt() { SbiExpression aPar( this ); aPar.Gen(); aGen.Gen( SbiOpcode::ERROR_ ); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */