diff options
Diffstat (limited to 'xmlsecurity/workben/signaturetest.cxx')
| -rw-r--r-- | xmlsecurity/workben/signaturetest.cxx | 543 |
1 files changed, 543 insertions, 0 deletions
diff --git a/xmlsecurity/workben/signaturetest.cxx b/xmlsecurity/workben/signaturetest.cxx new file mode 100644 index 000000000000..2d5719cb4877 --- /dev/null +++ b/xmlsecurity/workben/signaturetest.cxx @@ -0,0 +1,543 @@ +/************************************************************************* + * + * $RCSfile: signaturetest.cxx,v $ + * + * $Revision: 1.1.1.1 $ + * + * last change: $Author: mt $ $Date: 2004-07-12 13:15:31 $ + * + * The Contents of this file are made available subject to the terms of + * either of the following licenses + * + * - GNU Lesser General Public License Version 2.1 + * - Sun Industry Standards Source License Version 1.1 + * + * Sun Microsystems Inc., October, 2000 + * + * GNU Lesser General Public License Version 2.1 + * ============================================= + * Copyright 2000 by Sun Microsystems, Inc. + * 901 San Antonio Road, Palo Alto, CA 94303, USA + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License version 2.1, as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Sun Industry Standards Source License Version 1.1 + * ================================================= + * The contents of this file are subject to the Sun Industry Standards + * Source License Version 1.1 (the "License"); You may not use this file + * except in compliance with the License. You may obtain a copy of the + * License at http://www.openoffice.org/license.html. + * + * Software provided under this License is provided on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, + * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, + * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. + * See the License for the specific provisions governing your rights and + * obligations concerning the Software. + * + * The Initial Developer of the Original Code is: Sun Microsystems, Inc. + * + * Copyright: 2000 by Sun Microsystems, Inc. + * + * All Rights Reserved. + * + * Contributor(s): _______________________________________ + * + * + ************************************************************************/ + +#include <sal/main.h> +#include <vcl/event.hxx> +#include <vcl/svapp.hxx> +#include <vcl/wrkwin.hxx> +#include <vcl/msgbox.hxx> +#include <vcl/fixed.hxx> +#include <vcl/edit.hxx> +#include <vcl/button.hxx> +#include <vcl/lstbox.hxx> +#include <svtools/filectrl.hxx> +#include <tools/urlobj.hxx> +#include <osl/file.hxx> + +#include <svtools/docpasswdrequest.hxx> + +#include <comphelper/processfactory.hxx> +#include <cppuhelper/servicefactory.hxx> +#include <cppuhelper/bootstrap.hxx> +#include <unotools/streamhelper.hxx> + +#include <ucbhelper/contentbroker.hxx> +#include <ucbhelper/configurationkeys.hxx> + +// Will be in comphelper if CWS MAV09 is integrated +#include <storagehelper.hxx> + +#include <com/sun/star/lang/XMultiServiceFactory.hpp> + +#include <xmlsecurity/xmlsignaturehelper.hxx> +#include <xmlsecurity/digitalsignaturesdialog.hxx> +#include <xmlsecurity/certificatechooser.hxx> + +#include <com/sun/star/security/XDocumentDigitalSignatures.hpp> + + +using namespace ::com::sun::star; +using namespace ::com::sun::star; + +void Main(); + +#define TEXTFIELDWIDTH 80 +#define TEXTFIELDSTARTX 10 + +#define EDITWIDTH 200 +#define EDITHEIGHT 20 + +#define FIXEDLINEHEIGHT 15 + +#define BUTTONWIDTH 50 +#define BUTTONHEIGHT 22 +#define BUTTONSPACE 20 + +#define LISTBOXHEIGHT 120 + +bool bStoreSignatureInStorage = false; + + +// ----------------------------------------------------------------------- + + SAL_IMPLEMENT_MAIN() +{ + uno::Reference< lang::XMultiServiceFactory > xMSF; + try + { + uno::Reference< uno::XComponentContext > xCtx( cppu::defaultBootstrap_InitialComponentContext() ); + if ( !xCtx.is() ) + { + DBG_ERROR( "Error creating initial component context!" ); + return -1; + } + + xMSF = uno::Reference< lang::XMultiServiceFactory >(xCtx->getServiceManager(), uno::UNO_QUERY ); + + if ( !xMSF.is() ) + { + DBG_ERROR( "No service manager!" ); + return -1; + } + + // Init USB + uno::Sequence< uno::Any > aArgs( 2 ); + aArgs[ 0 ] <<= rtl::OUString::createFromAscii( UCB_CONFIGURATION_KEY1_LOCAL ); + aArgs[ 1 ] <<= rtl::OUString::createFromAscii( UCB_CONFIGURATION_KEY2_OFFICE ); + sal_Bool bSuccess = ::ucb::ContentBroker::initialize( xMSF, aArgs ); + if ( !bSuccess ) + { + DBG_ERROR( "Error creating UCB!" ); + return -1; + } + + } + catch ( uno::Exception const & ) + { + DBG_ERROR( "Exception during creation of initial component context!" ); + return -1; + } + comphelper::setProcessServiceFactory( xMSF ); + + InitVCL( xMSF ); + ::Main(); + DeInitVCL(); + + return 0; +} + +// ----------------------------------------------------------------------- + +class MyWin : public WorkWindow +{ +private: + FixedLine maTokenLine; + CheckBox maCryptoCheckBox; + FixedText maFixedTextTokenName; + FileControl maEditTokenName; + FixedLine maTest1Line; + FixedText maFixedTextXMLFileName; + FileControl maEditXMLFileName; + FixedText maFixedTextBINFileName; + FileControl maEditBINFileName; + FixedText maFixedTextSIGFileName; + FileControl maEditSIGFileName; + PushButton maSignButton; + PushButton maVerifyButton; + FixedLine maTest2Line; + FixedText maFixedTextDOCFileName; + FileControl maEditDOCFileName; + PushButton maDigitalSignaturesButton; + FixedLine maHintLine; + FixedText maHintText; + + DECL_LINK( CryptoCheckBoxHdl, CheckBox* ); + DECL_LINK( SignButtonHdl, Button* ); + DECL_LINK( VerifyButtonHdl, Button* ); + DECL_LINK( DigitalSignaturesWithServiceHdl, Button* ); + DECL_LINK( DigitalSignaturesWithTokenHdl, Button* ); + DECL_LINK( StartVerifySignatureHdl, void* ); + +public: + MyWin( Window* pParent, WinBits nWinStyle ); + +}; + +// ----------------------------------------------------------------------- + +void Main() +{ + MyWin aMainWin( NULL, WB_APP | WB_STDWORK | WB_3DLOOK); + aMainWin.Show(); + + Application::Execute(); +} + +// ----------------------------------------------------------------------- + +MyWin::MyWin( Window* pParent, WinBits nWinStyle ) : + WorkWindow( pParent, nWinStyle ), + maTokenLine( this ), + maTest1Line( this ), + maTest2Line( this ), + maHintLine( this ), + maFixedTextXMLFileName( this ), + maEditXMLFileName( this, WB_BORDER ), + maFixedTextBINFileName( this ), + maEditBINFileName( this, WB_BORDER ), + maFixedTextSIGFileName( this ), + maEditSIGFileName( this, WB_BORDER ), + maFixedTextTokenName( this ), + maEditTokenName( this, WB_BORDER ), + maFixedTextDOCFileName( this ), + maEditDOCFileName( this, WB_BORDER ), + maSignButton( this ), + maVerifyButton( this ), + maDigitalSignaturesButton( this ), + maHintText( this, WB_WORDBREAK ), + maCryptoCheckBox( this ) + +{ + Size aOutputSize( 400, 600 ); + SetOutputSizePixel( aOutputSize ); + SetText( String( RTL_CONSTASCII_USTRINGPARAM( "XML Signature Test" ) ) ); + + long nY = 15; + + maTokenLine.SetPosSizePixel( TEXTFIELDSTARTX, nY, aOutputSize.Width()-2*TEXTFIELDSTARTX, FIXEDLINEHEIGHT ); + maTokenLine.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Crypto Settings" ) ) ); + maTokenLine.Show(); + + nY += EDITHEIGHT*3/2; + + maCryptoCheckBox.SetPosSizePixel( TEXTFIELDSTARTX, nY, aOutputSize.Width()-2*TEXTFIELDSTARTX, FIXEDLINEHEIGHT ); + maCryptoCheckBox.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Use Default Token" ) ) ); + maCryptoCheckBox.Check( TRUE ); + maEditTokenName.Disable(); + maFixedTextTokenName.Disable(); + maCryptoCheckBox.SetClickHdl( LINK( this, MyWin, CryptoCheckBoxHdl ) ); + + + maCryptoCheckBox.Show(); + + nY += EDITHEIGHT; + + maFixedTextTokenName.SetPosSizePixel( TEXTFIELDSTARTX, nY, TEXTFIELDWIDTH, EDITHEIGHT ); + maFixedTextTokenName.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Crypto Token:" ) ) ); + maFixedTextTokenName.Show(); + + maEditTokenName.SetPosSizePixel( TEXTFIELDSTARTX+TEXTFIELDWIDTH, nY, EDITWIDTH, EDITHEIGHT ); + maEditTokenName.Show(); + + nY += EDITHEIGHT*3; + + maTest1Line.SetPosSizePixel( TEXTFIELDSTARTX, nY, aOutputSize.Width()-2*TEXTFIELDSTARTX, FIXEDLINEHEIGHT ); + maTest1Line.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Test 1 - Simple Files" ) ) ); + maTest1Line.Show(); + + nY += EDITHEIGHT*3/2; + + maFixedTextXMLFileName.SetPosSizePixel( TEXTFIELDSTARTX, nY, TEXTFIELDWIDTH, EDITHEIGHT ); + maFixedTextXMLFileName.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "XML File:" ) ) ); + maFixedTextXMLFileName.Show(); + + maEditXMLFileName.SetPosSizePixel( TEXTFIELDSTARTX+TEXTFIELDWIDTH, nY, EDITWIDTH, EDITHEIGHT ); + maEditXMLFileName.Show(); + + nY += EDITHEIGHT*3/2; + + maFixedTextBINFileName.SetPosSizePixel( TEXTFIELDSTARTX, nY, TEXTFIELDWIDTH, EDITHEIGHT ); + maFixedTextBINFileName.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Binary File:" ) ) ); + maFixedTextBINFileName.Show(); + + maEditBINFileName.SetPosSizePixel( TEXTFIELDSTARTX+TEXTFIELDWIDTH, nY, EDITWIDTH, EDITHEIGHT ); + maEditBINFileName.Show(); + + nY += EDITHEIGHT*3/2; + + maFixedTextSIGFileName.SetPosSizePixel( TEXTFIELDSTARTX, nY, TEXTFIELDWIDTH, EDITHEIGHT ); + maFixedTextSIGFileName.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Signature File:" ) ) ); + maFixedTextSIGFileName.Show(); + + maEditSIGFileName.SetPosSizePixel( TEXTFIELDSTARTX+TEXTFIELDWIDTH, nY, EDITWIDTH, EDITHEIGHT ); + maEditSIGFileName.Show(); + + nY += EDITHEIGHT*2; + + maSignButton.SetPosSizePixel( TEXTFIELDSTARTX, nY, BUTTONWIDTH, BUTTONHEIGHT ); + maSignButton.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Sign" ) ) ); + maSignButton.SetClickHdl( LINK( this, MyWin, SignButtonHdl ) ); + maSignButton.Show(); + + maVerifyButton.SetPosSizePixel( TEXTFIELDSTARTX+BUTTONWIDTH+BUTTONSPACE, nY, BUTTONWIDTH, BUTTONHEIGHT ); + maVerifyButton.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Verify" ) ) ); + maVerifyButton.SetClickHdl( LINK( this, MyWin, VerifyButtonHdl ) ); + maVerifyButton.Show(); + + nY += EDITHEIGHT*3; + + maTest2Line.SetPosSizePixel( TEXTFIELDSTARTX, nY, aOutputSize.Width()-2*TEXTFIELDSTARTX, FIXEDLINEHEIGHT ); + maTest2Line.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Test 2 - Office Document" ) ) ); + maTest2Line.Show(); + + nY += EDITHEIGHT*3/2; + + maFixedTextDOCFileName.SetPosSizePixel( TEXTFIELDSTARTX, nY, TEXTFIELDWIDTH, EDITHEIGHT ); + maFixedTextDOCFileName.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Office File:" ) ) ); + maFixedTextDOCFileName.Show(); + + maEditDOCFileName.SetPosSizePixel( TEXTFIELDSTARTX+TEXTFIELDWIDTH, nY, EDITWIDTH, EDITHEIGHT ); + maEditDOCFileName.Show(); + + nY += EDITHEIGHT*2; + + maDigitalSignaturesButton.SetPosSizePixel( TEXTFIELDSTARTX, nY, BUTTONWIDTH*2, BUTTONHEIGHT ); + maDigitalSignaturesButton.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Digital Signatures..." ) ) ); + maDigitalSignaturesButton.SetClickHdl( LINK( this, MyWin, DigitalSignaturesWithServiceHdl ) ); + maDigitalSignaturesButton.Show(); + + nY += EDITHEIGHT*3; + + maHintLine.SetPosSizePixel( TEXTFIELDSTARTX, nY, aOutputSize.Width()-2*TEXTFIELDSTARTX, FIXEDLINEHEIGHT ); + maHintLine.Show(); + + nY += EDITHEIGHT*2; + + maHintText.SetPosSizePixel( TEXTFIELDSTARTX, nY, aOutputSize.Width()-2*TEXTFIELDSTARTX, aOutputSize.Height()-nY ); + maHintText.SetText( String( RTL_CONSTASCII_USTRINGPARAM( "Hint: Copy crypto files from xmlsecurity/tools/cryptoken/nss and sample files from xmlsecurity/tools/examples to <temp>/nss.\nThis location will be used from the demo as the default location." ) ) ); + maHintText.Show(); + + // Help the user with some default values + ::rtl::OUString aTempDirURL; + ::osl::File::getTempDirURL( aTempDirURL ); + INetURLObject aURLObj( aTempDirURL ); + aURLObj.insertName( String( RTL_CONSTASCII_USTRINGPARAM( "nss" ) ), true ); + ::rtl::OUString aNSSFolder = aURLObj.getFSysPath( INetURLObject::FSYS_DETECT ); + String aDefaultXMLFileName( aNSSFolder ); + maEditXMLFileName.SetText( aNSSFolder + String( RTL_CONSTASCII_USTRINGPARAM( "demo-sample.xml" ) ) ); + maEditBINFileName.SetText( aNSSFolder + String( RTL_CONSTASCII_USTRINGPARAM( "demo-sample.gif" ) ) ); + maEditDOCFileName.SetText( aNSSFolder + String( RTL_CONSTASCII_USTRINGPARAM( "demo-sample.sxw" ) ) ); + maEditSIGFileName.SetText( aNSSFolder + String( RTL_CONSTASCII_USTRINGPARAM( "demo-result.xml" ) ) ); + maEditTokenName.SetText( aNSSFolder ); +} + +IMPL_LINK( MyWin, CryptoCheckBoxHdl, CheckBox*, EMPTYARG ) +{ + if ( maCryptoCheckBox.IsChecked() ) + { + maEditTokenName.Disable(); + maFixedTextTokenName.Disable(); + } + else + { + maEditTokenName.Enable(); + maFixedTextTokenName.Enable(); + } + return 1; +} + +IMPL_LINK( MyWin, SignButtonHdl, Button*, EMPTYARG ) +{ + String aXMLFileName = maEditXMLFileName.GetText(); + String aBINFileName = maEditBINFileName.GetText(); + String aSIGFileName = maEditSIGFileName.GetText(); + + String aTokenFileName; + if ( !maCryptoCheckBox.IsChecked() ) + aTokenFileName = maEditTokenName.GetText(); + + XMLSignatureHelper aSignatureHelper( comphelper::getProcessServiceFactory() ); + bool bInit = aSignatureHelper.Init( aTokenFileName ); + + if ( !bInit ) + { + ErrorBox( this, WB_OK, String( RTL_CONSTASCII_USTRINGPARAM( "Error initializing security context!" ) ) ).Execute(); + return 0; + } + + uno::Reference< ::com::sun::star::security::XCertificate > xCertToUse; + CertificateChooser aChooser( this, aSignatureHelper.GetSecurityEnvironment(), SignatureInformations() ); + if ( aChooser.Execute() ) + xCertToUse = aChooser.GetSelectedCertificate(); + + if ( !xCertToUse.is() ) + return 0; + + + aSignatureHelper.StartMission(); + + sal_Int32 nSecurityId = aSignatureHelper.GetNewSecurityId(); + + aSignatureHelper.SetX509Certificate( nSecurityId, xCertToUse->getIssuerName(), bigIntegerToNumericString( xCertToUse->getSerialNumber() ) ); + + aSignatureHelper.AddForSigning( nSecurityId, aXMLFileName, aXMLFileName, sal_False ); + aSignatureHelper.AddForSigning( nSecurityId, aBINFileName, aBINFileName, sal_True ); + + SvFileStream* pStream = new SvFileStream( aSIGFileName, STREAM_WRITE ); + SvLockBytesRef xLockBytes = new SvLockBytes( pStream, TRUE ); + uno::Reference< io::XOutputStream > xOutputStream = new utl::OOutputStreamHelper( xLockBytes ); + bool bDone = aSignatureHelper.CreateAndWriteSignatue( xOutputStream ); + + aSignatureHelper.EndMission(); + + if ( !bDone ) + { + ErrorBox( this, WB_OK, String( RTL_CONSTASCII_USTRINGPARAM( "Error creating Signature!" ) ) ).Execute(); + } + else + { + rtl::OUString aInfo( String( RTL_CONSTASCII_USTRINGPARAM( "Signature successfully created!\n\n" ) ) ); + // aInfo += getSignatureInformationmations( aSignatureHelper.getAllSignatureInformation(), aSignatureHelper.GetSecurityEnvironment() ); + + + InfoBox( this, aInfo ).Execute(); + } + + // Check for more detailed results... + + return 0; +} + +IMPL_LINK( MyWin, VerifyButtonHdl, Button*, EMPTYARG ) +{ + String aXMLFileName = maEditXMLFileName.GetText(); + String aBINFileName = maEditBINFileName.GetText(); + String aSIGFileName = maEditSIGFileName.GetText(); + + String aTokenFileName; + if ( !maCryptoCheckBox.IsChecked() ) + aTokenFileName = maEditTokenName.GetText(); + + XMLSignatureHelper aSignatureHelper( comphelper::getProcessServiceFactory() ); + bool bInit = aSignatureHelper.Init( aTokenFileName ); + + if ( !bInit ) + { + ErrorBox( this, WB_OK, String( RTL_CONSTASCII_USTRINGPARAM( "Error initializing security context!" ) ) ).Execute(); + return 0; + } + + aSignatureHelper.SetStartVerifySignatureHdl( LINK( this, MyWin, StartVerifySignatureHdl ) ); + + aSignatureHelper.StartMission(); + + SvFileStream* pStream = new SvFileStream( aSIGFileName, STREAM_READ ); + pStream->Seek( STREAM_SEEK_TO_END ); + ULONG nBytes = pStream->Tell(); + pStream->Seek( STREAM_SEEK_TO_BEGIN ); + SvLockBytesRef xLockBytes = new SvLockBytes( pStream, TRUE ); + uno::Reference< io::XInputStream > xInputStream = new utl::OInputStreamHelper( xLockBytes, nBytes ); + bool bDone = aSignatureHelper.ReadAndVerifySignatue( xInputStream ); + xInputStream->closeInput(); + + aSignatureHelper.EndMission(); + + if ( !bDone ) + ErrorBox( this, WB_OK, String( RTL_CONSTASCII_USTRINGPARAM( "Error in Signature!" ) ) ).Execute(); + else + InfoBox( this, String( RTL_CONSTASCII_USTRINGPARAM( "Signatures verified without any problems!" ) ) ).Execute(); + + return 0; +} + +IMPL_LINK( MyWin, StartVerifySignatureHdl, void*, EMPTYARG ) +{ + QueryBox aQueryBox( this, WB_YES_NO|WB_DEF_YES, String( RTL_CONSTASCII_USTRINGPARAM( "Found Signature - Verify?" ) ) ); + return ( aQueryBox.Execute() == RET_YES ) ? 1 : 0; +} + +IMPL_LINK( MyWin, DigitalSignaturesWithServiceHdl, Button*, EMPTYARG ) +{ + rtl::OUString aDocFileName = maEditDOCFileName.GetText(); + rtl::OUString aSigFileName; + + String aTokenFileName; + if ( !maCryptoCheckBox.IsChecked() ) + aTokenFileName = maEditTokenName.GetText(); + + uno::Reference < embed::XStorage > xStore = ::comphelper::OStorageHelper::GetStorageFromURL( + aDocFileName, embed::ElementModes::READWRITE, comphelper::getProcessServiceFactory() ); + + if ( !bStoreSignatureInStorage ) + { + aSigFileName = aDocFileName; + aSigFileName += String( RTL_CONSTASCII_USTRINGPARAM( ".signature" ) ); + } + + uno::Reference< security::XDocumentDigitalSignatures > xD( + comphelper::getProcessServiceFactory()->createInstance( rtl::OUString( RTL_CONSTASCII_USTRINGPARAM ( "com.sun.star.security.DocumentDigitalSignatures" ) ) ), uno::UNO_QUERY ); + if ( xD.is() ) + xD->SignDocumentContent( xStore, aSigFileName, aTokenFileName ); + + + return 0; +} + +IMPL_LINK( MyWin, DigitalSignaturesWithTokenHdl, Button*, EMPTYARG ) +{ + String aDocFileName = maEditDOCFileName.GetText(); + String aTokenFileName = maEditTokenName.GetText(); + + DigitalSignaturesDialog aSignaturesDialog( this, comphelper::getProcessServiceFactory(), SignatureModeDocumentContent ); + + bool bInit = aSignaturesDialog.Init( aTokenFileName ); + if ( !bInit ) + { + ErrorBox( this, WB_OK, String( RTL_CONSTASCII_USTRINGPARAM( "Error initializing security context!" ) ) ).Execute(); + return 0; + } + + uno::Reference < embed::XStorage > xStore = ::comphelper::OStorageHelper::GetStorageFromURL( + aDocFileName, embed::ElementModes::READWRITE, comphelper::getProcessServiceFactory() ); + + aSignaturesDialog.SetStorage( xStore ); + + if ( !bStoreSignatureInStorage ) + { + rtl::OUString aSigFileName( aDocFileName ); + aSigFileName += String( RTL_CONSTASCII_USTRINGPARAM( ".signature" ) ); + aSignaturesDialog.SetSignatureFileName( aSigFileName ); + } + + aSignaturesDialog.Execute(); + + return 0; +} |