diff options
Diffstat (limited to 'sw/source/filter/basflt/shellio.cxx')
-rw-r--r-- | sw/source/filter/basflt/shellio.cxx | 104 |
1 files changed, 52 insertions, 52 deletions
diff --git a/sw/source/filter/basflt/shellio.cxx b/sw/source/filter/basflt/shellio.cxx index b9348732e380..d42b0642a52c 100644 --- a/sw/source/filter/basflt/shellio.cxx +++ b/sw/source/filter/basflt/shellio.cxx @@ -137,9 +137,9 @@ sal_uLong SwReader::Read( const Reader& rOptions ) RedlineMode_t ePostReadRedlineMode( nsRedlineMode_t::REDLINE_IGNORE ); // Array of FlyFormats - SwFrmFmts aFlyFrmArr; + SwFrameFormats aFlyFrmArr; // only read templates? then ignore multi selection! - bool bFmtsOnly = po->aOpt.IsFmtsOnly(); + bool bFormatsOnly = po->aOpt.IsFormatsOnly(); while( true ) { @@ -159,15 +159,15 @@ sal_uLong SwReader::Read( const Reader& rOptions ) // store for now all Fly's if( pCrsr ) { - std::copy(pDoc->GetSpzFrmFmts()->begin(), - pDoc->GetSpzFrmFmts()->end(), std::back_inserter(aFlyFrmArr)); + std::copy(pDoc->GetSpzFrameFormats()->begin(), + pDoc->GetSpzFrameFormats()->end(), std::back_inserter(aFlyFrmArr)); } - const sal_Int32 nSttCntnt = pPam->GetPoint()->nContent.GetIndex(); + const sal_Int32 nSttContent = pPam->GetPoint()->nContent.GetIndex(); // make sure the End position is correct for all Readers - SwCntntNode* pCNd = pPam->GetCntntNode(); - sal_Int32 nEndCntnt = pCNd ? pCNd->Len() - nSttCntnt : 0; + SwContentNode* pCNd = pPam->GetContentNode(); + sal_Int32 nEndContent = pCNd ? pCNd->Len() - nSttContent : 0; SwNodeIndex aEndPos( pPam->GetPoint()->nNode, 1 ); pDoc->getIDocumentRedlineAccess().SetRedlineMode_intern( eOld ); @@ -182,25 +182,25 @@ sal_uLong SwReader::Read( const Reader& rOptions ) if( !IsError( nError )) // set the End position already { --aEndPos; - pCNd = aEndPos.GetNode().GetCntntNode(); + pCNd = aEndPos.GetNode().GetContentNode(); if( !pCNd && 0 == ( pCNd = SwNodes::GoPrevious( &aEndPos ) )) pCNd = pDoc->GetNodes().GoNext( &aEndPos ); pPam->GetPoint()->nNode = aEndPos; const sal_Int32 nLen = pCNd->Len(); - if( nLen < nEndCntnt ) - nEndCntnt = 0; + if( nLen < nEndContent ) + nEndContent = 0; else - nEndCntnt = nLen - nEndCntnt; - pPam->GetPoint()->nContent.Assign( pCNd, nEndCntnt ); + nEndContent = nLen - nEndContent; + pPam->GetPoint()->nContent.Assign( pCNd, nEndContent ); - const SwStartNode* pTblBoxStart = pCNd->FindTableBoxStartNode(); - if ( pTblBoxStart ) + const SwStartNode* pTableBoxStart = pCNd->FindTableBoxStartNode(); + if ( pTableBoxStart ) { - SwTableBox* pBox = pTblBoxStart->GetTblBox(); + SwTableBox* pBox = pTableBoxStart->GetTableBox(); if ( pBox ) { - pDoc->ChkBoxNumFmt( *pBox, true ); + pDoc->ChkBoxNumFormat( *pBox, true ); } } } @@ -210,9 +210,9 @@ sal_uLong SwReader::Read( const Reader& rOptions ) *pUndoPam->GetMark() = *pPam->GetPoint(); ++pUndoPam->GetPoint()->nNode; SwNode& rNd = pUndoPam->GetNode(); - if( rNd.IsCntntNode() ) + if( rNd.IsContentNode() ) pUndoPam->GetPoint()->nContent.Assign( - static_cast<SwCntntNode*>(&rNd), nSttCntnt ); + static_cast<SwContentNode*>(&rNd), nSttContent ); else pUndoPam->GetPoint()->nContent.Assign( 0, 0 ); @@ -220,14 +220,14 @@ sal_uLong SwReader::Read( const Reader& rOptions ) rNd.FindFooterStartNode(); // search all new Fly's, and store them as individual Undo Objects - for( SwFrmFmts::size_type n = 0; n < pDoc->GetSpzFrmFmts()->size(); ++n ) + for( SwFrameFormats::size_type n = 0; n < pDoc->GetSpzFrameFormats()->size(); ++n ) { - SwFrmFmt* pFrmFmt = (*pDoc->GetSpzFrmFmts())[ n ]; - const SwFmtAnchor& rAnchor = pFrmFmt->GetAnchor(); - if( !aFlyFrmArr.Contains( pFrmFmt) ) + SwFrameFormat* pFrameFormat = (*pDoc->GetSpzFrameFormats())[ n ]; + const SwFormatAnchor& rAnchor = pFrameFormat->GetAnchor(); + if( !aFlyFrmArr.Contains( pFrameFormat) ) { SwPosition const*const pFrameAnchor( - rAnchor.GetCntntAnchor()); + rAnchor.GetContentAnchor()); if ( (FLY_AT_PAGE == rAnchor.GetAnchorId()) || ( pFrameAnchor && ( ( (FLY_AT_PARA == rAnchor.GetAnchorId()) @@ -251,11 +251,11 @@ sal_uLong SwReader::Read( const Reader& rOptions ) { if( bChkHeaderFooter && (FLY_AT_PARA == rAnchor.GetAnchorId()) && - RES_DRAWFRMFMT == pFrmFmt->Which() ) + RES_DRAWFRMFMT == pFrameFormat->Which() ) { // DrawObjects are not allowed in Headers/Footers! - pFrmFmt->DelFrms(); - pDoc->DelFrmFmt( pFrmFmt ); + pFrameFormat->DelFrms(); + pDoc->DelFrameFormat( pFrameFormat ); --n; } else @@ -266,21 +266,21 @@ sal_uLong SwReader::Read( const Reader& rOptions ) // UGLY: temp. enable undo pDoc->GetIDocumentUndoRedo().DoUndo(true); pDoc->GetIDocumentUndoRedo().AppendUndo( - new SwUndoInsLayFmt( pFrmFmt,0,0 ) ); + new SwUndoInsLayFormat( pFrameFormat,0,0 ) ); pDoc->GetIDocumentUndoRedo().DoUndo(false); pDoc->getIDocumentRedlineAccess().SetRedlineMode_intern( nsRedlineMode_t::REDLINE_IGNORE ); } - if( pFrmFmt->HasWriterListeners() ) + if( pFrameFormat->HasWriterListeners() ) { // Draw-Objects create a Frame when being inserted; thus delete them - pFrmFmt->DelFrms(); + pFrameFormat->DelFrms(); } if (FLY_AT_PAGE == rAnchor.GetAnchorId()) { - if( !rAnchor.GetCntntAnchor() ) + if( !rAnchor.GetContentAnchor() ) { - pFrmFmt->MakeFrms(); + pFrameFormat->MakeFrms(); } else if( pCrsr ) { @@ -288,7 +288,7 @@ sal_uLong SwReader::Read( const Reader& rOptions ) } } else - pFrmFmt->MakeFrms(); + pFrameFormat->MakeFrms(); } } } @@ -321,7 +321,7 @@ sal_uLong SwReader::Read( const Reader& rOptions ) break; // only read templates? then ignore multi selection! Bug 68593 - if( bFmtsOnly ) + if( bFormatsOnly ) break; /* @@ -507,7 +507,7 @@ SwDoc* Reader::GetTemplateDoc() // always FALSE pTemplate->GetIDocumentUndoRedo().DoUndo( false ); pTemplate->getIDocumentSettingAccess().set(DocumentSettingId::BROWSE_MODE, bTmplBrowseMode ); - pTemplate->RemoveAllFmtLanguageDependencies(); + pTemplate->RemoveAllFormatLanguageDependencies(); ReadXML->SetOrganizerMode( true ); SfxMedium aMedium( aFileName, StreamMode::NONE ); @@ -534,7 +534,7 @@ bool Reader::SetTemplate( SwDoc& rDoc ) GetTemplateDoc(); if( pTemplate ) { - rDoc.RemoveAllFmtLanguageDependencies(); + rDoc.RemoveAllFormatLanguageDependencies(); rDoc.ReplaceStyles( *pTemplate ); rDoc.getIDocumentFieldsAccess().SetFixFields(false, NULL); bRet = true; @@ -569,7 +569,7 @@ void Reader::MakeHTMLDummyTemplateDoc() pTemplate->acquire(); pTemplate->getIDocumentSettingAccess().set(DocumentSettingId::BROWSE_MODE, bTmplBrowseMode ); pTemplate->getIDocumentDeviceAccess().getPrinter( true ); - pTemplate->RemoveAllFmtLanguageDependencies(); + pTemplate->RemoveAllFormatLanguageDependencies(); aChkDateTime = Date( 1, 1, 2300 ); // year 2300 should be sufficient aTemplateNm = "$$Dummy$$"; } @@ -616,25 +616,25 @@ void Reader::SetFltName( const OUString& ) { } -void Reader::ResetFrmFmtAttrs( SfxItemSet &rFrmSet ) +void Reader::ResetFrameFormatAttrs( SfxItemSet &rFrmSet ) { rFrmSet.Put( SvxLRSpaceItem(RES_LR_SPACE) ); rFrmSet.Put( SvxULSpaceItem(RES_UL_SPACE) ); rFrmSet.Put( SvxBoxItem(RES_BOX) ); } -void Reader::ResetFrmFmts( SwDoc& rDoc ) +void Reader::ResetFrameFormats( SwDoc& rDoc ) { sal_uInt16 const s_ids[3] = { RES_POOLFRM_FRAME, RES_POOLFRM_GRAPHIC, RES_POOLFRM_OLE }; for (size_t i = 0; i < SAL_N_ELEMENTS(s_ids); ++i) { - SwFrmFmt *const pFrmFmt = rDoc.getIDocumentStylePoolAccess().GetFrmFmtFromPool( s_ids[i] ); + SwFrameFormat *const pFrameFormat = rDoc.getIDocumentStylePoolAccess().GetFrameFormatFromPool( s_ids[i] ); - pFrmFmt->ResetFmtAttr( RES_LR_SPACE ); - pFrmFmt->ResetFmtAttr( RES_UL_SPACE ); - pFrmFmt->ResetFmtAttr( RES_BOX ); + pFrameFormat->ResetFormatAttr( RES_LR_SPACE ); + pFrameFormat->ResetFormatAttr( RES_UL_SPACE ); + pFrameFormat->ResetFormatAttr( RES_BOX ); } } @@ -756,13 +756,13 @@ sal_uLong SwWriter::Write( WriterRef& rxWriter, const OUString* pRealFileName ) // search the layout for cells SwSelBoxes aBoxes; - GetTblSel( *pShell, aBoxes ); - const SwTableNode* pTblNd = static_cast<const SwTableNode*>(aBoxes[0]->GetSttNd()->StartOfSectionNode()); + GetTableSel( *pShell, aBoxes ); + const SwTableNode* pTableNd = static_cast<const SwTableNode*>(aBoxes[0]->GetSttNd()->StartOfSectionNode()); SwNodeIndex aIdx( pDoc->GetNodes().GetEndOfExtras(), 2 ); - SwCntntNode *pNd = aIdx.GetNode().GetCntntNode(); + SwContentNode *pNd = aIdx.GetNode().GetContentNode(); OSL_ENSURE( pNd, "Node not found" ); SwPosition aPos( aIdx, SwIndex( pNd ) ); - pTblNd->GetTable().MakeCopy( pDoc, aPos, aBoxes ); + pTableNd->GetTable().MakeCopy( pDoc, aPos, aBoxes ); } if( !bWriteAll && ( pShell || pOutPam )) @@ -832,17 +832,17 @@ sal_uLong SwWriter::Write( WriterRef& rxWriter, const OUString* pRealFileName ) { const SwPageDesc& rPgDsc = pOutDoc->GetPageDesc( 0 ); //const SwPageDesc& rPgDsc = *pOutDoc->GetPageDescFromPool( RES_POOLPAGE_STANDARD ); - const SwFmtFrmSize& rSz = rPgDsc.GetMaster().GetFrmSize(); + const SwFormatFrmSize& rSz = rPgDsc.GetMaster().GetFrmSize(); // Clipboard-Document is always created w/o printer; thus the // default PageDesc is always aug LONG_MAX !! Set then to DIN A4 if( LONG_MAX == rSz.GetHeight() || LONG_MAX == rSz.GetWidth() ) { SwPageDesc aNew( rPgDsc ); - SwFmtFrmSize aNewSz( rSz ); + SwFormatFrmSize aNewSz( rSz ); Size a4(SvxPaperInfo::GetPaperSize( PAPER_A4 )); aNewSz.SetHeight( a4.Width() ); aNewSz.SetWidth( a4.Height() ); - aNew.GetMaster().SetFmtAttr( aNewSz ); + aNew.GetMaster().SetFormatAttr( aNewSz ); pOutDoc->ChgPageDesc( 0, aNew ); } } @@ -923,12 +923,12 @@ bool SetHTMLTemplate( SwDoc & rDoc ) SwNodes& rNds = rDoc.GetNodes(); SwNodeIndex aIdx( rNds.GetEndOfExtras(), 1 ); - SwCntntNode* pCNd = rNds.GoNext( &aIdx ); + SwContentNode* pCNd = rNds.GoNext( &aIdx ); if( pCNd ) { pCNd->SetAttr - ( SwFmtPageDesc(rDoc.getIDocumentStylePoolAccess().GetPageDescFromPool(RES_POOLPAGE_HTML, false) ) ); - pCNd->ChgFmtColl( rDoc.getIDocumentStylePoolAccess().GetTxtCollFromPool( RES_POOLCOLL_TEXT, false )); + ( SwFormatPageDesc(rDoc.getIDocumentStylePoolAccess().GetPageDescFromPool(RES_POOLPAGE_HTML, false) ) ); + pCNd->ChgFormatColl( rDoc.getIDocumentStylePoolAccess().GetTextCollFromPool( RES_POOLCOLL_TEXT, false )); } return bRet; |