diff options
Diffstat (limited to 'sfx2/source/doc/objserv.cxx')
| -rw-r--r-- | sfx2/source/doc/objserv.cxx | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/sfx2/source/doc/objserv.cxx b/sfx2/source/doc/objserv.cxx index e53e7148e561..73d836938183 100644 --- a/sfx2/source/doc/objserv.cxx +++ b/sfx2/source/doc/objserv.cxx @@ -295,7 +295,7 @@ sal_Bool SfxObjectShell::APISaveAs_Impl SfxItemSet* aParams ) { - BOOL bOk = sal_False; + sal_Bool bOk = sal_False; {DBG_CHKTHIS(SfxObjectShell, 0);} @@ -345,7 +345,7 @@ sal_Bool SfxObjectShell::APISaveAs_Impl } // prevent picklist-entry - GetMedium()->SetUpdatePickList( FALSE ); + GetMedium()->SetUpdatePickList( sal_False ); } return bOk; @@ -357,7 +357,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) { {DBG_CHKTHIS(SfxObjectShell, 0);} - USHORT nId = rReq.GetSlot(); + sal_uInt16 nId = rReq.GetSlot(); if( SID_SIGNATURE == nId || SID_MACRO_SIGNATURE == nId ) { @@ -406,7 +406,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - case SID_DOCINFO: { - SFX_REQUEST_ARG(rReq, pDocInfItem, SfxDocumentInfoItem, SID_DOCINFO, FALSE); + SFX_REQUEST_ARG(rReq, pDocInfItem, SfxDocumentInfoItem, SID_DOCINFO, sal_False); if ( pDocInfItem ) { // parameter, e.g. from replayed macro @@ -416,8 +416,8 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) else { // no argument containing DocInfo; check optional arguments - BOOL bReadOnly = IsReadOnly(); - SFX_REQUEST_ARG(rReq, pROItem, SfxBoolItem, SID_DOC_READONLY, FALSE); + sal_Bool bReadOnly = IsReadOnly(); + SFX_REQUEST_ARG(rReq, pROItem, SfxBoolItem, SID_DOC_READONLY, sal_False); if ( pROItem ) // override readonly attribute of document // e.g. if a readonly document is saved elsewhere and user asks for editing DocInfo before @@ -442,7 +442,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) IsUseUserData() ); if ( !GetSlotState( SID_DOCTEMPLATE ) ) // templates not supported - aDocInfoItem.SetTemplate(FALSE); + aDocInfoItem.SetTemplate(sal_False); SfxItemSet aSet(GetPool(), SID_DOCINFO, SID_DOCINFO, SID_DOC_READONLY, SID_DOC_READONLY, SID_EXPLORER_PROPS_START, SID_EXPLORER_PROPS_START, SID_BASEURL, SID_BASEURL, @@ -456,7 +456,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) SfxDocumentInfoDialog *pDlg = CreateDocumentInfoDialog(0, aSet); if ( RET_OK == pDlg->Execute() ) { - SFX_ITEMSET_ARG( pDlg->GetOutputItemSet(), pDocInfoItem, SfxDocumentInfoItem, SID_DOCINFO, FALSE); + SFX_ITEMSET_ARG( pDlg->GetOutputItemSet(), pDocInfoItem, SfxDocumentInfoItem, SID_DOCINFO, sal_False); if ( pDocInfoItem ) { // user has done some changes to DocumentInfo @@ -492,7 +492,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // derived class may decide to abort this if( !QuerySlotExecutable( nId ) ) { - rReq.SetReturnValue( SfxBoolItem( 0, FALSE ) ); + rReq.SetReturnValue( SfxBoolItem( 0, sal_False ) ); return; } @@ -517,7 +517,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) if ( nId == SID_SAVEASDOC ) { // in case of plugin mode the SaveAs operation means SaveTo - SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pViewOnlyItem, SfxBoolItem, SID_VIEWONLY, FALSE ); + SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pViewOnlyItem, SfxBoolItem, SID_VIEWONLY, sal_False ); if ( pViewOnlyItem && pViewOnlyItem->GetValue() ) rReq.AppendItem( SfxBoolItem( SID_SAVETO, sal_True ) ); } @@ -525,7 +525,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // TODO/LATER: do the following GUI related actions in standalown method // ======================================================================================================== // Introduce a status indicator for GUI operation - SFX_REQUEST_ARG( rReq, pStatusIndicatorItem, SfxUnoAnyItem, SID_PROGRESS_STATUSBAR_CONTROL, FALSE ); + SFX_REQUEST_ARG( rReq, pStatusIndicatorItem, SfxUnoAnyItem, SID_PROGRESS_STATUSBAR_CONTROL, sal_False ); if ( !pStatusIndicatorItem ) { // get statusindicator @@ -564,7 +564,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) } // Introduce an interaction handler for GUI operation - SFX_REQUEST_ARG( rReq, pInteractionHandlerItem, SfxUnoAnyItem, SID_INTERACTIONHANDLER, FALSE ); + SFX_REQUEST_ARG( rReq, pInteractionHandlerItem, SfxUnoAnyItem, SID_INTERACTIONHANDLER, sal_False ); if ( !pInteractionHandlerItem ) { uno::Reference< task::XInteractionHandler > xInteract; @@ -599,8 +599,8 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // ======================================================================================================== sal_Bool bPreselectPassword = sal_False; - SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pOldEncryptionDataItem, SfxUnoAnyItem, SID_ENCRYPTIONDATA, FALSE ); - SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pOldPasswordItem, SfxStringItem, SID_PASSWORD, FALSE ); + SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pOldEncryptionDataItem, SfxUnoAnyItem, SID_ENCRYPTIONDATA, sal_False ); + SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pOldPasswordItem, SfxStringItem, SID_PASSWORD, sal_False ); if ( pOldEncryptionDataItem || pOldPasswordItem ) bPreselectPassword = sal_True; @@ -643,7 +643,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) NULL ); rReq.SetArgs( aResultParams ); - SFX_REQUEST_ARG( rReq, pFilterNameItem, SfxStringItem, SID_FILTER_NAME, FALSE ); + SFX_REQUEST_ARG( rReq, pFilterNameItem, SfxStringItem, SID_FILTER_NAME, sal_False ); ::rtl::OUString aFilterName = pFilterNameItem ? ::rtl::OUString( pFilterNameItem->GetValue() ) : ::rtl::OUString(); const SfxFilter* pFilt = GetFactory().GetFilterContainer()->GetFilter4FilterName( aFilterName ); @@ -680,14 +680,14 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // by default versions should be preserved always except in case of an explicit // SaveAs via GUI, so the flag must be reset to guarantee this pImp->bPreserveVersions = sal_True; - ULONG lErr=GetErrorCode(); + sal_uIntPtr lErr=GetErrorCode(); if ( !lErr && nErrorCode ) lErr = nErrorCode; if ( lErr && nErrorCode == ERRCODE_NONE ) { - SFX_REQUEST_ARG( rReq, pWarnItem, SfxBoolItem, SID_FAIL_ON_WARNING, FALSE ); + SFX_REQUEST_ARG( rReq, pWarnItem, SfxBoolItem, SID_FAIL_ON_WARNING, sal_False ); if ( pWarnItem && pWarnItem->GetValue() ) nErrorCode = lErr; } @@ -730,8 +730,8 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) return; } - BOOL bInFrameSet = FALSE; - USHORT nFrames=0; + sal_Bool bInFrameSet = sal_False; + sal_uInt16 nFrames=0; pFrame = SfxViewFrame::GetFirst( this ); while ( pFrame ) { @@ -740,7 +740,7 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // Auf dieses Dokument existiert noch eine Sicht, die // in einem FrameSet liegt; diese darf nat"urlich nicht // geclosed werden - bInFrameSet = TRUE; + bInFrameSet = sal_True; } else nFrames++; @@ -761,8 +761,8 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) } // Parameter auswerten - SFX_REQUEST_ARG(rReq, pSaveItem, SfxBoolItem, SID_CLOSEDOC_SAVE, FALSE); - SFX_REQUEST_ARG(rReq, pNameItem, SfxStringItem, SID_CLOSEDOC_FILENAME, FALSE); + SFX_REQUEST_ARG(rReq, pSaveItem, SfxBoolItem, SID_CLOSEDOC_SAVE, sal_False); + SFX_REQUEST_ARG(rReq, pNameItem, SfxStringItem, SID_CLOSEDOC_FILENAME, sal_False); if ( pSaveItem ) { if ( pSaveItem->GetValue() ) @@ -785,22 +785,22 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) } } else - SetModified(FALSE); + SetModified(sal_False); } // Benutzer bricht ab? if ( !PrepareClose( 2 ) ) { - rReq.SetReturnValue( SfxBoolItem(0, FALSE) ); + rReq.SetReturnValue( SfxBoolItem(0, sal_False) ); rReq.Done(); return; } - SetModified( FALSE ); - ULONG lErr = GetErrorCode(); + SetModified( sal_False ); + sal_uIntPtr lErr = GetErrorCode(); ErrorHandler::HandleError(lErr); - rReq.SetReturnValue( SfxBoolItem(0, TRUE) ); + rReq.SetReturnValue( SfxBoolItem(0, sal_True) ); rReq.Done(); rReq.ReleaseArgs(); // da der Pool in Close zerst"ort wird DoClose(); @@ -833,9 +833,9 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) } } - SFX_REQUEST_ARG(rReq, pRegionItem, SfxStringItem, SID_TEMPLATE_REGIONNAME, FALSE); - SFX_REQUEST_ARG(rReq, pNameItem, SfxStringItem, SID_TEMPLATE_NAME, FALSE); - SFX_REQUEST_ARG(rReq, pRegionNrItem, SfxUInt16Item, SID_TEMPLATE_REGION, FALSE); + SFX_REQUEST_ARG(rReq, pRegionItem, SfxStringItem, SID_TEMPLATE_REGIONNAME, sal_False); + SFX_REQUEST_ARG(rReq, pNameItem, SfxStringItem, SID_TEMPLATE_NAME, sal_False); + SFX_REQUEST_ARG(rReq, pRegionNrItem, SfxUInt16Item, SID_TEMPLATE_REGION, sal_False); if ( (!pRegionItem && !pRegionNrItem ) || !pNameItem ) { DBG_ASSERT( rReq.IsAPI(), "non-API call without Arguments" ); @@ -891,10 +891,10 @@ void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) // Picklisten-Eintrag verhindern if ( rReq.IsAPI() ) - GetMedium()->SetUpdatePickList( FALSE ); + GetMedium()->SetUpdatePickList( sal_False ); else if ( rReq.GetArgs() ) { - SFX_ITEMSET_GET( *rReq.GetArgs(), pPicklistItem, SfxBoolItem, SID_PICKLIST, FALSE ); + SFX_ITEMSET_GET( *rReq.GetArgs(), pPicklistItem, SfxBoolItem, SID_PICKLIST, sal_False ); if ( pPicklistItem ) GetMedium()->SetUpdatePickList( pPicklistItem->GetValue() ); } @@ -910,7 +910,7 @@ void SfxObjectShell::GetState_Impl(SfxItemSet &rSet) DBG_CHKTHIS(SfxObjectShell, 0); SfxWhichIter aIter( rSet ); - for ( USHORT nWhich = aIter.FirstWhich(); nWhich; nWhich = aIter.NextWhich() ) + for ( sal_uInt16 nWhich = aIter.FirstWhich(); nWhich; nWhich = aIter.NextWhich() ) { switch ( nWhich ) { @@ -944,7 +944,7 @@ void SfxObjectShell::GetState_Impl(SfxItemSet &rSet) } case SID_SAVEDOC: { - BOOL bMediumRO = IsReadOnlyMedium(); + sal_Bool bMediumRO = IsReadOnlyMedium(); if ( !bMediumRO && GetMedium() && IsModified() ) rSet.Put(SfxStringItem( nWhich, String(SfxResId(STR_SAVEDOC)))); @@ -1118,7 +1118,7 @@ void SfxObjectShell::ExecProps_Impl(SfxRequest &rReq) void SfxObjectShell::StateProps_Impl(SfxItemSet &rSet) { SfxWhichIter aIter(rSet); - for ( USHORT nSID = aIter.FirstWhich(); nSID; nSID = aIter.NextWhich() ) + for ( sal_uInt16 nSID = aIter.FirstWhich(); nSID; nSID = aIter.NextWhich() ) { switch ( nSID ) { @@ -1200,7 +1200,7 @@ void SfxObjectShell::ExecView_Impl(SfxRequest &rReq) { case SID_ACTIVATE: { - SfxViewFrame *pFrame = SfxViewFrame::GetFirst( this, TRUE ); + SfxViewFrame *pFrame = SfxViewFrame::GetFirst( this, sal_True ); if ( pFrame ) pFrame->GetFrame().Appear(); rReq.SetReturnValue( SfxObjectItem( 0, pFrame ) ); @@ -1219,7 +1219,7 @@ void SfxObjectShell::ExecView_Impl(SfxRequest &rReq) if ( aFileName.Len() ) { SfxStringItem aName( SID_FILE_NAME, aFileName ); - SfxBoolItem aCreateView( SID_OPEN_NEW_VIEW, TRUE ); + SfxBoolItem aCreateView( SID_OPEN_NEW_VIEW, sal_True ); SFX_APP()->GetAppDispatcher_Impl()->Execute( SID_OPENDOC, SFX_CALLMODE_ASYNCHRON, &aName, &aCreateView, 0L); @@ -1384,7 +1384,7 @@ void SfxObjectShell::ImplSign( sal_Bool bScriptingContent ) if ( (bHasSign && QueryBox( NULL, SfxResId( MSG_XMLSEC_QUERY_SAVESIGNEDBEFORESIGN ) ).Execute() == RET_YES) || (!bHasSign && QueryBox( NULL, SfxResId( RID_XMLSEC_QUERY_SAVEBEFORESIGN ) ).Execute() == RET_YES) ) { - USHORT nId = SID_SAVEDOC; + sal_uInt16 nId = SID_SAVEDOC; if ( !GetMedium() || !GetMedium()->GetName().Len() ) nId = SID_SAVEASDOC; SfxRequest aSaveRequest( nId, 0, GetPool() ); @@ -1472,22 +1472,22 @@ void SfxObjectShell::ImplSign( sal_Bool bScriptingContent ) sal_uInt16 SfxObjectShell::GetDocumentSignatureState() { - return ImplGetSignatureState( FALSE ); + return ImplGetSignatureState( sal_False ); } void SfxObjectShell::SignDocumentContent() { - ImplSign( FALSE ); + ImplSign( sal_False ); } sal_uInt16 SfxObjectShell::GetScriptingSignatureState() { - return ImplGetSignatureState( TRUE ); + return ImplGetSignatureState( sal_True ); } void SfxObjectShell::SignScriptingContent() { - ImplSign( TRUE ); + ImplSign( sal_True ); } // static |