diff options
Diffstat (limited to 'setup_native')
| -rw-r--r-- | setup_native/Package_scripts.mk | 3 | ||||
| -rw-r--r-- | setup_native/scripts/javaloader.sh | 565 | ||||
| -rw-r--r-- | setup_native/scripts/update.sh | 212 |
3 files changed, 0 insertions, 780 deletions
diff --git a/setup_native/Package_scripts.mk b/setup_native/Package_scripts.mk index e9447430500e..997f12259b6b 100644 --- a/setup_native/Package_scripts.mk +++ b/setup_native/Package_scripts.mk @@ -11,12 +11,9 @@ $(eval $(call gb_Package_Package,setup_native/scripts,$(SRCDIR)/setup_native/scr $(eval $(call gb_Package_set_outdir,setup_native/scripts,$(OUTDIR))) -$(eval $(call gb_Package_add_file,setup_native/scripts,bin/admin.pl,admin.pl)) $(eval $(call gb_Package_add_file,setup_native/scripts,bin/mac_install.script,mac_install.script)) $(eval $(call gb_Package_add_file,setup_native/scripts,bin/osx_install_languagepack.applescript,osx_install_languagepack.applescript)) $(eval $(call gb_Package_add_file,setup_native/scripts,bin/langpackscript.sh,langpackscript.sh)) -$(eval $(call gb_Package_add_file,setup_native/scripts,bin/javaloader.sh,javaloader.sh)) -$(eval $(call gb_Package_add_file,setup_native/scripts,bin/update,update.sh)) $(eval $(call gb_Package_add_file,setup_native/scripts,bin/downloadscript.sh,downloadscript.sh)) ifeq ($(ENABLE_ONLINE_UPDATE),TRUE) diff --git a/setup_native/scripts/javaloader.sh b/setup_native/scripts/javaloader.sh deleted file mode 100644 index 1b20899e9f4f..000000000000 --- a/setup_native/scripts/javaloader.sh +++ /dev/null @@ -1,565 +0,0 @@ -#!/bin/sh -# -# This file is part of the LibreOffice project. -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. -# -# This file incorporates work covered by the following license notice: -# -# Licensed to the Apache Software Foundation (ASF) under one or more -# contributor license agreements. See the NOTICE file distributed -# with this work for additional information regarding copyright -# ownership. The ASF licenses this file to you under the Apache -# License, Version 2.0 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.apache.org/licenses/LICENSE-2.0 . -# - -jarfilename="JavaSetup.jar" -tempdir=/var/tmp/install_$$ -java_runtime="java" -java_runtime_set="no" -java_runtime_found="no" -java_runtime_sufficient="no" -java_versions_supported="1.4 1.5 1.6" -rpm2cpio_found="no" -rpm_found="no" -is_64bit_arch="no" -arch64string="x86_64" -arch64string2="64-bit" -sunjavahotspot="HotSpot" -errortext="" -errorcode="" - -start_java() -{ - umask 022 - - echo "Using $java_runtime" - echo `$java_runtime -version` - echo "Running installer" - - # looking for environment variables - - home="" - if [ "x" != "x$HOME" ]; then - home=-DHOME=$HOME - fi - - log_module_states="" - if [ "x" != "x$LOG_MODULE_STATES" ]; then - log_module_states=-DLOG_MODULE_STATES=$LOG_MODULE_STATES - fi - - getuid_path="" - if [ "x" != "x$GETUID_PATH" ]; then - getuid_path=-DGETUID_PATH=$GETUID_PATH - fi - - if [ "x" != "x$jrefile" ]; then - jrecopy=-DJRE_FILE=$jrefile - fi - - # run the installer class file - echo $java_runtime $home $log_module_states $getuid_path $jrecopy -jar $jarfilename - $java_runtime $home $log_module_states $getuid_path $jrecopy -jar $jarfilename -} - -cleanup() -{ - if [ "x$tempdir" != "x" -a -d "$tempdir" ]; then - rm -rf $tempdir - fi -} - -do_exit() -{ - exitstring=$errortext - if [ "x" != "x$errorcode" ]; then - exitstring="$exitstring (exit code $errorcode)" - fi - - # simply echo the exitstring or open a xterm - # -> dependent from tty - - if tty ; then - echo $exitstring - else - mkdir $tempdir - - # creating error file - errorfile=$tempdir/error - - cat > $errorfile << EOF -echo "$exitstring" -echo "Press return to continue ..." -read a -EOF - - chmod 755 $errorfile - - # searching for xterm in path - xtermname="xterm" - xtermfound="no"; - for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do - if [ -x "$i/$xtermname" -a ! -d "$i/$xtermname" ]; then - xtermname="$i/$xtermname" - xtermfound="yes" - break - fi - done - - if [ $xtermfound = "no" -a "`uname -s`" = "SunOS" ]; then - if [ -x /usr/openwin/bin/xterm ]; then - xtermname=/usr/openwin/bin/xterm - xtermfound="yes" - fi - fi - - if [ $xtermfound = "yes" ]; then - $xtermname -e $errorfile - fi - fi - - cleanup - - exit $errorcode -} - -set_jre_for_uninstall() -{ - # if "uninstalldata" exists, this is not required - if [ ! -d "uninstalldata" ]; then - packagepath="RPMS" - jrefile=`find $packagepath -type f -name "jre*.rpm" -print` - jrefile=`basename $jrefile` - if [ -z "$jrefile" ]; then - jrefile="notfound" - fi - - # check existence of jre rpm - if [ ! -f $packagepath/$jrefile ]; then - errortext="Error: Java Runtime Environment (JRE) not found in directory: $packagepath" - errorcode="4" - do_exit - fi - fi -} - -install_linux_rpm() -{ - # Linux requires usage of rpm2cpio to install JRE with user privileges - # 1. --relocate /usr/java=/var/tmp does not work, because not all files are - # relocatable. Some are always installed into /etc - # 2. --root only works with root privileges. With user privileges only the - # database is shifted, but not the files. - - # On Linux currently rpm2cpio is required (and rpm anyhow) - - find_rpm2cpio() - - if [ ! "$rpm2cpio_found" = "yes" ]; then - errortext="Error: Did not find rpm2cpio. rpm2cpio is currently required for installations on Linux." - errorcode="11" - do_exit - fi - - find_rpm() - - if [ ! "$rpm_found" = "yes" ]; then - errortext="Error: Did not find rpm. rpm is currently required for installations on Linux." - errorcode="12" - do_exit - fi - - # jrefile=jre-6-linux-i586.rpm - # javahome=usr/java/jre1.6.0 - - packagepath="RPMS" - - # using "uninstalldata" for uninstallation - if [ -d "uninstalldata" ]; then - packagepath="uninstalldata/jre" - fi - - jrefile=`find $packagepath -type f -name "jre*.rpm" -print` - jrefile=`basename $jrefile` - if [ -z "$jrefile" ]; then - jrefile="notfound" - fi - - # check existence of jre rpm - if [ ! -f $packagepath/$jrefile ]; then - errortext="Error: Java Runtime Environment (JRE) not found in directory: $packagepath" - errorcode="4" - do_exit - fi - - PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar" - - mkdir $tempdir - - trap 'rm -rf $tempdir; exit 1' HUP INT QUIT TERM - - tempjrefile=$tempdir/$jrefile - cp $packagepath/$jrefile $tempjrefile - - if [ ! -f "$tempjrefile" ]; then - errortext="Error: Failed to copy Java Runtime Environment (JRE) temporarily." - errorcode="5" - do_exit - fi - - # check if copy was successful - if [ -x /usr/bin/sum ]; then - - echo "Checksumming..." - - sumA=`/usr/bin/sum $packagepath/$jrefile` - index=1 - for s in $sumA; do - case $index in - 1) - sumA1=$s; - index=2; - ;; - 2) - sumA2=$s; - index=3; - ;; - esac - done - - sumB=`/usr/bin/sum $tempjrefile` - index=1 - for s in $sumB; do - case $index in - 1) - sumB1=$s; - index=2; - ;; - 2) - sumB2=$s; - index=3; - ;; - esac - done - - # echo "Checksum 1: A1: $sumA1 B1: $sumB1" - # echo "Checksum 2: A2: $sumA2 B2: $sumB2" - - if [ $sumA1 -ne $sumB1 ] || [ $sumA2 -ne $sumB2 ]; then - errortext="Error: Failed to install Java Runtime Environment (JRE) temporarily." - errorcode="6" - do_exit - fi - else - echo "Can't find /usr/bin/sum to do checksum. Continuing anyway." - fi - - # start to install jre - echo "Extracting ..." - olddir=`pwd` - cd "$tempdir" - rpm2cpio $tempjrefile | cpio -i --make-directories - rm -f $tempjrefile # we do not need it anymore, so conserve discspace - - javahomeparent=usr/java - javahomedir=`find $javahomeparent -maxdepth 1 -type d -name "jre*" -print` - javahomedir=`basename $javahomedir` - if [ -z "$javahomedir" ]; then - javahomedir="notfound" - fi - - javahome=$javahomeparent/$javahomedir - - if [ ! -d ${javahome} ]; then - errortext="Error: Failed to extract the Java Runtime Environment (JRE) files." - errorcode="7" - do_exit - fi - - UNPACK_EXE=$javahome/bin/unpack200 - if [ -f $UNPACK_EXE ]; then - chmod +x $UNPACK_EXE - packerror="" - for i in $PACKED_JARS; do - if [ -f $javahome/`dirname $i`/`basename $i .jar`.pack ]; then - # printf "Creating %s\n" $javahome/$i - $UNPACK_EXE $javahome/`dirname $i`/`basename $i .jar`.pack $javahome/$i - if [ $? -ne 0 ] || [ ! -f $javahome/$i ]; then - printf "ERROR: Failed to unpack JAR file:\n\n\t%s\n\n" $i - printf "Installation failed. Please refer to the Troubleshooting Section of\n" - printf "the Installation Instructions on the download page.\n" - packerror="1" - break - fi - - # remove the old pack file - rm -f $javahome/`dirname $i`/`basename $i .jar`.pack - fi - done - if [ "$packerror" = "1" ]; then - if [ -d $javahome ]; then - /bin/rm -rf $javahome - fi - - errortext="Error: Failed to extract the Java Runtime Environment (JRE) files." - errorcode="8" - do_exit - fi - fi - - PREFS_LOCATION="`echo \"${javahome}\" | sed -e 's/^jdk.*/&\/jre/'`/.systemPrefs" - - if [ ! -d "${PREFS_LOCATION}" ]; then - mkdir -m 755 "${PREFS_LOCATION}" - fi - if [ ! -f "${PREFS_LOCATION}/.system.lock" ]; then - touch "${PREFS_LOCATION}/.system.lock" - chmod 644 "${PREFS_LOCATION}/.system.lock" - fi - if [ ! -f "${PREFS_LOCATION}/.systemRootModFile" ]; then - touch "${PREFS_LOCATION}/.systemRootModFile" - chmod 644 "${PREFS_LOCATION}/.systemRootModFile" - fi - - if [ x$ARCH = "x32" ] && [ -f "$javahome/bin/java" ]; then - "$javahome/bin/java" -client -Xshare:dump > /dev/null 2>&1 - fi - - java_runtime=$tempdir/$javahome/bin/java - - # Make symbolic links to all TrueType font files installed in the system - # to avoid garbles for Japanese, Korean or Chinese - language=`printenv LANG | cut -c 1-3` - if [ x$language = "xja_" -o x$language = "xko_" -o x$language = "xzh_" ]; then - font_fallback_dir=$javahome/lib/fonts/fallback - echo "Making symbolic links to TrueType font files into $font_fallback_dir." - mkdir -p $font_fallback_dir - ttf_files=`locate "*.ttf" | xargs` - if [ x$ttf_files = "x" ]; then - ttf_files=`find /usr/share/fonts/ -name "*ttf"` - if [ x$ttf_files = "x" ]; then - ttf_files=`find /usr/X11R6/lib/ -name "*ttf"` - fi - fi - ln -s $ttf_files $font_fallback_dir - fi - - echo "Done." - cd "$olddir" -} - -find_rpm2cpio() -{ - # searching for rpm2cpio in path - for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do - if [ -x "$i/rpm2cpio" -a ! -d "$i/$rpm2cpio" ]; then - rpm2cpio_found="yes" - break - fi - done -} - -find_rpm() -{ - # searching for rpm in path - for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do - if [ -x "$i/rpm" -a ! -d "$i/$rpm" ]; then - rpm_found="yes" - break - fi - done -} - -check_architecture() -{ - # Check, if system and installation set fit together (x86 and sparc). - # If not, throw a warning. - # Architecture of the installation set is saved in file "installdata/xpd/setup.xpd" - # <architecture>sparc</architecture> or <architecture>i386</architecture> - # Architecture of system is determined with "uname -p" - - setupxpdfile="installdata/xpd/setup.xpd" - - if [ -f $setupxpdfile ]; then - platform=`uname -p` # valid values are "sparc" or "i386" - searchstring="<architecture>$platform</architecture>" - match=`cat $setupxpdfile | grep $searchstring` - - if [ -z "$match" ]; then - # architecture does not fit, warning required - if [ "$platform" = "sparc" ]; then - echo "Warning: This is an attempt to install Solaris x86 packages on Solaris Sparc." - else - echo "Warning: This is an attempt to install Solaris Sparc packages on Solaris x86." - fi - fi - fi -} - -find_jre_in_path() -{ - # searching for java runtime in path - for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do - if [ -x "$i/$java_runtime" -a ! -d "$i/$java_runtime" ]; then - java_runtime="$i/$java_runtime" - java_runtime_found="yes" - break - fi - done -} - -check_jre_version() -{ - # check version of an installed JRE - javaoutput=`$java_runtime -version 2>&1 | tail ${tail_args} -1` - hotspot=`echo $javaoutput | grep $sunjavahotspot` - if [ ! -z "$hotspot" ]; then - for i in $java_versions_supported; do - versionmatch=`echo $javaoutput | grep $i` - if [ ! -z "$versionmatch" ]; then - java_runtime_sufficient="yes" - break - fi - done - - # check new version format, where version number is not part of line 3 (1.6) - if [ ! "$java_runtime_sufficient" = "yes" ]; then - javaoutput=`$java_runtime -version 2>&1 | head ${tail_args} -3` - for i in $java_versions_supported; do - versionmatch=`echo $javaoutput | grep $i` - if [ ! -z "$versionmatch" ]; then - java_runtime_sufficient="yes" - break - fi - done - fi - fi -} - -check_linux_jre_version() -{ - # check version of an installed JRE - javaoutput=`$java_runtime -version 2>&1 | head -1` - - for i in $java_versions_supported; do - versionmatch=`echo $javaoutput | grep $i` - if [ ! -z "$versionmatch" ]; then - java_runtime_sufficient="yes" - break - fi - done -} - -check_64bit_architecture() -{ - # check system architecture using "uname -m" - # unameoutput=`uname -m 2>&1` - # x64str=`echo $unameoutput | grep $arch64string` - - # check system architecture using "file /usr/bin/file" - fileoutput=`file /usr/bin/file 2>&1` - x64str=`echo $fileoutput | grep $arch64string2` - - if [ ! -z "$x64str" ]; then - is_64bit_arch="yes" - echo "64-bit Linux" - fi -} - -# the user might want to specify java runtime on the commandline -USAGE="Usage: $0 [ -j <java_runtime> ]" -while getopts hj: opt; do - echo "Parameter: $opt" - case $opt in - j) java_runtime_set="yes"; - java_runtime="${OPTARG}" - if [ ! -f "$java_runtime" ]; then - errortext="Error: Invalid java runtime $java_runtime, file does not exist." - errorcode="2" - do_exit - fi - if [ ! -x "$java_runtime" ]; then - errortext="Error: Invalid java runtime $java_runtime, not an executable file." - errorcode="3" - do_exit - fi - java_runtime_found="yes"; - ;; - h) echo ${USAGE} - errortext="" - errorcode="" - do_exit - ;; - \?) echo ${USAGE} - errortext="" - errorcode="" - do_exit - ;; - esac -done - -# changing into setup directory -cd "`dirname "$0"`" - -# prepare jre, if not set on command line -if [ "$java_runtime_set" != "yes" ]; then - platform=`uname -s` - if [ "`uname -s`" = "Linux" ]; then - check_64bit_architecture - if [ "$is_64bit_arch" = "no" ]; then - install_linux_rpm - else - find_jre_in_path - if [ "$java_runtime_found" = "yes" ]; then - check_linux_jre_version - if [ ! "$java_runtime_sufficient" = "yes" ]; then - errortext="Error: Did not find a valid Java Runtime Environment (JRE). Required JRE versions: $java_versions_supported" - errorcode="14" - do_exit - fi - else - errortext="Error: Did not find an installed Java Runtime Environment (JRE)." - errorcode="15" - do_exit - fi - fi - elif [ "`uname -s`" = "SunOS" ]; then - check_architecture - find_jre_in_path - if [ "$java_runtime_found" = "yes" ]; then - check_jre_version - if [ ! "$java_runtime_sufficient" = "yes" ]; then - errortext="Error: Did not find a valid Java Runtime Environment (JRE). Required JRE versions: $java_versions_supported" - errorcode="9" - do_exit - fi - else - errortext="Error: Did not find an installed Java Runtime Environment (JRE)." - errorcode="10" - do_exit - fi - else - errortext="Error: Platform $platform not supported for Java Runtime Environment (JRE) installation." - errorcode="1" - do_exit - fi -fi - -# jre for Linux is also required, if java runtime is set (for uninstallation mode) -if [ "$java_runtime_set" = "yes" ]; then - platform=`uname -s` - if [ "`uname -s`" = "Linux" ]; then - set_jre_for_uninstall - fi -fi - -start_java - -cleanup - -exit 0 diff --git a/setup_native/scripts/update.sh b/setup_native/scripts/update.sh deleted file mode 100644 index aac202fe6781..000000000000 --- a/setup_native/scripts/update.sh +++ /dev/null @@ -1,212 +0,0 @@ -#!/bin/sh -# -# This file is part of the LibreOffice project. -# -# This Source Code Form is subject to the terms of the Mozilla Public -# License, v. 2.0. If a copy of the MPL was not distributed with this -# file, You can obtain one at http://mozilla.org/MPL/2.0/. -# -# This file incorporates work covered by the following license notice: -# -# Licensed to the Apache Software Foundation (ASF) under one or more -# contributor license agreements. See the NOTICE file distributed -# with this work for additional information regarding copyright -# ownership. The ASF licenses this file to you under the Apache -# License, Version 2.0 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.apache.org/licenses/LICENSE-2.0 . -# - -GNOMEXCMDS="/usr/bin/gksu" -GNOMECMDS="/usr/bin/gnome-terminal /opt/gnome/bin/gnome-terminal" -KDEXCMDS="/usr/bin/kdesu /opt/kde/bin/kdesu /opt/kde?/bin/kdesu" -KDECMDS="/usr/bin/konsole /opt/kde/bin/konsole /opt/kde?/bin/konsole" -MISCCMDS="/usr/bin/x-terminal-emulator /usr/X11/bin/xterm /usr/openwin/bin/xterm" - -TITLE='${PRODUCTNAME} update' - -# -# Usage -# - -Usage () { - if [ "`basename $0`" = "update" ]; then - echo "Usage: `basename $0` [<path to ${PRODUCTNAME} installation>]" - fi - echo - exit 2 -} - -make_tempfile() { - - # Always prefer mktemp when available - if [ -x "$MKTEMP" ]; then - "$MKTEMP" "/tmp/$1.XXXXXX" - else - TMPCMD="/tmp/$1.$$" - touch $TMPCMD - echo $TMPCMD - fi - -} - -# -# make_command_file - generate a command file to pass to xterm & co -# -run_in_terminal () { - - TMPCMD=`make_tempfile 'OpenOffice.org-Online-Update'` - - cat >> $TMPCMD - - cat >> $TMPCMD << \EOF -if [ $? -eq 0 -a ! -z "$DISPLAY" ]; then - echo - echo "Press <Enter> to close this window" - read DUMMY -fi -EOF - - cat >> $TMPCMD << EOF -rm -f $TMPCMD -EOF - - chmod a+x $TMPCMD - exec "$@" -e $TMPCMD -} - -# -# run the command line passed as positional parameters either via -# gksu/kdesu or via su command in a terminal emulator. -# -elevate() { - - TITLEOPT="" - GEOMOPT="" - case `basename $XTERM` in - "xterm") - TITLEOPT="-title" - GEOMOPT="-geometry " - ;; - "gnome-terminal" | "konsole" | "x-terminal-emulator") - TITLEOPT="--title" - GEOMOPT="--geometry=" - ;; - esac - - case `basename $SU` in - "kdesu" ) - # --caption - SUOPT="-t" - ;; - "gksu" ) - # --title - SUOPT="" - ;; - "su" ) - SUOPT="- root -c" - ;; - esac - - ( echo "echo The application \"$@\" will update your ${PRODUCTNAME} installation." - echo "echo" - echo "$SU" "$SUOPT" "$@" - ) | run_in_terminal "$XTERM" "$TITLEOPT" "$TITLE" ${GEOMOPT}+300+300 -} - - -update_pkg() { - ADMINFILE=`make_tempfile 'LibreOffice-Online-Update-admin'` - -cat >> $ADMINFILE << EOF -action=nocheck -conflict=nocheck -setuid=nocheck -idepend=nocheck -rdepend=nocheck -mail= -EOF - - PKGLIST="" - for i in `cd $1; ls -d *`; do - pkginfo -q $i && PKGLIST="$PKGLIST $i" - done - - pkgrm -n -a $ADMINFILE $PKGLIST - pkgadd -n -a $ADMINFILE -d $1 $PKGLIST - - rm -f $ADMINFILE -} - -# -# main -# - -CMD="`basename $0`" -BASEDIR="`dirname $0`" -ABSBASEDIR="`cd $BASEDIR; pwd`" - -if [ -z "$DISPLAY" ]; then - SU="su" - XTERM="" -else - # define search order depending on the desktop in use .. - if [ "`uname -s`" = "SunOS" ]; then - XPROP=/usr/openwin/bin/xprop - GREP=/usr/xpg4/bin/grep - MKTEMP=/usr/bin/mktemp - else - if [ -x /usr/X11/bin/xprop ]; then - XPROP=/usr/X11/bin/xprop - else - XPROP=/usr/bin/xprop - fi - GREP=grep - MKTEMP=/bin/mktemp - fi - - # use desktop specific tools where possible, but prefer X11 su over terminal emulators - if $XPROP -root | $GREP -q '^KWIN_RUNNING'; then - SULIST="$KDEXCMDS $GNOMEXCMDS" - XTERMLIST="$KDECMDS $MISCCMDS" - else - SULIST="$GNOMEXCMDS $KDEXCMDS" - XTERMLIST="$GNOMECMDS $MISCCMDS" - fi - - # search for the first available terminal emulator - for i in $XTERMLIST; do - if [ -x $i ]; then - XTERM=$i - break - fi - done - - # we prefer gksu or kdesu if available - SU="su" - for i in $SULIST; do - if [ -x $i ]; then - SU=$i - break - fi - done -fi - -if [ "$CMD" = "update" ]; then - if [ $# -gt 0 ]; then - [ -d $1 -a $# -eq 1 ] || Usage - elevate "$ABSBASEDIR/$CMD" - else - if [ -d "$BASEDIR/RPMS" ]; then - # do not use --hash as the control sequence to edit the current line does not work - # in our setup (at least not with kdesu) - rpm -v --freshen `find "$BASEDIR"/RPMS -name '*.rpm'` - elif [ -d "$BASEDIR/DEBS" ]; then - dpkg --install --selected-only --recursive "$BASEDIR"/DEBS - elif [ -d "$BASEDIR/packages" ]; then - update_pkg "$BASEDIR/packages" - fi - fi -else - Usage -fi |