summaryrefslogtreecommitdiff
path: root/setup_native/scripts
diff options
context:
space:
mode:
Diffstat (limited to 'setup_native/scripts')
-rw-r--r--setup_native/scripts/javaloader.sh565
-rw-r--r--setup_native/scripts/update.sh212
2 files changed, 0 insertions, 777 deletions
diff --git a/setup_native/scripts/javaloader.sh b/setup_native/scripts/javaloader.sh
deleted file mode 100644
index 1b20899e9f4f..000000000000
--- a/setup_native/scripts/javaloader.sh
+++ /dev/null
@@ -1,565 +0,0 @@
-#!/bin/sh
-#
-# This file is part of the LibreOffice project.
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-#
-# This file incorporates work covered by the following license notice:
-#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements. See the NOTICE file distributed
-# with this work for additional information regarding copyright
-# ownership. The ASF licenses this file to you under the Apache
-# License, Version 2.0 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.apache.org/licenses/LICENSE-2.0 .
-#
-
-jarfilename="JavaSetup.jar"
-tempdir=/var/tmp/install_$$
-java_runtime="java"
-java_runtime_set="no"
-java_runtime_found="no"
-java_runtime_sufficient="no"
-java_versions_supported="1.4 1.5 1.6"
-rpm2cpio_found="no"
-rpm_found="no"
-is_64bit_arch="no"
-arch64string="x86_64"
-arch64string2="64-bit"
-sunjavahotspot="HotSpot"
-errortext=""
-errorcode=""
-
-start_java()
-{
- umask 022
-
- echo "Using $java_runtime"
- echo `$java_runtime -version`
- echo "Running installer"
-
- # looking for environment variables
-
- home=""
- if [ "x" != "x$HOME" ]; then
- home=-DHOME=$HOME
- fi
-
- log_module_states=""
- if [ "x" != "x$LOG_MODULE_STATES" ]; then
- log_module_states=-DLOG_MODULE_STATES=$LOG_MODULE_STATES
- fi
-
- getuid_path=""
- if [ "x" != "x$GETUID_PATH" ]; then
- getuid_path=-DGETUID_PATH=$GETUID_PATH
- fi
-
- if [ "x" != "x$jrefile" ]; then
- jrecopy=-DJRE_FILE=$jrefile
- fi
-
- # run the installer class file
- echo $java_runtime $home $log_module_states $getuid_path $jrecopy -jar $jarfilename
- $java_runtime $home $log_module_states $getuid_path $jrecopy -jar $jarfilename
-}
-
-cleanup()
-{
- if [ "x$tempdir" != "x" -a -d "$tempdir" ]; then
- rm -rf $tempdir
- fi
-}
-
-do_exit()
-{
- exitstring=$errortext
- if [ "x" != "x$errorcode" ]; then
- exitstring="$exitstring (exit code $errorcode)"
- fi
-
- # simply echo the exitstring or open a xterm
- # -> dependent from tty
-
- if tty ; then
- echo $exitstring
- else
- mkdir $tempdir
-
- # creating error file
- errorfile=$tempdir/error
-
- cat > $errorfile << EOF
-echo "$exitstring"
-echo "Press return to continue ..."
-read a
-EOF
-
- chmod 755 $errorfile
-
- # searching for xterm in path
- xtermname="xterm"
- xtermfound="no";
- for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do
- if [ -x "$i/$xtermname" -a ! -d "$i/$xtermname" ]; then
- xtermname="$i/$xtermname"
- xtermfound="yes"
- break
- fi
- done
-
- if [ $xtermfound = "no" -a "`uname -s`" = "SunOS" ]; then
- if [ -x /usr/openwin/bin/xterm ]; then
- xtermname=/usr/openwin/bin/xterm
- xtermfound="yes"
- fi
- fi
-
- if [ $xtermfound = "yes" ]; then
- $xtermname -e $errorfile
- fi
- fi
-
- cleanup
-
- exit $errorcode
-}
-
-set_jre_for_uninstall()
-{
- # if "uninstalldata" exists, this is not required
- if [ ! -d "uninstalldata" ]; then
- packagepath="RPMS"
- jrefile=`find $packagepath -type f -name "jre*.rpm" -print`
- jrefile=`basename $jrefile`
- if [ -z "$jrefile" ]; then
- jrefile="notfound"
- fi
-
- # check existence of jre rpm
- if [ ! -f $packagepath/$jrefile ]; then
- errortext="Error: Java Runtime Environment (JRE) not found in directory: $packagepath"
- errorcode="4"
- do_exit
- fi
- fi
-}
-
-install_linux_rpm()
-{
- # Linux requires usage of rpm2cpio to install JRE with user privileges
- # 1. --relocate /usr/java=/var/tmp does not work, because not all files are
- # relocatable. Some are always installed into /etc
- # 2. --root only works with root privileges. With user privileges only the
- # database is shifted, but not the files.
-
- # On Linux currently rpm2cpio is required (and rpm anyhow)
-
- find_rpm2cpio()
-
- if [ ! "$rpm2cpio_found" = "yes" ]; then
- errortext="Error: Did not find rpm2cpio. rpm2cpio is currently required for installations on Linux."
- errorcode="11"
- do_exit
- fi
-
- find_rpm()
-
- if [ ! "$rpm_found" = "yes" ]; then
- errortext="Error: Did not find rpm. rpm is currently required for installations on Linux."
- errorcode="12"
- do_exit
- fi
-
- # jrefile=jre-6-linux-i586.rpm
- # javahome=usr/java/jre1.6.0
-
- packagepath="RPMS"
-
- # using "uninstalldata" for uninstallation
- if [ -d "uninstalldata" ]; then
- packagepath="uninstalldata/jre"
- fi
-
- jrefile=`find $packagepath -type f -name "jre*.rpm" -print`
- jrefile=`basename $jrefile`
- if [ -z "$jrefile" ]; then
- jrefile="notfound"
- fi
-
- # check existence of jre rpm
- if [ ! -f $packagepath/$jrefile ]; then
- errortext="Error: Java Runtime Environment (JRE) not found in directory: $packagepath"
- errorcode="4"
- do_exit
- fi
-
- PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar"
-
- mkdir $tempdir
-
- trap 'rm -rf $tempdir; exit 1' HUP INT QUIT TERM
-
- tempjrefile=$tempdir/$jrefile
- cp $packagepath/$jrefile $tempjrefile
-
- if [ ! -f "$tempjrefile" ]; then
- errortext="Error: Failed to copy Java Runtime Environment (JRE) temporarily."
- errorcode="5"
- do_exit
- fi
-
- # check if copy was successful
- if [ -x /usr/bin/sum ]; then
-
- echo "Checksumming..."
-
- sumA=`/usr/bin/sum $packagepath/$jrefile`
- index=1
- for s in $sumA; do
- case $index in
- 1)
- sumA1=$s;
- index=2;
- ;;
- 2)
- sumA2=$s;
- index=3;
- ;;
- esac
- done
-
- sumB=`/usr/bin/sum $tempjrefile`
- index=1
- for s in $sumB; do
- case $index in
- 1)
- sumB1=$s;
- index=2;
- ;;
- 2)
- sumB2=$s;
- index=3;
- ;;
- esac
- done
-
- # echo "Checksum 1: A1: $sumA1 B1: $sumB1"
- # echo "Checksum 2: A2: $sumA2 B2: $sumB2"
-
- if [ $sumA1 -ne $sumB1 ] || [ $sumA2 -ne $sumB2 ]; then
- errortext="Error: Failed to install Java Runtime Environment (JRE) temporarily."
- errorcode="6"
- do_exit
- fi
- else
- echo "Can't find /usr/bin/sum to do checksum. Continuing anyway."
- fi
-
- # start to install jre
- echo "Extracting ..."
- olddir=`pwd`
- cd "$tempdir"
- rpm2cpio $tempjrefile | cpio -i --make-directories
- rm -f $tempjrefile # we do not need it anymore, so conserve discspace
-
- javahomeparent=usr/java
- javahomedir=`find $javahomeparent -maxdepth 1 -type d -name "jre*" -print`
- javahomedir=`basename $javahomedir`
- if [ -z "$javahomedir" ]; then
- javahomedir="notfound"
- fi
-
- javahome=$javahomeparent/$javahomedir
-
- if [ ! -d ${javahome} ]; then
- errortext="Error: Failed to extract the Java Runtime Environment (JRE) files."
- errorcode="7"
- do_exit
- fi
-
- UNPACK_EXE=$javahome/bin/unpack200
- if [ -f $UNPACK_EXE ]; then
- chmod +x $UNPACK_EXE
- packerror=""
- for i in $PACKED_JARS; do
- if [ -f $javahome/`dirname $i`/`basename $i .jar`.pack ]; then
- # printf "Creating %s\n" $javahome/$i
- $UNPACK_EXE $javahome/`dirname $i`/`basename $i .jar`.pack $javahome/$i
- if [ $? -ne 0 ] || [ ! -f $javahome/$i ]; then
- printf "ERROR: Failed to unpack JAR file:\n\n\t%s\n\n" $i
- printf "Installation failed. Please refer to the Troubleshooting Section of\n"
- printf "the Installation Instructions on the download page.\n"
- packerror="1"
- break
- fi
-
- # remove the old pack file
- rm -f $javahome/`dirname $i`/`basename $i .jar`.pack
- fi
- done
- if [ "$packerror" = "1" ]; then
- if [ -d $javahome ]; then
- /bin/rm -rf $javahome
- fi
-
- errortext="Error: Failed to extract the Java Runtime Environment (JRE) files."
- errorcode="8"
- do_exit
- fi
- fi
-
- PREFS_LOCATION="`echo \"${javahome}\" | sed -e 's/^jdk.*/&\/jre/'`/.systemPrefs"
-
- if [ ! -d "${PREFS_LOCATION}" ]; then
- mkdir -m 755 "${PREFS_LOCATION}"
- fi
- if [ ! -f "${PREFS_LOCATION}/.system.lock" ]; then
- touch "${PREFS_LOCATION}/.system.lock"
- chmod 644 "${PREFS_LOCATION}/.system.lock"
- fi
- if [ ! -f "${PREFS_LOCATION}/.systemRootModFile" ]; then
- touch "${PREFS_LOCATION}/.systemRootModFile"
- chmod 644 "${PREFS_LOCATION}/.systemRootModFile"
- fi
-
- if [ x$ARCH = "x32" ] && [ -f "$javahome/bin/java" ]; then
- "$javahome/bin/java" -client -Xshare:dump > /dev/null 2>&1
- fi
-
- java_runtime=$tempdir/$javahome/bin/java
-
- # Make symbolic links to all TrueType font files installed in the system
- # to avoid garbles for Japanese, Korean or Chinese
- language=`printenv LANG | cut -c 1-3`
- if [ x$language = "xja_" -o x$language = "xko_" -o x$language = "xzh_" ]; then
- font_fallback_dir=$javahome/lib/fonts/fallback
- echo "Making symbolic links to TrueType font files into $font_fallback_dir."
- mkdir -p $font_fallback_dir
- ttf_files=`locate "*.ttf" | xargs`
- if [ x$ttf_files = "x" ]; then
- ttf_files=`find /usr/share/fonts/ -name "*ttf"`
- if [ x$ttf_files = "x" ]; then
- ttf_files=`find /usr/X11R6/lib/ -name "*ttf"`
- fi
- fi
- ln -s $ttf_files $font_fallback_dir
- fi
-
- echo "Done."
- cd "$olddir"
-}
-
-find_rpm2cpio()
-{
- # searching for rpm2cpio in path
- for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do
- if [ -x "$i/rpm2cpio" -a ! -d "$i/$rpm2cpio" ]; then
- rpm2cpio_found="yes"
- break
- fi
- done
-}
-
-find_rpm()
-{
- # searching for rpm in path
- for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do
- if [ -x "$i/rpm" -a ! -d "$i/$rpm" ]; then
- rpm_found="yes"
- break
- fi
- done
-}
-
-check_architecture()
-{
- # Check, if system and installation set fit together (x86 and sparc).
- # If not, throw a warning.
- # Architecture of the installation set is saved in file "installdata/xpd/setup.xpd"
- # <architecture>sparc</architecture> or <architecture>i386</architecture>
- # Architecture of system is determined with "uname -p"
-
- setupxpdfile="installdata/xpd/setup.xpd"
-
- if [ -f $setupxpdfile ]; then
- platform=`uname -p` # valid values are "sparc" or "i386"
- searchstring="<architecture>$platform</architecture>"
- match=`cat $setupxpdfile | grep $searchstring`
-
- if [ -z "$match" ]; then
- # architecture does not fit, warning required
- if [ "$platform" = "sparc" ]; then
- echo "Warning: This is an attempt to install Solaris x86 packages on Solaris Sparc."
- else
- echo "Warning: This is an attempt to install Solaris Sparc packages on Solaris x86."
- fi
- fi
- fi
-}
-
-find_jre_in_path()
-{
- # searching for java runtime in path
- for i in `echo $PATH | sed -e 's/^:/.:/g' -e 's/:$/:./g' -e 's/::/:.:/g' -e 's/:/ /g'`; do
- if [ -x "$i/$java_runtime" -a ! -d "$i/$java_runtime" ]; then
- java_runtime="$i/$java_runtime"
- java_runtime_found="yes"
- break
- fi
- done
-}
-
-check_jre_version()
-{
- # check version of an installed JRE
- javaoutput=`$java_runtime -version 2>&1 | tail ${tail_args} -1`
- hotspot=`echo $javaoutput | grep $sunjavahotspot`
- if [ ! -z "$hotspot" ]; then
- for i in $java_versions_supported; do
- versionmatch=`echo $javaoutput | grep $i`
- if [ ! -z "$versionmatch" ]; then
- java_runtime_sufficient="yes"
- break
- fi
- done
-
- # check new version format, where version number is not part of line 3 (1.6)
- if [ ! "$java_runtime_sufficient" = "yes" ]; then
- javaoutput=`$java_runtime -version 2>&1 | head ${tail_args} -3`
- for i in $java_versions_supported; do
- versionmatch=`echo $javaoutput | grep $i`
- if [ ! -z "$versionmatch" ]; then
- java_runtime_sufficient="yes"
- break
- fi
- done
- fi
- fi
-}
-
-check_linux_jre_version()
-{
- # check version of an installed JRE
- javaoutput=`$java_runtime -version 2>&1 | head -1`
-
- for i in $java_versions_supported; do
- versionmatch=`echo $javaoutput | grep $i`
- if [ ! -z "$versionmatch" ]; then
- java_runtime_sufficient="yes"
- break
- fi
- done
-}
-
-check_64bit_architecture()
-{
- # check system architecture using "uname -m"
- # unameoutput=`uname -m 2>&1`
- # x64str=`echo $unameoutput | grep $arch64string`
-
- # check system architecture using "file /usr/bin/file"
- fileoutput=`file /usr/bin/file 2>&1`
- x64str=`echo $fileoutput | grep $arch64string2`
-
- if [ ! -z "$x64str" ]; then
- is_64bit_arch="yes"
- echo "64-bit Linux"
- fi
-}
-
-# the user might want to specify java runtime on the commandline
-USAGE="Usage: $0 [ -j <java_runtime> ]"
-while getopts hj: opt; do
- echo "Parameter: $opt"
- case $opt in
- j) java_runtime_set="yes";
- java_runtime="${OPTARG}"
- if [ ! -f "$java_runtime" ]; then
- errortext="Error: Invalid java runtime $java_runtime, file does not exist."
- errorcode="2"
- do_exit
- fi
- if [ ! -x "$java_runtime" ]; then
- errortext="Error: Invalid java runtime $java_runtime, not an executable file."
- errorcode="3"
- do_exit
- fi
- java_runtime_found="yes";
- ;;
- h) echo ${USAGE}
- errortext=""
- errorcode=""
- do_exit
- ;;
- \?) echo ${USAGE}
- errortext=""
- errorcode=""
- do_exit
- ;;
- esac
-done
-
-# changing into setup directory
-cd "`dirname "$0"`"
-
-# prepare jre, if not set on command line
-if [ "$java_runtime_set" != "yes" ]; then
- platform=`uname -s`
- if [ "`uname -s`" = "Linux" ]; then
- check_64bit_architecture
- if [ "$is_64bit_arch" = "no" ]; then
- install_linux_rpm
- else
- find_jre_in_path
- if [ "$java_runtime_found" = "yes" ]; then
- check_linux_jre_version
- if [ ! "$java_runtime_sufficient" = "yes" ]; then
- errortext="Error: Did not find a valid Java Runtime Environment (JRE). Required JRE versions: $java_versions_supported"
- errorcode="14"
- do_exit
- fi
- else
- errortext="Error: Did not find an installed Java Runtime Environment (JRE)."
- errorcode="15"
- do_exit
- fi
- fi
- elif [ "`uname -s`" = "SunOS" ]; then
- check_architecture
- find_jre_in_path
- if [ "$java_runtime_found" = "yes" ]; then
- check_jre_version
- if [ ! "$java_runtime_sufficient" = "yes" ]; then
- errortext="Error: Did not find a valid Java Runtime Environment (JRE). Required JRE versions: $java_versions_supported"
- errorcode="9"
- do_exit
- fi
- else
- errortext="Error: Did not find an installed Java Runtime Environment (JRE)."
- errorcode="10"
- do_exit
- fi
- else
- errortext="Error: Platform $platform not supported for Java Runtime Environment (JRE) installation."
- errorcode="1"
- do_exit
- fi
-fi
-
-# jre for Linux is also required, if java runtime is set (for uninstallation mode)
-if [ "$java_runtime_set" = "yes" ]; then
- platform=`uname -s`
- if [ "`uname -s`" = "Linux" ]; then
- set_jre_for_uninstall
- fi
-fi
-
-start_java
-
-cleanup
-
-exit 0
diff --git a/setup_native/scripts/update.sh b/setup_native/scripts/update.sh
deleted file mode 100644
index aac202fe6781..000000000000
--- a/setup_native/scripts/update.sh
+++ /dev/null
@@ -1,212 +0,0 @@
-#!/bin/sh
-#
-# This file is part of the LibreOffice project.
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-#
-# This file incorporates work covered by the following license notice:
-#
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements. See the NOTICE file distributed
-# with this work for additional information regarding copyright
-# ownership. The ASF licenses this file to you under the Apache
-# License, Version 2.0 (the "License"); you may not use this file
-# except in compliance with the License. You may obtain a copy of
-# the License at http://www.apache.org/licenses/LICENSE-2.0 .
-#
-
-GNOMEXCMDS="/usr/bin/gksu"
-GNOMECMDS="/usr/bin/gnome-terminal /opt/gnome/bin/gnome-terminal"
-KDEXCMDS="/usr/bin/kdesu /opt/kde/bin/kdesu /opt/kde?/bin/kdesu"
-KDECMDS="/usr/bin/konsole /opt/kde/bin/konsole /opt/kde?/bin/konsole"
-MISCCMDS="/usr/bin/x-terminal-emulator /usr/X11/bin/xterm /usr/openwin/bin/xterm"
-
-TITLE='${PRODUCTNAME} update'
-
-#
-# Usage
-#
-
-Usage () {
- if [ "`basename $0`" = "update" ]; then
- echo "Usage: `basename $0` [<path to ${PRODUCTNAME} installation>]"
- fi
- echo
- exit 2
-}
-
-make_tempfile() {
-
- # Always prefer mktemp when available
- if [ -x "$MKTEMP" ]; then
- "$MKTEMP" "/tmp/$1.XXXXXX"
- else
- TMPCMD="/tmp/$1.$$"
- touch $TMPCMD
- echo $TMPCMD
- fi
-
-}
-
-#
-# make_command_file - generate a command file to pass to xterm & co
-#
-run_in_terminal () {
-
- TMPCMD=`make_tempfile 'OpenOffice.org-Online-Update'`
-
- cat >> $TMPCMD
-
- cat >> $TMPCMD << \EOF
-if [ $? -eq 0 -a ! -z "$DISPLAY" ]; then
- echo
- echo "Press <Enter> to close this window"
- read DUMMY
-fi
-EOF
-
- cat >> $TMPCMD << EOF
-rm -f $TMPCMD
-EOF
-
- chmod a+x $TMPCMD
- exec "$@" -e $TMPCMD
-}
-
-#
-# run the command line passed as positional parameters either via
-# gksu/kdesu or via su command in a terminal emulator.
-#
-elevate() {
-
- TITLEOPT=""
- GEOMOPT=""
- case `basename $XTERM` in
- "xterm")
- TITLEOPT="-title"
- GEOMOPT="-geometry "
- ;;
- "gnome-terminal" | "konsole" | "x-terminal-emulator")
- TITLEOPT="--title"
- GEOMOPT="--geometry="
- ;;
- esac
-
- case `basename $SU` in
- "kdesu" )
- # --caption
- SUOPT="-t"
- ;;
- "gksu" )
- # --title
- SUOPT=""
- ;;
- "su" )
- SUOPT="- root -c"
- ;;
- esac
-
- ( echo "echo The application \"$@\" will update your ${PRODUCTNAME} installation."
- echo "echo"
- echo "$SU" "$SUOPT" "$@"
- ) | run_in_terminal "$XTERM" "$TITLEOPT" "$TITLE" ${GEOMOPT}+300+300
-}
-
-
-update_pkg() {
- ADMINFILE=`make_tempfile 'LibreOffice-Online-Update-admin'`
-
-cat >> $ADMINFILE << EOF
-action=nocheck
-conflict=nocheck
-setuid=nocheck
-idepend=nocheck
-rdepend=nocheck
-mail=
-EOF
-
- PKGLIST=""
- for i in `cd $1; ls -d *`; do
- pkginfo -q $i && PKGLIST="$PKGLIST $i"
- done
-
- pkgrm -n -a $ADMINFILE $PKGLIST
- pkgadd -n -a $ADMINFILE -d $1 $PKGLIST
-
- rm -f $ADMINFILE
-}
-
-#
-# main
-#
-
-CMD="`basename $0`"
-BASEDIR="`dirname $0`"
-ABSBASEDIR="`cd $BASEDIR; pwd`"
-
-if [ -z "$DISPLAY" ]; then
- SU="su"
- XTERM=""
-else
- # define search order depending on the desktop in use ..
- if [ "`uname -s`" = "SunOS" ]; then
- XPROP=/usr/openwin/bin/xprop
- GREP=/usr/xpg4/bin/grep
- MKTEMP=/usr/bin/mktemp
- else
- if [ -x /usr/X11/bin/xprop ]; then
- XPROP=/usr/X11/bin/xprop
- else
- XPROP=/usr/bin/xprop
- fi
- GREP=grep
- MKTEMP=/bin/mktemp
- fi
-
- # use desktop specific tools where possible, but prefer X11 su over terminal emulators
- if $XPROP -root | $GREP -q '^KWIN_RUNNING'; then
- SULIST="$KDEXCMDS $GNOMEXCMDS"
- XTERMLIST="$KDECMDS $MISCCMDS"
- else
- SULIST="$GNOMEXCMDS $KDEXCMDS"
- XTERMLIST="$GNOMECMDS $MISCCMDS"
- fi
-
- # search for the first available terminal emulator
- for i in $XTERMLIST; do
- if [ -x $i ]; then
- XTERM=$i
- break
- fi
- done
-
- # we prefer gksu or kdesu if available
- SU="su"
- for i in $SULIST; do
- if [ -x $i ]; then
- SU=$i
- break
- fi
- done
-fi
-
-if [ "$CMD" = "update" ]; then
- if [ $# -gt 0 ]; then
- [ -d $1 -a $# -eq 1 ] || Usage
- elevate "$ABSBASEDIR/$CMD"
- else
- if [ -d "$BASEDIR/RPMS" ]; then
- # do not use --hash as the control sequence to edit the current line does not work
- # in our setup (at least not with kdesu)
- rpm -v --freshen `find "$BASEDIR"/RPMS -name '*.rpm'`
- elif [ -d "$BASEDIR/DEBS" ]; then
- dpkg --install --selected-only --recursive "$BASEDIR"/DEBS
- elif [ -d "$BASEDIR/packages" ]; then
- update_pkg "$BASEDIR/packages"
- fi
- fi
-else
- Usage
-fi