diff options
Diffstat (limited to 'sc/inc/scerrors.hrc')
| -rw-r--r-- | sc/inc/scerrors.hrc | 111 |
1 files changed, 111 insertions, 0 deletions
diff --git a/sc/inc/scerrors.hrc b/sc/inc/scerrors.hrc new file mode 100644 index 000000000000..9e8b89d4d6f2 --- /dev/null +++ b/sc/inc/scerrors.hrc @@ -0,0 +1,111 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef INCLUDED_SC_INC_SCERRORS_HRC +#define INCLUDED_SC_INC_SCERRORS_HRC + +#define NC_(Context, String) (Context "\004" u8##String) + +#include "scerrors.hxx" + +const ErrMsgCode RID_ERRHDLSC[] = +{ + // ERRORS ----------------------------------------------------- + { NC_("RID_ERRHDLSC", "Impossible to connect to the file.") , + ErrCode(sal_uInt32(SCERR_IMPORT_CONNECT) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "File could not be opened.") , + ErrCode(sal_uInt32(SCERR_IMPORT_OPEN) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "An unknown error has occurred.") , + ErrCode(sal_uInt32(SCERR_IMPORT_UNKNOWN) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Not enough memory while importing.") , + ErrCode(sal_uInt32(SCERR_IMPORT_OUTOFMEM) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Unknown Lotus1-2-3 file format.") , + ErrCode(sal_uInt32(SCERR_IMPORT_UNKNOWN_WK) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Error in file structure while importing.") , + ErrCode(sal_uInt32(SCERR_IMPORT_FORMAT) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "There is no filter available for this file type.") , + ErrCode(sal_uInt32(SCERR_IMPORT_NI) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Unknown or unsupported Excel file format.") , + ErrCode(sal_uInt32(SCERR_IMPORT_UNKNOWN_BIFF) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Excel file format not yet implemented.") , + ErrCode(sal_uInt32(SCERR_IMPORT_NI_BIFF) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "This file is password-protected.") , + ErrCode(sal_uInt32(SCERR_IMPORT_FILEPASSWD) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Internal import error.") , + ErrCode(sal_uInt32(SCERR_IMPORT_INTERNAL) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The file contains data after row 8192 and therefore can not be read.") , + ErrCode(sal_uInt32(SCERR_IMPORT_8K_LIMIT) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Format error discovered in the file in sub-document $(ARG1) at $(ARG2)(row,col)."), + ErrCode(sal_uInt32(SCERR_IMPORT_FILE_ROWCOL) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "File format error found at $(ARG1)(row,col).") , + ErrCode(sal_uInt32(SCERR_IMPORT_FORMAT_ROWCOL) & ERRCODE_RES_MASK) }, + + // Export ---------------------------------------------------- + { NC_("RID_ERRHDLSC", "Connection to the file could not be established.") , + ErrCode(sal_uInt32(SCERR_EXPORT_CONNECT) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Data could not be written.") , + ErrCode(sal_uInt32(SCERR_EXPORT_DATA) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "$(ARG1)") , + ErrCode(sal_uInt32(SCERR_EXPORT_SQLEXCEPTION) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Cell $(ARG1) contains characters that are not representable in the selected target character set \"$(ARG2)\".") , + ErrCode(sal_uInt32(SCERR_EXPORT_ENCODING) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Cell $(ARG1) contains a string that is longer in the selected target character set \"$(ARG2)\" than the given field width.") , + ErrCode(sal_uInt32(SCERR_EXPORT_FIELDWIDTH) & ERRCODE_RES_MASK) }, + + // WARNINGS --------------------------------------------------- + { NC_("RID_ERRHDLSC", "Only the active sheet was saved.") , + ErrCode(sal_uInt32(SCWARN_EXPORT_ASCII) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The maximum number of rows has been exceeded. Excess rows were not imported!") , + ErrCode(sal_uInt32(SCWARN_IMPORT_RANGE_OVERFLOW) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The data could not be loaded completely because the maximum number of rows per sheet was exceeded.") , + ErrCode(sal_uInt32(SCWARN_IMPORT_ROW_OVERFLOW) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The data could not be loaded completely because the maximum number of columns per sheet was exceeded.") , + ErrCode(sal_uInt32(SCWARN_IMPORT_COLUMN_OVERFLOW) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Not all sheets have been loaded because the maximum number of sheets was exceeded.\n\nPlease be warned that re-saving this document will permanently delete those sheets that have not been loaded!") , + ErrCode(sal_uInt32(SCWARN_IMPORT_SHEET_OVERFLOW) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The data could not be loaded completely because the maximum number of characters per cell was exceeded.") , + ErrCode(sal_uInt32(SCWARN_IMPORT_CELL_OVERFLOW) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Corresponding FM3-File could not be opened.") , + ErrCode(sal_uInt32(SCWARN_IMPORT_OPEN_FM3) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Error in file structure of corresponding FM3-File.") , + ErrCode(sal_uInt32(SCWARN_IMPORT_WRONG_FM3) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Document too complex for automatic calculation. Press F9 to recalculate.") , + ErrCode(sal_uInt32(SCWARN_CORE_HARD_RECALC) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The document contains more rows than supported in the selected format.\nAdditional rows were not saved.") , + ErrCode(sal_uInt32(SCWARN_EXPORT_MAXROW) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The document contains more columns than supported in the selected format.\nAdditional columns were not saved.") , + ErrCode(sal_uInt32(SCWARN_EXPORT_MAXCOL) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The document contains more sheets than supported in the selected format.\nAdditional sheets were not saved.") , + ErrCode(sal_uInt32(SCWARN_EXPORT_MAXTAB) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The document contains information not recognized by this program version.\nResaving the document will delete this information!") , + ErrCode(sal_uInt32(SCWARN_IMPORT_INFOLOST) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Not all cell contents could be saved in the specified format.") , + ErrCode(sal_uInt32(SCWARN_EXPORT_DATALOST) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "The following characters could not be converted to the selected character set\nand were written as Ӓ surrogates:\n\n$(ARG1)"), + ErrCode(sal_uInt32(SCWARN_EXPORT_NONCONVERTIBLE_CHARS) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Format error discovered in the file in sub-document $(ARG1) at $(ARG2)(row,col)."), + ErrCode(sal_uInt32(SCWARN_IMPORT_FILE_ROWCOL) & ERRCODE_RES_MASK) }, + { NC_("RID_ERRHDLSC", "Not all attributes could be read.") , + ErrCode(sal_uInt32(SCWARN_IMPORT_FEATURES_LOST) & ERRCODE_RES_MASK) }, + { nullptr, ERRCODE_NONE } +}; + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |