diff options
Diffstat (limited to 'psprint_config/configuration/ppds/TK350691.PS')
| -rw-r--r-- | psprint_config/configuration/ppds/TK350691.PS | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/psprint_config/configuration/ppds/TK350691.PS b/psprint_config/configuration/ppds/TK350691.PS new file mode 100644 index 000000000000..dcbf22bb5de8 --- /dev/null +++ b/psprint_config/configuration/ppds/TK350691.PS @@ -0,0 +1 @@ +*PPD-Adobe: "4.3"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1995 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.3"
*FileVersion: "1.2"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*Product: "(Phaser 350)"
*PSVersion: "(2015.105) 10"
*Manufacturer: "Tektronix"
*ModelName: "Tektronix Phaser 350 Extended"
*ShortNickName: "Tektronix Phaser 350 Extended"
*NickName: "Tektronix Phaser 350 Extended"
*PCFileName: "TK350691.PPD"
*% === Installable Options ===========
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *Option1/Optional Hard Drive: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*?Option1: "
save false
(%disk?%)
{ currentdevparams dup /Writeable known
{ /Writeable get {pop true} if } {pop} ifelse
} 10 string /IODevice resourceforall
{(True)}{(False)} ifelse = flush
restore"
*End
*CloseUI: *Option1
*OpenUI *Option2/Optional Network Card: PickOne
*DefaultOption2: None
*Option2 None/Not Installed: ""
*Option2 P1/EtherTalk, NetWare and TCP/IP: ""
*Option2 P2/TokenTalk, NetWare and TCP/IP: ""
*Option2 P3/LocalTalk and Serial: ""
*?Option2: "
(%EthernetPhysical%) /IODevice resourcestatus
{pop pop (P1) }
{
(%LocalTalk%) /IODevice resourcestatus
{pop pop (P3) }
{
(%TokenRingPhysical%) /IODevice resourcestatus
{pop pop (P2) } { (None) } ifelse
} ifelse
} ifelse = flush"
*End
*CloseUI: *Option2
*OpenUI *Option3/Optional Lower Tray: Boolean
*DefaultOption3: False
*Option3 True/Installed: ""
*Option3 False/Not Installed: ""
*?Option3: "
currentpagedevice /InputAttributes get 1 known
{ (True) } { (False) } ifelse = flush"
*End
*CloseUI: *Option3
*CloseGroup: InstallableOptions
*% === Constraints ===================
*UIConstraints: *Option1 False *TKCollate True
*UIConstraints: *Option3 False *InputSlot Lower
*UIConstraints: *TKCollate True *Option1 False
*UIConstraints: *InputSlot Lower *Option3 False
*% === Basic Device Capabilities ============
*LanguageLevel: "2"
*Protocols: BCP
*FreeVM: "4700000"
*ColorDevice: True
*DefaultColorSpace: CMYK
*AccurateScreensSupport: True
*SuggestedJobTimeout: "0"
*SuggestedWaitTimeout: "300"
*SuggestedManualFeedTimeout: "60"
*1284Modes Parallel: Compat Nibble
*1284DeviceID: "
MANUFACTURER:Tektronix;COMMAND SET:Adobe Level 2 PostScript;
MODEL:Phaser 350P;CLASS:Printer;DESCRIPTION:
Phaser 350 Color Page Printer, PostScript Level 2, Letter / A4 Size;
COMPATIBLE_ID:"
*End
*TTRasterizer: Type42
*?TTRasterizer: "
save
42 /FontType resourcestatus
{ pop pop (Type42)} {pop pop (None)} ifelse = flush
restore
"
*End
*FileSystem: True
*?FileSystem: "
save false
(%disk?%)
{ currentdevparams dup /Writeable known
{ /Writeable get {pop true} if } {pop} ifelse
} 10 string /IODevice resourceforall
{(True)}{(False)} ifelse = flush
restore
"
*End
*Throughput: "6"
*Password: "(0)"
*ExitServer: "
count 0 eq
{ false } { true exch startjob } ifelse
not
{ (WARNING: Cannot modify initial VM.) =
(Missing or invalid password.) =
(Please contact the author of this software.) = flush quit
} if
"
*End
*Reset: "
count 0 eq
{ false } { true exch startjob } ifelse
not
{ (WARNING: Cannot reset printer.) =
(Missing or invalid password.) =
(Please contact the author of this software.) = flush quit
} if
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*% Resolution/Print Quality Selection ===================
*DefaultResolution: 300x300dpi
*SetResolution 300x300dpi : ""
*SetResolution 600x300dpi : ""
*OpenUI *OutputMode/Print Quality: PickOne
*OrderDependency: 40.0 AnySetup *OutputMode
*DefaultOutputMode: Standard
*OutputMode FastColor/Fast Color: "
<<
/HWResolution /Default /OutputDevice findresource /HWResolution get 0 get
>> setpagedevice"
*End
*OutputMode Standard/Standard: "
<<
/HWResolution /Default /OutputDevice findresource /HWResolution get 1 get
>> setpagedevice"
*End
*OutputMode Enhanced/Enhanced: "
<<
/HWResolution /Default /OutputDevice findresource /HWResolution get
dup length 1 sub get
>> setpagedevice"
*End
*?OutputMode: "
currentpagedevice /HWResolution get 0 get dup 300 lt
{
pop (FastColor)
}
{
300 gt
{
(Enhanced)
}
{
(Standard)
} ifelse
} ifelse
= flush"
*End
*CloseUI: *OutputMode
*% Halftone Information =================
*DefaultHalftoneType: 9
*ScreenFreq: "60.0"
*ScreenAngle: "0.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{180 mul cos exch 180 mul cos add 2 div} bind"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub } bind"
*% Tray Selection ============
*OpenUI *InputSlot: PickOne
*OrderDependency: 42.0 AnySetup *InputSlot
*DefaultInputSlot: Paper
*InputSlot Upper: "
<<
/MediaPosition 0
/MediaType null
/TraySwitch false
/ManualFeed false
>> setpagedevice"
*End
*InputSlot Lower: "
<<
/MediaPosition 1
/MediaType null
/TraySwitch false
/ManualFeed false
>> setpagedevice"
*End
*InputSlot Paper: "
<<
/MediaPosition null
/MediaType (Paper)
/TraySwitch true
/ManualFeed false
>> setpagedevice"
*End
*InputSlot Transparency: "
<<
/MediaPosition null
/MediaType (Transparency)
/TraySwitch true
/ManualFeed false
>> setpagedevice"
*End
*InputSlot ManualPaper/Manual Paper: "
<<
/MediaPosition null
/MediaType (Paper)
/TraySwitch false
/ManualFeed true
>> setpagedevice"
*End
*InputSlot ManualTransparency/Manual Transparency: "
<<
/MediaPosition null
/MediaType (Transparency)
/TraySwitch false
/ManualFeed true
>> setpagedevice"
*End
*?InputSlot: "
save
currentpagedevice /MediaPosition get
dup null eq
{ pop currentpagedevice /MediaType get
dup null eq
{ pop (Upper) }
{ dup (Paper) eq
{ pop currentpagedevice /ManualFeed get
{ (ManualPaper) }
{ (Paper) } ifelse
}
{
(Transparency) eq
{ currentpagedevice /ManualFeed get
{ (ManualTransparency) }
{ (Transparency) } ifelse
}
{ (Unknown) } ifelse
} ifelse
} ifelse
}
{
dup 0 eq
{ pop (Upper) }
{ 1 eq
{ (Lower) }
{ (Unknown) } ifelse
} ifelse
} ifelse
= flush restore"
*End
*CloseUI: *InputSlot
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 44.0 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "<< /PageSize [612 792] /ImagingBBox null
>> setpagedevice"
*End
*PageSize A4: "<< /PageSize [595 842] /ImagingBBox null
>> setpagedevice"
*End
*?PageSize: "
save currentpagedevice /PageSize get aload pop
2 copy gt {exch} if (Unknown)
<<
[612 792] (Letter)
[595 842] (A4) >>
{ exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and
{ exch pop exit } { pop } ifelse
} bind forall = flush pop pop restore"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 46.0 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "<< /PageSize [612 792] /ImagingBBox null
>> setpagedevice"
*End
*PageRegion A4: "<< /PageSize [595 842] /ImagingBBox null
>> setpagedevice"
*End
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "14.16 25.8 597.84 777.96"
*ImageableArea A4: "13.45 25.81 581.76 827.88"
*?ImageableArea: "
<< /HWResolution [300 300] >> setpagedevice
clippath pathbbox
/cvp {16 string cvs print ( ) print} def
4 3 roll 100 mul ceiling 100 div cvp
3 2 roll 100 mul ceiling 100 div cvp
exch 100 mul floor 100 div cvp
100 mul floor 100 div = flush
userdict /cvp undef"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension A4: "595 842"
*DefaultOutputOrder: Normal
*RequiresPageRegion All: True
*OpenUI *TKCollate/Quick Collate: Boolean
*OrderDependency: 48.0 AnySetup *TKCollate
*DefaultTKCollate: False
*TKCollate False: "
<<
/Collate false
>> setpagedevice"
*End
*TKCollate True: "
<<
/Collate true
>> setpagedevice"
*End
*?TKCollate: "
save
currentpagedevice /Collate get {(True)}{(False)}ifelse
= flush restore"
*End
*CloseUI: *TKCollate
*% TKColor Selections ===================
*OpenUI *TKColor/Color Correction: PickOne
*OrderDependency: 50.0 AnySetup *TKColor
*DefaultTKColor: VividColor/Vivid Color
*TKColor NoAdjust/None: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice null
>>
>> setpagedevice"
*End
*TKColor VividColor/Vivid Color: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice <<
/Type 3
/ColorTransform /TekBlue
>>
>>
>> setpagedevice"
*End
*TKColor SimulateDisplay/Simulate Display: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice <<
/Type 3
/ColorTransform /TekDisplay
>>
>>
>> setpagedevice"
*End
*TKColor SWOPPress/SWOP Press: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice <<
/Type 3
/ColorTransform /SWOP-Coated
>>
>>
>> setpagedevice"
*End
*TKColor EuroscalePress/Euroscale Press: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice <<
/Type 3
/ColorTransform /Euroscale-Coated
>>
>>
>> setpagedevice"
*End
*TKColor CommercialPress/Commercial Press: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice <<
/Type 3
/ColorTransform /Commercial-Coated
>>
>>
>> setpagedevice"
*End
*TKColor Monochrome: "
<<
/DeviceRenderingInfo <<
/Type 2
/VirtualColorDevice <<
/Type 1
/ColorTransform /Gray
>>
>>
>> setpagedevice"
*End
*TKColor UsePrinterSetting/Use Printer Setting: ""
*?TKColor: "save
{ currentpagedevice /DeviceRenderingInfo get
/VirtualColorDevice get
dup null eq
{ pop (NoAdjust) }
{ /ColorTransform get
<<
/TekBlue (VividColor)
/TekDisplay (SimulateDisplay)
/SWOP-Coated (SWOPPress)
/Euroscale-Coated (EuroscalePress)
/Commercial-Coated (CommercialPress)
/Gray (Monochrome)
>>
exch get
} ifelse
} stopped
{ % error in PostScript code execution
pop pop (Unknown)
} if
= flush restore"
*End
*CloseUI: *TKColor
*OpenUI *TKCheckPrint/Check Print: Boolean
*OrderDependency: 52.0 AnySetup *TKCheckPrint
*DefaultTKCheckPrint: False
*TKCheckPrint False: ""
*TKCheckPrint True: "
/RRCustomProcs /ProcSet findresource
/setcheckprint get exec"
*End
*?TKCheckPrint: "
/RRCustomProcs /ProcSet findresource
/currentcheckprint get exec {(True)}{(False)}ifelse
= flush"
*End
*CloseUI: *TKCheckPrint
*OpenUI *TKImageSmoothing/Image Smoothing: Boolean
*OrderDependency: 54.0 AnySetup *TKImageSmoothing
*DefaultTKImageSmoothing: False
*TKImageSmoothing False: "
false /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec"
*End
*TKImageSmoothing True: "
true /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec"
*End
*?TKImageSmoothing: "
save
/RRCustomProcs /ProcSet findresource /currentforceinterpolate get exec
{(True)}{(False)} ifelse
= flush restore"
*End
*CloseUI: *TKImageSmoothing
*% Font Information =====================
*DefaultFont: Courier
*Font ACaslon-Italic: Standard "(001.001)" Standard ROM
*Font ACaslon-Regular: Standard "(001.001)" Standard ROM
*Font ACaslon-Semibold: Standard "(001.001)" Standard ROM
*Font ACaslon-SemiboldItalic: Standard "(001.001)" Standard ROM
*Font AGaramond-Bold: Standard "(001.001)" Standard ROM
*Font AGaramond-BoldItalic: Standard "(001.001)" Standard ROM
*Font AGaramond-Italic: Standard "(001.001)" Standard ROM
*Font AGaramond-Regular: Standard "(001.001)" Standard ROM
*Font Americana: Standard "(001.000)" Standard ROM
*Font Americana-ExtraBold: Standard "(001.000)" Standard ROM
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Barmeno-Bold: Standard "(001.000)" Standard ROM
*Font Barmeno-ExtraBold: Standard "(001.000)" Standard ROM
*Font Barmeno-Medium: Standard "(001.000)" Standard ROM
*Font Barmeno-Regular: Standard "(001.000)" Standard ROM
*Font Blackoak: Standard "(001.001)" Standard ROM
*Font Bookman-Demi: Standard "(001.003)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.003)" Standard ROM
*Font Bookman-Light: Standard "(001.003)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.003)" Standard ROM
*Font Carta: Special "(001.001)" Special ROM
*Font Courier: Standard "(002.003)" Standard ROM
*Font Courier-Bold: Standard "(002.003)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
*Font Courier-Oblique: Standard "(002.003)" Standard ROM
*Font Formata-Italic: Standard "(001.001)" Standard ROM
*Font Formata-Medium: Standard "(001.001)" Standard ROM
*Font Formata-MediumItalic: Standard "(001.001)" Standard ROM
*Font Formata-Regular: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Condensed: Standard "(001.001)" Standard ROM
*Font Helvetica-Condensed-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-Condensed-BoldObl: Standard "(001.002)" Standard ROM
*Font Helvetica-Condensed-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font Kaufmann: Standard "(001.000)" Standard ROM
*Font Lithos-Black: Standard "(001.001)" Standard ROM
*Font Lithos-Regular: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.008)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.005)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.006)" Standard ROM
*Font Palatino-Bold: Standard "(001.005)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005)" Standard ROM
*Font Palatino-Italic: Standard "(001.005)" Standard ROM
*Font Palatino-Roman: Standard "(001.005)" Standard ROM
*Font Parisian: Standard "(001.001)" Standard ROM
*Font ParkAvenue: Standard "(001.005)" Standard ROM
*Font Poetica-SuppOrnaments: Special "(001.000)" Special ROM
*Font Symbol: Special "(001.007)" Special ROM
*Font Tekton: Standard "(001.001)" Standard ROM
*Font Tekton-Bold: Standard "(001.000)" Standard ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*Font Trajan-Bold: Standard "(001.000)" Standard ROM
*Font WoodtypeOrnaments-Two: Special "(001.002)" Special ROM
*Font ZapfChancery-MediumItalic: Standard "(001.006)" Standard ROM
*Font ZapfDingbats: Special "(001.004)" Special ROM
*?FontQuery: "
save
{ count 1 gt
{ exch dup 127 string cvs (/) print print (:) print
/Font resourcestatus {pop pop (Yes)} {(No)} ifelse =
} { exit } ifelse
} bind loop
(*) = flush restore"
*End
*?FontList: "
save (*) {cvn ==} 128 string /Font resourceforall
(*) = flush restore"
*End
*DefaultColorSep: ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300x300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenAngle ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
*% The byte count of this file should be exactly 017624 or 018240
*% depending on the filesystem it resides in.
*% end of PPD file for Tektronix Phaser 350
\ No newline at end of file |