1 files changed, 0 insertions, 551 deletions
diff --git a/psprint_config/configuration/ppds/TK350171.PS b/psprint_config/configuration/ppds/TK350171.PS
deleted file mode 100644
index b0bf8e0d5dca..000000000000
--- a/psprint_config/configuration/ppds/TK350171.PS
+++ /dev/null
@@ -1,551 +0,0 @@
-*PPD-Adobe: "4.3"
-*% Adobe Systems PostScript(R) Printer Description File
-*% Copyright 1987-1995 Adobe Systems Incorporated. 
-*% All Rights Reserved. 
-*% Permission is granted for redistribution of this file as
-*% long as this copyright notice is intact and the contents
-*% of the file is not altered in any way from its original form.
-*% End of Copyright statement
-*FormatVersion: "4.3"
-*FileVersion: "1.2"
-*LanguageEncoding: ISOLatin1
-*LanguageVersion: English
-*Product: "(Phaser 350)"
-*PSVersion: "(2015.105) 10"
-*Manufacturer: "Tektronix"
-*ModelName: "Tektronix Phaser 350"
-*ShortNickName: "Tektronix Phaser 350"
-*NickName: "Tektronix Phaser 350"
-*PCFileName: "TK350171.PPD"
-
-*% === Installable Options ===========
-*OpenGroup: InstallableOptions/Options Installed
-
-*OpenUI *InstalledMemory/Memory Configuration: PickOne
-*DefaultInstalledMemory: 24Meg
-*InstalledMemory None/Standard 8 MB RAM: ""
-*InstalledMemory 12Meg/12 MB Total RAM: ""
-*InstalledMemory 24Meg/24 MB Total RAM: ""
-*?InstalledMemory: "
- currentsystemparams /RamSize get
- 16#100000 div round cvi
- dup 14 lt
- { pop (None) } {2 string cvs print (Meg) } ifelse
- = flush"
-*End
-*CloseUI: *InstalledMemory
-
-*OpenUI *Option1/Optional Hard Drive: Boolean
-*DefaultOption1: False
-*Option1 True/Installed: ""
-*Option1 False/Not Installed: ""
-*?Option1: "
- save false
- (%disk?%)
- { currentdevparams dup /Writeable known
-   { /Writeable get {pop true} if }  {pop} ifelse
- } 10 string /IODevice resourceforall
- {(True)}{(False)} ifelse = flush
- restore"
-*End
-*CloseUI: *Option1
-
-*OpenUI *Option2/Optional Network Card: PickOne
-*DefaultOption2: None
-*Option2 None/Not Installed: ""
-*Option2 P1/EtherTalk, NetWare and TCP/IP: ""
-*Option2 P2/TokenTalk, NetWare and TCP/IP: ""
-*Option2 P3/LocalTalk and Serial: ""
-*?Option2: "
- (%EthernetPhysical%) /IODevice resourcestatus
- {pop pop (P1) }
- {
-   (%LocalTalk%) /IODevice resourcestatus
-   {pop pop (P3) }
-   {
-     (%TokenRingPhysical%) /IODevice resourcestatus
-     {pop pop (P2) } { (None) } ifelse
-   } ifelse
- } ifelse = flush"
-*End
-*CloseUI: *Option2
-
-*OpenUI *Option3/Optional Lower Tray: Boolean
-*DefaultOption3: False
-*Option3 True/Installed: ""
-*Option3 False/Not Installed: ""
-*?Option3: "
-currentpagedevice /InputAttributes get 1 known
-{ (True) } { (False) } ifelse = flush"
-*End
-*CloseUI: *Option3
-
-*CloseGroup: InstallableOptions
-
-*% === Basic Device Capabilities ============
-*LanguageLevel: "2"
-*Protocols: BCP
-
-*FreeVM: "16000000"
-*VMOption None/Standard 8 MB RAM: "2300000"
-*VMOption 12Meg/12 MB Total RAM: "6100000"
-*VMOption 24Meg/24 MB Total RAM: "16000000"
-*ColorDevice: True
-*DefaultColorSpace: CMYK
-*AccurateScreensSupport: True
-*SuggestedJobTimeout: "0"
-*SuggestedWaitTimeout: "300"
-*SuggestedManualFeedTimeout: "60"
-*1284Modes Parallel: Compat Nibble
-*1284DeviceID: "
-  MANUFACTURER:Tektronix;COMMAND SET:Adobe Level 2 PostScript;
-  MODEL:Phaser 350;CLASS:Printer;DESCRIPTION:
-  Phaser 350 Color Page Printer, PostScript Level 2, Letter / A4 Size;
-  COMPATIBLE_ID:"
-*End
-*TTRasterizer: Type42
-*?TTRasterizer: "
- save
- 42 /FontType resourcestatus
- { pop pop (Type42)} {pop pop (None)} ifelse = flush
- restore
- "
-*End
-
-
-*FileSystem: True
-*?FileSystem: "
-  save false
-  (%disk?%)
-  { currentdevparams dup /Writeable known
-    { /Writeable get {pop true} if }  {pop} ifelse
-  } 10 string /IODevice resourceforall
-  {(True)}{(False)} ifelse = flush
-  restore"
-*End
-
-*Throughput: "6"
-*Password: "(0)"
-*ExitServer: "
-  count 0 eq
-  { false } { true exch startjob } ifelse
-  not
-  { (WARNING: Cannot modify initial VM.) =
-    (Missing or invalid password.) =
-    (Please contact the author of this software.) = flush quit
-  } if
-"
-*End
-*Reset: "
-  count 0 eq
-  { false } { true exch startjob } ifelse
-  not
-  { (WARNING: Cannot reset printer.) =
-    (Missing or invalid password.) =
-    (Please contact the author of this software.) = flush quit
-  } if
-  systemdict /quit get exec
-  (WARNING : Printer Reset Failed.) = flush"
-*End
-
-*% === Constraints ===================
-*%
-*UIConstraints: *InstalledMemory None *OutputMode Enhanced
-*UIConstraints: *InstalledMemory 12Meg *OutputMode Enhanced
-*UIConstraints: *VMOption None *OutputMode Enhanced
-*UIConstraints: *VMOption 12Meg *OutputMode Enhanced
-*UIConstraints: *Option3 False *InputSlot Lower
-
-*UIConstraints: *OutputMode Enhanced *InstalledMemory None
-*UIConstraints: *OutputMode Enhanced *InstalledMemory 12Meg
-*UIConstraints: *OutputMode Enhanced *VMOption None
-*UIConstraints: *OutputMode Enhanced *VMOption 12Meg
-*UIConstraints: *InputSlot Lower *Option3 False
-
-*% Resolution/Print Quality Selection  ===================
-
-*DefaultResolution: 300x300dpi
-
-*SetResolution 300x300dpi : ""
-*SetResolution 600x300dpi : ""
-
-*OpenUI *OutputMode/Print Quality: PickOne
-*OrderDependency: 40.0 AnySetup *OutputMode
-*DefaultOutputMode: Standard
-*OutputMode FastColor/Fast Color: "
- <<
-   /HWResolution /Default /OutputDevice findresource /HWResolution get 0 get
- >> setpagedevice"
-*End
-
-*OutputMode Standard/Standard: "
-<<
-   /HWResolution /Default /OutputDevice findresource /HWResolution get 1 get
->> setpagedevice"
-*End
-
-*OutputMode Enhanced/Enhanced: "
-<<
-   /HWResolution /Default /OutputDevice findresource /HWResolution get
-   dup length 1 sub get
->> setpagedevice"
-*End
-
-*?OutputMode: "
-  currentpagedevice /HWResolution get 0 get dup 300 lt
-    {
-      pop (FastColor)
-    }
-    {
-      300 gt
-      {
-        (Enhanced)
-      }
-      {
-        (Standard)
-      } ifelse
-    } ifelse
-    = flush"
-*End
-*CloseUI: *OutputMode
-
-*% Halftone Information =================
-
-*DefaultHalftoneType: 9
-*ScreenFreq: "60.0"
-*ScreenAngle: "0.0"
-*DefaultScreenProc: Dot
-*ScreenProc Dot: "
- {180 mul cos exch 180 mul cos add 2 div} bind"
-*End
-*DefaultTransfer: Null
-*Transfer Null: "{ }"
-*Transfer Null.Inverse: "{ 1 exch sub } bind"
-
-*% Tray Selection ============
-
-*OpenUI *InputSlot: PickOne
-*OrderDependency: 42.0 AnySetup *InputSlot
-*DefaultInputSlot: Paper
-*InputSlot Upper: "
-  <<
-    /MediaPosition 0
-    /MediaType null
-    /TraySwitch false
-    /ManualFeed false
-  >>  setpagedevice"
-*End
-*InputSlot Lower: "
-  <<
-    /MediaPosition 1
-    /MediaType null
-    /TraySwitch false
-    /ManualFeed false
-  >>  setpagedevice"
-*End
-*InputSlot Paper: "
-  <<
-    /MediaPosition null
-    /MediaType (Paper)
-    /TraySwitch true
-    /ManualFeed false
-  >>  setpagedevice"
-*End
-*InputSlot Transparency: "
-  <<
-      /MediaPosition null
-      /MediaType (Transparency)
-      /TraySwitch true
-      /ManualFeed false
-  >>  setpagedevice"
-*End
-*InputSlot ManualPaper/Manual Paper: "
-  <<
-    /MediaPosition null
-    /MediaType (Paper)
-    /TraySwitch false
-    /ManualFeed true
-  >>  setpagedevice"
-*End
-*InputSlot ManualTransparency/Manual Transparency: "
-  <<
-    /MediaPosition null
-    /MediaType (Transparency)
-    /TraySwitch false
-    /ManualFeed true
-  >>  setpagedevice"
-*End
-*?InputSlot: "
-  save
-  currentpagedevice /MediaPosition get
-  dup null eq
-  { pop currentpagedevice /MediaType get
-    dup null eq
-    { pop (Upper) }
-    { dup (Paper) eq
-      { pop currentpagedevice /ManualFeed get
-        { (ManualPaper) }
-        { (Paper) } ifelse
-      }
-      {
-        (Transparency) eq
-        { currentpagedevice /ManualFeed get
-          { (ManualTransparency) }
-          { (Transparency) } ifelse
-        }
-        { (Unknown) } ifelse
-      } ifelse
-    } ifelse
-  }
-  {
-    dup 0 eq
-    { pop (Upper) }
-    { 1 eq
-      { (Lower) }
-      { (Unknown) } ifelse
-    } ifelse
-  } ifelse
-  = flush restore"
-*End
-*CloseUI: *InputSlot
-
-*% Paper Handling ===================
-
-*% Use these entries to set paper size most of the time, unless there is
-*% specific reason to use PageRegion.
-*OpenUI *PageSize: PickOne
-*OrderDependency: 44.0 AnySetup *PageSize
-*DefaultPageSize: Letter
-*PageSize Letter: "<<  /PageSize [612 792] /ImagingBBox null
-  >>  setpagedevice"
-*End
-*PageSize A4: "<<  /PageSize [595 842] /ImagingBBox null
-  >>  setpagedevice"
-*End
-*?PageSize: "
-  save currentpagedevice /PageSize get aload pop
-  2 copy gt {exch} if (Unknown)
-  <<
-  [612 792] (Letter)
-  [595 842] (A4) >>
-  { exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and
-  	{ exch pop exit } { pop } ifelse
-  } bind forall = flush pop pop restore"
-*End
-*CloseUI: *PageSize
-
-*% These entries will set up the frame buffer. Usually used with manual feed.
-*OpenUI *PageRegion: PickOne
-*OrderDependency: 46.0 AnySetup *PageRegion
-*DefaultPageRegion: Letter
-*PageRegion Letter: "<<  /PageSize [612 792] /ImagingBBox null
-  >>  setpagedevice"
-*End
-*PageRegion A4: "<<  /PageSize [595 842] /ImagingBBox null
-  >>  setpagedevice"
-*End
-*CloseUI: *PageRegion
-
-*% The following entries provide information about specific paper keywords.
-*DefaultImageableArea: Letter
-*ImageableArea Letter: "14.16 25.8 597.84 777.96"
-*ImageableArea A4: "13.45 25.81 581.76 827.88"
-*?ImageableArea: "
-<< /HWResolution [300 300] >> setpagedevice
-  clippath pathbbox
-  /cvp {16 string cvs print ( ) print} def
-  4 3 roll 100 mul ceiling 100 div cvp
-  3 2 roll 100 mul ceiling 100 div cvp
-  exch 100 mul floor 100 div cvp
-  100 mul floor 100 div = flush
-  userdict /cvp undef"
-*End
-
-*% These provide the physical dimensions of the paper (by keyword)
-*DefaultPaperDimension: Letter
-*PaperDimension Letter: "612 792"
-*PaperDimension A4: "595 842"
-
-*DefaultOutputOrder: Normal
-*RequiresPageRegion All: True
-
-*% TKColor Selections  ===================
-*OpenUI *TKColor/Color Correction: PickOne
-*OrderDependency: 50.0 AnySetup *TKColor
-*DefaultTKColor: VividColor/Vivid Color
-*TKColor NoAdjust/None: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice null
-    >>
-  >>  setpagedevice"
-*End
-*TKColor VividColor/Vivid Color: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice <<
-        /Type 3
-        /ColorTransform /TekBlue
-      >>
-    >>
-   >>  setpagedevice"
-*End
-*TKColor SimulateDisplay/Simulate Display: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice <<
-        /Type 3
-        /ColorTransform /TekDisplay
-      >>
-    >>
-   >>  setpagedevice"
-*End
-*TKColor SWOPPress/SWOP Press: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice <<
-        /Type 3
-        /ColorTransform /SWOP-Coated
-      >>
-    >>
-   >>  setpagedevice"
-*End
-*TKColor EuroscalePress/Euroscale Press: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice <<
-        /Type 3
-        /ColorTransform /Euroscale-Coated
-      >>
-    >>
-   >>  setpagedevice"
-*End
-*TKColor CommercialPress/Commercial Press: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice <<
-        /Type 3
-        /ColorTransform /Commercial-Coated
-      >>
-    >>
-   >>  setpagedevice"
-*End
-*TKColor Monochrome: "
-  <<
-    /DeviceRenderingInfo <<
-      /Type 2
-      /VirtualColorDevice <<
-        /Type 1
-        /ColorTransform /Gray
-      >>
-    >>
-   >>  setpagedevice"
-*End
-*TKColor UsePrinterSetting/Use Printer Setting: ""
-*?TKColor: "save
-  { currentpagedevice /DeviceRenderingInfo get
-    /VirtualColorDevice get
-    dup null eq
-    { pop (NoAdjust) }
-    { /ColorTransform get
-      <<
-        /TekBlue           (VividColor)
-        /TekDisplay        (SimulateDisplay)
-        /SWOP-Coated       (SWOPPress)
-        /Euroscale-Coated  (EuroscalePress)
-        /Commercial-Coated (CommercialPress)
-        /Gray              (Monochrome)
-      >>
-      exch get
-    } ifelse
-  } stopped
-  { % error in PostScript code execution
-    pop pop (Unknown)
-  } if
-  = flush restore"
-*End
-*CloseUI: *TKColor
-
-*OpenUI *TKImageSmoothing/Image Smoothing: Boolean
-*OrderDependency: 52.0 AnySetup *TKImageSmoothing
-*DefaultTKImageSmoothing: False
-*TKImageSmoothing False: "
-  false /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec"
-*End
-*TKImageSmoothing True: "
-  true /RRCustomProcs /ProcSet findresource /setforceinterpolate get exec"
-*End
-*?TKImageSmoothing: "
-  save
-  /RRCustomProcs /ProcSet findresource /currentforceinterpolate get exec
-  {(True)}{(False)} ifelse
-  = flush restore"
-*End
-*CloseUI: *TKImageSmoothing
-
-*% Font Information =====================
-*DefaultFont: Courier
-*Font Courier: Standard "(002.003)" Standard ROM
-*Font Courier-Bold: Standard "(002.003)" Standard ROM
-*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
-*Font Courier-Oblique: Standard "(002.003)" Standard ROM
-*Font Helvetica: Standard "(001.006)" Standard ROM
-*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
-*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
-*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
-*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
-*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
-*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
-*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
-*Font Symbol: Special "(001.007)" Special ROM
-*Font Times-Bold: Standard "(001.007)" Standard ROM
-*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
-*Font Times-Italic: Standard "(001.007)" Standard ROM
-*Font Times-Roman: Standard "(001.007)" Standard ROM
-*?FontQuery: "
-  save
-  { count 1 gt
-    { exch dup 127 string cvs (/) print print (:) print
-     /Font resourcestatus {pop pop (Yes)} {(No)} ifelse =
-    } { exit } ifelse
-  } bind loop
-  (*) = flush restore"
-*End
-
-*?FontList: "
-   save (*) {cvn ==} 128 string /Font resourceforall
-   (*) = flush restore"
-*End
-
-*DefaultColorSep: ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi
-
-*InkName: ProcessBlack/Process Black
-*InkName: CustomColor/Custom Color
-*InkName: ProcessCyan/Process Cyan
-*InkName: ProcessMagenta/Process Magenta
-*InkName: ProcessYellow/Process Yellow
-
-*%  For 60 lpi / 300x300 dpi  ===============================
-
-*ColorSepScreenAngle ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
-*ColorSepScreenAngle CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
-*ColorSepScreenAngle ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
-*ColorSepScreenAngle ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
-*ColorSepScreenAngle ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "0.0"
-
-*ColorSepScreenFreq ProcessBlack.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
-*ColorSepScreenFreq CustomColor.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
-*ColorSepScreenFreq ProcessCyan.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
-*ColorSepScreenFreq ProcessMagenta.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
-*ColorSepScreenFreq ProcessYellow.60lpi.300x300dpi/60 lpi / 300x300 dpi: "60"
-
-*% The byte count of this file should be exactly 014657 or 015208
-*% depending on the filesystem it resides in.
-*% end of PPD file for Tektronix Phaser 350
-