diff options
Diffstat (limited to 'psprint_config/configuration/ppds/LOPTRAN.PS')
| -rw-r--r-- | psprint_config/configuration/ppds/LOPTRAN.PS | 1001 |
1 files changed, 1001 insertions, 0 deletions
diff --git a/psprint_config/configuration/ppds/LOPTRAN.PS b/psprint_config/configuration/ppds/LOPTRAN.PS new file mode 100644 index 000000000000..457246fe3da2 --- /dev/null +++ b/psprint_config/configuration/ppds/LOPTRAN.PS @@ -0,0 +1,1001 @@ +*PPD-Adobe: "4.2"
+*% Adobe PostScript(R) Printer Description File
+*% For Lexmark Optra N Laser Printer
+*% Produced by Lexmark International, Inc.
+*%
+*% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved.
+*% Permission is granted for redistribution of this file as
+*% long as this copyright notice is intact and the content
+*% of the file is not altered in any way from its original form.
+*%
+*%
+*% WARNING: If you want to edit this PPD file and use it with Aldus
+*% PageMaker, be sure to use an editor (such as DOS Edit)
+*% that does NOT add an end-of-file marker (hex 1A) when
+*% it stores the file.
+*%
+*%
+*%
+
+*FormatVersion: "4.2"
+*FileVersion: "1.1"
+*LanguageVersion: English
+*LanguageEncoding: WindowsANSI
+*PCFileName: "LOPTRAN.PPD"
+*Product: "(Lexmark Optra N Laser Printer)"
+*PSVersion: ""
+*ModelName: "Lexmark Optra N Laser Printer"
+*ShortNickName: "Lexmark Optra N PS"
+*NickName: "Lexmark Optra N PS"
+
+*% === Options and Constraints ============
+
+*OpenGroup: InstallableOptions/Options Installed
+*OpenUI *Option1/Paper Input Drawer - Option: Boolean
+*DefaultOption1: False
+*Option1 True/Installed: ""
+*Option1 False/Not Installed: ""
+*CloseUI: *Option1
+
+*OpenUI *Option2/Envelope Feeder - Option: Boolean
+*DefaultOption2: False
+*Option2 True/Installed: ""
+*Option2 False/Not Installed: ""
+*CloseUI: *Option2
+
+*OpenUI *Option3/Finisher - Option: Boolean
+*DefaultOption3: False
+*Option3 True/Installed: ""
+*Option3 False/Not Installed: ""
+*CloseUI: *Option3
+
+*OpenUI *Option4/Duplex - Option: Boolean
+*DefaultOption4: False
+*Option4 True/Installed: ""
+*Option4 False/Not Installed: ""
+*CloseUI: *Option4
+
+*OpenUI *Option5/Flash Memory Card - Option: Boolean
+*DefaultOption5: False
+*Option5 False/Not Installed: ""
+*Option5 True/Installed: ""
+*CloseUI: *Option5
+
+*OpenUI *Option6/Printer Hard Disk - Option: Boolean
+*DefaultOption6: False
+*Option6 False/Not Installed: ""
+*Option6 True/Installed: ""
+*CloseUI: *Option6
+
+*OpenUI *InstalledMemory/Printer Memory - Option: PickOne
+*DefaultInstalledMemory: 4Meg
+*InstalledMemory 4Meg/4 MB Printer Memory: ""
+*InstalledMemory 6Meg/6 MB Printer Memory: ""
+*InstalledMemory 8Meg/8 MB Printer Memory: ""
+*InstalledMemory 10Meg/10 MB Printer Memory: ""
+*InstalledMemory 12Meg/12 MB Printer Memory: ""
+*InstalledMemory 16Meg/16 MB Printer Memory: ""
+*InstalledMemory 18Meg/18 MB Printer Memory: ""
+*InstalledMemory 20Meg/20 MB Printer Memory: ""
+*InstalledMemory 24Meg/24 MB Printer Memory: ""
+*InstalledMemory 32Meg/32 or more MB Printer Memory: ""
+*CloseUI: *InstalledMemory
+
+*CloseGroup: InstallableOptions
+*% === User Constraints ============
+
+*% If Input Deck is not installed then do not show as input source
+*UIConstraints: *Option1 False *InputSlot Tray3
+*UIConstraints: *Option1 False *TraySwitch Tray23
+*UIConstraints: *Option1 False *TraySwitch Tray123
+
+*% If Envelope feeder is not installed then do not show as input source
+*UIConstraints: *Option2 False *InputSlot Feeder
+
+*UIConstraints: *Option3 False *StapleLocation Staple1
+*UIConstraints: *Option3 False *StapleLocation Staple2
+*UIConstraints: *OutputBin Bin0 *StapleLocation Staple1
+*UIConstraints: *OutputBin Bin0 *StapleLocation Staple2
+
+*% If Duplex is not installed then inhibit:
+*UIConstraints: *Option4 False *Duplex
+
+*% If Flash is not installed then inhibit:
+*UIConstraints: *Option5 None *Flash
+
+*% If HardDisk is not installed then inhibit:
+*UIConstraints: *Option6 False *HardDisk
+
+*% If the paper source is Tray1 exclude the following paper sizes:
+*UIConstraints: *InputSlot Tray1 *PageSize B5
+*UIConstraints: *InputSlot Tray1 *PageSize Executive
+*UIConstraints: *InputSlot Tray1 *PageSize A5
+*UIConstraints: *InputSlot Tray1 *PageSize Monarch
+*UIConstraints: *InputSlot Tray1 *PageSize C4
+*UIConstraints: *InputSlot Tray1 *PageSize Comm10
+*UIConstraints: *InputSlot Tray1 *PageSize DL
+*UIConstraints: *InputSlot Tray1 *PageSize C5
+*UIConstraints: *InputSlot Tray1 *PageSize ISOB5
+*UIConstraints: *InputSlot Tray1 *PageSize C3
+*UIConstraints: *InputSlot Tray1 *PageSize Tabloid
+*UIConstraints: *InputSlot Tray1 *PageSize Universal
+*UIConstraints: *InputSlot Tray1 *PageSize A3
+
+*% If the paper source is Tray2 exclude the following paper sizes:
+*UIConstraints: *InputSlot Tray2 *PageSize B5
+*UIConstraints: *InputSlot Tray2 *PageSize Executive
+*UIConstraints: *InputSlot Tray2 *PageSize A5
+*UIConstraints: *InputSlot Tray2 *PageSize Monarch
+*UIConstraints: *InputSlot Tray2 *PageSize C4
+*UIConstraints: *InputSlot Tray2 *PageSize Comm10
+*UIConstraints: *InputSlot Tray2 *PageSize DL
+*UIConstraints: *InputSlot Tray2 *PageSize C5
+*UIConstraints: *InputSlot Tray2 *PageSize ISOB5
+*UIConstraints: *InputSlot Tray2 *PageSize C3
+*UIConstraints: *InputSlot Tray2 *PageSize Universal
+
+*% If the paper source is Tray3 exclude the following paper sizes:
+*UIConstraints: *InputSlot Tray3 *PageSize B5
+*UIConstraints: *InputSlot Tray3 *PageSize Executive
+*UIConstraints: *InputSlot Tray3 *PageSize A5
+*UIConstraints: *InputSlot Tray3 *PageSize Monarch
+*UIConstraints: *InputSlot Tray3 *PageSize C4
+*UIConstraints: *InputSlot Tray3 *PageSize Comm10
+*UIConstraints: *InputSlot Tray3 *PageSize DL
+*UIConstraints: *InputSlot Tray3 *PageSize C5
+*UIConstraints: *InputSlot Tray3 *PageSize ISOB5
+*UIConstraints: *InputSlot Tray3 *PageSize C3
+*UIConstraints: *InputSlot Tray3 *PageSize Universal
+
+*% If the paper source is Envelope Feeder exclude the following paper sizes:
+*UIConstraints: *InputSlot Feeder *PageSize Letter
+*UIConstraints: *InputSlot Feeder *PageSize Legal
+*UIConstraints: *InputSlot Feeder *PageSize Executive
+*UIConstraints: *InputSlot Feeder *PageSize A4
+*UIConstraints: *InputSlot Feeder *PageSize A5
+*UIConstraints: *InputSlot Feeder *PageSize B4
+*UIConstraints: *InputSlot Feeder *PageSize B5
+*UIConstraints: *InputSlot Feeder *PageSize A3
+*UIConstraints: *InputSlot Feeder *PageSize Tabloid
+*UIConstraints: *InputSlot Feeder *PageSize Universal
+*UIConstraints: *InputSlot Feeder *PageSize C3
+
+*% If the paper source is Manual Envelope exclude the following paper sizes:
+*UIConstraints: *InputSlot ManualEnvelope *PageSize Letter
+*UIConstraints: *InputSlot ManualEnvelope *PageSize Legal
+*UIConstraints: *InputSlot ManualEnvelope *PageSize Executive
+*UIConstraints: *InputSlot ManualEnvelope *PageSize A4
+*UIConstraints: *InputSlot ManualEnvelope *PageSize A5
+*UIConstraints: *InputSlot ManualEnvelope *PageSize B4
+*UIConstraints: *InputSlot ManualEnvelope *PageSize B5
+*UIConstraints: *InputSlot ManualEnvelope *PageSize A3
+*UIConstraints: *InputSlot ManualEnvelope *PageSize Tabloid
+*UIConstraints: *InputSlot ManualEnvelope *PageSize Universal
+
+*% If the paper source in Manual Paper then exclude Envelopes
+*UIConstraints: *InputSlot ManualPaper *PageSize Monarch
+*UIConstraints: *InputSlot ManualPaper *PageSize C4
+*UIConstraints: *InputSlot ManualPaper *PageSize Comm10
+*UIConstraints: *InputSlot ManualPaper *PageSize DL
+*UIConstraints: *InputSlot ManualPaper *PageSize C5
+*UIConstraints: *InputSlot ManualPaper *PageSize ISOB5
+*UIConstraints: *InputSlot ManualPaper *PageSize C3
+
+*% If Resolution is 1200 dpi inhibit text smoothing
+*UIConstraints: *Resolution 1200dpi *Smoothing
+
+*% If resolution is other than 600 dpi inhibit PictureGrade and IET
+*UIConstraints: *Resolution 300dpi *JCLPictureGrade On
+*UIConstraints: *Resolution 300dpi *JCLPictureGrade Off
+*UIConstraints: *Resolution 1200dpi *JCLPictureGrade On
+*UIConstraints: *Resolution 1200dpi *JCLPictureGrade Off
+
+*UIConstraints: *Resolution 300dpi *ImageEnhance
+*UIConstraints: *Resolution 1200dpi *ImageEnhance
+
+*UIConstraints: *ImageEnhance On *JCLPictureGrade On
+*UIConstraints: *ImageEnhance On *JCLPictureGrade Off
+*UIConstraints: *JCLPictureGrade On *ImageEnhance
+
+*UIConstraints: *ImageEnhance On *Smoothing
+*UIConstraints: *Smoothing True *ImageEnhance
+
+*% === Basic Capabilities ============
+
+*LanguageLevel: "2"
+*Protocols: PJL TBCP
+*ColorDevice: False
+*DefaultColorSpace: Gray
+*TTRasterizer: Type42
+*FileSystem: True
+*Throughput: "24"
+
+*FreeVM: "910000"
+*VMOption 4Meg: "910000"
+*VMOption 6Meg: "1034000"
+*VMOption 8Meg: "1290000"
+*VMOption 10Meg: "1290000"
+*VMOption 12Meg: "1546000"
+*VMOption 16Meg: "2058000"
+*VMOption 18Meg: "2058000"
+*VMOption 20Meg: "2058000"
+*VMOption 24Meg: "2058000"
+*VMOption 32Meg: "2058000"
+*Password: "0"
+*ExitServer: "
+ count 0 eq % is the password on the stack?
+ { true }
+ { dup % potential password
+ statusdict /checkpassword get exec not
+ } ifelse
+ { % if no password or not valid
+ (WARNING : Cannot perform the exitserver command.) =
+ (Password supplied is not valid.) =
+ (Please contact the author of this software.) = flush
+ quit
+ } if
+ serverdict /exitserver get exec
+ "
+*End
+*Reset: "
+ count 0 eq % is the password on the stack?
+ { true }
+ { dup % potential password
+ statusdict /checkpassword get exec not
+ } ifelse
+ { % if no password or not valid
+ (WARNING : Cannot reset printer.) =
+ (Password supplied is not valid.) =
+ (Please contact the author of this software.) = flush
+ quit
+ } if
+ serverdict /exitserver get exec
+ systemdict /quit get exec
+ (WARNING : Printer Reset Failed.) = flush
+ "
+*End
+
+*% === Job Control Language ==
+
+*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
+*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
+*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"
+
+*JCLOpenUI *JCLPortRotation/Port Rotation: PickOne
+*DefaultJCLPortRotation: None
+*OrderDependency: 10 JCLSetup *JCLPortRotation
+*JCLPortRotation None/Printer's default: ""
+*JCLPortRotation True/On: "@PJL LPORTROTATE<0A>"
+*JCLCloseUI: *JCLPortRotation
+
+*JCLOpenUI *JCLDensity/Print Darkness: PickOne
+*DefaultJCLDensity: PrinterSetting
+*OrderDependency: 20 JCLSetup *JCLDensity
+*JCLDensity PrinterSetting/Printer's default: ""
+*JCLDensity VLIGHT/Very Light (-6): "@PJL SET LDENSITY = -6<0A>"
+*JCLDensity LIGHT/Light (-3): "@PJL SET LDENSITY = -3<0A>"
+*JCLDensity NORMAL/Normal (0): "@PJL SET LDENSITY = 0<0A>"
+*JCLDensity DARK/Dark (+3): "@PJL SET LDENSITY = +3<0A>"
+*JCLDensity VDARK/Very Dark (+6): "@PJL SET LDENSITY = +6<0A>"
+*JCLCloseUI: *JCLDensity
+
+*JCLOpenUI *JCLEconomode/Toner Saver: PickOne
+*DefaultJCLEconomode: PrinterSetting
+*OrderDependency: 10 JCLSetup *JCLEconomode
+*JCLEconomode PrinterSetting/Printer's default: ""
+*JCLEconomode True/On: "@PJL SET ECONOMODE = ON<0A>"
+*JCLEconomode False/Off: "@PJL SET ECONOMODE = OFF<0A>"
+*JCLCloseUI: *JCLEconomode
+
+*% === Resolution ============
+
+*OpenUI *Resolution/Resolution: PickOne
+*DefaultResolution: 600dpi
+*OrderDependency: 10 AnySetup *Resolution
+*Resolution 300dpi/300 dpi: "1 dict dup /HWResolution [300 300] put setpagedevice"
+*Resolution 600dpi/600 dpi: "1 dict dup /HWResolution [600 600] put setpagedevice"
+*Resolution 1200dpi/1200 Quality: "1 dict dup /HWResolution [1200 1200] put setpagedevice"
+*?Resolution: "
+ save
+ currentpagedevice /HWResolution get 0 get
+ ( ) cvs print (dpi) = flush
+ restore
+ "
+*End
+*CloseUI: *Resolution
+
+*OpenUI *Smoothing/Smoothing: Boolean
+*DefaultSmoothing: False
+*OrderDependency: 40 AnySetup *Smoothing
+*Smoothing True/On: "
+ 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 2 put put setpagedevice"
+*End
+*Smoothing False/Off: "
+ 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 0 put put setpagedevice"
+*End
+*?Smoothing: "
+ save
+ currentpagedevice /PostRenderingEnhanceDetails get /REValue get
+ dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush
+ restore
+ "
+*End
+*CloseUI: *Smoothing
+
+*OpenUI *ImageEnhance/Image Enhancement: Boolean
+*DefaultImageEnhance: False
+*OrderDependency: 40 AnySetup *ImageEnhance
+*ImageEnhance True/On: "
+ 1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 1 put put setpagedevice"
+*End
+*ImageEnhance False/Off: "
+ 1 dict dup /DeviceRenderingInfo 1 dict dup /ImageEnhancement 0 put put setpagedevice"
+*End
+*CloseUI: *ImageEnhance
+
+*JCLOpenUI *JCLPictureGrade/PictureGrade: PickOne
+*DefaultJCLPictureGrade: Printer
+*OrderDependency: 10 JCLSetup *JCLPictureGrade
+*JCLPictureGrade Printer/Printer's default:""
+*JCLPictureGrade On/On: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = ON<0A>"
+*JCLPictureGrade Off/Off: "@PJL SET LPARM:POSTSCRIPT LPICTUREGRADE = OFF<0A>"
+*JCLCloseUI: *JCLPictureGrade
+
+
+*% === Halftone Information ===============
+
+*ScreenFreq: "60.0"
+*ScreenAngle: "45.0"
+*DefaultScreenProc: Dot
+*ScreenProc Dot: "
+ {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
+ sub }{dup mul exch dup mul add 1 exch sub }ifelse }
+ "
+*End
+*ScreenProc Line: "{ pop }"
+*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
+
+*DefaultTransfer: Factory
+*Transfer Factory: "{ }"
+*Transfer Factory.Inverse: "{ 1 exch sub }"
+
+*% === Paper Handling ===================
+
+*LandscapeOrientation: Plus90
+
+*% These entries will set up the frame buffer.
+*% Usually used with AutoSelect input slot.
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+
+*OpenUI *PageSize: PickOne
+*OrderDependency: 30 AnySetup *PageSize
+*DefaultPageSize: Letter
+
+*PageSize Letter/Letter: "
+ 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Legal/Legal: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Executive/Executive: "
+ 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize A4/A4: "
+ 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize A5/A5: "
+ 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize B5/B5: "
+ 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice"
+*End
+*% Engine value used; different from 4079P; Hp 5si
+*PageSize A3/A3: "
+ 2 dict dup /PageSize [842 1191] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Tabloid/Tabloid: "
+ 2 dict dup /PageSize [792 1224] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Universal/Custom 11.7 x 17.7 in: "
+ 2 dict dup /PageSize [842 1274] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize B4/B4: "
+ 2 dict dup /PageSize [729 1032] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Monarch/Monarch Envelope: "
+ 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize C4/C9 Envelope: "
+ 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Comm10/C10 Envelope: "
+ 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize DL/DL Envelope: "
+ 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize C5/C5 Envelope: "
+ 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize ISOB5/B5 Envelope: "
+ 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize C3/Other Envelope: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*?PageSize: "
+ save
+ 17 dict
+ dup /letter (Letter) put
+ dup /legal (Legal) put
+ dup /executivepage (Executive) put
+ dup /a4 (A4) put
+ dup /a5 (A5) put
+ dup /b5 (B5) put
+ dup /a3 (A3) put
+ dup /tabloid (Tabloid) put
+ dup /oversize (Tabloid.Oversize) put
+ dup /b4 (B4) put
+ dup /3.875x7.5envelope (Monarch) put
+ dup /3.875x8.875envelope (C9) put
+ dup /4.125x9.5envelope (Comm10) put
+ dup /110x220envelope (DL) put
+ dup /162x229envelope (C5) put
+ dup /176x250envelope (Envelope.499.709) put
+ dup /otherenvelope (Envelope.612.996) put
+ statusdict /papersize get exec
+ 3 1 roll {get} stopped {(Unknown)}if
+ exch not { print (.Transverse) }if
+ = flush
+ restore
+ "
+*End
+
+
+*CloseUI: *PageSize
+
+*% These entries will set up the frame buffer.
+*% Usually used with input slots other than AutoSelect.
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+
+*OpenUI *PageRegion: PickOne
+*OrderDependency: 40 AnySetup *PageRegion
+*DefaultPageRegion: Letter
+
+*PageRegion Letter: "
+ 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Legal: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Executive: "
+ 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion A4: "
+ 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion A5: "
+ 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion B5: "
+ 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion A3: "
+ 2 dict dup /PageSize [842 1191] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Tabloid: "
+ 2 dict dup /PageSize [792 1224] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Universal: "
+ 2 dict dup /PageSize [842 1274] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion B4: "
+ 2 dict dup /PageSize [729 1032] put dup /ImagingBBox null put setpagedevice"
+*End
+
+*PageRegion Monarch: "
+ 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion C4: "
+ 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Comm10: "
+ 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion DL: "
+ 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion C5: "
+ 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion ISOB5: "
+ 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion C3: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+
+*CloseUI: *PageRegion
+
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+*DefaultImageableArea: Letter
+*ImageableArea Letter: "12 12 600 780"
+*ImageableArea Legal: "12 12 600 996"
+*ImageableArea Executive: "12 12 510 744"
+*ImageableArea A4: "7 12 585 829"
+*ImageableArea A5: "12 12 407 583"
+*ImageableArea B5: "12 12 505 716"
+*ImageableArea A3: "12 12 829 1178"
+*ImageableArea Tabloid: "12 12 780 1212"
+*ImageableArea Universal: "12 12 830 1262"
+*ImageableArea B4: "12 12 716 1020"
+*ImageableArea Monarch: "1 12 267 528"
+*ImageableArea C4: "1 12 267 626"
+*ImageableArea Comm10: "3 12 285 672"
+*ImageableArea DL: "2 12 299 611"
+*ImageableArea C5: "4 12 447 636"
+*ImageableArea ISOB5: "2 12 486 696"
+*ImageableArea C3: "12 12 600 996"
+*?ImageableArea: "
+ save
+ /cvp { cvi ( ) cvs print ( ) print } bind def
+ newpath clippath pathbbox
+ 4 -2 roll exch 2 {ceiling cvp} repeat
+ exch 2 {floor cvp} repeat flush
+ restore
+ "
+*End
+
+*% These provide the physical dimensions of the paper (by keyword)
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+
+*DefaultPaperDimension: Letter
+*PaperDimension Letter: "612 792"
+*PaperDimension Legal: "612 1008"
+*PaperDimension Executive: "522 756"
+*PaperDimension A4: "595 842"
+*PaperDimension A5: "420 595"
+*PaperDimension B5: "516 729"
+*PaperDimension A3: "842 1191"
+*PaperDimension Tabloid: "792 1224"
+*PaperDimension Universal: "842 1274"
+*PaperDimension B4: "729 1032"
+*PaperDimension Monarch: "279 540"
+*PaperDimension C4: "279 639"
+*PaperDimension Comm10: "297 684"
+*PaperDimension DL: "312 624"
+*PaperDimension C5: "459 649"
+*PaperDimension ISOB5: "499 709"
+*PaperDimension C3: "612 1008"
+
+*RequiresPageRegion All: True
+
+*% ==== Standard Input Paper Sources
+
+*OpenUI *InputSlot: PickOne
+*OrderDependency: 20 AnySetup *InputSlot
+*DefaultInputSlot: AutoSelect
+*InputSlot AutoSelect/Auto Select: "
+ 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
+*End
+*InputSlot Tray1/Upper (Tray 1): "
+ 1 dict dup /MediaPosition null put setpagedevice
+ currentpagedevice /InputAttributes get 0 get setpagedevice
+ 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
+*End
+*InputSlot Tray2/Lower (Tray 2): "
+ 1 dict dup /MediaPosition null put setpagedevice
+ currentpagedevice /InputAttributes get 1 get setpagedevice
+ 1 dict dup /InputAttributes 1 dict dup /Priority [1] put put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
+*End
+*InputSlot MultiPurpose/Multipurpose Tray: "
+ 1 dict dup /MediaPosition null put setpagedevice
+ currentpagedevice /InputAttributes get 2 get setpagedevice
+ 1 dict dup /InputAttributes 1 dict dup /Priority [2] put put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
+*End
+*% ==== Optional Input Sources ====
+
+*% If not installed select upper tray instead.
+*InputSlot Tray3/Input Drawer (Tray 3): "
+ 1 dict dup /MediaPosition null put setpagedevice
+ userdict /lms
+ currentpagedevice /InputAttributes get 3 known { 3 }{ 0 }ifelse put
+ currentpagedevice /InputAttributes get lms get setpagedevice
+ 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
+*End
+
+*% If the Envelope Feeder is not installed then do a manual Feed
+*InputSlot Feeder/Envelope Feeder: "
+ 1 dict dup /MediaPosition null put setpagedevice
+ currentpagedevice /InputAttributes get 4 known
+ { 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice
+ 1 dict dup/InputAttributes 1 dict dup /Priority [4] put put setpagedevice }
+ { 1 dict dup /ManualFeed true put setpagedevice }ifelse"
+*End
+*InputSlot ManualPaper/Manual Paper: "
+ 1 dict dup /ManualFeed true put setpagedevice
+ 1 dict dup /MediaPosition null put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
+*End
+*InputSlot ManualEnvelope/Manual Envelope: "
+ 1 dict dup /ManualFeed true put setpagedevice
+ 1 dict dup /MediaPosition null put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
+*End
+*?InputSlot: "
+ save
+ [ (Upper) (Lower) (Multipurpose) (Manual) (Manual Envelope) (Tray3) (Feeder) ]
+ statusdict /papertray get exec
+ {get exec} stopped { pop pop (Unknown) } if = flush
+ restore
+ "
+*End
+
+*CloseUI: *InputSlot
+
+*% *OpenUI *ManualFeed/Manual Paper: Boolean
+*% *OrderDependency: 15 AnySetup *ManualFeed
+*% *DefaultManualFeed: False
+*% *ManualFeed True: "1 dict dup /ManualFeed true put setpagedevice"
+*% *ManualFeed False: "1 dict dup /ManualFeed false put setpagedevice"
+*% *?ManualFeed: "
+*% save
+*% currentpagedevice /ManualFeed get {(True)}{(False)}ifelse = flush
+*% restore
+*% "
+*% *End
+*% *CloseUI: *ManualFeed
+
+
+*OpenUI *TraySwitch/Tray Linking: PickOne
+
+*OrderDependency: 50 AnySetup *TraySwitch
+*DefaultTraySwitch: Off
+*TraySwitch False/No Tray Linking: "
+1 dict dup /TraySwitch false put setpagedevice"
+*End
+*TraySwitch Tray12/Link Tray 1+2: "
+1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 1 put put setpagedevice
+1 dict dup /TraySwitch true put setpagedevice"
+*End
+*TraySwitch Tray123/Link Tray 1+2+3: "
+1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 2 put put setpagedevice
+1 dict dup /TraySwitch true put setpagedevice"
+*End
+*TraySwitch Tray23/Link Tray 2+3: "
+1 dict dup /DeviceRenderingInfo 1 dict dup /TrayLinking 3 put put setpagedevice
+1 dict dup /TraySwitch true put setpagedevice"
+*End
+*?TraySwitch: "
+ save
+ currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush
+ restore
+ "
+*End
+*CloseUI: *TraySwitch
+
+
+*DefaultOutputOrder: Normal
+*OutputOrder Normal: ""
+*OutputOrder Reverse: ""
+
+*% ==== Duplex Printing Selection ====
+
+*OpenUI *Duplex/Duplex: PickOne
+*DefaultDuplex: None
+*Duplex None/Simplex: "1 dict dup /Duplex false put setpagedevice"
+*Duplex DuplexNoTumble/Duplex - Long Edge: "
+ statusdict /duplexer get exec
+ { 2 dict dup /Duplex true put dup /Tumble false put setpagedevice }
+ { 1 dict dup /Duplex false put setpagedevice }
+ ifelse
+ "
+*End
+*Duplex DuplexTumble/Duplex - Short Edge: "
+ statusdict /duplexer get exec
+ { 2 dict dup /Duplex true put dup /Tumble true put setpagedevice }
+ { 1 dict dup /Duplex false put setpagedevice }
+ ifelse
+ "
+*End
+*?Duplex: "
+ save
+ currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush
+ restore
+ "
+*End
+*CloseUI: *Duplex
+
+*% ==== Collated Copies ====
+
+*OpenUI *LXCollate/Collate Copies: Boolean
+*DefaultLXCollate: False
+*OrderDependency: 44 AnySetup *LXCollate
+*LXCollate True/On: "1 dict dup /Collate true put setpagedevice"
+*LXCollate False/Off: "1 dict dup /Collate false put setpagedevice"
+*CloseUI: *LXCollate
+
+*% ==== Output Finisher ====
+
+*OpenUI *OutputBin/Output Bin: PickOne
+*DefaultOutputBin: Bin0
+*OrderDependency: 45 AnySetup *OutputBin
+*OutputBin Bin0/Bin 0 (Top):"
+ 1 dict dup /OutputAttributes 1 dict dup /Priority [0] put put setpagedevice"
+*End
+*OutputBin Bin1/Bin 1 (Side):"
+ 1 dict dup /OutputAttributes 1 dict dup /Priority [1] put put setpagedevice"
+*End
+
+*CloseUI: *OutputBin
+
+*OpenUI *StapleLocation/Staple: PickOne
+*DefaultStapleLocation: Off
+*OrderDependency: 170 AnySetup *StapleLocation
+*StapleLocation Off/Off: "
+ 1 dict dup /Staple 0 put setpagedevice"
+*End
+*StapleLocation Staple1/Staple 1: "
+ 2 dict dup /Staple 3 put dup /StapleDetails 2 dict dup /Type 93 put dup
+ /Number 1 put put setpagedevice"
+*End
+*StapleLocation Staple2/Staple 2: "
+ 2 dict dup /Staple 3 put dup /StapleDetails 2 dict dup /Type 93 put dup
+ /Number 2 put put setpagedevice"
+*End
+*CloseUI: *StapleLocation
+
+*CloseGroup: FinisherOptions
+
+
+
+*% === Font Information ==========================================
+
+*DefaultFont: Courier
+*Font Courier: Standard "(001.000)" Standard ROM
+*Font Courier-Bold: Standard "(001.000)" Standard ROM
+*Font Courier-Oblique: Standard "(001.000)" Standard ROM
+*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
+*Font Times-Roman: Standard "(001.000)" Standard ROM
+*Font Times-Bold: Standard "(001.000)" Standard ROM
+*Font Times-Italic: Standard "(001.000)" Standard ROM
+*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
+*Font Helvetica: Standard "(001.000)" Standard ROM
+*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
+*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
+*Font Symbol: Special "(001.000)" Standard ROM
+*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
+*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
+*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
+*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
+*Font Bookman-Demi: Standard "(001.000)" Standard ROM
+*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
+*Font Bookman-Light: Standard "(001.000)" Standard ROM
+*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
+*Font Helvetica-Light: Standard "(001.000)" Standard ROM
+*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-Black: Standard "(001.000)" Standard ROM
+*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
+*Font Palatino-Roman: Standard "(001.000)" Standard ROM
+*Font Palatino-Bold: Standard "(001.000)" Standard ROM
+*Font Palatino-Italic: Standard "(001.000)" Standard ROM
+*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
+*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
+*Font ZapfDingbats: Special "(001.000)" Special ROM
+*?FontQuery: "
+ save
+ 4 dict begin
+ /sv exch def
+ /str (fonts/ ) def
+ /st2 128 string def
+ { count 0 gt
+ { dup st2 cvs (/) print print (:) print dup FontDirectory exch known
+ {pop (Yes)}
+ { str exch st2 cvs dup length /len exch def
+ 6 exch putinterval str 0 len 6 add getinterval mark exch
+ { } st2 filenameforall counttomark 0 gt
+ { cleartomark (Yes)}{cleartomark (No)}ifelse
+ }ifelse = flush
+ }{ exit } ifelse
+ } bind loop
+ (*) = flush
+ sv
+ end
+ restore
+ "
+*End
+
+*?FontList: "
+ save
+ 2 dict begin
+ /sv exch def
+ /str 128 string def
+ FontDirectory { pop == } bind forall flush
+ /filenameforall where
+ { pop save (fonts/*)
+ { dup length 6 sub 6 exch getinterval cvn == } bind
+ str filenameforall flush restore
+ } if
+ (*) = flush
+ sv
+ end
+ restore
+ "
+*End
+
+*% Printer Messages (verbatim from printer):
+*Message: "%% exitserver: permanent state may be changed %%"
+*Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%"
+*Message: "\FontName\ not found, using Courier"
+
+*% Status (format: %% status: <one of these> %% )
+*Status: "Printer Busy"
+*Status: "Warming Up"
+*Status: "idle"
+*Status: "busy"
+*Status: "waiting"
+*Status: "initializing"
+*Status: "not ready"
+
+*% Input Sources (format: %% status: <stat>; source: <one of these> %% )
+*Source: "Serial"
+*Source: "Parallel"
+*Source: "Network"
+
+*% Printer Error (format: %% PrinterError: <one of these> %%)
+*PrinterError: "Paper Jam"
+*PrinterError: "Wrong Paper Length"
+*PrinterError: "Invalid Manual Insertion"
+*PrinterError: "Change Size in Feeder"
+*PrinterError: "Change Size in Tray 1"
+*PrinterError: "Change Size in Tray 2"
+*PrinterError: "Paper Out or Feed Failure - Feed"
+*PrinterError: "Load Manual Envelope"
+*PrinterError: "Paper Out or Feed Failure - Tray 1"
+*PrinterError: "Paper Out or Feed Failure - Tray 2"
+*PrinterError: "Load Manual Paper"
+*PrinterError: "Output Bin Full"
+*PrinterError: "Cover Open/Cartridge Not Installed"
+*PrinterError: "Insufficient Memory"
+*PrinterError: "Complex Page"
+*PrinterError: "Default Storage Error"
+*PrinterError: "Defective Font Card Installed"
+*PrinterError: "Flash Full"
+*PrinterError: "ioerror"
+*PrinterError: "Flash Error"
+*PrinterError: "Duplex Not Attached"
+*PrinterError: "Duplex Cover Open"
+*PrinterError: "Scheduled Maintenance"
+*PrinterError: "Toner Low"
+*PrinterError: "Service Error"
+
+*%DeviceAdjustMatrix: " 1 0 0 1 0 0 "
+
+*% === Color Separation Information =====================
+
+*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi
+
+*InkName: ProcessBlack/Process Black
+*InkName: CustomColor/Custom Color
+*InkName: ProcessCyan/Process Cyan
+*InkName: ProcessMagenta/Process Magenta
+*InkName: ProcessYellow/Process Yellow
+
+*% For 60 lpi / 300 dpi ===============================
+
+*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
+*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
+*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
+*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
+*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
+
+*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
+
+*% For 53 lpi / 300 dpi ===============================
+
+*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
+*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
+*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
+*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
+*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
+
+*% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) =====================
+
+*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
+*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
+*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
+*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
+*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"
+
+*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
+ {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
+ 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
+ abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
+ sub }{dup mul exch dup mul add 1 exch sub }ifelse }
+ "
+*End
+
+*% For 71 lpi / 600 dpi ===============================
+
+*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
+*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
+*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
+*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
+*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"
+
+*% For 106 lpi / 1200 dpi ===================================================
+
+*ColorSepScreenAngle ProcessBlack.106lpi.1200dpi/106 lpi / 1200 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.106lpi.1200dpi/106 lpi / 1200 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.106lpi.1200dpi/106 lpi / 1200 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.106lpi.1200dpi/106 lpi / 1200 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.106lpi.1200dpi/106 lpi / 1200 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.106lpi.1200dpi/106 lpi / 1200 dpi: "106.066"
+*ColorSepScreenFreq CustomColor.106lpi.1200dpi/106 lpi / 1200 dpi: "106.066"
+*ColorSepScreenFreq ProcessCyan.106lpi.1200dpi/106 lpi / 1200 dpi: "94.8683"
+*ColorSepScreenFreq ProcessMagenta.106lpi.1200dpi/106 lpi / 1200 dpi: "94.8683"
+*ColorSepScreenFreq ProcessYellow.106lpi.1200dpi/106 lpi / 1200 dpi: "100.0"
+
+*% For 116 lpi / 1200 dpi ===================================================
+
+*ColorSepScreenAngle ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"
+*ColorSepScreenFreq CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"
+*ColorSepScreenFreq ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"
+*ColorSepScreenFreq ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"
+*ColorSepScreenFreq ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "100.0"
+
+*% End of PPD file for Lexmark Optra Laser Printer
\ No newline at end of file |