1 files changed, 0 insertions, 546 deletions
diff --git a/psprint_config/configuration/ppds/LOPTRAC.PS b/psprint_config/configuration/ppds/LOPTRAC.PS
deleted file mode 100644
index c6a83c584169..000000000000
--- a/psprint_config/configuration/ppds/LOPTRAC.PS
+++ /dev/null
@@ -1,546 +0,0 @@
-*PPD-Adobe: "4.1"
-*% Adobe PostScript(R) Printer Description File
-*% For Lexmark Optra C LaserPrinter
-*% Produced by Lexmark International, Inc.
-*%
-*% Copyright (c) 1993-1998 Lexmark International Inc.  All Rights Reserved.
-*% Permission is granted for redistribution of this file as
-*% long as this copyright notice is intact and the content
-*% of the file is not altered in any way from its original form.
-*%
-*%
-*% WARNING:  If you want to edit this PPD file and use it with Aldus
-*%           PageMaker, be sure to use an editor (such as DOS Edit)
-*%           that does NOT add an end-of-file marker (hex 1A) when
-*%           it stores the file.
-*%
-*%
-
-*FormatVersion: "4.1"
-*FileVersion: "1.1"
-*LanguageVersion: English
-*PCFileName: "LOPTRAC.PPD"
-*Product: "(Lexmark Optra C)"
-*PSVersion: "(2014)"
-*ModelName: "Lexmark Optra C"
-*ShortNickName: "Lexmark Optra C PS"
-*NickName: "Lexmark Optra C PS"
-
-*% === Options and Constraints ============
-
-*OpenGroup: InstallableOptions/Options Installed
-
-*OpenUI *Option1/Lower Tray - Option: Boolean
-*DefaultOption1: False
-*Option1 True/Installed: ""
-*Option1 False/Not Installed: ""
-*CloseUI: *Option1
-
-*OpenUI *Option2/Flash Memory Card - Option: Boolean
-*DefaultOption2: False
-*Option2 True/Installed: ""
-*Option2 False/Not Installed: ""
-*CloseUI: *Option2
-
-*OpenUI *Option3/Printer Hard Disk - Option: Boolean
-*DefaultOption3: False
-*Option3 False/Not Installed: ""
-*Option3 True/Installed: ""
-*CloseUI: *Option3
-
-*OpenUI *Option4/Printer Memory - Option: PickOne
-*DefaultOption4: 8Meg
-*Option4 2Meg/2 MB Printer Memory: ""
-*Option4 4Meg/4 MB Printer Memory: ""
-*Option4 6Meg/6 MB Printer Memory: ""
-*Option4 8Meg/8 MB Printer Memory: ""
-*Option4 10Meg/10 MB Printer Memory: ""
-*Option4 12Meg/12 MB Printer Memory: ""
-*Option4 16Meg/16 MB Printer Memory: ""
-*Option4 18Meg/18 MB Printer Memory: ""
-*Option4 20Meg/20 MB Printer Memory: ""
-*Option4 24Meg/24 MB Printer Memory: ""
-*Option4 32Meg/32 or more MB Printer Memory: ""
-*CloseUI: *Option4
-
-*CloseGroup: InstallableOptions
-
-*UIConstraints: *Option1 False *InputSlot Lower
-*UIConstraints: *Option1 False *TraySwitch True
-
-*% === Basic Capabilities ============
-
-*ColorDevice: True
-
-*LanguageLevel: "2"
-*Protocols: PJL
-*TTRasterizer: Type42
-*FreeVM:            "1290000"
-*VMOption 2Meg:     "376000"
-*VMOption 4Meg:     "728000"
-*VMOption 6Meg:     "828000"
-*VMOption 8Meg:     "1290000"
-*VMOption 10Meg:    "1290000"
-*VMOption 12Meg:    "1546000"
-*VMOption 16Meg:    "2058000"
-*VMOption 18Meg:    "2058000"
-*VMOption 20Meg:    "2058000"
-*VMOption 24Meg:    "2058000"
-*VMOption 32Meg:    "2058000"
-*ColorDevice: True
-*DefaultColorSpace: CMYK
-*Throughput: "3"
-*Password: "0"
-*ExitServer: "
- count 0 eq   % is the password on the stack?
- { true }
- { dup        % potential password
-   statusdict /checkpassword get exec not
- } ifelse
- {  %  if no password or not valid
-   (WARNING : Cannot perform the exitserver command.) =
-   (Password supplied is not valid.) =
-   (Please contact the author of this software.) = flush
-   quit
- } if
- serverdict /exitserver get exec
- "
-*End
-*Reset: "
- count 0 eq  % is the password on the stack?
- { true }
- { dup      % potential password
-   statusdict /checkpassword get exec not
- } ifelse
- {  %  if no password or not valid
-   (WARNING : Cannot reset printer.) =
-   (Password supplied is not valid.) =
-   (Please contact the author of this software.) = flush
-   quit
- } if
- serverdict /exitserver get exec
- systemdict /quit get exec
- (WARNING : Printer Reset Failed.) = flush
- "
-*End
-
-*% === Job Control Language ==
-
-*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
-*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
-*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"
-
-*JCLOpenUI *JCLPortRotation/Port Rotation: PickOne
-*DefaultJCLPortRotation: None
-*OrderDependency: 10 JCLSetup  *JCLPortRotation
-*JCLPortRotation None/Printer Setting: ""
-*JCLPortRotation True/On: "@PJL LPORTROTATE<0A>"
-*JCLCloseUI: *JCLPortRotation
-
-*% === Resolution ============
-
-*OpenUI *Resolution/Resolution:  PickOne
-*DefaultResolution: 600dpi
-*OrderDependency: 10 AnySetup *Resolution
-*Resolution 600dpi/600 dpi: ""
-*?Resolution: "
- save
- currentpagedevice /HWResolution get 0 get
- (     ) cvs print (dpi) = flush
- restore
- "
-*End
-*CloseUI: *Resolution
-
-*% === Halftone Information ===============
-
-*ScreenFreq: "53.0"
-*ScreenAngle: "45.0"
-*DefaultScreenProc: Dot
-*ScreenProc Dot: "
- {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
- sub }{dup mul exch dup mul add 1 exch sub }ifelse }
- "
-*End
-*ScreenProc Line: "{ pop }"
-*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
-
-*DefaultTransfer: Factory
-*Transfer Factory: "{ }"
-*Transfer Factory.Inverse: "{ 1 exch sub }"
-
-*OpenUI *ColorCorrection/Color Correction: PickOne
-*OrderDependency: 10 AnySetup *ColorCorrection
-*DefaultColorCorrection: Off
-*ColorCorrection False/Off: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection null put put setpagedevice"
-*ColorCorrection Display/Display: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /Display put put setpagedevice"
-*ColorCorrection Vivid/Vivid: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /Vivid put put setpagedevice"
-*ColorCorrection SWOP/SWOP: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /SWOP put put setpagedevice"
-*?ColorCorrection: "
- save statusdict begin
- [(Off) (Display) (Vivid) (SWOP)]
- colorcorrection 1 sub get = flush
- end
- restore"
-*End
-*CloseUI: *ColorCorrection
-
-*OpenUI *ColorRegistration/Color Registration: PickOne
-*OrderDependency: 10 AnySetup *ColorRegistration
-*DefaultColorRegistration: 4Cycle
-*ColorRegistration 4Cycle/High Speed: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorRegistration 0 put put setpagedevice"
-*ColorRegistration 5Cycle/High Quality: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorRegistration 1 put put setpagedevice"
-*?ColorRegistration: "
- save statusdict begin
- [(4Cycle) (5Cycle)]
- colorregistration 1 sub get = flush
- end
- restore"
-*End
-*CloseUI: *ColorRegistration
-
-*OpenUI *FinishQuality/Finish Quality: PickOne
-*OrderDependency: 10 AnySetup *FinishQuality
-*DefaultFinishQuality: Medium
-*FinishQuality Medium/Medium Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 0 put put setpagedevice"
-*FinishQuality High/High Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 1 put put setpagedevice"
-*FinishQuality Low/Low Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 2 put put setpagedevice"
-*?FinishQuality: "
- save statusdict begin
- [(medium) (high) (low)] finishquality get = flush
- end
- restore"
-*End
-*CloseUI: *FinishQuality
-
-*OpenUI *Screening/Screening: PickOne
-*OrderDependency: 10 AnySetup *Screening
-*DefaultScreening: ColorGrade
-*Screening ColorGrade/ColorGrade: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /ColorGrade put put setpagedevice"
-*Screening Contone/Contone: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /Contone put put setpagedevice"
-*Screening Stochastic/Stochastic: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /Stochastic put put setpagedevice"
-*?Screening: "
- save statusdict begin
- [(ColorGrade) (Contone) (Stochastic)] screening 1 sub get = flush
- end
- restore"
-*End
-*CloseUI: *Screening
-
-*% === Paper Handling ===================
-
-*LandscapeOrientation: Plus90
-
-*% These entries will set up the frame buffer.
-*% Usually used with AutoSelect input slot.
-*OpenUI *PageSize:  PickOne
-*OrderDependency: 30 AnySetup *PageSize
-*DefaultPageSize: Letter
-*PageSize Letter/Letter: "
- 2 dict dup /PageSize [612 792]  put dup /ImagingBBox null put setpagedevice"
-*End
-*PageSize Legal/Legal: "
- 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
-*End
-*PageSize A4/A4: "
- 2 dict dup /PageSize [595 842]  put dup /ImagingBBox null put setpagedevice"
-*End
-*PageSize B5/B5: "
- 2 dict dup /PageSize [516 729]  put dup /ImagingBBox null put setpagedevice"
-*End
-*?PageSize: "
- save
- 4 dict
-   dup /letter (Letter) put
-   dup /legal (Legal) put
-   dup /a4 (A4) put
-   dup /b5 (B5) put
- statusdict /papersize get exec
- 3 1 roll  {get} stopped {(Unknown)}if
- exch  not { print (.Transverse) }if
- = flush
- restore
- "
-*End
-*CloseUI: *PageSize
-
-*% These entries will set up the frame buffer.
-*% Usually used with input slots other than AutoSelect.
-*OpenUI *PageRegion:  PickOne
-*OrderDependency: 40 AnySetup *PageRegion
-*DefaultPageRegion: Letter
-*PageRegion Letter/Letter: "
- 2 dict dup /PageSize [612 792]  put dup /ImagingBBox null put setpagedevice"
-*End
-*PageRegion Legal/Legal: "
- 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
-*End
-*PageRegion A4/A4: "
- 2 dict dup /PageSize [595 842]  put dup /ImagingBBox null put setpagedevice"
-*End
-*PageRegion B5/B5: "
- 2 dict dup /PageSize [516 729]  put dup /ImagingBBox null put setpagedevice"
-*End
-*CloseUI: *PageRegion
-
-*DefaultImageableArea: Letter
-*ImageableArea Letter:    "8 14 602 763"
-*ImageableArea Legal:     "8 14 602 979"
-*ImageableArea A4:        "8 14 586 813"
-*ImageableArea B5:        "8 14 506 699"
-*?ImageableArea: "
- save
- /cvp { cvi (            ) cvs print ( ) print } bind def
- newpath clippath pathbbox
- 4 -2 roll exch 2 {ceiling cvp} repeat
- exch 2 {floor cvp} repeat flush
- restore
- "
-*End
-
-*% These provide the physical dimensions of the paper (by keyword)
-*DefaultPaperDimension: Letter
-*PaperDimension Letter:    "612 792"
-*PaperDimension Legal:     "612 1008"
-*PaperDimension A4:        "595 842"
-*PaperDimension B5:        "516 729"
-
-*RequiresPageRegion All: True
-*OpenUI *InputSlot:  PickOne
-*OrderDependency: 20 AnySetup *InputSlot
-*DefaultInputSlot: AutoSelect
-*InputSlot AutoSelect/Auto Select: "
- 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
-*End
-*InputSlot Upper/Upper Tray: "
- 1 dict dup /MediaPosition null put setpagedevice
- currentpagedevice /InputAttributes get 0 get setpagedevice
- 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice
- 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
-*End
-*InputSlot Lower/Lower Tray: "
- 1 dict dup /MediaPosition null put setpagedevice
- userdict /lms
- currentpagedevice /InputAttributes get 1 known { 1 }{ 0 }ifelse put
- currentpagedevice /InputAttributes get lms get setpagedevice
- 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice
- 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
-*End
-*InputSlot Feeder/Multipurpose Feeder: "
- 1 dict dup /MediaPosition null put setpagedevice
- currentpagedevice /InputAttributes get 2 get setpagedevice
- 1 dict dup /InputAttributes 1 dict dup /Priority [2] put put setpagedevice
- 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
-*End
-*?InputSlot: "
- save
- [ (Upper) (Lower) (Feeder) ]
- statusdict /papertray get exec {get exec} stopped { pop pop (Unknown) }
- if = flush
- restore
- "
-*End
-*CloseUI: *InputSlot
-
-*OpenUI *TraySwitch/Tray Linking: Boolean
-*OrderDependency: 50 AnySetup *TraySwitch
-*DefaultTraySwitch: False
-*TraySwitch True/On:  "1 dict dup /TraySwitch true  put setpagedevice"
-*TraySwitch False/Off: "1 dict dup /TraySwitch false put setpagedevice"
-*?TraySwitch: "
- save
- currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush
- restore
- "
-*End
-*CloseUI: *TraySwitch
-
-*DefaultOutputOrder: Normal
-*OutputOrder Normal: ""
-*OutputOrder Reverse: ""
-
-*OpenUI *LXCollate/Collate Copies: Boolean
-*DefaultLXCollate: False
-*OrderDependency: 44 AnySetup *LXCollate
-*LXCollate True/On: "1 dict dup /Collate true put setpagedevice"
-*LXCollate False/Off: "1 dict dup /Collate false put setpagedevice"
-*CloseUI: *LXCollate
-
-*% === Font Information ==========================================
-
-*DefaultFont: Courier
-*Font Courier: Standard "(001.000)" Standard ROM
-*Font Courier-Bold: Standard "(001.000)" Standard ROM
-*Font Courier-Oblique: Standard "(001.000)" Standard ROM
-*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
-*Font Times-Roman: Standard "(001.000)" Standard ROM
-*Font Times-Bold: Standard "(001.000)" Standard ROM
-*Font Times-Italic: Standard "(001.000)" Standard ROM
-*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
-*Font Helvetica: Standard "(001.000)" Standard ROM
-*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
-*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
-*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
-*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
-*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
-*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
-*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
-*Font Symbol: Special "(001.000)" Standard ROM
-*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
-*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
-*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
-*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
-*Font Bookman-Demi: Standard "(001.000)" Standard ROM
-*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
-*Font Bookman-Light: Standard "(001.000)" Standard ROM
-*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
-*Font Helvetica-Light: Standard "(001.000)" Standard ROM
-*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
-*Font Helvetica-Black: Standard "(001.000)" Standard ROM
-*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
-*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
-*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
-*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
-*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
-*Font Palatino-Roman: Standard "(001.000)" Standard ROM
-*Font Palatino-Bold: Standard "(001.000)" Standard ROM
-*Font Palatino-Italic: Standard "(001.000)" Standard ROM
-*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
-*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
-*Font ZapfDingbats: Special "(001.000)" Special ROM
-*?FontQuery: "
- save
- 4 dict begin
-  /sv exch def
-  /str (fonts/                              ) def
-  /st2 128 string def
-  { count 0 gt
-   { dup st2 cvs (/) print print (:) print dup FontDirectory exch known
-    {pop (Yes)}
-    { str exch st2 cvs dup length /len exch def
-     6 exch putinterval str 0 len 6 add getinterval mark exch
-     { } st2 filenameforall counttomark 0 gt
-     { cleartomark (Yes)}{cleartomark (No)}ifelse
-    }ifelse = flush
-   }{ exit } ifelse
-  } bind loop
-  (*) = flush
-  sv
- end
- restore
- "
-*End
-
-*?FontList: "
- save
- 2 dict begin
-  /sv exch def
-  /str 128 string def
-  FontDirectory { pop == } bind forall flush
-  /filenameforall where
-  { pop save (fonts/*)
-   { dup length 6 sub 6 exch getinterval cvn == } bind
-   str filenameforall flush restore
-  } if
-  (*) = flush
-  sv
- end
- restore
- "
-*End
-
-*% Printer Messages (verbatim from printer):
-*Message: "%%  exitserver: permanent state may be changed  %%"
-*Message: "%%  Flushing: rest of job (to end-of-file) will be ignored  %%"
-*Message: "\FontName\ not found, using Courier"
-
-*% Status (format: %%  status: <one of these> %% )
-*Status: "Printer Busy"
-*Status: "Warming Up"
-*Status: "idle"
-*Status: "busy"
-*Status: "waiting"
-*Status: "initializing"
-*Status: "not ready"
-
-*% Input Sources (format: %%  status: <stat>; source: <one of these>  %% )
-*Source: "Serial"
-*Source: "Parallel"
-*Source: "Network"
-
-*% Printer Error (format: %%  PrinterError: <one of these>  %%)
-*PrinterError: "Paper Jam"
-*PrinterError: "Wrong Paper Length"
-*PrinterError: "Invalid Manual Insertion"
-*PrinterError: "Change Size in Feeder"
-*PrinterError: "Change Size in Tray 1"
-*PrinterError: "Change Size in Tray 2"
-*PrinterError: "Paper Out or Feed Failure - Feed"
-*PrinterError: "Load Manual Envelope"
-*PrinterError: "Paper Out or Feed Failure - Tray 1"
-*PrinterError: "Paper Out or Feed Failure - Tray 2"
-*PrinterError: "Load Manual Paper"
-*PrinterError: "Output Bin Full"
-*PrinterError: "Cover Open/Cartridge Not Installed"
-*PrinterError: "Insufficient Memory"
-*PrinterError: "Complex Page"
-*PrinterError: "Default Storage Error"
-*PrinterError: "Defective Font Card Installed"
-*PrinterError: "Flash Full"
-*PrinterError: "ioerror"
-*PrinterError: "Flash Error"
-*PrinterError: "Duplex Not Attached"
-*PrinterError: "Duplex Cover Open"
-*PrinterError: "Scheduled Maintenance"
-*PrinterError: "Toner Low"
-*PrinterError: "Service Error"
-
-*%DeviceAdjustMatrix: " 1 0 0 1 0 0 "
-
-*% === Color Separation Information =====================
-
-*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi
-
-*InkName: ProcessBlack/Process Black
-*InkName: CustomColor/Custom Color
-*InkName: ProcessCyan/Process Cyan
-*InkName: ProcessMagenta/Process Magenta
-*InkName: ProcessYellow/Process Yellow
-
-*%  For 85 lpi / 600 dpi  5,5,2,6,6,2,20/3,0) =====================
-
-*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
-*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
-*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
-*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
-*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"
-
-*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
-*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
-*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
-*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
-*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"
-
-*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
- {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
- 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
- abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
- sub }{dup mul exch dup mul add 1 exch sub }ifelse }
- "
-*End
-
-*%  For 71 lpi / 600 dpi  ===============================
-
-*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
-*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
-*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
-*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
-*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"
-
-*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
-*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
-*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
-*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
-*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"
-
-*% End of PPD file for Lexmark Optra C LaserPrinter