diff options
Diffstat (limited to 'include/oox/drawingml/chart/typegroupconverter.hxx')
-rw-r--r-- | include/oox/drawingml/chart/typegroupconverter.hxx | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/include/oox/drawingml/chart/typegroupconverter.hxx b/include/oox/drawingml/chart/typegroupconverter.hxx new file mode 100644 index 000000000000..dfce05065c18 --- /dev/null +++ b/include/oox/drawingml/chart/typegroupconverter.hxx @@ -0,0 +1,198 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef OOX_DRAWINGML_CHART_TYPEGROUPCONVERTER_HXX +#define OOX_DRAWINGML_CHART_TYPEGROUPCONVERTER_HXX + +#include "oox/drawingml/chart/converterbase.hxx" + +namespace com { namespace sun { namespace star { + namespace chart2 { class XChartType; } + namespace chart2 { class XCoordinateSystem; } + namespace chart2 { class XDataSeries; } + namespace chart2 { class XDiagram; } + namespace chart2 { namespace data { class XLabeledDataSequence; } } +} } } + +namespace oox { +namespace drawingml { +namespace chart { + +// ============================================================================ + +/** Enumerates different chart types. */ +enum TypeId +{ + TYPEID_BAR, /// Vertical bar chart. + TYPEID_HORBAR, /// Horizontal bar chart. + TYPEID_LINE, /// Line chart. + TYPEID_AREA, /// Area chart. + TYPEID_STOCK, /// Stock chart. + TYPEID_RADARLINE, /// Linear radar chart. + TYPEID_RADARAREA, /// Filled radar chart. + TYPEID_PIE, /// Pie chart. + TYPEID_DOUGHNUT, /// Doughnut (ring) chart. + TYPEID_OFPIE, /// Pie-to-pie or pie-to-bar chart. + TYPEID_SCATTER, /// Scatter (XY) chart. + TYPEID_BUBBLE, /// Bubble chart. + TYPEID_SURFACE, /// Surface chart. + TYPEID_UNKNOWN /// Default for unknown chart types. +}; + +// ---------------------------------------------------------------------------- + +/** Enumerates different categories of similar chart types. */ +enum TypeCategory +{ + TYPECATEGORY_BAR, /// Bar charts (horizontal or vertical). + TYPECATEGORY_LINE, /// Line charts (line, area, stock charts). + TYPECATEGORY_RADAR, /// Radar charts (linear or filled). + TYPECATEGORY_PIE, /// Pie and donut charts. + TYPECATEGORY_SCATTER, /// Scatter and bubble charts. + TYPECATEGORY_SURFACE /// Surface charts. +}; + +// ---------------------------------------------------------------------------- + +/** Enumerates modes for varying point colors in a series. */ +enum VarPointMode +{ + VARPOINTMODE_NONE, /// No varied colors supported. + VARPOINTMODE_SINGLE, /// Only supported, if type group contains only one series. + VARPOINTMODE_MULTI /// Supported for multiple series in a chart type group. +}; + +// ============================================================================ + +/** Contains info for a chart type related to the OpenOffice.org chart module. */ +struct TypeGroupInfo +{ + TypeId meTypeId; /// Unique chart type identifier. + TypeCategory meTypeCategory; /// Category this chart type belongs to. + const sal_Char* mpcServiceName; /// Service name of the type. + VarPointMode meVarPointMode; /// Mode for varying point colors. + sal_Int32 mnDefLabelPos; /// Default data label position (API constant). + bool mbCombinable2d; /// True = types can be combined in one axes set. + bool mbSupports3d; /// True = 3D type allowed, false = only 2D type. + bool mbPolarCoordSystem; /// True = polar, false = cartesian. + bool mbSeriesIsFrame2d; /// True = 2D type series with area formatting. + bool mbSingleSeriesVis; /// True = only first series visible (e.g. pie charts). + bool mbCategoryAxis; /// True = X axis contains categories. + bool mbSwappedAxesSet; /// True = X axis and Y axis are swapped. + bool mbSupportsStacking; /// True = data points can be stacked on each other. + bool mbReverseSeries; /// True = insert unstacked series in reverse order. + bool mbTicksBetweenCateg; /// True = X axis ticks between categories. + bool mbPictureOptions; /// True = bitmaps support options from c:pictureOptions. +}; + +// ============================================================================ + +struct UpDownBarsModel; + +class UpDownBarsConverter : public ConverterBase< UpDownBarsModel > +{ +public: + explicit UpDownBarsConverter( const ConverterRoot& rParent, UpDownBarsModel& rModel ); + virtual ~UpDownBarsConverter(); + + /** Converts the OOXML up/down bars. */ + void convertFromModel( + const ::com::sun::star::uno::Reference< ::com::sun::star::chart2::XChartType >& rxChartType ); +}; + +// ============================================================================ + +struct TypeGroupModel; +struct View3DModel; + +class TypeGroupConverter : public ConverterBase< TypeGroupModel > +{ +public: + explicit TypeGroupConverter( const ConverterRoot& rParent, TypeGroupModel& rModel ); + virtual ~TypeGroupConverter(); + + /** Returns the type info struct that describes this chart type group. */ + inline const TypeGroupInfo& getTypeInfo() const { return maTypeInfo; } + + /** Returns true, if the series in this chart type group are stacked on each other (no percentage). */ + bool isStacked() const; + /** Returns true, if the series in this chart type group are stacked on each other as percentage. */ + bool isPercent() const; + /** Returns true, if the chart is three-dimensional. */ + bool is3dChart() const; + /** Returns true, if chart type supports wall and floor format in 3D mode. */ + bool isWall3dChart() const; + /** Returns true, if the series in this chart type group are ordered on the Z axis. */ + bool isDeep3dChart() const; + + /** Returns true, if this chart type supports area formatting for its series. */ + bool isSeriesFrameFormat() const; + /** Returns the object type for a series depending on the chart type. */ + ObjectType getSeriesObjectType() const; + + /** Returns true, if this chart type has to reverse its series order. */ + bool isReverseSeries() const; + /** Returns series title, if the chart type group contains only one single series. */ + OUString getSingleSeriesTitle() const; + + /** Creates a coordinate system according to the contained chart type. */ + ::com::sun::star::uno::Reference< ::com::sun::star::chart2::XCoordinateSystem > + createCoordinateSystem(); + /** Creates a labeled data sequence object for axis categories. */ + ::com::sun::star::uno::Reference< ::com::sun::star::chart2::data::XLabeledDataSequence > + createCategorySequence(); + + /** Converts the OOXML type group model into a chart2 coordinate system. */ + void convertFromModel( + const ::com::sun::star::uno::Reference< ::com::sun::star::chart2::XDiagram >& rxDiagram, + const ::com::sun::star::uno::Reference< ::com::sun::star::chart2::XCoordinateSystem >& rxCoordSystem, + sal_Int32 nAxesSetIdx, bool bSupportsVaryColorsByPoint ); + + /** Sets the passed OOXML marker style at the passed property set. */ + void convertMarker( PropertySet& rPropSet, sal_Int32 nOoxSymbol, sal_Int32 nOoxSize ) const; + /** Sets the passed OOXML line smoothing at the passed property set. */ + void convertLineSmooth( PropertySet& rPropSet, bool bOoxSmooth ) const; + /** Sets the passed OOXML bar 3D geometry at the passed property set. */ + void convertBarGeometry( PropertySet& rPropSet, sal_Int32 nOoxShape ) const; + /** Sets the passed OOXML pie rotation at the passed property set. */ + void convertPieRotation( PropertySet& rPropSet, sal_Int32 nOoxAngle ) const; + /** Sets the passed OOXML pie explosion at the passed property set. */ + void convertPieExplosion( PropertySet& rPropSet, sal_Int32 nOoxExplosion ) const; + +private: + /** Inserts the passed series into the chart type. Adds additional properties to the series. */ + void insertDataSeries( + const ::com::sun::star::uno::Reference< ::com::sun::star::chart2::XChartType >& rxChartType, + const ::com::sun::star::uno::Reference< ::com::sun::star::chart2::XDataSeries >& rxSeries, + sal_Int32 nAxesSetIdx ); + +private: + TypeGroupInfo maTypeInfo; /// Extended type info for contained chart type model. + bool mb3dChart; /// True = type is a 3D chart type. +}; + +// ============================================================================ + +} // namespace chart +} // namespace drawingml +} // namespace oox + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |