diff options
Diffstat (limited to 'include/basegfx/polygon/b2dpolygon.hxx')
| -rw-r--r-- | include/basegfx/polygon/b2dpolygon.hxx | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/include/basegfx/polygon/b2dpolygon.hxx b/include/basegfx/polygon/b2dpolygon.hxx new file mode 100644 index 000000000000..7c854fdc8a0e --- /dev/null +++ b/include/basegfx/polygon/b2dpolygon.hxx @@ -0,0 +1,230 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef _BGFX_POLYGON_B2DPOLYGON_HXX +#define _BGFX_POLYGON_B2DPOLYGON_HXX + +#include <sal/types.h> +#include <o3tl/cow_wrapper.hxx> +#include <basegfx/vector/b2enums.hxx> +#include <basegfx/range/b2drange.hxx> +#include <basegfx/basegfxdllapi.h> + +////////////////////////////////////////////////////////////////////////////// +// predeclarations +class ImplB2DPolygon; + +namespace basegfx +{ + class B2DPolygon; + class B2DPoint; + class B2DVector; + class B2DHomMatrix; + class B2DCubicBezier; +} // end of namespace basegfx + +////////////////////////////////////////////////////////////////////////////// + +namespace basegfx +{ + class BASEGFX_DLLPUBLIC B2DPolygon + { + public: + typedef o3tl::cow_wrapper< ImplB2DPolygon > ImplType; + + private: + // internal data. + ImplType mpPolygon; + + public: + /// diverse constructors + B2DPolygon(); + B2DPolygon(const B2DPolygon& rPolygon); + B2DPolygon(const B2DPolygon& rPolygon, sal_uInt32 nIndex, sal_uInt32 nCount); + ~B2DPolygon(); + + /// assignment operator + B2DPolygon& operator=(const B2DPolygon& rPolygon); + + /// unshare this polygon with all internally shared instances + void makeUnique(); + + /// compare operators + bool operator==(const B2DPolygon& rPolygon) const; + bool operator!=(const B2DPolygon& rPolygon) const; + + /// member count + sal_uInt32 count() const; + + /// Coordinate interface + basegfx::B2DPoint getB2DPoint(sal_uInt32 nIndex) const; + void setB2DPoint(sal_uInt32 nIndex, const basegfx::B2DPoint& rValue); + + /// Coordinate insert/append + void insert(sal_uInt32 nIndex, const basegfx::B2DPoint& rPoint, sal_uInt32 nCount = 1); + void append(const basegfx::B2DPoint& rPoint, sal_uInt32 nCount); + void append(const basegfx::B2DPoint& rPoint); + void reserve(sal_uInt32 nCount); + + /// Basic ControlPoint interface + basegfx::B2DPoint getPrevControlPoint(sal_uInt32 nIndex) const; + basegfx::B2DPoint getNextControlPoint(sal_uInt32 nIndex) const; + void setPrevControlPoint(sal_uInt32 nIndex, const basegfx::B2DPoint& rValue); + void setNextControlPoint(sal_uInt32 nIndex, const basegfx::B2DPoint& rValue); + void setControlPoints(sal_uInt32 nIndex, const basegfx::B2DPoint& rPrev, const basegfx::B2DPoint& rNext); + + /// ControlPoint resets + void resetPrevControlPoint(sal_uInt32 nIndex); + void resetNextControlPoint(sal_uInt32 nIndex); + void resetControlPoints(); + + /// Bezier segment append with control points. The current last polygon point is implicitly taken as start point. + void appendBezierSegment(const basegfx::B2DPoint& rNextControlPoint, const basegfx::B2DPoint& rPrevControlPoint, const basegfx::B2DPoint& rPoint); + + /// ControlPoint checks + bool areControlPointsUsed() const; + bool isPrevControlPointUsed(sal_uInt32 nIndex) const; + bool isNextControlPointUsed(sal_uInt32 nIndex) const; + B2VectorContinuity getContinuityInPoint(sal_uInt32 nIndex) const; + + /** bezier segment access + + This method also works when it is no bezier segment at all and will fill + the given B2DCubicBezier as needed. + In any case, the given B2DCubicBezier will be filled, if necessary with + the single start point (if no valid edge exists). + + @param nIndex + Index of the addressed edge's start point + + @param rTarget + The B2DCubicBezier to be filled. It's data WILL be changed. + */ + void getBezierSegment(sal_uInt32 nIndex, B2DCubicBezier& rTarget) const; + + /** Default adaptive subdivision access + + This method will return a default adapive subdivision of the polygon. + If the polygon does not contain any bezier curve segments, it will + just return itself. + + The subdivision is created on first request and buffered, so when using + this subdivision You have the guarantee for fast accesses for multiple + usages. It is intended for tooling usage for tasks which would be hard + to accomplish on bezier segments (e.g. isInEpsilonRange). + + The current default subdivision uses adaptiveSubdivideByCount with 9 + subdivisions which gives 10 edges and 11 points per segment and is + usually pretty usable for processing purposes. There is no parameter + passing here ATM but it may be changed on demand. If needed, a TYPE + and PARAMETER (both defaulted) may be added to allow for switching + between the different kinds of subdivisiond and passing them one + parameter. + + The lifetime of the buffered subdivision is based on polygon changes. + When changing the polygon, it will be flushed. It is buffered at the + refcounted implementation class, so it will survive copy by value and + combinations in PolyPolygons. + + @return + The default (and buffered) subdivision of this polygon. It may + be this polygon itself when it has no bezier segments. It is guaranteed + to have no more bezier segments + */ + B2DPolygon getDefaultAdaptiveSubdivision() const; + + /** Get the B2DRange (Rectangle dimensions) of this B2DPolygon + + A polygon may have up to three ranges: + + (a) the range of the polygon points + (b) the range of the polygon points and control points + (c) the outer range of the subdivided bezier curve + + Ranges (a) and (c) are produced by tools::getRange(); resp. this + getB2DRange(). tools::getRangeWithControlPoints handles case (b). + + To get range (c) a simple solution would be to subdivide the polygon + and use getRange() on it. Since subdivision is expensive and decreases + the polygon quality, i added this new method. It will use a + methodology suggested by HDU. First, it gets the range (a). + Then it iterates over the bezier segments and for each it + first tests if the outer range of the bezier segment is already + contained in the result range. + + The subdivision itself uses getAllExtremumPositions() to only + calculate extremum points and to expand the result accordingly. + Thus it calculates maximal four extremum points on the bezier + segment, no split is used at all. + + @return + The outer range of the bezier curve/polygon + */ + B2DRange getB2DRange() const; + + /** append other 2D polygons + + The default (nIndex ==0 && nCount == 0) will append + the whole rPoly + + @param rPoly + The source polygon + + @param nIndex + The index to the first point of rPoly to append + + @param nCount + The number of points to append from rPoly, starting + from nIndex. If zero, as much as possibel is appended + */ + void append(const B2DPolygon& rPoly, sal_uInt32 nIndex = 0, sal_uInt32 nCount = 0); + + /// remove points + void remove(sal_uInt32 nIndex, sal_uInt32 nCount = 1); + + /// clear all points + void clear(); + + /// closed state interface + bool isClosed() const; + void setClosed(bool bNew); + + /// flip polygon direction + void flip(); + + /// test if Polygon has double points + bool hasDoublePoints() const; + + /// remove double points, at the begin/end and follow-ups, too + void removeDoublePoints(); + + /// apply transformation given in matrix form + void transform(const basegfx::B2DHomMatrix& rMatrix); + }; + + // typedef for a vector of B2DPolygons + typedef ::std::vector< B2DPolygon > B2DPolygonVector; + +} // end of namespace basegfx + +////////////////////////////////////////////////////////////////////////////// + +#endif /* _BGFX_POLYGON_B2DPOLYGON_HXX */ + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |