diff options
Diffstat (limited to 'chart2/source/view/main/ShapeFactory.cxx')
-rw-r--r-- | chart2/source/view/main/ShapeFactory.cxx | 94 |
1 files changed, 47 insertions, 47 deletions
diff --git a/chart2/source/view/main/ShapeFactory.cxx b/chart2/source/view/main/ShapeFactory.cxx index d9ccc32000d6..2b4e85555dc7 100644 --- a/chart2/source/view/main/ShapeFactory.cxx +++ b/chart2/source/view/main/ShapeFactory.cxx @@ -401,12 +401,12 @@ uno::Reference<drawing::XShape> if(fDepth<0) fDepth*=-1.0; xProp->setPropertyValue( UNO_NAME_3D_EXTRUDE_DEPTH - , uno::makeAny((sal_Int32)fDepth) ); + , uno::Any((sal_Int32)fDepth) ); //PercentDiagonal sal_Int16 nPercentDiagonal = bRounded ? 3 : 0; xProp->setPropertyValue( UNO_NAME_3D_PERCENT_DIAGONAL - , uno::makeAny( nPercentDiagonal ) ); + , uno::Any( nPercentDiagonal ) ); //Polygon xProp->setPropertyValue( UNO_NAME_3D_POLYPOLYGON3D @@ -422,7 +422,7 @@ uno::Reference<drawing::XShape> , rPosition.PositionZ - (fDepth/2.0)); drawing::HomogenMatrix aHM = B3DHomMatrixToHomogenMatrix(aM); xProp->setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX - , uno::makeAny(aHM) ); + , uno::Any(aHM) ); } } catch( const uno::Exception& e ) @@ -642,7 +642,7 @@ uno::Reference<drawing::XShape> //PercentDiagonal sal_Int16 nPercentDiagonal = 5; xProp->setPropertyValue( UNO_NAME_3D_PERCENT_DIAGONAL - , uno::makeAny( nPercentDiagonal ) ); + , uno::Any( nPercentDiagonal ) ); //Polygon sal_Int32 nVerticalSegmentCount = 0; @@ -662,18 +662,18 @@ uno::Reference<drawing::XShape> aM.translate(rPosition.PositionX, rPosition.PositionY, rPosition.PositionZ); drawing::HomogenMatrix aHM = B3DHomMatrixToHomogenMatrix(aM); xProp->setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX - , uno::makeAny(aHM) ); + , uno::Any(aHM) ); } //Segments xProp->setPropertyValue( UNO_NAME_3D_HORZ_SEGS - , uno::makeAny(CHART_3DOBJECT_SEGMENTCOUNT) ); + , uno::Any(CHART_3DOBJECT_SEGMENTCOUNT) ); xProp->setPropertyValue( UNO_NAME_3D_VERT_SEGS - , uno::makeAny((sal_Int32)nVerticalSegmentCount) );//depends on point count of the used polygon + , uno::Any((sal_Int32)nVerticalSegmentCount) );//depends on point count of the used polygon //Reduced lines xProp->setPropertyValue( UNO_NAME_3D_REDUCED_LINE_GEOMETRY - , uno::makeAny(true) ); + , uno::Any(true) ); } catch( const uno::Exception& e ) { @@ -882,7 +882,7 @@ uno::Reference< drawing::XShape > , fUnitCircleStartAngleDegree*F_PI/180.0, fUnitCircleWidthAngleDegree*F_PI/180.0 , aTransformationFromUnitCircle, fAngleSubdivisionRadian ); - xProp->setPropertyValue( "PolyPolygonBezier", uno::makeAny( aCoords ) ); + xProp->setPropertyValue( "PolyPolygonBezier", uno::Any( aCoords ) ); } catch( const uno::Exception& e ) { @@ -935,36 +935,36 @@ uno::Reference< drawing::XShape > //depth xProp->setPropertyValue( UNO_NAME_3D_EXTRUDE_DEPTH - , uno::makeAny((sal_Int32)fDepth) ); + , uno::Any((sal_Int32)fDepth) ); //PercentDiagonal sal_Int16 nPercentDiagonal = 0; xProp->setPropertyValue( UNO_NAME_3D_PERCENT_DIAGONAL - , uno::makeAny( nPercentDiagonal ) ); + , uno::Any( nPercentDiagonal ) ); //Polygon drawing::PolyPolygonShape3D aPoly( BezierToPoly(aCoords) ); ShapeFactory::closePolygon( aPoly ); xProp->setPropertyValue( UNO_NAME_3D_POLYPOLYGON3D - , uno::makeAny( aPoly ) ); + , uno::Any( aPoly ) ); //DoubleSided xProp->setPropertyValue( UNO_NAME_3D_DOUBLE_SIDED - , uno::makeAny( true ) ); + , uno::Any( true ) ); //Reduced lines xProp->setPropertyValue( UNO_NAME_3D_REDUCED_LINE_GEOMETRY - , uno::makeAny( true ) ); + , uno::Any( true ) ); //TextureProjectionMode xProp->setPropertyValue( UNO_NAME_3D_TEXTURE_PROJ_Y - , uno::makeAny( drawing::TextureProjectionMode_OBJECTSPECIFIC ) ); + , uno::Any( drawing::TextureProjectionMode_OBJECTSPECIFIC ) ); //TextureProjectionMode xProp->setPropertyValue( UNO_NAME_3D_TEXTURE_PROJ_X - , uno::makeAny( drawing::TextureProjectionMode_PARALLEL ) ); + , uno::Any( drawing::TextureProjectionMode_PARALLEL ) ); xProp->setPropertyValue( UNO_NAME_3D_TEXTURE_PROJ_Y - , uno::makeAny( drawing::TextureProjectionMode_OBJECTSPECIFIC ) ); + , uno::Any( drawing::TextureProjectionMode_OBJECTSPECIFIC ) ); } catch( const uno::Exception& e ) { @@ -1013,15 +1013,15 @@ uno::Reference< drawing::XShape > //NormalsKind if(bFlatNormals) xProp->setPropertyValue( UNO_NAME_3D_NORMALS_KIND - , uno::makeAny( drawing::NormalsKind_FLAT ) ); + , uno::Any( drawing::NormalsKind_FLAT ) ); //LineOnly xProp->setPropertyValue( UNO_NAME_3D_LINEONLY - , uno::makeAny( false) ); + , uno::Any( false) ); //DoubleSided xProp->setPropertyValue( UNO_NAME_3D_DOUBLE_SIDED - , uno::makeAny(bDoubleSided) ); + , uno::Any(bDoubleSided) ); if( xSourceProp.is()) PropertyMapper::setMappedProperties( xProp, xSourceProp, rPropertyNameMap ); @@ -1060,20 +1060,20 @@ uno::Reference< drawing::XShape > { //depth xProp->setPropertyValue( UNO_NAME_3D_EXTRUDE_DEPTH - , uno::makeAny((sal_Int32)fDepth) ); + , uno::Any((sal_Int32)fDepth) ); //PercentDiagonal sal_Int16 nPercentDiagonal = 0; xProp->setPropertyValue( UNO_NAME_3D_PERCENT_DIAGONAL - , uno::makeAny( nPercentDiagonal ) ); + , uno::Any( nPercentDiagonal ) ); //Polygon xProp->setPropertyValue( UNO_NAME_3D_POLYPOLYGON3D - , uno::makeAny( rPolyPolygon ) ); + , uno::Any( rPolyPolygon ) ); //DoubleSided xProp->setPropertyValue( UNO_NAME_3D_DOUBLE_SIDED - , uno::makeAny( true) ); + , uno::Any( true) ); //the z component of the polygon is now ignored by the drawing layer, //so we need to translate the object via transformation matrix @@ -1087,7 +1087,7 @@ uno::Reference< drawing::XShape > , rPolyPolygon.SequenceZ[0][0] ); drawing::HomogenMatrix aHM = B3DHomMatrixToHomogenMatrix(aM); xProp->setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX - , uno::makeAny(aHM) ); + , uno::Any(aHM) ); } } catch( const uno::Exception& e ) @@ -1123,12 +1123,12 @@ uno::Reference< drawing::XShape > //Polygon xProp->setPropertyValue( UNO_NAME_POLYPOLYGON - , uno::makeAny( aPoints ) ); + , uno::Any( aPoints ) ); //ZOrder //an area should always be behind other shapes xProp->setPropertyValue( UNO_NAME_MISC_OBJ_ZORDER - , uno::makeAny( sal_Int32(0) ) ); + , uno::Any( sal_Int32(0) ) ); } catch( const uno::Exception& e ) { @@ -1669,15 +1669,15 @@ uno::Reference< drawing::XShape > //Polygon xProp->setPropertyValue( UNO_NAME_POLYPOLYGON - , uno::makeAny( aPoints ) ); + , uno::Any( aPoints ) ); //LineColor xProp->setPropertyValue( UNO_NAME_LINECOLOR - , uno::makeAny( nBorderColor ) ); + , uno::Any( nBorderColor ) ); //FillColor xProp->setPropertyValue( UNO_NAME_FILLCOLOR - , uno::makeAny( nFillColor ) ); + , uno::Any( nFillColor ) ); } catch( const uno::Exception& e ) { @@ -1726,7 +1726,7 @@ uno::Reference< drawing::XShape > { try { - xProp->setPropertyValue( "Graphic", uno::makeAny( xGraphic )); + xProp->setPropertyValue( "Graphic", uno::Any( xGraphic )); } catch( const uno::Exception& e ) { @@ -1799,7 +1799,7 @@ uno::Reference< drawing::XShapes > { ::basegfx::B3DHomMatrix aM; xProp->setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX - , uno::makeAny(B3DHomMatrixToHomogenMatrix(aM)) ); + , uno::Any(B3DHomMatrixToHomogenMatrix(aM)) ); } catch( const uno::Exception& e ) { @@ -1861,7 +1861,7 @@ uno::Reference< drawing::XShape > { drawing::CircleKind eKind = drawing::CircleKind_FULL; xProp->setPropertyValue( UNO_NAME_CIRCKIND - , uno::makeAny( eKind ) ); + , uno::Any( eKind ) ); } catch( const uno::Exception& e ) { @@ -1912,11 +1912,11 @@ uno::Reference< drawing::XShape > { //Polygon xProp->setPropertyValue( UNO_NAME_3D_POLYPOLYGON3D - , uno::makeAny( rPoints ) ); + , uno::Any( rPoints ) ); //LineOnly xProp->setPropertyValue( UNO_NAME_3D_LINEONLY - , uno::makeAny( true ) ); + , uno::Any( true ) ); //Transparency if(rLineProperties.Transparence.hasValue()) @@ -1937,7 +1937,7 @@ uno::Reference< drawing::XShape > if(rLineProperties.Color.hasValue()) xProp->setPropertyValue( UNO_NAME_LINECOLOR , rLineProperties.Color ); - //, uno::makeAny( sal_Int32( Color(COL_RED).GetColor()) ) ); + //, uno::Any( sal_Int32( Color(COL_RED).GetColor()) ) ); } catch( const uno::Exception& e ) { @@ -1973,7 +1973,7 @@ uno::Reference< drawing::XShape > { //Polygon xProp->setPropertyValue( UNO_NAME_POLYPOLYGON - , uno::makeAny( rPoints ) ); + , uno::Any( rPoints ) ); if(pLineProperties) { @@ -2282,14 +2282,14 @@ uno::Reference< drawing::XShape > drawing::TextHorizontalAdjust eHorizontalAdjust = drawing::TextHorizontalAdjust_CENTER; drawing::TextVerticalAdjust eVerticalAdjust = drawing::TextVerticalAdjust_CENTER; - aValueMap.insert( tPropertyNameValueMap::value_type( "TextHorizontalAdjust", uno::makeAny(eHorizontalAdjust) ) ); // drawing::TextHorizontalAdjust - aValueMap.insert( tPropertyNameValueMap::value_type( "TextVerticalAdjust", uno::makeAny(eVerticalAdjust) ) ); //drawing::TextVerticalAdjust - aValueMap.insert( tPropertyNameValueMap::value_type( "TextAutoGrowHeight", uno::makeAny(true) ) ); // sal_Bool - aValueMap.insert( tPropertyNameValueMap::value_type( "TextAutoGrowWidth", uno::makeAny(true) ) ); // sal_Bool + aValueMap.insert( tPropertyNameValueMap::value_type( "TextHorizontalAdjust", uno::Any(eHorizontalAdjust) ) ); // drawing::TextHorizontalAdjust + aValueMap.insert( tPropertyNameValueMap::value_type( "TextVerticalAdjust", uno::Any(eVerticalAdjust) ) ); //drawing::TextVerticalAdjust + aValueMap.insert( tPropertyNameValueMap::value_type( "TextAutoGrowHeight", uno::Any(true) ) ); // sal_Bool + aValueMap.insert( tPropertyNameValueMap::value_type( "TextAutoGrowWidth", uno::Any(true) ) ); // sal_Bool //set name/classified ObjectID (CID) if( !aName.isEmpty() ) - aValueMap.insert( tPropertyNameValueMap::value_type( "Name", uno::makeAny( aName ) ) ); //CID OUString + aValueMap.insert( tPropertyNameValueMap::value_type( "Name", uno::Any( aName ) ) ); //CID OUString } //set global title properties @@ -2375,10 +2375,10 @@ uno::Reference< drawing::XShape > sal_Int32 nXDistance = static_cast< sal_Int32 >( ::rtl::math::round( fFontHeight * fXFraction ) ); float fYFraction = 0.30f; sal_Int32 nYDistance = static_cast< sal_Int32 >( ::rtl::math::round( fFontHeight * fYFraction ) ); - xShapeProp->setPropertyValue( "TextLeftDistance", uno::makeAny( nXDistance ) ); - xShapeProp->setPropertyValue( "TextRightDistance", uno::makeAny( nXDistance ) ); - xShapeProp->setPropertyValue( "TextUpperDistance", uno::makeAny( nYDistance ) ); - xShapeProp->setPropertyValue( "TextLowerDistance", uno::makeAny( nYDistance ) ); + xShapeProp->setPropertyValue( "TextLeftDistance", uno::Any( nXDistance ) ); + xShapeProp->setPropertyValue( "TextRightDistance", uno::Any( nXDistance ) ); + xShapeProp->setPropertyValue( "TextUpperDistance", uno::Any( nYDistance ) ); + xShapeProp->setPropertyValue( "TextLowerDistance", uno::Any( nYDistance ) ); } sal_Int32 nXPos = rPos.X; sal_Int32 nYPos = rPos.Y; @@ -2388,7 +2388,7 @@ uno::Reference< drawing::XShape > ::basegfx::B2DHomMatrix aM; aM.rotate( -nRotation*F_PI/180.0 );//#i78696#->#i80521# aM.translate( nXPos, nYPos ); - xShapeProp->setPropertyValue( "Transformation", uno::makeAny( B2DHomMatrixToHomogenMatrix3(aM) ) ); + xShapeProp->setPropertyValue( "Transformation", uno::Any( B2DHomMatrixToHomogenMatrix3(aM) ) ); } catch( const uno::Exception& e ) { |