Remove SvtInternalOptions

* only Get/SetCurrentTempURL were used, but only for compatibility reasons,
to remove old temporary directories (before 2001). Those should be gone
today.
* MailUIEnabled was false in the xcu file.
* SID_MAIL_SENDDOC* are handled some lines further.

Change-Id: I482719b0de9df0a77c2fef0bf25ae1fb68926375
Reviewed-on: https://gerrit.libreoffice.org/3180
Reviewed-by: Miklos Vajna <vmiklos@suse.cz>
Tested-by: Miklos Vajna <vmiklos@suse.cz>

1 files changed, 0 insertions, 363 deletions

diff --git a/unotools/source/config/internaloptions.cxx b/unotools/source/config/internaloptions.cxx
deleted file mode 100644
index faa8252447a4..000000000000
--- a/unotools/source/config/internaloptions.cxx
+++ /dev/null
@@ -1,363 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
-/*
- * This file is part of the LibreOffice project.
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- *
- * This file incorporates work covered by the following license notice:
- *
- *   Licensed to the Apache Software Foundation (ASF) under one or more
- *   contributor license agreements. See the NOTICE file distributed
- *   with this work for additional information regarding copyright
- *   ownership. The ASF licenses this file to you under the Apache
- *   License, Version 2.0 (the "License"); you may not use this file
- *   except in compliance with the License. You may obtain a copy of
- *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
- */
-
-#include <deque>
-
-#include <unotools/internaloptions.hxx>
-#include <unotools/configmgr.hxx>
-#include <unotools/configitem.hxx>
-#include <tools/debug.hxx>
-#include <com/sun/star/uno/Any.hxx>
-#include <com/sun/star/uno/Sequence.hxx>
-#include <com/sun/star/beans/PropertyValue.hpp>
-
-#include <rtl/logfile.hxx>
-#include "itemholder1.hxx"
-
-//_________________________________________________________________________________________________________________
-//  namespaces
-//_________________________________________________________________________________________________________________
-
-using namespace ::utl                   ;
-using namespace ::rtl                   ;
-using namespace ::osl                   ;
-using namespace ::std                   ;
-using namespace ::com::sun::star::uno   ;
-using namespace ::com::sun::star::beans ;
-
-#define ROOTNODE_INTERNAL                   OUString("Office.Common/Internal")
-#define DEFAULT_SLOTCFG                     sal_False
-#define DEFAULT_SENDCRASHMAIL               sal_False
-#define DEFAULT_USEMAILUI                   sal_True
-#define DEFAULT_CURRENTTEMPURL              OUString("")
-
-#define FIXPROPERTYNAME_SLOTCFG             OUString("Slot")
-#define FIXPROPERTYNAME_SENDCRASHMAIL       OUString("SendCrashMail")
-#define FIXPROPERTYNAME_USEMAILUI           OUString("UseMailUI")
-#define FIXPROPERTYNAME_CURRENTTEMPURL      OUString("CurrentTempURL")
-
-#define FIXPROPERTYHANDLE_SLOTCFG           0
-#define FIXPROPERTYHANDLE_SENDCRASHMAIL     1
-#define FIXPROPERTYHANDLE_USEMAILUI         2
-#define FIXPROPERTYHANDLE_CURRENTTEMPURL    3
-
-class SvtInternalOptions_Impl : public ConfigItem
-{
-    //-------------------------------------------------------------------------------------------------------------
-    //  private member
-    //-------------------------------------------------------------------------------------------------------------
-
-    private:
-
-        sal_Bool                m_bRemoveMenuEntryClose;
-        sal_Bool                m_bRemoveMenuEntryBackToWebtop;
-        sal_Bool                m_bRemoveMenuEntryNewWebtop;
-        sal_Bool                m_bRemoveMenuEntryLogout;
-        sal_Bool                m_bSlotCFG          ;   /// cache "Slot" of Internal section
-        sal_Bool                m_bSendCrashMail    ;   /// cache "SendCrashMail" of Internal section
-        sal_Bool                m_bUseMailUI;
-        OUString                m_aCurrentTempURL   ;
-    //-------------------------------------------------------------------------------------------------------------
-    //  public methods
-    //-------------------------------------------------------------------------------------------------------------
-
-    public:
-
-        //---------------------------------------------------------------------------------------------------------
-        //  constructor / destructor
-        //---------------------------------------------------------------------------------------------------------
-
-         SvtInternalOptions_Impl();
-        ~SvtInternalOptions_Impl();
-
-        //---------------------------------------------------------------------------------------------------------
-        //  overloaded methods of baseclass
-        //---------------------------------------------------------------------------------------------------------
-
-        /*-****************************************************************************************************//**
-            @short      called for notify of configmanager
-            @descr      These method is called from the ConfigManager before application ends or from the
-                         PropertyChangeListener if the sub tree broadcasts changes. You must update your
-                        internal values.
-
-            @seealso    baseclass ConfigItem
-
-            @param      "seqPropertyNames" is the list of properties which should be updated.
-            @return     -
-
-            @onerror    -
-        *//*-*****************************************************************************************************/
-
-        virtual void Notify( const Sequence< OUString >& )
-        {
-            DBG_ASSERT( sal_False, "SvtInternalOptions::Notify()\nNot used yet ... but called!?\n" );
-        }
-
-        /*-****************************************************************************************************//**
-            @short      write changes to configuration
-            @descr      These method writes the changed values into the sub tree
-                        and should always called in our destructor to guarantee consistency of config data.
-
-            @seealso    baseclass ConfigItem
-
-            @param      -
-            @return     -
-
-            @onerror    -
-        *//*-*****************************************************************************************************/
-
-        virtual void Commit();
-
-        //---------------------------------------------------------------------------------------------------------
-        //  public interface
-        //---------------------------------------------------------------------------------------------------------
-
-        /*-****************************************************************************************************//**
-            @short      access method to get internal values
-            @descr      These method give us a chance to regulate acces to ouer internal values.
-                        It's not used in the moment - but it's possible for the feature!
-
-            @seealso    -
-
-            @param      -
-            @return     -
-
-            @onerror    -
-        *//*-*****************************************************************************************************/
-
-        sal_Bool    IsRemoveMenuEntryClose() const { return m_bRemoveMenuEntryClose; }
-        sal_Bool    IsRemoveMenuEntryBackToWebtop() const { return m_bRemoveMenuEntryBackToWebtop; }
-        sal_Bool    IsRemoveMenuEntryNewWebtop() const { return m_bRemoveMenuEntryNewWebtop; }
-        sal_Bool    IsRemoveMenuEntryLogout() const { return m_bRemoveMenuEntryLogout; }
-        sal_Bool    SlotCFGEnabled      () const { return m_bSlotCFG; }
-        sal_Bool    CrashMailEnabled    () const { return m_bSendCrashMail; }
-        sal_Bool    MailUIEnabled       () const { return m_bUseMailUI; }
-
-        OUString    GetCurrentTempURL() const { return m_aCurrentTempURL; }
-        void        SetCurrentTempURL( const OUString& aNewCurrentTempURL );
-    //-------------------------------------------------------------------------------------------------------------
-    //  private methods
-    //-------------------------------------------------------------------------------------------------------------
-
-    private:
-
-        /*-****************************************************************************************************//**
-            @short      return list of fix key names of ouer configuration management which represent oue module tree
-            @descr      These methods return a static const list of key names. We need it to get needed values from our
-                        configuration management. We return well known key names only - because the "UserData" node
-                        is handled in a special way!
-
-            @seealso    -
-
-            @param      -
-            @return     A list of needed configuration keys is returned.
-
-            @onerror    -
-        *//*-*****************************************************************************************************/
-
-        Sequence< OUString > impl_GetPropertyNames();
-};
-
-//*****************************************************************************************************************
-//  constructor
-//*****************************************************************************************************************
-SvtInternalOptions_Impl::SvtInternalOptions_Impl()
-    // Init baseclasses first
-    :   ConfigItem          ( ROOTNODE_INTERNAL, CONFIG_MODE_IMMEDIATE_UPDATE )
-    // Init member then.
-    , m_bRemoveMenuEntryClose(sal_False)
-    , m_bRemoveMenuEntryBackToWebtop(sal_False)
-    , m_bRemoveMenuEntryNewWebtop(sal_False)
-    , m_bRemoveMenuEntryLogout(sal_False)
-    , m_bSlotCFG(DEFAULT_SLOTCFG)
-    , m_bSendCrashMail(DEFAULT_SENDCRASHMAIL)
-    , m_bUseMailUI(DEFAULT_USEMAILUI)
-    , m_aCurrentTempURL(DEFAULT_CURRENTTEMPURL)
-{
-    // Use our list of configuration keys to get his values.
-    // structure of internal section: (first 2 entries are fixed - all other are member of a set!)
-    //      "Slot"
-    //      "SendCrashMail"
-    //      "RecoveryList/r1/URL"
-    //      "RecoveryList/r1/Filter"
-    //      "RecoveryList/r1/TempName"
-    //      "RecoveryList/r2/URL"
-    //      "RecoveryList/r2/Filter"
-    //      "RecoveryList/r2/TempName"
-    //      "RecoveryList/.."
-    Sequence< OUString >    seqNames    = impl_GetPropertyNames()   ;
-    Sequence< Any >         seqValues   = GetProperties( seqNames ) ;
-
-    // Safe impossible cases.
-    // We need values from ALL configuration keys.
-    // Follow assignment use order of values in relation to our list of key names!
-    DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nI miss some values of configuration keys!\n" );
-
-    // Read fixed values first!
-    DBG_ASSERT(!seqValues[FIXPROPERTYHANDLE_SLOTCFG].hasValue() || (seqValues[FIXPROPERTYHANDLE_SLOTCFG].getValueTypeClass() == TypeClass_BOOLEAN), "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nWho has changed the value type of \"Office.Common\\Internal\\Slot\"?");
-    DBG_ASSERT(!seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL].hasValue() || !(seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtInternalOptions_Impl::SvtInternalOptions_Impl()\nWho has changed the value type of \"Office.Common\\Internal\\SendCrashMail\"?");
-    seqValues[FIXPROPERTYHANDLE_SLOTCFG] >>= m_bSlotCFG;
-    seqValues[FIXPROPERTYHANDLE_SENDCRASHMAIL] >>= m_bSendCrashMail;
-    seqValues[FIXPROPERTYHANDLE_USEMAILUI] >>= m_bUseMailUI;
-    seqValues[FIXPROPERTYHANDLE_CURRENTTEMPURL] >>= m_aCurrentTempURL;
-}
-
-//*****************************************************************************************************************
-//  destructor
-//*****************************************************************************************************************
-SvtInternalOptions_Impl::~SvtInternalOptions_Impl()
-{
-    if( IsModified() == sal_True )
-    {
-        Commit();
-    }
-}
-
-//*****************************************************************************************************************
-//  public method
-//*****************************************************************************************************************
-void SvtInternalOptions_Impl::Commit()
-{
-    // We have to write our current temp URL
-    Sequence< OUString > aNames( 1 );
-    OUString* pNames = aNames.getArray();
-    Sequence< Any > aValues( 1 );
-    Any* pValues = aValues.getArray();
-
-    pNames[0] = FIXPROPERTYNAME_CURRENTTEMPURL;
-    pValues[0] <<= m_aCurrentTempURL;
-
-    PutProperties( aNames, aValues );
-}
-
-//*****************************************************************************************************************
-//  public method
-//*****************************************************************************************************************
-void SvtInternalOptions_Impl::SetCurrentTempURL( const OUString& aNewCurrentTempURL )
-{
-    m_aCurrentTempURL = aNewCurrentTempURL;
-    SetModified();
-    Commit();
-}
-
-//*****************************************************************************************************************
-//  private method
-//*****************************************************************************************************************
-Sequence< OUString > SvtInternalOptions_Impl::impl_GetPropertyNames()
-{
-    Sequence< OUString > seqProperties(4);
-
-    // Add names of fix properties to list.
-    seqProperties[FIXPROPERTYHANDLE_SLOTCFG         ]   =   FIXPROPERTYNAME_SLOTCFG         ;
-    seqProperties[FIXPROPERTYHANDLE_SENDCRASHMAIL   ]   =   FIXPROPERTYNAME_SENDCRASHMAIL   ;
-    seqProperties[FIXPROPERTYHANDLE_USEMAILUI       ]   =   FIXPROPERTYNAME_USEMAILUI       ;
-    seqProperties[FIXPROPERTYHANDLE_CURRENTTEMPURL  ]   =   FIXPROPERTYNAME_CURRENTTEMPURL  ;
-    // Return result.
-    return seqProperties;
-}
-
-//*****************************************************************************************************************
-//  initialize static member
-//  DON'T DO IT IN YOUR HEADER!
-//  see definition for further informations
-//*****************************************************************************************************************
-SvtInternalOptions_Impl*    SvtInternalOptions::m_pDataContainer    = NULL  ;
-sal_Int32                   SvtInternalOptions::m_nRefCount         = 0     ;
-
-//*****************************************************************************************************************
-//  constructor
-//*****************************************************************************************************************
-SvtInternalOptions::SvtInternalOptions()
-{
-    // Global access, must be guarded (multithreading!).
-    MutexGuard aGuard( GetOwnStaticMutex() );
-    // Increase ouer refcount ...
-    ++m_nRefCount;
-    // ... and initialize ouer data container only if it not already!
-    if( m_pDataContainer == NULL )
-    {
-        RTL_LOGFILE_CONTEXT(aLog, "unotools ( ??? ) ::SvtInternalOptions_Impl::ctor()");
-        m_pDataContainer = new SvtInternalOptions_Impl();
-
-        ItemHolder1::holdConfigItem(E_INTERNALOPTIONS);
-     }
-}
-
-//*****************************************************************************************************************
-//  destructor
-//*****************************************************************************************************************
-SvtInternalOptions::~SvtInternalOptions()
-{
-    // Global access, must be guarded (multithreading!)
-    MutexGuard aGuard( GetOwnStaticMutex() );
-    // Decrease ouer refcount.
-    --m_nRefCount;
-    // If last instance was deleted ...
-    // we must destroy ouer static data container!
-    if( m_nRefCount <= 0 )
-    {
-        delete m_pDataContainer;
-        m_pDataContainer = NULL;
-    }
-}
-
-//*****************************************************************************************************************
-//  public method
-//*****************************************************************************************************************
-sal_Bool SvtInternalOptions::SlotCFGEnabled() const
-{
-    MutexGuard aGuard( GetOwnStaticMutex() );
-    return m_pDataContainer->SlotCFGEnabled();
-}
-
-//*****************************************************************************************************************
-//  public method
-//*****************************************************************************************************************
-sal_Bool SvtInternalOptions::MailUIEnabled() const
-{
-    MutexGuard aGuard( GetOwnStaticMutex() );
-    return m_pDataContainer->MailUIEnabled();
-}
-
-OUString SvtInternalOptions::GetCurrentTempURL() const
-{
-    MutexGuard aGuard( GetOwnStaticMutex() );
-    return m_pDataContainer->GetCurrentTempURL();
-}
-
-void SvtInternalOptions::SetCurrentTempURL( const OUString& aNewCurrentTempURL )
-{
-    MutexGuard aGuard( GetOwnStaticMutex() );
-    m_pDataContainer->SetCurrentTempURL( aNewCurrentTempURL );
-}
-
-namespace
-{
-    class theInternalOptionsMutex : public rtl::Static<osl::Mutex, theInternalOptionsMutex>{};
-}
-
-//*****************************************************************************************************************
-//  private method
-//*****************************************************************************************************************
-Mutex& SvtInternalOptions::GetOwnStaticMutex()
-{
-    return theInternalOptionsMutex::get();
-}
-
-/* vim:set shiftwidth=4 softtabstop=4 expandtab: */