diff options
author | Miklos Vajna <vmiklos@suse.cz> | 2013-01-04 15:39:44 +0100 |
---|---|---|
committer | Miklos Vajna <vmiklos@suse.cz> | 2013-01-04 16:11:57 +0100 |
commit | b08ded38b0e0eeb8d150e7f71137833396e22387 (patch) | |
tree | 1086ed768d281a6ed91b8c1347becc57fbbb2061 /oox/source/drawingml/customshapegeometry.cxx | |
parent | b53d03f4c970f13f9849c01f1d0b6ad42185148d (diff) |
oox: kill no longer needed CREATE_OUSTRING
Diffstat (limited to 'oox/source/drawingml/customshapegeometry.cxx')
-rw-r--r-- | oox/source/drawingml/customshapegeometry.cxx | 126 |
1 files changed, 63 insertions, 63 deletions
diff --git a/oox/source/drawingml/customshapegeometry.cxx b/oox/source/drawingml/customshapegeometry.cxx index 790b253da796..ffa0e6fcf61f 100644 --- a/oox/source/drawingml/customshapegeometry.cxx +++ b/oox/source/drawingml/customshapegeometry.cxx @@ -116,9 +116,9 @@ OUString GetFormulaParameter( const EnhancedCustomShapeParameter& rParameter ) sal_Int32 nFormulaIndex; if ( rParameter.Value >>= nFormulaIndex ) { - aRet = CREATE_OUSTRING( "?" ) + aRet = "?" + OUString::valueOf( nFormulaIndex ) - + CREATE_OUSTRING( " " ); + + " "; } } else @@ -134,9 +134,9 @@ OUString GetFormulaParameter( const EnhancedCustomShapeParameter& rParameter ) sal_Int32 nAdjustmentIndex; if ( rParameter.Value >>= nAdjustmentIndex ) { - aRet = CREATE_OUSTRING( "$" ) + aRet = "$" + OUString::valueOf( nAdjustmentIndex ) - + CREATE_OUSTRING( " " ); + + " "; } } else @@ -147,73 +147,73 @@ OUString GetFormulaParameter( const EnhancedCustomShapeParameter& rParameter ) break; case EnhancedCustomShapeParameterType::LEFT : { - const OUString sLeft( CREATE_OUSTRING( "left" ) ); + const OUString sLeft( "left" ); aRet = sLeft; } break; case EnhancedCustomShapeParameterType::TOP : { - const OUString sTop( CREATE_OUSTRING( "top" ) ); + const OUString sTop( "top" ); aRet = sTop; } break; case EnhancedCustomShapeParameterType::RIGHT : { - const OUString sRight( CREATE_OUSTRING( "right" ) ); + const OUString sRight( "right" ); aRet = sRight; } break; case EnhancedCustomShapeParameterType::BOTTOM : { - const OUString sBottom( CREATE_OUSTRING( "bottom" ) ); + const OUString sBottom( "bottom" ); aRet = sBottom; } break; case EnhancedCustomShapeParameterType::XSTRETCH : { - const OUString sXStretch( CREATE_OUSTRING( "xstretch" ) ); + const OUString sXStretch( "xstretch" ); aRet = sXStretch; } break; case EnhancedCustomShapeParameterType::YSTRETCH : { - const OUString sYStretch( CREATE_OUSTRING( "ystretch" ) ); + const OUString sYStretch( "ystretch" ); aRet = sYStretch; } break; case EnhancedCustomShapeParameterType::HASSTROKE : { - const OUString sHasStroke( CREATE_OUSTRING( "hasstroke" ) ); + const OUString sHasStroke( "hasstroke" ); aRet = sHasStroke; } break; case EnhancedCustomShapeParameterType::HASFILL : { - const OUString sHasFill( CREATE_OUSTRING( "hasfill" ) ); + const OUString sHasFill( "hasfill" ); aRet = sHasFill; } break; case EnhancedCustomShapeParameterType::WIDTH : { - const OUString sWidth( CREATE_OUSTRING( "width" ) ); + const OUString sWidth( "width" ); aRet = sWidth; } break; case EnhancedCustomShapeParameterType::HEIGHT : { - const OUString sHeight( CREATE_OUSTRING( "height" ) ); + const OUString sHeight( "height" ); aRet = sHeight; } break; case EnhancedCustomShapeParameterType::LOGWIDTH : { - const OUString sLogWidth( CREATE_OUSTRING( "logwidth" ) ); + const OUString sLogWidth( "logwidth" ); aRet = sLogWidth; } break; case EnhancedCustomShapeParameterType::LOGHEIGHT : { - const OUString sLogHeight( CREATE_OUSTRING( "logheight" ) ); + const OUString sLogHeight( "logheight" ); aRet = sLogHeight; } break; @@ -251,7 +251,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu { CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "logheight" ); + aGuide.maFormula = "logheight" ; aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -281,7 +281,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "logheight/" ) + OUString::valueOf( nIntVal ); + aGuide.maFormula = "logheight/" + OUString::valueOf( nIntVal ); aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -300,7 +300,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu { CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "max(logwidth,logheight)" ); + aGuide.maFormula = "max(logwidth,logheight)"; aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -310,7 +310,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu { CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "min(logwidth,logheight)" ); + aGuide.maFormula = "min(logwidth,logheight)"; aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -332,7 +332,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "min(logwidth,logheight)/" ) + OUString::valueOf( nIntVal ); + aGuide.maFormula = "min(logwidth,logheight)/" + OUString::valueOf( nIntVal ); aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -346,7 +346,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu { CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "logwidth" ); + aGuide.maFormula = "logwidth" ; aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -379,7 +379,7 @@ static EnhancedCustomShapeParameter GetAdjCoordinate( CustomShapeProperties& rCu CustomShapeGuide aGuide; aGuide.maName = rValue; - aGuide.maFormula = CREATE_OUSTRING( "logwidth/" ) + OUString::valueOf( nIntVal ); + aGuide.maFormula = "logwidth/" + OUString::valueOf( nIntVal ); aRet.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( rCustomShapeProperties.getGuideList(), aGuide ) ); aRet.Type = EnhancedCustomShapeParameterType::EQUATION; @@ -498,116 +498,116 @@ static OUString convertToOOEquation( CustomShapeProperties& rCustomShapeProperti case FC_MULDIV : { if ( nParameters == 3 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "*" ) + sParameters[ 1 ] - + CREATE_OUSTRING( "/" ) + sParameters[ 2 ]; + aEquation = sParameters[ 0 ] + "*" + sParameters[ 1 ] + + "/" + sParameters[ 2 ]; } break; case FC_PLUSMINUS : { if ( nParameters == 3 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "+" ) + sParameters[ 1 ] - + CREATE_OUSTRING( "-" ) + sParameters[ 2 ]; + aEquation = sParameters[ 0 ] + "+" + sParameters[ 1 ] + + "-" + sParameters[ 2 ]; } break; case FC_PLUSDIV : { if ( nParameters == 3 ) - aEquation = CREATE_OUSTRING( "(" ) + sParameters[ 0 ] + CREATE_OUSTRING( "+" ) - + sParameters[ 1 ] + CREATE_OUSTRING( ")/" ) + sParameters[ 2 ]; + aEquation = "(" + sParameters[ 0 ] + "+" + + sParameters[ 1 ] + ")/" + sParameters[ 2 ]; } break; case FC_IFELSE : case FC_IFELSE1 : { if ( nParameters == 3 ) - aEquation = CREATE_OUSTRING( "if(" ) + sParameters[ 0 ] + CREATE_OUSTRING( "," ) - + sParameters[ 1 ] + CREATE_OUSTRING( "," ) + sParameters[ 2 ] + CREATE_OUSTRING( ")" ); + aEquation = "if(" + sParameters[ 0 ] + "," + + sParameters[ 1 ] + "," + sParameters[ 2 ] + ")"; } break; case FC_ABS : { if ( nParameters == 1 ) - aEquation = CREATE_OUSTRING( "abs(" ) + sParameters[ 0 ] + CREATE_OUSTRING( ")" ); + aEquation = "abs(" + sParameters[ 0 ] + ")"; } break; case FC_AT2 : { if ( nParameters == 2 ) - aEquation = CREATE_OUSTRING( "(10800000*atan2(" ) + sParameters[ 1 ] + CREATE_OUSTRING( "," ) - + sParameters[ 0 ] + CREATE_OUSTRING( "))/pi" ); + aEquation = "(10800000*atan2(" + sParameters[ 1 ] + "," + + sParameters[ 0 ] + "))/pi"; } break; case FC_CAT2 : { if ( nParameters == 3 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "*(cos(atan2(" ) + - sParameters[ 2 ] + CREATE_OUSTRING( "," ) + sParameters[ 1 ] + CREATE_OUSTRING( ")))" ); + aEquation = sParameters[ 0 ] + "*(cos(atan2(" + + sParameters[ 2 ] + "," + sParameters[ 1 ] + ")))"; } break; case FC_COS : { if ( nParameters == 2 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "*cos(pi*(" ) + - sParameters[ 1 ] + CREATE_OUSTRING( ")/10800000)" ); + aEquation = sParameters[ 0 ] + "*cos(pi*(" + + sParameters[ 1 ] + ")/10800000)"; } break; case FC_MAX : { if ( nParameters == 2 ) - aEquation = CREATE_OUSTRING( "max(" ) + sParameters[ 0 ] + CREATE_OUSTRING( "," ) + - sParameters[ 1 ] + CREATE_OUSTRING( ")" ); + aEquation = "max(" + sParameters[ 0 ] + "," + + sParameters[ 1 ] + ")"; } break; case FC_MIN : { if ( nParameters == 2 ) - aEquation = CREATE_OUSTRING( "min(" ) + sParameters[ 0 ] + CREATE_OUSTRING( "," ) + - sParameters[ 1 ] + CREATE_OUSTRING( ")" ); + aEquation = "min(" + sParameters[ 0 ] + "," + + sParameters[ 1 ] + ")"; } break; case FC_MOD : { if ( nParameters == 3 ) - aEquation = CREATE_OUSTRING( "sqrt(" ) - + sParameters[ 0 ] + CREATE_OUSTRING( "*" ) + sParameters[ 0 ] + CREATE_OUSTRING( "+" ) - + sParameters[ 1 ] + CREATE_OUSTRING( "*" ) + sParameters[ 1 ] + CREATE_OUSTRING( "+" ) - + sParameters[ 2 ] + CREATE_OUSTRING( "*" ) + sParameters[ 2 ] + CREATE_OUSTRING( ")" ); + aEquation = "sqrt(" + + sParameters[ 0 ] + "*" + sParameters[ 0 ] + "+" + + sParameters[ 1 ] + "*" + sParameters[ 1 ] + "+" + + sParameters[ 2 ] + "*" + sParameters[ 2 ] + ")"; } break; case FC_PIN : { if ( nParameters == 3 ) // if(x-y,x,if(y-z,z,y)) - aEquation = CREATE_OUSTRING( "if(" ) + sParameters[ 0 ] + CREATE_OUSTRING( "-" ) + sParameters[ 1 ] - + CREATE_OUSTRING( "," ) + sParameters[ 0 ] + CREATE_OUSTRING( ",if(" ) + sParameters[ 2 ] - + CREATE_OUSTRING( "-" ) + sParameters[ 1 ] + CREATE_OUSTRING( "," ) + sParameters[ 1 ] - + CREATE_OUSTRING( "," ) + sParameters[ 2 ] + CREATE_OUSTRING( "))" ); + aEquation = "if(" + sParameters[ 0 ] + "-" + sParameters[ 1 ] + + "," + sParameters[ 0 ] + ",if(" + sParameters[ 2 ] + + "-" + sParameters[ 1 ] + "," + sParameters[ 1 ] + + "," + sParameters[ 2 ] + "))"; } break; case FC_SAT2 : { if ( nParameters == 3 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "*(sin(atan2(" ) + - sParameters[ 2 ] + CREATE_OUSTRING( "," ) + sParameters[ 1 ] + CREATE_OUSTRING( ")))" ); + aEquation = sParameters[ 0 ] + "*(sin(atan2(" + + sParameters[ 2 ] + "," + sParameters[ 1 ] + ")))"; } break; case FC_SIN : { if ( nParameters == 2 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "*sin(pi*(" ) + - sParameters[ 1 ] + CREATE_OUSTRING( ")/10800000)" ); + aEquation = sParameters[ 0 ] + "*sin(pi*(" + + sParameters[ 1 ] + ")/10800000)"; } break; case FC_SQRT : { if ( nParameters == 1 ) - aEquation = CREATE_OUSTRING( "sqrt(" ) + sParameters[ 0 ] + CREATE_OUSTRING( ")" ); + aEquation = "sqrt(" + sParameters[ 0 ] + ")"; } break; case FC_TAN : { if ( nParameters == 2 ) - aEquation = sParameters[ 0 ] + CREATE_OUSTRING( "*tan(pi*(" ) + - sParameters[ 1 ] + CREATE_OUSTRING( ")/10800000)" ); + aEquation = sParameters[ 0 ] + "*tan(pi*(" + + sParameters[ 1 ] + ")/10800000)"; } break; case FC_VAL : @@ -1100,18 +1100,18 @@ Reference< XFastContextHandler > Path2DContext::createFastChildContext( sal_Int3 sal_Int32 nArcNum = mrCustomShapeProperties.getArcNum(); // start angle - aGuide.maName = CREATE_OUSTRING("arctosa") + OUString::valueOf( nArcNum ); - aGuide.maFormula = CREATE_OUSTRING( "(") + aGuide.maName = "arctosa" + OUString::valueOf( nArcNum ); + aGuide.maFormula = "(" + GetFormulaParameter( GetAdjCoordinate( mrCustomShapeProperties, xAttribs->getOptionalValue( XML_stAng ) ) ) - + CREATE_OUSTRING( ")/60000.0" ); + + ")/60000.0"; aAngles.First.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( mrCustomShapeProperties.getGuideList(), aGuide ) ); aAngles.First.Type = EnhancedCustomShapeParameterType::EQUATION; // swing angle - aGuide.maName = CREATE_OUSTRING("arctosw") + OUString::valueOf( nArcNum ); - aGuide.maFormula = CREATE_OUSTRING( "(") + aGuide.maName = "arctosw" + OUString::valueOf( nArcNum ); + aGuide.maFormula = "(" + GetFormulaParameter( GetAdjCoordinate( mrCustomShapeProperties, xAttribs->getOptionalValue( XML_swAng ) ) ) - + CREATE_OUSTRING( ")/60000.0" ); + + ")/60000.0"; aAngles.Second.Value = Any( CustomShapeProperties::SetCustomShapeGuideValue( mrCustomShapeProperties.getGuideList(), aGuide ) ); aAngles.Second.Type = EnhancedCustomShapeParameterType::EQUATION; |