diff options
author | Martin Hollmichel <mh@openoffice.org> | 2001-04-23 11:24:19 +0000 |
---|---|---|
committer | Martin Hollmichel <mh@openoffice.org> | 2001-04-23 11:24:19 +0000 |
commit | 957cb931a429988f4a1efee63fe47db2d16ff68f (patch) | |
tree | a89f50c048f0fb88a463d25d2d9b966cd46082fe /dmake/Makefile.in | |
parent | b1e4a86748d143883f0d77c09d6e1796d1f5375e (diff) |
del:
Diffstat (limited to 'dmake/Makefile.in')
-rwxr-xr-x | dmake/Makefile.in | 516 |
1 files changed, 0 insertions, 516 deletions
diff --git a/dmake/Makefile.in b/dmake/Makefile.in deleted file mode 100755 index b23c1508daf8..000000000000 --- a/dmake/Makefile.in +++ /dev/null @@ -1,516 +0,0 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am - -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -#************************************************************************* -# -# $RCSfile: Makefile.in,v $ -# -# $Revision: 1.2 $ -# -# last change: $Author: mh $ $Date: 2001-04-23 12:22:28 $ -# -# The Contents of this file are made available subject to the terms of -# either of the following licenses -# -# - GNU Lesser General Public License Version 2.1 -# - Sun Industry Standards Source License Version 1.1 -# -# Sun Microsystems Inc., October, 2000 -# -# GNU Lesser General Public License Version 2.1 -# ============================================= -# Copyright 2000 by Sun Microsystems, Inc. -# 901 San Antonio Road, Palo Alto, CA 94303, USA -# -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License version 2.1, as published by the Free Software Foundation. -# -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# -# Sun Industry Standards Source License Version 1.1 -# ================================================= -# The contents of this file are subject to the Sun Industry Standards -# Source License Version 1.1 (the "License"); You may not use this file -# except in compliance with the License. You may obtain a copy of the -# License at http://www.openoffice.org/license.html. -# -# Software provided under this License is provided on an "AS IS" basis, -# WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, -# WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, -# MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. -# See the License for the specific provisions governing your rights and -# obligations concerning the Software. -# -# The Initial Developer of the Original Code is: Sun Microsystems, Inc. -# -# Copyright: 2000 by Sun Microsystems, Inc. -# -# All Rights Reserved. -# -# Contributor(s): _______________________________________ -# -# -# -#************************************************************************* - -# require automake 1.4 - - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include - -DESTDIR = - -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ - -top_builddir = . - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -transform = @program_transform_name@ - -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -CC = @CC@ -CPP = @CPP@ -CXX = @CXX@ -LN_S = @LN_S@ -MAKEINFO = @MAKEINFO@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -VERSION = @VERSION@ - -AUTOMAKE_OPTIONS = 1.4 - -bin_PROGRAMS = dmake -dmake_SOURCES = infer.c make.c stat.c expand.c dmstring.c hash.c dag.c dmake.c path.c imacs.c sysintf.c parse.c getinp.c quit.c state.c dmdump.c macparse.c rulparse.c percent.c function.c - -dmake_LDADD = unix/libunix.a - -SUBDIRS = unix startup - -EXTRA_DIST = make.c - -# set the include path found by configure -INCLUDES = -I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/unix/linux -I$(top_srcdir)/unix -I$(top_srcdir)/unix/linux/gnu -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_CLEAN_FILES = dmakeroot.h -PROGRAMS = $(bin_PROGRAMS) - - -DEFS = @DEFS@ -I. -I$(srcdir) -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -dmake_OBJECTS = infer.o make.o stat.o expand.o dmstring.o hash.o dag.o \ -dmake.o path.o imacs.o sysintf.o parse.o getinp.o quit.o state.o \ -dmdump.o macparse.o rulparse.o percent.o function.o -dmake_DEPENDENCIES = unix/libunix.a -dmake_LDFLAGS = -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ -DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \ -Makefile.am Makefile.in NEWS acinclude.m4 aclocal.m4 config.guess \ -config.sub configure configure.in dmakeroot.h.in install-sh ltconfig \ -ltmain.sh missing mkinstalldirs - - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - -TAR = gtar -GZIP_ENV = --best -DEP_FILES = .deps/dag.P .deps/dmake.P .deps/dmdump.P .deps/dmstring.P \ -.deps/expand.P .deps/function.P .deps/getinp.P .deps/hash.P \ -.deps/imacs.P .deps/infer.P .deps/macparse.P .deps/make.P .deps/parse.P \ -.deps/path.P .deps/percent.P .deps/quit.P .deps/rulparse.P .deps/stat.P \ -.deps/state.P .deps/sysintf.P -SOURCES = $(dmake_SOURCES) -OBJECTS = $(dmake_OBJECTS) - -all: all-redirect -.SUFFIXES: -.SUFFIXES: .S .c .o .s -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): configure.in acinclude.m4 - cd $(srcdir) && $(ACLOCAL) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) - cd $(srcdir) && $(AUTOCONF) -dmakeroot.h: $(top_builddir)/config.status dmakeroot.h.in - cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -mostlyclean-binPROGRAMS: - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) - -distclean-binPROGRAMS: - -maintainer-clean-binPROGRAMS: - -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - list='$(bin_PROGRAMS)'; for p in $$list; do \ - rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ - done - -.s.o: - $(COMPILE) -c $< - -.S.o: - $(COMPILE) -c $< - -mostlyclean-compile: - -rm -f *.o core *.core - -clean-compile: - -distclean-compile: - -rm -f *.tab.c - -maintainer-clean-compile: - -dmake: $(dmake_OBJECTS) $(dmake_DEPENDENCIES) - @rm -f dmake - $(LINK) $(dmake_LDFLAGS) $(dmake_OBJECTS) $(dmake_LDADD) $(LIBS) - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. - -@SET_MAKE@ - -all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive \ -check-recursive installcheck-recursive info-recursive dvi-recursive: - @set fnord $(MAKEFLAGS); amf=$$2; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @set fnord $(MAKEFLAGS); amf=$$2; \ - dot_seen=no; \ - rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ - rev="$$subdir $$rev"; \ - test "$$subdir" = "." && dot_seen=yes; \ - done; \ - test "$$dot_seen" = "no" && rev=". $$rev"; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - here=`pwd` && cd $(srcdir) \ - && mkid -f$$here/ID $$unique $(LISP) - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ - || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) - -mostlyclean-tags: - -clean-tags: - -distclean-tags: - -rm -f TAGS ID - -maintainer-clean-tags: - -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - -rm -rf $(distdir) - GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - dc_install_base=`cd $(distdir)/=inst && pwd`; \ - cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) dist - -rm -rf $(distdir) - @banner="$(distdir).tar.gz is ready for distribution"; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes" -dist: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -dist-all: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -distdir: $(DISTFILES) - -rm -rf $(distdir) - mkdir $(distdir) - -chmod 777 $(distdir) - here=`cd $(top_builddir) && pwd`; \ - top_distdir=`cd $(distdir) && pwd`; \ - distdir=`cd $(distdir) && pwd`; \ - cd $(top_srcdir) \ - && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile - @for file in $(DISTFILES); do \ - d=$(srcdir); \ - if test -d $$d/$$file; then \ - cp -pr $$/$$file $(distdir)/$$file; \ - else \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file || :; \ - fi; \ - done - for subdir in $(SUBDIRS); do \ - if test "$$subdir" = .; then :; else \ - test -d $(distdir)/$$subdir \ - || mkdir $(distdir)/$$subdir \ - || exit 1; \ - chmod 777 $(distdir)/$$subdir; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ - || exit 1; \ - fi; \ - done - -DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) - --include $(DEP_FILES) - -mostlyclean-depend: - -clean-depend: - -distclean-depend: - -rm -rf .deps - -maintainer-clean-depend: - -%.o: %.c - @echo '$(COMPILE) -c $<'; \ - $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< - @-cp .deps/$(*F).pp .deps/$(*F).P; \ - tr ' ' '\012' < .deps/$(*F).pp \ - | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ - >> .deps/$(*F).P; \ - rm .deps/$(*F).pp - -%.lo: %.c - @echo '$(LTCOMPILE) -c $<'; \ - $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< - @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ - < .deps/$(*F).pp > .deps/$(*F).P; \ - tr ' ' '\012' < .deps/$(*F).pp \ - | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ - >> .deps/$(*F).P; \ - rm -f .deps/$(*F).pp -info-am: -info: info-recursive -dvi-am: -dvi: dvi-recursive -check-am: all-am -check: check-recursive -installcheck-am: -installcheck: installcheck-recursive -install-exec-am: install-binPROGRAMS -install-exec: install-exec-recursive - -install-data-am: -install-data: install-data-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -install: install-recursive -uninstall-am: uninstall-binPROGRAMS -uninstall: uninstall-recursive -all-am: Makefile $(PROGRAMS) -all-redirect: all-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -installdirs: installdirs-recursive -installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(bindir) - - -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* - -maintainer-clean-generic: -mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ - mostlyclean-tags mostlyclean-depend mostlyclean-generic - -mostlyclean: mostlyclean-recursive - -clean-am: clean-binPROGRAMS clean-compile clean-tags clean-depend \ - clean-generic mostlyclean-am - -clean: clean-recursive - -distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \ - distclean-depend distclean-generic clean-am - -distclean: distclean-recursive - -rm -f config.status - -maintainer-clean-am: maintainer-clean-binPROGRAMS \ - maintainer-clean-compile maintainer-clean-tags \ - maintainer-clean-depend maintainer-clean-generic \ - distclean-am - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - -maintainer-clean: maintainer-clean-recursive - -rm -f config.status - -.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ -maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ -mostlyclean-compile distclean-compile clean-compile \ -maintainer-clean-compile install-data-recursive \ -uninstall-data-recursive install-exec-recursive \ -uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ -all-recursive check-recursive installcheck-recursive info-recursive \ -dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ -maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ -distclean-tags clean-tags maintainer-clean-tags distdir \ -mostlyclean-depend distclean-depend clean-depend \ -maintainer-clean-depend info-am info dvi-am dvi check check-am \ -installcheck-am installcheck install-exec-am install-exec \ -install-data-am install-data install-am install uninstall-am uninstall \ -all-redirect all-am all installdirs-am installdirs mostlyclean-generic \ -distclean-generic clean-generic maintainer-clean-generic clean \ -mostlyclean distclean maintainer-clean - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: |