chart2: Separate ChartResourceGroups to reuse

Change-Id: I0ca2ea9cd520013250faaba0e17e713da1e6fca3
Reviewed-on: https://gerrit.libreoffice.org/81581
Reviewed-by: Muhammet Kara <muhammet.kara@collabora.com>
Tested-by: Muhammet Kara <muhammet.kara@collabora.com>

4 files changed, 606 insertions, 571 deletions

diff --git a/chart2/source/controller/dialogs/res_BarGeometry.cxx b/chart2/source/controller/dialogs/res_BarGeometry.cxx
index d067ae711978..c5f358d0d33b 100644
--- a/chart2/source/controller/dialogs/res_BarGeometry.cxx
+++ b/chart2/source/controller/dialogs/res_BarGeometry.cxx
@@ -17,7 +17,7 @@
  *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
  */
 
-#include "res_BarGeometry.hxx"
+#include <res_BarGeometry.hxx>
 #include <vcl/builder.hxx>
 #include <ResId.hxx>
 #include <chart.hrc>
diff --git a/chart2/source/controller/dialogs/tp_ChartType.cxx b/chart2/source/controller/dialogs/tp_ChartType.cxx
index bec21d752cf1..74b3c610d5b0 100644
--- a/chart2/source/controller/dialogs/tp_ChartType.cxx
+++ b/chart2/source/controller/dialogs/tp_ChartType.cxx
@@ -18,11 +18,12 @@
  */
 
 #include "tp_ChartType.hxx"
+#include <ChartResourceGroups.hxx>
 #include <strings.hrc>
 #include <ResId.hxx>
 #include <ChartModelHelper.hxx>
 #include <DiagramHelper.hxx>
-#include "res_BarGeometry.hxx"
+#include <res_BarGeometry.hxx>
 #include <ControllerLockGuard.hxx>
 #include <unonames.hxx>
 #include <com/sun/star/lang/XMultiServiceFactory.hpp>
@@ -38,571 +39,6 @@
 
 namespace chart
 {
-using namespace ::com::sun::star;
-using namespace ::com::sun::star::chart2;
-
-enum {
-    POS_3DSCHEME_SIMPLE    = 0,
-    POS_3DSCHEME_REALISTIC = 1
-};
-
-class Dim3DLookResourceGroup : public ChangingResource
-{
-public:
-    explicit Dim3DLookResourceGroup(weld::Builder* pBuilder);
-
-    void showControls( bool bShow );
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter );
-
-private:
-    DECL_LINK( Dim3DLookCheckHdl, weld::ToggleButton&, void );
-    DECL_LINK( SelectSchemeHdl, weld::ComboBox&, void );
-
-private:
-    std::unique_ptr<weld::CheckButton> m_xCB_3DLook;
-    std::unique_ptr<weld::ComboBox>  m_xLB_Scheme;
-};
-
-Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_xCB_3DLook(pBuilder->weld_check_button("3dlook"))
-    , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme"))
-{
-    m_xCB_3DLook->connect_toggled( LINK( this, Dim3DLookResourceGroup, Dim3DLookCheckHdl ) );
-    m_xLB_Scheme->connect_changed( LINK( this, Dim3DLookResourceGroup, SelectSchemeHdl ) );
-}
-
-void Dim3DLookResourceGroup::showControls( bool bShow )
-{
-    m_xCB_3DLook->show(bShow);
-    m_xLB_Scheme->show(bShow);
-}
-
-void Dim3DLookResourceGroup::fillControls( const ChartTypeParameter& rParameter )
-{
-    m_xCB_3DLook->set_active(rParameter.b3DLook);
-    m_xLB_Scheme->set_sensitive(rParameter.b3DLook);
-
-    if( rParameter.eThreeDLookScheme == ThreeDLookScheme_Simple )
-        m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE);
-    else if( rParameter.eThreeDLookScheme == ThreeDLookScheme_Realistic )
-        m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC);
-    else
-        m_xLB_Scheme->set_active(-1);
-}
-
-void Dim3DLookResourceGroup::fillParameter( ChartTypeParameter& rParameter )
-{
-    rParameter.b3DLook = m_xCB_3DLook->get_active();
-    const int nPos = m_xLB_Scheme->get_active();
-    if( nPos == POS_3DSCHEME_SIMPLE )
-        rParameter.eThreeDLookScheme = ThreeDLookScheme_Simple;
-    else if( nPos == POS_3DSCHEME_REALISTIC )
-        rParameter.eThreeDLookScheme = ThreeDLookScheme_Realistic;
-    else
-        rParameter.eThreeDLookScheme = ThreeDLookScheme_Unknown;
-}
-
-IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::ToggleButton&, void)
-{
-    if(m_pChangeListener)
-        m_pChangeListener->stateChanged(this);
-}
-
-IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void)
-{
-    if(m_pChangeListener)
-        m_pChangeListener->stateChanged(this);
-}
-
-class SortByXValuesResourceGroup : public ChangingResource
-{
-public:
-    explicit SortByXValuesResourceGroup(weld::Builder* pBuilder);
-
-    void showControls( bool bShow );
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter );
-
-private:
-    DECL_LINK(SortByXValuesCheckHdl, weld::ToggleButton&, void);
-
-private:
-    std::unique_ptr<weld::CheckButton> m_xCB_XValueSorting;
-};
-
-SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_xCB_XValueSorting(pBuilder->weld_check_button("sort"))
-{
-    m_xCB_XValueSorting->connect_toggled(LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl));
-}
-
-void SortByXValuesResourceGroup::showControls( bool bShow )
-{
-    m_xCB_XValueSorting->show(bShow);
-}
-
-void SortByXValuesResourceGroup::fillControls( const ChartTypeParameter& rParameter )
-{
-    m_xCB_XValueSorting->set_active(rParameter.bSortByXValues);
-}
-
-void SortByXValuesResourceGroup::fillParameter( ChartTypeParameter& rParameter )
-{
-    rParameter.bSortByXValues = m_xCB_XValueSorting->get_active();
-}
-
-IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::ToggleButton&, void)
-{
-    if(m_pChangeListener)
-        m_pChangeListener->stateChanged(this);
-}
-
-class StackingResourceGroup : public ChangingResource
-{
-public:
-    explicit StackingResourceGroup(weld::Builder* pBuilder);
-
-    void showControls( bool bShow, bool bShowDeepStacking );
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter );
-
-private:
-    DECL_LINK( StackingChangeHdl, weld::ToggleButton&, void );
-    DECL_LINK( StackingEnableHdl, weld::ToggleButton&, void );
-
-private:
-    std::unique_ptr<weld::CheckButton> m_xCB_Stacked;
-    std::unique_ptr<weld::RadioButton> m_xRB_Stack_Y;
-    std::unique_ptr<weld::RadioButton> m_xRB_Stack_Y_Percent;
-    std::unique_ptr<weld::RadioButton> m_xRB_Stack_Z;
-};
-
-StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_xCB_Stacked(pBuilder->weld_check_button("stack"))
-    , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop"))
-    , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent"))
-    , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep"))
-{
-    m_xCB_Stacked->connect_toggled( LINK( this, StackingResourceGroup, StackingEnableHdl ) );
-    m_xRB_Stack_Y->connect_toggled( LINK( this, StackingResourceGroup, StackingChangeHdl ) );
-    m_xRB_Stack_Y_Percent->connect_toggled( LINK( this, StackingResourceGroup, StackingChangeHdl ) );
-    m_xRB_Stack_Z->connect_toggled( LINK( this, StackingResourceGroup, StackingChangeHdl ) );
-}
-
-void StackingResourceGroup::showControls( bool bShow, bool bShowDeepStacking )
-{
-    m_xCB_Stacked->show(bShow);
-    m_xRB_Stack_Y->show(bShow);
-    m_xRB_Stack_Y_Percent->show(bShow);
-    m_xRB_Stack_Z->show(bShow&&bShowDeepStacking);
-}
-
-void StackingResourceGroup::fillControls( const ChartTypeParameter& rParameter )
-{
-    m_xCB_Stacked->set_active( rParameter.eStackMode!=GlobalStackMode_NONE
-        && rParameter.eStackMode!=GlobalStackMode_STACK_Z ); //todo remove this condition if z stacking radio button is really used
-    switch( rParameter.eStackMode )
-    {
-        case GlobalStackMode_STACK_Y:
-            m_xRB_Stack_Y->set_active(true);
-            break;
-        case GlobalStackMode_STACK_Y_PERCENT:
-            m_xRB_Stack_Y_Percent->set_active(true);
-            break;
-        case GlobalStackMode_STACK_Z:
-            //todo uncomment this condition if z stacking radio button is really used
-            /*
-            if( rParameter.b3DLook )
-                m_xRB_Stack_Z->set_active(true);
-            else
-            */
-                m_xRB_Stack_Y->set_active(true);
-            break;
-        default:
-            m_xRB_Stack_Y->set_active(true);
-            break;
-    }
-    //dis/enabling
-    m_xCB_Stacked->set_sensitive( !rParameter.bXAxisWithValues );
-    m_xRB_Stack_Y->set_sensitive( m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues );
-    m_xRB_Stack_Y_Percent->set_sensitive( m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues );
-    m_xRB_Stack_Z->set_sensitive( m_xCB_Stacked->get_active() && rParameter.b3DLook );
-}
-
-void StackingResourceGroup::fillParameter( ChartTypeParameter& rParameter )
-{
-    if(!m_xCB_Stacked->get_active())
-        rParameter.eStackMode = GlobalStackMode_NONE;
-    else if(m_xRB_Stack_Y->get_active())
-        rParameter.eStackMode = GlobalStackMode_STACK_Y;
-    else if(m_xRB_Stack_Y_Percent->get_active())
-        rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT;
-    else if(m_xRB_Stack_Z->get_active())
-        rParameter.eStackMode = GlobalStackMode_STACK_Z;
-}
-
-IMPL_LINK( StackingResourceGroup, StackingChangeHdl, weld::ToggleButton&, rRadio, void )
-{
-    //for each radio click there are coming two change events
-    //first uncheck of previous button -> ignore that call
-    //the second call gives the check of the new button
-    if (m_pChangeListener && rRadio.get_active())
-        m_pChangeListener->stateChanged(this);
-}
-
-IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::ToggleButton&, void)
-{
-    if( m_pChangeListener )
-        m_pChangeListener->stateChanged(this);
-}
-
-class SplinePropertiesDialog : public weld::GenericDialogController
-{
-public:
-    explicit SplinePropertiesDialog(weld::Window* pParent);
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter, bool bSmoothLines );
-
-private:
-    DECL_LINK(SplineTypeListBoxHdl, weld::ComboBox&, void);
-
-private:
-    std::unique_ptr<weld::ComboBox> m_xLB_Spline_Type;
-    std::unique_ptr<weld::SpinButton> m_xMF_SplineResolution;
-    std::unique_ptr<weld::Label> m_xFT_SplineOrder;
-    std::unique_ptr<weld::SpinButton> m_xMF_SplineOrder;
-};
-
-const sal_uInt16 CUBIC_SPLINE_POS = 0;
-const sal_uInt16 B_SPLINE_POS = 1;
-
-SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent)
-    : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog")
-    , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox"))
-    , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton"))
-    , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel"))
-    , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton"))
-{
-    m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
-
-    m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl));
-}
-
-void SplinePropertiesDialog::fillControls( const ChartTypeParameter& rParameter )
-{
-    switch(rParameter.eCurveStyle)
-    {
-    case CurveStyle_CUBIC_SPLINES:
-        m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
-        break;
-    case CurveStyle_B_SPLINES:
-        m_xLB_Spline_Type->set_active(B_SPLINE_POS);
-        break;
-    default:
-        m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
-        break;
-    }
-    m_xMF_SplineOrder->set_value( rParameter.nSplineOrder );
-    m_xMF_SplineResolution->set_value( rParameter.nCurveResolution );
-
-    //dis/enabling
-    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-}
-
-void SplinePropertiesDialog::fillParameter( ChartTypeParameter& rParameter, bool bSmoothLines )
-{
-    if(!bSmoothLines)
-        rParameter.eCurveStyle=CurveStyle_LINES;
-    else if(m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS)
-        rParameter.eCurveStyle=CurveStyle_CUBIC_SPLINES;
-    else if(m_xLB_Spline_Type->get_active() == B_SPLINE_POS)
-        rParameter.eCurveStyle=CurveStyle_B_SPLINES;
-
-    rParameter.nCurveResolution = m_xMF_SplineResolution->get_value();
-    rParameter.nSplineOrder = m_xMF_SplineOrder->get_value();
-}
-
-IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void)
-{
-    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-}
-
-class SteppedPropertiesDialog : public weld::GenericDialogController
-{
-public:
-    explicit SteppedPropertiesDialog(weld::Window* pParent);
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter, bool bSteppedLines );
-
-private:
-    std::unique_ptr<weld::RadioButton> m_xRB_Start;
-    std::unique_ptr<weld::RadioButton> m_xRB_End;
-    std::unique_ptr<weld::RadioButton> m_xRB_CenterX;
-    std::unique_ptr<weld::RadioButton> m_xRB_CenterY;
-};
-
-SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent)
-    : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog")
-    , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb"))
-    , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb"))
-    , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb"))
-    , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb"))
-{
-    m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
-}
-
-void SteppedPropertiesDialog::fillControls( const ChartTypeParameter& rParameter )
-{
-    switch(rParameter.eCurveStyle)
-    {
-        case CurveStyle_STEP_END:
-            m_xRB_End->set_active(true);
-            break;
-        case CurveStyle_STEP_CENTER_X:
-            m_xRB_CenterX->set_active(true);
-            break;
-        case CurveStyle_STEP_CENTER_Y:
-            m_xRB_CenterY->set_active(true);
-            break;
-        default: // includes CurveStyle_STEP_START
-            m_xRB_Start->set_active(true);
-            break;
-    }
-}
-void SteppedPropertiesDialog::fillParameter( ChartTypeParameter& rParameter, bool bSteppedLines )
-{
-    if (!bSteppedLines)
-        rParameter.eCurveStyle=CurveStyle_LINES;
-    else if(m_xRB_CenterY->get_active())
-        rParameter.eCurveStyle=CurveStyle_STEP_CENTER_Y;
-    else if(m_xRB_Start->get_active())
-        rParameter.eCurveStyle=CurveStyle_STEP_START;
-    else if(m_xRB_End->get_active())
-        rParameter.eCurveStyle=CurveStyle_STEP_END;
-    else if(m_xRB_CenterX->get_active())
-        rParameter.eCurveStyle=CurveStyle_STEP_CENTER_X;
-}
-
-#define POS_LINETYPE_STRAIGHT    0
-#define POS_LINETYPE_SMOOTH      1
-#define POS_LINETYPE_STEPPED     2
-
-class SplineResourceGroup : public ChangingResource
-{
-public:
-    explicit SplineResourceGroup(weld::Builder* pBuilder, TabPageParent pParent);
-
-    void showControls( bool bShow );
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter );
-
-private:
-    DECL_LINK( LineTypeChangeHdl, weld::ComboBox&, void );
-    DECL_LINK( SplineDetailsDialogHdl, weld::Button&, void );
-    DECL_LINK( SteppedDetailsDialogHdl, weld::Button&, void );
-    SplinePropertiesDialog& getSplinePropertiesDialog();
-    SteppedPropertiesDialog& getSteppedPropertiesDialog();
-
-private:
-    TabPageParent m_pParent;
-    std::unique_ptr<weld::Label> m_xFT_LineType;
-    std::unique_ptr<weld::ComboBox> m_xLB_LineType;
-    std::unique_ptr<weld::Button> m_xPB_DetailsDialog;
-    std::unique_ptr<SplinePropertiesDialog> m_xSplinePropertiesDialog;
-    std::unique_ptr<SteppedPropertiesDialog> m_xSteppedPropertiesDialog;
-};
-
-SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, TabPageParent pParent)
-    : ChangingResource()
-    , m_pParent(pParent)
-    , m_xFT_LineType(pBuilder->weld_label("linetypeft"))
-    , m_xLB_LineType(pBuilder->weld_combo_box("linetype"))
-    , m_xPB_DetailsDialog(pBuilder->weld_button("properties"))
-{
-    m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl));
-}
-
-SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog()
-{
-    if (!m_xSplinePropertiesDialog)
-    {
-        m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent.GetFrameWeld()));
-    }
-    return *m_xSplinePropertiesDialog;
-}
-
-SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog()
-{
-    if (!m_xSteppedPropertiesDialog)
-    {
-        m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent.GetFrameWeld()));
-    }
-    return *m_xSteppedPropertiesDialog;
-}
-
-void SplineResourceGroup::showControls( bool bShow )
-{
-    m_xFT_LineType->show(bShow);
-    m_xLB_LineType->show(bShow);
-    m_xPB_DetailsDialog->show(bShow);
-}
-
-void SplineResourceGroup::fillControls( const ChartTypeParameter& rParameter )
-{
-    switch (rParameter.eCurveStyle)
-    {
-        case CurveStyle_LINES:
-            m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT);
-            m_xPB_DetailsDialog->set_sensitive(false);
-            break;
-        case CurveStyle_CUBIC_SPLINES:
-        case CurveStyle_B_SPLINES:
-            m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
-            m_xPB_DetailsDialog->set_sensitive(true);
-            m_xPB_DetailsDialog->connect_clicked( LINK( this, SplineResourceGroup, SplineDetailsDialogHdl ) );
-            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
-            getSplinePropertiesDialog().fillControls( rParameter );
-            break;
-        case CurveStyle_STEP_START:
-        case CurveStyle_STEP_END:
-        case CurveStyle_STEP_CENTER_X:
-        case CurveStyle_STEP_CENTER_Y:
-            m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
-            m_xPB_DetailsDialog->set_sensitive(true);
-            m_xPB_DetailsDialog->connect_clicked( LINK( this, SplineResourceGroup, SteppedDetailsDialogHdl ) );
-            m_xPB_DetailsDialog->set_tooltip_text( SchResId(STR_DLG_STEPPED_LINE_PROPERTIES) );
-            getSteppedPropertiesDialog().fillControls( rParameter );
-            break;
-        default:
-            m_xLB_LineType->set_active(-1);
-            m_xPB_DetailsDialog->set_sensitive(false);
-    }
-}
-void SplineResourceGroup::fillParameter( ChartTypeParameter& rParameter )
-{
-    switch (m_xLB_LineType->get_active())
-    {
-        case POS_LINETYPE_SMOOTH:
-            getSplinePropertiesDialog().fillParameter( rParameter, true );
-            break;
-        case POS_LINETYPE_STEPPED:
-            getSteppedPropertiesDialog().fillParameter( rParameter, true );
-            break;
-        default: // includes POS_LINETYPE_STRAIGHT
-            rParameter.eCurveStyle = CurveStyle_LINES;
-            break;
-    }
-}
-
-IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void)
-{
-    if( m_pChangeListener )
-        m_pChangeListener->stateChanged(this);
-}
-
-IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void)
-{
-
-    ChartTypeParameter aOldParameter;
-    getSplinePropertiesDialog().fillParameter( aOldParameter, m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH );
-
-    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
-    m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
-    if (getSplinePropertiesDialog().run() == RET_OK)
-    {
-        if( m_pChangeListener )
-            m_pChangeListener->stateChanged(this);
-    }
-    else
-    {
-        //restore old state:
-        m_xLB_LineType->set_active( iOldLineTypePos );
-        getSplinePropertiesDialog().fillControls( aOldParameter );
-    }
-}
-
-IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void)
-{
-
-    ChartTypeParameter aOldParameter;
-    getSteppedPropertiesDialog().fillParameter( aOldParameter, m_xLB_LineType->get_active() == POS_LINETYPE_STEPPED );
-
-    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
-    m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
-    if (getSteppedPropertiesDialog().run() == RET_OK)
-    {
-        if( m_pChangeListener )
-            m_pChangeListener->stateChanged(this);
-    }
-    else
-    {
-        //restore old state:
-        m_xLB_LineType->set_active(iOldLineTypePos);
-        getSteppedPropertiesDialog().fillControls( aOldParameter );
-    }
-}
-
-class GeometryResourceGroup : public ChangingResource
-{
-public:
-    explicit GeometryResourceGroup(weld::Builder* pBuilder);
-
-    void showControls( bool bShow );
-
-    void fillControls( const ChartTypeParameter& rParameter );
-    void fillParameter( ChartTypeParameter& rParameter );
-
-private:
-    DECL_LINK( GeometryChangeHdl, weld::TreeView&, void );
-
-private:
-    BarGeometryResources m_aGeometryResources;
-};
-
-GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_aGeometryResources(pBuilder)
-{
-    m_aGeometryResources.connect_changed( LINK( this, GeometryResourceGroup, GeometryChangeHdl ) );
-}
-
-void GeometryResourceGroup::showControls(bool bShow)
-{
-    m_aGeometryResources.show(bShow);
-}
-
-void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter)
-{
-    sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D);
-    m_aGeometryResources.select(nGeometry3D);
-    m_aGeometryResources.set_sensitive(rParameter.b3DLook);
-}
-
-void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter)
-{
-    rParameter.nGeometry3D = 1;
-    int nSelected = m_aGeometryResources.get_selected_index();
-    if (nSelected != -1)
-        rParameter.nGeometry3D = nSelected;
-}
-
-IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void)
-{
-    if( m_pChangeListener )
-        m_pChangeListener->stateChanged(this);
-}
 
 ChartTypeTabPage::ChartTypeTabPage(TabPageParent pParent , const uno::Reference< XChartDocument >& xChartModel,
                                    bool bShowDescription)
diff --git a/chart2/source/inc/ChartResourceGroups.hxx b/chart2/source/inc/ChartResourceGroups.hxx
new file mode 100644
index 000000000000..01b23c732141
--- /dev/null
+++ b/chart2/source/inc/ChartResourceGroups.hxx
@@ -0,0 +1,600 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_CHART2_SOURCE_CHARTRESOURCEGROUPS_HXX
+#define INCLUDED_CHART2_SOURCE_CHARTRESOURCEGROUPS_HXX
+
+#include <strings.hrc>
+#include <ResId.hxx>
+
+#include <res_BarGeometry.hxx>
+
+namespace chart
+{
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::chart2;
+
+enum
+{
+    POS_3DSCHEME_SIMPLE = 0,
+    POS_3DSCHEME_REALISTIC = 1
+};
+
+class Dim3DLookResourceGroup : public ChangingResource
+{
+public:
+    explicit Dim3DLookResourceGroup(weld::Builder* pBuilder);
+
+    void showControls(bool bShow);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter);
+
+private:
+    DECL_LINK(Dim3DLookCheckHdl, weld::ToggleButton&, void);
+    DECL_LINK(SelectSchemeHdl, weld::ComboBox&, void);
+
+private:
+    std::unique_ptr<weld::CheckButton> m_xCB_3DLook;
+    std::unique_ptr<weld::ComboBox> m_xLB_Scheme;
+};
+
+Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_xCB_3DLook(pBuilder->weld_check_button("3dlook"))
+    , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme"))
+{
+    m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl));
+    m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl));
+}
+
+void Dim3DLookResourceGroup::showControls(bool bShow)
+{
+    m_xCB_3DLook->show(bShow);
+    m_xLB_Scheme->show(bShow);
+}
+
+void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_3DLook->set_active(rParameter.b3DLook);
+    m_xLB_Scheme->set_sensitive(rParameter.b3DLook);
+
+    if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Simple)
+        m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE);
+    else if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Realistic)
+        m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC);
+    else
+        m_xLB_Scheme->set_active(-1);
+}
+
+void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.b3DLook = m_xCB_3DLook->get_active();
+    const int nPos = m_xLB_Scheme->get_active();
+    if (nPos == POS_3DSCHEME_SIMPLE)
+        rParameter.eThreeDLookScheme = ThreeDLookScheme_Simple;
+    else if (nPos == POS_3DSCHEME_REALISTIC)
+        rParameter.eThreeDLookScheme = ThreeDLookScheme_Realistic;
+    else
+        rParameter.eThreeDLookScheme = ThreeDLookScheme_Unknown;
+}
+
+IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::ToggleButton&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged(this);
+}
+
+IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged(this);
+}
+
+class SortByXValuesResourceGroup : public ChangingResource
+{
+public:
+    explicit SortByXValuesResourceGroup(weld::Builder* pBuilder);
+
+    void showControls(bool bShow);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter);
+
+private:
+    DECL_LINK(SortByXValuesCheckHdl, weld::ToggleButton&, void);
+
+private:
+    std::unique_ptr<weld::CheckButton> m_xCB_XValueSorting;
+};
+
+SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_xCB_XValueSorting(pBuilder->weld_check_button("sort"))
+{
+    m_xCB_XValueSorting->connect_toggled(
+        LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl));
+}
+
+void SortByXValuesResourceGroup::showControls(bool bShow) { m_xCB_XValueSorting->show(bShow); }
+
+void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_XValueSorting->set_active(rParameter.bSortByXValues);
+}
+
+void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.bSortByXValues = m_xCB_XValueSorting->get_active();
+}
+
+IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::ToggleButton&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged(this);
+}
+
+class StackingResourceGroup : public ChangingResource
+{
+public:
+    explicit StackingResourceGroup(weld::Builder* pBuilder);
+
+    void showControls(bool bShow, bool bShowDeepStacking);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter);
+
+private:
+    DECL_LINK(StackingChangeHdl, weld::ToggleButton&, void);
+    DECL_LINK(StackingEnableHdl, weld::ToggleButton&, void);
+
+private:
+    std::unique_ptr<weld::CheckButton> m_xCB_Stacked;
+    std::unique_ptr<weld::RadioButton> m_xRB_Stack_Y;
+    std::unique_ptr<weld::RadioButton> m_xRB_Stack_Y_Percent;
+    std::unique_ptr<weld::RadioButton> m_xRB_Stack_Z;
+};
+
+StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_xCB_Stacked(pBuilder->weld_check_button("stack"))
+    , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop"))
+    , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent"))
+    , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep"))
+{
+    m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl));
+    m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+    m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+    m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+}
+
+void StackingResourceGroup::showControls(bool bShow, bool bShowDeepStacking)
+{
+    m_xCB_Stacked->show(bShow);
+    m_xRB_Stack_Y->show(bShow);
+    m_xRB_Stack_Y_Percent->show(bShow);
+    m_xRB_Stack_Z->show(bShow && bShowDeepStacking);
+}
+
+void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_Stacked->set_active(
+        rParameter.eStackMode != GlobalStackMode_NONE
+        && rParameter.eStackMode
+               != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used
+    switch (rParameter.eStackMode)
+    {
+        case GlobalStackMode_STACK_Y:
+            m_xRB_Stack_Y->set_active(true);
+            break;
+        case GlobalStackMode_STACK_Y_PERCENT:
+            m_xRB_Stack_Y_Percent->set_active(true);
+            break;
+        case GlobalStackMode_STACK_Z:
+            //todo uncomment this condition if z stacking radio button is really used
+            /*
+            if( rParameter.b3DLook )
+                m_xRB_Stack_Z->set_active(true);
+            else
+            */
+            m_xRB_Stack_Y->set_active(true);
+            break;
+        default:
+            m_xRB_Stack_Y->set_active(true);
+            break;
+    }
+    //dis/enabling
+    m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues);
+    m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues);
+    m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active()
+                                         && !rParameter.bXAxisWithValues);
+    m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook);
+}
+
+void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    if (!m_xCB_Stacked->get_active())
+        rParameter.eStackMode = GlobalStackMode_NONE;
+    else if (m_xRB_Stack_Y->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Y;
+    else if (m_xRB_Stack_Y_Percent->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT;
+    else if (m_xRB_Stack_Z->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Z;
+}
+
+IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::ToggleButton&, rRadio, void)
+{
+    //for each radio click there are coming two change events
+    //first uncheck of previous button -> ignore that call
+    //the second call gives the check of the new button
+    if (m_pChangeListener && rRadio.get_active())
+        m_pChangeListener->stateChanged(this);
+}
+
+IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::ToggleButton&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged(this);
+}
+
+class SplinePropertiesDialog : public weld::GenericDialogController
+{
+public:
+    explicit SplinePropertiesDialog(weld::Window* pParent);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines);
+
+private:
+    DECL_LINK(SplineTypeListBoxHdl, weld::ComboBox&, void);
+
+private:
+    std::unique_ptr<weld::ComboBox> m_xLB_Spline_Type;
+    std::unique_ptr<weld::SpinButton> m_xMF_SplineResolution;
+    std::unique_ptr<weld::Label> m_xFT_SplineOrder;
+    std::unique_ptr<weld::SpinButton> m_xMF_SplineOrder;
+};
+
+const sal_uInt16 CUBIC_SPLINE_POS = 0;
+const sal_uInt16 B_SPLINE_POS = 1;
+
+SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent)
+    : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog")
+    , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox"))
+    , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton"))
+    , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel"))
+    , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton"))
+{
+    m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
+
+    m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl));
+}
+
+void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_CUBIC_SPLINES:
+            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
+            break;
+        case CurveStyle_B_SPLINES:
+            m_xLB_Spline_Type->set_active(B_SPLINE_POS);
+            break;
+        default:
+            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
+            break;
+    }
+    m_xMF_SplineOrder->set_value(rParameter.nSplineOrder);
+    m_xMF_SplineResolution->set_value(rParameter.nCurveResolution);
+
+    //dis/enabling
+    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+}
+
+void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines)
+{
+    if (!bSmoothLines)
+        rParameter.eCurveStyle = CurveStyle_LINES;
+    else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS)
+        rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES;
+    else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS)
+        rParameter.eCurveStyle = CurveStyle_B_SPLINES;
+
+    rParameter.nCurveResolution = m_xMF_SplineResolution->get_value();
+    rParameter.nSplineOrder = m_xMF_SplineOrder->get_value();
+}
+
+IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void)
+{
+    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+}
+
+class SteppedPropertiesDialog : public weld::GenericDialogController
+{
+public:
+    explicit SteppedPropertiesDialog(weld::Window* pParent);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines);
+
+private:
+    std::unique_ptr<weld::RadioButton> m_xRB_Start;
+    std::unique_ptr<weld::RadioButton> m_xRB_End;
+    std::unique_ptr<weld::RadioButton> m_xRB_CenterX;
+    std::unique_ptr<weld::RadioButton> m_xRB_CenterY;
+};
+
+SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent)
+    : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog")
+    , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb"))
+    , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb"))
+    , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb"))
+    , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb"))
+{
+    m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
+}
+
+void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_STEP_END:
+            m_xRB_End->set_active(true);
+            break;
+        case CurveStyle_STEP_CENTER_X:
+            m_xRB_CenterX->set_active(true);
+            break;
+        case CurveStyle_STEP_CENTER_Y:
+            m_xRB_CenterY->set_active(true);
+            break;
+        default: // includes CurveStyle_STEP_START
+            m_xRB_Start->set_active(true);
+            break;
+    }
+}
+void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines)
+{
+    if (!bSteppedLines)
+        rParameter.eCurveStyle = CurveStyle_LINES;
+    else if (m_xRB_CenterY->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y;
+    else if (m_xRB_Start->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_START;
+    else if (m_xRB_End->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_END;
+    else if (m_xRB_CenterX->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X;
+}
+
+#define POS_LINETYPE_STRAIGHT 0
+#define POS_LINETYPE_SMOOTH 1
+#define POS_LINETYPE_STEPPED 2
+
+class SplineResourceGroup : public ChangingResource
+{
+public:
+    explicit SplineResourceGroup(weld::Builder* pBuilder, TabPageParent pParent);
+
+    void showControls(bool bShow);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter);
+
+private:
+    DECL_LINK(LineTypeChangeHdl, weld::ComboBox&, void);
+    DECL_LINK(SplineDetailsDialogHdl, weld::Button&, void);
+    DECL_LINK(SteppedDetailsDialogHdl, weld::Button&, void);
+    SplinePropertiesDialog& getSplinePropertiesDialog();
+    SteppedPropertiesDialog& getSteppedPropertiesDialog();
+
+private:
+    TabPageParent m_pParent;
+    std::unique_ptr<weld::Label> m_xFT_LineType;
+    std::unique_ptr<weld::ComboBox> m_xLB_LineType;
+    std::unique_ptr<weld::Button> m_xPB_DetailsDialog;
+    std::unique_ptr<SplinePropertiesDialog> m_xSplinePropertiesDialog;
+    std::unique_ptr<SteppedPropertiesDialog> m_xSteppedPropertiesDialog;
+};
+
+SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, TabPageParent pParent)
+    : ChangingResource()
+    , m_pParent(pParent)
+    , m_xFT_LineType(pBuilder->weld_label("linetypeft"))
+    , m_xLB_LineType(pBuilder->weld_combo_box("linetype"))
+    , m_xPB_DetailsDialog(pBuilder->weld_button("properties"))
+{
+    m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl));
+}
+
+SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog()
+{
+    if (!m_xSplinePropertiesDialog)
+    {
+        m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent.GetFrameWeld()));
+    }
+    return *m_xSplinePropertiesDialog;
+}
+
+SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog()
+{
+    if (!m_xSteppedPropertiesDialog)
+    {
+        m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent.GetFrameWeld()));
+    }
+    return *m_xSteppedPropertiesDialog;
+}
+
+void SplineResourceGroup::showControls(bool bShow)
+{
+    m_xFT_LineType->show(bShow);
+    m_xLB_LineType->show(bShow);
+    m_xPB_DetailsDialog->show(bShow);
+}
+
+void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_LINES:
+            m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT);
+            m_xPB_DetailsDialog->set_sensitive(false);
+            break;
+        case CurveStyle_CUBIC_SPLINES:
+        case CurveStyle_B_SPLINES:
+            m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
+            m_xPB_DetailsDialog->set_sensitive(true);
+            m_xPB_DetailsDialog->connect_clicked(
+                LINK(this, SplineResourceGroup, SplineDetailsDialogHdl));
+            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
+            getSplinePropertiesDialog().fillControls(rParameter);
+            break;
+        case CurveStyle_STEP_START:
+        case CurveStyle_STEP_END:
+        case CurveStyle_STEP_CENTER_X:
+        case CurveStyle_STEP_CENTER_Y:
+            m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
+            m_xPB_DetailsDialog->set_sensitive(true);
+            m_xPB_DetailsDialog->connect_clicked(
+                LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl));
+            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
+            getSteppedPropertiesDialog().fillControls(rParameter);
+            break;
+        default:
+            m_xLB_LineType->set_active(-1);
+            m_xPB_DetailsDialog->set_sensitive(false);
+    }
+}
+void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    switch (m_xLB_LineType->get_active())
+    {
+        case POS_LINETYPE_SMOOTH:
+            getSplinePropertiesDialog().fillParameter(rParameter, true);
+            break;
+        case POS_LINETYPE_STEPPED:
+            getSteppedPropertiesDialog().fillParameter(rParameter, true);
+            break;
+        default: // includes POS_LINETYPE_STRAIGHT
+            rParameter.eCurveStyle = CurveStyle_LINES;
+            break;
+    }
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged(this);
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void)
+{
+    ChartTypeParameter aOldParameter;
+    getSplinePropertiesDialog().fillParameter(aOldParameter,
+                                              m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH);
+
+    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
+    m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
+    if (getSplinePropertiesDialog().run() == RET_OK)
+    {
+        if (m_pChangeListener)
+            m_pChangeListener->stateChanged(this);
+    }
+    else
+    {
+        //restore old state:
+        m_xLB_LineType->set_active(iOldLineTypePos);
+        getSplinePropertiesDialog().fillControls(aOldParameter);
+    }
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void)
+{
+    ChartTypeParameter aOldParameter;
+    getSteppedPropertiesDialog().fillParameter(aOldParameter, m_xLB_LineType->get_active()
+                                                                  == POS_LINETYPE_STEPPED);
+
+    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
+    m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
+    if (getSteppedPropertiesDialog().run() == RET_OK)
+    {
+        if (m_pChangeListener)
+            m_pChangeListener->stateChanged(this);
+    }
+    else
+    {
+        //restore old state:
+        m_xLB_LineType->set_active(iOldLineTypePos);
+        getSteppedPropertiesDialog().fillControls(aOldParameter);
+    }
+}
+
+class GeometryResourceGroup : public ChangingResource
+{
+public:
+    explicit GeometryResourceGroup(weld::Builder* pBuilder);
+
+    void showControls(bool bShow);
+
+    void fillControls(const ChartTypeParameter& rParameter);
+    void fillParameter(ChartTypeParameter& rParameter);
+
+private:
+    DECL_LINK(GeometryChangeHdl, weld::TreeView&, void);
+
+private:
+    BarGeometryResources m_aGeometryResources;
+};
+
+GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_aGeometryResources(pBuilder)
+{
+    m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl));
+}
+
+void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.show(bShow); }
+
+void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D);
+    m_aGeometryResources.select(nGeometry3D);
+    m_aGeometryResources.set_sensitive(rParameter.b3DLook);
+}
+
+void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.nGeometry3D = 1;
+    int nSelected = m_aGeometryResources.get_selected_index();
+    if (nSelected != -1)
+        rParameter.nGeometry3D = nSelected;
+}
+
+IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged(this);
+}
+
+} //namespace chart
+#endif
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/chart2/source/controller/dialogs/res_BarGeometry.hxx b/chart2/source/inc/res_BarGeometry.hxx
index e63bf9160ee2..2de887530d83 100644
--- a/chart2/source/controller/dialogs/res_BarGeometry.hxx
+++ b/chart2/source/inc/res_BarGeometry.hxx
@@ -23,19 +23,18 @@
 
 namespace chart
 {
-
 class BarGeometryResources
 {
 public:
     explicit BarGeometryResources(weld::Builder* pParent);
 
-    void show( bool bShow );
-    void set_sensitive( bool bEnable );
+    void show(bool bShow);
+    void set_sensitive(bool bEnable);
 
     sal_Int32 get_selected_index() const;
     void select(sal_Int32 nPos);
 
-    void connect_changed(const Link<weld::TreeView&,void>& rLink);
+    void connect_changed(const Link<weld::TreeView&, void>& rLink);
 
 private:
     std::unique_ptr<weld::Label> m_xFT_Geometry;