diff options
4 files changed, 956 insertions, 1123 deletions
diff --git a/ChangeLog b/ChangeLog
index 77ac03f9..cbf0e5d2 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,945 @@
+=== release 1.11.1 ===
+2017-01-12 Sebastian Dröge <>
+ *
+ releasing 1.11.1
+2017-01-12 12:49:55 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapiutils.c:
+ vaapi: bump ifdef to API 0.40.0 for log redirect
+ vaSetInfoCallback() is not released yet. It is going to appear in
+ VA-API 0.40.0
+2017-01-12 13:45:29 +0200 Sebastian Dröge <>
+ * gst-libs/gst/vaapi/gstvaapiutils.c:
+ vaapiutils: Fix compilation with latest and previous libva releases
+ vaSetInfoCallback() was defined after 0.39.4 / 1.7.3, so check for
+ 0.39.5 instead.
+2017-01-11 16:04:24 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapidisplay.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay_drm.c:
+ * gst-libs/gst/vaapi/gstvaapiutils.c:
+ * gst-libs/gst/vaapi/gstvaapiutils.h:
+ libs: display: redirect logging at initialize
+ Redirect libva's logs to GStreamer logging mechanism. This is
+ particularly useful when VA is initialized, because it always logs
+ out the drivers details.
+ In order to achieve this a new helper function was added as a wrapper
+ for the vaInitialize() function.
+2017-01-10 15:15:31 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: provide at least two buffers in sink pool
+ Adds two buffers as the default value of minimum buffer.
+ This would be used when creating and proposing vaapi bufferpool for
+ sink pad, hence the upstream element will keep, at least, these two
+ buffers.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2017-01-10 13:49:27 +0900 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapidecoder_h264.c:
+ libs: decoder: h264: don't update cloned attributes
+ If the frame is a cloned picture, its PTS comes from its parent
+ picture. In addition, the base decoder doesn't set a valid PTS to
+ the frame corresponding to the cloned picture.
+2017-01-09 19:25:24 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: check for display
+ This patch fixes the check of display, rather than check for the
+ meta, which it is known it exists.
+2017-01-09 16:23:56 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: rename dmabuf allocator parameters
+ Rename the parameters 'vip' and 'flags' to 'alloc_info' and
+ 'surface_alloc_flags' respectively. The purpose of this change is
+ to auto-document those parameters.
+ Also, aligned to this patch, the local 'alloc_info' variable was
+ renamed as 'surface_info', because it stores the possible surface's
+ video info, not the allocate one.
+2017-01-09 16:18:32 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: rename vip to alloc_info parameter
+ In order to auto-document the code, this patch renames the 'vip'
+ parameter in the functions related to gst_vaapi_video_allocator_new ()
+ to 'alloc_info', since it declares the allocation video info from
+ the vaapi buffer pool.
+2017-01-09 16:08:17 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: use GST_VIDEO_INFO_FORMAT_STRING()
+ Use the existing local macro GST_VIDEO_INFO_FORMAT_STRING() to get
+ the video format string.
+2017-01-09 12:51:11 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: unroll gst_vaapi_surface_new_with_format()
+ gst_vaapi_surface_new_with_format() is a wrapper for
+ gst_vaapi_surface_new_full (). In this case, the former is simpler
+ than the first. This patch changes that.
+2017-01-04 19:23:06 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapipostproc.c:
+ vaapipostproc: notify if src pad caps changed
+ If src pad caps have changed, it needs to notify it downstream. In
+ addition, do not set passthrough if they have changed.
+ Otherwise, transform sometimes starts processing before caps change.
+ The passthrough value will be set in fixate later in this case.
+2016-12-14 15:51:01 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecodebin.c:
+ vaapidecodebin: capsfilter to optimize negotiation
+ Add a capsfilter forcing the caps
+ "video/x-raw(memory:VASurface), format=(string)NV12" between the
+ queue and the vaapipostproc so no renegotiation is required.
+2016-12-21 17:38:07 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: fail surface/image configuration
+ To detect and handle errors during allocator_configure_surface_info()
+ and allocator_conigure_image_info().
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-12-21 17:50:41 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapisink.c:
+ vaapisink: ensures raw caps at start()
+ Calls gst_vaapi_plugin_base_get_allowed_raw_caps() at start() to avoid
+ race conditions at get_caps(), especially with multiple src elements.
+2016-12-09 14:51:52 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapisurface_drm.c:
+ libs: surface: fix error handling code style
+2016-12-09 16:14:14 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: add gst_video_info_update_from_surface()
+ With this function is possible to refactor and remove duplicated code
+ between dmabuf configuration and direct rendering/uploading
+ configuration.
+2016-12-09 15:51:32 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: no log object at initialization
+ When an instance of GstVaapiVideoAllocator fails at initializing, the
+ log message should not include the allocator's object, because it is
+ going to be unrefed.
+2016-12-09 17:56:02 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ vaapidecode: lock stream when setting caps
+2016-12-09 17:42:42 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ Revert "vaapidecode: implement negotiate() vmethod"
+ This reverts commit 3285121181295c544480fc6ba756845b16285d30.
+ videodecode's negotiate() vmethod is also called when events arrive,
+ but this would mean that the proper configuration of sink pad might
+ not be complete, thus we should not update the src pad.
+ Let's keep the old non-vmethod negotitate().
+2016-12-07 16:52:35 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapi.c:
+ Revert "encoders: demote to RANK_NONE since not fit for autoplugging yet"
+ This reverts commit f182b8be2ba05965e6d31a4d380d6563b9b53a77.
+2016-12-01 18:57:10 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapiencode.c:
+ * gst/vaapi/gstvaapiencode.h:
+ vaapiencode: get surface formats in get_caps()
+ Query for the supported surface formats in config at get_caps() vmethod.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-12-07 11:26:37 +0100 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapiencoder.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder.h:
+ libs: encoder: add gst_vaapi_encoder_get_surface_formats()
+ This method will return the valid surface formats in the current
+ config. If the are no VAConfig it is created with the information
+ available.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-12-07 11:10:42 +0100 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapiencoder.c:
+ libs: encoder: split set_context_info()
+ Split set_context_info() adding init_context_info() which only
+ initialises the GstVaapiContextInfo structure inside GstVaapiEncoder
+ required for VAConfig.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-12-02 09:30:52 +0900 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapicontext.c:
+ libs: context: skip VAContext if no frame size
+ If GstVaapiContextInfo has just initial information, without frame's
+ width and height, skip the creation of the VAContext, just keep the
+ VAConfig.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-12-02 09:28:07 +0900 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapicontext.c:
+ libs: context: split context_create()
+ Split the funcion context_create() into context_create() and
+ config_create().
+ Decoupling VAConfig and VAContext during context creation, we could
+ query the VAConfig for the supported surface's formats without creating
+ a VAContext.
+2016-12-06 17:33:42 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapidisplay_drm.c:
+ libs: drm: find render node in hybrid system
+ Originally the drm backend only tried to open the first render node
+ found. But in hybrid system this first render node might not support
+ VA-API (propietary Nvidia driver, for example).
+ This patch tries all the available nodes until a finding one with a
+ VA-API supported driver.
+ Original-patch-by: Stirling Westrup <> and
+ Reza Razavi <>
+2016-11-14 17:45:55 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: refactor code for readability
+ Added the inlined function allocator_configure_pools() moving out code
+ from gst_vaapi_video_allocator_new() to make clear that it is a
+ post-initalization of the object.
+2016-11-14 17:40:37 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: log error if not VA image
+ Log an error message if the test image for surface downloading
+ cannot be allocated or mapped.
+2016-11-14 17:33:41 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: remove unused macros
+ These macros are not used. Let us remove them.
+2016-11-11 19:45:45 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: rename video for allocation_info
+ Since video_info stores the GstVideoInfo of the allocation caps,
+ it is clear if we rename it as allocation_info, to distinguish it
+ later from negotiation_info.
+2016-10-19 15:27:03 +0100 Julien Isorce <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: add real GstVaapiDmaBufAllocator
+ Instead of defining GstVaapiDmaBufAllocator as a hackish decorator of
+ GstDmaBufAllocator, now, since the expose of the GstDmaBufAllocator's
+ GType, GstVaapiDmaBufAllocator is a full feature GstAllocator inherited
+ from GstDmaBufAllocator.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-10-19 15:30:09 +0100 Julien Isorce <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: errors in gst_vaapi_dmabuf_allocator_new()
+ Add a helper function to initialize the gst_debug_vaapivideomemory,
+ to use it either by the GstVaapiVideoAllocatorClass or
+ GstVaapiDmabufAllocator (which is a decorator of GstDmaBufAllocator).
+ Later, log possible errors when calling gst_vaapi_dmabuf_allocator_new ()
+2016-11-29 15:14:32 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapiencode.c:
+ vaapiencode: release internal encoder at stop()
+ As the internal encoder is created at start(), let's release it at
+ stop() vmethod, to be consistent.
+ gst_vaapiencode_destroy() is called since it also resets the input and
+ output states, which is something that the base class does internally
+ after calling stop() vmethod.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+2016-12-03 08:20:56 +0100 Edward Hervey <>
+ * common:
+ Automatic update of common submodule
+ From f49c55e to 39ac2f5
+2016-11-29 14:59:02 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapiencode.c:
+ vaapiencode: call ensure_encoder() at start()
+ Currently, specific encoder is created during set_format(). This might
+ lead to race condition when creating profiles with multiple encoders.
+ This patch moves ensure_encoder() call to start() vmethod to ensure
+ avoiding the race condition.
+2016-11-21 19:29:22 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecodebin.c:
+ vaapidecodebin: bring back dynamic configuration
+ In commit ca0c3fd6 we remove the dynamic configuration if the bin
+ because we assumed that the bin will be always static as it is
+ registered.
+ Nonetheless we were wrong, because it is possible to request, with a
+ property, to avoid the use of the post-processor.
+ Since we want to add a way to disable the post-processor through
+ environment variables, this remove feature is required again.
+ If the environment variable GST_VAAPI_DISABLE_VPP is defined the
+ postprocessor inside of the vaapidecodebin is disabled, then
+ vaapidecodebin is an alias of the old vaapidecode.
+2016-11-21 18:25:18 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ vaapidecode: implement negotiate() vmethod
+ Instead of decorating the negotiate() method, let us override it,
+ so the stream is locked while called.
+2016-11-26 11:27:26 +0000 Tim-Philipp Müller <>
+ * .gitmodules:
+ common: use https protocol for common submodule
+2016-11-24 21:17:54 +0100 Dominique Leuenberger <>
+ * gst-libs/gst/vaapi/
+ build: add LIBVA_WAYLAND_CFLAGS to libgstvaapiegl
+ In case libva-wayland has its headers not installed in default
+ locations (like /usr/include), the build fails to include "wayland-client.h":
+ CC libgstvaapi_egl_la-gstvaapiutils_egl.lo
+ In file included from gstvaapidisplay_wayland.h:27:0,
+ from gstvaapidisplay_egl.c:35:
+ /usr/include/va/va_wayland.h:31:28: fatal error: wayland-client.h: No such file or directory
+ #include <wayland-client.h>
+ As we already passed VA_CLAGS, /usr/include/va/va_wayland.h could be found, but it is
+ our fault not to instruct the system that we ALSO care for va_wayland. We correctly query
+ for libva-wayland.pc in configure and use this in other places as well. It is thus only
+ correct and consequent, to do it also at this spot.
+2015-10-28 12:55:18 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideocontext.c:
+ vaapivideocontext: log a message if no bus
+ Raise a warning if there is no bus when the element tries to post a
+ message.
+2015-10-28 12:57:14 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapisink.c:
+ vaapisink: create display at open()
+ Instead of creating the VA display before setting the bus to the
+ element, it is created when the element is opened.
+ Basically, this commit is a revert of
+ 5e5d62cac79754ba60057fc2516135aad8d7de35
+ That was done when the GStreamer's context sharing was not mature
+ enough as now. There is no reason to keep this hack.
+2016-11-04 18:04:36 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ vaapidecode: don't add video crop meta
+ Since the differentiation of negotiation caps and allocation caps,
+ there is no need to add a video crop meta with the negotiation caps.
+ Hence, removing it.
+2015-03-19 21:20:26 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideobuffer.c:
+ * gst/vaapi/gstvaapivideometa.c:
+ * gst/vaapi/gstvaapivideometa.h:
+ remove the video converter from vaapi buffer meta
+ Since all the video converter were deprecated in gstreamer-1.2, we don't need
+ to handle them anymore in the vaapi's buffer meta.
+ This patch removes its usage and the buffer meta's API for that.
+2016-11-21 18:28:18 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: destroy source pad allocator and pool
+ First, deactivate source pad pool when the out caps change, and if so,
+ destroy texture map, the source pad allocator and pool only if the
+ new caps are different from the ones already set.
+2016-11-21 19:17:07 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: don't destroy sink pad allocator
+ Don't destroy sink pad allocator at _set_caps() because it will be done at
+ ensure_sinkpad_buffer_pool() if it is required.
+2016-11-21 18:27:00 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: first validate the out caps
+ When calling _set_caps() first validate the out caps before doing
+ anything else.
+2016-11-21 18:42:02 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ vaapidecode: negotiate after destroying allocator
+ This is related with bug 758907 when no vaapipostproc is used (no
+ vaapidecodebin). In order to negotiate downstream we need to destroy
+ the source pad allocator, otherwise the same allocated buffers are
+ used, failing the mapping.
+2016-11-21 16:35:34 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: remove GST_VAAPI_TYPE_VIDEO_INFO
+ Remove redundant GST_VAAPI_TYPE_VIDEO_INFO, since it is a duplicate of
+ GST_TYPE_VIDEO_INFO created before gstreamer 1.6, where the boxed type
+ was created.
+2016-11-21 12:51:25 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: update the src pad allocator video info
+ Update the size, stride and offset of the source pad allocator video
+ info, so the pool could set the correct GstVideoMeta
+2016-11-21 12:36:27 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: add missing documentation
+2016-11-21 12:29:26 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: use early return without goto
+2016-11-21 11:25:21 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ plugins: add allocator to allocation query
+ This patch adds the created allocator to the allocation query either
+ in decide_allocation() and propose_allocation() vmehtods.
+ With it, there's no need to set the modified allocator's size in the
+ pool configuration.
+2016-10-19 15:15:01 +0100 Julien Isorce <>
+ * gst/vaapi/gstvaapivideobufferpool.c:
+ vaapivideobufferpool: set correct buffer size
+ We should set the correct buffer size when we are configuring the pool,
+ otherwise the buffer will be discarded when it returns to the pool.
+ Indeed when the ref-count of a buffer reaches zero, its pool will queue
+ it back (and ref it) if, and only if, the buffer size matches the
+ configured buffer size on the pool.
+ This issue can be debugged with GST_DEBUG=*PERF*:6, see gstbufferpool.c
+2016-11-10 13:26:31 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: check for memory allocator
+ When calling gst_vaapi_video_memory_copy() the allocator of the memory
+ to copy should be allocated by the vaapi allocator.
+ This patch does this verification.
+2016-11-10 13:25:30 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: code style fixes
+ A cosmetic commit for enhance readability of the casts and method
+ preconditions.
+2016-11-09 19:49:22 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: unroll gst_vaapi_video_allocator_free()
+ Instead of having a gst_vaapi_video_memory_free() that is only going to
+ be called by gst_vaapi_video_allocator_free(), let's just remove the first
+ and merged into the second.
+2016-11-09 19:29:12 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: avoid virtual methods casting
+ Use the expected virtual method signatures for readability.
+2016-11-09 18:58:20 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: remove unimplemented methods
+ Remove unimplemented method for allocator mem_share() and mem_is_span().
+2016-11-09 18:54:47 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: fail if frame map can't get plane
+ If map() vmethod in GstVideMeta cannot get the plane data, return false,
+ thus the caller will not try to read invalid memory.
+2016-11-09 18:39:06 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: lock map and unmap operations
+ In order to avoid race condition when two threads call map/unmap the same
+ VA surface, this patch mutex these operations.
+2016-11-09 17:37:06 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: refactor vaapi memory unmapping
+ There were duplicated code in gst_video_meta_unmap_vaapi_memory() and
+ gst_vaapi_video_memory_unmap() when unmapping.
+ This patch refactors both methods adding the common function
+ unmap_vaapi_memory(). This also ensures, if direct rendering is enabled, it
+ is correctly reset.
+ Additionally, only when mapping flag has the WRITE bit, it set the image as
+ current, which was done in gst_video_meta_map_vaapi_memory() but no in
+ gst_vaapi_video_memory_map().
+ In order to make this, the mapping flags were required, so instead of
+ overloading mem_unmap() virtual function, mem_unmap_full() is overloaded.
+2016-11-09 13:54:23 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: refactor vaapi memory mapping
+ There were duplicated code in gst_video_meta_map_vaapi_memory() and
+ gst_vaapi_video_memory_map() when doing the READ and WRITE mapping.
+ This patch refactors both methods adding the common function
+ map_vaapi_memory().
+ Additionally, only when flag has the READ bit it calls
+ ensure_images_is_current(), which was done in
+ gst_video_meta_map_vaapi_memory() but no in
+ gst_vaapi_video_memory_map().
+2016-10-27 18:22:18 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ vaapidecode: unref allowed_sinkpad_caps at close()
+ The variable member allowed_sinkpad_caps is constructed querying the
+ current VA display. Bearing that in mind, the variable shall be freed
+ when the VA display changes or is removed.
+ This patch moves the freeing of allowed_sinkpad_caps to close(), when
+ the VA display is freed.
+2016-11-11 11:40:09 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapisink.c:
+ vaapisink: finish event thread at stop()
+ The thread that handles window's events should be finished during
+ pipeline's shutdown, otherwise it will remain alive during pipeline
+ re-activation, leading to unexpected problems.
+ This patch fixes failures of intensive_state_change scenario of
+ gst-validate
+2016-11-08 09:35:00 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipostproc.c:
+ vaapipostproc: enhance debug message
+ "gst_pad_push" is not a good description of the event.
+2016-11-08 10:05:32 +0900 Hyunjun Ko <>
+ * gst/vaapi/gstvaapipostproc.c:
+ postproc: honor gst_pad_push() return value
+ Returning GST_FLOW_ERROR always when gst_pad_push fails might lead to
+ deadlock during seek.
+ This patch returns the same error of gst_pad_push() and log out the
+ return value.
+2016-11-04 16:26:18 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ In commit 6d11a00 were introduced a regression when gstreamer-vaapi is
+ compiled with out EGL/GLX support: it shall not support
+ This patch guards the inclusion of GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS in the
+ allowed src caps for vaapedecode if EGL/GLX.
+2016-11-04 12:55:23 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: increment map counter only if succeeded
+ Previously the frame map counter increased independently if the map succeeded
+ or not. This leaded to critical messages and crashes if the frame was unable
+ to be mapped, but the counter increased.
+ This patch increases the map counter only if the map operation occurred.
+2016-11-03 17:30:46 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: set negotiation caps in src allocator
+ When the allocator is created, it stores the allocation caps. But sometimes
+ the "allocation caps" may be different from the "negotiation caps".
+ In this case, the allocator should store the negotiation caps since they
+ are the ones used for frame mapping with GstVideoMeta.
+ When vaapispostproc is used, this is not a problem since the element is assume
+ to resize. But when using a vaapi decoder only, with a software renderer, it
+ fails in this case.
+2016-07-19 16:40:10 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapidecode.c:
+ * gst/vaapi/gstvaapidecode.h:
+ vaapidecode: generate source pad caps
+ Just as vaapipostproc, VA decoder's context can be queried to get the possible
+ raw formats, so, the src caps can negotiate the exact caps that the context
+ supports.
+2016-02-25 18:57:30 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapidecoder.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder.h:
+ libs: decoder: add _get_surface_formats()
+ This function exposes the available formats of the surfaces in the the current
+ context to the plugins.
+2016-02-18 19:32:58 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapicontext.c:
+ * gst-libs/gst/vaapi/gstvaapicontext.h:
+ libs: context: ensure context formats
+ This patch ensures to get the formats, as filter does, available in the
+ decoder / encoder context.
+ The context fills up the array as soon it is created, otherwise the pipeline
+ could get stalled (perhaps this is a bug in my HSW backend).
+2016-02-18 19:20:10 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapifilter.c:
+ * gst-libs/gst/vaapi/gstvaapiutils_core.c:
+ * gst-libs/gst/vaapi/gstvaapiutils_core.h:
+ libs: move get_surface_formats to utils_core
+ The query of all the supported formats for a VA config were only used by the
+ postprocessor (vaapifilter). But, in order to enable the vaapidecoder to
+ negotiate a suitable raw format with downstream, we need to query these
+ formats against the decoder's config.
+ This patch is the first step: moves the code in filter's ensure_image() to a
+ generic gst_vaapi_get_surface_formats() in vaapiutils_core, so it can be
+ shared later by the decoder.
+2016-07-19 18:56:15 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: remove set_sinkpad_dmabuf_allocator()
+ Since when the sink pad allocator is created, it is decided if the required
+ one is vaapi allocator or dmabuf allocator, there is no need to force its set
+ again.
+2016-10-27 11:25:55 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: ensure display when getting raw caps
+ When running gst-discoverer-1.0, in certain media, vaapipostroc is stopped
+ meanwhile it is transforming caps. The problem is that stop() calls
+ gst_vaapi_plugin_base_close(), which nullifies the element's va display, but
+ the va display is used in tranform_caps() when it is extracting the possible
+ format conversions. This display disappearing generates warning messages.
+ This patch holds a local reference of va display at ensure_allowed_raw_caps()
+ hence it doesn't go away meanwhile it is used, even if the
+ gst_vaapi_plugin_base_close() is called in other thread.
+2016-11-03 12:54:23 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapiencode_h264.c:
+ * gst/vaapi/gstvaapiencode_h265.c:
+ plugins: fix code style for errors
+2016-10-19 19:04:20 +0200 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapibufferproxy.c:
+ * gst-libs/gst/vaapi/gstvaapicodedbuffer.c:
+ * gst-libs/gst/vaapi/gstvaapicodedbufferproxy.c:
+ * gst-libs/gst/vaapi/gstvaapicontext.c:
+ * gst-libs/gst/vaapi/gstvaapicontext_overlay.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_dpb.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_h264.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_h265.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_jpeg.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_mpeg2.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_vc1.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_vp8.c:
+ * gst-libs/gst/vaapi/gstvaapidecoder_vp9.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay.c:
+ * gst-libs/gst/vaapi/gstvaapidisplaycache.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder_h264.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder_h265.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder_jpeg.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder_mpeg2.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder_vp8.c:
+ * gst-libs/gst/vaapi/gstvaapiencoder_vp9.c:
+ * gst-libs/gst/vaapi/gstvaapifilter.c:
+ * gst-libs/gst/vaapi/gstvaapiimage.c:
+ * gst-libs/gst/vaapi/gstvaapiimagepool.c:
+ * gst-libs/gst/vaapi/gstvaapiparser_frame.c:
+ * gst-libs/gst/vaapi/gstvaapipixmap.c:
+ * gst-libs/gst/vaapi/gstvaapisubpicture.c:
+ * gst-libs/gst/vaapi/gstvaapisurface.c:
+ * gst-libs/gst/vaapi/gstvaapisurfacepool.c:
+ * gst-libs/gst/vaapi/gstvaapisurfaceproxy.c:
+ * gst-libs/gst/vaapi/gstvaapitexture.c:
+ * gst-libs/gst/vaapi/gstvaapiutils.c:
+ * gst-libs/gst/vaapi/gstvaapiutils_egl.c:
+ * gst-libs/gst/vaapi/gstvaapiutils_glx.c:
+ * gst-libs/gst/vaapi/gstvaapiwindow.c:
+ * gst-libs/gst/vaapi/gstvaapiwindow_glx.c:
+ * gst-libs/gst/vaapi/gstvaapiwindow_wayland.c:
+ libs: fix code style for errors
+2016-11-03 09:31:17 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ * gst/vaapi/gstvaapivideocontext.c:
+ plugins: update GstGL deprecated symbol
+ GST_GL_TYPE_CONTEXT was deprecated. Now it is GST_TYPE_GL_CONTEXT.
+2016-10-21 11:48:54 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: direct render when raw video
+ Enable the direct rendering with linear surfaces if the negotiated src caps
+ are video/x-raw without features.
+ Pass also the caps, since they are needed to know the requested caps features.
+2016-10-24 20:09:59 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: move src allocator error to instantiator
+ Just as we did in ensure_sinkpad_allocator(), let's move the error message
+ into the ensure_srcpad_allocator() from the caller,
+ gst_vaapi_plugin_base_decide_allocation()
+2016-10-20 19:37:01 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: enable direct upload if raw video
+ Enable the direct upload with linear surfaces if the negotiated sink caps are
+ video/x-raw without features.
+2016-10-21 11:21:04 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginutil.c:
+ * gst/vaapi/gstvaapipluginutil.h:
+ pluginutil: add gst_caps_is_video_raw()
+2016-10-24 19:25:27 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: receive caps in ensure_sinkpad_allocator()
+ Instead of receiving the GstVideoInfo structure as parameter, get the original
+ GstCaps from ensure_sinkpad_buffer_pool(), in this way we could decide better
+ which allocator instantiate.
+2016-10-20 19:31:58 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: destroy derived image at unmap
+ If the allocator was configured to use direct upload or rendering, the
+ generated derived image created at mapping needs to be destroyed after
+ unmapping, because, in order to process the surface, it should not be marked
+ as "busy" by the driver.
+2016-10-21 11:57:55 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: enhance logs for direct modes
+ Print, conditionally, only the enabled direct mode.
+2016-10-20 17:02:49 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: add direct upload flag
+ Adds the direct-upload flag in the GstVaapiVideoAllocator and
+ GstVaapiVideoMemory.
+ It still doesn't apply any functional change.
+2016-10-20 16:49:22 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ * gst/vaapi/gstvaapivideomemory.c:
+ * gst/vaapi/gstvaapivideomemory.h:
+ vaapivideomemory: set direct rendering at run-time
+ The way to experiment with the direct rendering is through and internal
+ compiler pre-processor flag.
+ The current change set enables a way to specified at run-time, as a flag
+ passed to the allocator at instanciation time.
+2016-10-20 18:09:59 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: log in perf category when copy
+ Log in performance category when the derive image handling fails, falling back
+ to memory copy.
+2016-10-20 16:31:21 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: error log is derive image fails
+ Instead of a silently failure of the derive image, this patch log an error
+ message according to the failure.
+2016-10-20 12:52:18 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: store surface alloc flags in qdata
+ For sake of consistency, we should add the requested surface allocation flags
+ to the object's qdata structure.
+2016-10-20 12:22:06 +0200 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapivideomemory.c:
+ vaapivideomemory: category init when object define
+ Move the Gstreamer debug category initialize to the GObject definition.
+2016-11-03 08:31:16 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapitexturemap.c:
+ libs: vaapitexturemap: trivial code-style fix
+2016-11-02 20:01:09 +0100 Víctor Manuel Jáquez Leal <>
+ * gst-libs/gst/vaapi/gstvaapidisplay_egl.c:
+ libs: display: egl: avoid recreate native display
+ Instead of passing the native descriptor of the display, just pass the received
+ GstVaapiDisplay and reuse it.
+2016-11-02 15:38:52 +0100 Víctor Manuel Jáquez Leal <>
+ * gst/vaapi/gstvaapipluginbase.c:
+ plugins: log the GstVaapiDisplay name
+ Now that GstVaapiDisplay is descendant of GstObject, it has a human-friendly
+ name. Log it instead of the memory address.
+2016-11-02 18:37:00 +0900 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapiwindow_egl.c:
+ libs: window: egl: pass native va display
+ When creating a GstVaapiWindowEGL, it also creates native window by its own
+ native display. It should pass the native display, either X11 or Wayland.
+2016-10-13 12:53:17 +0900 Hyunjun Ko <>
+ * gst-libs/gst/vaapi/gstvaapidebug.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_drm.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay_drm.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_drm_priv.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_egl.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay_egl.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_egl_priv.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_glx.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay_glx.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_glx_priv.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_priv.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_wayland.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay_wayland.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_wayland_priv.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_x11.c:
+ * gst-libs/gst/vaapi/gstvaapidisplay_x11.h:
+ * gst-libs/gst/vaapi/gstvaapidisplay_x11_priv.h:
+ * gst-libs/gst/vaapi/gstvaapitexture_egl.c:
+ * gst-libs/gst/vaapi/gstvaapiutils_egl.c:
+ * gst-libs/gst/vaapi/gstvaapiutils_egl.h:
+ * gst/vaapi/gstvaapivideocontext.c:
+ libs: display: GstVaapiDisplay as GstObject descendant
+ This patch is to change the inheritance of GstVaapiDisplay to GstObject,
+ instead of GstVaapiMiniObject. In this way we can use all the available
+ infrastructure for GObject/GstObject such as GstTracer, GIR, etc.
+ In addition, a new debug category for GstVaapiDisplay is created to make it
+ easier to trace debug messages. It is named "vaapidisplay" and it transverse
+ all the VA display backends (DRM, GLX, EGL, Wayland, ...)
+ This patch is a step forward to expose GstVaapiDisplay for users in a future
+ library.
+ Signed-off-by: Víctor Manuel Jáquez Leal <>
+=== release 1.11.0 ===
+2016-11-01 18:54:54 +0200 Sebastian Dröge <>
+ *
+ Back to development
=== release 1.10.0 ===
-2016-11-01 Sebastian Dröge <>
+2016-11-01 18:19:32 +0200 Sebastian Dröge <>
+ * ChangeLog:
+ * NEWS:
- releasing 1.10.0
+ * gstreamer-vaapi.doap:
+ Release 1.10.0
2016-10-27 17:13:48 +0200 Víctor Manuel Jáquez Leal <>
diff --git a/NEWS b/NEWS
index 547de7f3..a940f7bb 100644
--- a/NEWS
+++ b/NEWS
@@ -1,1114 +1 @@
-# GStreamer 1.10 Release Notes
-**GStreamer 1.10.0 was released on 1st November 2016.**
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
-As always, this release is again packed with new features, bug fixes and other
-See [][latest] for the latest
-version of this document.
-*Last updated: Tuesday 1 Nov 2016, 15:00 UTC [(log)][gitlog]*
-## Introduction
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
-As always, this release is again packed with new features, bug fixes and other
-## Highlights
-- Several convenience APIs have been added to make developers' lives easier
-- A new `GstStream` API provides applications a more meaningful view of the
- structure of streams, simplifying the process of dealing with media in
- complex container formats
-- Experimental `decodebin3` and `playbin3` elements which bring a number of
- improvements which were hard to implement within `decodebin` and `playbin`
-- A new `parsebin` element to automatically unpack and parse a stream, stopping
- just short of decoding
-- Experimental new `meson`-based build system, bringing faster build and much
- better Windows support (including for building with Visual Studio)
-- A new `gst-docs` module has been created, and we are in the process of moving
- our documentation to a markdown-based format for easier maintenance and
- updates
-- A new `gst-examples` module has been create, which contains example
- GStreamer applications and is expected to grow with many more examples in
- the future
-- Various OpenGL and OpenGL|ES-related fixes and improvements for greater
- efficiency on desktop and mobile platforms, and Vulkan support on Wayland was
- also added
-- Extensive improvements to the VAAPI plugins for improved robustness and
- efficiency
-- Lots of fixes and improvements across the board, spanning RTP/RTSP, V4L2,
- Bluetooth, audio conversion, echo cancellation, and more!
-## Major new features and changes
-### Noteworthy new API, features and other changes
-#### Core API additions
-##### Receive property change notifications via bus messages
-New API was added to receive element property change notifications via
-bus messages. So far, applications had to connect a callback to an element's
-`notify::property-name` signal via the GObject API, which was inconvenient for
-at least two reasons: one had to implement a signal callback function, and that
-callback function would usually be called from one of the streaming threads, so
-one had to marshal (send) any information gathered or pending requests to the
-main application thread which was tedious and error-prone.
-Enter [`gst_element_add_property_notify_watch()`][notify-watch] and
-[`gst_element_add_property_deep_notify_watch()`][deep-notify-watch] which will
-watch for changes of a property on the specified element, either only for this
-element or recursively for a whole bin or pipeline. Whenever such a
-property change happens, a `GST_MESSAGE_PROPERTY_NOTIFY` message will be posted
-on the pipeline bus with details of the element, the property and the new
-property value, all of which can be retrieved later from the message in the
-application via [`gst_message_parse_property_notify()`][parse-notify]. Unlike
-the GstBus watch functions, this API does not rely on a running GLib main loop.
-The above can be used to be notified asynchronously of caps changes in the
-pipeline, or volume changes on an audio sink element, for example.
-##### GstBin "deep" element-added and element-removed signals
-GstBin has gained `"deep-element-added"` and `"deep-element-removed"` signals
-which makes it easier for applications and higher-level plugins to track when
-elements are added or removed from a complex pipeline with multiple sub-bins.
-`playbin` makes use of this to implement the new `"element-setup"` signal which
-can be used to configure elements as they are added to `playbin`, just like the
-existing `"source-setup"` signal which can be used to configure the source
-element created.
-##### Error messages can contain additional structured details
-It is often useful to provide additional, structured information in error,
-warning or info messages for applications (or higher-level elements) to make
-intelligent decisions based on them. To allow this, error, warning and info
-messages now have API for adding arbitrary additional information to them
-using a `GstStructure`:
-[`GST_ELEMENT_ERROR_WITH_DETAILS`][element-error-with-details] and
-corresponding API for the other message types.
-This is now used e.g. by the new [`GST_ELEMENT_FLOW_ERROR`][element-flow-error]
-API to include the actual flow error in the error message, and the
-[souphttpsrc element][souphttpsrc-detailed-errors] to provide the HTTP
-status code, and the URL (if any) to which a redirection has happened.
-##### Redirect messages have official API now
-Sometimes, elements need to redirect the current stream URL and tell the
-application to proceed with this new URL, possibly using a different
-protocol too (thus changing the pipeline configuration). Until now, this was
-informally implemented using `ELEMENT` messages on the bus.
-Now this has been formalized in the form of a new `GST_MESSAGE_REDIRECT` message.
-A new redirect message can be created using [`gst_message_new_redirect()`][new-redirect].
-If needed, multiple redirect locations can be specified by calling
-[`gst_message_add_redirect_entry()`][add-redirect] to add further redirect
-entries, all with metadata, so the application can decide which is
-most suitable (e.g. depending on the bitrate tags).
-##### New pad linking convenience functions that automatically create ghost pads
-New pad linking convenience functions were added:
-[`gst_pad_link_maybe_ghosting()`][pad-maybe-ghost] and
-[`gst_pad_link_maybe_ghosting_full()`][pad-maybe-ghost-full] which were
-previously internal to GStreamer have now been exposed for general use.
-The existing pad link functions will refuse to link pads or elements at
-different levels in the pipeline hierarchy, requiring the developer to
-create ghost pads where necessary. These new utility functions will
-automatically create ghostpads as needed when linking pads at different
-levels of the hierarchy (e.g. from an element inside a bin to one that's at
-the same level in the hierarchy as the bin, or in another bin).
-##### Miscellaneous
-Pad probes: IDLE and BLOCK probes now work slightly differently in pull mode,
-so that push and pull mode have opposite scenarios for idle and blocking probes.
-In push mode, it will block with some data type and IDLE won't have any data.
-In pull mode, it will block _before_ getting a buffer and will be IDLE once some
-data has been obtained. ([commit][commit-pad-probes], [bug][bug-pad-probes])
-[`gst_parse_launch_full()`][parse-launch-full] can now be made to return a
-`GstBin` instead of a top-level pipeline by passing the new
-The default GStreamer debug log handler can now be removed before
-calling `gst_init()`, so that it will never get installed and won't be active
-during initialization.
-A new [`STREAM_GROUP_DONE` event][stream-group-done-event] was added. In some
-ways it works similar to the `EOS` event in that it can be used to unblock
-downstream elements which may be waiting for further data, such as for example
-`input-selector`. Unlike `EOS`, further data flow may happen after the
-`STREAM_GROUP_DONE` event though (and without the need to flush the pipeline).
-This is used to unblock input-selector when switching between streams in
-adaptive streaming scenarios (e.g. HLS).
-The `gst-launch-1.0` command line tool will now print unescaped caps in verbose
-mode (enabled by the -v switch).
-[`gst_element_call_async()`][call-async] has been added as convenience API for
-plugin developers. It is useful for one-shot operations that need to be done
-from a thread other than the current streaming thread. It is backed by a
-thread-pool that is shared by all elements.
-Various race conditions have been fixed around the `GstPoll` API used by e.g.
-`GstBus` and `GstBufferPool`. Some of these manifested themselves primarily
-on Windows.
-`GstAdapter` can now keep track of discontinuities signalled via the `DISCONT`
-buffer flag, and has gained [new API][new-adapter-api] to track PTS, DTS and
-offset at the last discont. This is useful for plugins implementing advanced
-trick mode scenarios.
-`GstTestClock` gained a new [`"clock-type"` property][clock-type-prop].
-#### GstStream API for stream announcement and stream selection
-New stream listing and stream selection API: new API has been added to
-provide high-level abstractions for streams ([`GstStream`][stream-api])
-and collections of streams ([`GstStreamCollections`][stream-collection-api]).
-##### Stream listing
-A [`GstStream`][stream-api] contains all the information pertinent to a stream,
-such as stream id, caps, tags, flags and stream type(s); it can represent a
-single elementary stream (e.g. audio, video, subtitles, etc.) or a container
-stream. This will depend on the context. In a decodebin3/playbin3 one
-it will typically be elementary streams that can be selected and unselected.
-A [`GstStreamCollection`][stream-collection-api] represents a group of streams
-and is used to announce or publish all available streams. A GstStreamCollection
-is immutable - once created it won't change. If the available streams change,
-e.g. because a new stream appeared or some streams disappeared, a new stream
-collection will be published. This new stream collection may contain streams
-from the previous collection if those streams persist, or completely new ones.
-Stream collections do not yet list all theoretically available streams,
-e.g. other available DVD angles or alternative resolutions/bitrate of the same
-stream in case of adaptive streaming.
-New events and messages have been added to notify or update other elements and
-the application about which streams are currently available and/or selected.
-This way, we can easily and seamlessly let the application know whenever the
-available streams change, as happens frequently with digital television streams
-for example. The new system is also more flexible. For example, it is now also
-possible for the application to select multiple streams of the same type
-(e.g. in a transcoding/transmuxing scenario).
-A [`STREAM_COLLECTION` message][stream-collection-msg] is posted on the bus
-to inform the parent bin (e.g. `playbin3`, `decodebin3`) and/or the application
-about what streams are available, so you no longer have to hunt for this
-information at different places. The available information includes number of
-streams of each type, caps, tags etc. Bins and/or the application can intercept
-the message synchronously to select and deselect streams before any data is
-produced - for the case where elements such as the demuxers support the new
-stream API, not necessarily in the parsebin compatibility fallback case.
-Similarly, there is also a [`STREAM_COLLECTION` event][stream-collection-event]
-to inform downstream elements of the available streams. This event can be used
-by elements to aggregate streams from multiple inputs into one single collection.
-The `STREAM_START` event was extended so that it can also contain a GstStream
-object with all information about the current stream, see
-[`gst_event_set_stream()`][event-set-stream] and
-[`gst_pad_get_stream()`][pad-get-stream] is a new utility function that can be
-used to look up the GstStream from the `STREAM_START` sticky event on a pad.
-##### Stream selection
-Once the available streams have been published, streams can be selected via
-their stream ID using the new `SELECT_STREAMS` event, which can be created
-with [`gst_event_new_select_streams()`][event-select-streams]. The new API
-supports selecting multiple streams per stream type. In the future, we may also
-implement explicit deselection of streams that will never be used, so
-elements can skip these and never expose them or output data for them in the
-first place.
-The application is then notified of the currently selected streams via the
-new `STREAMS_SELECTED` message on the pipeline bus, containing both the current
-stream collection as well as the selected streams. This might be posted in
-response to the application sending a `SELECT_STREAMS` event or when
-`decodebin3` or `playbin3` decide on the streams to be initially selected without
-application input.
-##### Further reading
-See further below for some notes on the new elements supporting this new
-stream API, namely: `decodebin3`, `playbin3` and `parsebin`.
-More information about the new API and the new elements can also be found here:
-- GStreamer [stream selection design docs][streams-design]
-- Edward Hervey's talk ["The new streams API: Design and usage"][streams-talk] ([slides][streams-slides])
-- Edward Hervey's talk ["Decodebin3: Dealing with modern playback use cases"][db3-talk] ([slides][db3-slides])
-#### Audio conversion and resampling API
-The audio conversion library received a completely new and rewritten audio
-resampler, complementing the audio conversion routines moved into the audio
-library in the [previous release][release-notes-1.8]. Integrating the resampler
-with the other audio conversion library allows us to implement generic
-conversion much more efficiently, as format conversion and resampling can now
-be done in the same processing loop instead of having to do it in separate
-steps (our element implementations do not make use of this yet though).
-The new audio resampler library is a combination of some of the best features
-of other samplers such as ffmpeg, speex and SRC. It natively supports S16, S32,
-F32 and F64 formats and uses optimized x86 and neon assembly for most of its
-processing. It also has support for dynamically changing sample rates by incrementally
-updating the filter tables using linear or cubic interpolation. According to
-some benchmarks, it's one of the fastest and most accurate resamplers around.
-The `audioresample` plugin has been ported to the new audio library functions
-to make use of the new resampler.
-#### Support for SMPTE timecodes
-Support for SMPTE timecodes was added to the GStreamer video library. This
-comes with an abstraction for timecodes, [`GstVideoTimeCode`][video-timecode]
-and a [`GstMeta`][video-timecode-meta] that can be placed on video buffers for
-carrying the timecode information for each frame. Additionally there is
-various API for making handling of timecodes easy and to do various
-calculations with them.
-A new plugin called [`timecode`][timecode-plugin] was added, that contains an
-element called `timecodestamper` for putting the timecode meta on video frames
-based on counting the frames and another element called `timecodewait` that
-drops all video (and audio) until a specific timecode is reached.
-Additionally support was added to the Decklink plugin for including the
-timecode information when sending video out or capturing it via SDI, the
-`qtmux` element is able to write timecode information into the MOV container,
-and the `timeoverlay` element can overlay timecodes on top of the video.
-More information can be found in the [talk about timecodes][timecode-talk] at
-the GStreamer Conference 2016.
-#### GStreamer OpenMAX IL plugin
-The last gst-omx release, 1.2.0, was in July 2014. It was about time to get
-a new one out with all the improvements that have happened in the meantime.
-From now on, we will try to release gst-omx together with all other modules.
-This release features a lot of bugfixes, improved support for the Raspberry Pi
-and in general improved support for zerocopy rendering via EGL and a few minor
-new features.
-At this point, gst-omx is known to work best on the Raspberry Pi platform but
-it is also known to work on various other platforms. Unfortunately, we are
-not including configurations for any other platforms, so if you happen to use
-gst-omx: please send us patches with your configuration and code changes!
-### New Elements
-#### decodebin3, playbin3, parsebin (experimental)
-This release features new decoding and playback elements as experimental
-technology previews: `decodebin3` and `playbin3` will soon supersede the
-existing `decodebin` and `playbin` elements. We skipped the number 2 because
-it was already used back in the 0.10 days, which might cause confusion.
-Experimental technology preview means that everything should work fine already,
-but we can't guarantee there won't be minor behavioural changes in the
-next cycle. In any case, please test and report any problems back.
-Before we go into detail about what these new elements improve, let's look at
-the new [`parsebin`][parsebin] element. It works similarly to `decodebin` and
-`decodebin3`, only that it stops one step short and does not plug any actual
-decoder elements. It will only plug parsers, tag readers, demuxers and
-depayloaders. Also note that parsebin does not contain any queueing element.
-[`decodebin3`'s][decodebin3] internal architecture is slightly different from
-the existing `decodebin` element and fixes many long-standing issues with our
-decoding engine. For one, data is now fed into the internal `multiqueue` element
-*after* it has been parsed and timestamped, which means that the `multiqueue`
-element now has more knowledge and is able to calculate the interleaving of the
-various streams, thus minimizing memory requirements and doing away with magic
-values for buffering limits that were conceived when videos were 240p or 360p.
-Anyone who has tried to play back 4k video streams with decodebin2
-will have noticed the limitations of that approach. The improved timestamp
-tracking also enables `multiqueue` to keep streams of the same type (audio,
-video) aligned better, making sure switching between streams of the same type
-is very fast.
-Another major improvement in `decodebin3` is that it will no longer decode
-streams that are not being used. With the old `decodebin` and `playbin`, when
-there were 8 audio streams we would always decode all 8 streams even
-if 7 were not actually used. This caused a lot of CPU overhead, which was
-particularly problematic on embedded devices. When switching between streams
-`decodebin3` will try hard to re-use existing decoders. This is useful when
-switching between multiple streams of the same type if they are encoded in the
-same format.
-Re-using decoders is also useful when the available streams change on the fly,
-as might happen with radio streams (chained Oggs), digital television
-broadcasts, when adaptive streaming streams change bitrate, or when switching
-gaplessly to the next title. In order to guarantee a seamless transition, the
-old `decodebin2` would plug a second decoder for the new stream while finishing
-up the old stream. With `decodebin3`, this is no longer needed - at least not
-when the new and old format are the same. This will be particularly useful
-on embedded systems where it is often not possible to run multiple decoders
-at the same time, or when tearing down and setting up decoders is fairly
-`decodebin3` also allows for multiple input streams, not just a single one.
-This will be useful, in the future, for gapless playback, or for feeding
-multiple external subtitle streams to decodebin/playbin.
-`playbin3` uses `decodebin3` internally, and will supercede `playbin`.
-It was decided that it would be too risky to make the old `playbin` use the
-new `decodebin3` in a backwards-compatible way. The new architecture
-makes it awkward, if not impossible, to maintain perfect backwards compatibility
-in some aspects, hence `playbin3` was born, and developers can migrate to the
-new element and new API at their own pace.
-All of these new elements make use of the new `GstStream` API for listing and
-selecting streams, as described above. `parsebin` provides backwards
-compatibility for demuxers and parsers which do not advertise their streams
-using the new API yet (which is most).
-The new elements are not entirely feature-complete yet: `playbin3` does not
-support so-called decodersinks yet where the data is not decoded inside
-GStreamer but passed directly for decoding to the sink. `decodebin3` is missing
-the various `autoplug-*` signals to influence which decoders get autoplugged
-in which order. We're looking to add back this functionality, but it will probably
-be in a different way, with a single unified signal and using GstStream perhaps.
-For more information on these new elements, check out Edward Hervey's talk
-[*decodebin3 - dealing with modern playback use cases*][db3-talk]
-#### LV2 ported from 0.10 and switched from slv2 to lilv2
-The LV2 wrapper plugin has been ported to 1.0 and moved from using the
-deprecated slv2 library to its replacement liblv2. We support sources and
-filter elements. lv2 is short for *Linux Audio Developer's Simple Plugin API
-(LADSPA) version 2* and is an open standard for audio plugins which includes
-support for audio synthesis (generation), digital signal processing of digital
-audio, and MIDI. The new lv2 plugin supersedes the existing LADSPA plugin.
-#### WebRTC DSP Plugin for echo-cancellation, gain control and noise suppression
-A set of new elements ([webrtcdsp][webrtcdsp], [webrtcechoprobe][webrtcechoprobe])
-based on the WebRTC DSP software stack can now be used to improve your audio
-voice communication pipelines. They support echo cancellation, gain control,
-noise suppression and more. For more details you may read
-[Nicolas' blog post][webrtc-blog-post].
-#### Fraunhofer FDK AAC encoder and decoder
-New encoder and decoder elements wrapping the Fraunhofer FDK AAC library have
-been added (`fdkaacdec`, `fdkaacdec`). The Fraunhofer FDK AAC encoder is
-generally considered to be a very high-quality AAC encoder, but unfortunately
-it comes under a non-free license with the option to obtain a paid, commercial
-### Noteworthy element features and additions
-#### Major RTP and RTSP improvements
-- The RTSP server and source element, as well as the RTP jitterbuffer now support
- remote clock synchronization according to [RFC7273][].
-- Support for application and profile specific RTCP packets was added.
-- The H265/HEVC payloader/depayloader is again in sync with the final RFC.
-- Seeking stability of the RTSP source and server was improved a lot and
- runs stably now, even when doing scrub-seeking.
-- The RTSP server received various major bugfixes, including for regressions that
- caused the IP/port address pool to not be considered, or NAT hole punching
- to not work anymore. [Bugzilla #766612][]
-- Various other bugfixes that improve the stability of RTP and RTSP, including
- many new unit / integration tests.
-#### Improvements to splitmuxsrc and splitmuxsink
-- The splitmux element received reliability and error handling improvements,
- removing at least one deadlock case. `splitmuxsrc` now stops cleanly at the end
- of the segment when handling seeks with a stop time. We fixed a bug with large
- amounts of downstream buffering causing incorrect out-of-sequence playback.
-- `splitmuxsrc` now has a `"format-location"` signal to directly specify the list
- of files to play from.
-- `splitmuxsink` can now optionally send force-keyunit events to upstream
- elements to allow splitting files more accurately instead of having to wait
- for upstream to provide a new keyframe by itself.
-#### OpenGL/GLES improvements
-##### iOS and macOS (OS/X)
-- We now create OpenGL|ES 3.x contexts on iOS by default with a fallback to
- OpenGL|ES 2.x if that fails.
-- Various zerocopy decoding fixes and enhancements with the
- encoding/decoding/capturing elements.
-- libdispatch is now used on all Apple platforms instead of GMainLoop, removing
- the expensive poll()/pthread_*() overhead.
-##### New API
-- `GstGLFramebuffer` - for wrapping OpenGL frame buffer objects. It provides
- facilities for attaching `GstGLMemory` objects to the necessary attachment
- points, binding and unbinding and running a user-supplied function with the
- framebuffer bound.
-- `GstGLRenderbuffer` (a `GstGLBaseMemory` subclass) - for wrapping OpenGL
- render buffer objects that are typically used for depth/stencil buffers or
- for color buffers where we don't care about the output.
-- `GstGLMemoryEGL` (a `GstGLMemory` subclass) - for combining `EGLImage`s with a GL
- texture that replaces `GstEGLImageMemory` bringing the improvements made to the
- other `GstGLMemory` implementations. This fixes a performance regression in
- zerocopy decoding on the Raspberry Pi when used with an updated gst-omx.
-##### Miscellaneous improvements
-- `gltestsrc` is now usable on devices/platforms with OpenGL 3.x and OpenGL|ES
- and has completed or gained support for new patterns in line with the
- existing ones in `videotestsrc`.
-- `gldeinterlace` is now available on devices/platforms with OpenGL|ES
- implementations.
-- The dispmanx backend (used on the Raspberry Pi) now supports the
- `gst_video_overlay_set_window_handle()` and
- `gst_video_overlay_set_render_rectangle()` functions.
-- The `gltransformation` element now correctly transforms mouse coordinates (in
- window space) to stream coordinates for both perspective and orthographic
- projections.
-- The `gltransformation` element now detects if the
- `GstVideoAffineTransformationMeta` is supported downstream and will efficiently
- pass its transformation downstream. This is a performance improvement as it
- results in less processing being required.
-- The wayland implementation now uses the multi-threaded safe event-loop API
- allowing correct usage in applications that call wayland functions from
- multiple threads.
-- Support for native 90 degree rotations and horizontal/vertical flips
- in `glimagesink`.
-#### Vulkan
-- The Vulkan elements now work under Wayland and have received numerous
- bugfixes.
-#### QML elements
-- `qmlglsink` video sink now works on more platforms, notably, Windows, Wayland,
- and Qt's eglfs (for embedded devices with an OpenGL implementation) including
- the Raspberry Pi.
-- New element `qmlglsrc` to record a QML scene into a GStreamer pipeline.
-#### KMS video sink
-- New element `kmssink` to render video using Direct Rendering Manager
- (DRM) and Kernel Mode Setting (KMS) subsystems in the Linux
- kernel. It is oriented to be used mostly in embedded systems.
-#### Wayland video sink
-- `waylandsink` now supports the wl_viewporter extension allowing
- video scaling and cropping to be delegated to the Wayland
- compositor. This extension is also been made optional, so that it can
- also work on current compositors that don't support it. It also now has
- support for the video meta, allowing zero-copy operations in more
- cases.
-#### DVB improvements
-- `dvbsrc` now has better delivery-system autodetection and several
- new parameter sanity-checks to improve its resilience to configuration
- omissions and errors. Superfluous polling continues to be trimmed down,
- and the debugging output has been made more consistent and precise.
- Additionally, the channel-configuration parser now supports the new dvbv5
- format, enabling `dvbbasebin` to automatically playback content transmitted
- on delivery systems that previously required manual description, like ISDB-T.
-#### DASH, HLS and adaptivedemux
-- HLS now has support for Alternate Rendition audio and video tracks. Full
- support for Alternate Rendition subtitle tracks will be in an upcoming release.
-- DASH received support for keyframe-only trick modes if the
- `GST_SEEK_FLAG_TRICKMODE_KEY_UNITS` flag is given when seeking. It will
- only download keyframes then, which should help with high-speed playback.
- Changes to skip over multiple frames based on bandwidth and other metrics
- will be added in the near future.
-- Lots of reliability fixes around seek handling and bitrate switching.
-#### Bluetooth improvements
-- The `avdtpsrc` element now supports metadata such as track title, artist
- name, and more, which devices can send via AVRCP. These are published as
- tags on the pipeline.
-- The `a2dpsink` element received some love and was cleaned up so that it
- actually works after the initial GStreamer 1.0 port.
-#### GStreamer VAAPI
-- All the decoders have been split, one plugin feature per codec. So
- far, the available ones, depending on the driver, are:
- `vaapimpeg2dec`, `vaapih264dec`, `vaapih265dec`, `vaapivc1dec`, `vaapivp8dec`,
- `vaapivp9dec` and `vaapijpegdec` (which already was split).
-- Improvements when mapping VA surfaces into memory. It now differentiates
- between negotiation caps and allocations caps, since the allocation
- memory for surfaces may be bigger than one that is going to be
- mapped.
-- `vaapih265enc` now supports constant bitrate mode (CBR).
-- Since several VA drivers are unmaintained, we decide to keep a whitelist
- with the va drivers we actually test, which is mostly the i915 and to a lesser
- degree gallium from the mesa project. Exporting the environment variable
- `GST_VAAPI_ALL_DRIVERS` disables the whitelist.
-- Plugin features are registered at run-time, according to their support by
- the loaded VA driver. So only the decoders and encoder supported by the
- system are registered. Since the driver can change, some dependencies are
- tracked to invalidate the GStreamer registry and reload the plugin.
-- `dmabuf` importation from upstream has been improved, gaining performance.
-- `vaapipostproc` now can negotiate buffer transformations via caps.
-- Decoders now can do I-frame only reverse playback. This decodes I-frames
- only because the surface pool is smaller than the required by the GOP to show all the
- frames.
-- The upload of frames onto native GL textures has been optimized too, keeping
- a cache of the internal structures for the offered textures by the sink.
-#### V4L2 changes
-- More pixels formats are now supported
-- Decoder is now using `G_SELECTION` instead of the deprecated `G_CROP`
-- Decoder now uses the `STOP` command to handle EOS
-- Transform element can now scale the pixel aspect ratio
-- Colorimetry support has been improved even more
-- We now support the `OUTPUT_OVERLAY` type of video node in v4l2sink
-#### Miscellaneous
-- `multiqueue`'s input pads gained a new `"group-id"` property which
- can be used to group input streams. Typically one will assign
- different id numbers to audio, video and subtitle streams for
- example. This way `multiqueue` can make sure streams of the same
- type advance in lockstep if some of the streams are unlinked and the
- `"sync-by-running-time"` property is set. This is used in
- decodebin3/playbin3 to implement almost-instantaneous stream
- switching. The grouping is required because different downstream
- paths (audio, video, etc.) may have different buffering/latency
- etc. so might be consuming data from multiqueue with a slightly
- different phase, and if we track different stream groups separately
- we minimize stream switching delays and buffering inside the
- `multiqueue`.
-- `alsasrc` now supports ALSA drivers without a position for each
- channel, this is common in some professional or industrial hardware.
-- `libvpx` based decoders (`vp8dec` and `vp9dec`) now create multiple threads on
- computers with multiple CPUs automatically.
-- `rfbsrc` - used for capturing from a VNC server - has seen a lot of
- debugging. It now supports the latest version of the RFB
- protocol and uses GIO everywhere.
-- `tsdemux` can now read ATSC E-AC-3 streams.
-- New `GstVideoDirection` video orientation interface for rotating, flipping
- and mirroring video in 90° steps. It is implemented by the `videoflip` and
- `glvideoflip` elements currently.
-- It is now possible to give `appsrc` a duration in time, and there is now a
- non-blocking try-pull API for `appsink` that returns NULL if nothing is
- available right now.
-- `x264enc` has support now for chroma-site and colorimetry settings
-- A new JPEG2000 parser element was added, and the JPEG2000 caps were cleaned
- up and gained more information needed in combination with RTP and various
- container formats.
-- Reverse playback support for `videorate` and `deinterlace` was implemented
-- Various improvements everywhere for reverse playback and `KEY_UNITS` trick mode
-- New cleaned up `rawaudioparse` and `rawvideoparse` elements that replace the
- old `audioparse` and `videoparse` elements. There are compatibility element
- factories registered with the old names to allow existing code to continue
- to work.
-- The Decklink plugin gained support for 10 bit video SMPTE timecodes, and
- generally got many bugfixes for various issues.
-- New API in `GstPlayer` for setting the multiview mode for stereoscopic
- video, setting an HTTP/RTSP user agent and a time offset between audio and
- video. In addition to that, there were various bugfixes and the new
- gst-examples module contains Android, iOS, GTK+ and Qt example applications.
-- `GstBin` has new API for suppressing various `GstElement` or `GstObject`
- flags that would otherwise be affected by added/removed child elements. This
- new API allows `GstBin` subclasses to handle for themselves if they
- should be considered a sink or source element, for example.
-- The `subparse` element can handle WebVTT streams now.
-- A new `sdpsrc` element was added that can read an SDP from a file, or get it
- as a string as property and then sets up an RTP pipeline accordingly.
-### Plugin moves
-No plugins were moved this cycle. We'll make up for it next cycle, promise!
-### Rewritten memory leak tracer
-GStreamer has had basic functionality to trace allocation and freeing of
-both mini-objects (buffers, events, caps, etc.) and objects in the form of the
-internal `GstAllocTrace` tracing system. This API was never exposed in the
-1.x API series though. When requested, this would dump a list of objects and
-mini-objects at exit time which had still not been freed at that point,
-enabled with an environment variable. This subsystem has now been removed
-in favour of a new implementation based on the recently-added tracing framework.
-Tracing hooks have been added to trace the creation and destruction of
-GstObjects and mini-objects, and a new tracer plugin has been written using
-those new hooks to track which objects are still live and which are not. If
-GStreamer has been compiled against the libunwind library, the new leaks tracer
-will remember where objects were allocated from as well. By default the leaks
-tracer will simply output a warning if leaks have been detected on `gst_deinit()`.
-If the `GST_LEAKS_TRACER_SIG` environment variable is set, the leaks tracer
-will also handle the following UNIX signals:
- - `SIGUSR1`: log alive objects
- - `SIGUSR2`: create a checkpoint and print a list of objects created and
- destroyed since the previous checkpoint.
-Unfortunately this will not work on Windows due to no signals, however.
-If the `GST_LEAKS_TRACER_STACK_TRACE` environment variable is set, the leaks
-tracer will also log the creation stack trace of leaked objects. This may
-significantly increase memory consumption however.
-New `MAY_BE_LEAKED` flags have been added to GstObject and GstMiniObject, so
-that objects and mini-objects that are likely to stay around forever can be
-flagged and blacklisted from the leak output.
-To give the new leak tracer a spin, simply call any GStreamer application such
-as `gst-launch-1.0` or `gst-play-1.0` like this:
- GST_TRACERS=leaks gst-launch-1.0 videotestsrc num-buffers=10 ! fakesink
-If there are any leaks, a warning will be raised at the end.
-It is also possible to trace only certain types of objects or mini-objects:
- GST_TRACERS="leaks(GstEvent,GstMessage)" gst-launch-1.0 videotestsrc num-buffers=10 ! fakesink
-This dedicated leaks tracer is much much faster than valgrind since all code is
-executed natively instead of being instrumented. This makes it very suitable
-for use on slow machines or embedded devices. It is however limited to certain
-types of leaks and won't catch memory leaks when the allocation has been made
-via plain old `malloc()` or `g_malloc()` or other means. It will also not trace
-non-GstObject GObjects.
-The goal is to enable leak tracing on GStreamer's Continuous-Integration and
-testing system, both for the regular unit tests (make check) and media tests
-(gst-validate), so that accidental leaks in common code paths can be detected
-and fixed quickly.
-For more information about the new tracer, check out Guillaume Desmottes's
-["Tracking Memory Leaks"][leaks-talk] talk or his [blog post][leaks-blog] about
-the topic.
-### GES and NLE changes
-- Clip priorities are now handled by the layers, and the GESTimelineElement
- priority property is now deprecated and unused
-- Enhanced (de)interlacing support to always use the `deinterlace` element
- and expose needed properties to users
-- Allow reusing clips children after removing the clip from a layer
-- We are now testing many more rendering formats in the gst-validate
- test suite, and failures have been fixed.
-- Also many bugs have been fixed in this cycle!
-### GStreamer validate changes
-This cycle has been focused on making GstValidate more than just a validating
-tool, but also a tool to help developers debug their GStreamer issues. When
-reporting issues, we try to gather as much information as possible and expose
-it to end users in a useful way. For an example of such enhancements, check out
-Thibault Saunier's [blog post](improving-debugging-gstreamer-validate) about
-the new Not Negotiated Error reporting mechanism.
-Playbin3 support has been added so we can run validate tests with `playbin3`
-instead of playbin.
-We are now able to properly communicate between `gst-validate-launcher` and
-launched subprocesses with actual IPC between them. That has enabled the test
-launcher to handle failing tests specifying the exact expected issue(s).
-### gst-libav changes
-gst-libav uses the recently released ffmpeg 3.2 now, which brings a lot of
-improvements and bugfixes from the ffmpeg team in addition to various new
-codec mappings on the GStreamer side and quite a few bugfixes to the GStreamer
-integration to make it more robust.
-## Build and Dependencies
-### Experimental support for Meson as build system
-#### Overview
-We have have added support for building GStreamer using the
-[Meson build system][meson]. This is currently experimental, but should work
-fine at least on Linux using the gcc or clang toolchains and on Windows using
-the MingW or MSVC toolchains.
-Autotools remains the primary build system for the time being, but we hope to
-someday replace it and will steadily work towards that goal.
-More information about the background and implications of all this and where
-we're hoping to go in future with this can be found in [Tim's mail][meson-mail]
-to the gstreamer-devel mailing list.
-For more information on Meson check out [these videos][meson-videos] and also
-the [Meson talk][meson-gstconf] at the GStreamer Conference.
-Immediate benefits for Linux users are faster builds and rebuilds. At the time
-of writing the Meson build of GStreamer is used by default in GNOME's jhbuild
-The Meson build currently still lacks many of the fine-grained configuration
-options to enable/disable specific plugins. These will be added back in due
-Note: The meson build files are not distributed in the source tarballs, you will
-need to get GStreamer from git if you want try it out.
-#### Windows Visual Studio toolchain support
-Windows users might appreciate being able to build GStreamer using the MSVC
-toolchain, which is not possible using autotools. This means that it will be
-possible to debug GStreamer and applications in Visual Studio, for example.
-We require VS2015 or newer for this at the moment.
-There are two ways to build GStreamer using the MSVC toolchain:
-1. Using the MSVC command-line tools (`cl.exe` etc.) via Meson's "ninja" backend.
-2. Letting Meson's "vs2015" backend generate Visual Studio project files that
- can be opened in Visual Studio and compiled from there.
-This is currently only for adventurous souls though. All the bits are in place,
-but support for all of this has not been merged into GStreamer's cerbero build
-tool yet at the time of writing. This will hopefully happen in the next cycle,
-but for now this means that those wishing to compile GStreamer with MSVC will
-have to get their hands dirty.
-There are also no binary SDK builds using the MSVC toolchain yet.
-For more information on GStreamer builds using Meson and the Windows toolchain
-check out Nirbheek Chauhan's blog post ["Building and developing GStreamer using Visual Studio"][msvc-blog].
-### Dependencies
-#### gstreamer
-libunwind was added as an optional dependency. It is used only for debugging
-and tracing purposes.
-The `opencv` plugin in gst-plugins-bad can now be built against OpenCV
-version 3.1, previously only 2.3-2.5 were supported.
-#### gst-plugins-ugly
-- `mpeg2dec` now requires at least libmpeg2 0.5.1 (from 2008).
-#### gst-plugins-bad
-- `gltransformation` now requires at least graphene 1.4.0.
-- `lv2` now plugin requires at least lilv 0.16 instead of slv2.
-### Packaging notes
-Packagers please note that the `gst/gstconfig.h` public header file in the
-GStreamer core library moved back from being an architecture dependent include
-to being architecture independent, and thus it is no longer installed into
-`$(libdir)/gstreamer-1.0/include/gst` but into the normal include directory
-where it lives happily ever after with all the other public header files. The
-reason for this is that we now check whether the target supports unaligned
-memory access based on predefined compiler macros at compile time instead of
-checking it at configure time.
-## Platform-specific improvements
-### Android
-#### New universal binaries for all supported ABIs
-We now provide a "universal" tarball to allow building apps against all the
-architectures currently supported (x86, x86-64, armeabi, armeabi-v7a,
-armeabi-v8a). This is needed for building with recent versions of the Android
-NDK which defaults to building against all supported ABIs. Use [the Android
-player example][android-player-example-build] as a reference for the required
-#### Miscellaneous
-- New `ahssrc` element that allows reading the hardware sensors, e.g. compass
- or accelerometer.
-### macOS (OS/X) and iOS
-- Support for querying available devices on OS/X via the GstDeviceProvider
- API was added.
-- It is now possible to create OpenGL|ES 3.x contexts on iOS and use them in
- combination with the VideoToolbox based decoder element.
-- many OpenGL/GLES improvements, see OpenGL section above
-### Windows
-- gstconfig.h: Always use dllexport/import on Windows with MSVC
-- Miscellaneous fixes to make libs and plugins compile with the MVSC toolchain
-- MSVC toolchain support (see Meson section above for more details)
-## New Modules for Documentation, Examples, Meson Build
-Three new git modules have been added recently:
-### gst-docs
-This is a new module where we will maintain documentation in the markdown
-It contains the former SDK tutorials which have kindly been made
-available by Fluendo under a Creative Commons license. The tutorials have been
-reviewed and updated for GStreamer 1.x and will be available as part of the
-[official GStreamer documentation][doc] going forward. The old
-site will then be shut down with redirects pointing to the updated tutorials.
-Some of the existing docbook XML-formatted documentation from the GStreamer
-core module such as the *Application Development Manual* and the *Plugin
-Writer's Guide* have been converted to markdown as well and will be maintained
-in the gst-docs module in future. They will be removed from the GStreamer core
-module in the next cycle.
-This is just the beginning. Our goal is to provide a more cohesive documentation
-experience for our users going forward, and easier to create and maintain
-documentation for developers. There is a lot more work to do, get in touch if
-you want to help out.
-If you encounter any problems or spot any omissions or outdated content in the
-new documentation, please [file a bug in bugzilla][doc-bug] to let us know.
-We will probably release gst-docs as a separate tarball for distributions to
-package in the next cycle.
-### gst-examples
-A new [module][examples-git] has been added for examples. It does not contain
-much yet, currently it only contains a small [http-launch][http-launch] utility
-that serves a pipeline over http as well as various [GstPlayer playback frontends][puis]
-for Android, iOS, Gtk+ and Qt.
-More examples will be added over time. The examples in this repository should
-be more useful and more substantial than most of the examples we ship as part
-of our other modules, and also written in a way that makes them good example
-code. If you have ideas for examples, let us know.
-No decision has been made yet if this module will be released and/or packaged.
-It probably makes sense to do so though.
-### gst-build
-[gst-build][gst-build-git] is a new meta module to build GStreamer using the
-new Meson build system. This module is not required to build GStreamer with
-Meson, it is merely for convenience and aims to provide a development setup
-similar to the existing `gst-uninstalled` setup.
-gst-build makes use of Meson's [subproject feature][meson-subprojects] and sets
-up the various GStreamer modules as subprojects, so they can all be updated and
-built in parallel.
-This module is still very new and highly experimental. It should work at least
-on Linux and Windows (OS/X needs some build fixes). Let us know of any issues
-you encounter by popping into the `#gstreamer` IRC channel or by
-[filing a bug][gst-build-bug].
-This module will probably not be released or packaged (does not really make sense).
-## Contributors
-Aaron Boxer, Aleix Conchillo Flaqué, Alessandro Decina, Alexandru Băluț, Alex
-Ashley, Alex-P. Natsios, Alistair Buxton, Allen Zhang, Andreas Naumann, Andrew
-Eikum, Andy Devar, Anthony G. Basile, Arjen Veenhuizen, Arnaud Vrac, Artem
-Martynovich, Arun Raghavan, Aurélien Zanelli, Barun Kumar Singh, Bernhard
-Miller, Brad Lackey, Branko Subasic, Carlos Garcia Campos, Carlos Rafael
-Giani, Christoffer Stengren, Daiki Ueno, Damian Ziobro, Danilo Cesar Lemes de
-Paula, David Buchmann, Dimitrios Katsaros, Duncan Palmer, Edward Hervey,
-Emmanuel Poitier, Enrico Jorns, Enrique Ocaña González, Fabrice Bellet,
-Florian Zwoch, Florin Apostol, Francisco Velazquez, Frédéric Bertolus, Fredrik
-Fornwall, Gaurav Gupta, George Kiagiadakis, Georg Lippitsch, Göran Jönsson,
-Graham Leggett, Gregoire Gentil, Guillaume Desmottes, Gwang Yoon Hwang, Haakon
-Sporsheim, Haihua Hu, Havard Graff, Heinrich Fink, Hoonhee Lee, Hyunjun Ko,
-Iain Lane, Ian, Ian Jamison, Jagyum Koo, Jake Foytik, Jakub Adam, Jan
-Alexander Steffens (heftig), Jan Schmidt, Javier Martinez Canillas, Jerome
-Laheurte, Jesper Larsen, Jie Jiang, Jihae Yi, Jimmy Ohn, Jinwoo Ahn, Joakim
-Johansson, Joan Pau Beltran, Jonas Holmberg, Jonathan Matthew, Jonathan Roy,
-Josep Torra, Julien Isorce, Jun Ji, Jürgen Slowack, Justin Kim, Kazunori
-Kobayashi, Kieran Bingham, Kipp Cannon, Koop Mast, Kouhei Sutou, Kseniia, Kyle
-Schwarz, Kyungyong Kim, Linus Svensson, Luis de Bethencourt, Marcin Kolny,
-Marcin Lewandowski, Marianna Smidth Buschle, Mario Sanchez Prada, Mark
-Combellack, Mark Nauwelaerts, Martin Kelly, Matej Knopp, Mathieu Duponchelle,
-Mats Lindestam, Matthew Gruenke, Matthew Waters, Michael Olbrich, Michal Lazo,
-Miguel París Díaz, Mikhail Fludkov, Minjae Kim, Mohan R, Munez, Nicola Murino,
-Nicolas Dufresne, Nicolas Huet, Nikita Bobkov, Nirbheek Chauhan, Olivier
-Crête, Paolo Pettinato, Patricia Muscalu, Paulo Neves, Peng Liu, Peter
-Seiderer, Philippe Normand, Philippe Renon, Philipp Zabel, Pierre Lamot, Piotr
-Drąg, Prashant Gotarne, Raffaele Rossi, Ray Strode, Reynaldo H. Verdejo
-Pinochet, Santiago Carot-Nemesio, Scott D Phillips, Sebastian Dröge, Sebastian
-Rasmussen, Sergei Saveliev, Sergey Borovkov, Sergey Mamonov, Sergio Torres
-Soldado, Seungha Yang, sezero, Song Bing, Sreerenj Balachandran, Stefan Sauer,
-Stephen, Steven Hoving, Stian Selnes, Thiago Santos, Thibault Saunier, Thijs
-Vermeir, Thomas Bluemel, Thomas Jones, Thomas Klausner, Thomas Scheuermann,
-Tim-Philipp Müller, Ting-Wei Lan, Tom Schoonjans, Ursula Maplehurst, Vanessa
-Chipirras Navalon, Víctor Manuel Jáquez Leal, Vincent Penquerc'h, Vineeth TM,
-Vivia Nikolaidou, Vootele Vesterblom, Wang Xin-yu (王昕宇), William Manley,
-Wim Taymans, Wonchul Lee, Xabier Rodriguez Calvar, Xavier Claessens, xlazom00,
-Yann Jouanin, Zaheer Abbas Merali
-... and many others who have contributed bug reports, translations, sent
-suggestions or helped testing.
-## Bugs fixed in 1.10
-More than [750 bugs][bugs-fixed-in-1.10] have been fixed during
-the development of 1.10.
-This list does not include issues that have been cherry-picked into the
-stable 1.8 branch and fixed there as well, all fixes that ended up in the
-1.8 branch are also included in 1.10.
-This list also does not include issues that have been fixed without a bug
-report in bugzilla, so the actual number of fixes is much higher.
-## Stable 1.10 branch
-After the 1.10.0 release there will be several 1.10.x bug-fix releases which
-will contain bug fixes which have been deemed suitable for a stable branch,
-but no new features or intrusive changes will be added to a bug-fix release
-usually. The 1.10.x bug-fix releases will be made from the git 1.10 branch,
-which is a stable branch.
-### 1.10.0
-1.10.0 was released on 1st November 2016.
-## Known Issues
-- iOS builds with iOS 6 SDK and old C++ STL. You need to select iOS 6 instead
- of 7 or 8 in your projects settings to be able to link applications.
- [Bug #766366](
-- Code signing for Apple platforms has some problems currently, requiring
- manual work to get your application signed. [Bug #771860](
-- Building applications with Android NDK r13 on Windows does not work. Other
- platforms and earlier/later versions of the NDK are not affected.
- [Bug #772842](
-- The new leaks tracer may deadlock the application (or exhibit other undefined
- behaviour) when `SIGUSR` handling is enabled via the `GST_LEAKS_TRACER_SIG`
- environment variable. [Bug #770373](
-- vp8enc crashes on 32 bit Windows, but was working fine in 1.6. 64 bit Windows is unaffected.
- [Bug #763663](
-## Schedule for 1.12
-Our next major feature release will be 1.12, and 1.11 will be the unstable
-development version leading up to the stable 1.12 release. The development
-of 1.11/1.12 will happen in the git master branch.
-The plan for the 1.12 development cycle is yet to be confirmed, but it is
-expected that feature freeze will be around early/mid-January,
-followed by several 1.11 pre-releases and the new 1.12 stable release
-in March.
-1.12 will be backwards-compatible to the stable 1.10, 1.8, 1.6, 1.4, 1.2 and
-1.0 release series.
-- - -
-*These release notes have been prepared by Olivier Crête, Sebastian Dröge,
-Nicolas Dufresne, Edward Hervey, Víctor Manuel Jáquez Leal, Tim-Philipp
-Müller, Reynaldo H. Verdejo Pinochet, Arun Raghavan, Thibault Saunier,
-Jan Schmidt, Wim Taymans, Matthew Waters*
-*License: [CC BY-SA 4.0](*
+This is GStreamer 1.11.1.
diff --git a/ b/
index b8124a6d..ce1424a9 100644
--- a/
+++ b/
@@ -1,8 +1,8 @@
# gstreamer-vaapi package version number
m4_define([gst_vaapi_major_version], [1])
m4_define([gst_vaapi_minor_version], [11])
-m4_define([gst_vaapi_micro_version], [0])
-m4_define([gst_vaapi_nano_version], [1])
+m4_define([gst_vaapi_micro_version], [1])
+m4_define([gst_vaapi_nano_version], [0])
m4_if(gst_vaapi_nano_version, [0], [],
@@ -16,17 +16,17 @@ dnl - interfaces added/removed/changed -> increment CURRENT, REVISION = 0
dnl - interfaces added -> increment AGE
dnl - interfaces removed -> AGE = 0
# gstreamer-vaapi library (libtool) version number
-m4_define([gst_vaapi_lt_current], [1100])
+m4_define([gst_vaapi_lt_current], [1101])
m4_define([gst_vaapi_lt_revision], [0])
-m4_define([gst_vaapi_lt_age], [1100])
+m4_define([gst_vaapi_lt_age], [1101])
# glib version number
m4_define([glib_version], [2.40])
# gstreamer version number
-m4_define([gst_version], [])
-m4_define([gst_plugins_base_version], [])
-m4_define([gst_plugins_bad_version], [])
+m4_define([gst_version], [1.11.1])
+m4_define([gst_plugins_base_version], [1.11.1])
+m4_define([gst_plugins_bad_version], [1.11.1])
# Wayland minimum version number
m4_define([wayland_api_version], [1.0.2])
diff --git a/gstreamer-vaapi.doap b/gstreamer-vaapi.doap
index 2592dd06..d51583bc 100644
--- a/gstreamer-vaapi.doap
+++ b/gstreamer-vaapi.doap
@@ -27,6 +27,16 @@
+ <revision>1.11.1</revision>
+ <branch>master</branch>
+ <name></name>
+ <created>2017-01-12</created>
+ <file-release rdf:resource="" />
+ </Version>
+ </release>
+ <release>
+ <Version>