diff options
Diffstat (limited to 'ChangeLog')
| -rw-r--r-- | ChangeLog | 348 |
1 files changed, 346 insertions, 2 deletions
@@ -1,9 +1,353 @@ +=== release 1.12.4 === + +2017-12-07 Sebastian Dröge <slomo@coaxion.net> + + * configure.ac: + releasing 1.12.4 + +2017-12-07 19:03:58 +0200 Sebastian Dröge <sebastian@centricular.com> + + * po/el.po: + * po/nl.po: + po: Update translations + +2017-12-07 11:15:19 +0000 Tim-Philipp Müller <tim@centricular.com> + + * gst/audioparsers/gstflacparse.c: + * gst/audioparsers/gstflacparse.h: + Revert "flacparse: fix header rewriting being ignored" + This caused broken metadata and also looks a bit dodgy. + Revert until we can figure out a solution that works for + all cases and doesn't break anything. + This reverts commit adeee44b07a173b9ab4253216caba8f66dd43abb. + https://bugzilla.gnome.org/show_bug.cgi?id=727802 + https://bugzilla.gnome.org/show_bug.cgi?id=785558 + +2017-08-25 11:57:26 +0200 Haakon Sporsheim <haakon@pexip.com> + + * gst/rtpmanager/rtpsession.c: + rtpsession: Handle zero length feedback packets + https://bugzilla.gnome.org/show_bug.cgi?id=791074 + +2017-07-10 15:19:34 +0200 Florian Zwoch <fzwoch@gmail.com> + + * gst/isomp4/qtdemux.c: + qtdemux: fix debug log for 'hvcC' codec_data + https://bugzilla.gnome.org/show_bug.cgi?id=784749 + +2017-11-23 07:59:07 +0100 Edward Hervey <edward@centricular.com> + + * gst/replaygain/rganalysis.c: + rganalysis: Fix left shift of signed values + left shifting signed values is undefined. + Instead of doing "x << offs" which is undefined, do the equivalent + "x * (1 << offs)" which is well defined + +2017-11-24 10:36:01 +0200 Sebastian Dröge <sebastian@centricular.com> + + * gst/audioparsers/gstflacparse.c: + flacparse: Request at least the full header size when parsing headers + Otherwise baseparse will incrementally send us bigger buffers until the + full header size is reached, which is not only pointless but also means + that baseparse will reallocate and copy into a bigger buffer for every + input buffers. In pull mode that's done in 64kb increments, in push mode + usually in much smaller increments, causing a lot of overhead for + example when parsing high-quality coverart. + +2017-10-22 18:26:12 +0800 Jun Xie <jun.xie@samsung.com> + + * gst/isomp4/qtdemux.c: + qtdemux: reset reused QtDemuxStream while parsing a new 'trak' + if QtDemuxStream is reused, then we need to reset it. + https://bugzilla.gnome.org/show_bug.cgi?id=788759 + +2017-11-18 02:01:58 +1100 Jan Schmidt <jan@centricular.com> + + * gst/multifile/gstsplitmuxpartreader.c: + splitmuxsrc: Don't return FALSE from event handling. + Returning FALSE because we drop an event means that + internal sources like qtdemux might throw an error + and break the whole pipeline. The only time it can + happen is either flushing or shutdown, and those + will be handled anyway. + +2017-03-13 18:14:12 +0900 paul.kim <paul.hyunil@lge.com> + + * ext/soup/gstsouphttpsrc.c: + souphttpsrc: Remove range header when seek to 0 + This fixes the previous range header is remained if seek to 0 is + attempted. + https://bugzilla.gnome.org/show_bug.cgi?id=779957 + +2017-06-20 16:28:35 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> + + * tests/files/test-cert.pem: + tests: souphttpsrc: Update test-cert.pem + Recent GnuTLS disregards the Common Name and only looks at the Subject + Alternative Name extension. Since our test-cert has no SAN extension, + validation fails. + Generate a new certificate with SAN. In addition to 127.0.0.1, for good + measure make it valid for localhost and ::1, too. + https://bugzilla.gnome.org/show_bug.cgi?id=784005 + +2017-06-20 16:39:36 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> + + * tests/check/elements/souphttpsrc.c: + tests: souphttpsrc: Avoid deprecated ssl-ca-file property + SoupSession's ssl-ca-file property is deprecated. Use the recommended + tls-database property. + This is a bit more complex as it requires creating a GTlsFileDatabase + object for an absolute (!) path to the CA certificates file. + https://bugzilla.gnome.org/show_bug.cgi?id=784005 + +2017-06-20 16:37:55 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> + + * tests/check/elements/souphttpsrc.c: + tests: souphttpsrc: Avoid deprecated server ssl properties + The ssl-cert-file and ssl-key-file properties are deprecated. Use the + soup_server_set_ssl_cert_file function to load the files. + https://bugzilla.gnome.org/show_bug.cgi?id=784005 + +2017-06-20 16:34:41 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> + + * tests/check/elements/souphttpsrc.c: + tests: souphttpsrc: Make ssl_cert/key_file static + Just a bit of cleanup. + https://bugzilla.gnome.org/show_bug.cgi?id=784005 + +2017-11-08 16:34:01 +0100 Edward Hervey <edward@centricular.com> + + * ext/soup/gstsouphttpsrc.c: + souphttpsrc: Fix seeking back to 0 + This is a regression introduced by "03db374 - souphttpsrc: retry + request on early termination from the server" + The problem was that when seeking back to 0, we would not end up calling + add_range_header() which in addition to adding range headers *ALSO* sets + the read_position to the requested one. + This would result in a wide variety of later failures, like reading + again and again instead of stopping properly. + +2017-11-06 21:13:34 +0100 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> + + * sys/v4l2/gstv4l2deviceprovider.c: + v4l2deviceprovider: Add missing V4L2_CAP_TOUCH + This define was only added in Linux 4.8. This commit is for the stable + branch only, since we want to avoid bumping the v4l headers in fear of + regressions. + https://bugzilla.gnome.org/show_bug.cgi?id=789197 + +2017-10-19 14:02:37 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> + + * sys/v4l2/gstv4l2deviceprovider.c: + v4l2deviceprovider: Ignore touch sensing devices + With GST_V4L2_USE_LIBV4L2=1, my laptop's touchpad shows up as a video + source device in gst-device-monitor, but attempting to stream from it + fails because the device doesn't actually support any video formats. + name : Synaptics RMI4 Touch Sensor + class : Video/Source + caps : video/x-raw, format=(string)I420, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; + video/x-raw, format=(string)YV12, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; + video/x-raw, format=(string)BGR, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; + video/x-raw, format=(string)RGB, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1; + properties: + udev-probed = true + device.bus_path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0 + sysfs.path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0 + device.subsystem = video4linux + device.product.name = "Synaptics\ RMI4\ Touch\ Sensor" + device.capabilities = :capture: + device.api = v4l2 + device.path = /dev/v4l-touch0 + v4l2.device.driver = rmi4_f54 + v4l2.device.card = "Synaptics\ RMI4\ Touch\ Sensor" + v4l2.device.bus_info = rmi4:rmi4-00.fn54 + v4l2.device.version = 265480 (0x00040d08) + v4l2.device.capabilities = 2501902337 (0x95200001) + v4l2.device.device_caps = 354418689 (0x15200001) + gst-launch-1.0 v4l2src device=/dev/v4l-touch0 ! ... + v4l2-ctl -d /dev/v4l-touch0 --list-formats reports: + ioctl: VIDIOC_ENUM_FMT + Index : 0 + Type : Video Capture + Pixel Format: 'TD16' + Name : 16-bit signed deltas + Index : 1 + Type : Video Capture + Pixel Format: 'TD08' + Name : 8-bit signed deltas + Index : 2 + Type : Video Capture + Pixel Format: 'TU16' + Name : 16-bit unsigned touch data + https://bugzilla.gnome.org/show_bug.cgi?id=789197 + +2017-09-23 15:41:30 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com> + + * gst/flv/gstflvdemux.c: + flvdemux: Ignore invalid H.264 codec data + This code basically skip over codec_data with empty payload. In + this case, the codec_data variable is the size of the header for + the CODEC part of Video Tag. The remaining is supposed to be the + H.264 codec data, hence should not be empty. + https://bugzilla.gnome.org/show_bug.cgi?id=787795 + +2017-09-24 14:35:01 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com> + + * gst/flv/gstflvdemux.c: + flvdemux: Only set pixel-aspect-ratio if specified + If it's not specified, we should let the decoder figure it out. + Apparently the code was already in place, all was to make the code + conditional. + https://bugzilla.gnome.org/show_bug.cgi?id=787795 + +2017-09-23 15:44:09 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com> + + * gst/flv/gstflvdemux.c: + flvdemux: Don't pull passed the EOS + When a truncated FLV is provided and processed in pull mode, we + may endup trying to pull passed EOS, causing a rather confusing + warning as the pull offset is an integer overflow. + https://bugzilla.gnome.org/show_bug.cgi?id=787795 + +2017-09-23 15:38:07 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com> + + * gst/flv/gstflvdemux.c: + flvdemux: Avoid integer overflow on invalid CTS + If the CTS is negative an would lead to a negtive PTS, clip + the CTS so the PTS will be 0. + https://bugzilla.gnome.org/show_bug.cgi?id=787795 + +2017-10-01 16:09:13 +0200 Sebastian Dröge <sebastian@centricular.com> + + * gst/rtsp/gstrtspsrc.c: + rtspsrc: Ignore medias marked as sendonly + We're never going to receive anything from them, so don't create pads + for them. These medias are destinations where *we* could send something. + === release 1.12.3 === -2017-09-18 Sebastian Dröge <slomo@coaxion.net> +2017-09-18 17:47:44 +0300 Sebastian Dröge <sebastian@centricular.com> + * ChangeLog: + * NEWS: + * RELEASE: * configure.ac: - releasing 1.12.3 + * docs/plugins/gst-plugins-good-plugins.args: + * docs/plugins/inspect/plugin-1394.xml: + * docs/plugins/inspect/plugin-aasink.xml: + * docs/plugins/inspect/plugin-alaw.xml: + * docs/plugins/inspect/plugin-alpha.xml: + * docs/plugins/inspect/plugin-alphacolor.xml: + * docs/plugins/inspect/plugin-apetag.xml: + * docs/plugins/inspect/plugin-audiofx.xml: + * docs/plugins/inspect/plugin-audioparsers.xml: + * docs/plugins/inspect/plugin-auparse.xml: + * docs/plugins/inspect/plugin-autodetect.xml: + * docs/plugins/inspect/plugin-avi.xml: + * docs/plugins/inspect/plugin-cacasink.xml: + * docs/plugins/inspect/plugin-cairo.xml: + * docs/plugins/inspect/plugin-cutter.xml: + * docs/plugins/inspect/plugin-debug.xml: + * docs/plugins/inspect/plugin-deinterlace.xml: + * docs/plugins/inspect/plugin-dtmf.xml: + * docs/plugins/inspect/plugin-dv.xml: + * docs/plugins/inspect/plugin-effectv.xml: + * docs/plugins/inspect/plugin-equalizer.xml: + * docs/plugins/inspect/plugin-flac.xml: + * docs/plugins/inspect/plugin-flv.xml: + * docs/plugins/inspect/plugin-flxdec.xml: + * docs/plugins/inspect/plugin-gdkpixbuf.xml: + * docs/plugins/inspect/plugin-goom.xml: + * docs/plugins/inspect/plugin-goom2k1.xml: + * docs/plugins/inspect/plugin-icydemux.xml: + * docs/plugins/inspect/plugin-id3demux.xml: + * docs/plugins/inspect/plugin-imagefreeze.xml: + * docs/plugins/inspect/plugin-interleave.xml: + * docs/plugins/inspect/plugin-isomp4.xml: + * docs/plugins/inspect/plugin-jack.xml: + * docs/plugins/inspect/plugin-jpeg.xml: + * docs/plugins/inspect/plugin-level.xml: + * docs/plugins/inspect/plugin-matroska.xml: + * docs/plugins/inspect/plugin-mulaw.xml: + * docs/plugins/inspect/plugin-multifile.xml: + * docs/plugins/inspect/plugin-multipart.xml: + * docs/plugins/inspect/plugin-navigationtest.xml: + * docs/plugins/inspect/plugin-oss4.xml: + * docs/plugins/inspect/plugin-ossaudio.xml: + * docs/plugins/inspect/plugin-png.xml: + * docs/plugins/inspect/plugin-pulseaudio.xml: + * docs/plugins/inspect/plugin-replaygain.xml: + * docs/plugins/inspect/plugin-rtp.xml: + * docs/plugins/inspect/plugin-rtpmanager.xml: + * docs/plugins/inspect/plugin-rtsp.xml: + * docs/plugins/inspect/plugin-shapewipe.xml: + * docs/plugins/inspect/plugin-shout2.xml: + * docs/plugins/inspect/plugin-smpte.xml: + * docs/plugins/inspect/plugin-soup.xml: + * docs/plugins/inspect/plugin-spectrum.xml: + * docs/plugins/inspect/plugin-speex.xml: + * docs/plugins/inspect/plugin-taglib.xml: + * docs/plugins/inspect/plugin-udp.xml: + * docs/plugins/inspect/plugin-video4linux2.xml: + * docs/plugins/inspect/plugin-videobox.xml: + * docs/plugins/inspect/plugin-videocrop.xml: + * docs/plugins/inspect/plugin-videofilter.xml: + * docs/plugins/inspect/plugin-videomixer.xml: + * docs/plugins/inspect/plugin-vpx.xml: + * docs/plugins/inspect/plugin-wavenc.xml: + * docs/plugins/inspect/plugin-wavpack.xml: + * docs/plugins/inspect/plugin-wavparse.xml: + * docs/plugins/inspect/plugin-ximagesrc.xml: + * docs/plugins/inspect/plugin-y4menc.xml: + * gst-plugins-good.doap: + * meson.build: + Release 1.12.3 + +2017-09-18 16:10:39 +0300 Sebastian Dröge <sebastian@centricular.com> + + * po/af.po: + * po/az.po: + * po/bg.po: + * po/ca.po: + * po/cs.po: + * po/da.po: + * po/de.po: + * po/el.po: + * po/en_GB.po: + * po/eo.po: + * po/es.po: + * po/eu.po: + * po/fi.po: + * po/fr.po: + * po/fur.po: + * po/gl.po: + * po/hr.po: + * po/hu.po: + * po/id.po: + * po/it.po: + * po/ja.po: + * po/lt.po: + * po/lv.po: + * po/mt.po: + * po/nb.po: + * po/nl.po: + * po/or.po: + * po/pl.po: + * po/pt_BR.po: + * po/ro.po: + * po/ru.po: + * po/sk.po: + * po/sl.po: + * po/sq.po: + * po/sr.po: + * po/sv.po: + * po/tr.po: + * po/uk.po: + * po/vi.po: + * po/zh_CN.po: + * po/zh_HK.po: + * po/zh_TW.po: + Update .po files 2017-09-18 16:01:18 +0300 Sebastian Dröge <sebastian@centricular.com> |