summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-bcm-kona.c
blob: 572aebbb254e711702d83b59f4ecd56240234fad (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
/*
 * Copyright (C) 2013 Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation version 2.
 *
 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 * kind, whether express or implied; without even the implied warranty
 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>

/* Hardware register offsets and field defintions */
#define CS_OFFSET				0x00000020
#define CS_ACK_SHIFT				3
#define CS_ACK_MASK				0x00000008
#define CS_ACK_CMD_GEN_START			0x00000000
#define CS_ACK_CMD_GEN_RESTART			0x00000001
#define CS_CMD_SHIFT				1
#define CS_CMD_CMD_NO_ACTION			0x00000000
#define CS_CMD_CMD_START_RESTART		0x00000001
#define CS_CMD_CMD_STOP				0x00000002
#define CS_EN_SHIFT				0
#define CS_EN_CMD_ENABLE_BSC			0x00000001

#define TIM_OFFSET				0x00000024
#define TIM_PRESCALE_SHIFT			6
#define TIM_P_SHIFT				3
#define TIM_NO_DIV_SHIFT			2
#define TIM_DIV_SHIFT				0

#define DAT_OFFSET				0x00000028

#define TOUT_OFFSET				0x0000002c

#define TXFCR_OFFSET				0x0000003c
#define TXFCR_FIFO_FLUSH_MASK			0x00000080
#define TXFCR_FIFO_EN_MASK			0x00000040

#define IER_OFFSET				0x00000044
#define IER_READ_COMPLETE_INT_MASK		0x00000010
#define IER_I2C_INT_EN_MASK			0x00000008
#define IER_FIFO_INT_EN_MASK			0x00000002
#define IER_NOACK_EN_MASK			0x00000001

#define ISR_OFFSET				0x00000048
#define ISR_RESERVED_MASK			0xffffff60
#define ISR_CMDBUSY_MASK			0x00000080
#define ISR_READ_COMPLETE_MASK			0x00000010
#define ISR_SES_DONE_MASK			0x00000008
#define ISR_ERR_MASK				0x00000004
#define ISR_TXFIFOEMPTY_MASK			0x00000002
#define ISR_NOACK_MASK				0x00000001

#define CLKEN_OFFSET				0x0000004C
#define CLKEN_AUTOSENSE_OFF_MASK		0x00000080
#define CLKEN_M_SHIFT				4
#define CLKEN_N_SHIFT				1
#define CLKEN_CLKEN_MASK			0x00000001

#define FIFO_STATUS_OFFSET			0x00000054
#define FIFO_STATUS_RXFIFO_EMPTY_MASK		0x00000004
#define FIFO_STATUS_TXFIFO_EMPTY_MASK		0x00000010

#define HSTIM_OFFSET				0x00000058
#define HSTIM_HS_MODE_MASK			0x00008000
#define HSTIM_HS_HOLD_SHIFT			10
#define HSTIM_HS_HIGH_PHASE_SHIFT		5
#define HSTIM_HS_SETUP_SHIFT			0

#define PADCTL_OFFSET				0x0000005c
#define PADCTL_PAD_OUT_EN_MASK			0x00000004

#define RXFCR_OFFSET				0x00000068
#define RXFCR_NACK_EN_SHIFT			7
#define RXFCR_READ_COUNT_SHIFT			0
#define RXFIFORDOUT_OFFSET			0x0000006c

/* Locally used constants */
#define MAX_RX_FIFO_SIZE		64U /* bytes */
#define MAX_TX_FIFO_SIZE		64U /* bytes */

#define STD_EXT_CLK_FREQ		13000000UL
#define HS_EXT_CLK_FREQ			104000000UL

#define MASTERCODE			0x08 /* Mastercodes are 0000_1xxxb */

#define I2C_TIMEOUT			100 /* msecs */

/* Operations that can be commanded to the controller */
enum bcm_kona_cmd_t {
	BCM_CMD_NOACTION = 0,
	BCM_CMD_START,
	BCM_CMD_RESTART,
	BCM_CMD_STOP,
};

enum bus_speed_index {
	BCM_SPD_100K = 0,
	BCM_SPD_400K,
	BCM_SPD_1MHZ,
};

enum hs_bus_speed_index {
	BCM_SPD_3P4MHZ = 0,
};

/* Internal divider settings for standard mode, fast mode and fast mode plus */
struct bus_speed_cfg {
	uint8_t time_m;		/* Number of cycles for setup time */
	uint8_t time_n;		/* Number of cycles for hold time */
	uint8_t prescale;	/* Prescale divider */
	uint8_t time_p;		/* Timing coefficient */
	uint8_t no_div;		/* Disable clock divider */
	uint8_t time_div;	/* Post-prescale divider */
};

/* Internal divider settings for high-speed mode */
struct hs_bus_speed_cfg {
	uint8_t hs_hold;	/* Number of clock cycles SCL stays low until
				   the end of bit period */
	uint8_t hs_high_phase;	/* Number of clock cycles SCL stays high
				   before it falls */
	uint8_t hs_setup;	/* Number of clock cycles SCL stays low
				   before it rises  */
	uint8_t prescale;	/* Prescale divider */
	uint8_t time_p;		/* Timing coefficient */
	uint8_t no_div;		/* Disable clock divider */
	uint8_t time_div;	/* Post-prescale divider */
};

static const struct bus_speed_cfg std_cfg_table[] = {
	[BCM_SPD_100K] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02},
	[BCM_SPD_400K] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02},
	[BCM_SPD_1MHZ] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03},
};

static const struct hs_bus_speed_cfg hs_cfg_table[] = {
	[BCM_SPD_3P4MHZ] = {0x01, 0x08, 0x14, 0x00, 0x06, 0x01, 0x00},
};

struct bcm_kona_i2c_dev {
	struct device *device;

	void __iomem *base;
	int irq;
	struct clk *external_clk;

	struct i2c_adapter adapter;

	struct completion done;

	const struct bus_speed_cfg *std_cfg;
	const struct hs_bus_speed_cfg *hs_cfg;
};

static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev,
					  enum bcm_kona_cmd_t cmd)
{
	dev_dbg(dev->device, "%s, %d\n", __func__, cmd);

	switch (cmd) {
	case BCM_CMD_NOACTION:
		writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) |
		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
		       dev->base + CS_OFFSET);
		break;

	case BCM_CMD_START:
		writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) |
		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
		       dev->base + CS_OFFSET);
		break;

	case BCM_CMD_RESTART:
		writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) |
		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
		       dev->base + CS_OFFSET);
		break;

	case BCM_CMD_STOP:
		writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) |
		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
		       dev->base + CS_OFFSET);
		break;

	default:
		dev_err(dev->device, "Unknown command %d\n", cmd);
	}
}

static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev)
{
	writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK,
	       dev->base + CLKEN_OFFSET);
}

static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev)
{
	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK,
	       dev->base + CLKEN_OFFSET);
}

static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
{
	struct bcm_kona_i2c_dev *dev = devid;
	uint32_t status = readl(dev->base + ISR_OFFSET);

	if ((status & ~ISR_RESERVED_MASK) == 0)
		return IRQ_NONE;

	/* Must flush the TX FIFO when NAK detected */
	if (status & ISR_NOACK_MASK)
		writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
		       dev->base + TXFCR_OFFSET);

	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
	complete(&dev->done);

	return IRQ_HANDLED;
}

/* Wait for ISR_CMDBUSY_MASK to go low before writing to CS, DAT, or RCD */
static int bcm_kona_i2c_wait_if_busy(struct bcm_kona_i2c_dev *dev)
{
	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);

	while (readl(dev->base + ISR_OFFSET) & ISR_CMDBUSY_MASK)
		if (time_after(jiffies, timeout)) {
			dev_err(dev->device, "CMDBUSY timeout\n");
			return -ETIMEDOUT;
		}

	return 0;
}

/* Send command to I2C bus */
static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev,
				 enum bcm_kona_cmd_t cmd)
{
	int rc;
	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);

	/* Make sure the hardware is ready */
	rc = bcm_kona_i2c_wait_if_busy(dev);
	if (rc < 0)
		return rc;

	/* Unmask the session done interrupt */
	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);

	/* Mark as incomplete before sending the command */
	reinit_completion(&dev->done);

	/* Send the command */
	bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd);

	/* Wait for transaction to finish or timeout */
	time_left = wait_for_completion_timeout(&dev->done, time_left);

	/* Mask all interrupts */
	writel(0, dev->base + IER_OFFSET);

	if (!time_left) {
		dev_err(dev->device, "controller timed out\n");
		rc = -ETIMEDOUT;
	}

	/* Clear command */
	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);

	return rc;
}

/* Read a single RX FIFO worth of data from the i2c bus */
static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
					 uint8_t *buf, unsigned int len,
					 unsigned int last_byte_nak)
{
	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);

	/* Mark as incomplete before starting the RX FIFO */
	reinit_completion(&dev->done);

	/* Unmask the read complete interrupt */
	writel(IER_READ_COMPLETE_INT_MASK, dev->base + IER_OFFSET);

	/* Start the RX FIFO */
	writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) |
	       (len << RXFCR_READ_COUNT_SHIFT),
		dev->base + RXFCR_OFFSET);

	/* Wait for FIFO read to complete */
	time_left = wait_for_completion_timeout(&dev->done, time_left);

	/* Mask all interrupts */
	writel(0, dev->base + IER_OFFSET);

	if (!time_left) {
		dev_err(dev->device, "RX FIFO time out\n");
		return -EREMOTEIO;
	}

	/* Read data from FIFO */
	for (; len > 0; len--, buf++)
		*buf = readl(dev->base + RXFIFORDOUT_OFFSET);

	return 0;
}

/* Read any amount of data using the RX FIFO from the i2c bus */
static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
				  struct i2c_msg *msg)
{
	unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
	unsigned int last_byte_nak = 0;
	unsigned int bytes_read = 0;
	int rc;

	uint8_t *tmp_buf = msg->buf;

	while (bytes_read < msg->len) {
		if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) {
			last_byte_nak = 1; /* NAK last byte of transfer */
			bytes_to_read = msg->len - bytes_read;
		}

		rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read,
						   last_byte_nak);
		if (rc < 0)
			return -EREMOTEIO;

		bytes_read += bytes_to_read;
		tmp_buf += bytes_to_read;
	}

	return 0;
}

/* Write a single byte of data to the i2c bus */
static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data,
				   unsigned int nak_expected)
{
	int rc;
	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
	unsigned int nak_received;

	/* Make sure the hardware is ready */
	rc = bcm_kona_i2c_wait_if_busy(dev);
	if (rc < 0)
		return rc;

	/* Clear pending session done interrupt */
	writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET);

	/* Unmask the session done interrupt */
	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);

	/* Mark as incomplete before sending the data */
	reinit_completion(&dev->done);

	/* Send one byte of data */
	writel(data, dev->base + DAT_OFFSET);

	/* Wait for byte to be written */
	time_left = wait_for_completion_timeout(&dev->done, time_left);

	/* Mask all interrupts */
	writel(0, dev->base + IER_OFFSET);

	if (!time_left) {
		dev_dbg(dev->device, "controller timed out\n");
		return -ETIMEDOUT;
	}

	nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0;

	if (nak_received ^ nak_expected) {
		dev_dbg(dev->device, "unexpected NAK/ACK\n");
		return -EREMOTEIO;
	}

	return 0;
}

/* Write a single TX FIFO worth of data to the i2c bus */
static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
					  uint8_t *buf, unsigned int len)
{
	int k;
	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
	unsigned int fifo_status;

	/* Mark as incomplete before sending data to the TX FIFO */
	reinit_completion(&dev->done);

	/* Unmask the fifo empty and nak interrupt */
	writel(IER_FIFO_INT_EN_MASK | IER_NOACK_EN_MASK,
	       dev->base + IER_OFFSET);

	/* Disable IRQ to load a FIFO worth of data without interruption */
	disable_irq(dev->irq);

	/* Write data into FIFO */
	for (k = 0; k < len; k++)
		writel(buf[k], (dev->base + DAT_OFFSET));

	/* Enable IRQ now that data has been loaded */
	enable_irq(dev->irq);

	/* Wait for FIFO to empty */
	do {
		time_left = wait_for_completion_timeout(&dev->done, time_left);
		fifo_status = readl(dev->base + FIFO_STATUS_OFFSET);
	} while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK));

	/* Mask all interrupts */
	writel(0, dev->base + IER_OFFSET);

	/* Check if there was a NAK */
	if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) {
		dev_err(dev->device, "unexpected NAK\n");
		return -EREMOTEIO;
	}

	/* Check if a timeout occured */
	if (!time_left) {
		dev_err(dev->device, "completion timed out\n");
		return -EREMOTEIO;
	}

	return 0;
}


/* Write any amount of data using TX FIFO to the i2c bus */
static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
				   struct i2c_msg *msg)
{
	unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
	unsigned int bytes_written = 0;
	int rc;

	uint8_t *tmp_buf = msg->buf;

	while (bytes_written < msg->len) {
		if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE)
			bytes_to_write = msg->len - bytes_written;

		rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf,
						    bytes_to_write);
		if (rc < 0)
			return -EREMOTEIO;

		bytes_written += bytes_to_write;
		tmp_buf += bytes_to_write;
	}

	return 0;
}

/* Send i2c address */
static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
				     struct i2c_msg *msg)
{
	unsigned char addr;

	if (msg->flags & I2C_M_TEN) {
		/* First byte is 11110XX0 where XX is upper 2 bits */
		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
			return -EREMOTEIO;

		/* Second byte is the remaining 8 bits */
		addr = msg->addr & 0xFF;
		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
			return -EREMOTEIO;

		if (msg->flags & I2C_M_RD) {
			/* For read, send restart command */
			if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0)
				return -EREMOTEIO;

			/* Then re-send the first byte with the read bit set */
			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
			if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
				return -EREMOTEIO;
		}
	} else {
		addr = i2c_8bit_addr_from_msg(msg);

		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
			return -EREMOTEIO;
	}

	return 0;
}

static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev)
{
	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK,
	       dev->base + CLKEN_OFFSET);
}

static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
{
	writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK,
	       dev->base + HSTIM_OFFSET);

	writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) |
	       (dev->std_cfg->time_p << TIM_P_SHIFT) |
	       (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) |
	       (dev->std_cfg->time_div	<< TIM_DIV_SHIFT),
	       dev->base + TIM_OFFSET);

	writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) |
	       (dev->std_cfg->time_n << CLKEN_N_SHIFT) |
	       CLKEN_CLKEN_MASK,
	       dev->base + CLKEN_OFFSET);
}

static void bcm_kona_i2c_config_timing_hs(struct bcm_kona_i2c_dev *dev)
{
	writel((dev->hs_cfg->prescale << TIM_PRESCALE_SHIFT) |
	       (dev->hs_cfg->time_p << TIM_P_SHIFT) |
	       (dev->hs_cfg->no_div << TIM_NO_DIV_SHIFT) |
	       (dev->hs_cfg->time_div << TIM_DIV_SHIFT),
	       dev->base + TIM_OFFSET);

	writel((dev->hs_cfg->hs_hold << HSTIM_HS_HOLD_SHIFT) |
	       (dev->hs_cfg->hs_high_phase << HSTIM_HS_HIGH_PHASE_SHIFT) |
	       (dev->hs_cfg->hs_setup << HSTIM_HS_SETUP_SHIFT),
	       dev->base + HSTIM_OFFSET);

	writel(readl(dev->base + HSTIM_OFFSET) | HSTIM_HS_MODE_MASK,
	       dev->base + HSTIM_OFFSET);
}

static int bcm_kona_i2c_switch_to_hs(struct bcm_kona_i2c_dev *dev)
{
	int rc;

	/* Send mastercode at standard speed */
	rc = bcm_kona_i2c_write_byte(dev, MASTERCODE, 1);
	if (rc < 0) {
		pr_err("High speed handshake failed\n");
		return rc;
	}

	/* Configure external clock to higher frequency */
	rc = clk_set_rate(dev->external_clk, HS_EXT_CLK_FREQ);
	if (rc) {
		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
			__func__, rc);
		return rc;
	}

	/* Reconfigure internal dividers */
	bcm_kona_i2c_config_timing_hs(dev);

	/* Send a restart command */
	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
	if (rc < 0)
		dev_err(dev->device, "High speed restart command failed\n");

	return rc;
}

static int bcm_kona_i2c_switch_to_std(struct bcm_kona_i2c_dev *dev)
{
	int rc;

	/* Reconfigure internal dividers */
	bcm_kona_i2c_config_timing(dev);

	/* Configure external clock to lower frequency */
	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
	if (rc) {
		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
			__func__, rc);
	}

	return rc;
}

/* Master transfer function */
static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter,
			     struct i2c_msg msgs[], int num)
{
	struct bcm_kona_i2c_dev *dev = i2c_get_adapdata(adapter);
	struct i2c_msg *pmsg;
	int rc = 0;
	int i;

	rc = clk_prepare_enable(dev->external_clk);
	if (rc) {
		dev_err(dev->device, "%s: peri clock enable failed. err %d\n",
			__func__, rc);
		return rc;
	}

	/* Enable pad output */
	writel(0, dev->base + PADCTL_OFFSET);

	/* Enable internal clocks */
	bcm_kona_i2c_enable_clock(dev);

	/* Send start command */
	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START);
	if (rc < 0) {
		dev_err(dev->device, "Start command failed rc = %d\n", rc);
		goto xfer_disable_pad;
	}

	/* Switch to high speed if applicable */
	if (dev->hs_cfg) {
		rc = bcm_kona_i2c_switch_to_hs(dev);
		if (rc < 0)
			goto xfer_send_stop;
	}

	/* Loop through all messages */
	for (i = 0; i < num; i++) {
		pmsg = &msgs[i];

		/* Send restart for subsequent messages */
		if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) {
			rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
			if (rc < 0) {
				dev_err(dev->device,
					"restart cmd failed rc = %d\n", rc);
				goto xfer_send_stop;
			}
		}

		/* Send slave address */
		if (!(pmsg->flags & I2C_M_NOSTART)) {
			rc = bcm_kona_i2c_do_addr(dev, pmsg);
			if (rc < 0) {
				dev_err(dev->device,
					"NAK from addr %2.2x msg#%d rc = %d\n",
					pmsg->addr, i, rc);
				goto xfer_send_stop;
			}
		}

		/* Perform data transfer */
		if (pmsg->flags & I2C_M_RD) {
			rc = bcm_kona_i2c_read_fifo(dev, pmsg);
			if (rc < 0) {
				dev_err(dev->device, "read failure\n");
				goto xfer_send_stop;
			}
		} else {
			rc = bcm_kona_i2c_write_fifo(dev, pmsg);
			if (rc < 0) {
				dev_err(dev->device, "write failure");
				goto xfer_send_stop;
			}
		}
	}

	rc = num;

xfer_send_stop:
	/* Send a STOP command */
	bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP);

	/* Return from high speed if applicable */
	if (dev->hs_cfg) {
		int hs_rc = bcm_kona_i2c_switch_to_std(dev);

		if (hs_rc)
			rc = hs_rc;
	}

xfer_disable_pad:
	/* Disable pad output */
	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);

	/* Stop internal clock */
	bcm_kona_i2c_disable_clock(dev);

	clk_disable_unprepare(dev->external_clk);

	return rc;
}

static uint32_t bcm_kona_i2c_functionality(struct i2c_adapter *adap)
{
	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
	    I2C_FUNC_NOSTART;
}

static const struct i2c_algorithm bcm_algo = {
	.master_xfer = bcm_kona_i2c_xfer,
	.functionality = bcm_kona_i2c_functionality,
};

static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev)
{
	unsigned int bus_speed;
	int ret = of_property_read_u32(dev->device->of_node, "clock-frequency",
				       &bus_speed);
	if (ret < 0) {
		dev_err(dev->device, "missing clock-frequency property\n");
		return -ENODEV;
	}

	switch (bus_speed) {
	case I2C_MAX_STANDARD_MODE_FREQ:
		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
		break;
	case I2C_MAX_FAST_MODE_FREQ:
		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
		break;
	case I2C_MAX_FAST_MODE_PLUS_FREQ:
		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
		break;
	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
		/* Send mastercode at 100k */
		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
		dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];
		break;
	default:
		pr_err("%d hz bus speed not supported\n", bus_speed);
		pr_err("Valid speeds are 100khz, 400khz, 1mhz, and 3.4mhz\n");
		return -EINVAL;
	}

	return 0;
}

static int bcm_kona_i2c_probe(struct platform_device *pdev)
{
	int rc = 0;
	struct bcm_kona_i2c_dev *dev;
	struct i2c_adapter *adap;
	struct resource *iomem;

	/* Allocate memory for private data structure */
	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
	if (!dev)
		return -ENOMEM;

	platform_set_drvdata(pdev, dev);
	dev->device = &pdev->dev;
	init_completion(&dev->done);

	/* Map hardware registers */
	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	dev->base = devm_ioremap_resource(dev->device, iomem);
	if (IS_ERR(dev->base))
		return -ENOMEM;

	/* Get and enable external clock */
	dev->external_clk = devm_clk_get(dev->device, NULL);
	if (IS_ERR(dev->external_clk)) {
		dev_err(dev->device, "couldn't get clock\n");
		return -ENODEV;
	}

	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
	if (rc) {
		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
			__func__, rc);
		return rc;
	}

	rc = clk_prepare_enable(dev->external_clk);
	if (rc) {
		dev_err(dev->device, "couldn't enable clock\n");
		return rc;
	}

	/* Parse bus speed */
	rc = bcm_kona_i2c_assign_bus_speed(dev);
	if (rc)
		goto probe_disable_clk;

	/* Enable internal clocks */
	bcm_kona_i2c_enable_clock(dev);

	/* Configure internal dividers */
	bcm_kona_i2c_config_timing(dev);

	/* Disable timeout */
	writel(0, dev->base + TOUT_OFFSET);

	/* Enable autosense */
	bcm_kona_i2c_enable_autosense(dev);

	/* Enable TX FIFO */
	writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
	       dev->base + TXFCR_OFFSET);

	/* Mask all interrupts */
	writel(0, dev->base + IER_OFFSET);

	/* Clear all pending interrupts */
	writel(ISR_CMDBUSY_MASK |
	       ISR_READ_COMPLETE_MASK |
	       ISR_SES_DONE_MASK |
	       ISR_ERR_MASK |
	       ISR_TXFIFOEMPTY_MASK |
	       ISR_NOACK_MASK,
	       dev->base + ISR_OFFSET);

	/* Get the interrupt number */
	dev->irq = platform_get_irq(pdev, 0);
	if (dev->irq < 0) {
		dev_err(dev->device, "no irq resource\n");
		rc = -ENODEV;
		goto probe_disable_clk;
	}

	/* register the ISR handler */
	rc = devm_request_irq(&pdev->dev, dev->irq, bcm_kona_i2c_isr,
			      IRQF_SHARED, pdev->name, dev);
	if (rc) {
		dev_err(dev->device, "failed to request irq %i\n", dev->irq);
		goto probe_disable_clk;
	}

	/* Enable the controller but leave it idle */
	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);

	/* Disable pad output */
	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);

	/* Disable internal clock */
	bcm_kona_i2c_disable_clock(dev);

	/* Disable external clock */
	clk_disable_unprepare(dev->external_clk);

	/* Add the i2c adapter */
	adap = &dev->adapter;
	i2c_set_adapdata(adap, dev);
	adap->owner = THIS_MODULE;
	strlcpy(adap->name, "Broadcom I2C adapter", sizeof(adap->name));
	adap->algo = &bcm_algo;
	adap->dev.parent = &pdev->dev;
	adap->dev.of_node = pdev->dev.of_node;

	rc = i2c_add_adapter(adap);
	if (rc)
		return rc;

	dev_info(dev->device, "device registered successfully\n");

	return 0;

probe_disable_clk:
	bcm_kona_i2c_disable_clock(dev);
	clk_disable_unprepare(dev->external_clk);

	return rc;
}

static int bcm_kona_i2c_remove(struct platform_device *pdev)
{
	struct bcm_kona_i2c_dev *dev = platform_get_drvdata(pdev);

	i2c_del_adapter(&dev->adapter);

	return 0;
}

static const struct of_device_id bcm_kona_i2c_of_match[] = {
	{.compatible = "brcm,kona-i2c",},
	{},
};
MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match);

static struct platform_driver bcm_kona_i2c_driver = {
	.driver = {
		   .name = "bcm-kona-i2c",
		   .of_match_table = bcm_kona_i2c_of_match,
		   },
	.probe = bcm_kona_i2c_probe,
	.remove = bcm_kona_i2c_remove,
};
module_platform_driver(bcm_kona_i2c_driver);

MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
MODULE_DESCRIPTION("Broadcom Kona I2C Driver");
MODULE_LICENSE("GPL v2");