1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
/*
* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2018, The Linux Foundation
*/
#include <linux/iopoll.h>
#include "dsi_phy.h"
#include "dsi.xml.h"
static int dsi_phy_hw_v3_0_is_pll_on(struct msm_dsi_phy *phy)
{
void __iomem *base = phy->base;
u32 data = 0;
data = dsi_phy_read(base + REG_DSI_10nm_PHY_CMN_PLL_CNTRL);
mb(); /* make sure read happened */
return (data & BIT(0));
}
static void dsi_phy_hw_v3_0_config_lpcdrx(struct msm_dsi_phy *phy, bool enable)
{
void __iomem *lane_base = phy->lane_base;
int phy_lane_0 = 0; /* TODO: Support all lane swap configs */
/*
* LPRX and CDRX need to enabled only for physical data lane
* corresponding to the logical data lane 0
*/
if (enable)
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_LPRX_CTRL(phy_lane_0), 0x3);
else
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_LPRX_CTRL(phy_lane_0), 0);
}
static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
{
int i;
u8 tx_dctrl[] = { 0x00, 0x00, 0x00, 0x04, 0x01 };
void __iomem *lane_base = phy->lane_base;
/* Strength ctrl settings */
for (i = 0; i < 5; i++) {
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_LPTX_STR_CTRL(i),
0x55);
/*
* Disable LPRX and CDRX for all lanes. And later on, it will
* be only enabled for the physical data lane corresponding
* to the logical data lane 0
*/
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_LPRX_CTRL(i), 0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_PIN_SWAP(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_HSTX_STR_CTRL(i),
0x88);
}
dsi_phy_hw_v3_0_config_lpcdrx(phy, true);
/* other settings */
for (i = 0; i < 5; i++) {
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG0(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG1(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG2(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG3(i),
i == 4 ? 0x80 : 0x0);
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_OFFSET_TOP_CTRL(i), 0x0);
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_OFFSET_BOT_CTRL(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(i),
tx_dctrl[i]);
}
/* Toggle BIT 0 to release freeze I/0 */
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x05);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04);
}
static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
struct msm_dsi_phy_clk_request *clk_req)
{
int ret;
u32 status;
u32 const delay_us = 5;
u32 const timeout_us = 1000;
struct msm_dsi_dphy_timing *timing = &phy->timing;
void __iomem *base = phy->base;
u32 data;
DBG("");
if (msm_dsi_dphy_timing_calc_v3(timing, clk_req)) {
DRM_DEV_ERROR(&phy->pdev->dev,
"%s: D-PHY timing calculation failed\n", __func__);
return -EINVAL;
}
if (dsi_phy_hw_v3_0_is_pll_on(phy))
pr_warn("PLL turned on before configuring PHY\n");
/* wait for REFGEN READY */
ret = readl_poll_timeout_atomic(base + REG_DSI_10nm_PHY_CMN_PHY_STATUS,
status, (status & BIT(0)),
delay_us, timeout_us);
if (ret) {
pr_err("Ref gen not ready. Aborting\n");
return -EINVAL;
}
/* de-assert digital and pll power down */
data = BIT(6) | BIT(5);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, data);
/* Assert PLL core reset */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0x00);
/* turn off resync FIFO */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x00);
/* Select MS1 byte-clk */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_GLBL_CTRL, 0x10);
/* Enable LDO */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_VREG_CTRL, 0x59);
/* Configure PHY lane swap (TODO: we need to calculate this) */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CFG0, 0x21);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CFG1, 0x84);
/* DSI PHY timings */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_0,
timing->hs_halfbyte_en);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_1,
timing->clk_zero);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_2,
timing->clk_prepare);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_3,
timing->clk_trail);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_4,
timing->hs_exit);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_5,
timing->hs_zero);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_6,
timing->hs_prepare);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_7,
timing->hs_trail);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_8,
timing->hs_rqst);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_9,
timing->ta_go | (timing->ta_sure << 3));
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_10,
timing->ta_get);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_11,
0x00);
/* Remove power down from all blocks */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, 0x7f);
/* power up lanes */
data = dsi_phy_read(base + REG_DSI_10nm_PHY_CMN_CTRL_0);
/* TODO: only power up lanes that are used */
data |= 0x1F;
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, data);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CTRL0, 0x1F);
/* Select full-rate mode */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_2, 0x40);
ret = msm_dsi_pll_set_usecase(phy->pll, phy->usecase);
if (ret) {
DRM_DEV_ERROR(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
__func__, ret);
return ret;
}
/* DSI lane settings */
dsi_phy_hw_v3_0_lane_settings(phy);
DBG("DSI%d PHY enabled", phy->id);
return 0;
}
static void dsi_10nm_phy_disable(struct msm_dsi_phy *phy)
{
}
static int dsi_10nm_phy_init(struct msm_dsi_phy *phy)
{
struct platform_device *pdev = phy->pdev;
phy->lane_base = msm_ioremap(pdev, "dsi_phy_lane",
"DSI_PHY_LANE");
if (IS_ERR(phy->lane_base)) {
DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n",
__func__);
return -ENOMEM;
}
return 0;
}
const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
.type = MSM_DSI_PHY_10NM,
.src_pll_truthtable = { {false, false}, {true, false} },
.reg_cfg = {
.num = 1,
.regs = {
{"vdds", 36000, 32},
},
},
.ops = {
.enable = dsi_10nm_phy_enable,
.disable = dsi_10nm_phy_disable,
.init = dsi_10nm_phy_init,
},
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
};
const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs = {
.type = MSM_DSI_PHY_10NM,
.src_pll_truthtable = { {false, false}, {true, false} },
.reg_cfg = {
.num = 1,
.regs = {
{"vdds", 36000, 32},
},
},
.ops = {
.enable = dsi_10nm_phy_enable,
.disable = dsi_10nm_phy_disable,
.init = dsi_10nm_phy_init,
},
.io_start = { 0xc994400, 0xc996400 },
.num_dsi_phy = 2,
};
|
