summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
blob: 62c3bd4cb28d89f36d994fce9dd58292c68ec801 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge

maintainers:
  - Jagan Teki <jagan@amarulasolutions.com>

description: |
  ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.

  It has a flexible configuration of MIPI DSI signal input and
  produce RGB565, RGB666, RGB888 output format.

properties:
  compatible:
    enum:
      - chipone,icn6211

  reg:
    maxItems: 1
    description: virtual channel number of a DSI peripheral

  enable-gpios:
    description: Bridge EN pin, chip is reset when EN is low.

  vdd1-supply:
    description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.

  vdd2-supply:
    description: A 1.8V/2.5V/3.3V supply that power the PLL.

  vdd3-supply:
    description: A 1.8V/2.5V/3.3V supply that power the RGB output.

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Video port for MIPI DSI input

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Video port for MIPI DPI output (panel or connector).

    required:
      - port@0
      - port@1

required:
  - compatible
  - reg
  - enable-gpios
  - ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    dsi {
      #address-cells = <1>;
      #size-cells = <0>;

      bridge@0 {
        compatible = "chipone,icn6211";
        reg = <0>;
        enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */

        ports {
          #address-cells = <1>;
          #size-cells = <0>;

          port@0 {
            reg = <0>;

            bridge_in_dsi: endpoint {
              remote-endpoint = <&dsi_out_bridge>;
            };
          };

          port@1 {
            reg = <1>;

            bridge_out_panel: endpoint {
              remote-endpoint = <&panel_out_bridge>;
            };
          };
        };
      };
    };