/* * Copyright © 2006 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Authors: * Eric Anholt * */ #include #include #include "display/intel_display.h" #include "display/intel_gmbus.h" #include "i915_drv.h" #define _INTEL_BIOS_PRIVATE #include "intel_vbt_defs.h" /** * DOC: Video BIOS Table (VBT) * * The Video BIOS Table, or VBT, provides platform and board specific * configuration information to the driver that is not discoverable or available * through other means. The configuration is mostly related to display * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in * the PCI ROM. * * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that * contain the actual configuration information. The VBT Header, and thus the * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the * BDB Header. The data blocks are concatenated after the BDB Header. The data * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of * data. (Block 53, the MIPI Sequence Block is an exception.) * * The driver parses the VBT during load. The relevant information is stored in * driver private data for ease of use, and the actual VBT is not read after * that. */ #define SLAVE_ADDR1 0x70 #define SLAVE_ADDR2 0x72 /* Get BDB block size given a pointer to Block ID. */ static u32 _get_blocksize(const u8 *block_base) { /* The MIPI Sequence Block v3+ has a separate size field. */ if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3) return *((const u32 *)(block_base + 4)); else return *((const u16 *)(block_base + 1)); } /* Get BDB block size give a pointer to data after Block ID and Block Size. */ static u32 get_blocksize(const void *block_data) { return _get_blocksize(block_data - 3); } static const void * find_section(const void *_bdb, enum bdb_block_id section_id) { const struct bdb_header *bdb = _bdb; const u8 *base = _bdb; int index = 0; u32 total, current_size; enum bdb_block_id current_id; /* skip to first section */ index += bdb->header_size; total = bdb->bdb_size; /* walk the sections looking for section_id */ while (index + 3 < total) { current_id = *(base + index); current_size = _get_blocksize(base + index); index += 3; if (index + current_size > total) return NULL; if (current_id == section_id) return base + index; index += current_size; } return NULL; } static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, const struct lvds_dvo_timing *dvo_timing) { panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | dvo_timing->hactive_lo; panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + ((dvo_timing->hsync_pulse_width_hi << 8) | dvo_timing->hsync_pulse_width_lo); panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | dvo_timing->vactive_lo; panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + ((dvo_timing->vsync_off_hi << 4) | dvo_timing->vsync_off_lo); panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + ((dvo_timing->vsync_pulse_width_hi << 4) | dvo_timing->vsync_pulse_width_lo); panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); panel_fixed_mode->clock = dvo_timing->clock * 10; panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; if (dvo_timing->hsync_positive) panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; else panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; if (dvo_timing->vsync_positive) panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; else panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) | dvo_timing->himage_lo; panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) | dvo_timing->vimage_lo; /* Some VBTs have bogus h/vtotal values */ if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; drm_mode_set_name(panel_fixed_mode); } static const struct lvds_dvo_timing * get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data, const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs, int index) { /* * the size of fp_timing varies on the different platform. * So calculate the DVO timing relative offset in LVDS data * entry to get the DVO timing entry */ int lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; int dvo_timing_offset = lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset - lvds_lfp_data_ptrs->ptr[0].fp_timing_offset; char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index; return (struct lvds_dvo_timing *)(entry + dvo_timing_offset); } /* get lvds_fp_timing entry * this function may return NULL if the corresponding entry is invalid */ static const struct lvds_fp_timing * get_lvds_fp_timing(const struct bdb_header *bdb, const struct bdb_lvds_lfp_data *data, const struct bdb_lvds_lfp_data_ptrs *ptrs, int index) { size_t data_ofs = (const u8 *)data - (const u8 *)bdb; u16 data_size = ((const u16 *)data)[-1]; /* stored in header */ size_t ofs; if (index >= ARRAY_SIZE(ptrs->ptr)) return NULL; ofs = ptrs->ptr[index].fp_timing_offset; if (ofs < data_ofs || ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size) return NULL; return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs); } /* Try to find integrated panel data */ static void parse_lfp_panel_data(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_lvds_options *lvds_options; const struct bdb_lvds_lfp_data *lvds_lfp_data; const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; const struct lvds_dvo_timing *panel_dvo_timing; const struct lvds_fp_timing *fp_timing; struct drm_display_mode *panel_fixed_mode; int panel_type; int drrs_mode; int ret; lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); if (!lvds_options) return; dev_priv->vbt.lvds_dither = lvds_options->pixel_dither; ret = intel_opregion_get_panel_type(dev_priv); if (ret >= 0) { WARN_ON(ret > 0xf); panel_type = ret; DRM_DEBUG_KMS("Panel type: %d (OpRegion)\n", panel_type); } else { if (lvds_options->panel_type > 0xf) { DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n", lvds_options->panel_type); return; } panel_type = lvds_options->panel_type; DRM_DEBUG_KMS("Panel type: %d (VBT)\n", panel_type); } dev_priv->vbt.panel_type = panel_type; drrs_mode = (lvds_options->dps_panel_type_bits >> (panel_type * 2)) & MODE_MASK; /* * VBT has static DRRS = 0 and seamless DRRS = 2. * The below piece of code is required to adjust vbt.drrs_type * to match the enum drrs_support_type. */ switch (drrs_mode) { case 0: dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT; DRM_DEBUG_KMS("DRRS supported mode is static\n"); break; case 2: dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT; DRM_DEBUG_KMS("DRRS supported mode is seamless\n"); break; default: dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; DRM_DEBUG_KMS("DRRS not supported (VBT input)\n"); break; } lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); if (!lvds_lfp_data) return; lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS); if (!lvds_lfp_data_ptrs) return; panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, lvds_lfp_data_ptrs, panel_type); panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); if (!panel_fixed_mode) return; fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing); dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode; DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n"); drm_mode_debug_printmodeline(panel_fixed_mode); fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data, lvds_lfp_data_ptrs, panel_type); if (fp_timing) { /* check the resolution, just to be sure */ if (fp_timing->x_res == panel_fixed_mode->hdisplay && fp_timing->y_res == panel_fixed_mode->vdisplay) { dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val; DRM_DEBUG_KMS("VBT initial LVDS value %x\n", dev_priv->vbt.bios_lvds_val); } } } static void parse_lfp_backlight(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_lfp_backlight_data *backlight_data; const struct lfp_backlight_data_entry *entry; int panel_type = dev_priv->vbt.panel_type; backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT); if (!backlight_data) return; if (backlight_data->entry_size != sizeof(backlight_data->data[0])) { DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n", backlight_data->entry_size); return; } entry = &backlight_data->data[panel_type]; dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM; if (!dev_priv->vbt.backlight.present) { DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n", entry->type); return; } dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; if (bdb->version >= 191 && get_blocksize(backlight_data) >= sizeof(*backlight_data)) { const struct lfp_backlight_control_method *method; method = &backlight_data->backlight_control[panel_type]; dev_priv->vbt.backlight.type = method->type; dev_priv->vbt.backlight.controller = method->controller; } dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm; dev_priv->vbt.backlight.min_brightness = entry->min_brightness; DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, " "active %s, min brightness %u, level %u, controller %u\n", dev_priv->vbt.backlight.pwm_freq_hz, dev_priv->vbt.backlight.active_low_pwm ? "low" : "high", dev_priv->vbt.backlight.min_brightness, backlight_data->level[panel_type], dev_priv->vbt.backlight.controller); } /* Try to find sdvo panel data */ static void parse_sdvo_panel_data(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_sdvo_panel_dtds *dtds; struct drm_display_mode *panel_fixed_mode; int index; index = i915_modparams.vbt_sdvo_panel_type; if (index == -2) { DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n"); return; } if (index == -1) { const struct bdb_sdvo_lvds_options *sdvo_lvds_options; sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); if (!sdvo_lvds_options) return; index = sdvo_lvds_options->panel_type; } dtds = find_section(bdb, BDB_SDVO_PANEL_DTDS); if (!dtds) return; panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); if (!panel_fixed_mode) return; fill_detail_timing_data(panel_fixed_mode, &dtds->dtds[index]); dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode; DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n"); drm_mode_debug_printmodeline(panel_fixed_mode); } static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv, bool alternate) { switch (INTEL_GEN(dev_priv)) { case 2: return alternate ? 66667 : 48000; case 3: case 4: return alternate ? 100000 : 96000; default: return alternate ? 100000 : 120000; } } static void parse_general_features(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_general_features *general; general = find_section(bdb, BDB_GENERAL_FEATURES); if (!general) return; dev_priv->vbt.int_tv_support = general->int_tv_support; /* int_crt_support can't be trusted on earlier platforms */ if (bdb->version >= 155 && (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv))) dev_priv->vbt.int_crt_support = general->int_crt_support; dev_priv->vbt.lvds_use_ssc = general->enable_ssc; dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv, general->ssc_freq); dev_priv->vbt.display_clock_mode = general->display_clock_mode; dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted; if (bdb->version >= 181) { dev_priv->vbt.orientation = general->rotate_180 ? DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP : DRM_MODE_PANEL_ORIENTATION_NORMAL; } else { dev_priv->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; } DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n", dev_priv->vbt.int_tv_support, dev_priv->vbt.int_crt_support, dev_priv->vbt.lvds_use_ssc, dev_priv->vbt.lvds_ssc_freq, dev_priv->vbt.display_clock_mode, dev_priv->vbt.fdi_rx_polarity_inverted); } static const struct child_device_config * child_device_ptr(const struct bdb_general_definitions *defs, int i) { return (const void *) &defs->devices[i * defs->child_dev_size]; } static void parse_sdvo_device_mapping(struct drm_i915_private *dev_priv, u8 bdb_version) { struct sdvo_device_mapping *mapping; const struct child_device_config *child; int i, count = 0; /* * Only parse SDVO mappings on gens that could have SDVO. This isn't * accurate and doesn't have to be, as long as it's not too strict. */ if (!IS_GEN_RANGE(dev_priv, 3, 7)) { DRM_DEBUG_KMS("Skipping SDVO device mapping\n"); return; } for (i = 0, count = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; if (child->slave_addr != SLAVE_ADDR1 && child->slave_addr != SLAVE_ADDR2) { /* * If the slave address is neither 0x70 nor 0x72, * it is not a SDVO device. Skip it. */ continue; } if (child->dvo_port != DEVICE_PORT_DVOB && child->dvo_port != DEVICE_PORT_DVOC) { /* skip the incorrect SDVO port */ DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); continue; } DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" " %s port\n", child->slave_addr, (child->dvo_port == DEVICE_PORT_DVOB) ? "SDVOB" : "SDVOC"); mapping = &dev_priv->vbt.sdvo_mappings[child->dvo_port - 1]; if (!mapping->initialized) { mapping->dvo_port = child->dvo_port; mapping->slave_addr = child->slave_addr; mapping->dvo_wiring = child->dvo_wiring; mapping->ddc_pin = child->ddc_pin; mapping->i2c_pin = child->i2c_pin; mapping->initialized = 1; DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", mapping->dvo_port, mapping->slave_addr, mapping->dvo_wiring, mapping->ddc_pin, mapping->i2c_pin); } else { DRM_DEBUG_KMS("Maybe one SDVO port is shared by " "two SDVO device.\n"); } if (child->slave2_addr) { /* Maybe this is a SDVO device with multiple inputs */ /* And the mapping info is not added */ DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" " is a SDVO device with multiple inputs.\n"); } count++; } if (!count) { /* No SDVO device info is found */ DRM_DEBUG_KMS("No SDVO device info is found in VBT\n"); } } static void parse_driver_features(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_driver_features *driver; driver = find_section(bdb, BDB_DRIVER_FEATURES); if (!driver) return; if (INTEL_GEN(dev_priv) >= 5) { /* * Note that we consider BDB_DRIVER_FEATURE_INT_SDVO_LVDS * to mean "eDP". The VBT spec doesn't agree with that * interpretation, but real world VBTs seem to. */ if (driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS) dev_priv->vbt.int_lvds_support = 0; } else { /* * FIXME it's not clear which BDB version has the LVDS config * bits defined. Revision history in the VBT spec says: * "0.92 | Add two definitions for VBT value of LVDS Active * Config (00b and 11b values defined) | 06/13/2005" * but does not the specify the BDB version. * * So far version 134 (on i945gm) is the oldest VBT observed * in the wild with the bits correctly populated. Version * 108 (on i85x) does not have the bits correctly populated. */ if (bdb->version >= 134 && driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS && driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS) dev_priv->vbt.int_lvds_support = 0; } DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled); /* * If DRRS is not supported, drrs_type has to be set to 0. * This is because, VBT is configured in such a way that * static DRRS is 0 and DRRS not supported is represented by * driver->drrs_enabled=false */ if (!driver->drrs_enabled) dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED; dev_priv->vbt.psr.enable = driver->psr_enabled; } static void parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_edp *edp; const struct edp_power_seq *edp_pps; const struct edp_fast_link_params *edp_link_params; int panel_type = dev_priv->vbt.panel_type; edp = find_section(bdb, BDB_EDP); if (!edp) return; switch ((edp->color_depth >> (panel_type * 2)) & 3) { case EDP_18BPP: dev_priv->vbt.edp.bpp = 18; break; case EDP_24BPP: dev_priv->vbt.edp.bpp = 24; break; case EDP_30BPP: dev_priv->vbt.edp.bpp = 30; break; } /* Get the eDP sequencing and link info */ edp_pps = &edp->power_seqs[panel_type]; edp_link_params = &edp->fast_link_params[panel_type]; dev_priv->vbt.edp.pps = *edp_pps; switch (edp_link_params->rate) { case EDP_RATE_1_62: dev_priv->vbt.edp.rate = DP_LINK_BW_1_62; break; case EDP_RATE_2_7: dev_priv->vbt.edp.rate = DP_LINK_BW_2_7; break; default: DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n", edp_link_params->rate); break; } switch (edp_link_params->lanes) { case EDP_LANE_1: dev_priv->vbt.edp.lanes = 1; break; case EDP_LANE_2: dev_priv->vbt.edp.lanes = 2; break; case EDP_LANE_4: dev_priv->vbt.edp.lanes = 4; break; default: DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n", edp_link_params->lanes); break; } switch (edp_link_params->preemphasis) { case EDP_PREEMPHASIS_NONE: dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0; break; case EDP_PREEMPHASIS_3_5dB: dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1; break; case EDP_PREEMPHASIS_6dB: dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2; break; case EDP_PREEMPHASIS_9_5dB: dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3; break; default: DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n", edp_link_params->preemphasis); break; } switch (edp_link_params->vswing) { case EDP_VSWING_0_4V: dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0; break; case EDP_VSWING_0_6V: dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1; break; case EDP_VSWING_0_8V: dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2; break; case EDP_VSWING_1_2V: dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3; break; default: DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n", edp_link_params->vswing); break; } if (bdb->version >= 173) { u8 vswing; /* Don't read from VBT if module parameter has valid value*/ if (i915_modparams.edp_vswing) { dev_priv->vbt.edp.low_vswing = i915_modparams.edp_vswing == 1; } else { vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF; dev_priv->vbt.edp.low_vswing = vswing == 0; } } } static void parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_psr *psr; const struct psr_table *psr_table; int panel_type = dev_priv->vbt.panel_type; psr = find_section(bdb, BDB_PSR); if (!psr) { DRM_DEBUG_KMS("No PSR BDB found.\n"); return; } psr_table = &psr->psr_table[panel_type]; dev_priv->vbt.psr.full_link = psr_table->full_link; dev_priv->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup; /* Allowed VBT values goes from 0 to 15 */ dev_priv->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 : psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames; switch (psr_table->lines_to_wait) { case 0: dev_priv->vbt.psr.lines_to_wait = PSR_0_LINES_TO_WAIT; break; case 1: dev_priv->vbt.psr.lines_to_wait = PSR_1_LINE_TO_WAIT; break; case 2: dev_priv->vbt.psr.lines_to_wait = PSR_4_LINES_TO_WAIT; break; case 3: dev_priv->vbt.psr.lines_to_wait = PSR_8_LINES_TO_WAIT; break; default: DRM_DEBUG_KMS("VBT has unknown PSR lines to wait %u\n", psr_table->lines_to_wait); break; } /* * New psr options 0=500us, 1=100us, 2=2500us, 3=0us * Old decimal value is wake up time in multiples of 100 us. */ if (bdb->version >= 205 && (IS_GEN9_BC(dev_priv) || IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)) { switch (psr_table->tp1_wakeup_time) { case 0: dev_priv->vbt.psr.tp1_wakeup_time_us = 500; break; case 1: dev_priv->vbt.psr.tp1_wakeup_time_us = 100; break; case 3: dev_priv->vbt.psr.tp1_wakeup_time_us = 0; break; default: DRM_DEBUG_KMS("VBT tp1 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", psr_table->tp1_wakeup_time); /* fallthrough */ case 2: dev_priv->vbt.psr.tp1_wakeup_time_us = 2500; break; } switch (psr_table->tp2_tp3_wakeup_time) { case 0: dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 500; break; case 1: dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 100; break; case 3: dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 0; break; default: DRM_DEBUG_KMS("VBT tp2_tp3 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", psr_table->tp2_tp3_wakeup_time); /* fallthrough */ case 2: dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = 2500; break; } } else { dev_priv->vbt.psr.tp1_wakeup_time_us = psr_table->tp1_wakeup_time * 100; dev_priv->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100; } if (bdb->version >= 226) { u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time; wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3; switch (wakeup_time) { case 0: wakeup_time = 500; break; case 1: wakeup_time = 100; break; case 3: wakeup_time = 50; break; default: case 2: wakeup_time = 2500; break; } dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = wakeup_time; } else { /* Reusing PSR1 wakeup time for PSR2 in older VBTs */ dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us = dev_priv->vbt.psr.tp2_tp3_wakeup_time_us; } } static void parse_dsi_backlight_ports(struct drm_i915_private *dev_priv, u16 version, enum port port) { if (!dev_priv->vbt.dsi.config->dual_link || version < 197) { dev_priv->vbt.dsi.bl_ports = BIT(port); if (dev_priv->vbt.dsi.config->cabc_supported) dev_priv->vbt.dsi.cabc_ports = BIT(port); return; } switch (dev_priv->vbt.dsi.config->dl_dcs_backlight_ports) { case DL_DCS_PORT_A: dev_priv->vbt.dsi.bl_ports = BIT(PORT_A); break; case DL_DCS_PORT_C: dev_priv->vbt.dsi.bl_ports = BIT(PORT_C); break; default: case DL_DCS_PORT_A_AND_C: dev_priv->vbt.dsi.bl_ports = BIT(PORT_A) | BIT(PORT_C); break; } if (!dev_priv->vbt.dsi.config->cabc_supported) return; switch (dev_priv->vbt.dsi.config->dl_dcs_cabc_ports) { case DL_DCS_PORT_A: dev_priv->vbt.dsi.cabc_ports = BIT(PORT_A); break; case DL_DCS_PORT_C: dev_priv->vbt.dsi.cabc_ports = BIT(PORT_C); break; default: case DL_DCS_PORT_A_AND_C: dev_priv->vbt.dsi.cabc_ports = BIT(PORT_A) | BIT(PORT_C); break; } } static void parse_mipi_config(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_mipi_config *start; const struct mipi_config *config; const struct mipi_pps_data *pps; int panel_type = dev_priv->vbt.panel_type; enum port port; /* parse MIPI blocks only if LFP type is MIPI */ if (!intel_bios_is_dsi_present(dev_priv, &port)) return; /* Initialize this to undefined indicating no generic MIPI support */ dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID; /* Block #40 is already parsed and panel_fixed_mode is * stored in dev_priv->lfp_lvds_vbt_mode * resuse this when needed */ /* Parse #52 for panel index used from panel_type already * parsed */ start = find_section(bdb, BDB_MIPI_CONFIG); if (!start) { DRM_DEBUG_KMS("No MIPI config BDB found"); return; } DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n", panel_type); /* * get hold of the correct configuration block and pps data as per * the panel_type as index */ config = &start->config[panel_type]; pps = &start->pps[panel_type]; /* store as of now full data. Trim when we realise all is not needed */ dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL); if (!dev_priv->vbt.dsi.config) return; dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL); if (!dev_priv->vbt.dsi.pps) { kfree(dev_priv->vbt.dsi.config); return; } parse_dsi_backlight_ports(dev_priv, bdb->version, port); /* FIXME is the 90 vs. 270 correct? */ switch (config->rotation) { case ENABLE_ROTATION_0: /* * Most (all?) VBTs claim 0 degrees despite having * an upside down panel, thus we do not trust this. */ dev_priv->vbt.dsi.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; break; case ENABLE_ROTATION_90: dev_priv->vbt.dsi.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP; break; case ENABLE_ROTATION_180: dev_priv->vbt.dsi.orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; break; case ENABLE_ROTATION_270: dev_priv->vbt.dsi.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP; break; } /* We have mandatory mipi config blocks. Initialize as generic panel */ dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID; } /* Find the sequence block and size for the given panel. */ static const u8 * find_panel_sequence_block(const struct bdb_mipi_sequence *sequence, u16 panel_id, u32 *seq_size) { u32 total = get_blocksize(sequence); const u8 *data = &sequence->data[0]; u8 current_id; u32 current_size; int header_size = sequence->version >= 3 ? 5 : 3; int index = 0; int i; /* skip new block size */ if (sequence->version >= 3) data += 4; for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) { if (index + header_size > total) { DRM_ERROR("Invalid sequence block (header)\n"); return NULL; } current_id = *(data + index); if (sequence->version >= 3) current_size = *((const u32 *)(data + index + 1)); else current_size = *((const u16 *)(data + index + 1)); index += header_size; if (index + current_size > total) { DRM_ERROR("Invalid sequence block\n"); return NULL; } if (current_id == panel_id) { *seq_size = current_size; return data + index; } index += current_size; } DRM_ERROR("Sequence block detected but no valid configuration\n"); return NULL; } static int goto_next_sequence(const u8 *data, int index, int total) { u16 len; /* Skip Sequence Byte. */ for (index = index + 1; index < total; index += len) { u8 operation_byte = *(data + index); index++; switch (operation_byte) { case MIPI_SEQ_ELEM_END: return index; case MIPI_SEQ_ELEM_SEND_PKT: if (index + 4 > total) return 0; len = *((const u16 *)(data + index + 2)) + 4; break; case MIPI_SEQ_ELEM_DELAY: len = 4; break; case MIPI_SEQ_ELEM_GPIO: len = 2; break; case MIPI_SEQ_ELEM_I2C: if (index + 7 > total) return 0; len = *(data + index + 6) + 7; break; default: DRM_ERROR("Unknown operation byte\n"); return 0; } } return 0; } static int goto_next_sequence_v3(const u8 *data, int index, int total) { int seq_end; u16 len; u32 size_of_sequence; /* * Could skip sequence based on Size of Sequence alone, but also do some * checking on the structure. */ if (total < 5) { DRM_ERROR("Too small sequence size\n"); return 0; } /* Skip Sequence Byte. */ index++; /* * Size of Sequence. Excludes the Sequence Byte and the size itself, * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END * byte. */ size_of_sequence = *((const u32 *)(data + index)); index += 4; seq_end = index + size_of_sequence; if (seq_end > total) { DRM_ERROR("Invalid sequence size\n"); return 0; } for (; index < total; index += len) { u8 operation_byte = *(data + index); index++; if (operation_byte == MIPI_SEQ_ELEM_END) { if (index != seq_end) { DRM_ERROR("Invalid element structure\n"); return 0; } return index; } len = *(data + index); index++; /* * FIXME: Would be nice to check elements like for v1/v2 in * goto_next_sequence() above. */ switch (operation_byte) { case MIPI_SEQ_ELEM_SEND_PKT: case MIPI_SEQ_ELEM_DELAY: case MIPI_SEQ_ELEM_GPIO: case MIPI_SEQ_ELEM_I2C: case MIPI_SEQ_ELEM_SPI: case MIPI_SEQ_ELEM_PMIC: break; default: DRM_ERROR("Unknown operation byte %u\n", operation_byte); break; } } return 0; } /* * Get len of pre-fixed deassert fragment from a v1 init OTP sequence, * skip all delay + gpio operands and stop at the first DSI packet op. */ static int get_init_otp_deassert_fragment_len(struct drm_i915_private *dev_priv) { const u8 *data = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; int index, len; if (WARN_ON(!data || dev_priv->vbt.dsi.seq_version != 1)) return 0; /* index = 1 to skip sequence byte */ for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) { switch (data[index]) { case MIPI_SEQ_ELEM_SEND_PKT: return index == 1 ? 0 : index; case MIPI_SEQ_ELEM_DELAY: len = 5; /* 1 byte for operand + uint32 */ break; case MIPI_SEQ_ELEM_GPIO: len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */ break; default: return 0; } } return 0; } /* * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. * The deassert must be done before calling intel_dsi_device_ready, so for * these devices we split the init OTP sequence into a deassert sequence and * the actual init OTP part. */ static void fixup_mipi_sequences(struct drm_i915_private *dev_priv) { u8 *init_otp; int len; /* Limit this to VLV for now. */ if (!IS_VALLEYVIEW(dev_priv)) return; /* Limit this to v1 vid-mode sequences */ if (dev_priv->vbt.dsi.config->is_cmd_mode || dev_priv->vbt.dsi.seq_version != 1) return; /* Only do this if there are otp and assert seqs and no deassert seq */ if (!dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] || !dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] || dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) return; /* The deassert-sequence ends at the first DSI packet */ len = get_init_otp_deassert_fragment_len(dev_priv); if (!len) return; DRM_DEBUG_KMS("Using init OTP fragment to deassert reset\n"); /* Copy the fragment, update seq byte and terminate it */ init_otp = (u8 *)dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; dev_priv->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL); if (!dev_priv->vbt.dsi.deassert_seq) return; dev_priv->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET; dev_priv->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END; /* Use the copy for deassert */ dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] = dev_priv->vbt.dsi.deassert_seq; /* Replace the last byte of the fragment with init OTP seq byte */ init_otp[len - 1] = MIPI_SEQ_INIT_OTP; /* And make MIPI_MIPI_SEQ_INIT_OTP point to it */ dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1; } static void parse_mipi_sequence(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { int panel_type = dev_priv->vbt.panel_type; const struct bdb_mipi_sequence *sequence; const u8 *seq_data; u32 seq_size; u8 *data; int index = 0; /* Only our generic panel driver uses the sequence block. */ if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID) return; sequence = find_section(bdb, BDB_MIPI_SEQUENCE); if (!sequence) { DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n"); return; } /* Fail gracefully for forward incompatible sequence block. */ if (sequence->version >= 4) { DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n", sequence->version); return; } DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version); seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size); if (!seq_data) return; data = kmemdup(seq_data, seq_size, GFP_KERNEL); if (!data) return; /* Parse the sequences, store pointers to each sequence. */ for (;;) { u8 seq_id = *(data + index); if (seq_id == MIPI_SEQ_END) break; if (seq_id >= MIPI_SEQ_MAX) { DRM_ERROR("Unknown sequence %u\n", seq_id); goto err; } /* Log about presence of sequences we won't run. */ if (seq_id == MIPI_SEQ_TEAR_ON || seq_id == MIPI_SEQ_TEAR_OFF) DRM_DEBUG_KMS("Unsupported sequence %u\n", seq_id); dev_priv->vbt.dsi.sequence[seq_id] = data + index; if (sequence->version >= 3) index = goto_next_sequence_v3(data, index, seq_size); else index = goto_next_sequence(data, index, seq_size); if (!index) { DRM_ERROR("Invalid sequence %u\n", seq_id); goto err; } } dev_priv->vbt.dsi.data = data; dev_priv->vbt.dsi.size = seq_size; dev_priv->vbt.dsi.seq_version = sequence->version; fixup_mipi_sequences(dev_priv); DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n"); return; err: kfree(data); memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence)); } static u8 translate_iboost(u8 val) { static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */ if (val >= ARRAY_SIZE(mapping)) { DRM_DEBUG_KMS("Unsupported I_boost value found in VBT (%d), display may not work properly\n", val); return 0; } return mapping[val]; } static enum port get_port_by_ddc_pin(struct drm_i915_private *i915, u8 ddc_pin) { const struct ddi_vbt_port_info *info; enum port port; for (port = PORT_A; port < I915_MAX_PORTS; port++) { info = &i915->vbt.ddi_port_info[port]; if (info->child && ddc_pin == info->alternate_ddc_pin) return port; } return PORT_NONE; } static void sanitize_ddc_pin(struct drm_i915_private *dev_priv, enum port port) { struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; enum port p; if (!info->alternate_ddc_pin) return; p = get_port_by_ddc_pin(dev_priv, info->alternate_ddc_pin); if (p != PORT_NONE) { DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, " "disabling port %c DVI/HDMI support\n", port_name(port), info->alternate_ddc_pin, port_name(p), port_name(port)); /* * If we have multiple ports supposedly sharing the * pin, then dvi/hdmi couldn't exist on the shared * port. Otherwise they share the same ddc bin and * system couldn't communicate with them separately. * * Give child device order the priority, first come first * served. */ info->supports_dvi = false; info->supports_hdmi = false; info->alternate_ddc_pin = 0; } } static enum port get_port_by_aux_ch(struct drm_i915_private *i915, u8 aux_ch) { const struct ddi_vbt_port_info *info; enum port port; for (port = PORT_A; port < I915_MAX_PORTS; port++) { info = &i915->vbt.ddi_port_info[port]; if (info->child && aux_ch == info->alternate_aux_channel) return port; } return PORT_NONE; } static void sanitize_aux_ch(struct drm_i915_private *dev_priv, enum port port) { struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; enum port p; if (!info->alternate_aux_channel) return; p = get_port_by_aux_ch(dev_priv, info->alternate_aux_channel); if (p != PORT_NONE) { DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, " "disabling port %c DP support\n", port_name(port), info->alternate_aux_channel, port_name(p), port_name(port)); /* * If we have multiple ports supposedlt sharing the * aux channel, then DP couldn't exist on the shared * port. Otherwise they share the same aux channel * and system couldn't communicate with them separately. * * Give child device order the priority, first come first * served. */ info->supports_dp = false; info->alternate_aux_channel = 0; } } static const u8 cnp_ddc_pin_map[] = { [0] = 0, /* N/A */ [DDC_BUS_DDI_B] = GMBUS_PIN_1_BXT, [DDC_BUS_DDI_C] = GMBUS_PIN_2_BXT, [DDC_BUS_DDI_D] = GMBUS_PIN_4_CNP, /* sic */ [DDC_BUS_DDI_F] = GMBUS_PIN_3_BXT, /* sic */ }; static const u8 icp_ddc_pin_map[] = { [ICL_DDC_BUS_DDI_A] = GMBUS_PIN_1_BXT, [ICL_DDC_BUS_DDI_B] = GMBUS_PIN_2_BXT, [TGL_DDC_BUS_DDI_C] = GMBUS_PIN_3_BXT, [ICL_DDC_BUS_PORT_1] = GMBUS_PIN_9_TC1_ICP, [ICL_DDC_BUS_PORT_2] = GMBUS_PIN_10_TC2_ICP, [ICL_DDC_BUS_PORT_3] = GMBUS_PIN_11_TC3_ICP, [ICL_DDC_BUS_PORT_4] = GMBUS_PIN_12_TC4_ICP, [TGL_DDC_BUS_PORT_5] = GMBUS_PIN_13_TC5_TGP, [TGL_DDC_BUS_PORT_6] = GMBUS_PIN_14_TC6_TGP, }; static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin) { const u8 *ddc_pin_map; int n_entries; if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) { ddc_pin_map = icp_ddc_pin_map; n_entries = ARRAY_SIZE(icp_ddc_pin_map); } else if (HAS_PCH_CNP(dev_priv)) { ddc_pin_map = cnp_ddc_pin_map; n_entries = ARRAY_SIZE(cnp_ddc_pin_map); } else { /* Assuming direct map */ return vbt_pin; } if (vbt_pin < n_entries && ddc_pin_map[vbt_pin] != 0) return ddc_pin_map[vbt_pin]; DRM_DEBUG_KMS("Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n", vbt_pin); return 0; } static enum port dvo_port_to_port(u8 dvo_port) { /* * Each DDI port can have more than one value on the "DVO Port" field, * so look for all the possible values for each port. */ static const int dvo_ports[][3] = { [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1}, [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1}, [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1}, [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1}, [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE}, [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1}, }; enum port port; int i; for (port = PORT_A; port < ARRAY_SIZE(dvo_ports); port++) { for (i = 0; i < ARRAY_SIZE(dvo_ports[port]); i++) { if (dvo_ports[port][i] == -1) break; if (dvo_port == dvo_ports[port][i]) return port; } } return PORT_NONE; } static void parse_ddi_port(struct drm_i915_private *dev_priv, const struct child_device_config *child, u8 bdb_version) { struct ddi_vbt_port_info *info; bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; enum port port; port = dvo_port_to_port(child->dvo_port); if (port == PORT_NONE) return; info = &dev_priv->vbt.ddi_port_info[port]; if (info->child) { DRM_DEBUG_KMS("More than one child device for port %c in VBT, using the first.\n", port_name(port)); return; } is_dvi = child->device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; is_dp = child->device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT; is_crt = child->device_type & DEVICE_TYPE_ANALOG_OUTPUT; is_hdmi = is_dvi && (child->device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0; is_edp = is_dp && (child->device_type & DEVICE_TYPE_INTERNAL_CONNECTOR); if (port == PORT_A && is_dvi) { DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n", is_hdmi ? "/HDMI" : ""); is_dvi = false; is_hdmi = false; } info->supports_dvi = is_dvi; info->supports_hdmi = is_hdmi; info->supports_dp = is_dp; info->supports_edp = is_edp; if (bdb_version >= 195) info->supports_typec_usb = child->dp_usb_type_c; if (bdb_version >= 209) info->supports_tbt = child->tbt; DRM_DEBUG_KMS("Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d LSPCON:%d USB-Type-C:%d TBT:%d\n", port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp, HAS_LSPCON(dev_priv) && child->lspcon, info->supports_typec_usb, info->supports_tbt); if (is_edp && is_dvi) DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n", port_name(port)); if (is_crt && port != PORT_E) DRM_DEBUG_KMS("Port %c is analog\n", port_name(port)); if (is_crt && (is_dvi || is_dp)) DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n", port_name(port)); if (is_dvi && (port == PORT_A || port == PORT_E)) DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port)); if (!is_dvi && !is_dp && !is_crt) DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n", port_name(port)); if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E)) DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); if (is_dvi) { u8 ddc_pin; ddc_pin = map_ddc_pin(dev_priv, child->ddc_pin); if (intel_gmbus_is_valid_pin(dev_priv, ddc_pin)) { info->alternate_ddc_pin = ddc_pin; sanitize_ddc_pin(dev_priv, port); } else { DRM_DEBUG_KMS("Port %c has invalid DDC pin %d, " "sticking to defaults\n", port_name(port), ddc_pin); } } if (is_dp) { info->alternate_aux_channel = child->aux_channel; sanitize_aux_ch(dev_priv, port); } if (bdb_version >= 158) { /* The VBT HDMI level shift values match the table we have. */ u8 hdmi_level_shift = child->hdmi_level_shifter_value; DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n", port_name(port), hdmi_level_shift); info->hdmi_level_shift = hdmi_level_shift; } if (bdb_version >= 204) { int max_tmds_clock; switch (child->hdmi_max_data_rate) { default: MISSING_CASE(child->hdmi_max_data_rate); /* fall through */ case HDMI_MAX_DATA_RATE_PLATFORM: max_tmds_clock = 0; break; case HDMI_MAX_DATA_RATE_297: max_tmds_clock = 297000; break; case HDMI_MAX_DATA_RATE_165: max_tmds_clock = 165000; break; } if (max_tmds_clock) DRM_DEBUG_KMS("VBT HDMI max TMDS clock for port %c: %d kHz\n", port_name(port), max_tmds_clock); info->max_tmds_clock = max_tmds_clock; } /* Parse the I_boost config for SKL and above */ if (bdb_version >= 196 && child->iboost) { info->dp_boost_level = translate_iboost(child->dp_iboost_level); DRM_DEBUG_KMS("VBT (e)DP boost level for port %c: %d\n", port_name(port), info->dp_boost_level); info->hdmi_boost_level = translate_iboost(child->hdmi_iboost_level); DRM_DEBUG_KMS("VBT HDMI boost level for port %c: %d\n", port_name(port), info->hdmi_boost_level); } /* DP max link rate for CNL+ */ if (bdb_version >= 216) { switch (child->dp_max_link_rate) { default: case VBT_DP_MAX_LINK_RATE_HBR3: info->dp_max_link_rate = 810000; break; case VBT_DP_MAX_LINK_RATE_HBR2: info->dp_max_link_rate = 540000; break; case VBT_DP_MAX_LINK_RATE_HBR: info->dp_max_link_rate = 270000; break; case VBT_DP_MAX_LINK_RATE_LBR: info->dp_max_link_rate = 162000; break; } DRM_DEBUG_KMS("VBT DP max link rate for port %c: %d\n", port_name(port), info->dp_max_link_rate); } info->child = child; } static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version) { const struct child_device_config *child; int i; if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv)) return; if (bdb_version < 155) return; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; parse_ddi_port(dev_priv, child, bdb_version); } } static void parse_general_definitions(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) { const struct bdb_general_definitions *defs; const struct child_device_config *child; int i, child_device_num, count; u8 expected_size; u16 block_size; int bus_pin; defs = find_section(bdb, BDB_GENERAL_DEFINITIONS); if (!defs) { DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n"); return; } block_size = get_blocksize(defs); if (block_size < sizeof(*defs)) { DRM_DEBUG_KMS("General definitions block too small (%u)\n", block_size); return; } bus_pin = defs->crt_ddc_gmbus_pin; DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin); if (intel_gmbus_is_valid_pin(dev_priv, bus_pin)) dev_priv->vbt.crt_ddc_pin = bus_pin; if (bdb->version < 106) { expected_size = 22; } else if (bdb->version < 111) { expected_size = 27; } else if (bdb->version < 195) { expected_size = LEGACY_CHILD_DEVICE_CONFIG_SIZE; } else if (bdb->version == 195) { expected_size = 37; } else if (bdb->version <= 215) { expected_size = 38; } else if (bdb->version <= 216) { expected_size = 39; } else { expected_size = sizeof(*child); BUILD_BUG_ON(sizeof(*child) < 39); DRM_DEBUG_DRIVER("Expected child device config size for VBT version %u not known; assuming %u\n", bdb->version, expected_size); } /* Flag an error for unexpected size, but continue anyway. */ if (defs->child_dev_size != expected_size) DRM_ERROR("Unexpected child device config size %u (expected %u for VBT version %u)\n", defs->child_dev_size, expected_size, bdb->version); /* The legacy sized child device config is the minimum we need. */ if (defs->child_dev_size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) { DRM_DEBUG_KMS("Child device config size %u is too small.\n", defs->child_dev_size); return; } /* get the number of child device */ child_device_num = (block_size - sizeof(*defs)) / defs->child_dev_size; count = 0; /* get the number of child device that is present */ for (i = 0; i < child_device_num; i++) { child = child_device_ptr(defs, i); if (!child->device_type) continue; count++; } if (!count) { DRM_DEBUG_KMS("no child dev is parsed from VBT\n"); return; } dev_priv->vbt.child_dev = kcalloc(count, sizeof(*child), GFP_KERNEL); if (!dev_priv->vbt.child_dev) { DRM_DEBUG_KMS("No memory space for child device\n"); return; } dev_priv->vbt.child_dev_num = count; count = 0; for (i = 0; i < child_device_num; i++) { child = child_device_ptr(defs, i); if (!child->device_type) continue; DRM_DEBUG_KMS("Found VBT child device with type 0x%x\n", child->device_type); /* * Copy as much as we know (sizeof) and is available * (child_dev_size) of the child device. Accessing the data must * depend on VBT version. */ memcpy(dev_priv->vbt.child_dev + count, child, min_t(size_t, defs->child_dev_size, sizeof(*child))); count++; } } /* Common defaults which may be overridden by VBT. */ static void init_vbt_defaults(struct drm_i915_private *dev_priv) { enum port port; dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC; /* Default to having backlight */ dev_priv->vbt.backlight.present = true; /* LFP panel data */ dev_priv->vbt.lvds_dither = 1; /* SDVO panel data */ dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; /* general features */ dev_priv->vbt.int_tv_support = 1; dev_priv->vbt.int_crt_support = 1; /* driver features */ dev_priv->vbt.int_lvds_support = 1; /* Default to using SSC */ dev_priv->vbt.lvds_use_ssc = 1; /* * Core/SandyBridge/IvyBridge use alternative (120MHz) reference * clock for LVDS. */ dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv, !HAS_PCH_SPLIT(dev_priv)); DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq); for (port = PORT_A; port < I915_MAX_PORTS; port++) { struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; info->hdmi_level_shift = HDMI_LEVEL_SHIFT_UNKNOWN; } } /* Defaults to initialize only if there is no VBT. */ static void init_vbt_missing_defaults(struct drm_i915_private *dev_priv) { enum port port; for (port = PORT_A; port < I915_MAX_PORTS; port++) { struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; enum phy phy = intel_port_to_phy(dev_priv, port); /* * VBT has the TypeC mode (native,TBT/USB) and we don't want * to detect it. */ if (intel_phy_is_tc(dev_priv, phy)) continue; info->supports_dvi = (port != PORT_A && port != PORT_E); info->supports_hdmi = info->supports_dvi; info->supports_dp = (port != PORT_E); info->supports_edp = (port == PORT_A); } } static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt) { const void *_vbt = vbt; return _vbt + vbt->bdb_offset; } /** * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT * @buf: pointer to a buffer to validate * @size: size of the buffer * * Returns true on valid VBT. */ bool intel_bios_is_valid_vbt(const void *buf, size_t size) { const struct vbt_header *vbt = buf; const struct bdb_header *bdb; if (!vbt) return false; if (sizeof(struct vbt_header) > size) { DRM_DEBUG_DRIVER("VBT header incomplete\n"); return false; } if (memcmp(vbt->signature, "$VBT", 4)) { DRM_DEBUG_DRIVER("VBT invalid signature\n"); return false; } if (range_overflows_t(size_t, vbt->bdb_offset, sizeof(struct bdb_header), size)) { DRM_DEBUG_DRIVER("BDB header incomplete\n"); return false; } bdb = get_bdb_header(vbt); if (range_overflows_t(size_t, vbt->bdb_offset, bdb->bdb_size, size)) { DRM_DEBUG_DRIVER("BDB incomplete\n"); return false; } return vbt; } static const struct vbt_header *find_vbt(void __iomem *bios, size_t size) { size_t i; /* Scour memory looking for the VBT signature. */ for (i = 0; i + 4 < size; i++) { void *vbt; if (ioread32(bios + i) != *((const u32 *) "$VBT")) continue; /* * This is the one place where we explicitly discard the address * space (__iomem) of the BIOS/VBT. */ vbt = (void __force *) bios + i; if (intel_bios_is_valid_vbt(vbt, size - i)) return vbt; break; } return NULL; } /** * intel_bios_init - find VBT and initialize settings from the BIOS * @dev_priv: i915 device instance * * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also * initialize some defaults if the VBT is not present at all. */ void intel_bios_init(struct drm_i915_private *dev_priv) { struct pci_dev *pdev = dev_priv->drm.pdev; const struct vbt_header *vbt = dev_priv->opregion.vbt; const struct bdb_header *bdb; u8 __iomem *bios = NULL; if (!HAS_DISPLAY(dev_priv)) { DRM_DEBUG_KMS("Skipping VBT init due to disabled display.\n"); return; } init_vbt_defaults(dev_priv); /* If the OpRegion does not have VBT, look in PCI ROM. */ if (!vbt) { size_t size; bios = pci_map_rom(pdev, &size); if (!bios) goto out; vbt = find_vbt(bios, size); if (!vbt) goto out; DRM_DEBUG_KMS("Found valid VBT in PCI ROM\n"); } bdb = get_bdb_header(vbt); DRM_DEBUG_KMS("VBT signature \"%.*s\", BDB version %d\n", (int)sizeof(vbt->signature), vbt->signature, bdb->version); /* Grab useful general definitions */ parse_general_features(dev_priv, bdb); parse_general_definitions(dev_priv, bdb); parse_lfp_panel_data(dev_priv, bdb); parse_lfp_backlight(dev_priv, bdb); parse_sdvo_panel_data(dev_priv, bdb); parse_driver_features(dev_priv, bdb); parse_edp(dev_priv, bdb); parse_psr(dev_priv, bdb); parse_mipi_config(dev_priv, bdb); parse_mipi_sequence(dev_priv, bdb); /* Further processing on pre-parsed data */ parse_sdvo_device_mapping(dev_priv, bdb->version); parse_ddi_ports(dev_priv, bdb->version); out: if (!vbt) { DRM_INFO("Failed to find VBIOS tables (VBT)\n"); init_vbt_missing_defaults(dev_priv); } if (bios) pci_unmap_rom(pdev, bios); } /** * intel_bios_driver_remove - Free any resources allocated by intel_bios_init() * @dev_priv: i915 device instance */ void intel_bios_driver_remove(struct drm_i915_private *dev_priv) { kfree(dev_priv->vbt.child_dev); dev_priv->vbt.child_dev = NULL; dev_priv->vbt.child_dev_num = 0; kfree(dev_priv->vbt.sdvo_lvds_vbt_mode); dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; kfree(dev_priv->vbt.lfp_lvds_vbt_mode); dev_priv->vbt.lfp_lvds_vbt_mode = NULL; kfree(dev_priv->vbt.dsi.data); dev_priv->vbt.dsi.data = NULL; kfree(dev_priv->vbt.dsi.pps); dev_priv->vbt.dsi.pps = NULL; kfree(dev_priv->vbt.dsi.config); dev_priv->vbt.dsi.config = NULL; kfree(dev_priv->vbt.dsi.deassert_seq); dev_priv->vbt.dsi.deassert_seq = NULL; } /** * intel_bios_is_tv_present - is integrated TV present in VBT * @dev_priv: i915 device instance * * Return true if TV is present. If no child devices were parsed from VBT, * assume TV is present. */ bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv) { const struct child_device_config *child; int i; if (!dev_priv->vbt.int_tv_support) return false; if (!dev_priv->vbt.child_dev_num) return true; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; /* * If the device type is not TV, continue. */ switch (child->device_type) { case DEVICE_TYPE_INT_TV: case DEVICE_TYPE_TV: case DEVICE_TYPE_TV_SVIDEO_COMPOSITE: break; default: continue; } /* Only when the addin_offset is non-zero, it is regarded * as present. */ if (child->addin_offset) return true; } return false; } /** * intel_bios_is_lvds_present - is LVDS present in VBT * @dev_priv: i915 device instance * @i2c_pin: i2c pin for LVDS if present * * Return true if LVDS is present. If no child devices were parsed from VBT, * assume LVDS is present. */ bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin) { const struct child_device_config *child; int i; if (!dev_priv->vbt.child_dev_num) return true; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; /* If the device type is not LFP, continue. * We have to check both the new identifiers as well as the * old for compatibility with some BIOSes. */ if (child->device_type != DEVICE_TYPE_INT_LFP && child->device_type != DEVICE_TYPE_LFP) continue; if (intel_gmbus_is_valid_pin(dev_priv, child->i2c_pin)) *i2c_pin = child->i2c_pin; /* However, we cannot trust the BIOS writers to populate * the VBT correctly. Since LVDS requires additional * information from AIM blocks, a non-zero addin offset is * a good indicator that the LVDS is actually present. */ if (child->addin_offset) return true; /* But even then some BIOS writers perform some black magic * and instantiate the device without reference to any * additional data. Trust that if the VBT was written into * the OpRegion then they have validated the LVDS's existence. */ if (dev_priv->opregion.vbt) return true; } return false; } /** * intel_bios_is_port_present - is the specified digital port present * @dev_priv: i915 device instance * @port: port to check * * Return true if the device in %port is present. */ bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port) { const struct child_device_config *child; static const struct { u16 dp, hdmi; } port_mapping[] = { [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, }, }; int i; if (HAS_DDI(dev_priv)) { const struct ddi_vbt_port_info *port_info = &dev_priv->vbt.ddi_port_info[port]; return port_info->supports_dp || port_info->supports_dvi || port_info->supports_hdmi; } /* FIXME maybe deal with port A as well? */ if (WARN_ON(port == PORT_A) || port >= ARRAY_SIZE(port_mapping)) return false; if (!dev_priv->vbt.child_dev_num) return false; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; if ((child->dvo_port == port_mapping[port].dp || child->dvo_port == port_mapping[port].hdmi) && (child->device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING | DEVICE_TYPE_DISPLAYPORT_OUTPUT))) return true; } return false; } /** * intel_bios_is_port_edp - is the device in given port eDP * @dev_priv: i915 device instance * @port: port to check * * Return true if the device in %port is eDP. */ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port) { const struct child_device_config *child; static const short port_mapping[] = { [PORT_B] = DVO_PORT_DPB, [PORT_C] = DVO_PORT_DPC, [PORT_D] = DVO_PORT_DPD, [PORT_E] = DVO_PORT_DPE, [PORT_F] = DVO_PORT_DPF, }; int i; if (HAS_DDI(dev_priv)) return dev_priv->vbt.ddi_port_info[port].supports_edp; if (!dev_priv->vbt.child_dev_num) return false; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; if (child->dvo_port == port_mapping[port] && (child->device_type & DEVICE_TYPE_eDP_BITS) == (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS)) return true; } return false; } static bool child_dev_is_dp_dual_mode(const struct child_device_config *child, enum port port) { static const struct { u16 dp, hdmi; } port_mapping[] = { /* * Buggy VBTs may declare DP ports as having * HDMI type dvo_port :( So let's check both. */ [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, }, [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, }, [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, }, }; if (port == PORT_A || port >= ARRAY_SIZE(port_mapping)) return false; if ((child->device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) != (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) return false; if (child->dvo_port == port_mapping[port].dp) return true; /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */ if (child->dvo_port == port_mapping[port].hdmi && child->aux_channel != 0) return true; return false; } bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port) { const struct child_device_config *child; int i; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; if (child_dev_is_dp_dual_mode(child, port)) return true; } return false; } /** * intel_bios_is_dsi_present - is DSI present in VBT * @dev_priv: i915 device instance * @port: port for DSI if present * * Return true if DSI is present, and return the port in %port. */ bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port) { const struct child_device_config *child; u8 dvo_port; int i; for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { child = dev_priv->vbt.child_dev + i; if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT)) continue; dvo_port = child->dvo_port; if (dvo_port == DVO_PORT_MIPIA || (dvo_port == DVO_PORT_MIPIB && INTEL_GEN(dev_priv) >= 11) || (dvo_port == DVO_PORT_MIPIC && INTEL_GEN(dev_priv) < 11)) { if (port) *port = dvo_port - DVO_PORT_MIPIA; return true; } else if (dvo_port == DVO_PORT_MIPIB || dvo_port == DVO_PORT_MIPIC || dvo_port == DVO_PORT_MIPID) { DRM_DEBUG_KMS("VBT has unsupported DSI port %c\n", port_name(dvo_port - DVO_PORT_MIPIA)); } } return false; } /** * intel_bios_is_port_hpd_inverted - is HPD inverted for %port * @i915: i915 device instance * @port: port to check * * Return true if HPD should be inverted for %port. */ bool intel_bios_is_port_hpd_inverted(const struct drm_i915_private *i915, enum port port) { const struct child_device_config *child = i915->vbt.ddi_port_info[port].child; if (WARN_ON_ONCE(!IS_GEN9_LP(i915))) return false; return child && child->hpd_invert; } /** * intel_bios_is_lspcon_present - if LSPCON is attached on %port * @i915: i915 device instance * @port: port to check * * Return true if LSPCON is present on this port */ bool intel_bios_is_lspcon_present(const struct drm_i915_private *i915, enum port port) { const struct child_device_config *child = i915->vbt.ddi_port_info[port].child; return HAS_LSPCON(i915) && child && child->lspcon; } enum aux_ch intel_bios_port_aux_ch(struct drm_i915_private *dev_priv, enum port port) { const struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; enum aux_ch aux_ch; if (!info->alternate_aux_channel) { aux_ch = (enum aux_ch)port; DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n", aux_ch_name(aux_ch), port_name(port)); return aux_ch; } switch (info->alternate_aux_channel) { case DP_AUX_A: aux_ch = AUX_CH_A; break; case DP_AUX_B: aux_ch = AUX_CH_B; break; case DP_AUX_C: aux_ch = AUX_CH_C; break; case DP_AUX_D: aux_ch = AUX_CH_D; break; case DP_AUX_E: aux_ch = AUX_CH_E; break; case DP_AUX_F: aux_ch = AUX_CH_F; break; default: MISSING_CASE(info->alternate_aux_channel); aux_ch = AUX_CH_A; break; } DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n", aux_ch_name(aux_ch), port_name(port)); return aux_ch; }