From d098913a10f8ef8e6043765d7f2fa552527d9c42 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 5 Sep 2019 07:37:22 -0700 Subject: bus: ti-sysc: Fix clock handling for no-idle quirks NFSroot can fail on dra7 when cpsw is probed using ti-sysc interconnect target module driver as reported by Keerthy. Device clocks and the interconnect target module may or may not be enabled by the bootloader on init, but we currently assume the clocks and module are on from the bootloader for "ti,no-idle" and "ti,no-idle-on-init" quirks as reported by Grygorii Strashko. Let's fix the issue by always enabling clocks init, and never disable them for "ti,no-idle" quirk. For "ti,no-idle-on-init" quirk, we must decrement the usage count later on to allow PM runtime to idle the module if requested. Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision") Cc: Keerthy Cc: Vignesh Raghavendra Reported-by: Keerthy Reported-by: Grygorii Strashko Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 48 +++++++++++++++++++++++++++++++++++++----------- 1 file changed, 37 insertions(+), 11 deletions(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 2db474ab4c6b..da88de487792 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1630,17 +1630,19 @@ static int sysc_init_module(struct sysc *ddata) if (error) return error; - if (manage_clocks) { - sysc_clkdm_deny_idle(ddata); + sysc_clkdm_deny_idle(ddata); - error = sysc_enable_opt_clocks(ddata); - if (error) - return error; + /* + * Always enable clocks. The bootloader may or may not have enabled + * the related clocks. + */ + error = sysc_enable_opt_clocks(ddata); + if (error) + return error; - error = sysc_enable_main_clocks(ddata); - if (error) - goto err_opt_clocks; - } + error = sysc_enable_main_clocks(ddata); + if (error) + goto err_opt_clocks; if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)) { error = sysc_rstctrl_reset_deassert(ddata, true); @@ -1658,7 +1660,7 @@ static int sysc_init_module(struct sysc *ddata) goto err_main_clocks; } - if (!ddata->legacy_mode && manage_clocks) { + if (!ddata->legacy_mode) { error = sysc_enable_module(ddata->dev); if (error) goto err_main_clocks; @@ -1675,6 +1677,7 @@ err_main_clocks: if (manage_clocks) sysc_disable_main_clocks(ddata); err_opt_clocks: + /* No re-enable of clockdomain autoidle to prevent module autoidle */ if (manage_clocks) { sysc_disable_opt_clocks(ddata); sysc_clkdm_allow_idle(ddata); @@ -2355,6 +2358,28 @@ static void ti_sysc_idle(struct work_struct *work) ddata = container_of(work, struct sysc, idle_work.work); + /* + * One time decrement of clock usage counts if left on from init. + * Note that we disable opt clocks unconditionally in this case + * as they are enabled unconditionally during init without + * considering sysc_opt_clks_needed() at that point. + */ + if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE | + SYSC_QUIRK_NO_IDLE_ON_INIT)) { + sysc_clkdm_deny_idle(ddata); + sysc_disable_main_clocks(ddata); + sysc_disable_opt_clocks(ddata); + sysc_clkdm_allow_idle(ddata); + } + + /* Keep permanent PM runtime usage count for SYSC_QUIRK_NO_IDLE */ + if (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE) + return; + + /* + * Decrement PM runtime usage count for SYSC_QUIRK_NO_IDLE_ON_INIT + * and SYSC_QUIRK_NO_RESET_ON_INIT + */ if (pm_runtime_active(ddata->dev)) pm_runtime_put_sync(ddata->dev); } @@ -2439,7 +2464,8 @@ static int sysc_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&ddata->idle_work, ti_sysc_idle); /* At least earlycon won't survive without deferred idle */ - if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE_ON_INIT | + if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE | + SYSC_QUIRK_NO_IDLE_ON_INIT | SYSC_QUIRK_NO_RESET_ON_INIT)) { schedule_delayed_work(&ddata->idle_work, 3000); } else { -- cgit v1.2.3 From 2783d0638a51e8dba6319d9f4a2b445995a4fad1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 5 Sep 2019 13:01:29 -0700 Subject: bus: ti-sysc: Fix handling of invalid clocks We can currently get "Unable to handle kernel paging request at virtual address" for invalid clocks with dts node but no driver: (__clk_get_hw) from [] (ti_sysc_find_one_clockdomain+0x18/0x34) (ti_sysc_find_one_clockdomain) from [] (ti_sysc_clkdm_init+0x34/0xdc) (ti_sysc_clkdm_init) from [] (sysc_probe+0xa50/0x10e8) (sysc_probe) from [] (platform_drv_probe+0x58/0xa8) Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating clk_get() with -ENOENT as a proper error. If the clock name is specified in device tree we must succeed with clk_get() to continue. For modules with no clock names specified in device tree we will just ignore the clocks. Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Acked-by: Roger Quadros Tested-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 4 ++-- drivers/bus/ti-sysc.c | 5 +---- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 6c6f8fce854e..d942a3357090 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -491,11 +491,11 @@ static int ti_sysc_clkdm_init(struct device *dev, struct clk *fck, struct clk *ick, struct ti_sysc_cookie *cookie) { - if (fck) + if (!IS_ERR(fck)) cookie->clkdm = ti_sysc_find_one_clockdomain(fck); if (cookie->clkdm) return 0; - if (ick) + if (!IS_ERR(ick)) cookie->clkdm = ti_sysc_find_one_clockdomain(ick); if (cookie->clkdm) return 0; diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index da88de487792..24583d82b584 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -280,9 +280,6 @@ static int sysc_get_one_clock(struct sysc *ddata, const char *name) ddata->clocks[index] = devm_clk_get(ddata->dev, name); if (IS_ERR(ddata->clocks[index])) { - if (PTR_ERR(ddata->clocks[index]) == -ENOENT) - return 0; - dev_err(ddata->dev, "clock get error for %s: %li\n", name, PTR_ERR(ddata->clocks[index])); @@ -357,7 +354,7 @@ static int sysc_get_clocks(struct sysc *ddata) continue; error = sysc_get_one_clock(ddata, name); - if (error && error != -ENOENT) + if (error) return error; } -- cgit v1.2.3 From 4957eccf979b025286b39388fd1a60cde601a10a Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 28 Aug 2019 13:33:49 -0500 Subject: ARM: omap2plus_defconfig: Fix missing video When the panel-dpi driver was removed, the simple-panels driver was never enabled, so anyone who used the panel-dpi driver lost video, and those who used it inconjunction with simple-panels would have to manually enable CONFIG_DRM_PANEL_SIMPLE. This patch makes CONFIG_DRM_PANEL_SIMPLE a module in the same way the deprecated panel-dpi was. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c7bf9c493646..64eb896907bf 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -363,6 +363,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m CONFIG_DRM_TILCDC=m +CONFIG_DRM_PANEL_SIMPLE=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y -- cgit v1.2.3 From f9f5518a38684e031d913f40482721ff553f5ba2 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 28 Aug 2019 13:33:50 -0500 Subject: ARM: dts: logicpd-torpedo-baseboard: Fix missing video A previous commit removed the panel-dpi driver, which made the Torpedo video stop working because it relied on the dpi driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the Torpedo dev kits to use a similar panel and remove the manual timing requirements. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 37 ++++-------------------- 1 file changed, 6 insertions(+), 31 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 642e809e757a..449cc7616da6 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -108,7 +108,6 @@ &dss { status = "ok"; vdds_dsi-supply = <&vpll2>; - vdda_video-supply = <&video_reg>; pinctrl-names = "default"; pinctrl-0 = <&dss_dpi_pins1>; port { @@ -124,44 +123,20 @@ display0 = &lcd0; }; - video_reg: video_reg { - pinctrl-names = "default"; - pinctrl-0 = <&panel_pwr_pins>; - compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ - }; - lcd0: display { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - /* default-on; */ pinctrl-names = "default"; - + pinctrl-0 = <&panel_pwr_pins>; + backlight = <&bl>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight { -- cgit v1.2.3 From 24cf23276a54dd2825d3e3965c1b1b453e2a113d Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 28 Aug 2019 13:33:51 -0500 Subject: ARM: dts: am3517-evm: Fix missing video A previous commit removed the panel-dpi driver, which made the video on the AM3517-evm stop working because it relied on the dpi driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the am3517-evm to use a similar panel and remove the manual timing requirements. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517-evm.dts | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index ebfe28c2f544..a1fd3e63e86e 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -124,10 +124,11 @@ }; lcd0: display@0 { - compatible = "panel-dpi"; + /* This isn't the exact LCD, but the timings meet spec */ + /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */ + compatible = "newhaven,nhd-4.3-480272ef-atxl"; label = "15"; - status = "okay"; - pinctrl-names = "default"; + backlight = <&bl>; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ vcc-supply = <&vdd_io_reg>; @@ -136,22 +137,6 @@ remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <4>; - vsync-len = <11>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; }; bl: backlight { -- cgit v1.2.3 From a932b77b4d1939ad173f18be87da409427fb705c Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 20 Aug 2019 07:17:27 -0500 Subject: ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux When the pinmux configuration was added, it was accidentally placed into the omap3_pmx_wkup node when it should have been placed into the omap3_pmx_core. This error was accidentally propagated to stable by me when I blindly requested the pull after seeing I2C issues without actually reviewing the content of the pinout. Since the bootloader previously muxed these correctly in the past, was a hidden error. This patch moves the i2c2_pins and i2c3_pins to the correct node which should eliminate i2c bus errors and timeouts due to the fact the bootloader uses the save device tree that no longer properly assigns these pins. Fixes: 5fe3c0fa0d54 ("ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV") #4.9+ Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 5563ee54c960..b56524cc7fe2 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -228,6 +228,20 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + tsc2004_pins: pinmux_tsc2004_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ @@ -249,18 +263,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - >; - }; - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - >; - }; }; &omap3_pmx_core2 { -- cgit v1.2.3 From a4c8723a162e6244fb01944fbf446750575dba59 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 6 Sep 2019 12:57:46 -0700 Subject: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() Commit d098913a10f8 ("bus: ti-sysc: Fix clock handling for no-idle quirks") fixed handling for no-idle quirk modules that are not enabled by the bootloader. But it also caused unpaired clockdomain calls that won't allow idling the system. That's because clkdm_allow_idle_nolock() and clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count. Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices. Fixes: d098913a10f8 ("bus: ti-sysc: Fix clock handling for no-idle quirks") Cc: Keerthy Cc: Vignesh Raghavendra Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 24583d82b584..364ee498feb3 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2363,7 +2363,6 @@ static void ti_sysc_idle(struct work_struct *work) */ if (ddata->cfg.quirks & (SYSC_QUIRK_NO_IDLE | SYSC_QUIRK_NO_IDLE_ON_INIT)) { - sysc_clkdm_deny_idle(ddata); sysc_disable_main_clocks(ddata); sysc_disable_opt_clocks(ddata); sysc_clkdm_allow_idle(ddata); -- cgit v1.2.3 From 11ed5cf064beac3ca345bb75fdf2429e03ac106a Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 9 Sep 2019 16:21:30 +0100 Subject: firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset Fix the copy paste typo that incorrectly assigns domain_id with the passed 'state' parameter instead of reset_state. Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0") Reported-by: Etienne Carriere Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c index 64cc81915581..ab42c21c5517 100644 --- a/drivers/firmware/arm_scmi/reset.c +++ b/drivers/firmware/arm_scmi/reset.c @@ -150,7 +150,7 @@ static int scmi_domain_reset(const struct scmi_handle *handle, u32 domain, dom = t->tx.buf; dom->domain_id = cpu_to_le32(domain); dom->flags = cpu_to_le32(flags); - dom->domain_id = cpu_to_le32(state); + dom->reset_state = cpu_to_le32(state); if (rdom->async_reset) ret = scmi_do_xfer_with_response(handle, t); -- cgit v1.2.3 From 61423712dbb86e02af4aa5de65b9041493c92cac Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 9 Sep 2019 16:21:07 +0100 Subject: reset: reset-scmi: add missing handle initialisation scmi_reset_data->handle needs to be initialised at probe, so that it can be later used to access scmi reset protocol APIs using the same. Since it was tested with a module that obtained handle elsewhere, it was missed easily. Add the missing scmi_reset_data->handle initialisation to fix the issue. Fixes: c8ae9c2da1cc ("reset: Add support for resets provided by SCMI") Acked-by: Philipp Zabel Reported-by: Etienne Carriere Signed-off-by: Sudeep Holla --- drivers/reset/reset-scmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c index c6d3c8427f14..b46df80ec6c3 100644 --- a/drivers/reset/reset-scmi.c +++ b/drivers/reset/reset-scmi.c @@ -102,6 +102,7 @@ static int scmi_reset_probe(struct scmi_device *sdev) data->rcdev.owner = THIS_MODULE; data->rcdev.of_node = np; data->rcdev.nr_resets = handle->reset_ops->num_domains_get(handle); + data->handle = handle; return devm_reset_controller_register(dev, &data->rcdev); } -- cgit v1.2.3 From b74d957f6317e60924d0d3c0c01750814c24611b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 29 Aug 2019 15:43:49 +0200 Subject: ARM: aspeed: ast2500 is ARMv6K Linux supports both the original ARMv6 level (early ARM1136) and ARMv6K (later ARM1136, ARM1176 and ARM11mpcore). ast2500 falls into the second categoy, being based on arm1176jzf-s. This is enabled by default when using ARCH_MULTI_V6, so we should not 'select CPU_V6'. Removing this will lead to more efficient use of atomic instructions. Fixes: 8c2ed9bcfbeb ("arm: Add Aspeed machine") Signed-off-by: Arnd Bergmann Reviewed-by: Joel Stanley --- arch/arm/mach-aspeed/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig index a15c3a291386..44ee6bac255e 100644 --- a/arch/arm/mach-aspeed/Kconfig +++ b/arch/arm/mach-aspeed/Kconfig @@ -26,7 +26,6 @@ config MACH_ASPEED_G4 config MACH_ASPEED_G5 bool "Aspeed SoC 5th Generation" depends on ARCH_MULTI_V6 - select CPU_V6 select PINCTRL_ASPEED_G5 help Say yes if you intend to run on an Aspeed ast2500 or similar -- cgit v1.2.3