path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-11-01Merge tag 'drm-fixes-5.4-2019-10-30' of ↵drm-fixes-2019-11-01Dave Airlie21-67/+165
git:// into drm-fixes drm-fixes-5.4-2019-10-30: amdgpu: - clang fixes - Updated golden settings - GPUVM fixes for navi - Navi sdma fix - Navi display fixes - Freesync fix - Gamma fix for DCN - DP dongle detection fix - Fix for undervolting on vega10 radeon: - enable kexec fix for PPC scheduler: - set an error on fence if hw job failed Signed-off-by: Dave Airlie <> From: Alex Deucher <> Link:
2019-11-01Merge tag 'drm-intel-fixes-2019-10-31' of ↵Dave Airlie4-7/+25
git:// into drm-fixes - Fix PCH reference clock for FDI on HSW/BDW which was causing users blank screen - Small documentation fix for TGL display PLLs Signed-off-by: Dave Airlie <> From: Rodrigo Vivi <> Link:
2019-11-01Merge tag 'drm-misc-fixes-2019-10-30-1' of ↵Dave Airlie4-9/+14
git:// into drm-fixes - three fixes for panfrost, one to silence a warning, one to fix runtime_pm and one to prevent bogus pointer dereferences - one fix for a memleak in v3d Signed-off-by: Dave Airlie <> From: Maxime Ripard <> Link:
2019-11-01Merge branch 'etnaviv/fixes' of ↵Dave Airlie3-7/+20
into drm-fixes One memory corruption fix in the MMUv2 GPU coredump code, a deadlock fix also in the coredump code and reintroduction of a helpful message, which got dropped by accident in this cycle. Signed-off-by: Dave Airlie <> From: Lucas Stach <> Link:
2019-10-30drm/amdgpu: enable -msse2 for GCC 7.1+ usersNick Desaulniers5-15/+5
A final attempt at enabling sse2 for GCC users. Orininally attempted in: commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") Reverted due to "reported instability" in: commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"") Re-added just for Clang in: commit 0f0727d971f6 ("drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") The original report didn't have enough information to know if the GPF was due to misalignment, but I suspect that it was. (The missing information was the disassembly of the function at the bottom of the trace, to see if the instruction pointer pointed to an instruction with 16B alignment memory operand requirements. The stack trace does show the stack was only 8B but not 16B aligned though, which makes this a strong possibility). Now that the stack misalignment issue has been fixed for users of GCC 7.1+, reattempt adding -msse2. This matches Clang. It will likely never be safe to enable this for pre-GCC 7.1 AND use a 16B aligned stack in these translation units. This is only a functional change for GCC 7.1+ users, and should be boot tested. Link: Signed-off-by: Nick Desaulniers <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+Nick Desaulniers5-0/+45
GCC earlier than 7.1 errors when compiling code that makes use of `double`s and sets a stack alignment outside of the range of [2^4-2^12]: $ cat foo.c double foo(double x, double y) { return x + y; } $ gcc-4.9 -mpreferred-stack-boundary=3 foo.c error: -mpreferred-stack-boundary=3 is not between 4 and 12 This is likely why the AMDGPU driver was ever compiled with a different stack alignment (and thus different ABI) than the rest of the x86 kernel. The kernel uses 8B stack alignment, while the driver was using 16B stack alignment in a few places. Since GCC 7.1+ doesn't error, fix the ABI mismatch for users of newer versions of GCC. There was discussion about whether to mark the driver broken or not for users of GCC earlier than 7.1, but since the driver currently is working, don't explicitly break the driver for them here. Relying on differing stack alignment is unspecified behavior, and brittle, and may break in the future. This patch is no functional change for GCC users earlier than 7.1. It's been compile tested on GCC 4.9 and 8.3 to check the correct flags. It should be boot tested when built with GCC 7.1+. -mincoming-stack-boundary= or -mstackrealign may help keep this code building for pre-GCC 7.1 users. The version check for GCC is broken into two conditionals, both because cc-ifversion is currently GCC specific, and it simplifies a subsequent patch. Signed-off-by: Nick Desaulniers <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu: fix stack alignment ABI mismatch for ClangNick Desaulniers5-30/+20
The x86 kernel is compiled with an 8B stack alignment via `-mpreferred-stack-boundary=3` for GCC since 3.6-rc1 via commit d9b0cde91c60 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported") or `-mstack-alignment=8` for Clang. Parts of the AMDGPU driver are compiled with 16B stack alignment. Generally, the stack alignment is part of the ABI. Linking together two different translation units with differing stack alignment is dangerous, particularly when the translation unit with the smaller stack alignment makes calls into the translation unit with the larger stack alignment. While 8B aligned stacks are sometimes also 16B aligned, they are not always. Multiple users have reported General Protection Faults (GPF) when using the AMDGPU driver compiled with Clang. Clang is placing objects in stack slots assuming the stack is 16B aligned, and selecting instructions that require 16B aligned memory operands. At runtime, syscall handlers with 8B aligned stack call into code that assumes 16B stack alignment. When the stack is a multiple of 8B but not 16B, these instructions result in a GPF. Remove the code that added compatibility between the differing compiler flags, as it will result in runtime GPFs when built with Clang. Cleanups for GCC will be sent in later patches in the series. Link: Debugged-by: Yuxuan Shui <> Reported-by: Shirish S <> Reported-by: Yuxuan Shui <> Suggested-by: Andrew Cooper <> Signed-off-by: Nick Desaulniers <> Signed-off-by: Alex Deucher <>
2019-10-30drm/radeon: Fix EEH during kexecKyle Mahlkuch1-0/+14
During kexec some adapters hit an EEH since they are not properly shut down in the radeon_pci_shutdown() function. Adding radeon_suspend_kms() fixes this issue. Enabled only on PPC because this patch causes issues on some other boards. Signed-off-by: Kyle Mahlkuch <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu/gmc10: properly set BANK_SELECT and FRAGMENT_SIZEAlex Deucher2-0/+18
These were not aligned for optimal performance for GPUVM. Acked-by: Christian König <> Reviewed-by: Tianci Yin <> Signed-off-by: Alex Deucher <> Cc:
2019-10-30drm/amdgpu/powerplay/vega10: allow undervolting in p7Pelle van Gils1-3/+1
The vega10_odn_update_soc_table() function does not allow the SCLK dependent voltage to be set for power-state 7 to a value below the default in pptable. Change the for-loop condition to allow undervolting in the highest state. Bug: Signed-off-by: Pelle van Gils <> Signed-off-by: Alex Deucher <> Cc:
2019-10-30dc.c:use kzalloc without testzhongshiqi1-0/+4
dc.c:583:null check is needed after using kzalloc function Reviewed-by: Harry Wentland <> Signed-off-by: zhongshiqi <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amd/display: setting the DIG_MODE to the correct value.Zhan liu1-0/+9
[Why] This patch is for fixing Navi14 HDMI display pink screen issue. [How] Call stream->link->link_enc->funcs->setup twice. This is setting the DIG_MODE to the correct value after having been overridden by the call to transmitter control. Signed-off-by: Zhan Liu <> Reviewed-by: Nicholas Kazlauskas <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amd/display: Passive DP->HDMI dongle detection fixMichael Strauss1-6/+18
[WHY] i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles The call is expected to fail in DVI-D case but pass in HDMI case Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D [HOW] Retry i2c_read to ensure failed result is valid Signed-off-by: Michael Strauss <> Reviewed-by: Tony Cheng <> Acked-by: Leo Li <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amd/display: add 50us buffer as WA for pstate switch in activeJun Lei1-1/+2
Signed-off-by: Jun Lei <> Reviewed-by: Aric Cyr <> Acked-by: Leo Li <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amd/display: Allow inverted gammaAidan Yang1-14/+8
[why] There's a use case for inverted gamma and it's been confirmed that negative slopes are ok. [how] Remove code for blocking non-monotonically increasing gamma Signed-off-by: Aidan Yang <> Reviewed-by: Krunoslav Kovac <> Acked-by: Leo Li <> Acked-by: Reza Amini <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amd/display: do not synchronize "drr" displaysJun Lei1-0/+6
[why] A display that supports DRR can never really be considered "synchronized" with any other display because we can dynamically enable DRR (i.e. without modeset). this will cause their relative CRTC positions to drift and lose sync. this will disrupt features such as MCLK switching that assume and depend on their permanent alignment (that can only change with modeset) [how] check for ignore_msa in stream when considered synchronizability this ignore_msa is basically actually implemented as "supports drr" Signed-off-by: Jun Lei <> Reviewed-by: Yongqiang Sun <> Acked-by: Anthony Koo <> Acked-by: Leo Li <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu: If amdgpu_ib_schedule fails return back the error.Andrey Grodzovsky1-1/+3
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule. Signed-off-by: Andrey Grodzovsky <> Reviewed-by: Christian König <> Signed-off-by: Alex Deucher <>
2019-10-30drm/sched: Set error to s_fence if HW job submission failed.Andrey Grodzovsky1-3/+16
Problem: When run_job fails and HW fence returned is NULL we still signal the s_fence to avoid hangs but the user has no way of knowing if the actual HW job was ran and finished. Fix: Allow .run_job implementations to return ERR_PTR in the fence pointer returned and then set this error for s_fence->finished fence so whoever wait on this fence can inspect the signaled fence for an error. Signed-off-by: Andrey Grodzovsky <> Reviewed-by: Christian König <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu/gfx10: update gfx golden settings for navi12Tianci.Yin1-1/+1
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: Feifei Xu <> Signed-off-by: Tianci.Yin <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin1-1/+1
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: Feifei Xu <> Signed-off-by: Tianci.Yin <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin1-1/+1
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: Feifei Xu <> Signed-off-by: Tianci.Yin <> Signed-off-by: Alex Deucher <> Cc:
2019-10-30drm/amd/display: Change Navi14's DWB flag to 1Zhan liu1-1/+1
[Why] DWB (Display Writeback) flag needs to be enabled as 1, or system will throw out a few warnings when creating dcn20 resource pool. Also, Navi14's dwb setting needs to match Navi10's, which has already been set to 1. [How] Change value of num_dwb from 0 to 1. Signed-off-by: Zhan Liu <> Reviewed-by: Nicholas Kazlauskas <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu/sdma5: do not execute 0-sized IBs (v2)Pierre-Eric Pelloux-Prayer1-0/+1
This seems to help with v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw Signed-off-by: Pierre-Eric Pelloux-Prayer <> Reviewed-by: Christian König <> Signed-off-by: Alex Deucher <>
2019-10-30drm/amdgpu: Fix SDMA hang when performing VKexample testchen gong1-0/+1
VKexample test hang during Occlusion/SDMA/Varia runs. Clear XNACK_WATERMK in reg SDMA0_UTCL1_WATERMK to fix this issue. Signed-off-by: chen gong <> Reviewed-by: Aaron Liu <> Signed-off-by: Alex Deucher <> Cc:
2019-10-29drm/i915: Fix PCH reference clock for FDI on HSW/BDWVille Syrjälä3-5/+23
The change to skip the PCH reference initialization during fastboot did end up breaking FDI. To fix that let's try to do the PCH reference init whenever we're disabling a DPLL that was using said reference previously. Cc: Tested-by: Andrija <> Bugzilla: Fixes: b16c7ed95caf ("drm/i915: Do not touch the PCH SSC reference if a PLL is using it") Signed-off-by: Ville Syrjälä <> Link: Reviewed-by: Imre Deak <> (cherry picked from commit dd5279c71405533d4ddbb9453effc60f0f5bf211) Signed-off-by: Rodrigo Vivi <>
2019-10-29drm/i915/tgl: Fix doc not corresponding to codeAnna Karas1-2/+2
Replace PLLs names used in documentation to that used in the code. Cc: Vandita Kulkarni <> Fixes: 68ff39c3f8c0 ("drm/i915/tgl: Add new pll ids") Signed-off-by: Anna Karas <> Reviewed-by: Vandita Kulkarni <> Signed-off-by: Chris Wilson <> Link: (cherry picked from commit d328bd4f905834c7d87a49962ebc96e397aab7b9) Signed-off-by: Rodrigo Vivi <>
2019-10-29drm/panfrost: Don't dereference bogus MMU pointersRobin Murphy1-3/+3
It seems that killing an application while faults are occurring (particularly with a GPU in FPGA at a whopping 40MHz) can lead to handling a lingering page fault after all the address space contexts have already been freed. In this situation, the LRU list is empty so addr_to_drm_mm_node() ends up dereferencing the list head as if it were a struct panfrost_mmu entry; this leaves "mmu->as" actually pointing at the pfdev->alloc_mask bitmap, which is also empty, and given that the fault has a high likelihood of being in AS0, hilarity ensues. Sadly, the cleanest solution seems to involve another goto. Oh well, at least it's robust... Fixes: 65e51e30d862 ("drm/panfrost: Prevent race when handling page fault") Signed-off-by: Robin Murphy <> Signed-off-by: Rob Herring <> Link:
2019-10-29drm/panfrost: fix -Wmissing-prototypes warningsYi Wang2-4/+6
We get these warnings when build kernel W=1: drivers/gpu/drm/panfrost/panfrost_perfcnt.c:35:6: warning: no previous prototype for ‘panfrost_perfcnt_clean_cache_done’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_perfcnt.c:40:6: warning: no previous prototype for ‘panfrost_perfcnt_sample_done’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_perfcnt.c:190:5: warning: no previous prototype for ‘panfrost_ioctl_perfcnt_enable’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_perfcnt.c:218:5: warning: no previous prototype for ‘panfrost_ioctl_perfcnt_dump’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_perfcnt.c:250:6: warning: no previous prototype for ‘panfrost_perfcnt_close’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_perfcnt.c:264:5: warning: no previous prototype for ‘panfrost_perfcnt_init’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_perfcnt.c:320:6: warning: no previous prototype for ‘panfrost_perfcnt_fini’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_mmu.c:227:6: warning: no previous prototype for ‘panfrost_mmu_flush_range’ [-Wmissing-prototypes] drivers/gpu/drm/panfrost/panfrost_mmu.c:435:5: warning: no previous prototype for ‘panfrost_mmu_map_fault_addr’ [-Wmissing-prototypes] For file panfrost_mmu.c, make functions static to fix this. For file panfrost_perfcnt.c, include header file can fix this. Signed-off-by: Yi Wang <> Reviewed-by: Steven Price <> Cc: [robh: fixup function parameter alignment] Signed-off-by: Rob Herring <> Link:
2019-10-29drm/etnaviv: fix dumping of iommuv2Christian Gmeiner1-2/+4
etnaviv_iommuv2_dump_size(..) returns the number of PTE * SZ_4K but etnaviv_iommuv2_dump(..) increments buf pointer even if there is no PTE. This results in a bad buf pointer which gets used for memcpy(..), when copying the MMU state in the coredump buffer. Fixes: afb7b3b1deb4 ("drm/etnaviv: implement IOMMUv2 translation") Cc: Signed-off-by: Christian Gmeiner <> Signed-off-by: Lucas Stach <>
2019-10-29drm/etnaviv: reinstate MMUv1 command buffer window checkLucas Stach1-3/+14
The switch to per-process address spaces erroneously dropped the check which validated that the command buffer is mapped through the linear apperture as required by the hardware. This turned a system misconfiguration with a helpful error message into a very hard to debug issue. Reinstate the check at the appropriate location. Fixes: 17e4660ae3d7 (drm/etnaviv: implement per-process address spaces on MMUv2) Signed-off-by: Lucas Stach <> Reviewed-by: Guido Günther <>
2019-10-29drm/etnaviv: fix deadlock in GPU coredumpLucas Stach1-2/+2
The GPU coredump function violates the locking order by holding the MMU context lock while trying to acquire the etnaviv_gem_object lock. This results in a possible ABBA deadlock with other codepaths which follow the established locking order. Fortunately this is easy to fix by dropping the MMU context lock earlier, as the BO dumping doesn't need the MMU context to be stable. The only thing the BO dumping cares about are the BO mappings, which are stable across the lifetime of the job. Fixes: 27b67278e007 (drm/etnaviv: rework MMU handling) [ Not really the first bad commit, but the one where this fix applies cleanly. Stable kernels need a manual backport. ] Reported-by: Christian Gmeiner <> Signed-off-by: Lucas Stach <> Tested-by: Christian Gmeiner <>
2019-10-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-5/+20
git:// Pull irq fixes from Thomas Gleixner: "Two fixes for interrupt controller drivers: - Skip IRQ_M_EXT entries in the device tree when initializing the RISCV PLIC controller to avoid a double init attempt. - Use the correct ITS list when issuing the VMOVP synchronization command so the operation works only on the ITS instances which are associated to a VM" * 'irq-urgent-for-linus' of git:// irqchip/sifive-plic: Skip contexts except supervisor in plic_init() irqchip/gic-v3-its: Use the exact ITSList for VMOVP
2019-10-26Merge tag 'tty-5.4-rc5' of ↵Linus Torvalds1-4/+4
git:// Pull tty/serial driver fix from Greg KH: "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a reported issue. It has been in linux-next for a while with no problems" * tag 'tty-5.4-rc5' of git:// 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV
2019-10-26Merge tag 'staging-5.4-rc5' of ↵Linus Torvalds1-4/+2
git:// Pull staging driver fix from Greg KH: "Here is a single staging driver fix, for the wlan-ng driver, that resolves a reported issue. It is been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc5' of git:// staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS
2019-10-26Merge tag 'char-misc-5.4-rc5' of ↵Linus Torvalds2-9/+4
git:// Pull binder fix from Greg KH: "This is a single binder fix to resolve a reported issue by Jann. It's been in linux-next for a while with no reported issues" * tag 'char-misc-5.4-rc5' of git:// binder: Don't modify VMA bounds in ->mmap handler
2019-10-26Merge tag 'usb-5.4-rc5' of ↵Linus Torvalds7-44/+47
git:// Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.4-rc5. More "fun" with some of the misc USB drivers as found by syzbot, and there are a number of other small bugfixes in here for reported issues. All have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc5' of git:// usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role() USB: ldusb: fix read info leaks USB: serial: ti_usb_3410_5052: clean up serial data access USB: serial: ti_usb_3410_5052: fix port-close races USB: usblp: fix use-after-free on disconnect usb: udc: lpc32xx: fix bad bit shift operation usb: cdns3: Fix dequeue implementation. USB: legousbtower: fix a signedness bug in tower_probe() USB: legousbtower: fix memleak on disconnect USB: ldusb: fix memleak on disconnect
2019-10-26Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds3-29/+48
git:// Pull i2c fixes from Wolfram Sang: "A few driver fixes for the I2C subsystem" * 'i2c/for-current-fixed' of git:// i2c: stm32f7: remove warning when compiling with W=1 i2c: stm32f7: fix a race in slave mode with arbitration loss irq i2c: stm32f7: fix first byte to send in slave mode i2c: mt65xx: fix NULL ptr dereference i2c: aspeed: fix master pending state handling
2019-10-26Merge tag 'for-linus-2019-10-26' of git:// Torvalds2-31/+48
Pull block and io_uring fixes from Jens Axboe: "A bit bigger than usual at this point in time, mostly due to some good bug hunting work by Pavel that resulted in three io_uring fixes from him and two from me. Anyway, this pull request contains: - Revert of the submit-and-wait optimization for io_uring, it can't always be done safely. It depends on commands always making progress on their own, which isn't necessarily the case outside of strict file IO. (me) - Series of two patches from me and three from Pavel, fixing issues with shared data and sequencing for io_uring. - Lastly, two timeout sequence fixes for io_uring (zhangyi) - Two nbd patches fixing races (Josef) - libahci regulator_get_optional() fix (Mark)" * tag 'for-linus-2019-10-26' of git:// nbd: verify socket is supported during setup ata: libahci_platform: Fix regulator_get_optional() misuse nbd: handle racing with error'ed out commands nbd: protect cmd->status with cmd->lock io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD io_uring: used cached copies of sq->dropped and cq->overflow io_uring: Fix race for sqes with userspace io_uring: Fix broken links with offloading io_uring: Fix corrupted user_data io_uring: correct timeout req sequence when inserting a new entry io_uring : correct timeout req sequence when waiting timeout io_uring: revert "io_uring: optimize submit_and_wait API"
2019-10-26Merge tag 's390-5.4-5' of ↵Linus Torvalds1-2/+1
git:// Pull s390 fixes from Vasily Gorbik: - Add R_390_GLOB_DAT relocation type support. This fixes boot problem on linux-next. - Fix memory leak in zcrypt * tag 's390-5.4-5' of git:// s390/kaslr: add support for R_390_GLOB_DAT relocation type s390/zcrypt: fix memleak at release
2019-10-26Merge tag 'dma-mapping-5.4-2' of git:// Torvalds1-1/+9
Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in the intel-iommu get_required_mask conversion (Arvind Sankar)" * tag 'dma-mapping-5.4-2' of git:// iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
2019-10-25Merge tag 'scsi-fixes' of ↵Linus Torvalds10-36/+36
git:// Pull SCSI fixes from James Bottomley: "Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch, 53c710[x2], target) and one core change that tries to close a race between sysfs delete and module removal" * tag 'scsi-fixes' of git:// scsi: lpfc: remove left-over BUILD_NVME defines scsi: core: try to get module before removing device scsi: hpsa: add missing hunks in reset-patch scsi: target: core: Do not overwrite CDB byte 1 scsi: ch: Make it possible to open a ch device multiple times again scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE scsi: sni_53c710: fix compilation error scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions scsi: qla2xxx: fix a potential NULL pointer dereference
2019-10-25Merge branch 'for-linus' of ↵Linus Torvalds1-2/+4
git:// Pull input fix from Dmitry Torokhov: "A fix for st1232 driver to properly report coordinates for 2nd and subsequent fingers when more than one is on the surface" * 'for-linus' of git:// Input: st1232 - fix reporting multitouch coordinates
2019-10-25nbd: verify socket is supported during setupMike Christie1-2/+21
nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <> Signed-off-by: Mike Christie <> Signed-off-by: Jens Axboe <>
2019-10-25ata: libahci_platform: Fix regulator_get_optional() misuseMark Brown1-24/+14
This driver is using regulator_get_optional() to handle all the supplies that it handles, and only ever enables and disables all supplies en masse without ever doing any other configuration of the device to handle missing power. These are clear signs that the API is being misused - it should only be used for supplies that may be physically absent from the system and in these cases the hardware usually needs different configuration if the supply is missing. Instead use normal regualtor_get(), if the supply is not described in DT then the framework will substitute a dummy regulator in so no special handling is needed by the consumer driver. In the case of the PHY regulator the handling in the driver is a hack to deal with integrated PHYs; the supplies are only optional in the sense that that there's some confusion in the code about where they're bound to. From a code point of view they function exactly as normal supplies so can be treated as such. It'd probably be better to model this by instantiating a PHY object for integrated PHYs. Reviewed-by: Hans de Goede <> Signed-off-by: Mark Brown <> Signed-off-by: Jens Axboe <>
2019-10-25nbd: handle racing with error'ed out commandsJosef Bacik1-0/+6
We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <> Signed-off-by: Josef Bacik <> Signed-off-by: Jens Axboe <>
2019-10-25nbd: protect cmd->status with cmd->lockJosef Bacik1-5/+7
We already do this for the most part, except in timeout and clear_req. For the timeout case we take the lock after we grab a ref on the config, but that isn't really necessary because we're safe to touch the cmd at this point, so just move the order around. For the clear_req cause this is initiated by the user, so again is safe. Reviewed-by: Mike Christie <> Signed-off-by: Josef Bacik <> Signed-off-by: Jens Axboe <>
2019-10-25Merge tag 'armsoc-fixes' of ↵Linus Torvalds2-5/+15
git:// Pull ARM SoC fixes from Olof Johansson: "A slightly larger set of fixes have accrued in the last two weeks. Mostly a collection of the usual smaller fixes: - Marvell Armada: USB phy setup issues on Turris Mox - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some maintainer updates. - OMAP: Fixlets for display config, interrupt settings for wifi, some clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog regression fix. - i.MX: A few fixes around PM/settings, some devicetree fixlets and catching up with config option changes in DRM - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display panel settings ... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner (phy regulators, PMU removal on A64, etc)" * tag 'armsoc-fixes' of git:// (42 commits) ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 MAINTAINERS: Update the Spreadtrum SoC maintainer MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name mailmap: Add Simon Arlott (replacement for expired email address) arm64: dts: rockchip: Fix override mode for rk3399-kevin panel ...
2019-10-25Merge tag 'drm-fixes-2019-10-25' of git:// Torvalds10-49/+96
Pull drm fixes from Dave Airlie: "Quiet week this week, which I suspect means some people just didn't get around to sending me fixes pulls in time. This has 2 komeda and a bunch of amdgpu fixes in it: komeda: - typo fixes - flushing pipes fix amdgpu: - Fix suspend/resume issue related to multi-media engines - Fix memory leak in user ptr code related to hmm conversion - Fix possible VM faults when allocating page table memory - Fix error handling in bo list ioctl" * tag 'drm-fixes-2019-10-25' of git:// drm/komeda: Fix typos in komeda_splitter_validate drm/komeda: Don't flush inactive pipes drm/amdgpu/vce: fix allocation size in enc ring test drm/amdgpu: fix error handling in amdgpu_bo_list_create drm/amdgpu: fix potential VM faults drm/amdgpu: user pages array memory leak fix drm/amdgpu/vcn: fix allocation size in enc ring test drm/amdgpu/uvd7: fix allocation size in enc ring test (v2) drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)
2019-10-25Merge tag 'mmc-v5.4-rc4' of ↵Linus Torvalds3-5/+7
git:// Pull MMC fixes from Ulf Hansson: "MMC host fixes: - mxs: Fix flags passed to dmaengine_prep_slave_sg - cqhci: Add a missing memory barrier - sdhci-omap: Fix tuning procedure for temperatures < -20C" * tag 'mmc-v5.4-rc4' of git:// mmc: mxs: fix flags passed to dmaengine_prep_slave_sg mmc: cqhci: Commit descriptors before setting the doorbell mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C
2019-10-25Merge tag 'irqchip-fixes-5.4-2' of ↵Thomas Gleixner2-5/+20
git:// into irq/urgent Pull the second lot of irqchip updates for 5.4 from Marc Zyngier: - Sifive PLIC: force driver to skip non-relevant contexts - GICv4: Don't send VMOVP commands to ITSs that don't have this vPE mapped