summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-01-29net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profilesYang Wei1-2/+2
The skb should be freed by dev_consume_skb_any() in b44_start_xmit() when bounce_skb is used. The skb is be replaced by bounce_skb, so the original skb should be consumed(not drop). dev_consume_skb_irq() should be called in b44_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29net: caif: call dev_consume_skb_any when skb xmit doneYang Wei1-4/+1
The skb shouled be consumed when xmit done, it makes drop profiles (dropwatch, perf) more friendly. dev_kfree_skb_irq()/kfree_skb() shouled be replaced by dev_consume_skb_any(), it makes code cleaner. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in cp_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29net: macb: Apply RXUBR workaround only to versions with errataHarini Katakam2-11/+20
The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29drm/amd/powerplay: Fix missing break in switchGustavo A. R. Silva1-0/+1
Add missing break statement in order to prevent the code from falling through to the default case. The resoning for this is that pclk_vol_table is an automatic variable. So, it makes no sense to update it just before falling through to the default case and return -EINVAL. This bug was found thanks to the ongoing efforts to enabling -Wimplicit-fallthrough. Fixes: cd70f3d6e3fa ("drm/amd/powerplay: PP/DAL interface changes for dynamic clock switch") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-29drm/radeon: check if device is root before getting pci speed capsAlex Deucher2-4/+6
Check if the device is root rather before attempting to see what speeds the pcie port supports. Fixes a crash with pci passthrough in a VM. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-29drm/amdgpu: Add missing power attribute to APU checkAlex Deucher1-1/+2
Add missing power_average to visible check for power attributes for APUs. Was missed before. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-29drm/vmwgfx: unwind spaghetti code in vmw_dma_select_modeChristoph Hellwig1-19/+6
Just use a simple if/else chain to select the DMA mode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-01-29drm/vmwgfx: fix the check when to use dma_alloc_coherentChristoph Hellwig1-7/+4
Since Linux 4.21 we merged the swiotlb ops into the DMA direct ops, so they would always have a the sync_single methods. But late in the cicle we also removed the direct ops entirely, so we'd see NULL DMA ops. Switch vmw_dma_select_mode to only detect swiotlb presence using swiotlb_nr_tbl() instead. Fixes: 55897af630 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Fixes: 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-01-29drm/vmwgfx: remove CONFIG_INTEL_IOMMU ifdefs v2Christoph Hellwig1-17/+4
intel_iommu_enabled is defined as always false for !CONFIG_INTEL_IOMMU, so remove the ifdefs around it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-01-29drm/vmwgfx: remove CONFIG_X86 ifdefsChristoph Hellwig1-6/+0
The driver depends on CONFIG_X86 so these are dead code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-01-29platform/x86: Fix unmet dependency warning for SAMSUNG_Q10Sinan Kaya1-0/+1
Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix: WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-29platform/x86: Fix unmet dependency warning for ACPI_CMPCSinan Kaya1-0/+1
Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n) Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-29mfd: Fix unmet dependency warning for MFD_TPS68470Sinan Kaya1-1/+1
After commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y]) Selected by [y]: - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y MFD_TPS68470 is an ACPI only device and selects I2C_DESIGNWARE_PLATFORM. I2C_DESIGNWARE_PLATFORM does not have any configuration today for ACPI support without CONFIG_PCI set. For sake of a quick fix this introduces a new mandatory dependency to the driver which may survive without it. Otherwise we need to revisit the driver architecture to address this properly. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-28net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in cpmac_end_xmit() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in bmac_txdma_intr() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irqYang Wei1-1/+1
dev_consume_skb_irq() should be called in amd8111e_tx() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irqYang Wei1-1/+1
dev_consume_skb_irq() should be called in ace_tx_int() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28vhost: fix OOB in get_rx_bufs()Jason Wang5-7/+11
After batched used ring updating was introduced in commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"). We tend to batch heads in vq->heads for more than one packet. But the quota passed to get_rx_bufs() was not correctly limited, which can result a OOB write in vq->heads. headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx, vhost_len, &in, vq_log, &log, likely(mergeable) ? UIO_MAXIOV : 1); UIO_MAXIOV was still used which is wrong since we could have batched used in vq->heads, this will cause OOB if the next buffer needs more than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've batched 64 (VHOST_NET_BATCH) heads: Acked-by: Stefan Hajnoczi <stefanha@redhat.com> ============================================================================= BUG kmalloc-8k (Tainted: G B ): Redzone overwritten ----------------------------------------------------------------------------- INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674 kmem_cache_alloc_trace+0xbb/0x140 alloc_pd+0x22/0x60 gen8_ppgtt_create+0x11d/0x5f0 i915_ppgtt_create+0x16/0x80 i915_gem_create_context+0x248/0x390 i915_gem_context_create_ioctl+0x4b/0xe0 drm_ioctl_kernel+0xa5/0xf0 drm_ioctl+0x2ed/0x3a0 do_vfs_ioctl+0x9f/0x620 ksys_ioctl+0x6b/0x80 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201 INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for vhost-net. This is done through set the limitation through vhost_dev_init(), then set_owner can allocate the number of iov in a per device manner. This fixes CVE-2018-16880. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29scsi: 53c700: pass correct "dev" to dma_alloc_attrs()Dan Carpenter1-1/+1
The "hostdata->dev" pointer is NULL here. We set "hostdata->dev = dev;" later in the function and we also use "hostdata->dev" when we call dma_free_attrs() in NCR_700_release(). This bug predates git version control. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: bnx2fc: Fix error handling in probe()Dan Carpenter1-2/+2
There are two issues here. First if cmgr->hba is not set early enough then it leads to a NULL dereference. Second if we don't completely initialize cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers. Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: scsi_debug: fix write_same with virtual_gb problemDouglas Gilbert1-20/+21
The WRITE SAME(10) and (16) implementations didn't take account of the buffer wrap required when the virtual_gb parameter is greater than 0. Fix that and rename the fake_store() function to lba2fake_store() to lessen confusion with the global fake_storep pointer. Bump version date. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reported-by: Bart Van Assche <bvanassche@acm.org> Tested by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: libfc: free skb when receiving invalid flogi respMing Lu1-3/+3
The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses. This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`. Signed-off-by: Ming Lu <ming.lu@citrix.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: zfcp: fix sysfs block queue limit output for max_segment_sizeSteffen Maier2-1/+2
Since v2.6.35 commit 683229845f17 ("[SCSI] zfcp: Report scatter-gather limits to SCSI and block layer"), zfcp set dma_parms.max_segment_size == PAGE_SIZE (but without using the setter dma_set_max_seg_size()) and scsi_host_template.dma_boundary == PAGE_SIZE - 1. v5.0-rc1 commit 50c2e9107f17 ("scsi: introduce a max_segment_size host_template parameters") introduced a new field scsi_host_template.max_segment_size. If an LLDD such as zfcp does not set it, scsi_host_alloc() uses BLK_MAX_SEGMENT_SIZE = 65536 for Scsi_Host.max_segment_size. __scsi_init_queue() announced the minimum of Scsi_Host.max_segment_size and dma_parms.max_segment_size to the block layer. For zfcp: min(65536, 4096) == 4096 which was still good. v5.0 commit a8cf59a6692c ("scsi: communicate max segment size to the DMA mapping code") announces Scsi_Host.max_segment_size to the block layer and overwrites dma_parms.max_segment_size with Scsi_Host.max_segment_size. For zfcp dma_parms.max_segment_size == Scsi_Host.max_segment_size == 65536 which is also reflected in block queue limits. $ cd /sys/bus/ccw/drivers/zfcp $ cd 0.0.3c40/host5/rport-5:0-4/target5:0:4/5:0:4:10/block/sdi/queue $ cat max_segment_size 65536 Zfcp I/O still works because dma_boundary implicitly still keeps the effective max segment size <= PAGE_SIZE. However, dma_boundary does not seem visible to user space, but max_segment_size is visible and shows a misleading wrong value. Fix it and inherit the stable tag of a8cf59a6692c. Devices on our bus ccw support DMA but no DMA mapping. Of multiple device types on the ccw bus, only zfcp needs dma_parms for SCSI limits. So, leave dma_parms setup in zfcp and do not move it to the bus. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-28md/raid5: fix 'out of memory' during raid cache recoveryAlexei Naberezhnov2-13/+28
This fixes the case when md array assembly fails because of raid cache recovery unable to allocate a stripe, despite attempts to replay stripes and increase cache size. This happens because stripes released by r5c_recovery_replay_stripes and raid5_set_cache_size don't become available for allocation immediately. Released stripes first are placed on conf->released_stripes list and require md thread to merge them on conf->inactive_list before they can be allocated. Patch allows final allocation attempt during cache recovery to wait for new stripes to become availabe for allocation. Cc: linux-raid@vger.kernel.org Cc: Shaohua Li <shli@kernel.org> Cc: linux-stable <stable@vger.kernel.org> # 4.10+ Fixes: b4c625c67362 ("md/r5cache: r5cache recovery: part 1") Signed-off-by: Alexei Naberezhnov <anaberezhnov@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-01-28qed: Fix stack out of bounds bugManish Chopra1-4/+4
KASAN reported following bug in qed_init_qm_get_idx_from_flags due to inappropriate casting of "pq_flags". Fix the type of "pq_flags". [ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712 [ 196.624714] [ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1 [ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018 [ 196.624733] Workqueue: events work_for_cpu_fn [ 196.624738] Call trace: [ 196.624742] dump_backtrace+0x0/0x2f8 [ 196.624745] show_stack+0x24/0x30 [ 196.624749] dump_stack+0xe0/0x11c [ 196.624755] print_address_description+0x68/0x260 [ 196.624759] kasan_report+0x178/0x340 [ 196.624762] __asan_report_load_n_noabort+0x38/0x48 [ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed] [ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed] [ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed] [ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede] [ 196.624874] qede_probe+0x78/0xf0 [qede] [ 196.624879] local_pci_probe+0xc4/0x180 [ 196.624882] work_for_cpu_fn+0x54/0x98 [ 196.624885] process_one_work+0x758/0x1900 [ 196.624888] worker_thread+0x4e0/0xd18 [ 196.624892] kthread+0x2c8/0x350 [ 196.624897] ret_from_fork+0x10/0x18 [ 196.624899] [ 196.624902] Allocated by task 2: [ 196.624906] kasan_kmalloc.part.1+0x40/0x108 [ 196.624909] kasan_kmalloc+0xb4/0xc8 [ 196.624913] kasan_slab_alloc+0x14/0x20 [ 196.624916] kmem_cache_alloc_node+0x1dc/0x480 [ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98 [ 196.624924] _do_fork+0x150/0xfa0 [ 196.624926] kernel_thread+0x48/0x58 [ 196.624930] kthreadd+0x3a4/0x5a0 [ 196.624932] ret_from_fork+0x10/0x18 [ 196.624934] [ 196.624937] Freed by task 0: [ 196.624938] (stack is not available) [ 196.624940] [ 196.624943] The buggy address belongs to the object at ffff809b00bc0000 [ 196.624943] which belongs to the cache thread_stack of size 32768 [ 196.624946] The buggy address is located 29536 bytes inside of [ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000) [ 196.624948] The buggy address belongs to the page: [ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0 [ 196.624960] flags: 0xfffff8000008100(slab|head) [ 196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000 [ 196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 196.624973] page dumped because: kasan: bad access detected [ 196.624974] [ 196.624976] Memory state around the buggy address: [ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 [ 196.624988] ^ [ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624995] ================================================================== Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28qed: Fix system crash in ll2 xmitManish Chopra1-5/+15
Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28qed: Fix VF probe failure while FLRManish Chopra1-0/+10
VFs may hit VF-PF channel timeout while probing, as in some cases it was observed that VF FLR and VF "acquire" message transaction (i.e first message from VF to PF in VF's probe flow) could occur simultaneously which could lead VF to fail sending "acquire" message to PF as VF is marked disabled from HW perspective due to FLR, which will result into channel timeout and VF probe failure. In such cases, try retrying VF "acquire" message so that in later attempts it could be successful to pass message to PF after the VF FLR is completed and can be probed successfully. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28qed: Fix LACP pdu drops for VFsManish Chopra3-2/+16
VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully. This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28qed: Fix bug in tx promiscuous mode settingsManish Chopra1-1/+6
When running tx switched traffic between VNICs created via a bridge(to which VFs are added), adapter drops the unicast packets in tx flow due to VNIC's ucast mac being unknown to it. But VF interfaces being in promiscuous mode should have caused adapter to accept all the unknown ucast packets. Later, it was found that driver doesn't really configure tx promiscuous mode settings to accept all unknown unicast macs. This patch fixes tx promiscuous mode settings to accept all unknown/unmatched unicast macs and works out the scenario. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called in i596_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <albin_yang@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28gpio: vf610: Mask all GPIO interruptsAndrew Lunn1-0/+5
On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-28mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delayChaotian Jing1-1/+1
to set cmd internal delay, need set PAD_TUNE register but not PAD_CMD_TUNE register. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Fixes: 1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-28mmc: bcm2835: Fix DMA channel leak on probe errorLukas Wunner1-0/+2
The BCM2835 MMC host driver requests a DMA channel on probe but neglects to release the channel in the probe error path. The channel may therefore be leaked, in particular if devm_clk_get() causes probe deferral. Fix it. Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.12+ Cc: Frank Pavlic <f.pavlic@kunbus.de> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-27net: dsa: mv88e6xxx: Fix serdes irq setup going recursiveAndrew Lunn1-1/+1
Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly after the machine blows up. Fixes: 2defda1f4b91 ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()Alexey Khoroshilov1-1/+3
If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: hns: Fix wrong read accesses via Clause 45 MDIO protocolYonglong Liu1-1/+1
When reading phy registers via Clause 45 MDIO protocol, after write address operation, the driver use another write address operation, so can not read the right value of any phy registers. This patch fixes it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: hns: Restart autoneg need return failed when autoneg offYonglong Liu1-7/+9
The hns driver of earlier devices, when autoneg off, restart autoneg will return -EINVAL, so make the hns driver for the latest devices do the same. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: hns: Fix for missing of_node_put() after of_parse_phandle()Yonglong Liu1-0/+5
In hns enet driver, we use of_parse_handle() to get hold of the device node related to "ae-handle" but we have missed to put the node reference using of_node_put() after we are done using the node. This patch fixes it. Note: This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217 Fixes: 48189d6aaf1e ("net: hns: enet specifies a reference to dsaf") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds4-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A small set of fixes for the interrupt subsystem: - Fix a double increment in the irq descriptor allocator which resulted in a sanity check only being done for every second affinity mask - Add a missing device tree translation in the stm32-exti driver. Without that the interrupt association is completely wrong. - Initialize the mutex in the GIC-V3 MBI driver - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so multi MSI allocations work correctly - Ensure that the initial affinity of a interrupt is not empty at startup time. - Drop bogus include in the madera irq chip driver - Fix KernelDoc regression" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size genirq/irqdesc: Fix double increment in alloc_descs() genirq: Fix the kerneldoc comment for struct irq_affinity_desc irqchip/madera: Drop GPIO includes irqchip/gic-v3-mbi: Fix uninitialized mbi_lock irqchip/stm32-exti: Add domain translate function genirq: Make sure the initial affinity is not empty
2019-01-27Merge tag 'mlx5-fixes-2019-01-25' of ↵David S. Miller6-19/+58
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-01-25 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.13 ('net/mlx5e: Allow MAC invalidation while spoofchk is ON') For -stable v4.18 ('Revert "net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager"') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge tag 'edac_fix_for_5.0' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "Fix persistent register offsets of altera_edac, from Thor Thayer" * tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, altera: Fix S10 persistent register offset
2019-01-27net: altera_tse: fix msgdma_tx_completion on non-zero fill_level caseTomonori Sakita1-1/+2
If fill_level was not zero and status was not BUSY, result of "tx_prod - tx_cons - inuse" might be zero. Subtracting 1 unconditionally results invalid negative return value on this case. Make sure not to return an negative value. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+2
Pull dma-mapping fix from Christoph Hellwig: "Fix a xen-swiotlb regression on arm64" * tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping: arm64/xen: fix xen-swiotlb cache flushing
2019-01-27Merge tag 'libnvdimm-fixes-5.0-rc4' of ↵Linus Torvalds4-24/+71
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A fix for namespace label support for non-Intel NVDIMMs that implement the ACPI standard label method. This has apparently never worked and could wait for v5.1. However it has enough visibility with hardware vendors [1] and distro bug trackers [2], and low enough risk that I decided it should go in for -rc4. The other fixups target the new, for v5.0, nvdimm security functionality. The larger init path fixup closes a memory leak and a potential userspace lockup due to missed notifications. [1] https://github.com/pmem/ndctl/issues/78 [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785 These have all soaked in -next for a week with no reported issues. Summary: - Fix support for NVDIMMs that implement the ACPI standard label methods. - Fix error handling for security overwrite (memory leak / userspace hang condition), and another one-line security cleanup" * tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: acpi/nfit: Fix command-supported detection acpi/nfit: Block function zero DSMs libnvdimm/security: Require nvdimm_security_setup_events() to succeed nfit_test: fix security state pull for nvdimm security nfit_test
2019-01-27Merge branch 'for-linus' of ↵Linus Torvalds4-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fixup for the input_event fix for y2038 Sparc64, and couple other minor fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: input_event - fix the CONFIG_SPARC64 mixup Input: olpc_apsp - assign priv->dev earlier Input: uinput - fix undefined behavior in uinput_validate_absinfo() Input: raspberrypi-ts - fix link error Input: xpad - add support for SteelSeries Stratus Duo Input: input_event - provide override for sparc64
2019-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds22-193/+251
Pull networking fixes from David Miller: 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland. 2) Integer overflow in ktime handling of bcm can code, from Oliver Hartkopp. 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon Horman. 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang. 5) Use after free in ax25, from Eric Dumazet. 6) Several fixes to the SSN support in SCTP, from Xin Long. 7) Do not process frames after a NAPI reschedule in ibmveth, from Thomas Falcon. 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) qed: Revert error handling changes. cfg80211: extend range deviation for DMG cfg80211: reg: remove warn_on for a normal case mac80211: Add attribute aligned(2) to struct 'action' mac80211: don't initiate TDLS connection if station is not associated to AP nl80211: fix NLA_POLICY_NESTED() arguments ibmveth: Do not process frames after calling napi_reschedule net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP net: usb: asix: ax88772_bind return error when hw_reset fail MAINTAINERS: Update cavium networking drivers net/mlx4_core: Fix error handling when initializing CQ bufs in the driver net/mlx4_core: Add masking for a few queries on HCA caps sctp: set flow sport from saddr only when it's 0 sctp: set chunk transport correctly when it's a new asoc sctp: improve the events for sctp stream adding sctp: improve the events for sctp stream reset ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel ax25: fix possible use-after-free sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe hv_netvsc: fix typos in code comments ...
2019-01-26Merge tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds2-25/+17
Pull VFIO fixes from Alex Williamson: - cleanup licenses in new files (Thomas Gleixner) - cleanup new compiler warnings (Alexey Kardashevskiy) * tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci/nvlink2: Fix ancient gcc warnings vfio/pci: Cleanup license mess
2019-01-26Merge tag 'scsi-fixes' of ↵Linus Torvalds12-45/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fixes, all of which appear to have user visible consequences. The DMA one is a regression fix from the merge window and of the others, four are driver specific and one specific to the target code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Use explicit access size in ufshcd_dump_regs scsi: tcmu: fix use after free scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state() scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport scsi: communicate max segment size to the DMA mapping code
2019-01-26Merge tag 'for-linus-20190125' of git://git.kernel.dk/linux-blockLinus Torvalds4-32/+69
Pull block fixes from Jens Axboe: "A collection of fixes for this release. This contains: - Silence sparse rightfully complaining about non-static wbt functions (Bart) - Fixes for the zoned comments/ioctl documentation (Damien) - direct-io fix that's been lingering for a while (Ernesto) - cgroup writeback fix (Tejun) - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju) - Block recursion tracking fix (Ming) - Fix debugfs command flag naming for a few flags (Jianchao)" * tag 'for-linus-20190125' of git://git.kernel.dk/linux-block: block: Fix comment typo uapi: fix ioctl documentation blk-wbt: Declare local functions static blk-mq: fix the cmd_flag_name array nvme-multipath: drop optimization for static ANA group IDs nvmet-rdma: fix null dereference under heavy load nvme-rdma: rework queue maps handling nvme-tcp: fix timeout handler nvme-rdma: fix timeout handler writeback: synchronize sync(2) against cgroup writeback membership switches block: cover another queue enter recursion via BIO_QUEUE_ENTERED direct-io: allow direct writes to empty inodes