summaryrefslogtreecommitdiff
path: root/drivers/vfio
AgeCommit message (Collapse)AuthorFilesLines
2020-04-23vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()Sean Christopherson1-2/+2
Use follow_pfn() to get the PFN of a PFNMAP VMA instead of assuming that vma->vm_pgoff holds the base PFN of the VMA. This fixes a bug where attempting to do VFIO_IOMMU_MAP_DMA on an arbitrary PFNMAP'd region of memory calculates garbage for the PFN. Hilariously, this only got detected because the first "PFN" calculated by vaddr_get_pfn() is PFN 0 (vma->vm_pgoff==0), and iommu_iova_to_phys() uses PA==0 as an error, which triggers a WARN in vfio_unmap_unpin() because the translation "failed". PFN 0 is now unconditionally reserved on x86 in order to mitigate L1TF, which causes is_invalid_reserved_pfn() to return true and in turns results in vaddr_get_pfn() returning success for PFN 0. Eventually the bogus calculation runs into PFNs that aren't reserved and leads to failure in vfio_pin_map_dma(). The subsequent call to vfio_remove_dma() attempts to unmap PFN 0 and WARNs. WARNING: CPU: 8 PID: 5130 at drivers/vfio/vfio_iommu_type1.c:750 vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio ... CPU: 8 PID: 5130 Comm: sgx Tainted: G W 5.6.0-rc5-705d787c7fee-vfio+ #3 Hardware name: Intel Corporation Mehlow UP Server Platform/Moss Beach Server, BIOS CNLSE2R1.D00.X119.B49.1803010910 03/01/2018 RIP: 0010:vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1] Code: <0f> 0b 49 81 c5 00 10 00 00 e9 c5 fe ff ff bb 00 10 00 00 e9 3d fe RSP: 0018:ffffbeb5039ebda8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9a55cbf8d480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a52b771c200 RBP: 0000000000000000 R08: 0000000000000040 R09: 00000000fffffff2 R10: 0000000000000001 R11: ffff9a51fa896000 R12: 0000000184010000 R13: 0000000184000000 R14: 0000000000010000 R15: ffff9a55cb66ea08 FS: 00007f15d3830b40(0000) GS:ffff9a55d5600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561cf39429e0 CR3: 000000084f75f005 CR4: 00000000003626e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vfio_remove_dma+0x17/0x70 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0x9e3/0xa7b [vfio_iommu_type1] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4c/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f15d04c75d7 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-20vfio: avoid possible overflow in vfio_iommu_type1_pin_pagesYan Zhao1-1/+1
add parentheses to avoid possible vaddr overflow. Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices") Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-20vfio: checking of validity of user vaddr in vfio_dma_rwYan Zhao1-2/+2
instead of calling __copy_to/from_user(), use copy_to_from_user() to ensure vaddr range is a valid user address range before accessing them. Fixes: 8d46c0cca5f4 ("vfio: introduce vfio_dma_rw to read/write a range of IOVAs") Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-01vfio: Ignore -ENODEV when getting MSI cookieAndre Przywara1-1/+1
When we try to get an MSI cookie for a VFIO device, that can fail if CONFIG_IOMMU_DMA is not set. In this case iommu_get_msi_cookie() returns -ENODEV, and that should not be fatal. Ignore that case and proceed with the initialisation. This fixes VFIO with a platform device on the Calxeda Midway (no MSIs). Fixes: f6810c15cf973f ("iommu/arm-smmu: Clean up early-probing workarounds") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-01vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]Sam Bobroff1-2/+8
Older versions of skiboot only provide a single value in the device tree property "ibm,mmio-atsd", even when multiple Address Translation Shoot Down (ATSD) registers are present. This prevents NVLink2 devices (other than the first) from being used with vfio-pci because vfio-pci expects to be able to assign a dedicated ATSD register to each NVLink2 device. However, ATSD registers can be shared among devices. This change allows vfio-pci to fall back to sharing the register at index 0 if necessary. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24Merge branches 'v5.7/vfio/alex-sriov-v3' and 'v5.7/vfio/yan-dma-rw-v4' into ↵Alex Williamson4-28/+646
v5.7/vfio/next
2020-03-24vfio/pci: Cleanup .probe() exit pathsAlex Williamson1-29/+25
The cleanup is getting a tad long. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Remove dev_fmt definitionAlex Williamson1-1/+0
It currently results in messages like: "vfio-pci 0000:03:00.0: vfio_pci: ..." Which is quite a bit redundant. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Add sriov_configure supportAlex Williamson2-11/+97
With the VF Token interface we can now expect that a vfio userspace driver must be in collaboration with the PF driver, an unwitting userspace driver will not be able to get past the GET_DEVICE_FD step in accessing the device. We can now move on to actually allowing SR-IOV to be enabled by vfio-pci on the PF. Support for this is not enabled by default in this commit, but it does provide a module option for this to be enabled (enable_sriov=1). Enabling VFs is rather straightforward, except we don't want to risk that a VF might get autoprobed and bound to other drivers, so a bus notifier is used to "capture" VFs to vfio-pci using the driver_override support. We assume any later action to bind the device to other drivers is condoned by the system admin and allow it with a log warning. vfio-pci will disable SR-IOV on a PF before releasing the device, allowing a VF driver to be assured other drivers cannot take over the PF and that any other userspace driver must know the shared VF token. This support also does not provide a mechanism for the PF userspace driver itself to manipulate SR-IOV through the vfio API. With this patch SR-IOV can only be enabled via the host sysfs interface and the PF driver user cannot create or remove VFs. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first userAlex Williamson1-0/+59
The VFIO_DEVICE_FEATURE ioctl is meant to be a general purpose, device agnostic ioctl for setting, retrieving, and probing device features. This implementation provides a 16-bit field for specifying a feature index, where the data porition of the ioctl is determined by the semantics for the given feature. Additional flag bits indicate the direction and nature of the operation; SET indicates user data is provided into the device feature, GET indicates the device feature is written out into user data. The PROBE flag augments determining whether the given feature is supported, and if provided, whether the given operation on the feature is supported. The first user of this ioctl is for setting the vfio-pci VF token, where the user provides a shared secret key (UUID) on a SR-IOV PF device, which users must provide when opening associated VF devices. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Introduce VF tokenAlex Williamson2-1/+205
If we enable SR-IOV on a vfio-pci owned PF, the resulting VFs are not fully isolated from the PF. The PF can always cause a denial of service to the VF, even if by simply resetting itself. The degree to which a PF can access the data passed through a VF or interfere with its operation is dependent on a given SR-IOV implementation. Therefore we want to avoid a scenario where an existing vfio-pci based userspace driver might assume the PF driver is trusted, for example assigning a PF to one VM and VF to another with some expectation of isolation. IOMMU grouping could be a solution to this, but imposes an unnecessarily strong relationship between PF and VF drivers if they need to operate with the same IOMMU context. Instead we introduce a "VF token", which is essentially just a shared secret between PF and VF drivers, implemented as a UUID. The VF token can be set by a vfio-pci based PF driver and must be known by the vfio-pci based VF driver in order to gain access to the device. This allows the degree to which this VF token is considered secret to be determined by the applications and environment. For example a VM might generate a random UUID known only internally to the hypervisor while a userspace networking appliance might use a shared, or even well know, UUID among the application drivers. To incorporate this VF token, the VFIO_GROUP_GET_DEVICE_FD interface is extended to accept key=value pairs in addition to the device name. This allows us to most easily deny user access to the device without risk that existing userspace drivers assume region offsets, IRQs, and other device features, leading to more elaborate error paths. The format of these options are expected to take the form: "$DEVICE_NAME $OPTION1=$VALUE1 $OPTION2=$VALUE2" Where the device name is always provided first for compatibility and additional options are specified in a space separated list. The relation between and requirements for the additional options will be vfio bus driver dependent, however unknown or unused option within this schema should return error. This allow for future use of unknown options as well as a positive indication to the user that an option is used. An example VF token option would take this form: "0000:03:00.0 vf_token=2ab74924-c335-45f4-9b16-8569e5b08258" When accessing a VF where the PF is making use of vfio-pci, the user MUST provide the current vf_token. When accessing a PF, the user MUST provide the current vf_token IF there are active VF users or MAY provide a vf_token in order to set the current VF token when no VF users are active. The former requirement assures VF users that an unassociated driver cannot usurp the PF device. These semantics also imply that a VF token MUST be set by a PF driver before VF drivers can access their device, the default token is random and mechanisms to read the token are not provided in order to protect the VF token of previous users. Use of the vf_token option outside of these cases will return an error, as discussed above. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Implement match opsAlex Williamson1-0/+8
This currently serves the same purpose as the default implementation but will be expanded for additional functionality. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: Include optional device match in vfio_device_ops callbacksAlex Williamson1-4/+16
Allow bus drivers to provide their own callback to match a device to the user provided string. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pagesYan Zhao1-0/+91
vfio_group_pin_pages() and vfio_group_unpin_pages() are introduced to avoid inefficient search/check/ref/deref opertions associated with VFIO group as those in each calling into vfio_pin_pages() and vfio_unpin_pages(). VFIO group is taken as arg directly. The callers combine search/check/ref/deref operations associated with VFIO group by calling vfio_group_get_external_user()/vfio_group_get_external_user_from_dev() beforehand, and vfio_group_put_external_user() afterwards. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: introduce vfio_dma_rw to read/write a range of IOVAsYan Zhao2-0/+125
vfio_dma_rw will read/write a range of user space memory pointed to by IOVA into/from a kernel buffer without enforcing pinning the user space memory. TODO: mark the IOVAs to user space memory dirty if they are written in vfio_dma_rw(). Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: allow external user to get vfio group from deviceYan Zhao1-0/+38
external user calls vfio_group_get_external_user_from_dev() with a device pointer to get the VFIO group associated with this device. The VFIO group is checked to be vialbe and have IOMMU set. Then container user counter is increased and VFIO group reference is hold to prevent the VFIO group from disposal before external user exits. when the external user finishes using of the VFIO group, it calls vfio_group_put_external_user() to dereference the VFIO group and the container user counter. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: platform: Switch to platform_get_irq_optional()Eric Auger1-1/+1
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"), platform_get_irq() calls dev_err() on an error. As we enumerate all interrupts until platform_get_irq() fails, we now systematically get a message such as: "vfio-platform fff51000.ethernet: IRQ index 3 not found" which is a false positive. Let's use platform_get_irq_optional() instead. Signed-off-by: Eric Auger <eric.auger@redhat.com> Cc: stable@vger.kernel.org # v5.3+ Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-02-03Merge tag 'vfio-v5.6-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds4-7/+9
Pull VFIO updates from Alex Williamson: - Fix nvlink error path (Alexey Kardashevskiy) - Update nvlink and spapr to use mmgrab() (Julia Lawall) - Update static declaration (Ben Dooks) - Annotate __iomem to fix sparse warnings (Ben Dooks) * tag 'vfio-v5.6-rc1' of git://github.com/awilliam/linux-vfio: vfio: platform: fix __iomem in vfio_platform_amdxgbe.c vfio/mdev: make create attribute static vfio/spapr_tce: use mmgrab vfio: vfio_pci_nvlink2: use mmgrab vfio/spapr/nvlink2: Skip unpinning pages on error exit
2020-01-31mm, tree-wide: rename put_user_page*() to unpin_user_page*()John Hubbard1-1/+1
In order to provide a clearer, more symmetric API for pinning and unpinning DMA pages. This way, pin_user_pages*() calls match up with unpin_user_pages*() calls, and the API is a lot closer to being self-explanatory. Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31vfio, mm: pin_user_pages (FOLL_PIN) and put_user_page() conversionJohn Hubbard1-4/+3
1. Change vfio from get_user_pages_remote(), to pin_user_pages_remote(). 2. Because all FOLL_PIN-acquired pages must be released via put_user_page(), also convert the put_page() call over to put_user_pages_dirty_lock(). Note that this effectively changes the code's behavior in vfio_iommu_type1.c: put_pfn(): it now ultimately calls set_page_dirty_lock(), instead of set_page_dirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [1] [1] https://lore.kernel.org/r/20190723153640.GB720@lst.de Link: http://lkml.kernel.org/r/20200107224558.2362728-20-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31vfio: fix FOLL_LONGTERM use, simplify get_user_pages_remote() callJohn Hubbard1-25/+5
Update VFIO to take advantage of the recently loosened restriction on FOLL_LONGTERM with get_user_pages_remote(). Also, now it is possible to fix a bug: the VFIO caller is logically a FOLL_LONGTERM user, but it wasn't setting FOLL_LONGTERM. Also, remove an unnessary pair of calls that were releasing and reacquiring the mmap_sem. There is no need to avoid holding mmap_sem just in order to call page_to_pfn(). Also, now that the the DAX check ("if a VMA is DAX, don't allow long term pinning") is in the internals of get_user_pages_remote() and __gup_longterm_locked(), there's no need for it at the VFIO call site. So remove it. Link: http://lkml.kernel.org/r/20200107224558.2362728-8-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-09vfio: platform: fix __iomem in vfio_platform_amdxgbe.cBen Dooks (Codethink)1-2/+2
The ioaddr should have __iomem marker on it, so add that to fix the following sparse warnings: drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:33:44: warning: incorrect type in argument 2 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:33:44: expected void volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:33:44: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:34:33: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:34:33: expected void const volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:34:33: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:44:44: warning: incorrect type in argument 2 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:44:44: expected void volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:44:44: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:45:33: warning: incorrect type in argument 2 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:45:33: expected void volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:45:33: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:69:41: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:69:41: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:69:41: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:71:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:71:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:71:30: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:76:49: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:76:49: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:76:49: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:85:37: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:85:37: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:85:37: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:87:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:87:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:87:30: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:90:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:90:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:90:30: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:93:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:93:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:93:30: got void [noderef] <asn:2> *ioaddr Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-09vfio/mdev: make create attribute staticBen Dooks (Codethink)1-1/+1
The create attribute is not exported, so make it static to avoid the following sparse warning: drivers/vfio/mdev/mdev_sysfs.c:77:1: warning: symbol 'mdev_type_attr_create' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-07vfio/spapr_tce: use mmgrabJulia Lawall1-1/+1
Mmgrab was introduced in commit f1f1007644ff ("mm: add new mmgrab() helper") and most of the kernel was updated to use it. Update a remaining file. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression e; @@ - atomic_inc(&e->mm_count); + mmgrab(e); </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-07vfio: vfio_pci_nvlink2: use mmgrabJulia Lawall1-1/+1
Mmgrab was introduced in commit f1f1007644ff ("mm: add new mmgrab() helper") and most of the kernel was updated to use it. Update a remaining file. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression e; @@ - atomic_inc(&e->mm_count); + mmgrab(e); </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-06vfio/spapr/nvlink2: Skip unpinning pages on error exitAlexey Kardashevskiy1-2/+4
The nvlink2 subdriver for IBM Witherspoon machines preregisters GPU memory in the IOMMI API so KVM TCE code can map this memory for DMA as well. This is done by mm_iommu_newdev() called from vfio_pci_nvgpu_regops::mmap. In an unlikely event of failure the data->mem remains NULL and since mm_iommu_put() (which unregisters the region and unpins memory if that was regular memory) does not expect mem=NULL, it should not be called. This adds a check to only call mm_iommu_put() for a valid data->mem. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig5-7/+7
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-07Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-23/+5
Pull VFIO updates from Alex Williamson: - Remove hugepage checks for reserved pfns (Ben Luo) - Fix irq-bypass unregister ordering (Jiang Yi) * tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: call irq_bypass_unregister_producer() before freeing irq vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()
2019-12-04Merge branch 'v5.5/vfio/jiang-yi-irq-bypass-unregister-v1' into v5.5/vfio/nextAlex Williamson1-1/+1
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds3-21/+26
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-02vfio/pci: call irq_bypass_unregister_producer() before freeing irqJiang Yi1-1/+1
Since irq_bypass_register_producer() is called after request_irq(), we should do tear-down in reverse order: irq_bypass_unregister_producer() then free_irq(). Specifically free_irq() may release resources required by the irqbypass del_producer() callback. Notably an example provided by Marc Zyngier on arm64 with GICv4 that he indicates has the potential to wedge the hardware: free_irq(irq) __free_irq(irq) irq_domain_deactivate_irq(irq) its_irq_domain_deactivate() [unmap the VLPI from the ITS] kvm_arch_irq_bypass_del_producer(cons, prod) kvm_vgic_v4_unset_forwarding(kvm, irq, ...) its_unmap_vlpi(irq) [Unmap the VLPI from the ITS (again), remap the original LPI] Signed-off-by: Jiang Yi <giangyi@amazon.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 6d7425f109d26 ("vfio: Register/unregister irq_bypass_producer") Link: https://lore.kernel.org/kvm/20191127164910.15888-1-giangyi@amazon.com Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> [aw: commit log] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-36/+3
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-10-23compat_ioctl: move drivers to compat_ptr_ioctlArnd Bergmann1-36/+3
Each of these drivers has a copy of the same trivial helper function to convert the pointer argument and then call the native ioctl handler. We now have a generic implementation of that, so use it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-18vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()Ben Luo1-22/+4
Currently, no hugepage split code can transfer the reserved bit from head to tail during the split, so checking the head can't make a difference in a racing condition with hugepage spliting. The buddy wouldn't allow a driver to allocate an hugepage if any subpage is reserved in the e820 map at boot, if any driver sets the reserved bit of head page before mapping the hugepage in userland, it needs to set the reserved bit in all subpages to be safe. Signed-off-by: Ben Luo <luoben@linux.alibaba.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-10-15vfio/type1: Initialize resv_msi_baseJoerg Roedel1-1/+1
After enabling CONFIG_IOMMU_DMA on X86 a new warning appears when compiling vfio: drivers/vfio/vfio_iommu_type1.c: In function ‘vfio_iommu_type1_attach_group’: drivers/vfio/vfio_iommu_type1.c:1827:7: warning: ‘resv_msi_base’ may be used uninitialized in this function [-Wmaybe-uninitialized] ret = iommu_get_msi_cookie(domain->domain, resv_msi_base); ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The warning is a false positive, because the call to iommu_get_msi_cookie() only happens when vfio_iommu_has_sw_msi() returned true. And that only happens when it also set resv_msi_base. But initialize the variable anyway to get rid of the warning. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov3-21/+26
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-09-25vfio/type1: untag user pointers in vaddr_get_pfnAndrey Konovalov1-0/+2
This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. vaddr_get_pfn() uses provided user pointers for vma lookups, which can only by done with untagged pointers. Untag user pointers in this function. Link: http://lkml.kernel.org/r/87422b4d72116a975896f2b19b00f38acbd28f33.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm: introduce page_shift()Matthew Wilcox (Oracle)1-4/+4
Replace PAGE_SHIFT + compound_order(page) with the new page_shift() function. Minor improvements in readability. [akpm@linux-foundation.org: fix build in tce_page_is_contained()] Link: http://lkml.kernel.org/r/201907241853.yNQTrJWd%25lkp@intel.com Link: http://lkml.kernel.org/r/20190721104612.19120-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-20Merge tag 'vfio-v5.4-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds3-20/+524
Pull VFIO updates from Alex Williamson: - Fix spapr iommu error case case (Alexey Kardashevskiy) - Consolidate region type definitions (Cornelia Huck) - Restore saved original PCI state on release (hexin) - Simplify mtty sample driver interrupt path (Parav Pandit) - Support for reporting valid IOVA regions to user (Shameer Kolothum) * tag 'vfio-v5.4-rc1' of git://github.com/awilliam/linux-vfio: vfio_pci: Restore original state on release vfio/type1: remove duplicate retrieval of reserved regions vfio/type1: Add IOVA range capability support vfio/type1: check dma map request is within a valid iova range vfio/spapr_tce: Fix incorrect tce_iommu_group memory free vfio-mdev/mtty: Simplify interrupt generation vfio: re-arrange vfio region definitions vfio/type1: Update iova list on detach vfio/type1: Check reserved region conflict and update iova list vfio/type1: Introduce iova list and add iommu aperture validity check
2019-09-20Merge tag 'powerpc-5.4-1' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This is a bit late, partly due to me travelling, and partly due to a power outage knocking out some of my test systems *while* I was travelling. - Initial support for running on a system with an Ultravisor, which is software that runs below the hypervisor and protects guests against some attacks by the hypervisor. - Support for building the kernel to run as a "Secure Virtual Machine", ie. as a guest capable of running on a system with an Ultravisor. - Some changes to our DMA code on bare metal, to allow devices with medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of DMA space. - Support for firmware assisted crash dumps on bare metal (powernv). - Two series fixing bugs in and refactoring our PCI EEH code. - A large series refactoring our exception entry code to use gas macros, both to make it more readable and also enable some future optimisations. As well as many cleanups and other minor features & fixups. Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand, Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar, Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm, Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu, Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom Lendacky, Vasant Hegde" * tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits) powerpc/mm/mce: Keep irqs disabled during lockless page table walk powerpc: Use ftrace_graph_ret_addr() when unwinding powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR ftrace: Look up the address of return_to_handler() using helpers powerpc: dump kernel log before carrying out fadump or kdump docs: powerpc: Add missing documentation reference powerpc/xmon: Fix output of XIVE IPI powerpc/xmon: Improve output of XIVE interrupts powerpc/mm/radix: remove useless kernel messages powerpc/fadump: support holes in kernel boot memory area powerpc/fadump: remove RMA_START and RMA_END macros powerpc/fadump: update documentation about option to release opalcore powerpc/fadump: consider f/w load area powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel powerpc/fadump: improve how crashed kernel's memory is reserved powerpc/fadump: consider reserved ranges while releasing memory powerpc/fadump: make crash memory ranges array allocation generic ...
2019-08-30vfio/spapr_tce: Invalidate multiple TCEs at onceAlexey Kardashevskiy1-6/+12
Invalidating a TCE cache entry for each updated TCE is quite expensive. This makes use of the new iommu_table_ops::xchg_no_kill()/tce_kill() callbacks to bring down the time spent in mapping a huge guest DMA window. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190829085252.72370-4-aik@ozlabs.ru
2019-08-23Merge branches 'v5.4/vfio/alexey-tce-memory-free-v1', ↵Alex Williamson3-20/+524
'v5.4/vfio/connie-re-arrange-v2', 'v5.4/vfio/hexin-pci-reset-v3', 'v5.4/vfio/parav-mtty-uuid-v2' and 'v5.4/vfio/shameer-iova-list-v8' into v5.4/vfio/next
2019-08-22vfio_pci: Restore original state on releasehexin1-4/+13
vfio_pci_enable() saves the device's initial configuration information with the intent that it is restored in vfio_pci_disable(). However, the commit referenced in Fixes: below replaced the call to __pci_reset_function_locked(), which is not wrapped in a state save and restore, with pci_try_reset_function(), which overwrites the restored device state with the current state before applying it to the device. Reinstate use of __pci_reset_function_locked() to return to the desired behavior. Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface") Signed-off-by: hexin <hexin15@baidu.com> Signed-off-by: Liu Qi <liuqi16@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/type1: remove duplicate retrieval of reserved regionsShameer Kolothum1-9/+6
As we now already have the reserved regions list, just pass that into vfio_iommu_has_sw_msi() fn. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/type1: Add IOVA range capability supportShameer Kolothum1-0/+101
This allows the user-space to retrieve the supported IOVA range(s), excluding any non-relaxable reserved regions. The implementation is based on capability chains, added to VFIO_IOMMU_GET_INFO ioctl. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/type1: check dma map request is within a valid iova rangeShameer Kolothum1-0/+26
This checks and rejects any dma map request outside valid iova range. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/spapr_tce: Fix incorrect tce_iommu_group memory freeAlexey Kardashevskiy1-4/+5
The @tcegrp variable is used in 1) a loop over attached groups 2) it stores a pointer to a newly allocated tce_iommu_group if 1) found nothing. However the error handler does not distinguish how we got there and incorrectly releases memory for a found+incompatible group. This fixes it by adding another error handling case. Fixes: 0bd971676e68 ("powerpc/powernv/npu: Add compound IOMMU groups") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/type1: Update iova list on detachShameer Kolothum1-0/+94
Get a copy of iova list on _group_detach and try to update the list. On success replace the current one with the copy. Leave the list as it is if update fails. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/type1: Check reserved region conflict and update iova listShameer Kolothum1-0/+98
This retrieves the reserved regions associated with dev group and checks for conflicts with any existing dma mappings. Also update the iova list excluding the reserved regions. Reserved regions with type IOMMU_RESV_DIRECT_RELAXABLE are excluded from above checks as they are considered as directly mapped regions which are known to be relaxable. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-08-19vfio/type1: Introduce iova list and add iommu aperture validity checkShameer Kolothum1-3/+181
This introduces an iova list that is valid for dma mappings. Make sure the new iommu aperture window doesn't conflict with the current one or with any existing dma mappings during attach. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-08 21:15:42 +0000