summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
AgeCommit message (Collapse)AuthorFilesLines
2020-06-13Merge branch 'i2c/for-5.8' of ↵Linus Torvalds63-1144/+5303
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has quite some patches for you this time. I hope it is the move to per-driver-maintainers which is now showing results. We will see. The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI), larger refactoring of the Designware, Tegra, and PXA drivers, the Cadence driver supports being a slave now, and there is support to instanciate SPD eeproms for well-known cases (which will be user-visible because the i801 driver supports it), and some devm_platform_ioremap_resource() conversions which blow up the diffstat. Note that I applied the Nuvoton driver quite late, so some minor fixup patches arrived during the merge window. I chose to apply them right away because they were trivial" * 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits) i2c: Drop stray comma in MODULE_AUTHOR statements i2c: npcm7xx: npcm_i2caddr[] can be static MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC i2c: npcm7xx: Fix a couple of error codes in probe i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n i2c: npcm7xx: Remove unnecessary parentheses i2c: npcm7xx: Add support for slave mode for Nuvoton i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver dt-bindings: i2c: npcm7xx: add NPCM I2C controller i2c: pxa: don't error out if there's no pinctrl i2c: add 'single-master' property to generic bindings i2c: designware: Add Baikal-T1 System I2C support i2c: designware: Move reg-space remapping into a dedicated function i2c: designware: Retrieve quirk flags as early as possible i2c: designware: Convert driver to using regmap API i2c: designware: Discard Cherry Trail model flag i2c: designware: Add Baytrail sem config DW I2C platform dependency i2c: designware: slave: Set DW I2C core module dependency i2c: designware: Use `-y` to build multi-object modules dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller ...
2020-06-11i2c: Drop stray comma in MODULE_AUTHOR statementsJean Delvare2-3/+3
It is not the common usage to have a comma between the name and the email address, so remove it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-11i2c: npcm7xx: npcm_i2caddr[] can be statickernel test robot1-1/+1
Fixes: f54736925a4f ("i2c: npcm7xx: Add support for slave mode for Nuvoton") Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-10Merge tag 'clk-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...
2020-06-08i2c: npcm7xx: Fix a couple of error codes in probeDan Carpenter1-2/+2
The code here is accidentally returning IS_ERR() which is 1 but it should be returning negative error codes with PTR_ERR(). Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-07i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=nMax Staudt1-0/+1
This has been found by the Kernel Test Robot: http://lkml.iu.edu/hypermail/linux/kernel/2006.0/06862.html With CONFIG_AMIGA_PCMCIA=n, io_mm.h does not pull in amigahw.h and ZTWO_VADDR is undefined. Add forgotten include to i2c-icy.c Fixes: 4768e90ecaec ("i2c: Add i2c-icy for I2C on m68k/Amiga") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Max Staudt <max@enpas.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-07i2c: npcm7xx: Remove unnecessary parenthesesGustavo A. R. Silva1-1/+1
Remove unnecessary parentheses around _bus_. This issue was found with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-05Merge tag 'gpio-v5.8-1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.8 kernel cycle. Core changes: - A new GPIO aggregator driver has been merged: this can join a few select GPIO lines into a new aggregated GPIO chip. This can be used for security: a process can be granted access to only these lines, for example for industrial control. Another way to use this is to reexpose certain select lines to a virtual machine or container. - Warn if the gpio-line-names is too long in he DT parser core. - GPIO lines can now be looked up by line name in addition to being looked up by offset. New drivers: - A new generic regmap GPIO driver has been merged. Too many regmap drivers are starting to look like each other so we need to create some common ground and try to move drivers over to using that. - The F7188X driver now supports F81865. Driver improvements: - Large improvements to the PCA953x expander, get multiple lines and several cleanups. - Large improvements to the DesignWare DWAPB driver, and Sergey Semin has volunteered to maintain it. - PL061 can now be built as a module, this is part of a bigger effort to make the ARM platforms more modular" * tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: pca953x: Drop unneeded ACPI_PTR() MAINTAINERS: Add gpio regmap section gpio: add a reusable generic gpio_chip using regmap gpiolib: Introduce gpiochip_irqchip_add_domain() gpio: gpiolib: Allow GPIO IRQs to lazy disable gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional gpio: rcar: Fix runtime PM imbalance on error gpio: pca935x: Allow IRQ support for driver built as a module gpio: pxa: Add COMPILE_TEST support dt-bindings: gpio: Add renesas,em-gio bindings MAINTAINERS: Fix file name for DesignWare GPIO DT schema gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt gpio: dwapb: avoid error message for optional IRQ gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration gpio: max730x: bring gpiochip_add_data after port config MAINTAINERS: Add GPIO Aggregator section docs: gpio: Add GPIO Aggregator documentation gpio: Add GPIO Aggregator gpiolib: Add support for GPIO lookup by line name ...
2020-06-03i2c: npcm7xx: Add support for slave mode for NuvotonTali Perry1-1/+607
Add support for slave mode for Nuvoton NPCM BMC I2C controller driver. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-03i2c: npcm7xx: Add Nuvoton NPCM I2C controller driverTali Perry3-0/+1746
Add Nuvoton NPCM BMC I2C controller driver. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-03i2c: pxa: don't error out if there's no pinctrlLubomir Rintel1-0/+2
The bus recovery patch regresses on OLPC XO-1.75 that has no pinctrl in its DT. Fixes: 7c9ec2c52518 ("i2c: pxa: implement generic i2c bus recovery")' Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-01Merge branches 'pm-core' and 'pm-sleep'Rafael J. Wysocki1-2/+2
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling
2020-05-30i2c: designware: Add Baikal-T1 System I2C supportSerge Semin3-3/+81
Baikal-T1 System Controller is equipped with a dedicated I2C Controller which functionality is based on the DW APB I2C IP-core, the only difference in a way it' registers are accessed. There are three access register provided in the System Controller registers map, which indirectly address the normal DW APB I2C registers space. So in order to have the Baikal-T1 System I2C Controller supported by the common DW APB I2C driver we created a dedicated Dw I2C controller model quirk, which retrieves the syscon regmap from the parental dt node and creates a new regmap based on it. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Move reg-space remapping into a dedicated functionSerge Semin1-5/+13
This is a preparation patch before adding a quirk with custom registers map creation required for the Baikal-T1 System I2C support. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Retrieve quirk flags as early as possibleSerge Semin1-2/+2
Some platforms might need to activate the driver quirks at a very early probe stage. For instance, Baikal-T1 System I2C doesn't need to map the registers space as ones belong to the system controller. Instead it will request the syscon regmap from the parental DT node. In order to be able to do so let's retrieve the model flags right after the DW I2C private data is created. While at it replace the or-assignment with just assignment operator since or-ing is redundant at this stage. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Convert driver to using regmap APISerge Semin5-156/+248
Seeing the DW I2C driver is using flags-based accessors with two conditional clauses it would be better to replace them with the regmap API IO methods and to initialize the regmap object with read/write callbacks specific to the controller registers map implementation. This will be also handy for the drivers with non-standard registers mapping (like an embedded into the Baikal-T1 System Controller DW I2C block, which glue-driver is a part of this series). As before the driver tries to detect the mapping setup at probe stage and creates a regmap object accordingly, which will be used by the rest of the code to correctly access the controller registers. In two places it was appropriate to convert the hand-written read-modify-write and read-poll-loop design patterns to the corresponding regmap API ready-to-use methods. Note the regmap IO methods return value is checked only at the probe stage. The rest of the code won't do this because basically we have MMIO-based regmap so non of the read/write methods can fail (this also won't be needed for the Baikal-T1-specific I2C controller). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [wsa: fix type of 'rx_valid' and remove outdated kdoc var description] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Discard Cherry Trail model flagSerge Semin3-4/+2
A PM workaround activated by the flag MODEL_CHERRYTRAIL has been removed since commit 9cbeeca05049 ("i2c: designware: Remove Cherry Trail PMIC I2C bus pm_disabled workaround"), but the flag most likely by mistake has been left in the Dw I2C drivers. Let's remove it. Since MODEL_MSCC_OCELOT is the only model-flag left, redefine it to be 0x100 so setting a very first bit in the MODEL_MASK bits range. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Add Baytrail sem config DW I2C platform dependencySerge Semin1-11/+12
Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C platform driver. It's a bit confusing to see it's config in the menu at some separated place with no reference to the platform code. Let's move the config definition to be below the I2C_DESIGNWARE_PLATFORM config and mark it with "depends on I2C_DESIGNWARE_PLATFORM" statement. By doing so the config menu will display the feature right below the DW I2C platform driver item and will indent it to the right so signifying its belonging. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: slave: Set DW I2C core module dependencySerge Semin1-0/+1
DW APB I2C slave code in fact depends on the DW I2C driver core, but not on the platform code as it used to be before commit 90bc1ee6de9f ("i2c: designware: Allow slave mode for PCI enumerated devices"). Yes, the I2C slave interface is currently supported by both the platform and PCI versions of the IP core, but it still depends on the DW I2C core functionality and must be available only if the last one is enabled. So make sure the DW APB I2C slave config is only available if the I2C_DESIGNWARE_CORE config is enabled. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-30i2c: designware: Use `-y` to build multi-object modulesSerge Semin1-10/+8
Since commit 4f8272802739 ("Documentation: update kbuild loadable modules goals & examples") `-objs` is fitted for building host programs, lets change DW I2C core, platform and PCI driver kbuild directives to using `-y`, which more straightforward for device drivers. By doing so we can discard the ifeq construction in favor to the more natural and less bulky `<module>-$(CONFIG_X) += x.o` Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-29i2c: sh_mobile: simplify code and remove false compilation warningViresh Kumar1-5/+2
This currently generates a warning: drivers/i2c/busses/i2c-sh_mobile.c: In function 'sh_mobile_i2c_isr': drivers/i2c/busses/i2c-sh_mobile.c:399:26: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] Though the code looks okay and shouldn't ever use the variable uninitialized. Fix the warning by moving the code around and getting rid of 'data'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [wsa: minor updates to commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-29i2c: i801: Instantiate SPD EEPROMs automaticallyJean Delvare1-0/+6
Call the function to instantiate SPD EEPROMs automatically on the main SMBus controller. Multiplexed SMBus systems are excluded for now as they are more complex to handle. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-27Merge tag 'v5.7-rc7' into develLinus Walleij6-15/+48
Linux 5.7-rc7
2020-05-27i2c: nvidia-gpu: Use PTR_ERR_OR_ZERO() to simplify codeAishwarya Ramakrishnan1-4/+1
PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR. Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Aishwarya Ramakrishnan <aishwaryarj100@gmail.com> Reviewed-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: efm32: Avoid unnecessary check in efm32_i2c_probe()Tang Bin1-3/+0
The function efm32_i2c_probe() is only called with an openfirmware platform device.Therefore there is no need to check that it has an openfirmware node. Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: efm32: Omit superfluous error message in efm32_i2c_probe()Tang Bin1-1/+0
In the function efm32_i2c_probe(),when get irq failed,the function platform_get_irq() logs an error message,so remove redundant message here. Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Drop hard coded FIFO depth assignmentAndy Shevchenko2-20/+0
It's not clear why the commit fe20ff5c7e9c ("i2c-designware: Add support for Designware core behind PCI devices.") followed by commit b61b14154b19 ("i2c-designware: add support for Intel Lynxpoint") chose to hard code FIFO depth size. The FIFO depth on all hardware, I have tested on, can be nicely detected automatically. Thus, we may safely drop hard coded FIFO sizes from the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Read counters from ACPI for PCI driverAndy Shevchenko1-0/+11
PCI devices may have been backed with ACPI handle which supplies an additional information to the drivers, such as counters. Call for ACPI configuration from PCI driver in order to utilize counters provided by ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Move ACPI parts into common moduleAndy Shevchenko3-119/+142
For possible code reuse in the future, move ACPI parts into common module. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Drop unneeded condition in i2c_dw_validate_speed()Andy Shevchenko1-8/+6
We may bailout directly from the loop instead of breaking it and testing a loop counter. This also gives advantages such as decreased indentation level along with dropped unneeded condition. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Move i2c_dw_validate_speed() helper to a common codeAndy Shevchenko3-24/+38
In order to export array supported speed for wider use, move it to a header along with i2c_dw_validate_speed() helper moved to a common code. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Include proper headers in i2c-desingware-core.hAndy Shevchenko1-0/+9
This header is a user of some generic ones, include them respectively. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-22i2c: designware: Get rid of PCI driver specifics in common codeAndy Shevchenko2-11/+14
Do not spread PCI specifics over common code. It seems to be a layering violation which can be easily avoided. Refactor PCI driver and drop PCI specifics from common code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-20i2c: pxa: implement generic i2c bus recoveryRussell King1-17/+159
Implement generic GPIO-based I2C bus recovery for the PXA I2C driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-20Merge tag 'for-5.8-i2c' of ↵Wolfram Sang1-69/+179
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into i2c/for-5.8 i2c: tegra: Changes for v5.8-rc1 This includes a few improvements to make the Tegra I2C controller behave properly on suspend/resume, does a bit of cleanup and adds support for the VI-variant of the I2C controller that is used primarily for video capture purposes.
2020-05-20i2c: altera: cleanup spinlockAtsushi Nemoto1-8/+4
Protect altr_i2c_int_enable() by the mutex and remove unneeded spinlock. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-20Merge branch 'i2c/for-current-fixed' into i2c/for-5.8Wolfram Sang6-15/+48
2020-05-20i2c: mediatek: Add i2c ac-timing adjust supportQii Wang1-51/+278
This patch adds a algorithm to calculate some ac-timing parameters which can fully meet I2C Spec. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-19ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;Joe Perches1-2/+1
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/ Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C part Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-05-18i2c: i801: Use GPIO_LOOKUP() helper macroGeert Uytterhoeven1-3/+3
i801_add_mux() fills in the GPIO lookup table by manually populating an array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper macro instead, to relax a dependency on the gpiod_lookup structure's member names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20200511145257.22970-2-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-15i2c: altera: Fix race between xfer_msg and isr threadAtsushi Nemoto1-1/+9
Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> [wsa: updated commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: at91: Fix pinmux after devm_gpiod_get() for bus recoveryCodrin Ciubotariu1-3/+17
devm_gpiod_get() usually calls gpio_request_enable() for non-strict pinmux drivers. These puts the pins in GPIO mode, whithout notifying the pinctrl driver. At this point, the I2C bus no longer owns the pins. To mux the pins back to the I2C bus, we use the pinctrl driver to change the state of the pins to GPIO, before using devm_gpiod_get(). After the pins are received as GPIOs, we switch theer pinctrl state back to the default one, Fixes: d3d3fdcc4c90 ("i2c: at91: implement i2c bus recovery") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-13i2c: designware: Allow slave mode for PCI enumerated devicesAndy Shevchenko2-13/+12
Allow slave mode for PCI enumerated devices by calling a common i2c_dw_probe() instead of i2c_dw_probe_master(). While dropping dependency to platform driver in slave module, move its configuration section above, closer to core. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-13i2c: designware: Rename i2c_dw_probe() to i2c_dw_probe_master()Andy Shevchenko5-10/+20
As a preparatory patch to support slave mode for PCI enumerated devices rename i2c_dw_probe() to i2c_dw_probe_master() and split common i2c_dw_probe() as inline helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-13i2c: designware: Switch PCI driver to use i2c_dw_configure_master()Andy Shevchenko1-26/+7
Since we have available helper to configure master mode, let's use it in the PCI driver instead of spread open-coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-13i2c: designware: Move configuration routines to respective modulesAndy Shevchenko4-37/+48
Move configuration routines to respective modules, i.e. master and slave. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-13i2c: designware: Use devm_platform_ioremap_resource() to simplify codeAndy Shevchenko1-6/+2
Use devm_platform_ioremap_resource() instead of platform_get_resource() + devm_ioremap_resource(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-12i2c: tegra: Add support for the VI I2C on Tegra210Thierry Reding1-2/+95
Tegra210 has an extra instance of the I2C controller that is in the domain of host1x and usually used for camera use-cases. The programming model for the VI variant of the controller is roughly the same as for the other variants, except that the I2C registers start at an offset and are spaced further apart. VI I2C also doesn't support slave mode. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12i2c: tegra: Use FIELD_PREP/FIELD_GET macrosThierry Reding1-41/+40
Using these macros helps increase readability of the code. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-12i2c: pxa: use master-abort for device probesRussell King1-8/+2
Use master-abort to send the stop condition after an address cycle rather than resetting the controller. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-16 08:05:37 +0000