path: root/drivers/gpu/vga
AgeCommit message (Collapse)AuthorFilesLines
2019-03-14Merge tag 'drm-misc-next-fixes-2019-03-13' of ↵Dave Airlie1-0/+49
git:// into drm-next - qxl: Remove the conflicting framebuffers earlier - Split out some i915 code into the fb_helper to allow the above Signed-off-by: Dave Airlie <> From: Maxime Ripard <> Link:
2019-03-07drm: move i915_kick_out_vgacon to vgaarbGerd Hoffmann1-0/+49
Also rename it to vga_remove_vgacon and add kerneldoc text. Signed-off-by: Gerd Hoffmann <> Reviewed-by: Daniel Vetter <> Link:
2019-01-15vga-switcheroo: make PCI dependency explicitSinan Kaya1-0/+1
This driver depends on the PCI infrastructure, but the dependency has not been explicitly called out. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <> Reviewed-by: Lukas Wunner <> Acked-by: Daniel Vetter <> Signed-off-by: Rafael J. Wysocki <>
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie1-7/+14
git:// into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <> From: Maarten Lankhorst <> Link:
2018-11-05vga_switcheroo: Fix missing gpu_bound call at audio client registrationTakashi Iwai1-0/+3
The commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") added a new ops gpu_bound to be called when GPU gets bound. The patch overlooked, however, that vga_switcheroo_enable() is called only once at GPU is bound. When an audio client is registered after that point, it would miss the gpu_bound call. This leads to the unexpected lack of runtime PM in HD-audio side. For addressing that regression, just call gpu_bound callback manually at vga_switcheroo_register_audio_client() when the GPU was already bound. Bugzilla: Fixes: 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") Cc: <> Reviewed-by: Lukas Wunner <> Signed-off-by: Takashi Iwai <>
2018-10-23vgaarb: Keep adding VGA device in queueAaron Ma1-1/+1
If failed to find the deivice owning the boot framebuffer, try to use the first VGA device instead of the last one. Usually the 1st device is integrated GPU who owns the boot framebuffer. Signed-off-by: Aaron Ma <> Acked-by: Alex Deucher <> Signed-off-by: Daniel Vetter <> Link:
2018-10-23vgaarb: Add support for 64-bit frame buffer addressAaron Ma1-6/+13
EFI GOP uses 64-bit frame buffer address when some BIOS disabled CSM support. vgaarb only stores lfb_base, this will lead boot framebuffer to wrong device. Add ext_lfb_base support to use 64-bit fb address. Signed-off-by: Aaron Ma <> Acked-by: Alex Deucher <> Signed-off-by: Daniel Vetter <> Link:
2018-09-13ALSA: hda - Enable runtime PM only for discrete GPUTakashi Iwai1-0/+2
The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <> Tested-by: Jian-Hong Pan <> Acked-by: Lukas Wunner <> Signed-off-by: Takashi Iwai <>
2018-07-17vga_switcheroo: set audio client id according to bound GPU idJim Qu1-11/+52
On modern laptop, there are more and more platforms have two GPUs, and each of them maybe have audio codec for HDMP/DP output. For some dGPU which is no output, audio codec usually is disabled. In currect HDA audio driver, it will set all codec as VGA_SWITCHEROO_DIS, the audio which is binded to UMA will be suspended if user use debugfs to contorl power In HDA driver side, it is difficult to know which GPU the audio has binded to. So set the bound gpu pci dev to vga_switcheroo. if the audio client is not the third registration, audio id will set in vga_switcheroo enable function. if the audio client is the last registration when vga_switcheroo _ready() get true, we should get audio client id from bound GPU directly. Signed-off-by: Jim Qu <> Reviewed-by: Lukas Wunner <> Signed-off-by: Takashi Iwai <>
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab2-2/+2
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <> Acked-by: Masami Hiramatsu <> Acked-by: Stephen Boyd <> Acked-by: Charles Keepax <> Acked-by: Mathieu Poirier <> Reviewed-by: Coly Li <> Signed-off-by: Mauro Carvalho Chehab <> Acked-by: Jonathan Corbet <>
2018-03-13vga_switcheroo: Let HDA autosuspend on mux changeLukas Wunner1-2/+6
When switching the display on muxed machines, we currently force the HDA controller into runtime suspend on the previously used GPU and into runtime active state on the newly used GPU. That's unnecessary if the GPU uses driver power control, we can just let the audio device autosuspend or autoresume as it sees fit. Cc: Dave Airlie <> Cc: Ben Skeggs <> Cc: Takashi Iwai <> Cc: Alex Deucher <> Reviewed-by: Peter Wu <> Signed-off-by: Lukas Wunner <> Link:
2018-03-13vga_switcheroo: Use device link for HDA controllerLukas Wunner1-107/+8
Back in 2013, runtime PM for GPUs with integrated HDA controller was introduced with commits 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)") and 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)"). Briefly, the idea was that the HDA controller is forced on and off in unison with the GPU. The original code is mostly still in place even though it was never a 100% perfect solution: E.g. on access to the HDA controller, the GPU is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there are no provisions to keep it resumed until access to the HDA controller has ceased: The GPU autosuspends after 5 seconds, rendering the HDA controller inaccessible. Additionally, a kludge is required when hda_intel.c probes: It has to check whether the GPU is powered down (check_hdmi_disabled()) and defer probing if so. However in the meantime (in v4.10) the driver core has gained a feature called device links which promises to solve such issues in a clean way: It allows us to declare a dependency from the HDA controller (consumer) to the GPU (supplier). The PM core then automagically ensures that the GPU is runtime resumed as long as the HDA controller's ->probe hook is executed and whenever the HDA controller is accessed. By default, the HDA controller has a dependency on its parent, a PCIe Root Port. Adding a device link creates another dependency on its sibling: PCIe Root Port ^ ^ | | | | HDA ===> GPU The device link is not only used for runtime PM, it also guarantees that on system sleep, the HDA controller suspends before the GPU and resumes after the GPU, and on system shutdown the HDA controller's ->shutdown hook is executed before the one of the GPU. It is a complete solution. Using this functionality is as simple as calling device_link_add(), which results in a dmesg entry like this: pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 The code for the GPU-governed audio power management can thus be removed (except where it's still needed for legacy manual power control). The device link is added in a PCI quirk rather than in hda_intel.c. It is therefore legal for the GPU to runtime suspend to D3cold even if the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL is not enabled, for accesses to the HDA controller will cause the GPU to wake up regardless if they're occurring outside of hda_intel.c (think config space readout via sysfs). Contrary to the previous implementation, the HDA controller's power state is now self-governed, rather than GPU-governed, whereas the GPU's power state is no longer fully self-governed. (The HDA controller needs to runtime suspend before the GPU can.) It is thus crucial that runtime PM is always activated on the HDA controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which is the default), lest the GPU stays awake. This is achieved by setting the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME flag on the HDA controller. A side effect is that power consumption might be reduced if the GPU is in use but the HDA controller is not, because the HDA controller is now allowed to go to D3hot. Before, it was forced to stay in D0 as long as the GPU was in use. (There is no reduction in power consumption on my Nvidia GK107, but there might be on other chips.) The code paths for legacy manual power control are adjusted such that runtime PM is disabled during power off, thereby preventing the PM core from resuming the HDA controller. Note that the device link is not only added on vga_switcheroo capable systems, but for *any* GPU with integrated HDA controller. The idea is that the HDA controller streams audio via connectors located on the GPU, so the GPU needs to be on for the HDA controller to do anything useful. This commit implicitly fixes an unbalanced runtime PM ref upon unbind of hda_intel.c: On ->probe, a runtime PM ref was previously released under the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but on ->remove a runtime PM ref was only acquired under the first of those conditions. Thus, binding and unbinding the driver twice on a vga_switcheroo capable system caused the runtime PM refcount to drop below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag is now always set if use_vga_switcheroo is true. For more information on device links please refer to: Documentation/driver-api/device_link.rst Cc: Dave Airlie <> Cc: Ben Skeggs <> Cc: Alex Deucher <> Cc: Rafael J. Wysocki <> Acked-by: Bjorn Helgaas <> Reviewed-by: Takashi Iwai <> Reviewed-by: Peter Wu <> Tested-by: Kai Heng Feng <> # AMD PowerXpress Tested-by: Mike Lothian <> # AMD PowerXpress Tested-by: Denis Lisov <> # Nvidia Optimus Tested-by: Peter Wu <> # Nvidia Optimus Tested-by: Lukas Wunner <> # MacBook Pro Signed-off-by: Lukas Wunner <> Link:
2018-03-13vga_switcheroo: Deduplicate power state trackingLukas Wunner1-12/+23
If DRM drivers use runtime PM, they currently notify vga_switcheroo whenever they ->runtime_suspend or ->runtime_resume to update vga_switcheroo's internal power state tracking. That's essentially a duplication of a functionality performed by the PM core as it already tracks the GPU's power state and vga_switcheroo can always query it. Introduce a new internal helper vga_switcheroo_pwr_state() which does just that if runtime PM is used, or falls back to vga_switcheroo's internal power state tracking if manual power control is used. Drop a redundant power state check in set_audio_state() while at it. This removes one of the two purposes of the notification mechanism implemented by vga_switcheroo_set_dynamic_switch(). The other one is power management of the audio device and we'll remove that next. Cc: Dave Airlie <> Cc: Ben Skeggs <> Cc: Takashi Iwai <> Cc: Alex Deucher <> Cc: Rafael J. Wysocki <> Reviewed-by: Peter Wu <> Tested-by: Kai Heng Feng <> # AMD PowerXpress Tested-by: Mike Lothian <> # AMD PowerXpress Tested-by: Denis Lisov <> # Nvidia Optimus Tested-by: Peter Wu <> # Nvidia Optimus Tested-by: Lukas Wunner <> # MacBook Pro Signed-off-by: Lukas Wunner <> Link:
2018-03-13vga_switcheroo: Update PCI current_state on power changeLukas Wunner1-0/+2
When cutting power to a GPU and its integrated HDA controller, their cached current_state should be updated to D3cold to reflect reality. We currently rely on the DRM and HDA drivers to do that, however: - The HDA driver updates the current_state in azx_vs_set_state(), which will no longer be called with driver power control once we migrate to device links. (It will still be called with manual power control.) - If the HDA device is not bound, its current_state remains at D0 even though the GPU driver may decide to go to D3cold. - The DRM drivers update the current_state using pci_set_power_state() which can't put the device into a deeper power state than D3hot if the GPU is not deemed power-manageable by the platform (even though it *is* power-manageable by some nonstandard means, such as a _DSM). Centralize updating the current_state of the GPU and HDA controller in vga_switcheroo's ->runtime_suspend hook to overcome these deficiencies. The GPU and HDA controller are two functions of the same PCI device (VGA class device on function 0 and audio device on function 1) and no other PCI devices reside on the same bus since this is a PCIe point-to-point link, so we can just walk the bus and update the current_state of all devices. On ->runtime_resume, the HDA controller is in D0uninitialized state. Resume to D0active and then let it autosuspend as it sees fit. Note that vga_switcheroo_init_domain_pm_ops() is not supposed to be called by hybrid graphics laptops which power down the GPU via its root port's _PR3 resources and consequently vga_switcheroo_runtime_suspend() is not used. On those laptops, the root port is power-manageable by the platform (instead of by a nonstandard means) and the current_state is therefore updated by the PCI core through the following call chain: pci_set_power_state() __pci_complete_power_transition() pci_bus_set_current_state() Resuming to D0active happens through: pci_set_power_state() __pci_start_power_transition() pci_wakeup_bus() Cc: Dave Airlie <> Cc: Ben Skeggs <> Cc: Takashi Iwai <> Cc: Alex Deucher <> Cc: Bjorn Helgaas <> Cc: Rafael J. Wysocki <> Reviewed-by: Peter Wu <> Tested-by: Kai Heng Feng <> # AMD PowerXpress Tested-by: Mike Lothian <> # AMD PowerXpress Tested-by: Denis Lisov <> # Nvidia Optimus Tested-by: Peter Wu <> # Nvidia Optimus Tested-by: Lukas Wunner <> # MacBook Pro Signed-off-by: Lukas Wunner <> Link:
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <> Signed-off-by: Linus Torvalds <>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <>
2017-10-18vgaarb: Factor out EFI and fallback default device selectionBjorn Helgaas1-22/+35
The default VGA device is normally set in vga_arbiter_add_pci_device() when we call it for the first enabled device that can be accessed with the legacy VGA resources ([mem 0xa0000-0xbffff], etc.) That default device can be overridden by an EFI device that owns the boot framebuffer. As a fallback, we can also select a VGA device that can't be accessed via legacy VGA resources, or a VGA device that isn't even enabled. Factor out this EFI and fallback selection from vga_arb_device_init() into a separate vga_arb_select_default_device() function. This doesn't change any behavior, but it untangles the "bridge control possible" checking and messages from the default device selection. Tested-by: Zhou Wang <> # D05 Hisi Hip07, Hip08 Signed-off-by: Bjorn Helgaas <> Acked-by: Ard Biesheuvel <> Reviewed-by: Daniel Axtens <> Signed-off-by: Daniel Vetter <> Link:
2017-10-18vgaarb: Select a default VGA device even if there's no legacy VGABjorn Helgaas1-0/+25
Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter never selects it as the default, which means Xorg auto-detection doesn't work. VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are not configurable by BARs. Consequently, multiple VGA devices can conflict with each other. The VGA arbiter avoids conflicts by ensuring that those legacy resources are only routed to one VGA device at a time. The arbiter identifies the "default VGA" device, i.e., a legacy VGA device that was used by boot firmware. It selects the first device that: - is of PCI_CLASS_DISPLAY_VGA, - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. Some systems don't have such a device. For example, if a host bridge doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any devices below it. Or, as on the HiSilicon D05, the VGA device may be behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the legacy VGA resources will never reach the device. This patch extends the arbiter so that if it doesn't find a device that meets all the above criteria, it selects the first device that: - is of PCI_CLASS_DISPLAY_VGA and - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled If it doesn't find even that, it selects the first device that: - is of class PCI_CLASS_DISPLAY_VGA. Such a device may not be able to use the legacy VGA resources, but most drivers can operate the device without those. Setting it as the default device means its "boot_vga" sysfs file will contain "1", which Xorg (via libpciaccess) uses to help select its default output device. This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in particular; see the link below). It also replaces the powerpc fixup_vga() quirk, albeit with slightly different semantics: the quirk selected the first VGA device we found, and overrode that selection with any enabled VGA device we found. If there were several enabled VGA devices, the *last* one we found would become the default. The code here instead selects the *first* enabled VGA device we find, and if none are enabled, the first VGA device we find. Link: Tested-by: Daniel Axtens <> # arm64, ppc64-qemu-tcg Tested-by: Zhou Wang <> # D05 Hisi Hip07, Hip08 Signed-off-by: Bjorn Helgaas <> Acked-by: Ard Biesheuvel <> Reviewed-by: Daniel Axtens <> Signed-off-by: Daniel Vetter <> Link:
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-1/+1
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <> Cc: Peter Zijlstra <> Cc: Thomas Gleixner <> Cc: Signed-off-by: Ingo Molnar <>
2017-03-07Merge tag 'drm-misc-next-2017-03-06' of ↵Dave Airlie1-13/+15
git:// into drm-next First slice of drm-misc-next for 4.12: Core/subsystem-wide: - link status core patch from Manasi, for signalling link train fail to userspace. I also had the i915 patch in here, but that had a small buglet in our CI, so reverted. - more debugfs_remove removal from Noralf, almost there now (Noralf said he'll try to follow up with the stragglers). - drm todo moved into kerneldoc, for better visibility (see Documentation/gpu/todo.rst), lots of starter tasks in there. - devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob Herring) - extended framebuffer fbdev support (for fbdev flipping), and vblank wait ioctl fbdev support (Maxime Ripard) - misc small things all over, as usual - add vblank callbacks to drm_crtc_funcs, plus make lots of good use of this to simplify drivers (Shawn Guo) - new atomic iterator macros to unconfuse old vs. new state Small drivers: - vc4 improvements from Eric - vc4 kerneldocs (Eric)! - tons of improvements for dw-mipi-dsi in rockchip from John Keeping and Chris Zhong. - MAINTAINERS entries for drivers managed in drm-misc. It's not yet official, still an experiment, but definitely not complete fail and better to avoid confusion. We kinda screwed that up with drm-misc a bit when we started committers last year. - qxl atomic conversion (Gabriel Krisman) - bunch of virtual driver polish (qxl, virgl, ...) - misc tiny patches all over This is the first time we've done the same merge-window blackout for drm-misc as we've done for drm-intel for ages, hence why we have a _lot_ of stuff queued already. But it's still only half of drm-intel (room to grow!), and the drivers in drm-misc experiment seems to work at least insofar as that you also get lots of driver updates here alredy. * tag 'drm-misc-next-2017-03-06' of git:// (141 commits) drm/vc4: Fix OOPSes from trying to cache a partially constructed BO. drm/vc4: Fulfill user BO creation requests from the kernel BO cache. Revert "drm/i915: Implement Link Rate fallback on Link training failure" drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC drm: Update drm_fbdev_cma_init documentation drm/rockchip/dsi: add dw-mipi power domain support drm/rockchip/dsi: fix insufficient bandwidth of some panel dt-bindings: add power domain node for dw-mipi-rockchip drm/rockchip/dsi: remove mode_valid function drm/rockchip/dsi: dw-mipi: correct the coding style drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi dt-bindings: add rk3399 support for dw-mipi-rockchip drm/rockchip: dw-mipi-dsi: add reset control drm/rockchip: dw-mipi-dsi: support non-burst modes drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded drm/rockchip: vop: test for P{H,V}SYNC drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC drm/rockchip: dw-mipi-dsi: use specific poll helper drm/rockchip: dw-mipi-dsi: improve PLL configuration drm/rockchip: dw-mipi-dsi: properly configure PHY timing ...
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <> Cc: Mike Galbraith <> Cc: Peter Zijlstra <> Cc: Thomas Gleixner <> Cc: Signed-off-by: Ingo Molnar <>
2017-03-01drivers:gpu: vga :vga_switcheroo.c : Fixed some coding style issuesJoan Jani1-13/+15
Fixed the following style issues drivers/gpu/vga/vga_switcheroo.c:98: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:99: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:102: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:103: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:129: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:135: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:217: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:218: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:308: WARNING: please, no space before tabs drivers/gpu/vga/vga_switcheroo.c:340: WARNING: line over 80 characters drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use * on subsequent lines drivers/gpu/vga/vga_switcheroo.c:1087: WARNING: Block comments use a trailing */ on a separate line Signed-off-by: Joan Jani <> Signed-off-by: Daniel Vetter <> Link:
2016-11-22vgaarb: use valid dev pointer in vgaarb_info()Arnd Bergmann1-2/+1
We now pass the device to the debug messages, but on non-x86, this is an invalid pointer in vga_arb_device_init: drivers/gpu/vga/vgaarb.c: In function 'vga_arb_device_init': drivers/gpu/vga/vgaarb.c:1467:4: error: 'dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This moves the initialization of the dev pointer outside of the architecture #ifdef. Fixes: a75d68f62106 ("vgaarb: Use dev_printk() when possible") Signed-off-by: Arnd Bergmann <> Signed-off-by: Daniel Vetter <> Link:
2016-11-18vgaarb: Downgrade userspace-triggerable messages to debugBjorn Helgaas1-5/+5
To avoid userspace-triggerable dmesg spam, downgrade messages in the sysfs write parsing code to debug level. Signed-off-by: Bjorn Helgaas <> Signed-off-by: Daniel Vetter <> Link:
2016-11-18vgaarb: Use dev_printk() when possibleBjorn Helgaas1-31/+35
Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. This changes messages like this: vgaarb: failed to allocate pci device vgaarb: setting as boot device: PCI:0000:01:00.0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: bridge control possible 0000:01:00.0 to this: pci 0000:01:00.0: vgaarb: failed to allocate VGA arbiter data pci 0000:01:00.0: vgaarb: setting as boot VGA device pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:01:00.0: vgaarb: bridge control possible No functional change intended. Signed-off-by: Bjorn Helgaas <> Signed-off-by: Daniel Vetter <> Link:
2016-10-17drivers/gpu/vga: allocate vga_arb_write() buffer on stackDmitry Vyukov1-11/+4
Size of kmalloc() in vga_arb_write() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Allocate the buffer on stack to avoid the WARNING. The string must be small (e.g "target PCI:domain:bus:dev.fn"). Signed-off-by: Dmitry Vyukov <> Reviewed-by: Ville Syrjälä <> Cc: Dave Airlie <> Cc: Ville Syrjälä <> Cc: Cc: Signed-off-by: Daniel Vetter <> Link:
2016-08-16vgaarbiter: rst-ifiy and polish kerneldocDaniel Vetter1-2/+108
Move the documentation into Documentation/gpu, link it up and pull in the kernel doc. No actual text changes except that I did polish the kerneldoc a bit, especially for vga_client_register(). v2: Remove some rst from vga-switcheroo.rst that I don't understand, but which seems to be the reason why the new vgaarbiter.rst sometimes drops out of the sidebar index. v3: Drop one level of headings and clarify the vgaarb one a bit. v4: Fix some typos (Sean). Cc: Jonathan Corbet <> Cc: Cc: Sean Paul <> Reviewed-by: Sean Paul <> Signed-off-by: Daniel Vetter <> Link:
2016-07-12vga_switcheroo: Sphinxify docsLukas Wunner1-14/+14
Fix up formatting glitches remaining after the automatic rst conversion. Cc: Jonathan Corbet <> Cc: Jani Nikula <> Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <> Link:
2016-05-31vga_switcheroo: Support deferred probing of audio clientsLukas Wunner1-8/+11
Daniel Vetter pointed out that vga_switcheroo_client_probe_defer() could be needed by audio clients as well. To avoid mistakes when someone adds conditions for these in the future, constrain the single existing condition to VGA clients by checking for PCI_BASE_CLASS_DISPLAY. This encompasses both PCI_CLASS_DISPLAY_VGA as well as PCI_CLASS_DISPLAY_3D, which is used by some Nvidia Optimus GPUs. Any future checks for audio clients should then be constrained to PCI_BASE_CLASS_MULTIMEDIA. v6: Spun out from commit introducing vga_switcheroo_client_probe_defer() to keep it a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <> Cc: Emil Velikov <> Cc: Jani Nikula <> Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <> Link:
2016-05-31vga_switcheroo: Add helper for deferred probingLukas Wunner1-1/+28
So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <> Cc: Ben Skeggs <> Cc: Alex Deucher <> Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <> Link:
2016-02-09vga_switcheroo: Add support for switching only the DDCLukas Wunner1-2/+95
Originally by Seth Forshee <>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: Bugzilla: Tested-by: Lukas Wunner <> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <> Cc: Dave Airlie <> Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <> Link:
2016-02-09vga_switcheroo: Add handler flags infrastructureLukas Wunner1-1/+21
Allow handlers to declare their capabilities and allow clients to obtain that information. So far we have these use cases: * If the handler is able to switch DDC separately, clients need to probe EDID with drm_get_edid_switcheroo(). We should allow them to detect a capable handler to ensure this function only gets called when needed. * Likewise if the handler is unable to switch AUX separately, the active client needs to communicate link training parameters to the inactive client, which may then skip the AUX handshake and set up its output with these pre-calibrated values (DisplayPort specification v1.1a, section Clients need a way to recognize such a situation. The flags for the radeon_atpx_handler and amdgpu_atpx_handler are initially set to 0, this can later on be amended with handler_flags |= VGA_SWITCHEROO_CAN_SWITCH_DDC; when a ->switch_ddc callback is added. Bugzilla: Bugzilla: Tested-by: Lukas Wunner <> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <> Reviewed-by: Darren Hart <> Signed-off-by: Daniel Vetter <> Link:
2016-01-20Merge tag 'pm+acpi-4.5-rc1-2' of ↵Linus Torvalds1-5/+6
git:// Pull more power management and ACPI updates from Rafael Wysocki: "This includes fixes on top of the previous batch of PM+ACPI updates and some new material as well. From the new material perspective the most significant are the driver core changes that should allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand. Apart from that, ACPICA is updated to upstream revision 20160108 (cosmetic mostly, but including one fixup on top of the previous ACPICA update) and there are some devfreq updates the didn't make it before (due to timing). A few recent regressions are fixed, most importantly in the cpuidle menu governor and in the ACPI backlight driver and some x86 platform drivers depending on it. Some more bugs are fixed and cleanups are made on top of that. Specifics: - Modify the driver core and the USB subsystem to allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand and fix some bugs on top of these changes (Tomeu Vizoso, Rafael Wysocki). - Update ACPICA to upstream revision 20160108, including updates of the ACPICA's copyright notices, a code fixup resulting from a regression fix that was necessary in the upstream code only (the regression fixed by it has never been present in Linux) and a compiler warning fix (Bob Moore, Lv Zheng). - Fix a recent regression in the cpuidle menu governor that broke it on practically all architectures other than x86 and make a couple of optimizations on top of that fix (Rafael Wysocki). - Clean up the selection of cpuidle governors depending on whether or not the kernel is configured for tickless systems (Jean Delvare). - Revert a recent commit that introduced a regression in the ACPI backlight driver, address the problem it attempted to fix in a different way and revert one more cosmetic change depending on the problematic commit (Hans de Goede). - Add two more ACPI backlight quirks (Hans de Goede). - Fix a few minor problems in the core devfreq code, clean it up a bit and update the MAINTAINERS information related to it (Chanwoo Choi, MyungJoo Ham). - Improve an error message in the ACPI fan driver (Andy Lutomirski). - Fix a recent build regression in the cpupower tool (Shreyas Prabhu)" * tag 'pm+acpi-4.5-rc1-2' of git:// (32 commits) cpuidle: menu: Avoid pointless checks in menu_select() sched / idle: Drop default_idle_call() fallback from call_cpuidle() cpupower: Fix build error in cpufreq-info cpuidle: Don't enable all governors by default cpuidle: Default to ladder governor on ticking systems time: nohz: Expose tick_nohz_enabled ACPICA: Update version to 20160108 ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t' ACPICA: Additional 2016 copyright changes ACPICA: Reduce regression fix divergence from upstream ACPICA ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830 ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()" ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses() ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses" ACPI / fan: Improve acpi_device_update_power error message ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700 cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0 MAINTAINERS: Add devfreq-event entry MAINTAINERS: Add missing git repository and directory for devfreq ...
2016-01-21Merge branch 'pm-core'Rafael J. Wysocki1-5/+6
* pm-core: driver core: Avoid NULL pointer dereferences in device_is_bound() platform: Do not detach from PM domains on shutdown USB / PM: Allow USB devices to remain runtime-suspended when sleeping PM / sleep: Go direct_complete if driver has no callbacks PM / Domains: add setter for dev.pm_domain device core: add device_is_bound()
2016-01-17Merge branch 'drm-next' of git:// Torvalds1-1/+1
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.5. I don't think I've missed anything too major, I'm mostly back at work now but I'll probably get some sleep in 5 years time. Summary: New drivers: - etnaviv: GPU driver for the 3D core on the Vivante core used in numerous ARM boards. Highlights: Core: - Atomic suspend/resume helpers - Move the headers to using userspace friendlier types. - Documentation updates - Lots of struct_mutex removal. - Bunch of DP MST fixes from AMD. Panel: - More DSI helpers - Support for some new basic panels i915: - Basic Kabylake support - DP link training and detect code refactoring - fbc/psr fixes - FIFO underrun fixes - SDE interrupt handling fixes - dma-buf/fence support in pageflip path. - GPU side for MST audio support radeon/amdgpu: - Drop UMS support - GPUVM/Scheduler optimisations - Initial Powerplay support for Tonga/Fiji/CZ/ST - ACP audio prerequisites nouveau: - GK20a instmem improvements - PCIE link speed change support msm: - DSI support for msm8960/apq8064 tegra: - Host1X support for Tegra210 SoC vc4: - 3D acceleration support armada: - Get rid of struct mutex tda998x: - Atomic modesetting support - TMDS clock limitations omapdrm: - Atomic modesetting support - improved TILER performance rockchip: - RK3036 VOP support - Atomic modesetting support - Synopsys DW MIPI DSI support exynos: - Runtime PM support - of_graph binding for DP panels - Cleanup of IPP code - Configurable plane support - Kernel panic fixes at release time" * 'drm-next' of git:// (711 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/amdgpu: add missing irq.h include drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates drm/vmwgfx: Fix an incorrect lock check drm: nouveau: fix nouveau_debugfs_init prototype drm/nouveau/pci: fix check in nvkm_pcie_set_link drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/sysfs: use kobj_to_dev() ...
2016-01-18Merge tag 'topic/drm-misc-2016-01-17' of ↵Dave Airlie1-1/+1
git:// into drm-next Since your main drm-next pull isn't out of the door yet I figured I might as well flush out drm-misc instead of delaying for 4.6. It's really just random stuff all over, biggest thing probably connector_mask tracking from Maarten. * tag 'topic/drm-misc-2016-01-17' of git:// (24 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/sysfs: use kobj_to_dev() drm/i915: Init power domains early in driver load drm: Do not set connector->encoder in drivers apple-gmux: Add initial documentation drm: move MODULE_PARM_DESC to other file drm/edid: index CEA/HDMI mode tables using the VIC drm/atomic: Remove drm_atomic_connectors_for_crtc. drm/i915: Update connector_mask during readout, v2. drm: Remove opencoded drm_gem_object_release_handle() drm: Do not set outparam on error during GEM handle allocation drm/docs: more leftovers from the big vtable documentation pile drm/atomic-helper: Reject legacy flips on a disabled pipe drm/atomic: add connector mask to drm_crtc_state. drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2. drm/atomic: Add __drm_atomic_helper_connector_reset, v2. drm/i915: Set connector_state->connector using the helper. drm: Use a normal idr allocation for the obj->name drm: Only bump object-reference count when adding first handle drm: Balance error path for GEM handle allocation ...
2016-01-08PM / Domains: add setter for dev.pm_domainTomeu Vizoso1-5/+6
Adds a function that sets the pointer to dev_pm_domain in struct device and that warns if the device has already finished probing. The reason why we want to enforce that is because in the general case that can cause problems and also that we can simplify code quite a bit if we can always assume that. This patch also changes all current code that directly sets the dev.pm_domain pointer. Signed-off-by: Tomeu Vizoso <> Reviewed-by: Ulf Hansson <> Signed-off-by: Rafael J. Wysocki <>
2016-01-04Merge branch 'memdup_user_nul' into work.miscAl Viro1-2/+4
2016-01-04vga_switcheroo: Prettify documentationLukas Wunner1-1/+1
Fix indentation of vga_switcheroo sections in gpu.tmpl. Change section type of API documentation from "chapter" to "sect1" so that the individual functions no longer clutter up the ToC. Group together under a new "API" chapter. Fix wording "heretoforth" -> "henceforth". Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <>
2015-12-11vgaarb: fix signal handling in vga_get()Kirill A. Shutemov1-2/+4
There are few defects in vga_get() related to signal hadning: - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE case; - if we found pending signal we must remove ourself from wait queue and change task state back to running; - -ERESTARTSYS is more appropriate, I guess. Signed-off-by: Kirill A. Shutemov <> Cc: Reviewed-by: David Herrmann <> Signed-off-by: Dave Airlie <>
2015-12-06vgaarb: remove bogus checksAl Viro1-7/+0
neither ->release() nor ->poll() can be called unless ->open() has succeeded on the same struct file, so checking for "has open() failed" is pointless. What's more, ->poll() doesn't return -E... - it always returns a bitmap of POLL... values, so the dead code in that one had been actively bogus. Signed-off-by: Al Viro <>
2015-11-05vga_switcheroo: Drop client power state VGA_SWITCHEROO_INITLukas Wunner1-2/+0
hda_intel.c:azx_probe() defers initialization of an audio controller on the discrete GPU if the GPU is powered off. The power state of the GPU is determined by calling vga_switcheroo_get_client_state(). vga_switcheroo_get_client_state() returns VGA_SWITCHEROO_INIT if vga_switcheroo is not enabled, i.e. if no second GPU or no handler has registered. This can go wrong in the following scenario: - Driver for the integrated GPU is not loaded. - Driver for the discrete GPU registers with vga_switcheroo, uses driver power control to power down the GPU, handler cuts power to the GPU. - Driver for the audio controller gets loaded after the GPU was powered down, calls vga_switcheroo_get_client_state() which returns VGA_SWITCHEROO_INIT instead of VGA_SWITCHEROO_OFF. - Consequence: azx_probe() tries to initialize the audio controller even though the GPU is powered down. The power state VGA_SWITCHEROO_INIT was introduced by c8e9cf7bb240 ("vga_switcheroo: Add a helper function to get the client state"). It is not apparent what its benefit might be. The idea seems to be to initialize the audio controller even if the power state is VGA_SWITCHEROO_OFF (were vga_switcheroo enabled), but as shown above this can fail. Drop VGA_SWITCHEROO_INIT to solve this. Acked-by: Takashi Iwai <> Signed-off-by: Lukas Wunner <> Signed-off-by: Dave Airlie <>
2015-10-20vga_switcheroo: Constify vga_switcheroo_handlerLukas Wunner1-2/+2
vga_switcheroo_client_ops has always been declared const since its introduction with 26ec685ff9d9 ("vga_switcheroo: Introduce struct vga_switcheroo_client_ops"). Do so for vga_switcheroo_handler as well. drivers/gpu/drm/amd/amdgpu/amdgpu.ko: 6 .rodata 00009888 - 19 .data 00001f00 + 19 .data 00001ee0 drivers/gpu/drm/nouveau/nouveau.ko: 6 .rodata 000460b8 17 .data 00018fe0 drivers/gpu/drm/radeon/radeon.ko: - 7 .rodata 00030944 + 7 .rodata 00030964 - 21 .data 0000d6a0 + 21 .data 0000d678 drivers/platform/x86/apple-gmux.ko: - 7 .rodata 00000140 + 7 .rodata 00000160 - 11 .data 000000e0 + 11 .data 000000b8 Cc: Ben Skeggs <> Cc: Darren Hart <> Cc: Alex Deucher <> Signed-off-by: Lukas Wunner <> Reviewed-by: Christian König <>. Signed-off-by: Daniel Vetter <>
2015-10-16vga_switcheroo: Use enum vga_switcheroo_client_id instead of intLukas Wunner1-7/+10
Signed-off-by: Lukas Wunner <> Reviewed-by: Alex Deucher <> Signed-off-by: Daniel Vetter <>
2015-10-16vga_switcheroo: Use VGA_SWITCHEROO_UNKNOWN_ID instead of -1Lukas Wunner1-8/+9
Signed-off-by: Lukas Wunner <> Reviewed-by: Alex Deucher <> Signed-off-by: Daniel Vetter <>
2015-10-16vga_switcheroo: Use enum vga_switcheroo_state instead of intLukas Wunner1-3/+3
Signed-off-by: Lukas Wunner <> Reviewed-by: Jani Nikula <> Reviewed-by: Alex Deucher <> Signed-off-by: Daniel Vetter <>
2015-10-02vga_switcheroo: Add missing lockingLukas Wunner1-18/+32
The following functions iterate over the client list, invoke client callbacks or invoke handler callbacks without locking anything at all: - Introduced by c8e9cf7bb240 ("vga_switcheroo: Add a helper function to get the client state"): vga_switcheroo_get_client_state() - Introduced by 0d69704ae348 ("gpu/vga_switcheroo: add driver control power feature. (v3)"): vga_switcheroo_set_dynamic_switch() vga_switcheroo_runtime_suspend() vga_switcheroo_runtime_resume() vga_switcheroo_runtime_resume_hdmi_audio() Refactor vga_switcheroo_runtime_resume_hdmi_audio() a bit to be able to release vgasr_mutex immediately after iterating over the client list. Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <>
2015-10-01vgaarb: use kzalloc in vga_arbiter_add_pci_device()Rasmus Villemoes1-3/+1
Signed-off-by: Rasmus Villemoes <> Reviewed-by: Jani Nikula <> Signed-off-by: Daniel Vetter <>
2015-09-24vga_switcheroo: Set active attribute to false for audio clientsLukas Wunner1-4/+3
The active attribute in struct vga_switcheroo_client denotes whether the outputs are currently switched to this client. The attribute is only meaningful for vga clients. It is never used for audio clients. The function vga_switcheroo_register_audio_client() misuses this attribute to store whether the audio device is fully initialized. Most likely there was a misunderstanding about the meaning of "active" when this was added. Comment from Takashi's review: "Not really. The full initialization of audio was meant that the audio is active indeed. Admittedly, though, the active flag for each audio client doesn't play any role because the audio always follows the gfx state changes, and the value passed there doesn't reflect the actual state due to the later change. So, I agree with the removal of the flag itself -- or let the audio active flag following the corresponding gfx flag. The latter will make the proc output more consistent while the former is certainly more reduction of code." Set the active attribute to false for audio clients. Remove the active parameter from vga_switcheroo_register_audio_client() and its sole caller, hda_intel.c:register_vga_switcheroo(). vga_switcheroo_register_audio_client() was introduced by 3e9e63dbd374 ("vga_switcheroo: Add the support for audio clients"). Its use in hda_intel.c was introduced by a82d51ed24bb ("ALSA: hda - Support VGA-switcheroo"). v1.1: The changes above imply that in find_active_client() the call to client_is_vga() is now superfluous. Drop it. Cc: Takashi Iwai <> Signed-off-by: Lukas Wunner <> [danvet: Add Takashi's clarification to the commit message.] Reviewed-by: Takashi Iwai <> Signed-off-by: Daniel Vetter <>
2015-09-24vga_switcheroo: Sort headers alphabeticallyLukas Wunner1-8/+6
Signed-off-by: Lukas Wunner <> Signed-off-by: Daniel Vetter <>