summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)AuthorFilesLines
2019-09-03drm/msm/dsi: Fix return value check for clk_get_parentSean Paul1-4/+4
clk_get_parent returns an error pointer upon failure, not NULL. So the checks as they exist won't catch a failure. This patch changes the checks and the return values to properly handle an error pointer. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Rob Clark <robdclark@chromium.org> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: add atomic tracesRob Clark5-4/+136
This was useful for debugging fps drops. I suspect it will be useful again. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm/dpu: async commit supportRob Clark6-45/+34
In addition, moving to kms->flush_commit() lets us drop the only user of kms->commit(). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: async commit supportRob Clark4-1/+210
Now that flush/wait/complete is decoupled from the "synchronous" part of atomic commit_tail(), add support to defer flush to a timer that expires shortly before vblank for async commits. In this way, multiple atomic commits (for example, cursor updates) can be coalesced into a single flush at the end of the frame. v2: don't hold lock over ->wait_flush(), to avoid locking interaction that was causing fps drop when combining page flips or non-async atomic commits and lots of legacy cursor updates Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: split power control from prepare/complete_commitRob Clark5-14/+54
With atomic commit, ->prepare_commit() and ->complete_commit() may not be evenly balanced (although ->complete_commit() will complete each crtc that had been previously prepared). So these will no longer be a good place to enable/disable clocks needed for hw access. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: add kms->flush_commit()Rob Clark5-4/+63
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends should migrate writing flush registers to this hook, so we can decouple pushing updates to hardware, and flushing the updates. Once we add async commit support, the hw updates will be pushed down to the hw synchronously, but flushing the updates will be deferred until as close to vblank as possible, so that multiple updates can be combined in a single frame. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: convert kms->complete_commit() to crtc_maskRob Clark7-36/+11
Prep work for async commits, in which case this will be called after we no longer have the atomic state object. This drops some wait_for_vblanks(), but those should be unnecessary, as we call this after waiting for flush to complete. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
2019-09-03drm/msm: add kms->wait_flush()Rob Clark5-42/+54
First step in re-working the atomic related internal API to prepare for async updates pending.. ->wait_flush() is intended to block until there is no in-progress flush. A crtc_mask is used, rather than an atomic state object, as this will later be used for async flush after the atomic state is destroyed. This replaces ->wait_for_crtc_commit_done() v2: update for review comments Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: handle_frame_done() from vblank irqRob Clark2-23/+9
Previously the callback was called from whoever called wait_for_vblank(), but that isn't a great plan when wait_for_vblank() stops getting called, and results in frame_done_timer expiring. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: add real wait_for_commit_done()Rob Clark1-1/+21
Just waiting for next vblank isn't ideal.. we should really be looking at the hw FLUSH register value to know if there is still an in-progress flush without stalling unnecessarily when there is no pending flush. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: unwind async commit handlingRob Clark6-57/+37
It attempted to avoid fps drops in the presence of cursor updates. But it is racing, and can result in hw updates after flush before vblank, which leads to underruns. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: remove unused argRob Clark3-4/+3
Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: remove some impossible error checkingRob Clark6-45/+0
I'm sure there is plenty more to remove.. this is just some of the ones I noticed. Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: add rotation propertyRob Clark1-0/+20
Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: Remove Kconfig defaultJordan Crouse1-1/+1
Remove the default for CONFIG_DRM_MSM and let the user select the driver manually as one does. Additionally select QCOM_COMMAND_DB for ARCH_QCOM targets to make sure it doesn't get missed when we need it for a6xx targets. v2: Move from default 'm' to no default Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: remove stray "\n"Rob Clark1-1/+1
The extra line-break in traces was annoying me. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: fix "frame done" timeoutsRob Clark4-33/+38
Previously, dpu_crtc_frame_event_work() would try to aquire all the modeset locks in order to check whether it can release bandwidth. (If we only have cmd-mode display, bandwidth can be released at frame-done time.) The problem with this is that it is also responsible for signalling frame_done_comp, which dpu_crtc_commit_kickoff() waits on if there is already a frame pending. This is called in the msm_atomic_commit_tail() path.. which means that for non-nonblock commits, at least some of the modeset locks are already held. Re-work this scheme to use a reference count to track our need to have clocks enabled. It is incremented for each atomic commit, and decremented in the corresponding frame-done. Additionally, any crtc used in video mode hold an extra reference while they are enabled. The net effect is that we can determine in frame-done whether it is safe to drop bandwidth without needing to aquire any modeset locks. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: Use struct_size() helperGustavo A. R. Silva1-2/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct msm_gem_submit { ... struct { ... } bos[0]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*submit) + ((u64)nr_bos * sizeof(submit->bos[0])) with: struct_size(submit, bos, nr_bos) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: Use generic bulk clock functionJordan Crouse4-43/+2
Remove the homebrewed bulk clock get function and replace it with devm_clk_bulk_get_all(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/mdp5: Find correct node for creating gem address spaceJeffrey Hugo1-1/+6
Creating the msm gem address space requires a reference to the dev where the iommu is located. The driver currently assumes this is the same as the platform device, which breaks when the iommu is outside of the platform device (ie in the parent). Default to using the platform device, but check to see if that has an iommu reference, and if not, use the parent device instead. This should handle all the various iommu designs for mdp5 supported systems. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/phy/dsi_phy: silence -EPROBE_DEFER warningsBrian Masney1-5/+7
The following errors show up when booting the Nexus 5: msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR* dsi_phy_regulator_init: failed to init regulator, ret=-517 msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR* dsi_phy_driver_probe: failed to init regulator dsi_phy_regulator_init() already logs the error, so no need to log the same error a second time in dsi_phy_driver_probe(). This patch also changes dsi_phy_regulator_init() to not log the error if the error code is -EPROBE_DEFER to reduce noise in dmesg. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [add some {}'s] Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/a6xx: add missing MODULE_FIRMWARE()Rob Clark1-0/+1
For platforms that require the "zap shader" to take the GPU out of secure mode at boot, we also need the zap fw to end up in the initrd. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/mdp5: Add msm8998 supportJeffrey Hugo1-5/+127
Add support for MDP5 version v3.0 found on msm8998. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> [silence unitialized variable warnings] Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: remove dpu_mdss:hwversionRob Clark1-5/+0
Unused and the extra rpm get/put interferes with handover from bootloader (ie. happens before we have a chance to check if things are already enabled). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: Transition console to msm framebufferJeffrey Hugo1-0/+3
If booting a device using EFI, efifb will likely come up and claim the console. When the msm display stack finally comes up, we want the console to move over to the msm fb, so add support to kick out any firmware based framebuffers to accomplish the console transition. Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/hdmi: Convert to use GPIO descriptorsLinus Walleij3-67/+45
This switches the MSM HDMI code to use GPIO descriptors. Normally we would fetch the GPIOs from the device with the flags GPIOD_IN or GPIOD_OUT_[LOW|HIGH] to set up the lines immediately, but since the code seems eager to actively drive the lines high/low when turning HDMI on and off, we just fetch the GPIOs as-is and keep the code explicitly driving them. The old code would try legacy bindings (GPIOs without any "-gpios" suffix) but this has been moved to the gpiolib as a quirk by the previous patch. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dpu: Drop unused GPIO codeLinus Walleij3-9/+5
The DPU has some kind of idea that it wants to be able to bring up power using GPIO lines. The struct dss_gpio is however completely unused and should this be done, it should be done using the GPIO descriptor framework rather than this API which relies on the global GPIO numberspace. Delete this code before anyone hurt themselves. The inclusion of <linux/gpio.h> was abused to get some OF and IRQ headers implicitly included into the DPU utilities, make these includes explicit and push them down into the actual implementation. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/dsi: Drop unused GPIO includesLinus Walleij1-2/+0
This DSI driver uses the new descriptor API so these old GPIO API includes are surplus. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm/mdp4: Drop unused GPIO includeLinus Walleij1-2/+0
This file is not using any symbols from <linux/gpio.h> so just drop this include. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-09-03drm/msm: drop use of drmP.hSam Ravnborg40-18/+99
Drop the deprecated drmP.h header file, and trim msm_drv.h to the relevant include files. This resulted in a suprisingly many edits as many files relied on headers included via msm_drv.h. But msm_drv.h is not supposed to carry include files it do not need, so the individual files have to include what extra they needs. v2: - Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Carsten Behling <carsten.behling@googlemail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Todor Tomov <todor.tomov@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
2019-08-21Merge tag 'drm-misc-next-2019-08-19' of ↵Dave Airlie3-11/+11
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: add reservation_object_fences helper, relax reservation_object_add_shared_fence, remove reservation_object seq number (and then restored) - dma-fence: Shrinkage of the dma_fence structure, Merge dma_fence_signal and dma_fence_signal_locked, Store the timestamp in struct dma_fence in a union with cb_list Driver Changes: - More dt-bindings YAML conversions - More removal of drmP.h includes - dw-hdmi: Support get_eld and various i2s improvements - gm12u320: Few fixes - meson: Global cleanup - panfrost: Few refactors, Support for GPU heap allocations - sun4i: Support for DDC enable GPIO - New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: fixup dma_resv rename fallout] From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea
2019-08-13dma-buf: rename reservation_object to dma_resvChristian König3-11/+11
Be more consistent with the naming of the other DMA-buf objects. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/323401/
2019-08-09Merge tag 'drm-misc-next-2019-08-08' of ↵Dave Airlie5-33/+19
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: - HDCP: Add a Content protection type property Cross-subsystem Changes: Core Changes: - Continue to rework the include dependencies - fb: Remove the unused drm_gem_fbdev_fb_create function - drm-dp-helper: Make the link rate calculation more tolerant to non-explicitly defined, yet supported, rates - fb-helper: Map DRM client buffer only when required, and instanciate a shadow buffer when the device has a dirty function or says so - connector: Add a helper to link the DDC adapter used by that connector to the userspace - vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout - dma-buf: Fix a stack corruption - ttm: Embed a drm_gem_object struct to make ttm_buffer_object a superclass of GEM, and convert drivers to use it. - hdcp: Improvements to report the content protection type to the userspace Driver Changes: - Remove drm_gem_prime_import/export from being defined in the drivers - Drop DRM_AUTH usage from drivers - Continue to drop drmP.h - Convert drivers to the connector ddc helper - ingenic: Add support for more panel-related cases - komeda: Support for dual-link - lima: Reduce logging - mpag200: Fix the cursor support - panfrost: Export GPU features register to userspace through an ioctl - pl111: Remove the CLD pads wiring support from the DT - rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET macro - sun4i: Improve support for color encoding and range - tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny - vkms: Rework of the CRC tracking - bridges: - sii902x: Add support for audio graph card - tc358767: Rework AUX data handling code - ti-sn65dsi86: Add Debugfs and proper DSI mode flags support - panels - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - Conversion of the device tree bindings to the YAML description - jh057n00900: Rework the enable / disable path - fbdev: - ssd1307fb: Support more devices based on that controller Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
2019-08-07drm/msm: drop DRM_AUTH usage from the driverEmil Velikov1-11/+11
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: freedreno@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-7-emil.l.velikov@gmail.com
2019-08-07Revert "drm/msm: drop DRM_AUTH usage from the driver"Sean Paul1-11/+11
This reverts commit 88209d2c5035737f96bcfc2fd73c0fd8d80e9bf1. Mandatory review was missing from this patch. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190807142101.251400-5-sean@poorly.run
2019-08-01drm: msm: Fix add_gpu_componentsJeffrey Hugo1-1/+2
add_gpu_components() adds found GPU nodes from the DT to the match list, regardless of the status of the nodes. This is a problem, because if the nodes are disabled, they should not be on the match list because they will not be matched. This prevents display from initing if a GPU node is defined, but it's status is disabled. Fix this by checking the node's status before adding it to the match list. Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding) Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com
2019-08-01drm/msm: Annotate intentional switch statement fall throughsJordan Crouse3-0/+4
Explicitly mark intentional fall throughs in switch statements to keep -Wimplicit-fallthrough from complaining. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1564073588-27386-1-git-send-email-jcrouse@codeaurora.org
2019-08-01drm/msm: add support for per-CRTC max_vblank_count on mdp5Brian Masney2-2/+16
The mdp5 drm/kms driver currently does not work on command-mode DSI panels due to 'vblank wait timed out' errors. This causes a latency of seconds, or tens of seconds in some cases, before content is shown on the panel. This hardware does not have the something that we can use as a frame counter available when running in command mode, so we need to fall back to using timestamps by setting the max_vblank_count to zero. This can be done on a per-CRTC basis, so the convert mdp5 to use drm_crtc_set_max_vblank_count(). This change was tested on a LG Nexus 5 (hammerhead) phone. Suggested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531094619.31704-3-masneyb@onstation.org
2019-07-31drm/msm: Use the correct dma_sync calls in msm_gemRob Clark1-5/+42
[subject was: drm/msm: shake fist angrily at dma-mapping] So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss). Fixes this splat on mdp5 devices: Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x96000144 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000144 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000 [ffffffff80000000] pgd=0000000000000000 Internal error: Oops: 96000144 [#1] SMP Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1 Hardware name: Samsung Galaxy A5U (EUR) (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __clean_dcache_area_poc+0x20/0x38 lr : arch_sync_dma_for_device+0x28/0x30 sp : ffff0000115736a0 x29: ffff0000115736a0 x28: 0000000000000001 x27: ffff800074830800 x26: ffff000011478000 x25: 0000000000000000 x24: 0000000000000001 x23: ffff000011478a98 x22: ffff800009fd1c10 x21: 0000000000000001 x20: ffff800075ad0a00 x19: 0000000000000000 x18: ffff0000112b2000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fffffff0 x14: ffff000011455d70 x13: 0000000000000000 x12: 0000000000000028 x11: 0000000000000001 x10: ffff00001106c000 x9 : ffff7e0001d6b380 x8 : 0000000000001000 x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382 x5 : 0000000000000000 x4 : 0000000000001000 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffff80001000 x0 : ffffffff80000000 Call trace: __clean_dcache_area_poc+0x20/0x38 dma_direct_sync_sg_for_device+0xb8/0xe8 get_pages+0x22c/0x250 [msm] msm_gem_get_and_pin_iova+0xdc/0x168 [msm] ... Fixes the combination of two patches: Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Rob Clark <robdclark@chromium.org> [seanpaul changed subject to something more desriptive] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
2019-07-25drm: Switch to use DEVFREQ_GOV_SIMPLE_ONDEMAND constantYue Hu1-1/+2
Since governor name is defined by DEVFREQ framework internally, use the macro definition instead of using the name directly. Signed-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Jordan Crouse <jcrouse@codeaurora.org> for the msm part. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190725035239.1192-1-zbestahu@gmail.com
2019-07-22Merge v5.3-rc1 into drm-misc-nextMaxime Ripard99-1414/+777
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-22drm/msm: stop abusing dma_map/unmap for cacheRob Clark1-2/+2
Recently splats like this started showing up: WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0 Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-20190619+ #2317 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018 Workqueue: msm msm_gem_free_work [msm] pstate: 80c00005 (Nzcv daif +PAN +UAO) pc : __iommu_dma_unmap+0xb8/0xc0 lr : __iommu_dma_unmap+0x54/0xc0 sp : ffff0000119abce0 x29: ffff0000119abce0 x28: 0000000000000000 x27: ffff8001f9946648 x26: ffff8001ec271068 x25: 0000000000000000 x24: ffff8001ea3580a8 x23: ffff8001f95ba010 x22: ffff80018e83ba88 x21: ffff8001e548f000 x20: fffffffffffff000 x19: 0000000000001000 x18: 00000000c00001fe x17: 0000000000000000 x16: 0000000000000000 x15: ffff000015b70068 x14: 0000000000000005 x13: 0003142cc1be1768 x12: 0000000000000001 x11: ffff8001f6de9100 x10: 0000000000000009 x9 : ffff000015b78000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : fffffffffffff000 x5 : 0000000000000fff x4 : ffff00001065dbc8 x3 : 000000000000000d x2 : 0000000000001000 x1 : fffffffffffff000 x0 : 0000000000000000 Call trace: __iommu_dma_unmap+0xb8/0xc0 iommu_dma_unmap_sg+0x98/0xb8 put_pages+0x5c/0xf0 [msm] msm_gem_free_work+0x10c/0x150 [msm] process_one_work+0x1e0/0x330 worker_thread+0x40/0x438 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 ---[ end trace afc0dc5ab81a06bf ]--- Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint. Cc: Stephen Boyd <sboyd@kernel.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190630124735.27786-1-robdclark@gmail.com
2019-07-22drm/msm/dpu: Correct dpu encoder spinlock initializationShubhashree Dhar1-2/+1
dpu encoder spinlock should be initialized during dpu encoder init instead of dpu encoder setup which is part of modeset init. Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org> [seanpaul resolved conflict in old init removal and revised the commit message] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-dhar@codeaurora.org
2019-07-22drm/msm: correct NULL pointer dereference in context_initBrian Masney1-1/+1
Correct attempted NULL pointer dereference in context_init() when running without an IOMMU. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Brian Masney <masneyb@onstation.org> Fixes: 295b22ae596c ("drm/msm: Pass the MMU domain index in struct msm_file_private") Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190627020515.5660-1-masneyb@onstation.org
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds50-596/+750
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-28Merge tag 'drm-msm-next-2019-06-25' of ↵Dave Airlie48-538/+704
https://gitlab.freedesktop.org/drm/msm into drm-next + usual progress on cleanups + dsi vs EPROBE_DEFER fixes + msm8998 (snapdragon 835 support) + a540 gpu support (mesa support already landed) + dsi, dsi-phy support + mdp5 and dpu interconnect (bus/memory scaling) support + initial prep work for per-context pagetables (at least the parts that don't have external dependencies like iommu/arm-smmu) There is one more patch for fixing DSI cmd mode panels (part of a set of patches to get things working on nexus5), but it would be conflicty with 1cff7440a86e04a613665803b42034 in drm-next without rebasing or back-merge, and since it doesn't conflict with anything in msm-next, I think it best if Sean merges that through drm-mix-fixes instead. (In other news, I've been making some progress w/ getting efifb working properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff not totally falling over when bootloader enables display and things are already running when driver probes.. but not quite ready yet, hopefully we can post some of that for 5.4.. should help for both the sdm835 and sdm850 laptops.) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsj3N4XzDLSDoa+4RHZ9wXObYmhcep0M3LjnRg48BeLvg@mail.gmail.com
2019-06-28drm/msm: Use drm_gem_fb_prepare_fbDaniel Vetter2-12/+4
msm has switched over to drm_fb->obj[] a while ago already, so we can just use the helper. v2: Make it compile ... oops. Cc: Eric Anholt <eric@anholt.net> Cc: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Fritz Koenig <frkoenig@google.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20190625204208.5614-3-daniel.vetter@ffwll.ch
2019-06-26drm/msm: drop DRM_AUTH usage from the driverEmil Velikov1-11/+11
The authentication can be circumvented, by design, by using the render node. From the driver POV there is no distinction between primary and render nodes, thus we can drop the token. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: freedreno@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-7-emil.l.velikov@gmail.com
2019-06-25drm/msm: Drop robj from msm_gem_new_implDaniel Vetter1-6/+2
Only user was the prime import, and drm_prime.c takes care of that now. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-46-daniel.vetter@ffwll.ch
2019-06-25drm/msm: add dirty framebuffer helperBrian Masney4-0/+11
Use drm_atomic_helper_dirtyfb() as the dirty callback in the msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips() when the planes are initialized in mdp4, mdp5, and dpu1. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 10:49:21 +0000