summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dsi/dsi_manager.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-11drm/msm/dsi: remove msm_dsi::encoderDmitry Baryshkov1-5/+3
There is no need anymore to stop the drm_encoder instance in struct msm_dsi. Remove corresponding field. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/561697/ Link: https://lore.kernel.org/r/20231009205727.2781802-5-dmitry.baryshkov@linaro.org
2024-02-11drm/msm/dsi: stop calling set_split_displayDmitry Baryshkov1-35/+0
Since the commit 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual DSI mode"), the second DSI host in the bonded pair will not be associated with the encoder and will not get the bridges, thus making condition in msm_dsi_manager_set_split_display() always false. Technically that change broke bonded DSI support in the MDP5 driver. But since nobody complained in the last 5.5 years, it seems that nobody cares enough. Drop the msm_dsi_manager_set_split_display() completely and stop calling the set_split_display() KMS callback. Also remove the msm_dsi::external_bridge field which was only used by the mentioned function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/561695/ Link: https://lore.kernel.org/r/20231009205727.2781802-4-dmitry.baryshkov@linaro.org
2024-02-11drm/msm/dsi: drop msm_dsi_device_connected() functionDmitry Baryshkov1-5/+0
Since the commit 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") the DSI hosts are not bound through the component framework if the DSI driver wasn't attached to the DSI device connected to this host. Afterwards, if there is no bridge (including the panel bridge) created for the DSI device then devm_drm_of_get_bridge() will return an error, also making msm_dsi_manager_ext_bridge_init() and thus DSI modesetting init fail. This way there can be no 'unconnected' MSM DSI bridges. Remove the msm_dsi_device_connected() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/561692/ Link: https://lore.kernel.org/r/20231009205727.2781802-3-dmitry.baryshkov@linaro.org
2024-02-11drm/msm/dsi: do not store internal bridge pointerDmitry Baryshkov1-11/+8
Since the driver was switched to devm_drm_bridge_add(), there is no need anymore to store the created bridge instance in struct msm_dsi. Drop this field and pass data directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/561693/ Link: https://lore.kernel.org/r/20231009205727.2781802-2-dmitry.baryshkov@linaro.org
2023-10-12drm/msm/dsi: use correct lifetime device for devm_drm_bridge_addDmitry Baryshkov1-1/+1
The lifetime of the created drm_bridge is attached to the drm_device rather than the DSI's platform_device. Use correct lifetime for devm_drm_bridge_add() call. Fixes: 5f403fd7d5c2 ("drm/msm/dsi: switch to devm_drm_bridge_add()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562200/ Link: https://lore.kernel.org/r/20231011214705.375738-2-dmitry.baryshkov@linaro.org
2023-10-09drm/msm/dsi: switch to devm_drm_bridge_add()Dmitry Baryshkov1-20/+10
Make MSM DSI driver use devm_drm_bridge_add() instead of plain drm_bridge_add(). As the driver doesn't require any additional cleanup, stop adding created bridge to the priv->bridges array. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/561636/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-05-21drm/msm/dsi: More properly handle errors in regards to dsi_mgr_bridge_power_on()Douglas Anderson1-6/+26
In commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") the error handling with regards to dsi_mgr_bridge_power_on() got a bit worse. Specifically if we failed to power the bridge on then nothing would really notice. The modeset function couldn't return an error and thus we'd blindly go forward and try to do the pre-enable. In commit ec7981e6c614 ("drm/msm/dsi: don't powerup at modeset time for parade-ps8640") we added a special case to move the powerup back to pre-enable time for ps8640. When we did that, we didn't try to recover the old/better error handling just for ps8640. In the patch ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset") we've now moved the powering up back to exclusively being during pre-enable. That means we can add the better error handling back in, so let's do it. To do so we'll add a new function dsi_mgr_bridge_power_off() that's matches how errors were handled prior to commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time"). NOTE: Now that we have dsi_mgr_bridge_power_off(), it feels as if we should be calling it in dsi_mgr_bridge_post_disable(). That would make some sense, but doing so would change the current behavior and thus should be a separate patch. Specifically: * dsi_mgr_bridge_post_disable() always calls dsi_mgr_phy_disable() even in the slave-DSI case of bonded DSI. We'd need to add special handling for this if it's truly needed. * dsi_mgr_bridge_post_disable() calls msm_dsi_phy_pll_save_state() midway through the poweroff. * dsi_mgr_bridge_post_disable() has a different order of some of the poweroffs / IRQ disables. For now we'll leave dsi_mgr_bridge_post_disable() alone. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/521059/ Link: https://lore.kernel.org/r/20230131141756.RFT.v2.3.I3c87b53c4ab61a7d5e05f601a4eb44c7e3809a01@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-21drm/msm/dsi: Stop unconditionally powering up DSI hosts at modesetDouglas Anderson1-37/+1
In commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time"), we moved powering up DSI hosts to modeset time. This wasn't because it was an elegant design, but there were no better options. That commit actually ended up breaking ps8640, and thus was born commit ec7981e6c614 ("drm/msm/dsi: don't powerup at modeset time for parade-ps8640") as a temporary hack to un-break ps8640 by moving it to the old way of doing things. It turns out that ps8640 _really_ doesn't like its pre_enable() function to be called after dsi_mgr_bridge_power_on(). Specifically (from experimentation, not because I have any inside knowledge), it looks like the assertion of "RST#" in the ps8640 runtime resume handler seems like it's not allowed to happen after dsi_mgr_bridge_power_on() Recently, Dave Stevenson's series landed allowing bridges some control over pre_enable ordering. The meaty commit for our purposes is commit 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order"). As documented by that series, if a bridge doesn't set "pre_enable_prev_first" then we should use the old ordering. Now that we have the commit ("drm/bridge: tc358762: Set pre_enable_prev_first") we can go back to the old ordering, which also allows us to remove the ps8640 special case. One last note is that even without reverting commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time"), if you _just_ revert the ps8640 special case and try it out then it doesn't seem to fail anymore. I spent time bisecting / debugging this and it turns out to be mostly luck, so we still want this patch to make sure it's solid. Specifically the reason it sorta works these days is because we implemented wait_hpd_asserted() in ps8640 now, plus the magic of "pm_runtime" autosuspend. The fact that we have wait_hpd_asserted() implemented means that we actually power the bridge chip up just a wee bit earlier and then the bridge happens to stay on because of autosuspend and thus ends up powered before dsi_mgr_bridge_power_on(). Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/521058/ Link: https://lore.kernel.org/r/20230131141756.RFT.v2.2.I4cfeab9d0e07e98ead23dd0736ab4461e6c69002@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/dsi: properly handle the case of empty OPP table in ↵Dmitry Baryshkov1-9/+10
dsi_mgr_bridge_mode_valid It was left unnoticed during the review that even if there is no OPP table in device tree, one will be created by a call to the function devm_pm_opp_set_clkname(). This leads to dsi_mgr_bridge_mode_valid() rejecting all modes if DT contains no OPP table for the DSI host. Rework dsi_mgr_bridge_mode_valid() to handle this case by actually checking that the table is populated with frequency entries before returning an error. Fixes: 8328041b8c82 ("drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/520076/ Link: https://lore.kernel.org/r/20230124203600.3488766-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-22drm/msm/dsi: implement opp table based check for dsi_mgr_bridge_mode_valid()Abhinav Kumar1-0/+19
Currently there is no protection against a user trying to set an unsupported mode on DSI. Implement a check based on the opp table whether the byte clock for the mode can be supported by validating whether an opp table entry exists. For devices which have not added opp table support yet, skip this check otherwise it will break bootup on those devices. changes in v3: - make the comment shorter - handle all errors except ENODEV Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/15 Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/518008/ Link: https://lore.kernel.org/r/20230112001600.12791-2-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-09-18drm/msm/dsi: switch to DRM_PANEL_BRIDGEDmitry Baryshkov1-252/+31
Currently the DSI driver has two separate paths: one if the next device in a chain is a bridge and another one if the panel is connected directly to the DSI host. Simplify the code path by using panel-bridge driver (already selected in Kconfig) and dropping support for handling the panel directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493608/ Link: https://lore.kernel.org/r/20220712132258.671263-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Remove the unneeded result variableye xingchen1-4/+1
Return the value msm_dsi_phy_enable() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/499621/ Link: https://lore.kernel.org/r/20220826072821.253150-1-ye.xingchen@zte.com.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-05-20Merge tag 'msm-next-5.19-fixes' of ↵Dave Airlie1-1/+31
https://gitlab.freedesktop.org/abhinavk/msm into drm-next 5.19 fixes for msm-next - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com
2022-05-18drm/msm/dsi: don't powerup at modeset time for parade-ps8640Douglas Anderson1-1/+31
Commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") caused sc7180 Chromebooks that use the parade-ps8640 bridge chip to fail to turn the display back on after it turns off. Unfortunately, it doesn't look easy to fix the parade-ps8640 driver to handle the new power sequence. The Linux driver has almost nothing in it and most of the logic for this bridge chip is in black-box firmware that the bridge chip uses. Also unfortunately, reverting the patch will break "tc358762". The long term solution here is probably Dave Stevenson's series [1] that would give more flexibility. However, that is likely not a quick fix. For the short term, we'll look at the compatible of the next bridge in the chain and go back to the old way for the Parade PS8640 bridge chip. If it's found that other bridge chips also need this workaround then we can add them to the list or consider inverting the condition. However, the hope is that the framework will not take too much longer to land and we won't have to add anything other than ps8640 here. [1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220513131504.v5.1.Ia196e35ad985059e77b038a41662faae9e26f411@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-05-11Merge tag 'drm-msm-next-2022-05-09' of ↵Dave Airlie1-0/+15
https://gitlab.freedesktop.org/drm/msm into drm-next - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - Devfreq clamp_to_idle fix - DPU: DSC (Display Stream Compression) support - DPU: inline rotation support on SC7280 - DPU: update DP timings to follow vendor recommendations - DP, DPU: add support for wide bus (on newer chipsets) - DP: eDP support - Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master component - MDSS: optionally reset the IP block at the bootup to drop bootloader state - Properly register and unregister internal bridges in the DRM framework - Complete DPU IRQ cleanup - DP: conversion to use drm_bridge and drm_bridge_connector - eDP: drop old eDP parts again - DPU: writeback support - Misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
2022-04-26drm/msm/dsi: add mode valid callback for dsi_mgrVinod Koul1-0/+12
Add a mode valid callback for dsi_mgr for checking mode being valid in case of DSC. For DSC the height and width needs to be multiple of slice, so we check that here Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480930/ Link: https://lore.kernel.org/r/20220406094031.1027376-13-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: properly add and remove internal bridgesDmitry Baryshkov1-0/+3
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by the driver. This fixes the following warning. WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4 DEBUG_LOCKS_WARN_ON(lock->magic != lock) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xc8/0x1e8 __warn from warn_slowpath_fmt+0x78/0xa8 warn_slowpath_fmt from __mutex_lock+0x840/0x9f4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84 drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c mdp4_kms_init from msm_drm_bind+0x514/0x698 msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8 component_master_add_with_match from msm_pdev_probe+0x274/0x350 msm_pdev_probe from platform_probe+0x5c/0xbc platform_probe from really_probe.part.0+0x9c/0x290 really_probe.part.0 from __driver_probe_device+0xa8/0x13c __driver_probe_device from driver_probe_device+0x34/0x10c driver_probe_device from __driver_attach+0xbc/0x178 __driver_attach from bus_for_each_dev+0x74/0xc0 bus_for_each_dev from bus_add_driver+0x160/0x1e4 bus_add_driver from driver_register+0x88/0x118 driver_register from do_one_initcall+0x6c/0x334 do_one_initcall from kernel_init_freeable+0x1bc/0x220 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/481778/ Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-11drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()Stephen Boyd1-1/+1
The member 'msm_dsi->connector' isn't assigned until msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and how it assigns the return value). Therefore this pointer is going to be NULL here. Let's use 'connector' which is what was intended. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/478693/ Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-02-19Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov1-12/+31
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
2022-02-18drm/msm/dsi: move DSI host powerup to modeset timeDmitry Baryshkov1-12/+31
The DSI subsystem does not fully fall into the pre-enable/enable system of callbacks, since typically DSI device bridge drivers expect to be able to communicate with DSI devices at the pre-enable() callback. The reason is that for some DSI hosts enabling the video stream would prevent other drivers from sending DSI commands. For example see the panel-bridge driver, which does drm_panel_prepare() from the pre_enable() callback (which would be called before our pre_enable() callback, resulting in panel preparation failures as the link is not yet ready). Therewere several attempts to solve this issue, but currently the best approach is to power up the DSI link from the mode_set() callback, allowing next bridge/panel to use DSI transfers in the pre_enable() time. Follow this approach. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20211207222901.988484-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: reduce usage of round_pixclk callbackDmitry Baryshkov1-22/+0
The round_pixclk() callback returns different rate only on MDP4 in HDMI (DTV) case. Stop using this callback in other cases to simplify mode_valid callbacks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220106070656.482882-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2021-12-08drm/msm/dsi: fix initialization in the bonded DSI caseDmitry Baryshkov1-17/+0
Commit 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()") changed msm_dsi_modeset_init() to return an error code in case msm_dsi_manager_validate_current_config() returns false. However this is not an error case, but a slave DSI of the bonded DSI link. In this case msm_dsi_modeset_init() should return 0, but just skip connector and bridge initialization. To reduce possible confusion, drop the msm_dsi_manager_validate_current_config() function, and specif 'bonded && !master' condition directly in the msm_dsi_modeset_init(). Fixes: 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20211125180114.561278-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-06Merge remote-tracking branch 'drm/drm-next' into msm-next-stagingRob Clark1-3/+3
Backmerge drm-next to pull in: 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-28drm/msm/dsi: stop setting clock parents manuallyDmitry Baryshkov1-9/+2
There is no reason to set clock parents manually, use device tree to assign DSI/display clock parents to DSI PHY clocks. Dropping this manual setup allows us to drop repeating code and to move registration of hw clock providers to generic place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-28drm/msm/dsi: untangle cphy setting from the src pll settingDmitry Baryshkov1-0/+3
Move DPHY/CPHY setting from msm_dsi_host_set_src_pll() to new function msm_dsi_host_set_phy_mode(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-13/+53
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-10-27drm/msm/dsi: Adjust probe orderRob Clark1-3/+3
Switch to the documented order dsi-host vs bridge probe. Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-22-maxime@cerno.tech
2021-10-15drm/msm/dsi: do not enable irq handler before powering up the hostDmitry Baryshkov1-0/+16
The DSI host might be left in some state by the bootloader. If this state generates an IRQ, it might hang the system by holding the interrupt line before the driver sets up the DSI host to the known state. Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to it. Call enable/disable_irq after msm_dsi_host_power_on/_off() functions, so that we can be sure that the interrupt is delivered when the host is in the known state. It is not possible to defer the interrupt enablement to a later point, because drm_panel_prepare might need to communicate with the panel over the DSI link and that requires working interrupt. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Support NO_CONNECTOR bridgesRob Clark1-13/+37
For now, since we have a mix of bridges which support this flag, which which do *not* support this flag, or work both ways, try it once with NO_CONNECTOR and then fall back to the old way if that doesn't work. Eventually we can drop the fallback path. v2: Add missing drm_connector_attach_encoder() so display actually comes up when the bridge properly handles the NO_CONNECTOR flag Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210920225801.227211-2-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-10drm/msm/dsi: add continuous clock support for 7nm PHYDmitry Baryshkov1-2/+2
Unlike previous generations, 7nm PHYs are required to collaborate with the host for continuos clock mode. Add changes neccessary to enable continuous clock mode in the 7nm DSI PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org [Fix merge conflict, and $description typo] Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: stop calling set_encoder_mode callbackDmitry Baryshkov1-12/+0
None of the display drivers now implement set_encoder_mode callback. Stop calling it from the modeset init code. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-7-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add three helper functionsDmitry Baryshkov1-8/+11
Add three helper functions to be used by display drivers for setting up encoders. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-3-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: rename dual DSI to bonded DSIDmitry Baryshkov1-52/+51
We are preparing to support two independent DSI hosts in the DSI/DPU code. To remove possible confusion (as both configurations can be referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts driving single device, with clocks being locked) to "bonded DSI". Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [DB: add one extra hunk added by one previous patches] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add support for dsi test pattern generatorAbhinav Kumar1-0/+13
During board bringups its useful to have a DSI test pattern generator to isolate a DPU vs a DSI issue and focus on the relevant hardware block. To facilitate this, add an API which triggers the DSI controller test pattern. The expected output is a rectangular checkered pattern. This has been validated on a single DSI video mode panel by calling it right after drm_panel_enable() which is also the ideal location to use this as the DSI host and the panel have been initialized by then. Further validation on dual DSI and command mode panel is pending. If there are any fix ups needed for those, it shall be applied on top of this change. Changes in v2: - generate the new dsi.xml.h and update the bitfield names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: drop msm_dsi_phy_get_shared_timingsDmitry Baryshkov1-2/+1
Instead of fetching shared timing through an extra function call, get them directly from msm_dsi_phy_enable. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm/dsi: do not enable PHYs when called for the slave DSI interfaceDmitry Baryshkov1-4/+4
Move the call to dsi_mgr_phy_enable after checking whether the DSI interface is slave, so that PHY enablement happens together with the host enablement. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm/dsi: print error code when MIPI DSI host registration failsDmitry Baryshkov1-2/+2
In order to ease debugging of DSI host registration issues, print return code of dsi_mgr_setup_components(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm/dsi: stop passing src_pll_id to the phy_enable callDmitry Baryshkov1-6/+5
Phy driver already knows the source PLL id basing on the set usecase and the current PLL id. Stop passing it to the phy_enable call. As a reminder, dsi manager will always use DSI 0 as a clock master in a slave mode, so PLL 0 is always a clocksource for DSI 0 and it is always a clocksource for DSI 1 too unless DSI 1 is used in the standalone mode. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210331105735.3690009-25-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm/dsi: make save/restore_state phy-level functionsDmitry Baryshkov1-4/+2
Morph msm_dsi_pll_save/restore_state() into msm_dsi_phy_save/restore_state(), thus removing last bits of knowledge about msm_dsi_pll from dsi_manager. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-14-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm/dsi: push provided clocks handling into a generic codeDmitry Baryshkov1-10/+3
All MSM DSI PHYs provide two clocks: byte and pixel ones. Register/unregister provided clocks from the generic place, removing boilerplate code from all MSM DSI PHY drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> # on sc7180 lazor Link: https://lore.kernel.org/r/20210331105735.3690009-11-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-08-08drm: Remove unnecessary drm_panel_attach and drm_panel_detachJoe Perches1-1/+0
These functions are now empty and no longer useful so remove the functions and their uses. Signed-off-by: Joe Perches <joe@perches.com> Cc: Bernard Zhao <bernard@vivo.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org>, Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Icenowy Zheng <icenowy@aosc.io>, Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: dri-devel@lists.freedesktop.org, Cc: linux-kernel@vger.kernel.org Cc: opensource.kernel@vivo.com Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
2020-03-11Merge v5.6-rc5 into drm-nextDave Airlie1-1/+6
Requested my mripard for some misc patches that need this as a base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-02-26drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart1-2/+2
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-13drm/msm/dsi: save pll state before dsi host is powered offHarigovindan P1-0/+5
Save pll state before dsi host is powered off. Without this change some register values gets resetted. Signed-off-by: Harigovindan P <harigovi@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-02-11drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFIJohn Stultz1-1/+1
I was hitting kCFI crashes when building with clang, and after some digging finally narrowed it down to the dsi_mgr_connector_mode_valid() function being implemented as returning an int, instead of an enum drm_mode_status. This patch fixes it, and appeases the opaque word of the kCFI gods (seriously, clang inlining everything makes the kCFI backtraces only really rough estimates of where things went wrong). Thanks as always to Sami for his help narrowing this down. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Alistair Delva <adelva@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: freedreno@lists.freedesktop.org Cc: clang-built-linux@googlegroups.com Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-01-20Merge tag 'drm-msm-next-2020-01-14' of ↵Dave Airlie1-21/+41
https://gitlab.freedesktop.org/drm/msm into drm-next + sc7180 display + DSI support + a618 (sc7180) support + more UBWC (bandwidth compression) support + various cleanups to handle devices that use vs don't use zap fw, etc + usual random cleanups and fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvv03ifuP0tp7-dmqZtr1iS=s8Vc=az8BNGtEoSMD-dkw@mail.gmail.com
2020-01-02drm/msm/dsi: Delay drm_panel_enable() until dsi_mgr_bridge_enable()Stephan Gerhold1-21/+41
At the moment, the MSM DSI driver calls drm_panel_enable() rather early from the DSI bridge pre_enable() function. At this point, the encoder (e.g. MDP5) is not enabled, so we have not started transmitting video data. However, the drm_panel_funcs documentation states that enable() should be called on the panel *after* video data is being transmitted: The .prepare() function is typically called before the display controller starts to transmit video data. [...] After the display controller has started transmitting video data, it's safe to call the .enable() function. This will typically enable the backlight to make the image on screen visible. Calling drm_panel_enable() too early causes problems for some panels: The TFT LCD panel used in the Samsung Galaxy Tab A 9.7 (2015) (APQ8016) uses the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command to control backlight/brightness of the screen. The enable sequence is therefore: drm_panel_enable() drm_panel_funcs.enable(): backlight_enable() backlight_ops.update_status(): mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness); The panel seems to silently ignore the MIPI_DCS_SET_DISPLAY_BRIGHTNESS command if it is sent too early. This prevents setting the initial brightness, causing the display to be enabled with minimum brightness instead. Adding various delays in the panel initialization code does not result in any difference. On the other hand, moving drm_panel_enable() to dsi_mgr_bridge_enable() fixes the problem, indicating that the panel requires the video stream to be active before the brightness command is accepted. Therefore: Move drm_panel_enable() to dsi_mgr_bridge_enable() to delay calling it until video data is being transmitted. Move drm_panel_disable() to dsi_mgr_bridge_disable() for similar reasons. (This is not strictly required for the panel affected above...) Tested-by: Jasper Korten <jja2000@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-12-09drm/panel: decouple connector from drm_panelSam Ravnborg1-1/+1
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
2019-06-28Merge tag 'drm-msm-next-2019-06-25' of ↵Dave Airlie1-76/+73
https://gitlab.freedesktop.org/drm/msm into drm-next + usual progress on cleanups + dsi vs EPROBE_DEFER fixes + msm8998 (snapdragon 835 support) + a540 gpu support (mesa support already landed) + dsi, dsi-phy support + mdp5 and dpu interconnect (bus/memory scaling) support + initial prep work for per-context pagetables (at least the parts that don't have external dependencies like iommu/arm-smmu) There is one more patch for fixing DSI cmd mode panels (part of a set of patches to get things working on nexus5), but it would be conflicty with 1cff7440a86e04a613665803b42034 in drm-next without rebasing or back-merge, and since it doesn't conflict with anything in msm-next, I think it best if Sean merges that through drm-mix-fixes instead. (In other news, I've been making some progress w/ getting efifb working properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff not totally falling over when bootloader enables display and things are already running when driver probes.. but not quite ready yet, hopefully we can post some of that for 5.4.. should help for both the sdm835 and sdm850 laptops.) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsj3N4XzDLSDoa+4RHZ9wXObYmhcep0M3LjnRg48BeLvg@mail.gmail.com
2019-06-20drm/msm/dsi: Move setup_encoder to modeset_initSean Paul1-35/+2
Now that the panel probe/setup is in the modeset path, we can call dsi_manager_setup_encoder() in a common place for both internal and external bridge setups. Reviewed-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-10-sean@poorly.run
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-20 03:37:45 +0000